Convert more of the xRoutes features that were skipped in an earlier PR into ComputedRoutes and make them work:
- DestinationPolicy defaults
- more timeouts
- load balancer policy
- request/response header mutations
- urlrewrite
- GRPCRoute matches
xRoute resource types contain a slice of parentRefs to services that they
manipulate traffic for. All xRoutes that have a parentRef to given Service
will be merged together to generate a ComputedRoutes resource
name-aligned with that Service.
This means that a write of an xRoute with 2 parent ref pointers will cause
at most 2 reconciles for ComputedRoutes.
If that xRoute's list of parentRefs were ever to be reduced, or otherwise
lose an item, that subsequent map event will only emit events for the current
set of refs. The removed ref will not cause the generated ComputedRoutes
related to that service to be re-reconciled to omit the influence of that xRoute.
To combat this, we will store on the ComputedRoutes resource a
BoundResources []*pbresource.Reference field with references to all
resources that were used to influence the generated output.
When the routes controller reconciles, it will use a bimapper to index this
influence, and the dependency mappers for the xRoutes will look
themselves up in that index to discover additional (former) ComputedRoutes
that need to be notified as well.
xRoute resources are not name-aligned with the Services they control. They
have a list of "parent ref" services that they alter traffic flow for, and they
contain a list of "backend ref" services that they direct that traffic to.
The ACLs should be:
- list: (default)
- read:
- ALL service:<parent_ref_service>:read
- write:
- ALL service:<parent_ref_service>:write
- ALL service:<backend_ref_service>:read
DestinationPolicy resources are name-aligned with the Service they control.
The ACLs should be:
- list: (default)
- read: service:<resource_name>:read
- write: service:<resource_name>:write
The ACLs.Read hook for a resource only allows for the identity of a
resource to be passed in for use in authz consideration. For some
resources we wish to allow for the current stored value to dictate how
to enforce the ACLs (such as reading a list of applicable services from
the payload and allowing service:read on any of them to control reading the enclosing resource).
This change update the interface to usually accept a *pbresource.ID,
but if the hook decides it needs more data it returns a sentinel error
and the resource service knows to defer the authz check until after
fetching the data from storage.
* add multiple upstream ports to golden file test for destination builder
* NET-5131 - add unit tests for multiple ported upstreams
* fix merge conflicts
Ensure that configuring a FailoverPolicy for a service that is reachable via a xRoute or a direct upstream causes an envoy aggregate cluster to be created for the original cluster name, but with separate clusters for each one of the possible destinations.
Adding coauthors who mobbed/paired at various points throughout last week.
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: John Murret <john.murret@hashicorp.com>
Co-authored-by: Michael Zalimeni <michael.zalimeni@hashicorp.com>
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: Michael Wilkerson <mwilkerson@hashicorp.com>
Previously, when using implicit upstreams, we'd build outbound listener per destination instead of one for all destinations. This will result in port conflicts when trying to send this config to envoy.
This PR also makes sure that leaf and root references are always added (before we would only add it if there are inbound non-mesh ports).
Also, black-hole traffic when there are no inbound ports other than mesh
HTTPRoute, GRPCRoute, TCPRoute, and Upstreams resources contain inner
Reference fields. We want to ensure that components of those reference Tenancy
fields left unspecified are defaulted using the tenancy of the enclosing resource.
As the underlying helper being used to do the normalization calls the function
modified in #18822, it also means that the PeerName field will be set to "local" for
now automatically to avoid "local" != "" issues downstream.
Reworks the sidecar controller to accept ComputedRoutes as an input and use it to generate appropriate ProxyStateTemplate resources containing L4/L7 mesh configuration.
* Refactors the leafcert package to not have a dependency on agent/consul and agent/cache to avoid import cycles. This way the xds controller can just import the leafcert package to use the leafcert manager.
The leaf cert logic in the controller:
* Sets up watches for leaf certs that are referenced in the ProxyStateTemplate (which generates the leaf certs too).
* Gets the leaf cert from the leaf cert cache
* Stores the leaf cert in the ProxyState that's pushed to xds
* For the cert watches, this PR also uses a bimapper + a thin wrapper to map leaf cert events to related ProxyStateTemplates
Since bimapper uses a resource.Reference or resource.ID to map between two resource types, I've created an internal type for a leaf certificate to use for the resource.Reference, since it's not a v2 resource.
The wrapper allows mapping events to resources (as opposed to mapping resources to resources)
The controller tests:
Unit: Ensure that we resolve leaf cert references
Lifecycle: Ensure that when the CA is updated, the leaf cert is as well
Also adds a new spiffe id type, and adds workload identity and workload identity URI to leaf certs. This is so certs are generated with the new workload identity based SPIFFE id.
* Pulls out some leaf cert test helpers into a helpers file so it
can be used in the xds controller tests.
* Wires up leaf cert manager dependency
* Support getting token from proxytracker
* Add workload identity spiffe id type to the authorize and sign functions
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
This new controller produces an intermediate output (ComputedRoutes) that is meant to summarize all relevant xRoutes and related mesh configuration in an easier-to-use format for downstream use to construct the ProxyStateTemplate.
It also applies status updates to the xRoute resource types to indicate that they are themselves semantically valid inputs.
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Address PR comments
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* PR review comments
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Make sure endpoint refs route to mesh port instead of an app port
* Address PR comments
* fixing copyright
* tidy imports
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* tidy imports
* add copyright headers
* Prefix sidecar proxy test files with source and destination.
* Update controller_test.go
* NET-5132 - Configure multiport routing for connect proxies in TProxy mode
* formatting golden files
* reverting golden files and adding changes in manually. build implicit destinations still has some issues.
* fixing files that were incorrectly repeating the outbound listener
* PR comments
* extract AlpnProtocol naming convention to getAlpnProtocolFromPortName(portName)
* removing address level filtering.
* adding license to resources_test.go
---------
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Address PR comments
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* PR review comments
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Make sure endpoint refs route to mesh port instead of an app port
* Address PR comments
* fixing copyright
* tidy imports
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* tidy imports
* add copyright headers
* Prefix sidecar proxy test files with source and destination.
* Update controller_test.go
---------
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
This commit adds support for transparent proxy to the sidecar proxy controller. As we do not yet support inferring destinations from intentions, this assumes that all services in the cluster are destinations.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* This commit also changes service endpoints to include workload identity. This made the implementation a bit easier as we don't need to look up as many workloads and instead rely on endpoints data.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at <Blog URL>, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* add missing license headers
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
R.B. Boyer
Eric Haberkorn
John Murret
Iryna Shustava
Derek Menteer
Nitya Dhanushkodi
Dhia Ayachi
Semir Patel
Ashwin Venkatesh
hashicorp-copywrite[bot]