* Add additional controller implementations
* remove additional interface
* Fix comparison checks and mark unused contexts
* Switch to time.Now().UTC()
* Add a pointer helper for shadowing loop variables
* Extract anonymous functions for readability
* clean up logging
* Add Type to the Condition proto
* Update some comments and add additional space for readability
* Address PR feedback
* Fix up dirty checks and change to pointer receiver
* Stub out bind code
* Move into a new package and flesh out binding
* Fill in the actual binding logic
* Bind to all listeners if not specified
* Move bind code up to gateways package
* Fix resource type check
* Add UpsertRoute to listeners
* Add RemoveRoute to listener
* Implement binding as associated functions
* Pass in gateways to BindRouteToGateways
* Add a bunch of tests
* Fix hopping from one listener on a gateway to another
* Remove parents from HTTPRoute
* Apply suggestions from code review
* Fix merge conflict
* Unify binding into a single variadic function 🙌 @nathancoleman
* Remove vestigial error
* Add TODO on protocol check
* Stub Config Entries for Consul Native API Gateway (#15644)
* Add empty InlineCertificate struct and protobuf
* apigateway stubs
* Stub HTTPRoute in api pkg
* Stub HTTPRoute in structs pkg
* Simplify api.APIGatewayConfigEntry to be consistent w/ other entries
* Update makeConfigEntry switch, add docstring for HTTPRouteConfigEntry
* Add TCPRoute to MakeConfigEntry, return unique Kind
* Stub BoundAPIGatewayConfigEntry in agent
* Add RaftIndex to APIGatewayConfigEntry stub
* Add new config entry kinds to validation allow-list
* Add RaftIndex to other added config entry stubs
* Update usage metrics assertions to include new cfg entries
* Add Meta and acl.EnterpriseMeta to all new ConfigEntry types
* Remove unnecessary Services field from added config entry types
* Implement GetMeta(), GetEnterpriseMeta() for added config entry types
* Add meta field to proto, name consistently w/ existing config entries
* Format config_entry.proto
* Add initial implementation of CanRead + CanWrite for new config entry types
* Add unit tests for decoding of new config entry types
* Add unit tests for parsing of new config entry types
* Add unit tests for API Gateway config entry ACLs
* Return typed PermissionDeniedError on BoundAPIGateway CanWrite
* Add unit tests for added config entry ACLs
* Add BoundAPIGateway type to AllConfigEntryKinds
* Return proper kind from BoundAPIGateway
* Add docstrings for new config entry types
* Add missing config entry kinds to proto def
* Update usagemetrics_oss_test.go
* Use utility func for returning PermissionDeniedError
* EventPublisher subscriptions for Consul Native API Gateway (#15757)
* Create new event topics in subscribe proto
* Add tests for PBSubscribe func
* Make configs singular, add all configs to PBToStreamSubscribeRequest
* Add snapshot methods
* Add config_entry_events tests
* Add config entry kind to topic for new configs
* Add unit tests for snapshot methods
* Start adding integration test
* Test using the new controller code
* Update agent/consul/state/config_entry_events.go
* Check value of error
* Add controller stubs for API Gateway (#15837)
* update initial stub implementation
* move files, clean up mutex references
* Remove embed, use idiomatic names for constructors
* Remove stray file introduced in merge
* Add APIGateway validation (#15847)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Move struct fields around a bit
* APIGateway InlineCertificate validation (#15856)
* Add APIGateway validation
* Add additional validations
* Add protobuf definitions
* Tabs to spaces
* Add API structs
* Move struct fields around a bit
* Add validation for InlineCertificate
* Fix ACL test
* APIGateway BoundAPIGateway validation (#15858)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Move struct fields around a bit
* Add validation for BoundAPIGateway
* APIGateway TCPRoute validation (#15855)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Add TCPRoute normalization and validation
* Add forgotten Status
* Add some more field docs in api package
* Fix test
* Format imports
* Rename snapshot test variable names
* Add plumbing for Native API GW Subscriptions (#16003)
Co-authored-by: Sarah Alsmiller <sarah.alsmiller@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: sarahalsmiller <100602640+sarahalsmiller@users.noreply.github.com>
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
Previous to this commit, the API response would include Gateway
Addresses in the form `domain.name.:8080`, which due to the addition of
the port is probably not the expected response.
This commit rightTrims any `.` characters from the end of the domain
before formatting the address to include the port resulting in
`domain.name:8080`
Fixes#8466
Since Consul 1.8.0 there was a bug in how ingress gateway protocol
compatibility was enforced. At the point in time that an ingress-gateway
config entry was modified the discovery chain for each upstream was
checked to ensure the ingress gateway protocol matched. Unfortunately
future modifications of other config entries were not validated against
existing ingress-gateway definitions, such as:
1. create tcp ingress-gateway pointing to 'api' (ok)
2. create service-defaults for 'api' setting protocol=http (worked, but not ok)
3. create service-splitter or service-router for 'api' (worked, but caused an agent panic)
If you were to do these in a different order, it would fail without a
crash:
1. create service-defaults for 'api' setting protocol=http (ok)
2. create service-splitter or service-router for 'api' (ok)
3. create tcp ingress-gateway pointing to 'api' (fail with message about
protocol mismatch)
This PR introduces the missing validation. The two new behaviors are:
1. create tcp ingress-gateway pointing to 'api' (ok)
2. (NEW) create service-defaults for 'api' setting protocol=http ("ok" for back compat)
3. (NEW) create service-splitter or service-router for 'api' (fail with
message about protocol mismatch)
In consideration for any existing users that may be inadvertently be
falling into item (2) above, that is now officiall a valid configuration
to be in. For anyone falling into item (3) above while you cannot use
the API to manufacture that scenario anymore, anyone that has old (now
bad) data will still be able to have the agent use them just enough to
generate a new agent/proxycfg error message rather than a panic.
Unfortunately we just don't have enough information to properly fix the
config entries.
Previously, we were only returning a single ListenerPort for a single
service. However, we actually allow a single service to be serviced over
multiple ports, as well as allow users to define what hostnames they
expect their services to be contacted over. When no hosts are defined,
we return the default ingress domain for any configured DNS domain.
To show this in the UI, we modify the gateway-services-nodes API to
return a GatewayConfig.Addresses field, which is a list of addresses
over which the specific service can be contacted.
go test will only run tests in parallel within a single package. In this case the package test run time is exactly the same with or without t.Parallel() (~0.7s).
In generally we should avoid t.Parallel() as it causes a number of problems with `go test` not reporting failure messages correctly. I encountered one of these problems, which is what prompted this change. Since `t.Parallel` is not providing any benefit in this package, this commit removes it.
The change was automated with:
git grep -l 't.Parallel' | xargs sed -i -e '/t.Parallel/d'
We can only allow host names that are valid domain names because we put
these hosts into a DNSSAN. In addition, we validate that the wildcard
specifier '*' is only present as the leftmost label to allow for a
wildcard DNSSAN and associated wildcard Host routing in the ingress
gateway proxy.
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
This makes it so that both OSS and enterprise tests pass correctly
In the api tests, explicitly set namespace to empty string so that tests
can be shared.
* Implements a simple, tcp ingress gateway workflow
This adds a new type of gateway for allowing Ingress traffic into Connect from external services.
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
This config entry will be used to configure terminating gateways.
It accepts the name of the gateway and a list of services the gateway will represent.
For each service users will be able to specify: its name, namespace, and additional options for TLS origination.
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
* Add Ingress gateway config entry and other relevant structs
* Add api package tests for ingress gateways
* Embed EnterpriseMeta into ingress service struct
* Add namespace fields to api module and test consul config write decoding
* Don't require a port for ingress gateways
* Add snakeJSON and camelJSON cases in command test
* Run Normalize on service's ent metadata
Sadly cannot think of a way to test this in OSS.
* Every protocol requires at least 1 service
* Validate ingress protocols
* Update agent/structs/config_entry_gateways.go
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Melisa Griffin
Andrew Stucki
Thomas Eckert
DanStough
Paul Banks
R.B. Boyer
John Cowen
Jack
R.B. Boyer
Chris Piraino
Daniel Nephin
Daniel Nephin
Freddy
Kyle Havlovitz