This is the recommended proxy integration API for listing intentions
which should not require an active connection to the servers to resolve
after the initial cache filling.
This allows for client agent to be run in a more stateless manner where they may be abruptly terminated and not expected to come back. If advertising a per-agent reconnect timeout using the advertise_reconnect_timeout configuration when that agent leaves, other agents will wait only that amount of time for the agent to come back before reaping it.
This has the advantageous side effect of causing servers to deregister the node/services/checks for that agent sooner than if the global reconnect_timeout was used.
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.
- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.
- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.
- Add a new serf feature flag indicating support for
intentions-as-config-entries.
- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.
- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.
- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.
- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
This call appears to only be necessary because reset() was called from
NewMaterializer.
This commit has the constructor set a default value for updateCh, and
removes both the call to reset() from New(), and the call to
notifyUpdateLocked() from reset().
This should ensure that we do not notify the Fetch() call before we have new
values to report.
Refactor of Materializer.Run
Use handlers to manage state in Materializer
Rename Materializer receiver
rename m.l to m.lock, and flip some conditionals to remove the negative.
Improve godoc, rename Deps, move resetErr, and pass err into notifyUpdate
Update for NewSnapshotToFollow events
Refactor to move context cancel out of Materializer
Replace InitFilter with Reset.
Removes the need to store a fatalErr and the cache-type, and removes the need to recreate the filter
each time.
Pass dependencies into MaterializedView.
Remove context from MaterializedView.
Rename state to view.
Rename MaterialziedView to Materialzier.
Rename to NewMaterializer
Pass in retry.Waiter
This adds a new very tiny memdb table and corresponding raft operation
for updating a very small effective map[string]string collection of
"system metadata". This can persistently record a fact about the Consul
state machine itself.
The first use of this feature will come in a later PR.
This new package provides a client agent implementation of an interface
for fetching the health of services.
This approach has a number of benefits:
1. It provides a much more explicit interface. Instead of everything
dependency on `RPC()` and `Cache.Get()` for many unrelated things
they can depend on a type that are named according to the behaviour
it provides.
2. It gives us a single place to vary the behaviour and migrate to
a new form of RPC (gRPC). The current implementation has two options
(cache, or direct RPC), and in the future we will have more.
It is also a great opporunity to start adding `context.Context` args
to these operations, which in the future will allow us to cancel
the operations.
3. As a concequence of the first, in the Server agent where we make
these calls we can replace the current in-memory RPC calls with
a thin adapter for the real method. This removes the `net/rpc`
machinery from the call in places where it is not needed.
This new package is quite small right now, but I think we can expect it
to grow to a more reasonable size as other RPC calls are replaced.
This change also happens to replace two very similar implementations with
a single implementation.
Reduce Jitter to one function
Rename NewRetryWaiter
Fix a bug in calculateWait where maxWait was applied before jitter, which would make it
possible to wait longer than maxWait.
This really only matters for unit tests, since typically if an agent shuts down its server, it follows that up by exiting the process, which would also clean up all of the networking anyway.
The subscribe endpoint needs to be able to inspect the payload to filter
events, and convert them into the protobuf types.
Use the protobuf CatalogOp type for the operation field, for now. In the
future if we end up with multiple interfaces we should be able to remove
the protobuf dependency by changing this to an int32 and adding a test
for the mapping between the values.
Make the value of the payload a concrete type instead of interface{}. We
can create other payloads for other event types.
The router.Manager is already rebalancing servers for other connection pools, so it can call into our resolver to do the same.
This change allows us to remove the serf dependency from resolverBuilder, and remove Datacenter from the config.
Also revert the change to refreshServerRebalanceTimer
It only needs to be refereced from the Router, because there is only 1 instance, and the
Router can call AddServer/RemoveServer like it does on the Manager.
Rename GRPCClient to ClientConnPool. This type appears to be more of a
conn pool than a client. The clients receive the connections from this
pool.
Reduce some dependencies by adjusting the interface baoundaries.
Remove the need to create a second slice of Servers, just to pick one and throw the rest away.
Unexport serverResolver, it is not used outside the package.
Use a RWMutex for ServerResolverBuilder, some locking is read-only.
Add more godoc.
* fix lessThanHalfTime
* get lock for CAProvider()
* make a var to relate both vars
* rename to getCAProviderWithLock
* move CertificateTimeDriftBuffer to agent/connect/ca
In an upcoming change we will need to pass a grpc.ClientConnPool from
BaseDeps into Server. While looking at that change I noticed all of the
existing consulOption fields are already on BaseDeps.
Instead of duplicating the fields, we can create a struct used by
agent/consul, and use that struct in BaseDeps. This allows us to pass
along dependencies without translating them into different
representations.
I also looked at moving all of BaseDeps in agent/consul, however that
created some circular imports. Resolving those cycles wouldn't be too
bad (it was only an error in agent/consul being imported from
cache-types), however this change seems a little better by starting to
introduce some structure to BaseDeps.
This change is also a small step in reducing the scope of Agent.
Also remove some constants that were only used by tests, and move the
relevant comment to where the live configuration is set.
Removed some validation from NewServer and NewClient, as these are not
really runtime errors. They would be code errors, which will cause a
panic anyway, so no reason to handle them specially here.
When calling `GetDatacentersByDistance()` or `GetDatacentersMap()`, an
incorrect condition was used to diplay log message, thus flooding
Consul's logs.
Example of message:
```
[WARN] agent.router: Non-server in server-only area: non_server=myClientNode area=lan
```
This message is only valid for WAN areas, filter to avoid creating
hundreds of logs/s on our clusters, each time someone is calling this
method.
Our logs were flooded by such messages when migrating our Consul servers
from 1.7.7 to 1.8.4.
This will issue fix#8663
Occasionally this test would flake. The flakes were fixed by:
1. Stopping the service and retrying to check on metrics. This way we
also include the active_streams going to 0 in the metric calls.
2. Using a reference to the global Metrics. This way when other tests
have background goroutines that are still shutting down, they won't
emit metrics to the metric instance with the fake Sink. The stats
test can patch the local reference to the global, so the existing
statHandlers will continue to emit to the global, but the stats
test will send all metrics to the replacement.
https server.
In #8234 I changed a few tests to use TestAgent.HTTPAddr() to find the
addr used in the test. Due to the way HTTPAddr() was implemented these
tests were passing, but I think the pass was incidental. HTTPAddr() was
not matching any servers, and was instead returning the last server,
which happened to be the one these tests wanted.
This commit fixes the implementation of HTTPAddr to panic if no match
was found. The tests which require an HTTPS server are changed to use
a new firstAddr() to look up the correct address.
secondaryIntermediateCertRenewalWatch was using `retryLoopBackoff` to
renew the intermediate certificate. Once it entered the inner loop and
started `retryLoopBackoff` it would never leave that.
`retryLoopBackoffAbortOnSuccess` will return when renewing is
successful, like it was intended originally.
The nodeCheck slice was being used as the first arg in append, which in some cases will modify the array backing the slice. This would lead to service checks for other services in the wrong event.
Also refactor some things to reduce the arguments to functions.
Creating a new readTxn does not work because it will not see the newly created objects that are about to be committed. Instead use the active write Txn.
Whenever an upsert/deletion of a config entry happens, within the open
state store transaction we speculatively test compile all discovery
chains that may be affected by the pending modification to verify that
the write would not create an erroneous scenario (such as splitting
traffic to a subset that did not exist).
If a single discovery chain evaluation references two config entries
with the same kind and name in different namespaces then sometimes the
upsert/deletion would be falsely rejected. It does not appear as though
this bug would've let invalid writes through to the state store so the
correction does not require a cleanup phase.
This commit refactors the state store usage code to track unique service
name changes on transaction commit. This means we only need to lookup
usage entries when reading the information, as opposed to iterating over
a large number of service indices.
- Take into account a service instance's name being changed
- Do not iterate through entire list of service instances, we only care
about whether there is 0, 1, or more than 1.
We add a WriteTxn interface for use in updating the usage memdb table,
with the forward-looking prospect of incrementally converting other
functions to accept interfaces.
As well, we use the ReadTxn in new usage code, and as a side effect
convert a couple of existing functions to use that interface as well.
Using the newly provided state store methods, we periodically emit usage
metrics from the servers.
We decided to emit these metrics from all servers, not just the leader,
because that means we do not have to care about leader election flapping
causing metrics turbulence, and it seems reasonable for each server to
emit its own view of the state, even if they should always converge
rapidly.
And into token.Store. This change isolates any awareness of token
persistence in a single place.
It is a small step in allowing Agent.New to accept its dependencies.
This test was only passing because t.Parallel was causing every subtest to run with the last value in the iteration,
which sets a value for all tokens. The test started to fail once t.Parallel was removed, but the same failure could
have been produced by adding 'tt := tt' to the t.Run() func.
These tests run in under 10ms, so there is no reason to use t.Parallel.
This will apply cache throttling parameters are properly applied:
* cache.EntryFetchMaxBurst
* cache.EntryFetchRate
When values are updated, a log is displayed in info.
This might be better handled by allowing configuration for the InMemSink interval and retail, and disabling
the global. For now this is a smaller change to remove the goroutine leak caused by tests because go-metrics
does not provide any way of shutting down the global goroutine.
With this change, Agent.New() accepts many of the dependencies instead
of creating them in New. Accepting fully constructed dependencies from
a constructor makes the type easier to test, and easier to change.
There are still a number of dependencies created in Start() which can
be addressed in a follow up.
During gossip encryption key rotation it would be nice to be able to see if all nodes are using the same key. This PR adds another field to the json response from `GET v1/operator/keyring` which lists the primary keys in use per dc. That way an operator can tell when a key was successfully setup as primary key.
Based on https://github.com/hashicorp/serf/pull/611 to add primary key to list keyring output:
```json
[
{
"WAN": true,
"Datacenter": "dc2",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 6,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 6
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 6
},
"NumNodes": 6
},
{
"WAN": false,
"Datacenter": "dc2",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 8,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"NumNodes": 8
},
{
"WAN": false,
"Datacenter": "dc1",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 3,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"NumNodes": 8
}
]
```
I intentionally did not change the CLI output because I didn't find a good way of displaying this information. There are a couple of options that we could implement later:
* add a flag to show the primary keys
* add a flag to show json output
Fixes#3393.
Previsouly it was done in Agent.Start, which is much later then it needs to be.
The new 'dns' package was required, because otherwise there would be an
import cycle. In the future we should move more of the dns server into
the dns package.
- unexport testing shims, and document their purpose
- resolve a TODO by moving validation to NewBuilder and storing the one
field that is used instead of all of Options
- create a slice with the correct size to avoid extra allocations
While working on another change I caused a bunch of these tests to fail.
Unfortunately the failure messages were not super helpful at first.
One problem was that the request and response were created outside of
the retry. This meant that when the second attempt happened, the request
body was empty (because the buffer had been consumed), and so the
request was not actually being retried. This was fixed by moving more of
the request creation into the retry block.
Another problem was that these functions can return errors in two ways, and
are not consistent about which way they use. Some errors are returned to
the response writer, but the tests were not checking those errors, which
was causing a panic later on. This was fixed by adding a check for the
response code.
Also adds some missing t.Helper(), and has assertIndex use checkIndex so
that it is clear these are the same implementation.
I saw this test flake locally, and it was easy to reproduce with -count=10.
The failure was: 'TestAgent.dns: rpc error: error=No known Consul servers'.
Waiting for the agent seems to fix it.
This commit fixes a test that I saw flake locally while running tests. The test output from the monitor
started immediately after the line the test was looking for.
To fix the problem a channel is closed when the goroutine starts. Shutdown is not called until this channel
is closed, which seems to greatly reduce the chance of a flake.
TestAgent.Key was only used by 3 tests. Extracting it from the common helper that is used in hundreds of
tests helps keep the shared part small and more focused.
This required a second change (which I was planning on making anyway), which was to change the behaviour of
DataDir. Now in all cases the TestAgent will use the DataDir, and clean it up once the test is complete.
There are a couple reasons for this change:
1. agent.go is way too big. Smaller files makes code eaasier to read
because tools that show usage also include filename which can give
a lot more context to someone trying to understand which functions
call other functions.
2. these two functions call into a large number of functions already in
keyring.go.
This is a small step to allowing Agent to accept its dependencies
instead of creating them in New.
There were two fields in autoconfig.Config that were used exclusively
to load config. These were replaced with a single function, allowing us
to move LoadConfig back to the config package.
Also removed the WithX functions for building a Config. Since these were
simple assignment, it appeared we were not getting much value from them.
Making these functions allows us to cleanup how an agent is initialized. They only make use of a config and a logger, so they do not need to be agent methods.
Also cleanup the testing to use t.Run and require.
Fixes#8466
Since Consul 1.8.0 there was a bug in how ingress gateway protocol
compatibility was enforced. At the point in time that an ingress-gateway
config entry was modified the discovery chain for each upstream was
checked to ensure the ingress gateway protocol matched. Unfortunately
future modifications of other config entries were not validated against
existing ingress-gateway definitions, such as:
1. create tcp ingress-gateway pointing to 'api' (ok)
2. create service-defaults for 'api' setting protocol=http (worked, but not ok)
3. create service-splitter or service-router for 'api' (worked, but caused an agent panic)
If you were to do these in a different order, it would fail without a
crash:
1. create service-defaults for 'api' setting protocol=http (ok)
2. create service-splitter or service-router for 'api' (ok)
3. create tcp ingress-gateway pointing to 'api' (fail with message about
protocol mismatch)
This PR introduces the missing validation. The two new behaviors are:
1. create tcp ingress-gateway pointing to 'api' (ok)
2. (NEW) create service-defaults for 'api' setting protocol=http ("ok" for back compat)
3. (NEW) create service-splitter or service-router for 'api' (fail with
message about protocol mismatch)
In consideration for any existing users that may be inadvertently be
falling into item (2) above, that is now officiall a valid configuration
to be in. For anyone falling into item (3) above while you cannot use
the API to manufacture that scenario anymore, anyone that has old (now
bad) data will still be able to have the agent use them just enough to
generate a new agent/proxycfg error message rather than a panic.
Unfortunately we just don't have enough information to properly fix the
config entries.
* changes some functions to return data instead of modifying pointer
arguments
* renames globalRPC() to keyringRPCs() to make its purpose more clear
* restructures KeyringOperation() to make it more understandable
* update bindata_assetfs.go
* Release v1.8.2
* Putting source back into Dev Mode
* changelog: add entries for 1.7.6, 1.7.5 and 1.6.7
Co-authored-by: hashicorp-ci <hashicorp-ci@users.noreply.github.com>
NotifyShutdown was only used for testing. Now that t.Cleanup exists, we
can use that instead of attaching cleanup to the Server shutdown.
The Autopilot test which used NotifyShutdown doesn't need this
notification because Shutdown is synchronous. Waiting for the function
to return is equivalent.
AutoConfig will generate local tokens for clients and the ability to use local tokens is gated off of token replication being enabled and being configured with a replication token. Therefore we already have a hard requirement on having token replication enabled, this commit just makes sure to surface that to the operator instead of having to discern what the issue is from RPC errors.
This code started as an optimization to avoid doing an RPC Ping to
itself. But in a single server cluster the rebalancing was led to
believe that there were no healthy servers because foundHealthyServer
was not set. Now this is being set properly.
Fixes#8401 and #8403.
Now that it is no longer used, we can remove this unnecessary field. This is a pre-step in cleanup up RuntimeConfig->Consul.Config, which is a pre-step to adding a gRPCHandler component to Server for streaming.
Removing this field also allows us to remove one of the return values from logging.Setup.
The main bug was fixed in cb050b280c, but the return value of 'result' is still misleading.
Change the return value to nil to make the code more clear.
Related changes:
- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
Ensure that enabling AutoConfig sets the tls configurator properly
This also refactors the TLS configurator a bit so the naming doesn’t imply only AutoEncrypt as the source of the automatically setup TLS cert info.
Most of the groundwork was laid in previous PRs between adding the cert-monitor package to extracting the logic of signing certificates out of the connect_ca_endpoint.go code and into a method on the server.
This also refactors the auto-config package a bit to split things out into multiple files.
There were several PRs that while all passed CI independently, when they all got merged into the same branch caused compilation errors in test code.
The main changes that caused issues where changing agent/cache.Cache.New to require a concrete options struct instead of a pointer. This broke the cert monitor tests and the catalog_list_services_test.go. Another change was made to unembed the http.Server from the agent.HTTPServer struct. That coupled with another change to add a test to ensure cache rate limiting coming from HTTP requests was working as expected caused compilation failures.
This implements a solution for #7863
It does:
Add a new config cache.entry_fetch_rate to limit the number of calls/s for a given cache entry, default value = rate.Inf
Add cache.entry_fetch_max_burst size of rate limit (default value = 2)
The new configuration now supports the following syntax for instance to allow 1 query every 3s:
command line HCL: -hcl 'cache = { entry_fetch_rate = 0.333}'
in JSON
{
"cache": {
"entry_fetch_rate": 0.333
}
}
Replaces #7559
Running tests in parallel, with background goroutines, results in test output not being associated with the correct test. `go test` does not make any guarantees about output from goroutines being attributed to the correct test case.
Attaching log output from background goroutines also cause data races. If the goroutine outlives the test, it will race with the test being marked done. Previously this was noticed as a panic when logging, but with the race detector enabled it is shown as a data race.
The previous solution did not address the problem of correct test attribution because test output could still be hidden when it was associated with a test that did not fail. You would have to look at all of the log output to find the relevant lines. It also made debugging test failures more difficult because each log line was very long.
This commit attempts a new approach. Instead of printing all the logs, only print when a test fails. This should work well when there are a small number of failures, but may not work well when there are many test failures at the same time. In those cases the failures are unlikely a result of a specific test, and the log output is likely less useful.
All of the logs are printed from the test goroutine, so they should be associated with the correct test.
Also removes some test helpers that were not used, or only had a single caller. Packages which expose many functions with similar names can be difficult to use correctly.
Related:
https://github.com/golang/go/issues/38458 (may be fixed in go1.15)
https://github.com/golang/go/issues/38382#issuecomment-612940030
The rationale behind removing them is that all of our own code (xDS, builtin connect proxy) use the cache notification mechanism. This ensures that the blocking fetch behind the scenes is always executing. Therefore the only way you might go to get a certificate and have to wait is when 1) the request has never been made for that cert before or 2) you are using the v1/agent/connect/ca/leaf API for retrieving the cert yourself.
In the first case, the refresh change doesn’t alter the behavior. In the second case, it can be mitigated by using blocking queries with that API which just like normal cache notification mechanism will cause the blocking fetch to be initiated and to get leaf certs as soon as needed.
If you are not using blocking queries, or Envoy/xDS, or the builtin connect proxy but are retrieving the certs yourself then the HTTP endpoint might take a little longer to respond.
This also renames the RefreshTimeout field on the register options to QueryTimeout to more accurately reflect that it is used for any type that supports blocking queries.
The fallback method would still work but it would get into a state where it would let the certificate expire for 10s before getting a new one. And the new one used the less secure RPC endpoint.
This is also a pretty large refactoring of the auto encrypt code. I was going to write some tests around the certificate monitoring but it was going to be impossible to get a TestAgent configured in such a way that I could write a test that ran in less than an hour or two to exercise the functionality.
Moving the certificate monitoring into its own package will allow for dependency injection and in particular mocking the cache types to control how it hands back certificates and how long those certificates should live. This will allow for exercising the main loop more than would be possible with it coupled so tightly with the Agent.
CheckAlias already had a waitGroup, but the Add() call was happening too late, which was causing a race in tests. The add must happen before the goroutine is started.
CheckHTTP did not have a waitGroup, so I added it to match CheckAlias.
It looks like a lot of the implementation could be shared, and may not need all of channel, waitgroup and bool, but I will leave that refactor for another time.
When the race detector is enabled we see this test fail occasionally. The reordering of execution seems to make it possible for the snapshot splice to happen before any events are published to the topicBuffers.
We can handle this case in the test the same way it is handled by a subscription, by proceeding to the next event.
This change was mostly automated with the following
First generate a list of functions with:
git grep -o 'Store) \([^(]\+\)(tx \*txn' ./agent/consul/state | awk '{print $2}' | grep -o '^[^(]\+'
Then the list was curated a bit with trial/error to remove and add funcs
as necessary.
Finally the replacement was done with:
dir=agent/consul/state
file=${1-funcnames}
while read fn; do
echo "$fn"
sed -i -e "s/(s \*Store) $fn(/$fn(/" $dir/*.go
sed -i -e "s/s\.$fn(/$fn(/" $dir/*.go
sed -i -e "s/s\.store\.$fn(/$fn(/" $dir/*.go
done < $file
Making these functions allows them to be used without introducing
an artificial dependency on the struct. Many of these will be called
from streaming Event processors, which do not have a store.
This change is being made ahead of the streaming work to get to reduce
the size of the streaming diff.
Move the subscription context to Next. context.Context should generally
never be stored in a struct because it makes that struct only valid
while the context is valid. This is rarely obvious from the caller.
Adds a forceClosed channel in place of the old context, and uses the new
context as a way for the caller to stop the Subscription blocking.
Remove some recursion out of bufferImte.Next. The caller is already looping so we can continue
in that loop instead of recursing. This ensures currentItem is updated immediately (which probably
does not matter in practice), and also removes the chance that we overflow the stack.
NextNoBlock and FollowAfter do not need to handle bufferItem.Err, the caller already
handles it.
Moves filter to a method to simplify Next, and more explicitly separate filtering from looping.
Also improve some godoc
Only unwrap itemBuffer.Err when necessary
EventPublisher was receiving TopicHandlers, which had a couple of
problems:
- ChangeProcessors were being grouped by Topic, but they completely
ignored the topic and were performed on every change
- ChangeProcessors required EventPublisher to be aware of database
changes
By moving ChangeProcesors out of EventPublisher, and having Publish
accept events instead of changes, EventPublisher no longer needs to
be aware of these things.
Handlers is now only SnapshotHandlers, which are still mapped by Topic.
Also allows us to remove the small 'db' package that had only two types.
They can now be unexported types in state.
The EventPublisher is the central hub of the PubSub system. It is toughly coupled with much of
stream. Some stream internals were exported exclusively for EventPublisher.
The two Subscribe cases (with or without index) were also awkwardly split between two packages. By
moving EventPublisher into stream they are now both in the same package (although still in different files).
Also store the index in Changes instead of the Txn.
This change is in preparation for movinng EventPublisher to the stream package, and
making handleACLUpdates async once again.
It is critical that Unsubscribe be called with the same pointer to a
SubscriptionRequest that was used to create the Subscription. The
docstring made that clear, but it sill allowed a caler to get it wrong by
creating a new SubscriptionRequest.
By hiding this detail from the caller, and only exposing an Unsubscribe
method, it should be impossible to fail to Unsubscribe.
Also update some godoc strings.
Use a separate lock for subscriptions.ByToken to allow it to happen synchronously
in the commit flow.
This removes the need to create a new txn for the goroutine, and removes
the need for EventPublisher to contain a reference to DB.
Many of the fields are only needed in one place, and by using a closure
they can be removed from the struct. This reduces the scope of the variables
making it esier to see how they are used.
Otherwise the test will run with exactly the same values each time.
By printing the seed we can attempt to reproduce the test by adding an env var to override the seed
Make topicRegistry use functions instead of unbound methods
Use a regular memDB in EventPublisher to remove a reference cycle
Removes the need for EventPublisher to use a store
Also remove secretHash, which was used to hash tokens. We don't expose
these tokens anywhere, so we can use the string itself instead of a
Hash.
Fix acl_events_test.go for storing a structs type.
This is instead of having the AutoConfigBackend interface provide functions for retrieving them.
NOTE: the config is not reloadable. For now this is fine as we don’t look at any reloadable fields. If that changes then we should provide a way to make it reloadable.
A port can be sent in the Host header as defined in the HTTP RFC, so we
take any hosts that we want to match traffic to and also add another
host with the listener port added.
Also fix an issue with envoy integration tests not running the
case-ingress-gateway-tls test.
In all cases (oss/ent, client/server) this method was returning a value from config. Since the
value is consistent, it doesn't need to be part of the delegate interface.
Fixes#7527
I want to highlight this and explain what I think the implications are and make sure we are aware:
* `HTTPConnStateFunc` closes the connection when it is beyond the limit. `Close` does not block.
* `HTTPConnStateFuncWithDefault429Handler(10 * time.Millisecond)` blocks until the following is done (worst case):
1) `conn.SetDeadline(10*time.Millisecond)` so that
2) `conn.Write(429error)` is guaranteed to timeout after 10ms, so that the http 429 can be written and
3) `conn.Close` can happen
The implication of this change is that accepting any new connection is worst case delayed by 10ms. But only after a client reached the limit already.
The embedded HTTPServer struct is not used by the large HTTPServer
struct. It is used by tests and the agent. This change is a small first
step in the process of removing that field.
The eventual goal is to reduce the scope of HTTPServer making it easier
to test, and split into separate packages.
A query made with AllowNotModifiedResponse and a MinIndex, where the
result has the same Index as MinIndex, will return an empty response
with QueryMeta.NotModified set to true.
Co-authored-by: Pierre Souchay <pierresouchay@users.noreply.github.com>
Also fix a bug where Consul could segfault if TLS was enabled but no client certificate was provided. How no one has reported this as a problem I am not sure.
The initial auto encrypt CSR wasn’t containing the user supplied IP and DNS SANs. This fixes that. Also We were configuring a default :: IP SAN. This should be ::1 instead and was fixed.
Highlights:
- add new endpoint to query for intentions by exact match
- using this endpoint from the CLI instead of the dump+filter approach
- enforcing that OSS can only read/write intentions with a SourceNS or
DestinationNS field of "default".
- preexisting OSS intentions with now-invalid namespace fields will
delete those intentions on initial election or for wildcard namespaces
an attempt will be made to downgrade them to "default" unless one
exists.
- also allow the '-namespace' CLI arg on all of the intention subcommands
- update lots of docs
Split up unused key validation in config entry decode for oss/ent.
This is needed so that we can return an informative error in OSS if namespaces are provided.
Previously, we were only returning a single ListenerPort for a single
service. However, we actually allow a single service to be serviced over
multiple ports, as well as allow users to define what hostnames they
expect their services to be contacted over. When no hosts are defined,
we return the default ingress domain for any configured DNS domain.
To show this in the UI, we modify the gateway-services-nodes API to
return a GatewayConfig.Addresses field, which is a list of addresses
over which the specific service can be contacted.
This is in its own separate package so that it will be a separate test binary that runs thus isolating the go runtime from other tests and allowing accurate go routine leak checking.
This test would ideally use goleak.VerifyTestMain but that will fail 100% of the time due to some architectural things (blocking queries and net/rpc uncancellability).
This test is not comprehensive. We should enable/exercise more features and more cluster configurations. However its a start.
The old test case was a very specific regresion test for a case that is no longer possible.
Replaced with a new test that checks the default coordinate is returned.
We needed to pass a cancellable context into the limiter.Wait instead of context.Background. So I made the func take a context instead of a chan as most places were just passing through a Done chan from a context anyways.
Fix go routine leak in the gateway locator
This will allow to increase cache value when DC is not valid (aka
return SOA to avoid too many consecutive requests) and will
distinguish DC being temporarily not available from DC not existing.
Implements https://github.com/hashicorp/consul/issues/8102
On the servers they must have a certificate.
On the clients they just have to set verify_outgoing to true to attempt TLS connections for RPCs.
Eventually we may relax these restrictions but right now all of the settings we push down (acl tokens, acl related settings, certificates, gossip key) are sensitive and shouldn’t be transmitted over an unencrypted connection. Our guides and docs should recoommend verify_server_hostname on the clients as well.
Another reason to do this is weird things happen when making an insecure RPC when TLS is not enabled. Basically it tries TLS anyways. We should probably fix that to make it clearer what is going on.
The envisioned changes would allow extra settings to enable dynamically defined auth methods to be used instead of or in addition to the statically defined one in the configuration.
There are a couple of things in here.
First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism.
This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.
Kyle Havlovitz
Paul Banks
Daniel Nephin
Freddy
Kit Patella
R.B. Boyer
hashicorp-ci
Matt Keeler
freddygv
Aliaksandr Mianzhynski
Hans Hasselberg
Alexander Mykolaichuk
Mike Morris
Pierre Souchay
Chris Piraino
Jack
André Cruz
Matt Keeler
Pierre Souchay
Paul Coignet
André
Yury Evtikhov
gitforbit