Now that peered upstreams can generate envoy resources (#13758), we need a way to disambiguate local from peered resources in our metrics. The key difference is that datacenter and partition will be replaced with peer, since in the context of peered resources partition is ambiguous (could refer to the partition in a remote cluster or one that exists locally). The partition and datacenter of the proxy will always be that of the source service.
Regexes were updated to make emitting datacenter and partition labels mutually exclusive with peer labels.
Listener filter names were updated to better match the existing regex.
Cluster names assigned to peered upstreams were updated to be synthesized from local peer name (it previously used the externally provided primary SNI, which contained the peer name from the other side of the peering). Integration tests were updated to assert for the new peer labels.
Peered upstreams has a separate loop in xds from discovery chain upstreams. This PR adds similar but slightly modified code to add filters for peered upstream listeners, clusters, and endpoints in the case of transparent proxy.
When the protocol is http-like, and an intention has a peered source
then the normal RBAC mTLS SAN field check is replaces with a joint combo
of:
mTLS SAN field must be the service's local mesh gateway leaf cert
AND
the first XFCC header (from the MGW) must have a URI field that matches the original intention source
Also:
- Update the regex program limit to be much higher than the teeny
defaults, since the RBAC regex constructions are more complicated now.
- Fix a few stray panics in xds generation.
This is only configured in xDS when a service with an L7 protocol is
exported.
They also load any relevant trust bundles for the peered services to
eventually use for L7 SPIFFE validation during mTLS termination.
When converting from Consul intentions to xds RBAC rules, services imported from other peers must encode additional data like partition (from the remote cluster) and trust domain.
This PR updates the PeeringTrustBundle to hold the sending side's local partition as ExportedPartition. It also updates RBAC code to encode SpiffeIDs of imported services with the ExportedPartition and TrustDomain.
Mesh gateways will now enable tcp connections with SNI names including peering information so that those connections may be proxied.
Note: this does not change the callers to use these mesh gateways.
This is the OSS portion of enterprise PR 1994
Rather than directly interrogating the agent-local state for HTTP
checks using the `HTTPCheckFetcher` interface, we now rely on the
config snapshot containing the checks.
This reduces the number of changes required to support server xDS
sessions.
It's not clear why the fetching approach was introduced in
931d167ebb.
Envoy's SPIFFE certificate validation extension allows for us to
validate against different root certificates depending on the trust
domain of the dialing proxy.
If there are any trust bundles from peers in the config snapshot then we
use the SPIFFE validator as the validation context, rather than the
usual TrustedCA.
The injected validation config includes the local root certificates as
well.
For mTLS to work between two proxies in peered clusters with different root CAs,
proxies need to configure their outbound listener to use different root certificates
for validation.
Up until peering was introduced proxies would only ever use one set of root certificates
to validate all mesh traffic, both inbound and outbound. Now an upstream proxy
may have a leaf certificate signed by a CA that's different from the dialing proxy's.
This PR makes changes to proxycfg and xds so that the upstream TLS validation
uses different root certificates depending on which cluster is being dialed.
Description
Add x-fowarded-client-cert information on trusted incoming connections.
Envoy provides support forwarding and annotating the
x-forwarded-client-cert header via the forward_client_cert_details
set_current_client_cert_details filter fields. It would be helpful for
consul to support this directly in its config. The escape hatches are
a bit cumbersome for this purpose.
This has been implemented on incoming connections to envoy. Outgoing
(from the local service through the sidecar) will not have a
certificate, and so are left alone.
A service on an incoming connection will now get headers something like this:
```
X-Forwarded-Client-Cert:[By=spiffe://efad7282-d9b2-3298-f6d8-38b37fb58df3.consul/ns/default/dc/dc1/svc/counting;Hash=61ad5cbdfcb50f5a3ec0ca60923d61613c149a9d4495010a64175c05a0268ab2;Cert="-----BEGIN%20CERTIFICATE-----%0AMIICHDCCAcOgAwIBAgIBCDAKBggqhkjOPQQDAjAxMS8wLQYDVQQDEyZwcmktMTli%0AYXdyb2YuY29uc3VsLmNhLmVmYWQ3MjgyLmNvbnN1bDAeFw0yMjA0MjkwMzE0NTBa%0AFw0yMjA1MDIwMzE0NTBaMAAwWTATBgcqhkjOPQIBBggqhkjOPQMBBwNCAARVIZ7Y%0AZEXfbOGBfxGa7Vuok1MIng%2FuzLQK2xLVlSTIPDbO5hstTGP%2B%2FGx182PYFP3jYqk5%0Aq6rYWe1wiPNMA30Io4H8MIH5MA4GA1UdDwEB%2FwQEAwIDuDAdBgNVHSUEFjAUBggr%0ABgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH%2FBAIwADApBgNVHQ4EIgQgrp4q50oX%0AHHghMbxz5Bk8OJFWMdfgH0Upr350WlhyxvkwKwYDVR0jBCQwIoAgUe6uERAIj%2FLM%0AyuFzDc3Wbp9TGAKBJYAwyhF14ToOQCMwYgYDVR0RAQH%2FBFgwVoZUc3BpZmZlOi8v%0AZWZhZDcyODItZDliMi0zMjk4LWY2ZDgtMzhiMzdmYjU4ZGYzLmNvbnN1bC9ucy9k%0AZWZhdWx0L2RjL2RjMS9zdmMvZGFzaGJvYXJkMAoGCCqGSM49BAMCA0cAMEQCIDwb%0AFlchufggNTijnQ5SUcvTZrWlZyq%2FrdVC20nbbmWLAiAVshNNv1xBqJI1NmY2HI9n%0AgRMfb8aEPVSuxEHhqy57eQ%3D%3D%0A-----END%20CERTIFICATE-----%0A";Chain="-----BEGIN%20CERTIFICATE-----%0AMIICHDCCAcOgAwIBAgIBCDAKBggqhkjOPQQDAjAxMS8wLQYDVQQDEyZwcmktMTli%0AYXdyb2YuY29uc3VsLmNhLmVmYWQ3MjgyLmNvbnN1bDAeFw0yMjA0MjkwMzE0NTBa%0AFw0yMjA1MDIwMzE0NTBaMAAwWTATBgcqhkjOPQIBBggqhkjOPQMBBwNCAARVIZ7Y%0AZEXfbOGBfxGa7Vuok1MIng%2FuzLQK2xLVlSTIPDbO5hstTGP%2B%2FGx182PYFP3jYqk5%0Aq6rYWe1wiPNMA30Io4H8MIH5MA4GA1UdDwEB%2FwQEAwIDuDAdBgNVHSUEFjAUBggr%0ABgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH%2FBAIwADApBgNVHQ4EIgQgrp4q50oX%0AHHghMbxz5Bk8OJFWMdfgH0Upr350WlhyxvkwKwYDVR0jBCQwIoAgUe6uERAIj%2FLM%0AyuFzDc3Wbp9TGAKBJYAwyhF14ToOQCMwYgYDVR0RAQH%2FBFgwVoZUc3BpZmZlOi8v%0AZWZhZDcyODItZDliMi0zMjk4LWY2ZDgtMzhiMzdmYjU4ZGYzLmNvbnN1bC9ucy9k%0AZWZhdWx0L2RjL2RjMS9zdmMvZGFzaGJvYXJkMAoGCCqGSM49BAMCA0cAMEQCIDwb%0AFlchufggNTijnQ5SUcvTZrWlZyq%2FrdVC20nbbmWLAiAVshNNv1xBqJI1NmY2HI9n%0AgRMfb8aEPVSuxEHhqy57eQ%3D%3D%0A-----END%20CERTIFICATE-----%0A";Subject="";URI=spiffe://efad7282-d9b2-3298-f6d8-38b37fb58df3.consul/ns/default/dc/dc1/svc/dashboard]
```
Closes#12852
- `tls.incoming`: applies to the inbound mTLS targeting the public
listener on `connect-proxy` and `terminating-gateway` envoy instances
- `tls.outgoing`: applies to the outbound mTLS dialing upstreams from
`connect-proxy` and `ingress-gateway` envoy instances
Fixes#11966
Due to timing, a transparent proxy could have two upstreams to dial
directly with the same address.
For example:
- The orders service can dial upstreams shipping and payment directly.
- An instance of shipping at address 10.0.0.1 is deregistered.
- Payments is scaled up and scheduled to have address 10.0.0.1.
- The orders service receives the event for the new payments instance
before seeing the deregistration for the shipping instance. At this
point two upstreams have the same passthrough address and Envoy will
reject the listener configuration.
To disambiguate this commit considers the Raft index when storing
passthrough addresses. In the example above, 10.0.0.1 would only be
associated with the newer payments service instance.
Transparent proxies can set up filter chains that allow direct
connections to upstream service instances. Services that can be dialed
directly are stored in the PassthroughUpstreams map of the proxycfg
snapshot.
Previously these addresses were not being cleaned up based on new
service health data. The list of addresses associated with an upstream
service would only ever grow.
As services scale up and down, eventually they will have instances
assigned to an IP that was previously assigned to a different service.
When IP addresses are duplicated across filter chain match rules the
listener config will be rejected by Envoy.
This commit updates the proxycfg snapshot management so that passthrough
addresses can get cleaned up when no longer associated with a given
upstream.
There is still the possibility of a race condition here where due to
timing an address is shared between multiple passthrough upstreams.
That concern is mitigated by #12195, but will be further addressed
in a follow-up.
The gist here is that now we use a value-type struct proxycfg.UpstreamID
as the map key in ConfigSnapshot maps where we used to use "upstream
id-ish" strings. These are internal only and used just for bidirectional
trips through the agent cache keyspace (like the discovery chain target
struct).
For the few places where the upstream id needs to be projected into xDS,
that's what (proxycfg.UpstreamID).EnvoyID() is for. This lets us ALWAYS
inject the partition and namespace into these things without making
stuff like the golden testdata diverge.
* xds: refactor ingress listener SDS configuration
* xds: update resolveListenerSDS call args in listeners_test
* ingress: add TLS min, max and cipher suites to GatewayTLSConfig
* xds: implement envoyTLSVersions and envoyTLSCipherSuites
* xds: merge TLS config
* xds: configure TLS parameters with ingress TLS context from leaf
* xds: nil check in resolveListenerTLSConfig validation
* xds: nil check in makeTLSParameters* functions
* changelog: add entry for TLS params on ingress config entries
* xds: remove indirection for TLS params in TLSConfig structs
* xds: return tlsContext, nil instead of ambiguous err
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* xds: switch zero checks to types.TLSVersionUnspecified
* ingress: add validation for ingress config entry TLS params
* ingress: validate listener TLS config
* xds: add basic ingress with TLS params tests
* xds: add ingress listeners mixed TLS min version defaults precedence test
* xds: add more explicit tests for ingress listeners inheriting gateway defaults
* xds: add test for single TLS listener on gateway without TLS defaults
* xds: regen golden files for TLSVersionInvalid zero value, add TLSVersionAuto listener test
* types/tls: change TLSVersion to string
* types/tls: update TLSCipherSuite to string type
* types/tls: implement validation functions for TLSVersion and TLSCipherSuites, make some maps private
* api: add TLS params to GatewayTLSConfig, add tests
* api: add TLSMinVersion to ingress gateway config entry test JSON
* xds: switch to Envoy TLS cipher suite encoding from types package
* xds: fixup validation for TLSv1_3 min version with cipher suites
* add some kitchen sink tests and add a missing struct tag
* xds: check if mergedCfg.TLSVersion is in TLSVersionsWithConfigurableCipherSuites
* xds: update connectTLSEnabled comment
* xds: remove unsued resolveGatewayServiceTLSConfig function
* xds: add makeCommonTLSContextFromLeafWithoutParams
* types/tls: add LessThan comparator function for concrete values
* types/tls: change tlsVersions validation map from string to TLSVersion keys
* types/tls: remove unused envoyTLSCipherSuites
* types/tls: enable chacha20 cipher suites for Consul agent
* types/tls: remove insecure cipher suites from allowed config
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 and TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 are both explicitly listed as insecure and disabled in the Go source.
Refs https://cs.opensource.google/go/go/+/refs/tags/go1.17.3:src/crypto/tls/cipher_suites.go;l=329-330
* types/tls: add ValidateConsulAgentCipherSuites function, make direct lookup map private
* types/tls: return all unmatched cipher suites in validation errors
* xds: check that Envoy API value matching TLS version is found when building TlsParameters
* types/tls: check that value is found in map before appending to slice in MarshalEnvoyTLSCipherSuiteStrings
* types/tls: cast to string rather than fmt.Printf in TLSCihperSuite.String()
* xds: add TLSVersionUnspecified to list of configurable cipher suites
* structs: update note about config entry warning
* xds: remove TLS min version cipher suite unconfigurable test placeholder
* types/tls: update tests to remove assumption about private map values
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Previously we could get into a state where discovery chain entries were
not cleaned up after the associated watch was cancelled. These changes
add handling for that case where stray chain references are encountered.
The duo of `makeUpstreamFilterChainForDiscoveryChain` and `makeListenerForDiscoveryChain` were really hard to reason about, and led to concealing a bug in their branching logic. There were several issues here:
- They tried to accomplish too much: determining filter name, cluster name, and whether RDS should be used.
- They embedded logic to handle significantly different kinds of upstream listeners (passthrough, prepared query, typical services, and catch-all)
- They needed to coalesce different data sources (Upstream and CompiledDiscoveryChain)
Rather than handling all of those tasks inside of these functions, this PR pulls out the RDS/clusterName/filterName logic.
This refactor also fixed a bug with the handling of [UpstreamDefaults](https://www.consul.io/docs/connect/config-entries/service-defaults#defaults). These defaults get stored as UpstreamConfig in the proxy snapshot with a DestinationName of "*", since they apply to all upstreams. However, this wildcard destination name must not be used when creating the name of the associated upstream cluster. The coalescing logic in the original functions here was in some situations creating clusters with a `*.` prefix, which is not a valid destination.
Chris S. Kim
DanStough
R.B. Boyer
Dan Upton
Freddy
Kyle Havlovitz
Mark Anderson
Evan Culver
freddygv
Mike Morris
Paul Banks
Dhia Ayachi