* Fix issue where terminating gateway service resolvers weren't properly cleaned up
* Add integration test for cleaning up resolvers
* Add changelog entry
* Use state test and drop integration test
* test(gateways): add API Gateway HTTPRoute ParentRef change test
* test(gateways): add checkRouteError helper
* test(gateways): remove EOF check
in CI this seems to sometimes be 'connection reset by peer' instead
* Update test/integration/consul-container/test/gateways/http_route_test.go
* wip, proof of concept, gateway service being registered, don't know how to hit it
* checkpoint
* Fix up API Gateway go tests (#16297)
* checkpoint, getting InvalidDiscoveryChain route protocol does not match targeted service protocol
* checkpoint
* httproute hittable
* tests working, one header test failing
* differentiate services by status code, minor cleanup
* working tests
* updated GetPort interface
* fix getport
---------
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
* Include secret type when building resources from config snapshot
* First pass at generating envoy secrets from api-gateway snapshot
* Update comments for xDS update order
* Add secret type + corresponding golden files to existing tests
* Initialize test helpers for testing api-gateway resource generation
* Generate golden files for new api-gateway xDS resource test
* Support ADS for TLS certificates on api-gateway
* Configure TLS on api-gateway listeners
* Inline TLS cert code
* update tests
* Add SNI support so we can have multiple certificates
* Remove commented out section from helper
* regen deep-copy
* Add tcp tls test
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Simple API Gateway e2e test for tcp routes
* Drop DNSSans since we don't front the Gateway with a leaf cert
* WIP listener tests for api-gateway
* Return early if no routes
* Add back in leaf cert to testing
* Fix merge conflicts
* Re-add kind to setup
* Fix iteration over listener upstreams
* New tcp listener test
* Add tests for API Gateway with TCP and HTTP routes
* Move zero-route check back
* Drop generateIngressDNSSANs
* Check for chains not routes
---------
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
* draft
* expose internal admin port and add proxy test
* update tests
* move comment
* add failure case, fix lint issues
* cleanup
* handle error
* revert changes to service interface
* address review comments
* fix merge conflict
* merge the tests so cluster is created once
* fix other test
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* [API Gateway] Add integration test for HTTP routes
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* PR suggestions
Prior to this commit, secondary datacenters could not be initialized
as peering acceptors if ACLs were enabled. This is due to the fact that
internal server-to-server API calls would fail because the management
token was not generated. This PR makes it so that both primary and
secondary datacenters generate their own management token whenever
a leader is elected in their respective clusters.
1. Upgraded agent can inherit the persisted token and join the cluster
2. Agent token prior to upgrade is still valid after upgrade
3. Enable ACL in the agent configuration
* rate limit test
* Have tests for the 3 modes
* added assertions for logs and metrics
* add comments to test sections
* add check for rate limit exceeded text in log assertion section.
* fix linting error
* updating test to use KV get and put. move log assertion tolast.
* Adding logging for blocking messages in enforcing mode. refactoring tests.
* modified test description
* formatting
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* Update test/integration/consul-container/test/ratelimit/ratelimit_test.go
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* expand log checking so that it ensures both logs are they when they are supposed to be and not there when they are not expected to be.
* add retry on test
* Warn once when rate limit exceed regardless of enforcing vs permissive.
* Update test/integration/consul-container/test/ratelimit/ratelimit_test.go
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
- remove dep on consul main module
- use 'consul tls' subcommands instead of tlsutil
- use direct json config construction instead of agent/config structs
- merge libcluster and libagent packages together
- more widely use BuildContext
- get the OSS/ENT runner stuff working properly
- reduce some flakiness
- fix some correctness related to http/https API
* Protobuf Modernization
Remove direct usage of golang/protobuf in favor of google.golang.org/protobuf
Marshallers (protobuf and json) needed some changes to account for different APIs.
Moved to using the google.golang.org/protobuf/types/known/* for the well known types including replacing some custom Struct manipulation with whats available in the structpb well known type package.
This also updates our devtools script to install protoc-gen-go from the right location so that files it generates conform to the correct interfaces.
* Fix go-mod-tidy make target to work on all modules
* Refactoring the peering integ test to accommodate coming changes of other upgrade scenarios.
- Add a utils package under test that contains methods to set up various test scenarios.
- Deduplication: have a single CreatingPeeringClusterAndSetup replace
CreatingAcceptingClusterAndSetup and CreateDialingClusterAndSetup.
- Separate peering cluster creation and server registration.
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Adds automation for generating the map of `gRPC Method Name → Rate Limit Type`
used by the middleware introduced in #15550, and will ensure we don't forget
to add new endpoints.
Engineers must annotate their RPCs in the proto file like so:
```
rpc Foo(FooRequest) returns (FooResponse) {
option (consul.internal.ratelimit.spec) = {
operation_type: READ,
};
}
```
When they run `make proto` a protoc plugin `protoc-gen-consul-rate-limit` will
be installed that writes rate-limit specs as a JSON array to a file called
`.ratelimit.tmp` (one per protobuf package/directory).
After running Buf, `make proto` will execute a post-process script that will
ingest all of the `.ratelimit.tmp` files and generate a Go file containing the
mappings in the `agent/grpc-middleware` package. In the enterprise repository,
it will write an additional file with the enterprise-only endpoints.
If an engineer forgets to add the annotation to a new RPC, the plugin will
return an error like so:
```
RPC Foo is missing rate-limit specification, fix it with:
import "proto-public/annotations/ratelimit/ratelimit.proto";
service Bar {
rpc Foo(...) returns (...) {
option (hashicorp.consul.internal.ratelimit.spec) = {
operation_type: OPERATION_READ | OPERATION_WRITE | OPERATION_EXEMPT,
};
}
}
```
In the future, this annotation can be extended to support rate-limit
category (e.g. KV vs Catalog) and to determine the retry policy.
* feat(ingress-gateway): support outlier detection of upstream service for ingress gateway
* changelog
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
* integ-test: fix flaky test - case-cfg-splitter-peering-ingress-gateways
* add retry peering to all peering cases
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* integ-test: test consul upgrade from the snapshot of a running cluster
* use Target version as default
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* update go version to 1.18 for api and sdk, go mod tidy
* removes ioutil usage everywhere which was deprecated in go1.16 in favour of io and os packages. Also introduces a lint rule which forbids use of ioutil going forward.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
This is instead of the current behavior where we feed the config entries in using the config_entries.bootstrap configuration which oddly races against other setup code in some circumstances.
I converted ALL tests to explicitly create config entries.
The integration test TestEnvoy/case-ingress-gateway-multiple-services is flaky
and this possibly reduces the flakiness by explicitly waiting for services to show
up in the catalog as healthy before waiting for them to show up in envoy as
healthy which gives it just a bit more time to sync.
* updating to serf v0.10.1 and memberlist v0.5.0 to get memberlist size metrics and memberlist broadcast queue depth metric
* update changelog
* update changelog
* correcting changelog
* adding "QueueCheckInterval" for memberlist to test
* updating integration test containers to grab latest api
more readable in CI.
```
Running primary verification step for case-ingress-gateway-multiple-services...
�[34;1mverify.bats
�[0m�[1G ingress proxy admin is up on :20000�[K�[75G 1/12�[2G�[1G ✓ ingress proxy admin is up on :20000�[K
�[0m�[1G s1 proxy admin is up on :19000�[K�[75G 2/12�[2G�[1G ✓ s1 proxy admin is up on :19000�[K
�[0m�[1G s2 proxy admin is up on :19001�[K�[75G 3/12�[2G�[1G ✓ s2 proxy admin is up on :19001�[K
�[0m�[1G s1 proxy listener should be up and have right cert�[K�[75G 4/12�[2G�[1G ✓ s1 proxy listener should be up and have right cert�[K
�[0m�[1G s2 proxy listener should be up and have right cert�[K�[75G 5/12�[2G�[1G ✓ s2 proxy listener should be up and have right cert�[K
�[0m�[1G ingress-gateway should have healthy endpoints for s1�[K�[75G 6/12�[2G�[31;1m�[1G ✗ ingress-gateway should have healthy endpoints for s1�[K
�[0m�[31;22m (from function `assert_upstream_has_endpoints_in_status' in file /workdir/primary/bats/helpers.bash, line 385,
```
versus
```
Running primary verification step for case-ingress-gateway-multiple-services...
1..12
ok 1 ingress proxy admin is up on :20000
ok 2 s1 proxy admin is up on :19000
ok 3 s2 proxy admin is up on :19001
ok 4 s1 proxy listener should be up and have right cert
ok 5 s2 proxy listener should be up and have right cert
not ok 6 ingress-gateway should have healthy endpoints for s1
not ok 7 s1 proxy should have been configured with max_connections in services
ok 8 ingress-gateway should have healthy endpoints for s2
```
* feat(ingress gateway: support configuring limits in ingress-gateway config entry
- a new Defaults field with max_connections, max_pending_connections, max_requests
is added to ingress gateway config entry
- new field max_connections, max_pending_connections, max_requests in
individual services to overwrite the value in Default
- added unit test and integration test
- updated doc
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Without this change, you'd see this error:
```
./run-tests.sh: line 49: LAMBDA_TESTS_ENABLED: unbound variable
./run-tests.sh: line 49: LAMBDA_TESTS_ENABLED: unbound variable
```
Locally, always run integration tests using amd64, even if running
on an arm mac. This ensures the architecture locally always matches
the CI/CD environment.
In addition:
* Use consul:local for envoy integration and upgrade tests. Previously,
consul:local was used for upgrade tests and consul-dev for integration
tests. I didn't see a reason to use separate images as it's more
confusing.
* By default, disable the requirement that aws credentials are set.
These are only needed for the lambda tests and make it so you
can't run any tests locally, even if you're not running the
lambda tests. Now they'll only run if the LAMBDA_TESTS_ENABLED
env var is set.
* Split out the building of the Docker image for integration
tests into its own target from `dev-docker`. This allows us to always
use an amd64 image without messing up the `dev-docker` target.
* Add support for passing GO_TEST_FLAGs to `test-envoy-integ` target.
* Add a wait_for_leader function because tests were failing locally
without it.
* defaulting to false because peering will be released as beta
* Ignore peering disabled error in bundles cachetype
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: freddygv <freddy@hashicorp.com>
Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>
Now that peered upstreams can generate envoy resources (#13758), we need a way to disambiguate local from peered resources in our metrics. The key difference is that datacenter and partition will be replaced with peer, since in the context of peered resources partition is ambiguous (could refer to the partition in a remote cluster or one that exists locally). The partition and datacenter of the proxy will always be that of the source service.
Regexes were updated to make emitting datacenter and partition labels mutually exclusive with peer labels.
Listener filter names were updated to better match the existing regex.
Cluster names assigned to peered upstreams were updated to be synthesized from local peer name (it previously used the externally provided primary SNI, which contained the peer name from the other side of the peering). Integration tests were updated to assert for the new peer labels.
Ensure that the peer stream replication rpc can successfully be used with TLS activated.
Also:
- If key material is configured for the gRPC port but HTTPS is not
enabled now TLS will still be activated for the gRPC port.
- peerstream replication stream opened by the establishing-side will now
ignore grpc.WithBlock so that TLS errors will bubble up instead of
being awkwardly delayed or suppressed
Peer replication is intended to be between separate Consul installs and
effectively should be considered "external". This PR moves the peer
stream replication bidirectional RPC endpoint to the external gRPC
server and ensures that things continue to function.
Require use of mesh gateways in order for service mesh data plane
traffic to flow between peers.
This also adds plumbing for envoy integration tests involving peers, and
one starter peering test.
* tidy code and add some doc strings
* add doc strings to tests
* add partitions tests, need to adapt to run in both oss and ent
* split oss and enterprise versions
* remove parallel tests
* add error
* fix queryBackend in test
* revert unneeded change
* fix failing tests
* add a sample
* Consul cluster test
* add build dockerfile
* add tests to cover mixed versions tests
* use flag to pass docker image name
* remove default config and rely on flags to inject the right image to test
* add cluster abstraction
* fix imports and remove old files
* fix imports and remove old files
* fix dockerIgnore
* make a `Node interface` and encapsulate ConsulContainer
* fix a test bug where we only check the leader against a single node.
* add upgrade tests to CI
* fix yaml alignment
* fix alignment take 2
* fix flag naming
* fix image to build
* fix test run and go mod tidy
* add a debug command
* run without RYUK
* fix parallel run
* add skip reaper code
* make tempdir in local dir
* chmod the temp dir to 0777
* chmod the right dir name
* change executor to use machine instead of docker
* add docker layer caching
* remove setup docker
* add gotestsum
* install go version
* use variable for GO installed version
* add environment
* add environment in the right place
* do not disable RYUK in CI
* add service check to tests
* assertions outside routines
* add queryBackend to the api query meta.
* check if we are using the right backend for those tests (streaming)
* change the tested endpoint to use one that have streaming.
* refactor to test multiple scenarios for streaming
* Fix dockerfile
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
* rename Clients to clients
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
* check if cluster have 0 node
* tidy code and add some doc strings
* use uuid instead of random string
* add doc strings to tests
* add queryBackend to the api query meta.
* add a changelog
* fix for api backend query
* add missing require
* fix q.QueryBackend
* Revert "fix q.QueryBackend"
This reverts commit cd0e5f7b1a1730e191673d624f8e89b591871c05.
* fix circle ci config
* tidy go mod after merging main
* rename package and fix test scenario
* update go download url
* address review comments
* rename flag in CI
* add readme to the upgrade tests
* fix golang download url
* fix golang arch downloaded
* fix AddNodes to handle an empty cluster case
* use `parseBool`
* rename circle job and add comment
* update testcontainer to 0.13
* fix circle ci config
* remove build docker file and use `make dev-docker` instead
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* fix a typo
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
* Add partition fields to targets like service route destinations
* Update validation to prevent cross-DC + cross-partition references
* Handle partitions when reading config entries for disco chain
* Encode partition in compiled targets
The secondary DC now takes longer to populate the MGW snapshot because
it needs to wait for the secondary CA to be initialized before it can
receive roots and generate xDS config.
Previously MGWs could receive empty roots before the CA was
initialized. This wasn't necessarily a problem since the cluster ID in
the trust domain isn't verified.
We launch one container as part of the test with --pid=host but
apparently within that container it launches a copy of "tini" as a
process supervisor that prefers to be PID 1.
Because it's not PID 1 it logs a warning message about this to the envoy
integration test logs that can lead to thinking somehow that a test
failure is related when in fact it's completely unrelated.
Adding this environment variable avoids the warning.
The only thing that needed fixing up pertained to this section of the 1.18.x release notes:
> grpc_stats: the default value for stats_for_all_methods is switched from true to false, in order to avoid possible memory exhaustion due to an untrusted downstream sending a large number of unique method names. The previous default value was deprecated in version 1.14.0. This only changes the behavior when the value is not set. The previous behavior can be used by setting the value to true. This behavior change by be overridden by setting runtime feature envoy.deprecated_features.grpc_stats_filter_enable_stats_for_all_methods_by_default.
For now to maintain status-quo I'm explicitly setting `stats_for_all_methods=true` in all versions to avoid relying upon the default.
Additionally the naming of the emitted metrics for these gRPC requests changed slightly so the integration test assertions for `case-grpc` needed adjusting.
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.
Union of all commit messages follows to give an overarching summary:
xds: exclusively support incremental xDS when using xDS v3
Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support
Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit
xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings
In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.
This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.
xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
Note that this does NOT upgrade to xDS v3. That will come in a future PR.
Additionally:
- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.
Fixes#8425
To fix failing integration tests. The latest version (`1.7.4.0-r0`)
appears to not be catting all the bytes, so the expected metrics are
missing in the output.
This PR updates the tags that we generate for Envoy stats.
Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
This has the biggest impact on enterprise test cases that use namespaced
registrations, which prior to this change sometimes failed the initial
registration because the namespace was not yet created.
Added a new option `ui_config.metrics_proxy.path_allowlist`. This defaults to `["/api/v1/query", "/api/v1/query_range"]` when the metrics provider is set to `prometheus`.
Requests that do not use one of the allow-listed paths (via exact match) get a 403 Forbidden response instead.
The key thing here is to use `curl --no-keepalive` so that envoy
pre-1.15 tests will reliably use the latest listener every time.
Extra:
- Switched away from editing line-item intentions the legacy way.
- Removed some teardown scripts, as we don't share anything between cases anyway
- Removed unnecessary use of `run` in some places.
There is a delay between an intentions change being made, and it being
reflected in the Envoy runtime configuration. Now that the enforcement
happens inside of Envoy instead of over in the agent, our tests need to
explicitly wait until the xDS reconfiguration is complete before
attempting to assert intentions worked.
Also remove a few double retry loops.
This speeds up individual envoy integration test runs from ~23m to ~14m.
It's also a pre-req for possibly switching to doing the tests entirely within Go (no shell-outs).
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
Melisa Griffin
Andrew Stucki
Anita Akaeze
Nick Irvine
sarahalsmiller
Mike Morris
cskh
Semir Patel
Eric Haberkorn
Derek Menteer
wangxinyi7
Dan Stough
Nitya Dhanushkodi
Thomas Eckert
malizz
Dan Upton
R.B. Boyer
John Murret
Matt Keeler
Kyle Schochenmaier
Freddy
Chris S. Kim
Derek Menteer
freddygv
Alex Oskotsky
Luke Kysow
Evan Culver
Chris Thain
Dhia Ayachi
Evan Culver
Paul Banks
Kyle Havlovitz
Matt Keeler
Daniel Nephin
Yong Wen Chua
R.B. Boyer
Alvin Huang
Michele Degges