The LogOutput io.Writer used by TestAgent must allow concurrent reads and writes, and a
bytes.Buffer does not allow this. The bytes.Buffer must be wrapped with a lock to make this safe.
Add a skip condition to all tests slower than 100ms.
This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests
With this change:
```
$ time go test -count=1 -short ./agent
ok github.com/hashicorp/consul/agent 0.743s
real 0m4.791s
$ time go test -count=1 -short ./agent/consul
ok github.com/hashicorp/consul/agent/consul 4.229s
real 0m8.769s
```
Header is: X-Consul-Default-ACL-Policy=<allow|deny>
This is of particular utility when fetching matching intentions, as the
fallthrough for a request that doesn't match any intentions is to
enforce using the default acl policy.
https server.
In #8234 I changed a few tests to use TestAgent.HTTPAddr() to find the
addr used in the test. Due to the way HTTPAddr() was implemented these
tests were passing, but I think the pass was incidental. HTTPAddr() was
not matching any servers, and was instead returning the last server,
which happened to be the one these tests wanted.
This commit fixes the implementation of HTTPAddr to panic if no match
was found. The tests which require an HTTPS server are changed to use
a new firstAddr() to look up the correct address.
While working on another change I caused a bunch of these tests to fail.
Unfortunately the failure messages were not super helpful at first.
One problem was that the request and response were created outside of
the retry. This meant that when the second attempt happened, the request
body was empty (because the buffer had been consumed), and so the
request was not actually being retried. This was fixed by moving more of
the request creation into the retry block.
Another problem was that these functions can return errors in two ways, and
are not consistent about which way they use. Some errors are returned to
the response writer, but the tests were not checking those errors, which
was causing a panic later on. This was fixed by adding a check for the
response code.
Also adds some missing t.Helper(), and has assertIndex use checkIndex so
that it is clear these are the same implementation.
The embedded HTTPServer struct is not used by the large HTTPServer
struct. It is used by tests and the agent. This change is a small first
step in the process of removing that field.
The eventual goal is to reduce the scope of HTTPServer making it easier
to test, and split into separate packages.
There are a couple of things in here.
First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism.
This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.
Some of these problems are minor (unused vars), but others are real bugs (ignored errors).
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
This function now only starts the agent.
Using:
git grep -l 'StartTestAgent(t, true,' | \
xargs sed -i -e 's/StartTestAgent(t, true,/StartTestAgent(t,/g'
This should cut down on test flakiness.
Problems handled:
- If you had enough parallel test cases running, the former circular
approach to handling the port block could hand out the same port to
multiple cases before they each had a chance to bind them, leading to
one of the two tests to fail.
- The freeport library would allocate out of the ephemeral port range.
This has been corrected for Linux (which should cover CI).
- The library now waits until a formerly-in-use port is verified to be
free before putting it back into circulation.
* First conversion
* Use serf 0.8.2 tag and associated updated deps
* * Move freeport and testutil into internal/
* Make internal/ its own module
* Update imports
* Add replace statements so API and normal Consul code are
self-referencing for ease of development
* Adapt to newer goe/values
* Bump to new cleanhttp
* Fix ban nonprintable chars test
* Update lock bad args test
The error message when the duration cannot be parsed changed in Go 1.12
(ae0c435877d3aacb9af5e706c40f9dddde5d3e67). This updates that test.
* Update another test as well
* Bump travis
* Bump circleci
* Bump go-discover and godo to get rid of launchpad dep
* Bump dockerfile go version
* fix tar command
* Bump go-cleanhttp
This PR adds two features which will be useful for operators when ACLs are in use.
1. Tokens set in configuration files are now reloadable.
2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload)
Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change.
Some other secondary changes:
* Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly.
* Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid.
* Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents.
* Docs updated to reflect the API additions and to show using the new endpoints.
* Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
This way we can avoid unnecessary panics which cause other tests not to run.
This doesn't remove all the possibilities for panics causing other tests not to run, it just fixes the TestAgent
* agent/debug: add package for debugging, host info
* api: add v1/agent/host endpoint
* agent: add v1/agent/host endpoint
* command/debug: implementation of static capture
* command/debug: tests and only configured targets
* agent/debug: add basic test for host metrics
* command/debug: add methods for dynamic data capture
* api: add debug/pprof endpoints
* command/debug: add pprof
* command/debug: timing, wg, logs to disk
* vendor: add gopsutil/disk
* command/debug: add a usage section
* website: add docs for consul debug
* agent/host: require operator:read
* api/host: improve docs and no retry timing
* command/debug: fail on extra arguments
* command/debug: fixup file permissions to 0644
* command/debug: remove server flags
* command/debug: improve clarity of usage section
* api/debug: add Trace for profiling, fix profile
* command/debug: capture profile and trace at the same time
* command/debug: add index document
* command/debug: use "clusters" in place of members
* command/debug: remove address in output
* command/debug: improve comment on metrics sleep
* command/debug: clarify usage
* agent: always register pprof handlers and protect
This will allow us to avoid a restart of a target agent
for profiling by always registering the pprof handlers.
Given this is a potentially sensitive path, it is protected
with an operator:read ACL and enable debug being
set to true on the target agent. enable_debug still requires
a restart.
If ACLs are disabled, enable_debug is sufficient.
* command/debug: use trace.out instead of .prof
More in line with golang docs.
* agent: fix comment wording
* agent: wrap table driven tests in t.run()
* Add cache types for catalog/services and health/services and basic test that caching works
* Support non-blocking cache types with Cache-Control semantics.
* Update API docs to include caching info for every endpoint.
* Comment updates per PR feedback.
* Add note on caching to the 10,000 foot view on the architecture page to make the new data path more clear.
* Document prepared query staleness quirk and force all background requests to AllowStale so we can spread service discovery load across servers.
Fixes: #4441
This fixes the issue with Connect Managed Proxies + ACLs being broken.
The underlying problem was that the token parsed for most http endpoints was sent untouched to the servers via the RPC request. These changes make it so that at the HTTP endpoint when parsing the token we additionally attempt to convert potential proxy tokens into regular tokens before sending to the RPC endpoint. Proxy tokens are only valid on the agent with the managed proxy so the resolution has to happen before it gets forwarded anywhere.
- register endpoints with supported methods
- support OPTIONS requests, indicating supported methods
- extract method validation (error 405) from individual endpoints
- on 405 where multiple methods are allowed, create a single Allow
header with comma-separated values, not multiple Allow headers.
* Refactors the HTTP listen path to create servers in the same spot.
* Adds HTTP/2 support to Consul's HTTPS server.
* Vendors Go HTTP/2 library and associated deps.
littlestar642
Dan Upton
Daniel Nephin
R.B. Boyer
Paul Banks
Matt Keeler
Hans Hasselberg
John Cowen
Chris Piraino
Sarah Adams
Mike Morris
Jeff Mitchell
Matt Keeler
Aestek
Jack Pearkes
Miroslav Bagljas
Preetha
Edd Steel
James Phillips