Add case insensitive param on service route match
This commit adds in a new feature that allows service routers to specify that
paths and path prefixes should ignore upper / lower casing when matching URLs.
Co-authored-by: Derek Menteer <105233703+hashi-derek@users.noreply.github.com>
Ultimately we will have to rectify wan federation with v2 catalog adjacent
experiments, but for now blanket prevent usage of the resource-apis,
v2dns, and v2tenancy experiments in secondary datacenters.
* Create HCP management token in HCP manager
* Change InitializeManagementToken to ManagementTokenUpserter
* Implement and use management token upsert function
* Fix race condition in test
* Add idea for improvement as comment
* Return early in upsertManagementToken if token exists
* Add Initializer to the controller
The Initializer adds support for running any required initialization
steps when the controller is first started.
* Implement HCP Link initializer
The link initializer will create a Link resource if the
cloud configuration has been set.
* Simplify retry logic and testing
* Remove internal retry, replace with logging logic
This add a fix to properly verify the gateway mode before creating a watch specific to mesh gateways. This watch have a high performance cost and when mesh gateways are not used is not used.
This also adds an optimization to only return the nodes when watching the Internal.ServiceDump RPC to avoid unnecessary disco chain compilation. As watches in proxy config only need the nodes.
* Option to set HCP client at runtime
Allows us to initially set a nil HCP client for the
telemetry provider and update it later.
* Set telemetry provider HCP client in HCP manager
Set the telemetry provider as a dependency and pass it to
the manager. Update the telemetry provider's HCP client
when the HCP manager starts.
* Add a provider interface for the metrics client
This provider will allow us to configure and reconfigure the
retryable HTTP client and the headers for the metrics client.
* Move HTTP retryable client to separate file
Copied directly from the metrics client.
* Abstract HCP specific values in HTTP client
Remove HCP specific references and instead initiate with
a generic TLS configuration and authentication source.
* Set up HTTP client and headers in the provider
Move setup from the metrics client to the HCP telemetry
provider.
* Update the telemetry provider in the HCP manager
Initialize the provider without the HCP configs and then update
it in the HCP manager to enable it.
* Improve test assertion, fix method comment
* Move client provider to metrics client
* Stop the manager on setup error
* Add separate lock for http configuration
* Start telemetry provider in HCP manager
* Update HCP client and config as part of Run
* Remove option to set config at initialization
* Simplify and clean up setting HCP configs
* Add test for telemetry provider Run method
* Fix race condition
* Use clone of HTTP headers
* Only allow initial update and run once
* Increase timeouts for flakey peering test.
* Various test fixes.
* Fix race condition in reconcilePeering.
This resolves an issue where a peering object in the state store was
incorrectly mutated by a function, resulting in the test being flagged as
failing when the -race flag was used.
To fix an issue displaying the current reloaded config in the
v1/agent/self endpoint #18681 caused the agent's internal
config struct member to be deepcopied and replaced on reload.
This is not safe because the field is not protected by a lock, nor
should it be due to how it is accessed by the rest of the system.
This PR does the same deepcopy, but into a new field solely for
the point of capturing the current reloaded values for display
purposes. If there has been no reload then the original config is used.
* Implement In-Process gRPC for use by controller caching/indexing
This replaces the pipe base listener implementation we were previously using. The new style CAN avoid cloning resources which our controller caching/indexing is taking advantage of to not duplicate resource objects in memory.
To maintain safety for controllers and for them to be able to modify data they get back from the cache and the resource service, the client they are presented in their runtime will be wrapped with an autogenerated client which clones request and response messages as they pass through the client.
Another sizable change in this PR is to consolidate how server specific gRPC services get registered and managed. Before this was in a bunch of different methods and it was difficult to track down how gRPC services were registered. Now its all in one place.
* Fix race in tests
* Ensure the resource service is registered to the multiplexed handler for forwarding from client agents
* Expose peer streaming on the internal handler
* Add HCCLink resource type
* Register HCCLink resource type with basic validation
* Add validation for required fields
* Add test for default ACLs
* Add no-op controller for HCCLink
* Add resource-apis semantic validation check in hcclink controller
* Add copyright headers
* Rename HCCLink to Link
* Add hcp_cluster_url to link proto
* Update 'disabled' reason with more detail
* Update link status name to consul.io/hcp/link
* Change link version from v1 to v2
* Use feature flag/experiment to enable v2 resources with HCP
* Update SCADA provider version
Also update mocks for SCADA provider.
* Create SCADA provider w/o HCP config, then update
Adds a placeholder config option to allow us to initialize a SCADA provider
without the HCP configuration. Also adds an update method to then add the
HCP configuration. We need this to be able to eventually always register a
SCADA listener at startup before the HCP config values are known.
* Pass cloud configuration to HCP manager
Save the entire cloud configuration and pass it to the HCP
manager.
* Update and start SCADA provider in HCP manager
Move config updating and starting to the HCP manager. The HCP manager
will eventually be responsible for all processes that contribute
to linking to HCP.
* NET-6945 - Replace usage of deprecated Envoy field envoy.config.core.v3.HeaderValueOption.append
* update proto for v2 and then update xds v2 logic
* add changelog
* Update 20078.txt to be consistent with existing changelog entries
* swap enum values tomatch envoy.
* NET-6946 - Replace usage of deprecated Envoy field envoy.config.route.v3.HeaderMatcher.safe_regex_match
* removing unrelated changes
* update golden files
* do not set engine type
* NET-6426 Create ProxyStateTemplate when reconciling MeshGateway resource
* Add TODO for switching fetch method based on gateway type
* Use gateway-kind in workload metadata instead of owner reference
* Create ProxyStateTemplate builder for gatewayproxy controller
* Update to use new controller interface
* Add copyright headers
* Set correct name for ProxyStateTemplate identity reference
* Generate empty ProxyStateTemplate by fetching MeshGateway
This cheats and looks up the MeshGateway directly. In the future, we will need a Workload => xGateway mapper
* Specify owner reference when writing ProxyStateTemplate
* Update dependency mapper to account for multiple controllers per resource type
* Regenerate v2 resource dependencies map
* Add helpful trace logs, tag TODOs with ticket identifiers
This commit fixes an issue where the partition was not properly set
on the peering query failover target created from sameness-groups.
Before this change, it was always empty, meaning that the data
would be queried with respect to the default partition always. This
resulted in a situation where a PQ that was attempting to use a
sameness-group for failover would select peers from the default
partition, rather than the partition of the sameness-group itself.
* add a hash to config entries when normalizing
* add GetHash and implement comparing hashes
* only update if the Hash is different
* only update if the Hash is different and not 0
* fix proto to include the Hash
* fix proto gen
* buf format
* add SetHash and fix tests
* fix config load tests
* fix state test and config test
* recalculate hash when restoring config entries
* fix snapshot restore test
* add changelog
* fix missing normalize, fix proto indexes and add normalize test
When a large number of upstreams are configured on a single envoy
proxy, there was a chance that it would timeout when waiting for
ClusterLoadAssignments. While this doesn't always immediately cause
issues, consul-dataplane instances appear to consistently drop
endpoints from their configurations after an xDS connection is
re-established (the server dies, random disconnect, etc).
This commit adds an `xds_fetch_timeout_ms` config to service registrations
so that users can set the value higher for large instances that have
many upstreams. The timeout can be disabled by setting a value of `0`.
This configuration was introduced to reduce the risk of causing a
breaking change for users if there is ever a scenario where endpoints
would never be received. Rather than just always blocking indefinitely
or for a significantly longer period of time, this config will affect
only the service instance associated with it.
This fixes the following race condition:
- Send update endpoints
- Send update cluster
- Recv ACK endpoints
- Recv ACK cluster
Prior to this fix, it would have resulted in the endpoints NOT existing in
Envoy. This occurred because the cluster update implicitly clears the endpoints
in Envoy, but we would never re-send the endpoint data to compensate for the
loss, because we would incorrectly ACK the invalid old endpoint hash. Since the
endpoint's hash did not actually change, they would not be resent.
The fix for this is to effectively clear out the invalid pending ACKs for child
resources whenever the parent changes. This ensures that we do not store the
child's hash as accepted when the race occurs.
An escape-hatch environment variable `XDS_PROTOCOL_LEGACY_CHILD_RESEND` was
added so that users can revert back to the old legacy behavior in the event
that this produces unknown side-effects. Visit the following thread for some
extra context on why certainty around these race conditions is difficult:
https://github.com/envoyproxy/envoy/issues/13009
This bug report and fix was mostly implemented by @ksmiley with some minor
tweaks.
Co-authored-by: Keith Smiley <ksmiley@salesforce.com>
* Add CE version of gateway-upstream-disambiguation
* Use NamespaceOrDefault and PartitionOrDefault
* Add Changelog entry
* Remove the unneeded reassignment
* Use c.ID()
The client.rpc metric now excludes internal retries for consistency
with client.rpc.exceeded and client.rpc.failed. All of these metrics
now increment at most once per RPC method call, allowing for
accurate calculation of failure / rate limit application occurrence.
Additionally, if an RPC fails because no servers are present,
client.rpc.failed is now incremented.
* Add a make target to run lint-consul-retry on all the modules
* Cleanup sdk/testutil/retry
* Fix a bunch of retry.Run* usage to not use the outer testing.T
* Fix some more recent retry lint issues and pin to v1.4.0 of lint-consul-retry
* Fix codegen copywrite lint issues
* Don’t perform cleanup after each retry attempt by default.
* Use the common testutil.TestingTB interface in test-integ/tenancy
* Fix retry tests
* Update otel access logging extension test to perform requests within the retry block
* Upgrade hcp-sdk-go to latest version v0.73
Changes:
- go get github.com/hashicorp/hcp-sdk-go
- go mod tidy
* From upgrade: regenerate protobufs for upgrade from 1.30 to 1.31
Ran: `make proto`
Slack: https://hashicorp.slack.com/archives/C0253EQ5B40/p1701105418579429
* From upgrade: fix mock interface implementation
After upgrading, there is the following compile error:
cannot use &mockHCPCfg{} (value of type *mockHCPCfg) as "github.com/hashicorp/hcp-sdk-go/config".HCPConfig value in return statement: *mockHCPCfg does not implement "github.com/hashicorp/hcp-sdk-go/config".HCPConfig (missing method Logout)
Solution: update the mock to have the missing Logout method
* From upgrade: Lint: remove usage of deprecated req.ServerState.TLS
Due to upgrade, linting is erroring due to usage of a newly deprecated field
22:47:56 [consul]: make lint
--> Running golangci-lint (.)
agent/hcp/testing.go:157:24: SA1019: req.ServerState.TLS is deprecated: use server_tls.internal_rpc instead. (staticcheck)
time.Until(time.Time(req.ServerState.TLS.CertExpiry)).Hours()/24,
^
* From upgrade: adjust oidc error message
From the upgrade, this test started failing:
=== FAIL: internal/go-sso/oidcauth TestOIDC_ClaimsFromAuthCode/failed_code_exchange (re-run 2) (0.01s)
oidc_test.go:393: unexpected error: Provider login failed: Error exchanging oidc code: oauth2: "invalid_grant" "unexpected auth code"
Prior to the upgrade, the error returned was:
```
Provider login failed: Error exchanging oidc code: oauth2: cannot fetch token: 401 Unauthorized\nResponse: {\"error\":\"invalid_grant\",\"error_description\":\"unexpected auth code\"}\n
```
Now the error returned is as below and does not contain "cannot fetch token"
```
Provider login failed: Error exchanging oidc code: oauth2: "invalid_grant" "unexpected auth code"
```
* Update AgentPushServerState structs with new fields
HCP-side changes for the new fields are in:
https://github.com/hashicorp/cloud-global-network-manager-service/pull/1195/files
* Minor refactor for hcpServerStatus to abstract tlsInfo into struct
This will make it easier to set the same tls-info information to both
- status.TLS (deprecated field)
- status.ServerTLSMetadata (new field to use instead)
* Update hcpServerStatus to parse out information for new fields
Changes:
- Improve error message and handling (encountered some issues and was confused)
- Set new field TLSInfo.CertIssuer
- Collect certificate authority metadata and set on TLSInfo.CertificateAuthorities
- Set TLSInfo on both server.TLS and server.ServerTLSMetadata.InternalRPC
* Update serverStatusToHCP to convert new fields to GNM rpc
* Add changelog
* Feedback: connect.ParseCert, caCerts
* Feedback: refactor and unit test server status
* Feedback: test to use expected struct
* Feedback: certificate with intermediate
* Feedback: catch no leaf, remove expectedErr
* Feedback: update todos with jira ticket
* Feedback: mock tlsConfigurator
* Update catalog and ui endpoints to show APIGateway in gateway service
topology view
* Added initial implementation for service view
* updated ui
* Fix topology view for gateways
* Adding tests for gw controller
* remove unused args
* Undo formatting changes
* Fix call sites for upstream/downstream gw changes
* Add config entry tests
* Fix function calls again
* Move from ServiceKey to ServiceName, cleanup from PR review
* Add additional check for length of services in bound apigateway for
IsSame comparison
* fix formatting for proto
* gofmt
* Add DeepCopy for retrieved BoundAPIGateway
* gofmt
* gofmt
* Rename function to be more consistent
* Add meshconfiguration/controller
* Add MeshConfiguration Registration function
* Fix the TODOs on the RegisterMeshGateway function
* Call RegisterMeshConfiguration
* Add comment to MeshConfigurationRegistration
* Add a test for Reconcile and some comments
* [NET-6438] Add tenancy to xDS Tests
* [NET-6438] Add tenancy to xDS Tests
- Fixing imports
* [NET-6438] Add tenancy to xDS Tests
- Added cleanup post test run
* [NET-6356] Add tenancy to xDS Tests
- Added cleanup post test run
* [NET-6438] Add tenancy to xDS Tests
- using t.Cleanup instead of defer delete
* [NET-6438] Add tenancy to xDS Tests
- rebased
* [NET-6438] Add tenancy to xDS Tests
- rebased
* Generate resource_types for MeshGateway by specifying spec option
* Register MeshGateway type w/ TODOs for hooks
* Initialize controller for MeshGateway resources
* Add meshgateway to list of v2 resource dependencies for golden test
* Scope MeshGateway resource to partition
* migrate expose checks and paths tests to resources_test.go
* fix failing expose paths tests
* fix the way endpoint resources get created to make expose tests pass.
* remove endpoint resources that are already inlined on local_app clusters
* renaiming and comments
* migrate remaining service mesh tests to resources_test.go
* cleanup
* update proxystateconverter to skip ading alpn to clusters and listener filterto match v1 behavior
* [NET-6356] Add tenancy to Failover Tests
* [NET-6438] Add tenancy to xDS Tests
- Added cleanup post test run
* [NET-6356] Add tenancy to failover Tests
- using t.Cleanup instead of defer delete
* migrate expose checks and paths tests to resources_test.go
* fix failing expose paths tests
* fix the way endpoint resources get created to make expose tests pass.
* wip
* remove endpoint resources that are already inlined on local_app clusters
* renaiming and comments
* cover all protocols in local_app golden tests
* fix xds tests
* updating latest
* fix broken test
* add sorting of routers to TestBuildLocalApp to get rid of the flaking
* cover all protocols in local_app golden tests
* cover all protocols in local_app golden tests
* cover all protocols in local_app golden tests
* process envoy resource by walking the map. use a map rather than array for envoy resource to prevent duplication.
* cleanup. doc strings.
* update to latest
* fix broken test
* update tests after adding sorting of routers in local_app builder tests
* do not make endpoints for local_app
* fix catalog destinations only by creating clusters for any cluster not already created by walking the graph.
* Configure TestAllResourcesFromSnapshot to run V2 tests
* wip
* fix processing of failover groups
* add endpoints and clusters for any clusters that were not created from walking the listener -> path
* fix xds v2 golden files for clusters to include failover group clusters
Fix issue with wanfed lan ip conflicts.
Prior to this commit, the connection pools were unaware which datacenter the
connection was associated with. This meant that any time servers with
overlapping LAN IP addresses and node shortnames existed, they would be
incorrectly co-located in the same pool. Whenever this occurred, the servers
would get stuck in an infinite loop of forwarding RPCs to themselves (rather
than the intended remote DC) until they eventually run out of memory.
Most notably, this issue can occur whenever wan federation through mesh
gateways is enabled.
This fix adds extra metadata to specify which DC the connection is associated
with in the pool.
* fix: update watch endpoint to default based on scope
* test: additional test
* refactor: rename list validate function
* refactor: rename validate<Op>Request() -> ensure<Op>RequestValid() for consistency
* cover all protocols in local_app golden tests
* fix xds tests
* updating latest
* fix broken test
* add sorting of routers to TestBuildLocalApp to get rid of the flaking
* init
* computed exported service
* make proto
* exported services resource
* exported services test
* added some tests and namespace exported service
* partition exported services
* computed service
* computed services tests
* register types
* fix comment
* make proto lint
* fix proto format make proto
* make codegen
* Update proto-public/pbmulticluster/v1alpha1/computed_exported_services.proto
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
* Update internal/multicluster/internal/types/computed_exported_services.go
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
* using different way of resource creation in tests
* make proto
* fix computed exported services test
* fix tests
* differnet validation for computed services for ent and ce
* Acls for exported services
* added validations for enterprise features in ce
* fix error
* fix acls test
* Update internal/multicluster/internal/types/validation_exported_services_ee.go
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
* removed the create method
* update proto
* removed namespace
* created seperate function for ce and ent
* test files updated and validations fixed
* added nil checks
* fix tests
* added comments
* removed tenancy check
* added mutation function
* fix mutation method
* fix list permissions in test
* fix pr comments
* fix tests
* lisence
* busl license
* Update internal/multicluster/internal/types/helpers_ce.go
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
* Update internal/multicluster/internal/types/helpers_ce.go
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
* Update internal/multicluster/internal/types/helpers_ce.go
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
* make proto
* some pr comments addressed
* some pr comments addressed
* acls helper
* some comment changes
* removed unused files
* fixes
* fix function in file
* caps
* some positioing
* added test for validation error
* fix names
* made valid a function
* remvoed patch
* removed mutations
* v2 beta1
* v2beta1
* rmeoved v1alpha1
* validate error
* merge ent
* some nits
* removed dup func
* removed nil check
---------
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
* xds: Ensure v2 route match is populated for gRPC
Similar to HTTP, ensure that route match config (which is required by
Envoy) is populated when default values are used.
Because the default matches generated for gRPC contain a single empty
`GRPCRouteMatch`, and that proto does not directly support prefix-based
config, an interpretation of the empty struct is needed to generate the
same output that the `HTTPRouteMatch` is explicitly configured to
provide in internal/mesh/internal/controllers/routes/generate.go.
* xds: Ensure protocol set for gRPC resources
Add explicit protocol in `ProxyStateTemplate` builders and validate it
is always set on clusters. This ensures that HTTP filters and
`http2_protocol_options` are populated in all the necessary places for
gRPC traffic and prevents future unintended omissions of non-TCP
protocols.
Co-authored-by: John Murret <john.murret@hashicorp.com>
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* NET-5397 - wire up golden tests from sidecar-proxy controller for xds controller and xdsv2
* WIP
* WIP
* everything matching except leafCerts. need to mock those
* single port destinations working except mixed destinations
* golden test input to xds controller tests for destinations
* proposed fix for failover group naming errors
* clean up test to use helper.
* clean up test to use helper.
* fix test file
* add docstring for test function.
* add docstring for test function.
* fix linting error
* fixing test after route fix merged into main
* first source test works
* WIP
* modify all source files
* source tests pass
* fixing tests after bug fix in main
* got first destination working.
* adding destinations
* fix docstring for test
* fixing tests after bug fix in main
* adding source proxies
* fixing tests after bug fix in main
* got first destination working.
* adding destinations
* fix docstring for test
* fixing tests after bug fix in main
* got first destination working.
* adding destinations
* fix docstring for test
* fixing tests after bug fix in main
* NET-5397 - wire up golden tests from sidecar-proxy controller for xds controller and xdsv2
* WIP
* WIP
* everything matching except leafCerts. need to mock those
* single port destinations working except mixed destinations
* golden test input to xds controller tests for destinations
* proposed fix for failover group naming errors
* clean up test to use helper.
* clean up test to use helper.
* fix test file
* add docstring for test function.
* add docstring for test function.
* fix linting error
* fixing test after route fix merged into main
* first source test works
* WIP
* modify all source files
* source tests pass
* fixing tests after bug fix in main
* got first destination working.
* adding destinations
* fix docstring for test
* fixing tests after bug fix in main
Prior to the introduction of this configuration, grpc keepalive messages were
sent after 2 hours of inactivity on the stream. This posed issues in various
scenarios where the server-side xds connection balancing was unaware that envoy
instances were uncleanly killed / force-closed, since the connections would
only be cleaned up after ~5 minutes of TCP timeouts occurred. Setting this
config to a 30 second interval with a 20 second timeout ensures that at most,
it should take up to 50 seconds for a dead xds connection to be closed.
Ensure LB policy set for locality-aware routing (CE)
`overprovisioningFactor` should be overridden with the expected value
(100,000) when there are multiple endpoint groups. Update code and
tests to enforce this.
This is an Enterprise feature. This commit represents the CE portions of
the change; tests are added in the corresponding `consul-enterprise`
change.
This change adds ACL hooks to the remaining catalog and mesh resources, excluding any computed ones. Those will for now continue using the default operator:x permissions.
It refactors a lot of the common testing functions so that they can be re-used between resources.
There are also some types that we don't yet support (e.g. virtual IPs) that this change adds ACL hooks to for future-proofing.
* xdsv2: support l7 by adding xfcc policy/headers, tweaking routes, and make a bunch of listeners l7 tests pass
* sidecarproxycontroller: add l7 local app support
* trafficpermissions: make l4 traffic permissions work on l7 workloads
* rename route name field for consistency with l4 cluster name field
* resolve conflicts and rebase
* fix: ensure route name is used in l7 destination route name as well. previously it was only in the route names themselves, now the route name and l7 destination route name line up
When the v2 catalog experiment is enabled the old v1 catalog apis will be
forcibly disabled at both the API (json) layer and the RPC (msgpack) layer.
This will also disable anti-entropy as it uses the v1 api.
This includes all of /v1/catalog/*, /v1/health/*, most of /v1/agent/*,
/v1/config/*, and most of /v1/internal/*.
This PR fixes an issue where upstreams did not correctly inherit the proper
namespace / partition from the parent service when attempting to fetch the
upstream protocol due to inconsistent normalization.
Some of the merge-service-configuration logic would normalize to default, while
some of the proxycfg logic would normalize to match the parent service. Due to
this mismatch in logic, an incorrect service-defaults configuration entry would
be fetched and have its protocol applied to the upstream.
* Add InboundPeerTrustBundle maps to Terminating Gateway
* Add notify and cancelation of watch for inbound peer trust bundles
* Pass peer trust bundles to the RBAC creation function
* Regenerate Golden Files
* add changelog, also adds another spot that needed peeredTrustBundles
* Add basic test for terminating gateway with peer trust bundle
* Add intention to cluster peered golden test
* rerun codegen
* update changelog
* really update the changelog
---------
Co-authored-by: Melisa Griffin <melisa.griffin@hashicorp.com>
Fix issues with empty sources
* Validate that each permission on traffic permissions resources has at least one source.
* Don't construct RBAC policies when there aren't any principals. This resulted in Envoy rejecting xDS updates with a validation error.
```
error=
| rpc error: code = Internal desc = Error adding/updating listener(s) public_listener: Proto constraint validation failed (RBACValidationError.Rules: embedded message failed validation | caused by RBACValidationError.Policies[consul-intentions-layer4-1]: embedded message failed validation | caused by PolicyValidationError.Principals: value must contain at least 1 item(s)): rules {
```
The ACLs.Read hook for a resource only allows for the identity of a
resource to be passed in for use in authz consideration. For some
resources we wish to allow for the current stored value to dictate how
to enforce the ACLs (such as reading a list of applicable services from
the payload and allowing service:read on any of them to control reading the enclosing resource).
This change update the interface to usually accept a *pbresource.ID,
but if the hook decides it needs more data it returns a sentinel error
and the resource service knows to defer the authz check until after
fetching the data from storage.
* dns token
fix whitespace for docs and comments
fix test cases
fix test cases
remove tabs in help text
Add changelog
Peering dns test
Peering dns test
Partial implementation of Peered DNS test
Swap to new topology lib
expose dns port for integration tests on client
remove partial test implementation
remove extra port exposure
remove changelog from the ent pr
Add dns token to set-agent-token switch
Add enterprise golden file
Use builtin/dns template in tests
Update ent dns policy
Update ent dns template test
remove local gen certs
fix templated policy specs
* add changelog
* go mod tidy
* add namespace proto and registration
* fix proto generation
* add missing copywrite headers
* fix proto linter errors
* fix exports and Type export
* add mutate hook and more validation
* add more validation rules and tests
* Apply suggestions from code review
Co-authored-by: Semir Patel <semir.patel@hashicorp.com>
* fix owner error and add test
* remove ACL for now
* add tests around space suffix prefix.
* only fait when ns and ap are default, add test for it
---------
Co-authored-by: Semir Patel <semir.patel@hashicorp.com>
Ensure that configuring a FailoverPolicy for a service that is reachable via a xRoute or a direct upstream causes an envoy aggregate cluster to be created for the original cluster name, but with separate clusters for each one of the possible destinations.
Adding coauthors who mobbed/paired at various points throughout last week.
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: John Murret <john.murret@hashicorp.com>
Co-authored-by: Michael Zalimeni <michael.zalimeni@hashicorp.com>
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: Michael Wilkerson <mwilkerson@hashicorp.com>
Lord-Y
Nick Cellino
Dan Stough
Semir Patel
R.B. Boyer
Melissa Kam
Matt Keeler
Dhia Ayachi
John Murret
Derek Menteer
loshz
Ganesh S
cskh
Nathan Coleman
Nitya Dhanushkodi
aahel
Ronald
Thomas Eckert
Jared Kirschner
lornasong
John Maguire
Poonam Jadhav
Mike Nomitch
Kumar Kavish
Ashesh Vidyut
Chris S. Kim
Michael Zalimeni
Andrew Stucki
Eric Haberkorn
Iryna Shustava
Chris Thain
sarahalsmiller
John Landa