In https://github.com/hashicorp/consul/pull/8065 we attempted to reduce
the amount of times that the UI requests the discovery chain endpoint
when connect is disabled on a datacenter.
Currently we can only tell if connect is disabled on a datacenter by
detecting a 500 error from a connect related endpoint.
In the above PR we mistakenly returned from a catch instead of
rethrowing the error, which meant that when a none 500 error was caught
the discovery chain data would be removed. Whilst at first glance this
doens't seem like a big problem due to the endpoint erroring, but we
also receive a 0 error when we abort endpoints during blocking queries.
This means that in certain cases we can remove cached data for the
discovery chain and then delay reloading it via a blocking query.
This PR replaces the return with a throw, which means that everything is
dealt with correctly via the blocking query error detection/logic.
We'd assumed that TTL check outputs shouldn't be shown as it seemed like
they never had outputs, but they can be submitted with notes, which are
then converted into the output.
This unhides the output for TTLs and treats them exactly the same as
other healthchecks.
* Update Consul Service List composite rows with Tooltips and description lists
* Update Consul Service Instance List composite rows with Tooltips and description lists
* Removed line height in reduced pill to match the description lists in the composite rows
* Add all the new data required for NodeIdentities
* Add potential NodeIdentity to the token list component
* Amend the policy-form/selector to allow node identity creation
* Fix up CSS for radio buttons and select label
* Add node-identity policy template component
* Fix up and add acceptance tests for NodeIndentities
* Make sure policy previews take node identities into account
* Only show certain policy markup if those we have those policies
* Potentially temporarily hide dt's that don't have icons yet
This mixin was a very thin mixin over the top of our listeners utility,
and we have been gradually preferring using the utility straight rather
than using the mixin. This commit removes the last places where we still
used the mixin, and also potentially the last few places where we
continued to use the old API for our listeners utility.
The WithEventSource mixin was responsible for catching EventSource
errors and cleaning up events sources then the user left a Controller.
As we are trying to avoid mixin usage, we moved this all to an
`EventSource` component, which can clean up when the component is
removed from the page, and also fires an onerror event.
Moving to a component firing an onerror event means we can also remove
all of our custom computed property work that we were using previously
to catch errors (thrown when a service etc. is removed)
* Add Health Checks and update Tooltips in Ingress Upstreams
* Update Tooltip in Proxy Info tab Upstreams
* Add Tooltips to Proxy Info tab Exposed Paths
* Add Health Checks with Tooltips to Service List page
This excludes any /components/**/pageobject.js files from our production
builds which means we can co-locate all of our component page objects
(and selectors) along with the components themselves.
* ui: Reduce discovery-chain log spam
Currently the only way that the UI can know whether connect is enabled
or not is whether we get 500 errors from certain endpoints.
One of these endpoints we already use, so aswell as recovering from a
500 error, we also remember that connect is disabled for the rest of the
page 'session' (so until the page is refreshed), and make no further
http requests to the endpoint for that specific datacenter.
This means that log spam is reduced to only 1 log per page refresh/dc
instead of 1 log per service navigation.
Longer term we'll need some way to dynamically discover whether connect
is enabled per datacenter without relying on something that will add
error logs to consul.
Found using staticcheck.
binary.Write does not accept int types without a size. The error from binary.Write was ignored, so we never saw this error. Casting the data to uint64 produces a correct hash.
Also deprecate the Default{Addr,Port} fields, and prevent them from being encoded. These fields will always be empty and are not used.
Removing these would break backwards compatibility, so they are left in place for now.
Co-authored-by: Hans Hasselberg <me@hans.io>
* ui: Add ability to sort service based on health
* ui: Move custom sorting to sort/comparator Service/Helper (like search)
This moves custom sorting to use the same pattern as custom searching.
* Remove old Controller based comparator
* Remove gateway endpoint adapter, model, and serializer and tests
* Update service tests to handle gateway-services-nodes
* Upgrade consul-api-double to 2.15.2
* Add a fairly temporary shouldReconcile method
Co-authored-by: John Cowen <jcowen@hashicorp.com>
1. Removes all icons not supported by the backend
2. Adds other icons supported by the backend
3. If there is no icon available don't add CSS positioning for one
* ui: CSS and component changes to the <EmptyState /> component
* ui: Reset the auth-form component back to its initial state
Moving forwards we are going to have the auth-form on the page all the
time, even when logged in (for relogging in purposes). This means the
auth-form will not always be removed from the DOM when you log in.
This sets the form back to its idle state before calling onsubmit
* ui: Make a public api for modal-dialog with a single close method
* ui : Move cache reset somewhere that makes more sense, + single refresh
1. Centralize cache resetting elsewhere, for now the store makes most
sense, although I would prefer the Repository class, so using the store
is temporary
2. We only need to refresh on login once, unless we have a differing
nspace
* ui: Ensure visibilitychange events are cleaned up
* ui: Only cache DataSource data if we have any, + only clear the cache
* ui: Add the modal login dialog to both unauth and auth views
This means we can 'relogin' when already logged in
* ui: Add new empty states
* ui: CSS Tweaks
* Remove marketing grays
It seems that blink/webkit browsers at least will leak memory when using
input[type=password] inputs. This only affects us during testing as we
'refresh' the ember app ~1000 times without actually refreshing
the browser. This means references to these HTML input elements mount
up now that every single page/test has an input[password] on it.
Following this change our memory usage during testing seems to have
reduced by as much as 75%.
During normal usage the single password element is only added to the
page once per login/logout.
* ui: Move individual component types into a single %composite-list plus
1. Removes all out separate CSS components (that match HTML components)
to favour not having those separate for the moemnt at least
2. Reuses <ConsulServiceList /> component for Terminating Gateways >
Linked Services
* ui: Tweak breadcrumb spacing for '/' separator
* Fix up the tests i.e. services per tab so we can call them all services
* ui: Styling fixes (#7885)
* Move cellHeight to ListCollection js file
* Fix composite row border-top-color onHover state
* Add empty health check icon to CompositeRow styling
* ui: Slightly refactor %composite-rows and reuse ConsulServiceList component (#7886)
* ui: Move individual component types into a single %composite-list plus
1. Removes all out separate CSS components (that match HTML components)
to favour not having those separate for the moemnt at least
2. Reuses <ConsulServiceList /> component for Terminating Gateways >
Linked Services
* ui: Tweak breadcrumb spacing for '/' separator
* Fix up the tests i.e. services per tab so we can call them all services
* ui: Misc discovery chain fixes (#7892)
1. Look for a default splitter before looking for a default resolver in
order to route to.
2. Delay adding svg listeners until afterRender (fixes split tooltip)
3. Make router id's consistent for highlighting default routers in when
clicking the graph
* ui: If an error occurs on the server, surface it in the notification (#7893)
* ui: Delete old unused CSS (#7909)
This commit deletes CSS that we no longer use and we definitely will not
ever use.
We also dedup all of our imports here as it turns out SASS doesn't
dedupe imports. Strangely this increases out CSS weight by ~1kb instead
of reducing but we'd rather keep things deduped as that was the
intention
* ui: Redesign - Exposed Paths (#7912)
* Add new exposed paths icons to codebase
* Redesign Exposed Paths and create copy-button hover on Composite Row
* Refactor FeedbackDialog and CopyButton
* Change this.element to use `{{ref }}` now we don't have an element
We changed this to a tagless component with an eye to moving this to a
glimmer component, without spotting that this would also remove the
`this.element` property.
This adds an equivalent using the ref modifier.
Co-authored-by: John Cowen <jcowen@hashicorp.com>
* ui: Remove box-shadow and pointer cursor from metada list hover effect (#7914)
Co-authored-by: Kenia <19161242+kaxcode@users.noreply.github.com>
Originally we assumed all settings would be editable in the settings
page, but over time we've added thigns to localStorage that aren't user
settable settings. This means we shouldn't save all you localStorage
settings everything time only a single setting has been saved.
This change only changes the setting you've changed via the settings
page, meaning it will never update non-user-settable settings.
John Cowen
Kenia
Daniel Nephin
John Cowen