Commit Graph

24 Commits

Author SHA1 Message Date
R.B. Boyer 7983023acf
[backport/1.8.x] connect: use stronger validation that ingress gateways have compatible protocols defined for their upstreams (#8494)
Backport of #8470 to 1.8.x
2020-08-13 15:26:23 -05:00
R.B. Boyer 2142a697ad
[backport: 1.8.x] xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8265)
cherry-pick of #8222 onto origin/release/1.8.x

Fixes: #8205
2020-07-09 17:04:23 -05:00
R.B. Boyer 8a5680aaf0
connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8247)
cherry-pick of #8165 onto origin/release/1.8.x
2020-07-07 16:22:30 -05:00
Chris Piraino cbf143844f Append port number to ingress host domain (#8190)
A port can be sent in the Host header as defined in the HTTP RFC, so we
take any hosts that we want to match traffic to and also add another
host with the listener port added.

Also fix an issue with envoy integration tests not running the
case-ingress-gateway-tls test.
2020-07-07 15:43:32 +00:00
Chris Piraino 165a9af053 Always require Host header values for http services (#7990)
Previously, we did not require the 'service-name.*' host header value
when on a single http service was exposed. However, this allows a user
to get into a situation where, if they add another service to the
listener, suddenly the previous service's traffic might not be routed
correctly. Thus, we always require the Host header, even if there is
only 1 service.

Also, we add the make the default domain matching more restrictive by
matching "service-name.ingress.*" by default. This lines up better with
the namespace case and more accurately matches the Consul DNS value we
expect people to use in this case.
2020-06-08 18:16:48 +00:00
Chris Piraino d498a0afc9 Correctly set a namespace label in the required domain for xds routes
If an upstream is not in the default namespace, we expect DNS requests
to be served over "<service-name>.ingress.<namespace>.*"
2020-05-06 15:06:14 -05:00
Chris Piraino 45e635286a Re-add comment on connect-proxy virtual hosts 2020-05-06 15:06:14 -05:00
Chris Piraino f40833d094 Allow Hosts field to be set on an ingress config entry
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
2020-05-06 15:06:13 -05:00
Kyle Havlovitz 247f9eaf13 Allow ingress gateways to route traffic based on Host header
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.

To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.

- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
  route configuration when on an ingress gateway. This allows default
  services to easily use host header routing
- ingress-gateways have a single route config for each listener
  that utilizes domain matching to route to different services.
2020-05-06 15:06:13 -05:00
Kyle Havlovitz e7b1ee55de Add http routing support and integration test to ingress gateways 2020-04-24 09:31:32 -05:00
Daniel Nephin 1d90ecc31d Remove unused token parameter 2020-03-27 17:57:16 -04:00
Chris Piraino 47ff532735
Fixes envoy config when both RetryOn* values are set (#7280) 2020-02-18 09:25:47 -06:00
R.B. Boyer 561b2fe606
connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340) 2019-08-19 13:03:03 -05:00
R.B. Boyer c395affc93
connect: expose an API endpoint to compile the discovery chain (#6248)
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.

Also removed ability to configure the envoy OverprovisioningFactor.
2019-08-02 15:34:54 -05:00
R.B. Boyer f02924fafe
connect: simplify the compiled discovery chain data structures (#6242)
This should make them better for sending over RPC or the API.

Instead of a chain implemented explicitly like a linked list (nodes
holding pointers to other nodes) instead switch to a flat map of named
nodes with nodes linking other other nodes by name. The shipped
structure is just a map and a string to indicate which key to start
from.

Other changes:

* inline the compiler option InferDefaults as true

* introduce compiled target config to avoid needing to send back
  additional maps of Resolvers; future target-specific compiled state
  can go here

* move compiled MeshGateway out of the Resolver and into the
  TargetConfig where it makes more sense.
2019-08-01 22:44:05 -05:00
R.B. Boyer 6393edba53
connect: reconcile how upstream configuration works with discovery chains (#6225)
* connect: reconcile how upstream configuration works with discovery chains

The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:

- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.

- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).

- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).

- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).

- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).

If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.

Fixes #6159
2019-08-01 22:03:34 -05:00
R.B. Boyer ad9e7b6ae9
connect: allow L7 routers to match on http methods (#6164)
Fixes #6158
2019-07-23 20:56:39 -05:00
R.B. Boyer 85cf2706e6
connect: change router syntax for matching query parameters to resemble the syntax for matching paths and headers for consistency. (#6163)
This is a breaking change, but only in the context of the beta series.
2019-07-23 20:55:26 -05:00
R.B. Boyer 1dbd92e091
connect: validate and test more of the L7 config entries (#6156) 2019-07-23 20:50:23 -05:00
R.B. Boyer d7a5158805
xds: allow http match criteria to be applied to routes on services using grpc protocols (#6149) 2019-07-17 14:07:08 -05:00
R.B. Boyer bcd2de3a2e
implement some missing service-router features and add more xDS testing (#6065)
- also implement OnlyPassing filters for non-gateway clusters
2019-07-12 14:16:21 -05:00
Jack Pearkes e6f1b78efb Make cluster names SNI always (#6081)
* Make cluster names SNI always

* Update some tests

* Ensure we check for prepared query types

* Use sni for route cluster names

* Proper mesh gateway mode defaulting when the discovery chain is used

* Ignore service splits from PatchSliceOfMaps

* Update some xds golden files for proper test output

* Allow for grpc/http listeners/cluster configs with the disco chain

* Update stats expectation
2019-07-08 12:48:48 +01:00
R.B. Boyer 4bdb690a25
activate most discovery chain features in xDS for envoy (#6024) 2019-07-01 22:10:51 -05:00
Paul Banks 1909a95118 xDS Server Implementation (#4731)
* Vendor updates for gRPC and xDS server

* xDS server implementation for serving Envoy as a Connect proxy

* Address initial review comments

* consistent envoy package aliases; typos fixed; override TLS and authz for custom listeners

* Moar Typos

* Moar typos
2018-10-10 16:55:34 +01:00