Commit Graph

23 Commits

Author SHA1 Message Date
R.B. Boyer a155423f29 server: config entry replication now correctly uses namespaces in comparisons (#9024)
Previously config entries sharing a kind & name but in different
namespaces could occasionally cause "stuck states" in replication
because the namespace fields were ignored during the differential
comparison phase.

Example:

Two config entries written to the primary:

    kind=A,name=web,namespace=bar
    kind=A,name=web,namespace=foo

Under the covers these both get saved to memdb, so they are sorted by
all 3 components (kind,name,namespace) during natural iteration. This
means that before the replication code does it's own incomplete sort,
the underlying data IS sorted by namespace ascending (bar comes before
foo).

After one pass of replication the primary and secondary datacenters have
the same set of config entries present. If
"kind=A,name=web,namespace=bar" were to be deleted, then things get
weird. Before replication the two sides look like:

primary: [
    kind=A,name=web,namespace=foo
]
secondary: [
    kind=A,name=web,namespace=bar
    kind=A,name=web,namespace=foo
]

The differential comparison phase walks these two lists in sorted order
and first compares "kind=A,name=web,namespace=foo" vs
"kind=A,name=web,namespace=bar" and falsely determines they are the SAME
and are thus cause an update of "kind=A,name=web,namespace=foo". Then it
compares "<nothing>" with "kind=A,name=web,namespace=foo" and falsely
determines that the latter should be DELETED.

During reconciliation the deletes are processed before updates, and so
for a brief moment in the secondary "kind=A,name=web,namespace=foo" is
erroneously deleted and then immediately restored.

Unfortunately after this replication phase the final state is identical
to the initial state, so when it loops around again (rate limited) it
repeats the same set of operations indefinitely.
2020-10-23 18:42:45 +00:00
Daniel Nephin b11a615f0c Add alias struct tags for new decode hook 2020-06-01 10:39:51 -05:00
Kyle Havlovitz f9672f9bf1 Make sure IngressHosts isn't parsed during JSON decode 2020-05-06 15:06:14 -05:00
Chris Piraino f40833d094 Allow Hosts field to be set on an ingress config entry
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
2020-05-06 15:06:13 -05:00
Kyle Havlovitz c911174327
Add config entry/state for Ingress Gateways (#7483)
* Add Ingress gateway config entry and other relevant structs

* Add api package tests for ingress gateways

* Embed EnterpriseMeta into ingress service struct

* Add namespace fields to api module and test consul config write decoding

* Don't require a port for ingress gateways

* Add snakeJSON and camelJSON cases in command test

* Run Normalize on service's ent metadata

Sadly cannot think of a way to test this in OSS.

* Every protocol requires at least 1 service

* Validate ingress protocols

* Update agent/structs/config_entry_gateways.go

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
2020-03-31 11:59:10 -05:00
Matt Keeler 9e5fd7f925
OSS Changes for various config entry namespacing bugs (#7226) 2020-02-06 10:52:25 -05:00
Chris Piraino 401221de58
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Matt Keeler a704ebe639
Add Namespace support to the API module and the CLI commands (#6874)
Also update the Docs and fixup the HTTP API to return proper errors when someone attempts to use Namespaces with an OSS agent.

Add Namespace HTTP API docs

Make all API endpoints disallow unknown fields
2019-12-06 11:14:56 -05:00
Sarah Adams 78ad8203a4
Use encoding/json as JSON decoder instead of mapstructure (#6680)
Fixes #6147
2019-10-29 11:13:36 -07:00
Freddy fdd10dd8b8
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
R.B. Boyer 6393edba53
connect: reconcile how upstream configuration works with discovery chains (#6225)
* connect: reconcile how upstream configuration works with discovery chains

The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:

- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.

- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).

- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).

- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).

- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).

If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.

Fixes #6159
2019-08-01 22:03:34 -05:00
R.B. Boyer 8564b6bb38
connect: validate upstreams and prevent duplicates (#6224)
* connect: validate upstreams and prevent duplicates

* Actually run Upstream.Validate() instead of ignoring it as dead code.

* Prevent two upstreams from declaring the same bind address and port.
  It wouldn't work anyway.

* Prevent two upstreams from being declared that use the same
  type+name+namespace+datacenter. Due to how the Upstream.Identity()
  function worked this ended up mostly being enforced in xDS at use-time,
  but it should be enforced more clearly at register-time.
2019-08-01 13:26:02 -05:00
Matt Keeler 3053342198
Envoy Mesh Gateway integration tests (#6187)
* Allow setting the mesh gateway mode for an upstream in config files

* Add envoy integration test for mesh gateways

This necessitated many supporting changes in most of the other test cases.

Add remote mode mesh gateways integration test
2019-07-24 17:01:42 -04:00
Matt Keeler 4728329aeb
Various Gateway Fixes (#6093)
* Ensure the mesh gateway configuration comes back in the api within each upstream

* Add a test for the MeshGatewayConfig in the ToAPI functions

* Ensure we don’t use gateways for dc local connections

* Update the svc kind index for deletions

* Replace the proxycfg.state cache with an interface for testing

Also start implementing proxycfg state testing.

* Update the state tests to verify some gateway watches for upstream-targets of a discovery chain.
2019-07-12 17:19:37 -04:00
Matt Keeler 6e65811db2
Envoy CLI bind addresses (#6107)
* Ensure we MapWalk the proxy config in the NodeService and ServiceNode structs

This gets rid of some json encoder errors in the catalog endpoints

* Allow passing explicit bind addresses to envoy

* Move map walking to the ConnectProxyConfig struct

Any place where this struct gets JSON encoded will benefit as opposed to having to implement it everywhere.

* Fail when a non-empty address is provided and not bindable

* camel case

* Update command/connect/envoy/envoy.go

Co-Authored-By: Paul Banks <banks@banksco.de>
2019-07-12 12:57:31 -04:00
Matt Keeler bdebe62fd0
Fix some tests that I broke when refactoring the ConfigSnapshot (#6051)
* Fix some tests that I broke when refactoring the ConfigSnapshot

* Make sure the MeshGateway config is added to all the right api structs

* Fix some more tests
2019-07-01 19:47:58 -04:00
Matt Keeler 8d953f5840 Implement Mesh Gateways
This includes both ingress and egress functionality.
2019-07-01 16:28:30 -04:00
Paul Banks 421ecd32fc
Connect: allow configuring Envoy for L7 Observability (#5558)
* Add support for HTTP proxy listeners

* Add customizable bootstrap configuration options

* Debug logging for xDS AuthZ

* Add Envoy Integration test suite with basic test coverage

* Add envoy command tests to cover new cases

* Add tracing integration test

* Add gRPC support WIP

* Merged changes from master Docker. get CI integration to work with same Dockerfile now

* Make docker build optional for integration

* Enable integration tests again!

* http2 and grpc integration tests and fixes

* Fix up command config tests

* Store all container logs as artifacts in circle on fail

* Add retries to outer part of stats measurements as we keep missing them in CI

* Only dump logs on failing cases

* Fix typos from code review

* Review tidying and make tests pass again

* Add debug logs to exec test.

* Fix legit test failure caused by upstream rename in envoy config

* Attempt to reduce cases of bad TLS handshake in CI integration tests

* bring up the right service

* Add prometheus integration test

* Add test for denied AuthZ both HTTP and TCP

* Try ANSI term for Circle
2019-04-29 17:27:57 +01:00
Matt Keeler afa1cc98d1
Implement data filtering of some endpoints (#5579)
Fixes: #4222 

# Data Filtering

This PR will implement filtering for the following endpoints:

## Supported HTTP Endpoints

- `/agent/checks`
- `/agent/services`
- `/catalog/nodes`
- `/catalog/service/:service`
- `/catalog/connect/:service`
- `/catalog/node/:node`
- `/health/node/:node`
- `/health/checks/:service`
- `/health/service/:service`
- `/health/connect/:service`
- `/health/state/:state`
- `/internal/ui/nodes`
- `/internal/ui/services`

More can be added going forward and any endpoint which is used to list some data is a good candidate.

## Usage

When using the HTTP API a `filter` query parameter can be used to pass a filter expression to Consul. Filter Expressions take the general form of:

```
<selector> == <value>
<selector> != <value>
<value> in <selector>
<value> not in <selector>
<selector> contains <value>
<selector> not contains <value>
<selector> is empty
<selector> is not empty
not <other expression>
<expression 1> and <expression 2>
<expression 1> or <expression 2>
```

Normal boolean logic and precedence is supported. All of the actual filtering and evaluation logic is coming from the [go-bexpr](https://github.com/hashicorp/go-bexpr) library

## Other changes

Adding the `Internal.ServiceDump` RPC endpoint. This will allow the UI to filter services better.
2019-04-16 12:00:15 -04:00
R.B. Boyer f4a3b9d518
fix typos reported by golangci-lint:misspell (#5434) 2019-03-06 11:13:28 -06:00
Paul Banks 0f27ffd163 Proxy Config Manager (#4729)
* Proxy Config Manager

This component watches for local state changes on the agent and ensures that each service registered locally with Kind == connect-proxy has it's state being actively populated in the cache.

This serves two purposes:
 1. For the built-in proxy, it ensures that the state needed to accept connections is available in RAM shortly after registration and likely before the proxy actually starts accepting traffic.
 2. For (future - next PR) xDS server and other possible future proxies that require _push_ based config discovery, this provides a mechanism to subscribe and be notified about updates to a proxy instance's config including upstream service discovery results.

* Address review comments

* Better comments; Better delivery of latest snapshot for slow watchers; Embed Config

* Comment typos

* Add upstream Stringer for funsies
2018-10-10 16:55:34 +01:00
Paul Banks 1e7eace066 Add SidecarService Syntax sugar to Service Definition (#4686)
* Added new Config for SidecarService in ServiceDefinitions.

* WIP: all the code needed for SidecarService is written... none of it is tested other than config :). Need API updates too.

* Test coverage for the new sidecarServiceFromNodeService method.

* Test API registratrion with SidecarService

* Recursive Key Translation 🤦

* Add tests for nested sidecar defintion arrays to ensure they are translated correctly

* Use dedicated internal state rather than Service Meta for tracking sidecars for deregistration.

Add tests for deregistration.

* API struct for agent register. No other endpoint should be affected yet.

* Additional test cases to cover updates to API registrations
2018-10-10 16:55:34 +01:00
Paul Banks b83bbf248c Add Proxy Upstreams to Service Definition (#4639)
* Refactor Service Definition ProxyDestination.

This includes:
 - Refactoring all internal structs used
 - Updated tests for both deprecated and new input for:
   - Agent Services endpoint response
   - Agent Service endpoint response
   - Agent Register endpoint
     - Unmanaged deprecated field
     - Unmanaged new fields
     - Managed deprecated upstreams
     - Managed new
   - Catalog Register
     - Unmanaged deprecated field
     - Unmanaged new fields
     - Managed deprecated upstreams
     - Managed new
   - Catalog Services endpoint response
   - Catalog Node endpoint response
   - Catalog Service endpoint response
 - Updated API tests for all of the above too (both deprecated and new forms of register)

TODO:
 - config package changes for on-disk service definitions
 - proxy config endpoint
 - built-in proxy support for new fields

* Agent proxy config endpoint updated with upstreams

* Config file changes for upstreams.

* Add upstream opaque config and update all tests to ensure it works everywhere.

* Built in proxy working with new Upstreams config

* Command fixes and deprecations

* Fix key translation, upstream type defaults and a spate of other subtele bugs found with ned to end test scripts...

TODO: tests still failing on one case that needs a fix. I think it's key translation for upstreams nested in Managed proxy struct.

* Fix translated keys in API registration.
≈

* Fixes from docs
 - omit some empty undocumented fields in API
 - Bring back ServiceProxyDestination in Catalog responses to not break backwards compat - this was removed assuming it was only used internally.

* Documentation updates for Upstreams in service definition

* Fixes for tests broken by many refactors.

* Enable travis on f-connect branch in this branch too.

* Add consistent Deprecation comments to ProxyDestination uses

* Update version number on deprecation notices, and correct upstream datacenter field with explanation in docs
2018-10-10 16:55:34 +01:00