1. Unskip some trivial tests that were being tested higher up
2. Istanbul ignore some code for coverage.
1. Things that I didn't write and need to 100% follow
2. The source code checking test that has Istanbul code injected into
it
3. Add a few simple test cases
4. Support passing port numbers through to `ember serve` and `ember
test` for use cases that would benefit from being able to configure the
ports things are served over but still use `yarn run` thus reusing the
`yarn run` config in `package.json`
Repositories are a class of services to help with CRUD actions, most of
the functionality is reused across various Models. This creates a new
repository service that centralizes all this reused functionality.
Inheritance via ember `Service.extend` is used as opposed to
decorating via Mixins.
1. Move all repository services (and their tests) to a
services/repository folder
2. Standardize on a singular name format 'node vs nodes'
3. Create a new 'repository' service to centralize functionality. This
should be extended by 'repository' services
Essentially this was missing a call to `super`. The error unfortuantely
didn't arise in the tests as it only errors when the node list has 4
items are more (the 4 columns), and the acceptence tests by change were
only filling the page with 3 nodes for test purposes.
I've bumped the amount of nodes up to 4 in the tests, which then causes
the tests to fail, made the fix by adding the `super` call, and the
tests now pass.
I also tested the UI/text searching on a 10,000 node system, and
everything now works as expected.
1. The grid based unhealthy cards are now clamped to only four wide
maximum. This means that on larger screen the cards are much wider
meaning you can view more information. Grid gutters are also clamped at
a certain ideal width screen, remaining responsive for anything below
this.
2. The healthy node columns are finally responsive following the same
column rules as unhealthy nodes
Upgrade all patch and minor upgradeable packages, also uses `only`
in ember-cli-build to reduce the included helpers from certain helper
packages.
Make some major version upgrades for some dev tools
- husky
- lint-staged
- ember-cli-yadda
- ember-cli-sass (also moved from node-sass to dart-sass)
Minor tweak: spotted css file (instead of scss file), rename
The move to `dart-sass`:
dart-sass has been the primary implementation of sass for ~6 months and
will receive updates earlier than libsass (ruby-sass itself is now deprecated)
Other benefits include not having to recompile (via `npm rebuild` or similar)
when switching platforms and an 'almost' javascript based solution.
This update also alters some media queries that, whilst wouldn't compile
anymore with either an updated libsass or dart-sass, where probably a
little over complicated anyway, I've therefore made them similar to
other breakpoints that made sense.
Various ember addons produced deprecation messages, some in the browser
console and some in terminal. Upgrading and replacing some of these has
reduced this.
Upgrades:
- ember-collection
- ember-computed-style
Replacements:
- ember-pluralize replaced with ember-inflector
- ember-cli-format-number replaced with custom helper using standard
`toLocaleString`
Removing ember-cli-format-number also meant some further changes related
to decimal places in the tomography graph, done using `toFixed`
The ExternalSources background-images have also now been escaped
correctly preventing in-development `console` warnings.
The only deprecation warnings are now from ember-block-slots, only in
terminal, making for a better development experience overall, especially now we
have an empty browser console
Also adds a `callIfType` 'helper util' which is a util specifically for helpers (it conforms to a helper argument signature) to be expanded upon later.
1. The 'Services' header need to be knocked ot the right slightly to line
up properly with the service name when there are no external source
icons.
2. Add a single space between ServiceName and ServiceID on the Node >
[Services] tab table.
* Move almost everything to use %frames
* Fix pill styles of ACL types
* Remove horizontal scrollbars from dom recycling scroller component
* Make text areas look ok in Firefox
* Remove ember-bulma-css
* New form elements, break out %toggle
* %button design tweaks
* %form-element design tweaks
* Better hashicorp logo
* Small screen CSS improvements (#4624)
1. Reduce header size when there are no breadcrumbs
2. Make the filters toggleable, closed by default
3. Reduce the size of the footer on small screens
4. Hide all non-primary columns for forms
5. Slightly change the layout of various items, mainly buttons within
forms
6. Make some confirmation dialogs work vertically on small screens. Guessing we might be better just using native confirmations on small
screens
Sets the code toggle on the KV edit/create page to be on by default, we figured most people probably prefer this view.
Also, previously we forced the KV toggle back to a default setting for every
time you visited a KV form page. We've now changed this so that the KV code
toggle button acts as a 'global' toggle. So whatever you set it as will
be the same for every KV for the lifetime of your 'ember session'
If we are to keep this, then consider saving this into localStorage
settings or similar, added some thoughts in comments re: this as it's very likely
to happen.
The error notification was being shown on creation of an intention. This
was as a result of #4572 and/or #4572 and has not been included in a
release.
This includes a fix, plus tests to try to prevent any further regression.
1. Addition of external source icons for services marked as such.
2. New %with-tooltip css component (wip)
3. New 'no healthcheck' icon as external sources might not have
healthchecks, also minus icon on node cards in the service detail view
4. If a service doesn't have healthchecks, we use the [Services] tabs as the
default instead of the [Health Checks] tab in the Service detail page.
5. `css-var` helper. The idea here is that it will eventually be
replaced with pure css custom properties instead of having to use JS. It
would be nice to be able to build the css variables into the JS at build
time (you'd probably still want to specify in config which variables you
wanted available in JS), but that's possible future work.
Lastly there is probably a tiny bit more testing edits here than usual,
I noticed that there was an area where the dynamic mocking wasn't
happening, it was just using the mocks from consul-api-double, the mocks
I was 'dynamically' setting happened to be the same as the ones in
consul-api-double. I've fixed this here also but it wasn't effecting
anything until actually made certain values dynamic.
When adding an auto resizing (heightwise) code editor, the
ivy-codemirror plugin seems to do this using more nested divs. This div
had a horizontal scroller but couldn't be seen on some platforms (with
hidden scrollbars). This commit makes the code editor slightly more
usable and more visually correct by removing the scroll bar in this div
to stop producing the 'split view look', yet keeping the horizontal
scroller at the bottom of the code editor for when you enter code that
is wider than the area. A max-width has also been added here to prevent
the text area from growing off the side of the page.
Another improvement to the code editor here is the addition of a nicer
color for hightlighting text selection so its at least visible.
Lastly, there was a way you could get the bottom horizontal scrollbar to overlay
the code in the editor. This makes sure there is always some space at
the bottom of the editor to make sure the code won't be obscured
1. The previously used TextEncoder/Decoder (used as a polyfill for
browsers that don't have a native version) didn't expose an encoder via
CommonJS. Use a different polyfill that exposes both a decoder and an
encoder.
2. The feature detection itself was flawed. This does a less error prone
detection that ensures native encoding/decoding where available and polyfilled
encoding/decoding where not available.
* Move notification texts to a slightly different layer (#4572)
* Further Simplify/refactor the actions/notification layer (#4573)
1. Move the 'with-feedback' actions to a 'with-blocking-action' mixin
which better describes what it does
2. Additional set of unit tests almost over the entire layer to prove
things work/add confidence for further changes
The multiple 'with-action' mixins used for every 'index/edit' combo are
now reduced down to only contain the functionality related to their
specific routes, i.e. where to redirect.
The actual functionality to block and carry out the action and then
notify are 'almost' split out so that their respective classes/objects do
one thing and one thing 'well'.
Mixins are chosen for the moment as the decoration approach used by
mixins feels better than multiple levels of inheritence, but I would
like to take this fuether in the future to a 'compositional' based
approach.
There is still possible further work to be done here, but I'm a lot
happier now this is reduced down into separate parts.
* Begin refactoring CSS into component folders. Moved most
components into layout/skin folders, left out a couple of ones I want
to think about more.
* Adjust grays based on recent Structure changes
* Switch to fullscreen layout for lists and detail, left aligned forms (#4435)
* Specifically use the 'actions_close' label, not just the :last-child (actions-group)
* Replace some non-var-ed colours in vaults code skin, plus prefixing (black and white)
ui: Repo layer integration tests for methods that touch the API
Includes a `repo` test helper to make repetitive tasks easier, plus a
injectable reporter for sending performance metrics to a centralized metrics
system
Also noticed somewhere in the ember models that I'd like to improve, but left
for the moment to make sure I concentrate on one task at a time, more or less:
The tests currently asserts against the existing JSON tree, which doesn't
seem to be a very nice tree.
The work at hand here is to refactor what is there, so test for the not
nice tree to ensure we don't get any regression, and add a skipped test
so I can come back here later
WIP Unskip some lower level trivial tests.
This is the beginning of work to unskip some of the more trivial tests that I'd skipped a while back (if the thing they are testing broke, they would have failed higher up in other acceptance tests).
I'd rather keep the tests, as they do test things in a more isolated manner, and the plan was to always come back and work to unskip them time allowing.
I didn't get to far into this work in progress here, but I'd rather merge what I've done all the same and come back at a later date and continue.
1. Split the resizing functionality of into a separate mixin to be
shared across components
2. Add basic integration tests to prove that everything is getting
called through out the lifetime of the app. I decided against unit
testing as there isn't really any isolated logic to be tested, more
checking that things are being called in the correct order etc i.e. the
integration is correct.
Adds assertion to with-resizing so its obvious to override `resize`
* Add some tests to check the correct GET API endpoints are called
* Refactor adapters
1. Add integration tests for `urlFor...` and majority `handleResponse` methods
2. Refactor out `handleResponse` a little more into single/batch/boolean
methods
3. Move setting of the `Datacenter` property into the `handleResponse`
method, basically the same place that the uid is being set using the dc
parsed form the URL
4. Add some Errors for if you don't pass ids to certain `urlFor` methods
1. In the Services > Services detail page for both healthy and unhealthy
nodes, also add searching by Service.ID here
2. In the Nodes > Node detail > [Services] tab only if its different
from the Service name, add searching by Service.ID here
We now essentially do 2 redirects if you hit a `folder/`
1. If you visit `/ui/dc1/kv/folder/`, `consul` will redirect you to `/ui/dc1/kv/folder`
2. Once redirected to `/ui/dc1/kv/folder` via a 301, use ember/history
API to redirect you back to `/ui/dc1/kv/folder/`.
Bit long winded, but achieves what we want without having to get stuck
into `consul` itself to remove the 301 for the UI
The Consul API can pass through `Value: null` which does not get cast to
a string by ember-data. This snowballs into problems with `atob` which
then tried to decode `null`.
There are 2 problems here.
1. `Value` should never be `null`
- I've added a removeNull function to shallowly loop though props and
remove properties that are `null`, for the moment this is only on
single KV JSON responses - therefore `Value` will never be `null`
which is the root of the problem
2. `atob` doesn't quite follow the `window.atob` API in that the
`window.atob` API casts everything down to a string first, therefore it
will try to decode `null` > `'null'` > `crazy unicode thing`.
- I've commented in a fix for this, but whilst this shouldn't be
causing anymore problems in our UI (now that `Value` is never `null`),
I'll uncomment it in another future release. Tests are already written
for it which more closely follow `window.atob` but skipped for now
(next commit)
John Cowen
John Cowen