* Update empty-state copy throughout app
Update empty-states throughout the app to only include mentions of ACLs if the user has ACLs enabled.
* Update peers empty state copy
Flip the empty state copy logic for peers. Small typo fixes on other empty states.
* Update Node empty state with docs
* Update intentions empty state
Make ACL copy dependent on if acls are enabled.
* Update Nodes empty state learn copy
* Fix binding rule copy key
* Fix await page-object properties properly
* Remove "sleep"-hack show-routing test
* Fix - change serviceInstacesSelected test order
We need to change the order of test as the tab-nav
tab-elements are actually clickable and will be triggered
via the "see" step.
Because we are now properly awaiting these promises
we need to change the test order and check if the
service-instances tab is selected first, as the following
steps will actually click the respective tabs during
testing and thus change what is selected
on the tab-nav.
* Update ember-cli-page-object to latest
* Refactor remaining `moduleFor`-tests
`moduleFor*` will be removed from ember-qunit v5
* Upgrade ember-qunit to v5
* Update how we use ember-sinon-qunit
With ember-qunit v5 we need to use ember-sinon-qunit differently.
* Fix submit-blank test
We can't click on disabled buttons with new test-helpers.
We need to adapt the test accordingly.
* Make sure we await fill-in with form yaml step
We need to await `fill-in`. This changes the reducer
function in the step to create a proper await
chain.
* Fix show-routing test
We need to await a tick before visiting again.
* Remove redundant `wait one tick`-step
* remove unneeded "next Tick" promise from form step
* Increase timeout show-routing feature
* Comment on pause hack for show-routing test
* ui: Make peered intentions read-only
* Replace "" to undefined for SourcePeer so its the same as PeerName
* Fixup copypasta
* Ensure tests run with no peers
* Only show instances- and tags-tab peered services
* Adapt show-with-slashes test to peering changes
Tests always have the peering feature turned on and the default service
we load from the mock-api will be peered. This is why the topology
view of the service.show page will not be accessible in the updated
test it will show the instances instead. This change does not change
what the test is actually testing so just putting changing to the now
different url is fine.
* Don't request nodes/services `with-peers` anymore
This will be automatic - no need for the query-param anymore.
* Return peering data based on feature flag mock-api services/nodes
* Update tests to reflect removed with-peers query-param
* setup cookie for turning peer feature flag on in mock-api in testing
* Add missing `S` for renamed PEERING feature-flag cookie
* add peers route
* add peers to nav
* use regular app ui patterns peers template
* use empty state in peers UI
* mock `v1/peerings` request
* implement custom adapter/serializer for `peers`-model
* index request for peerings on peers route
* update peers list to show as proper list
* Use tailwind for easier styling
* Unique ids in peerings response mock-api
* Add styling peerings list
* Allow creating empty tooltip
To make it easier to iterate over a set of items where some items
should not display a tooltip and others should.
* Add tooltip Peerings:Badge
* Add undefined peering state badge
* Remove imported/exported services count peering
This won't be included in the initial version of the API response
* Implement Peerings::Search
* Make it possible to filter peerings by name
* Install ember-keyboard
For idiomatic handling of key-presses.
* Clear peering search input when pressing `Escape`
* use peers.index instead of peers for peerings listing
* Allow to include peered services in services-query
* update services mock to add peerName
* add Consul::Peer component
To surface peering information on a resource
* add PeerName as attribute to service model
* surface peering information in service list
* Add tooltip to Consul::Peer
* Make services searchable by peer-name
* Allow passing optional query-params to href-to
* Add peer query-param to dc.services.show
* Pass peer as query-param services listing
* support option peer route-param
* set peer-name undefined in services serializer when empty
* update peer route-param when navigating to peered service
* request sercice with peer-name if need be
* make sure to reset peer route-param when leaving service.show
* componentize services.peer-info
* surface peer info services.show
* make sure to reset peer route-param in main nav
* fix services breadcrumb services.intentions
we need to reset peer route-param here to not break the app
* surface peer when querying for it on service api call
* query for peer info service-instance api calls
* surface peer info service-instance.show
* Camelize peer attributes to match rest of app
* Refactor peers.index to reflect camelized attributes for peer
* Remove unused query-params services.show
* make logo href reset peer route-param
* Cleanup optional peer param query service-instance
* Use replace decorator instead of serializer for empty peerName
* make sure to only send peer info when correct qp is passed
* Always send qp for querying peers services request
* rename with-imports to with-peers
* Use css for peer-icon
* Refactor bucket-list component to surface peer-info
* Remove Consul::Peer component
This info is now displayed via the bucket-list component
* Fix bucket-list component to surface service again
* Update bucket-list docs to reflect peer-info addition
* Remove tailwind related styles
* Remove consul-tailwind package
We won't be using tailwind for now
* Fix typo badge scss
* Add with-import handling mock-api nodes
* Add peerName to node attributes
* include peers when querying nodes
* reflect api updates node list mock
* Create consul::node::peer-info component
* Surface peer-info in nodes list
* Mock peer response for node request
* Make it possible to add peer-name to node request
* Update peer route-param when linking to node
* Reset peers route-param when leaving nodes.show
We need to reset the route-param to not introduce a bug - otherwise
subsequent node show request would request with the old peer query-param
* Add sourcePeer intentions api mock
* add SourcePeer attr to intentions model
* Surface peering info on intentions list
* Request peered intentions differently intentions.edit
* Handle peer info in intentions/exact mock
* Surface peering info intention view
* Add randomized peer data topology mock
* Surface peer info topology view
* fix service/peer-info styling
We aren't using tailwind anymore - we need to create a custom scss file
* Update peerings api mocks
* Update peerings::badge with updated styling
* cleanup intentions/exact mock
* Create watcher component to declaratively register polling
* Poll peers in background when on peers route
* use existing colors for peering-badge
* Add test for requesting service with `with-peers`-query
* add imported/exported count to peers model
* update mock-api to surface exported/imported count on peers
* Show exported/imported peers count on peers list
* Use translations for service import/export UI peers
* Make sure to ask for nodes with peers
* Add match-url step for easier url testing of service urls
* Add test for peer-name on peered services
* Add test for service navigation peered service
* Implement feature-flag handling
* Enable peering feature in test and development
* Redirect peers to services.index when feature-flag is disabled
* Only query for peers when feature is enabled
* Only show peers in nav when feature is enabled
* Componentize peering service count detail
* Handle non-state Peerings::Badge
* Use Peerings::ServiceCount in peerings list
* Only send peer query for peered service-instances.
* Add step to visit url directly
* add test for accessing peered service directly
* Remove unused service import peers.index
* Only query for peer when peer provided node-adapter
* fix tests
This commit excludes the health of any service instances from the Node Listing page. This means that if you are viewing the Node listing page you will only see failing nodes if there are any Node Checks failing, Service Instance Health checks are no longer taken into account.
Co-authored-by: Jamie White <jamie@jgwhite.co.uk>
We noticed that the Service Instance listing on both Node and Service views where not taking into account proxy instance health. This fixes that up so that the small health check information in each Service Instance row includes the proxy instances health checks when displaying Service Instance health (afterall if the proxy instance is unhealthy then so is the service instance that it should be proxying)
* Refactor Consul::InstanceChecks with docs
* Add to-hash helper, which will return an object keyed by a prop
* Stop using/relying on ember-data type things, just use a hash lookup
* For the moment add an equivalent "just give me proxies" model prop
* Start stitching things together, this one requires an extra HTTP request
..previously we weren't even requesting proxies instances here
* Finish up the stitching
* Document Consul::ServiceInstance::List while I'm here
* Fix up navigation mocks Name > Service
The fix here is two fold:
- We shouldn't be providing the DataSource (which loads the data) with an id when we are creating from within a folder (in the buggy code we are providing the parentKey of the new KV you are creating)
- Being able to provide an empty id to the DataSource/KV repository and that repository responding with a newly created object is more towards the "new way of doing forms", therefore the corresponding code to return a newly created ember-data object. As we changed the actual bug in point 1 here, we need to make sure the repository responds with an empty object when the request id is empty.
We recently changed the intentions form to take a full model of a dc rather than just the string identifier (so {Name: 'dc', Primary: true} vs just 'dc' in order to know whether the DC is the primary or not.
Unfortunately, we only did this on the global intentions page not the per service intentions page. This makes it impossible to save an intention from the per service intention page (whilst you can still save intentions from the global intention page as normal).
The fix here pretty much copy/pastes the approach taken in the global intention edit template over to the per service intention edit template.
Tests have been added for creation in the per service intention section, which again are pretty much just copied from the global one, unfortunately this didn't exist previously which would have helped prevent this.
This commit uses all our new ways of doing things to Lock Sessions and their interactions with KV and Nodes. This is mostly around are new under-the-hood things, but also I took the opportunity to upgrade some of the CSS to reuse some of our CSS utils that have been made over the past few months (%csv-list and %horizontal-kv-list).
Also added (and worked on existing) documentation for Lock Session related components.
This sounds a bit 'backwards' as the end goal here is to add an improved UX to partitions, not namespaces. The reason for doing it this way is that Namespaces already has a type of 'improved UX' CRUD in that it has one to many relationship in the form when saving your namespaces (the end goal for partitions). In moving Namespaces to use the same approach as partitions we:
- Ensure the new approach works with one-to-many forms.
- Test the new approach without writing a single test (we already have a bunch of tests for namespaces which are now testing the approach used by both namespaces and partitions)
Additionally:
- Fixes issue with missing default nspace in the nspace selector
- In doing when checking to see that things where consistent between the two, I found a few little minor problems with the Admin Partition CRUD so fixed those up here also.
- Removed the old style Nspace notifications
* ui: Ensure dc selector correctly shows the currently selected dc
* ui: Restrict access to non-default partitions in non-primaries (#11420)
This PR restricts access via the UI to only the default partition when in a non-primary datacenter i.e. you can only have multiple (non-default) partitions in the primary datacenter.
* ui: Gracefully recover from non-existent DC errors
This PR fixes what happens in the UI if you try to navigate to a non-existing DC.
When we received a 500 error from an API response due to a non-existent DC, previously we would show a 404 error, which is what we were trying to convey. But in the spirit of the UI being a 'thin client', its probably best to just show the 500 error from the API response, which may help folks to debug any issues better.
* Automatically set the CONSUL_DATACENTER_LOCAL env var for testing
* ui: Ignore response from API for KV permissions
Currently there is no way for us to use our HTTP authorization API
endpoint to tell us whether a user has access to any KVs (including the
case where a user may not have access to the root KV store, but do have
access to a sub item)
This is a little weird still as in the above case the user would click
on this link and still get a 403 for the root, and then have to manually
type in the URL for the KV they do have access to.
Despite this we think this change makes sense as at least something about KV is
visible in the main navigation.
Once we have the ability to know if any KVs are accessible, we can add
this guard back in.
We'd initially just removed the logic around the button, but then
noticed there may be further related KV issues due to the nested nature
of KVs so we finally decided on simply ignoring the responses from the
HTTP API, essentially reverting the KV area back to being a thin client.
This means when things are revisited in the backend we can undo this
easily change in one place.
* Move acceptance tests to use ACLs perms instead of KV ones
This PR supersedes #10706 and fixes#10686 whilst making sure that saving intentions continues to work.
The original fix in #10706 ignored the change action configured for the change event on the menus, meaning that the selected source/destination namespace could not be set by the user when editing/creating intentions. This, coupled with the fact that using the later intention exact endpoint for API requests endpoint means that you could not use wildcard namespaces for saving intentions.
All in all this meant that intentions could no longer be saved using the UI (whilst using ENT)
This PR reverts #10706 to fix the intention saving issue, and adds a fix for the original visual issue of nspaces doubling up in the menu once clicked. This meant repeating the existing functionality for nspaces aswell as services. It did seem strange to me that the original issue was only apparent for the nspace menus and not the service menus which should all function exactly the same way.
There is potentially more to come here partly related to what the exact functionality should be, but I'm working with other folks to figure out what the best way forwards is longer term. In the meantime this brings us back to the original functionality with the visual issue fixed.
Squashed commits:
* Revert "ui: Fix dropdown option duplications (#10706)"
This reverts commit eb5512fb74.
* ui: Ensure additional nspaces are added to the unique list of nspaces
* Add some acceptance tests
* Add Partition to all our models
* Add partitions into our serializers/fingerprinting
* Make some amends to a few adapters ready for partitions
* Amend blueprints to avoid linting error
* Update all our repositories to include partitions, also
Remove enabled/disable nspace repo and just use a nspace with
conditionals
* Ensure nspace and parition parameters always return '' no matter what
* Ensure data-sink finds the model properly
This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more
* Add all the new partition data layer
* Add a way to set the title of the page from inside the route
and make it accessibile via a route announcer
* Make the Consul Route the default/basic one
* Tweak nspace and partition abilities not to check the length
* Thread partition through all the components that need it
* Some ACL tweaks
* Move the entire app to use partitions
* Delete all the tests we no longer need
* Update some Unit tests to use partition
* Fix up KV title tests
* Fix up a few more acceptance tests
* Fixup and temporarily ignore some acceptance tests
* Stop using ember-cli-page-objects fillable as it doesn't seem to work
* Fix lint error
* Remove old ACL related test
* Add a tick after filling out forms
* Fix token warning modal
* Found some more places where we need a partition var
* Fixup some more acceptance tests
* Tokens still needs a repo service for CRUD
* Remove acceptance tests we no longer need
* Fixup and "FIXME ignore" a few tests
* Remove an s
* Disable blocking queries for KV to revert to previous release for now
* Fixup adapter tests to follow async/function resolving interface
* Fixup all the serializer integration tests
* Fixup service/repo integration tests
* Fixup deleting acceptance test
* Fixup some ent tests
* Make sure nspaces passes the dc through for when thats important
* ...aaaand acceptance nspaces with the extra dc param
This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app.
The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions.
Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case.
Notes:
Added a PartitionAbility while we were there (not used as yet)
Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP.
We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different!
We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet.
All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
Adds 'can access ACLs' which means one of two things
1. When ACLs are disabled I can access the 'please enable ACLs' page
2. When ACLs are enabled, its the same as canRead
When clicking to create a KV within folder name, would would be viewing a form that was a form for creating a KV in the root, which when the user clicked to save, saved the KV in the root.
For the moment at least I've removed the code that strips double slashes, and whilst this isn't ideal, it looks like we've picked up one of those bugs that turns into a 'feature', and completely reworking KV to not rely on the double slashes is not really an option right now.
* Create and use collapsible notices
* Refactor collapsible-notices
* Split up the topology acceptance tests
* Add acceptance tests for tproxy notices
* Add component file
* Adds additional TProxy notices tests
* Adds conditional to only show collapsable if more than 2 notices are present
* Adds changelog
* Refactorting the conditonal for collapsing the notices
* Renaming undefinedIntention to be notDefinedIntention
* Refactor tests
When the Consul serf health check is failing, this means that the health checks registered with the agent may no longer be correct. Therefore we show a notice to the user when we detect that the serf health check is failing both for the health check listing for nodes and for service instances.
There were a few little things we fixed up whilst we were here:
- We use our @replace decorator to replace an empty Type with serf in the model.
- We noticed that ServiceTags can be null, so we replace that with an empty array.
- We added docs for both our Notice component and the Consul::HealthCheck::List component. Notice now defaults to @type=info.
* Add before and after skip links portals
* Move EmptyState and ErrorState to use a @login action/function
* Move page title setting to the Route component
* Add Routes and Outlets everywhere, and use those to access login modal
* Add some aria-labels to the modals
* Docs
* Remove the label/input now we no longer need it, fixup pageobject
* Add basic modal docs
* Switch out old toggle names for ids
* Wrap nspace Route template in a Route component
* type > class
wenincode
Tyler Wendlandt
John Cowen
Michael Klein
Evan Rowe
Kenia