Previously we could get into a state where discovery chain entries were
not cleaned up after the associated watch was cancelled. These changes
add handling for that case where stray chain references are encountered.
When a URL path is not found, return a non-empty message with the 404 status
code to help the user understand what went wrong. If the URL path was not
prefixed with '/v1/', suggest that may be the cause of the problem (which is a
common mistake).
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
This query has been incorrectly querying by accessor ID since New ACLs
were added. However, the legacy token compat allowed this to continue to
work, since it made a fallback query for the anonymousToken ID.
PR #11184 removed this legacy token query, which means that the query by
accessor ID is now the only check for the anonymous token's existence.
This PR updates the GetBySecret call to use the secret ID of the token.
These helper functions actually end up hiding important setup details
that should be visible from the test case. We already have a convenient
way of setting this config when calling newTestServerWithConfig.
I suspect one problem was that we set structs.IntermediateCertRenewInterval to 1ms, which meant
that in some cases the intermediate could renew before we stored the original value.
Another problem was that the 'wait for intermediate' loop was calling the provider.ActiveIntermediate,
but the comparison needs to use the RPC endpoint to accurately represent a user request. So
changing the 'wait for' to use the state store ensures we don't race.
Also moves the patching into a separate function.
Removes the addition of ca.CertificateTimeDriftBuffer as part of calculating halfTime. This was added
in a previous commit to attempt to fix the flake, but it did not appear to fix the problem. Adding the
time here was making the tests fail when using the shared patch
function. It's not clear to me why, but there's no reason we should be
including this time in the halfTime calculation.
Use the new verifyLearfCert to show the cert verifies with intermediates
from both sources. This required using the RPC interface so that the
leaf pem was constructed correctly.
Add IndexedCARoots.Active since that is a common operation we see in a
few places.
Previously we had a couple copies that reproduced the FSM operation.
These copies introduce risk that the test does not accurately match
production.
This PR removes the test versions of the FSM operation, and exports the
real production FSM operation so that it can be used in tests.
The consul provider tests did need to change because of this. Previously
we would return a hardcoded value of 2, but in production this value is
always incremented.
Failing over to a partition is more siimilar to failing over to another
datacenter than it is to failing over to a namespace. In a future
release we should update how localities for failover are specified. We
should be able to accept a list of localities which can include both
partition and datacenter.
* Add partition fields to targets like service route destinations
* Update validation to prevent cross-DC + cross-partition references
* Handle partitions when reading config entries for disco chain
* Encode partition in compiled targets
Fixes a bug whereby servers present in multiple network areas would be
properly segmented in the Router, but not in the gRPC mirror. This would
lead servers in the current datacenter leaving from a network area
(possibly during the network area's removal) from deleting their own
records that still exist in the standard WAN area.
The gRPC client stack uses the gRPC server tracker to execute all RPCs,
even those targeting members of the current datacenter (which is unlike
the net/rpc stack which has a bypass mechanism).
This would manifest as a gRPC method call never opening a socket because
it would block forever waiting for the current datacenter's pool of
servers to be non-empty.
Given that we do not allow wildcard partitions in intentions, no one ixn
can override the DefaultAllow setting. Only the default ACL policy
applies across all partitions.
This table purposefully does not index by partition/namespace. It's a
global view into all service names.
This table is intended to replace the current serviceListTxn watch in
intentionTopologyTxn. For cross-partition transparent proxying we need
to be able to calculate upstreams from intentions in any partition. This
means that the existing serviceListTxn function is insufficient since
it's scoped to a partition.
Moving away from that function is also beneficial because it watches the
main "services" table, so watchers will wake up when any instance is
registered or deregistered.
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
* convert `IndexID` of `session_checks` table
* convert `indexSession` of `session_checks` table
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* fix oss linter
* fix review comments
* remove partition for Checks as it's always use the session partition
* fix tests
* fix tests
* do not namespace nodeChecks index
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Cross port of ent #1383 "Reject non-default datacenter when making partitioned ACLs"
On the OSS side this is a minor refactor to add some more checks that are only applicable to enterprise code.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
The test added in this commit shows the problem. Previously the
SigningKeyID was set to the RootCert not the local leaf signing cert.
This same bug was fixed in two other places back in 2019, but this last one was
missed.
While fixing this bug I noticed I had the same few lines of code in 3
places, so I extracted a new function for them.
There would be 4 places, but currently the InitializeCA flow sets this
SigningKeyID in a different way, so I've left that alone for now.
While working on the CA system it is important to be able to run all the
tests related to the system, without having to wait for unrelated tests.
There are many slow and unrelated tests in agent/consul, so we need some
way to filter to only the relevant tests.
This PR renames all the CA system related tests to start with either
`TestCAMananger` for tests of internal operations that don't have RPC
endpoint, or `TestConnectCA` for tests of RPC endpoints. This allows us
to run all the test with:
go test -run 'TestCAMananger|TestConnectCA' ./agent/consul
The test naming follows an undocumented convention of naming tests as
follows:
Test[<struct name>_]<function name>[_<test case description>]
I tried to always keep Primary/Secondary at the end of the description,
and _Vault_ has to be in the middle because of our regex to run those
tests as a separate CI job.
You may notice some of the test names changed quite a bit. I did my best
to identify the underlying method being tested, but I may have been
slightly off in some cases.
As a method on the struct type this would not be safe to call without first checking
c.isIntermediateUsedToSignLeaf.
So for now, move this logic to the CAMananger, so that it is always correct.
We were not adding the local signing cert to the CARoot. This commit
fixes that bug, and also adds support for fixing existing CARoot on
upgrade.
Also update the tests for both primary and secondary to be more strict.
Check the SigningKeyID is correct after initialization and rotation.
Validation was added on the config entry kind since that is called when
validating config entries to bootstrap via agent configuration and when
applying entries via the config RPC endpoint.
Previously we believe it was necessary for all code that required ports
to use freeport to prevent conflicts.
https://github.com/dnephin/freeport-test shows that it is actually save
to use port 0 (`127.0.0.1:0`) as long as it is passed directly to
`net.Listen`, and the listener holds the port for as long as it is
needed.
This works because freeport explicitly avoids the ephemeral port range,
and port 0 always uses that range. As you can see from the test output
of https://github.com/dnephin/freeport-test, the two systems never use
overlapping ports.
This commit converts all uses of freeport that were being passed
directly to a net.Listen to use port 0 instead. This allows us to remove
a bit of wrapping we had around httptest, in a couple places.
In d2ab767fef raftApply was changed to handle this check in
a single place, instad of having every caller check it. It looks like these few places
were missed when I did that clean up.
This commit removes the remaining resp.(error) checks, since they are all no-ops now.
This function is only ever called from operations that have already acquired the state lock, so checking
the value of state can never fail.
This change is being made in preparation for splitting out a separate type for the secondary logic. The
state can't easily be shared, so really only the expored top-level functions should acquire the 'state lock'.
This commit removes the actingSecondaryCA field, and removes the stateLock around it. This field
was acting as a proxy for providerRoot != nil, so replace it with that check instead.
The two methods which called secondarySetCAConfigured already set the state, so checking the
state again at this point will not catch runtime errors (only programming errors, which we can catch with tests).
In general, handling state transitions should be done on the "entrypoint" methods where execution starts, not
in every internal method.
This is being done to remove some unnecessary references to c.state, in preparations for extracting
types for primary/secondary.
This makes it easier to fake, which will allow me to use the ConsulProvider as
an 'external PKI' to test a customer setup where the actual root CA is not
the root we use for the Consul CA.
Replaces a call to the state store to fetch the clusterID with the
clusterID field already available on the built-in provider.
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* remove partition for Checks as it's always use the session partition
* partition sessions index id table
* fix rebase issues
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
* convert `IndexID` of `session_checks` table
* convert `indexSession` of `session_checks` table
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* fix oss linter
* fix review comments
* remove partition for Checks as it's always use the session partition
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* Support vault auth methods for the Vault connect CA provider
* Rotate the token (re-authenticate to vault using auth method) when the token can no longer be renewed
The TrustDomain is populated from the Host() method which includes the
hard-coded "consul" domain. This means that despite having an empty
cluster ID, the TrustDomain won't be empty.
There are two restrictions:
- Writes from the primary DC which explicitly target a secondary DC.
- Writes to a secondary DC that do not explicitly target the primary DC.
The first restriction is because the config entry is not supported in
secondary datacenters.
The second restriction is to prevent the scenario where a user writes
the config entry to a secondary DC, the write gets forwarded to the
primary, but then the config entry does not apply in the secondary.
This makes the scope more explicit.
The duo of `makeUpstreamFilterChainForDiscoveryChain` and `makeListenerForDiscoveryChain` were really hard to reason about, and led to concealing a bug in their branching logic. There were several issues here:
- They tried to accomplish too much: determining filter name, cluster name, and whether RDS should be used.
- They embedded logic to handle significantly different kinds of upstream listeners (passthrough, prepared query, typical services, and catch-all)
- They needed to coalesce different data sources (Upstream and CompiledDiscoveryChain)
Rather than handling all of those tasks inside of these functions, this PR pulls out the RDS/clusterName/filterName logic.
This refactor also fixed a bug with the handling of [UpstreamDefaults](https://www.consul.io/docs/connect/config-entries/service-defaults#defaults). These defaults get stored as UpstreamConfig in the proxy snapshot with a DestinationName of "*", since they apply to all upstreams. However, this wildcard destination name must not be used when creating the name of the associated upstream cluster. The coalescing logic in the original functions here was in some situations creating clusters with a `*.` prefix, which is not a valid destination.
Fixes an issue described in #10132, where if two DCs are WAN federated
over mesh gateways, and the gateway in the non-primary DC is terminated
and receives a new IP address (as is commonly the case when running them
on ephemeral compute instances) the primary DC is unable to re-establish
its connection until the agent running on its own gateway is restarted.
This was happening because we always preferred gateways discovered by
the `Internal.ServiceDump` RPC (which would fail because there's no way
to dial the remote DC) over those discovered in the federation state,
which is replicated as long as the primary DC's gateway is reachable.
Currently getCARoots could return an empty object with an empty trust
domain before the CA is initialized. This commit returns an error while
there is no CA config or no trust domain.
There could be a CA config and no trust domain because the CA config can
be created in InitializeCA before initialization succeeds.
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused func `prefixIndexFromServiceNameAsString`
* fix test error check
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* partition kvs indexID table
* add `partitionedIndexEntryName` in oss for test purpose
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* remove entmeta reference from oss
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Previously secondaryInitialize would return nil in this case, which prevented the
deferred initialize from happening, and left the CA in an uninitialized state until a config
update or root rotation.
To fix this I extracted the common parts into the delegate implementation. However looking at this
again, it seems like the handling in secondaryUpdateRoots is impossible, because that function
should never be called before the secondary is initialzied. I beleive we can remove some of that
logic in a follow up.
These two fields do not appear to be used anywhere. We use the structs.ACLPolicy ID in the
ACLResolver cache, but the acl.Policy ID and revision are not used.
* Support Vault Namespaces explicitly in CA config
If there is a Namespace entry included in the Vault CA configuration,
set it as the Vault Namespace on the Vault client
Currently the only way to support Vault namespaces in the Consul CA
config is by doing one of the following:
1) Set the VAULT_NAMESPACE environment variable which will be picked up
by the Vault API client
2) Prefix all Vault paths with the namespace
Neither of these are super pleasant. The first requires direct access
and modification to the Consul runtime environment. It's possible and
expected, not super pleasant.
The second requires more indepth knowledge of Vault and how it uses
Namespaces and could be confusing for anyone without that context. It
also infers that it is not supported
* Add changelog
* Remove fmt.Fprint calls
* Make comment clearer
* Add next consul version to website docs
* Add new test for default configuration
* go mod tidy
* Add skip if vault not present
* Tweak changelog text
* Remove some usage of md5 from the system
OSS side of https://github.com/hashicorp/consul-enterprise/pull/1253
This is a potential security issue because an attacker could conceivably manipulate inputs to cause persistence files to collide, effectively deleting the persistence file for one of the colliding elements.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* add root_cert_ttl option for consul connect, vault ca providers
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* add changelog, pr feedback
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* Update .changelog/11428.txt, more docs
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Update website/content/docs/agent/options.mdx
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
if the provided value is empty string then the client services
(DNS, HTTP, HTTPS, GRPC) are not listening and the user is not notified
in any way about what's happening.
Also, since a not provided client_addr defaults to 127.0.0.1, we make sure
we are not getting unwanted warnings
Signed-off-by: Alessandro De Blasis <alex@deblasis.net>
This will behave the way we handle SNI and SPIFFE IDs, where the default
partition is excluded.
Excluding the default ensures that don't attempt to compare default.dc2
to dc2 in OSS.
The api module has decoding functions that rely on 'kind' being present
of payloads. This is so that we can decode into the appropriate api type
for the config entry.
This commit ensures that a static kind is marshalled in responses from
Consul's api endpoints so that the api module can decode them.
These labels should be set by whatever process scrapes Consul (for
prometheus), or by the agent that receives them (for datadog/statsd).
We need to remove them here because the labels are part of the "metric
key", so we'd have to pre-declare the metrics with the labels. We could
do that, but that is extra work for labels that should be added from
elsewhere.
Also renames the closure to be more descriptive.
Prometheus scrapes metrics from each process, so when leadership transfers to a different node
the previous leader would still be reporting the old cached value.
By setting NaN, I believe we should zero-out the value, so that prometheus should only consider the
value from the new leader.
Emit the metric immediately so that after restarting an agent, the new expiry time will be
emitted. This is particularly important when this metric is being monitored, because we want
the alert to resovle itself immediately.
Also fixed a bug that was exposed in one of these metrics. The CARoot can be nil, so we have
to handle that case.
TestSubscribeBackend_IntegrationWithServer_DeliversAllMessages has been
flaking a few times. This commit cleans up the test a bit, and improves
the failure output.
I don't believe this actually fixes the flake, but I'm not able to
reproduce it reliably.
The failure appears to be that the event with Port=0 is being sent in
both the snapshot and as the first event after the EndOfSnapshot event.
Hopefully the improved logging will show us if these are really
duplicate events, or actually different events with different indexes.
This commit updates mesh gateway watches for cross-partitions
communication.
* Mesh gateways are keyed by partition and datacenter.
* Mesh gateways will now watch gateways in partitions that export
services to their partition.
* Mesh gateways in non-default partitions will not have cross-datacenter
watches. They are not involved in traditional WAN federation.
partitionAuthorizer.config can be nil if it wasn't provided on calls to
newPartitionAuthorizer outside of the ACLResolver. This usage happens
often in tests.
This commit: adds a nil check when the config is going to be used,
updates non-test usage of NewPolicyAuthorizerWithDefaults to pass a
non-nil config, and dettaches setEnterpriseConf from the ACLResolver.
When issuing cross-partition service discovery requests, ACL filtering
often checks for NodeRead privileges. This is because the common return
type is a CheckServiceNode, which contains node data.
Previously the datacenter of the gateway was the key identifier, now it
is the datacenter and partition.
When dialing services in other partitions or datacenters we now watch
the appropriate partition.
useInDatacenter was used to determine whether the mesh gateway mode of
the upstream should be returned in the discovery chain target. This
commit makes it so that the mesh gateway mode is returned every time,
and it is up to the caller to decide whether mesh gateways should be
watched or used.
Existing config entries prefixed by service- are specific to individual
services. Since this config entry applies to partitions it is being
renamed.
Additionally, the Partition label was changed to Name because using
Partition at the top-level and in the enterprise meta was leading to the
enterprise meta partition being dropped by msgpack.
The code for this was already removed, which suggests this is not actually testing what it claims.
I'm guessing these are still resolving because the tokens are converted to non-legacy tokens?
It seems like this was missing. Previously this was only called by init of ACLs during an upgrade.
Now that legacy ACLs are removed, nothing was calling stop.
Also remove an unused method from client.
To make it more clear which methods are necessary for each scenario. This can
also prevent problems which force all DCs to use the same Vault instance, which
is currently a problem.
This function is only run when the CAManager is a primary. Extracting this function
makes it clear which parts of UpdateConfiguration are run only in the primary and
also makes the cleanup logic simpler. Instead of both a defer and a local var we
can call the cleanup function in two places.
This commit renames functions to use a consistent pattern for identifying the functions that
can only be called when the Manager is run as the primary or secondary.
This is a step toward eventually creating separate types and moving these methods off of CAManager.
Add changelog to document what changed.
Add entry to telemetry section of the website to document what changed
Add docs to the usagemetric endpoint to help document the metrics in code
This commit two test failures:
1. Remove check for "in legacy ACL mode", the actual upgrade will be removed in a following commit.
2. Remove the early WaitForLeader in dc2, because with it the test was
failing with ACL not found.
TestAgentLeaks_Server was reporting a goroutine leak without this. Not sure if it would actually
be a leak in production or if this is due to the test setup, but seems easy enough to call it
this way until we remove legacyACLTokenUpgrade.
We no long need to read the acl serf tag, because servers are always either ACL enabled or
ACL disabled.
We continue to write the tag so that during an upgarde older servers will see the tag.
This commit two test failures:
1. Remove check for "in legacy ACL mode", the actual upgrade will be removed in a following commit.
2. Use the root token in WaitForLeader, because without it the test was
failing with ACL not found.
As part of removing the legacy ACL system ACL upgrading and the flag for
legacy ACLs is removed from Clients.
This commit also removes the 'acls' serf tag from client nodes. The tag is only ever read
from server nodes.
This commit also introduces a constant for the acl serf tag, to make it easier to track where
it is used.
The DebugConfig in the self endpoint can change at any time. It's not a stable API.
This commit adds the XDSPort to a stable part of the XDS api, and changes the envoy command to read
this new field.
It includes support for the old API as well, in case a newer CLI is used with an older API, and
adds a test for both cases.
Replace it with an implementation that returns an error, and rename some symbols
to use a Deprecated suffix to make it clear.
Also remove the ACLRequest struct, which is no longer referenced.
freddygv
R.B. Boyer
Jared Kirschner
Jared Kirschner
Freddy
Kyle Havlovitz
Daniel Nephin
FFMMM
Daniel Nephin
Evan Culver
Dan Upton
Chris S. Kim
Mathew Estafanous
R.B. Boyer
Dhia Ayachi
Mark Anderson
Matt Keeler
Iryna Shustava
Will Jordan
Giulio Micheloni
Connor
Alessandro De Blasis
Konstantine
Paul Banks
Paul Banks
Bisakh Mondal
tarat44
Joshua Montgomery
Evan Culver