* Kill check processes after the timeout is reached
Kill the subprocess spawned by a script check once the timeout is reached. Previously Consul just marked the check critical and left the subprocess around.
Fixes#3565.
* Set err to non-nil when timeout occurs
* Fix check timeout test
* Kill entire process subtree on check timeout
* Add a docs note about windows subprocess termination
* agent: add option to discard health output
In high volatile environments consul will have checks with "noisy"
output which changes every time even though the status does not change.
Since the output is stored in the raft log every health check update
unblocks a blocking call on health checks since the raft index has
changed even though the status of the health checks may not have changed
at all. By discarding the output of the health checks the users can
choose a different tradeoff. Less visibility on why a check failed in
exchange for a reduced change rate on the raft log.
* agent: discard output also when adding a check
* agent: add test for discard check output
* agent: update docs
* go vet
* Adds discard_check_output to reloadable config table.
* Updates the change log.
* doc: document discrepancy between id and CheckID
* doc: document enable_tag_override change
* config: add TranslateKeys helper
TranslateKeys makes it easier to map between different representations
of internal structures. It allows to recursively map alias keys to
canonical keys in structured maps.
* config: use TranslateKeys for config file
This also adds support for 'enabletagoverride' and removes
the need for a separate CheckID alias field.
* config: remove dead code
* agent: use TranslateKeys for FixupCheckType
* agent: translate enable_tag_override during service registration
* doc: add '.hcl' as valid extension
* config: map ScriptArgs to args
* config: add comment for TranslateKeys
* Adds client-side retry for no leader errors.
This paves over the case where the client was connected to the leader
when it loses leadership.
* Adds a configurable server RPC drain time and a fail-fast path for RPCs.
When a server leaves it gets removed from the Raft configuration, so it will
never know who the new leader server ends up being. Without this we'd be
doomed to wait out the RPC hold timeout and then fail. This makes things fail
a little quicker while a sever is draining, and since we added a client retry
AND since the server doing this has already shut down and left the Serf LAN,
clients should retry against some other server.
* Makes the RPC hold timeout configurable.
* Reorders struct members.
* Sets the RPC hold timeout default for test servers.
* Bumps the leave drain time up to 5 seconds.
* Robustifies retries with a simpler client-side RPC hold.
* Reverts untended delete.
* Clean up handling of subprocesses and make using a shell optional
* Update docs for subprocess changes
* Fix tests for new subprocess behavior
* More cleanup of subprocesses
* Minor adjustments and cleanup for subprocess logic
* Makes the watch handler reload test use the new path.
* Adds check tests for new args path, and updates existing tests to use new path.
* Adds support for script args in Docker checks.
* Fixes the sanitize unit test.
* Adds panic for unknown watch type, and reverts back to Run().
* Adds shell option back to consul lock command.
* Adds shell option back to consul exec command.
* Adds shell back into consul watch command.
* Refactors signal forwarding and makes Windows-friendly.
* Adds a clarifying comment.
* Changes error wording to a warning.
* Scopes signals to interrupt and kill.
This avoids us trying to send SIGCHILD to the dead process.
* Adds an error for shell=false for consul exec.
* Adds notes about the deprecated script and handler fields.
* De-nests an if statement.
* config: provide stable config for /v1/agent/self (#3530)
This patch adds a stable subset of the previous Config struct to the
agent/self response. The actual runtime configuration is moved into
DebugConfig and will be documented to change.
Fixes#3530
* config: fix tests
* doc: update api documentation for /v1/agent/self
* Cleans up information about file extensions, now that they are required.
* Removes references to deprecated configuration options.
* Adds docs for multiple bind address support.
* metrics: replace statsite_prefix with service_prefix
The metrics prefix isn't statsite specific and is in fact used
for all metrics providers. Since we are deprecating fields
anyway we should fix this one as well.
Fixes#3293
* Updates docs and sorts telemetry section.
* Renames to "metrics_prefix" to disambiguate with Consul services.
* Updates the change log.
* agent: consolidate http method not allowed checks
This patch uses the error handling of the http handlers to handle HTTP
method not allowed errors across all available endpoints. It also adds a
test for testing whether the endpoints respond with the correct status
code.
* agent: do not panic on metrics tests
* agent: drop other tests for MethodNotAllowed
* agent: align /agent/join with reality
/agent/join uses PUT instead of GET as documented.
* agent: align /agent/check/{fail,warn,pass} with reality
/agent/check/{fail,warn,pass} uses PUT instead of GET as documented.
* fix some tests
* Drop more tests for method not allowed
* Align TestAgent_RegisterService_InvalidAddress with reality
* Changes API client join to use PUT instead of GET.
* Fixes agent endpoint verbs and removes obsolete tests.
* Updates the change log.
* Changes default Raft protocol to 3.
* Changes numPeers() to report only voters.
This should have been there before, but it's more obvious that this
is incorrect now that we default the Raft protocol to 3, which puts
new servers in a read-only state while Autopilot waits for them to
become healthy.
* Fixes TestLeader_RollRaftServer.
* Fixes TestOperator_RaftRemovePeerByAddress.
* Fixes TestServer_*.
Relaxed the check for a given number of voter peers and instead do
a thorough check that all servers see each other in their Raft
configurations.
* Fixes TestACL_*.
These now just check for Raft replication to be set up, and don't
care about the number of voter peers.
* Fixes TestOperator_Raft_ListPeers.
* Fixes TestAutopilot_CleanupDeadServerPeriodic.
* Fixes TestCatalog_ListNodes_ConsistentRead_Fail.
* Fixes TestLeader_ChangeServerID and adjusts the conn pool to throw away
sockets when it sees io.EOF.
* Changes version to 1.0.0 in the options doc.
* Makes metrics test more deterministic with autopilot metrics possible.
* new config parser for agent
This patch implements a new config parser for the consul agent which
makes the following changes to the previous implementation:
* add HCL support
* all configuration fragments in tests and for default config are
expressed as HCL fragments
* HCL fragments can be provided on the command line so that they
can eventually replace the command line flags.
* HCL/JSON fragments are parsed into a temporary Config structure
which can be merged using reflection (all values are pointers).
The existing merge logic of overwrite for values and append
for slices has been preserved.
* A single builder process generates a typed runtime configuration
for the agent.
The new implementation is more strict and fails in the builder process
if no valid runtime configuration can be generated. Therefore,
additional validations in other parts of the code should be removed.
The builder also pre-computes all required network addresses so that no
address/port magic should be required where the configuration is used
and should therefore be removed.
* Upgrade github.com/hashicorp/hcl to support int64
* improve error messages
* fix directory permission test
* Fix rtt test
* Fix ForceLeave test
* Skip performance test for now until we know what to do
* Update github.com/hashicorp/memberlist to update log prefix
* Make memberlist use the default logger
* improve config error handling
* do not fail on non-existing data-dir
* experiment with non-uniform timeouts to get a handle on stalled leader elections
* Run tests for packages separately to eliminate the spurious port conflicts
* refactor private address detection and unify approach for ipv4 and ipv6.
Fixes#2825
* do not allow unix sockets for DNS
* improve bind and advertise addr error handling
* go through builder using test coverage
* minimal update to the docs
* more coverage tests fixed
* more tests
* fix makefile
* cleanup
* fix port conflicts with external port server 'porter'
* stop test server on error
* do not run api test that change global ENV concurrently with the other tests
* Run remaining api tests concurrently
* no need for retry with the port number service
* monkey patch race condition in go-sockaddr until we understand why that fails
* monkey patch hcl decoder race condidtion until we understand why that fails
* monkey patch spurious errors in strings.EqualFold from here
* add test for hcl decoder race condition. Run with go test -parallel 128
* Increase timeout again
* cleanup
* don't log port allocations by default
* use base command arg parsing to format help output properly
* handle -dc deprecation case in Build
* switch autopilot.max_trailing_logs to int
* remove duplicate test case
* remove unused methods
* remove comments about flag/config value inconsistencies
* switch got and want around since the error message was misleading.
* Removes a stray debug log.
* Removes a stray newline in imports.
* Fixes TestACL_Version8.
* Runs go fmt.
* Adds a default case for unknown address types.
* Reoders and reformats some imports.
* Adds some comments and fixes typos.
* Reorders imports.
* add unix socket support for dns later
* drop all deprecated flags and arguments
* fix wrong field name
* remove stray node-id file
* drop unnecessary patch section in test
* drop duplicate test
* add test for LeaveOnTerm and SkipLeaveOnInt in client mode
* drop "bla" and add clarifying comment for the test
* split up tests to support enterprise/non-enterprise tests
* drop raft multiplier and derive values during build phase
* sanitize runtime config reflectively and add test
* detect invalid config fields
* fix tests with invalid config fields
* use different values for wan sanitiziation test
* drop recursor in favor of recursors
* allow dns_config.udp_answer_limit to be zero
* make sure tests run on machines with multiple ips
* Fix failing tests in a few more places by providing a bind address in the test
* Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder.
* Add porter to server_test.go to make tests there less flaky
* go fmt
* Updating maint.html to remove node maint
as discussed in #3268 maint mode does not have any affect on the node health.
* Update maint.html.markdown.erb
* Added rate limiting for agent RPC calls.
* Initializes the rate limiter based on the config.
* Adds the rate limiter into the snapshot RPC path.
* Adds unit tests for the RPC rate limiter.
* Groups the RPC limit parameters under "limits" in the config.
* Adds some documentation about the RPC limiter.
* Sends a 429 response when the rate limiter kicks in.
* Adds docs for new telemetry.
* Makes snapshot telemetry look like RPC telemetry and cleans up comments.
* Remove people from community section
This is going to be replaced with dynamic content from our CMS in the
future, but we agreed to remove it in the interim.
* Update deploy process
* Exit 2 if -child-exit-code and the child returned with an error.
* There is no platform independent way to check the exact return code of
* the child, so on error always return 2.
* Closes#947
* Closes#1503
* Update documentation for consul exec to mention all permissions it needs.
* Removed node write perm, not needed for consul exec
* Converts ACL note into a table like the API docs, adds ACL guide x-ref.
* Changes remote exec KV read to call GetTokenForAgent(), which can use
the acl_agent_token instead of the acl_token.
Fixes#3160.
* Fixes remote exec unit test with ACLs.
* Adds unhappy ACL path to unit tests for remote exec.
* Moves magic check and service constants into shared structs package.
* Removes the "consul" service from local state.
Since this service is added by the leader, it doesn't really make sense to
also keep it in local state (which requires special ACLs to configure), and
requires a bunch of special cases in the local state logic. This requires
fewer special cases and makes ACL bootstrapping cleaner.
* Makes coordinate update ACL log message a warning, similar to other AE warnings.
* Adds much more detailed examples for bootstrapping ACLs.
This can hopefully replace https://gist.github.com/slackpad/d89ce0e1cc0802c3c4f2d84932fa3234.
This patch adds an "http_config" object to the config file
and moves the "http_api_response_headers" option there.
"http_api_response_headers" is now deprecated in favor of
"http_config.response_headers"
Fix stale reads on server startup. Consistent reads will now wait for up to config.RPCHoldTimeout for the server to get past its raft log, before returning an error. Servers that are starting up will eventually catch up.
This fixes issue #2644
This patch adds support for a custom check id and name when
registering a service.
This is achieved by adding a CheckID and a Name field to the
CheckType structure which is used to register checks with a
service and when returning health check definitions.
CheckDefinition is a superset of CheckType which duplicates
some of the fields of CheckType. This patch decouples these
two structures by removing the embedding of CheckType in
CheckDefinition.
Fixes#3047
This patch stores the datacenter of a node in memdb
and exposes it via the API in all places where a Node
structure is returned.
* /catalog/nodes
* /catalog/node/:node
* /catalog/service/:service
* /health/service/:service
* /query/:uuid/execute
- Add various join options to bootstrapping guide
- Add note about Atlas deprecation to bootstrapping guide
- Add notes about -retry-join and retry_join to -join option
- Add notes about -retry-join and retry_join to start_join option
The "call to action" button at the bottom of the homepage is currently unclickable, since it has a negative top margin and is thus "hidden" behind the bottom margin of the terminal div above it. I opted to remove the negative top margin and instead diminish the bottom margin of the terminal div. This approach ends up adding a bit more padding between the "DNS Query Interface" h2 and the marketing div above it, but I think overall the look is in-line with the aesthetics of the page.
I'm fairly unfamiliar with HTML / CSS, so if there is a better way to do what I've done, I'd love to hear it. I've tested this in Chrome and Safari.
James Phillips
csawyerYumaed
Kyle Havlovitz
Frank Schröder
Radek Simko
Preetha Appan
Patrick Sodré
Patrick Sodré
Alex Dadgar
Ruslan Sennov
Michael Stewart
Mitsunori Komatsu
Kevin Fishner
phanidileep
David Terry
Brian Shumate
Kevin Bidwell
Seth Vargo
Nicolae Vlădescu
Elijah Caine
Jon Benson
Charlie Voiselle
wdevarshi
Seth Rutner
Chris Griggs
Stu Small
Ryon
Jason Martin
wojtkiewicz
Christoph Pageler
Scott Woods
Armon Dadgar
Katie Bayes
Michael Leow
Scott Pynn
Justin Walz
Rob Genova
Brian Shumate
Kostis Kapelonis
Jamie Kelly
rcgenova
Anders Daljord Morken
Patrick Winter
Kristiyan Nikolov
Nic Jackson
Seth Vargo
Dan O'Brien
mckennajones
Borys Pierov
captainill
Ben Fradet
Cihat Genc
Samuel Lopes