* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* Temporarily remove the secret type from resource generation
Previously, we'd begin a session with the xDS concurrency limiter
regardless of whether the proxy was registered in the catalog or in
the server's local agent state.
This caused problems for users who run `consul connect envoy` directly
against a server rather than a client agent, as the server's locally
registered proxies wouldn't be included in the limiter's capacity.
Now, the `ConfigSource` is responsible for beginning the session and we
only do so for services in the catalog.
Fixes: https://github.com/hashicorp/consul/issues/15753
* Protobuf Modernization
Remove direct usage of golang/protobuf in favor of google.golang.org/protobuf
Marshallers (protobuf and json) needed some changes to account for different APIs.
Moved to using the google.golang.org/protobuf/types/known/* for the well known types including replacing some custom Struct manipulation with whats available in the structpb well known type package.
This also updates our devtools script to install protoc-gen-go from the right location so that files it generates conform to the correct interfaces.
* Fix go-mod-tidy make target to work on all modules
Fixes a bug introduced by #15346 where we'd always require an ACL
token even if ACLs were disabled because we were erroneously
treating `nil` identity as anonymous.
Adds automation for generating the map of `gRPC Method Name → Rate Limit Type`
used by the middleware introduced in #15550, and will ensure we don't forget
to add new endpoints.
Engineers must annotate their RPCs in the proto file like so:
```
rpc Foo(FooRequest) returns (FooResponse) {
option (consul.internal.ratelimit.spec) = {
operation_type: READ,
};
}
```
When they run `make proto` a protoc plugin `protoc-gen-consul-rate-limit` will
be installed that writes rate-limit specs as a JSON array to a file called
`.ratelimit.tmp` (one per protobuf package/directory).
After running Buf, `make proto` will execute a post-process script that will
ingest all of the `.ratelimit.tmp` files and generate a Go file containing the
mappings in the `agent/grpc-middleware` package. In the enterprise repository,
it will write an additional file with the enterprise-only endpoints.
If an engineer forgets to add the annotation to a new RPC, the plugin will
return an error like so:
```
RPC Foo is missing rate-limit specification, fix it with:
import "proto-public/annotations/ratelimit/ratelimit.proto";
service Bar {
rpc Foo(...) returns (...) {
option (hashicorp.consul.internal.ratelimit.spec) = {
operation_type: OPERATION_READ | OPERATION_WRITE | OPERATION_EXEMPT,
};
}
}
```
In the future, this annotation can be extended to support rate-limit
category (e.g. KV vs Catalog) and to determine the retry policy.
Previously, these endpoints required `service:write` permission on _any_
service as a sort of proxy for "is the caller allowed to participate in
the mesh?".
Now, they're called as part of the process of establishing a server
connection by any consumer of the consul-server-connection-manager
library, which will include non-mesh workloads (e.g. Consul KV as a
storage backend for Vault) as well as ancillary components such as
consul-k8s' acl-init process, which likely won't have `service:write`
permission.
So this commit relaxes those requirements to accept *any* valid ACL token
on the following gRPC endpoints:
- `hashicorp.consul.dataplane.DataplaneService/GetSupportedDataplaneFeatures`
- `hashicorp.consul.serverdiscovery.ServerDiscoveryService/WatchServers`
- `hashicorp.consul.connectca.ConnectCAService/WatchRoots`
* Rate limiting handler - ensure configuration has changed before modifying limiters
* Updating test to validate arguments to UpdateConfig
* Removing duplicate test. Updating mock.
* Renaming NullRateLimiter to NullRequestLimitsHandler
* Rate Limit Handler - ensure rate limiting is not in the code path when not configured
* Update agent/consul/rate/handler.go
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* formatting handler.go
* Rate limiting handler - ensure configuration has changed before modifying limiters
* Updating test to validate arguments to UpdateConfig
* Removing duplicate test. Updating mock.
* adding logging for when UpdateConfig is called but the config has not changed.
* Update agent/consul/rate/handler.go
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* Update agent/consul/rate/handler_test.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* modifying existing variable name based on pr feedback
* updating a broken merge conflict;
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
* server: add placeholder glue for rate limit handler
This commit adds a no-op implementation of the rate-limit handler and
adds it to the `consul.Server` struct and setup code.
This allows us to start working on the net/rpc and gRPC interceptors and
config logic.
* Add handler errors
* Set the global read and write limits
* fixing multilimiter moving packages
* Fix typo
* Simplify globalLimit usage
* add multilimiter and tests
* exporting LimitedEntity
* Apply suggestions from code review
Co-authored-by: John Murret <john.murret@hashicorp.com>
* add config update and rename config params
* add doc string and split config
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* use timer to avoid go routine leak and change the interface
* add comments to tests
* fix failing test
* add prefix with config edge, refactor tests
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* refactor to apply configs for limiters under a prefix
* add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic
* make KeyType an exported type
* split the config and limiter trees to fix race conditions in config update
* rename variables
* fix race in test and remove dead code
* fix reconcile loop to not create a timer on each loop
* add extra benchmark tests and fix tests
* fix benchmark test to pass value to func
* server: add placeholder glue for rate limit handler
This commit adds a no-op implementation of the rate-limit handler and
adds it to the `consul.Server` struct and setup code.
This allows us to start working on the net/rpc and gRPC interceptors and
config logic.
* Set the global read and write limits
* fixing multilimiter moving packages
* add server configuration for global rate limiting.
* remove agent test
* remove added stuff from handler
* remove added stuff from multilimiter
* removing unnecessary TODOs
* Removing TODO comment from handler
* adding in defaulting to infinite
* add disabled status in there
* adding in documentation for disabled mode.
* make disabled the default.
* Add mock and agent test
* addig documentation and missing mock file.
* Fixing test TestLoad_IntegrationWithFlags
* updating docs based on PR feedback.
* Updating Request Limits mode to use int based on PR feedback.
* Adding RequestLimits struct so we have a nested struct in ReloadableConfig.
* fixing linting references
* Update agent/consul/rate/handler.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* Update agent/consul/config.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf
* added conversion function to convert request limits object to handler config.
* Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well.
* Updating values for TestLoad_FullConfig() so that they were different and discernable.
* Updating TestRuntimeConfig_Sanitize
* Fixing TestLoad_IntegrationWithFlags test
* putting nil check in place
* fixing rebase
* removing change for missing error checks. will put in another PR
* Rebasing after default multilimiter config change
* resolving rebase issues
* updating reference for incomingRPCLimiter to use interface
* updating interface
* Updating interfaces
* Fixing mock reference
Co-authored-by: Daniel Upton <daniel@floppy.co>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
Implements the gRPC middleware for rate-limiting as a tap.ServerInHandle
function (executed before the request is unmarshaled).
Mappings between gRPC methods and their operation type are generated by
a protoc plugin introduced by #15564.
During peer stream replication we flatten checks from the source cluster and build one thin overall check to hide the irrelevant details from the consuming cluster. This flattening logic did correctly flip to non-passing if there were any non-passing checks, but WHICH status it got during that was random (warn/error).
Also it didn't represent "maintenance" operations. There is an api package call AggregatedStatus which more correctly flattened check statuses.
This PR replicated the more complete logic into the peer stream package.
Previously, the MergeNodeServiceWithCentralConfig method accepted a
ServiceSpecificRequest argument, of which only the Datacenter and
QueryOptions fields were used.
Digging a little deeper, it turns out these fields were only passed
down to the ComputeResolvedServiceConfig method (through the
ServiceConfigRequest struct) which didn't actually use them.
As such, not all call-sites passed a valid ServiceSpecificRequest
so it's safer to remove the argument altogether to prevent future
changes from depending on it.
Re-add ServerExternalAddresses parameter in GenerateToken endpoint
This reverts commit 5e156772f6
and adds extra functionality to support newer peering behaviors.
* Backport agent tests.
Original commit: 0710b2d12fb51a29cedd1119b5fb086e5c71f632
Original commit: aaedb3c28bfe247266f21013d500147d8decb7cd (partial)
* Backport test fix and reduce flaky failures.
* Regenerate golden files.
* Backport from ENT: "Avoid race"
Original commit: 5006c8c858b0e332be95271ef9ba35122453315b
Original author: freddygv
* Backport from ENT: "chore: fix flake peerstream test"
Original commit: b74097e7135eca48cc289798c5739f9ef72c0cc8
Original author: DanStough
* peering: skip register duplicate node and check from the peer
* Prebuilt the nodes map and checks map to avoid repeated for loop
* use key type to struct: node id, service id, and check id
This commit adds a monotonically increasing nonce to include in peering
replication response messages. Every ack/nack from the peer handling a
response will include this nonce, allowing to correlate the ack/nack
with a specific resource.
At the moment nothing is done with the nonce when it is received. In the
future we may want to add functionality such as retries on NACKs,
depending on the class of error.
* Move stats.go from grpc-internal to grpc-middleware
* Update grpc server metrics with server type label
* Add stats test to grpc-external
* Remove global metrics instance from grpc server tests
This commit adds handling so that the replication stream considers
whether the user intends to peer through mesh gateways.
The subscription will return server or mesh gateway addresses depending
on the mesh configuration setting. These watches can be updated at
runtime by modifying the mesh config entry.
Nathan Coleman
skpratt
Dan Upton
Chris S. Kim
Dan Stough
Matt Keeler
John Murret
R.B. Boyer
Derek Menteer
malizz
Derek Menteer
cskh
Freddy
freddygv
Paul Glass
Eric Haberkorn
Chris Chapman