mirror of https://github.com/status-im/consul.git
9 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
John Cowen
|
32a619ae99 |
ui: Add tab navigation to the browser history/URLs (#7592)
* ui: Add tab navigation to the browser history/URLs
This commit changes all our tabbed UI interfaces in the catalog to use
actual URL changes rather than only updating the content in the page
using CSS.
Originally we had decided not to add tab clicks into the browser
history for a variety of reasons. As the UI has progressed these tabs
are a fairly common pattern we are using and as the UI grows and
stabilizes around certain UX patterns we've decided to make these tabs
'URL changing'.
Pros:
- Deeplinking
- Potentially smaller Route files with a more concentrated scope of the
contents of a tab rather than the entire page.
- Tab clicks now go into your history meaning backwards and forwards
buttons take you through the tabs not just the pages.
- The majority of our partials are now fully fledged templates (Octane
🎉)
Cons:
- Tab clicks now go into your history meaning backwards and forwards
buttons take you through the tabs not just the pages. (Could be good and
bad from a UX perspective)
- Many more Route and Controller files (yet as mentioned above each of these
have a more reduced scope)
- Moving around the contents of these tabs, or changing the visual names
of them means updates to the URL structure, which then should
potentially entail redirects, therefore what things that seem like
straightforwards design reorganizations are now a little more impactful.
It was getting to the point that the Pros outweight the Cons
Apart from moving some files around we made a few more tiny tweaks to
get this all working:
- Our freetext-filter component now performs the initial search rather
than this happening in the Controller (remove of the search method in
the Controllers and the new didInsertElement hook in the component)
- All of the <TabNav>'s were changed to use its alternative href
approach.
- <TabPanel>s usage was mostly removed. This is th thing I dislike the
most. I think this needs removing, but I'd also like to remove the HTML
it creates. You'll see that every new page is wrappe din the HTML for
the old <TabPanel>, this is to continue to use the same HTML structure
and id's as before to avoid making further changes to any CSS that might
use this and being able to target things during testing. We could have
also removed these here, but it would have meant a much larger changeset
and can just as easily be done at a later date.
- We made a new `tabgroup` page-object component, which is almost
identical to the previous `radiogroup` one and injected that instead
where needed during testing.
* Make sure we pick up indexed routes when nspaces are enabled
* Move session invalidation to the child (session) route
* Revert back to not using didInsertElement for updating the searching
This adds a way for the searchable to remember the last search result
instead, which changes less and stick to the previous method of
searching.
|
|
|
John Cowen
|
7044aa52c8 |
ui: Namespace Support (#6639)
Adds namespace support to the UI: 1. Namespace CRUD/management 2. Show Namespace in relevant areas (intentions, upstreams) 3. Main navigation bar improvements 4. Logic/integration to interact with a new `internal/acl/authorize` endpoint |
|
|
John Cowen
|
b3b32dc0f6
|
ui: UI Release Merge (ui-staging merge) (#6527)
## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. |
|
|
John Cowen
|
24847b169e |
ui: Leader icon for node listing view (#6265)
- yarn upgrade consul-api-double which includes `status/leader` - add all the ember-data things required to call a new endpoint - Pass the new leader variable through to the template - use the new leader variable in the template to set a leader - add acceptance testing to verify leaders are highlighted - Change testing navigation/api requests to status/leader (on the node listing page, status/leader is now the last get request to be called). - Template whitespace commit (less indenting) - adds a test to to assert no errors happen with an unelected leader |
|
|
John Cowen
|
a14a37a078 |
UI: Add support for blocking queries on the service instance detail page (#5487)
This commit includes several pieces of functionality to enable services to be removed and the page to present information that this has happened but also keep the deleted information on the page. Along with the more usual blocking query based listing. To enable this: 1. Implements `meta` on the model (only available on collections in ember) 2. Adds new `catchable` ComputedProperty alongside a `listen` helper for working with specific errors that can be thrown from EventSources in an ember-like way. Briefly, normal computed properties update when a property changes, EventSources can additionally throw errors so we can catch them and show different visuals based on that. Also: Add support for blocking queries on the service instance detail page 1. Previous we could return undefined when a service instance has no proxy, but this means we have nothing to attach `meta` to. We've changed this to return an almost empty object, so with only a meta property. At first glance there doesn't seem to be any way to provide a proxy object to templates and be able to detect whether it is actually null or not so we instead change some conditional logic in the templates to detect the property we are using to generate the anchor. 2. Made a `pauseUntil` test helper function for steps where we wait for things. This helps for DRYness but also means if we can move away from setInterval to something else later, we can do it in one place 3. Whilst running into point 1 here, we managed to make the blocking queries eternally loop. Whilst this is due to an error in the code and shouldn't ever happen whilst in actual use, we've added an extra check so that we only recur/loop the blocking query if the previous response has a `meta.cursor` Adds support for blocking queries on the node detail page (#5489) 1. Moves data re-shaping for the templates variables into a repository so they are easily covered by blocking queries (into coordinatesRepo) 2. The node API returns a 404 as signal for deregistration, we also close the sessions and coordinates blocking queries when this happens |
|
|
John Cowen
|
20e1a39aef | ui: remove call to super in setupController (#5383) | |
|
John Cowen
|
14aa90e309
|
ui: Move repo services to repository/ folder and standardize naming (#4694)
Repositories are a class of services to help with CRUD actions, most of the functionality is reused across various Models. This creates a new repository service that centralizes all this reused functionality. Inheritance via ember `Service.extend` is used as opposed to decorating via Mixins. 1. Move all repository services (and their tests) to a services/repository folder 2. Standardize on a singular name format 'node vs nodes' 3. Create a new 'repository' service to centralize functionality. This should be extended by 'repository' services |
|
|
John Cowen
|
40e71f1b91
|
UI: Simplify/refactor the actions/notification layer (#4572) + (#4573)
* Move notification texts to a slightly different layer (#4572) * Further Simplify/refactor the actions/notification layer (#4573) 1. Move the 'with-feedback' actions to a 'with-blocking-action' mixin which better describes what it does 2. Additional set of unit tests almost over the entire layer to prove things work/add confidence for further changes The multiple 'with-action' mixins used for every 'index/edit' combo are now reduced down to only contain the functionality related to their specific routes, i.e. where to redirect. The actual functionality to block and carry out the action and then notify are 'almost' split out so that their respective classes/objects do one thing and one thing 'well'. Mixins are chosen for the moment as the decoration approach used by mixins feels better than multiple levels of inheritence, but I would like to take this fuether in the future to a 'compositional' based approach. There is still possible further work to be done here, but I'm a lot happier now this is reduced down into separate parts. |
|
|
John Cowen
|
e5eeb0aa7c
|
UI V2 (#4086)
* Move settings to use the same service/route API as the rest of the app
* Put some ideas down for unit testing on adapters
* Favour `Model` over `Entity`
* Move away from using `reopen` to using Mixins
* Amend messages, comment/document some usage
* Make sure the returns are consistent in normalizePayload, also
Add some todo's in to remind me to think consider this further at a
later date. For example, is normalizePayload to be a hook or an
overridable method
* Start stripping back the HTML to semantics
* Use a variable rather than chaining
* Remove unused helpers
* Start picking through the new designs, start with listing pages
* First draft HTML for every page
* Making progress on the CSS
* Keep plugging away at the catalog css
* Looking at scrolling
* Wire up filtering
* Sort out filter counting, more or less done a few outstanding
* Start knocking the forms into shape
* Add in codemirror
* Keep moving forwards with the form like layouts
* Start looking at ACL editing page, add footer in
* Pull the filters back in, look at an autoresizer for scroll views
* First draft toggles
* 2nd draft healthcheck icons
* Tweak node healthcheck icons
* Looking at healthcheck detail icons
* Tweak the filter-bar and add selections to the in content tabs
* Add ACL create, pill-like acl type highlight
* Tweaking the main nav some more
* Working on the filter-bar and freetext-filter
* Masonry layout
* Stick with `checks` instead of healthy/unhealthy
* Fix up the filter numbers/counts
* Use the thead for a measure
* First draft tomography back in
* First draft DC dropdown
* Add a temporary create buttong to kv's
* Move KV and ACL to use a create page
* Move tags
* Run through old tests
* Injectable server
* Start adding test attributes
* Add some page objects
* More test attributes and pages
* Acl filter objects
* Add a page.. page object
* Clickable items in lists
* Add rest/spread babel plugin, remove mirage for now
* Add fix for ember-collection
* Keep track of acl filters
* ember-cli-page-object
* ember-test-selectors
* ui: update version of ui compile deps
* Update static assets
* Centralize radiogroup helper
* Rejig KV's and begin to clean it up
* Work around lack of Tags for the moment..
* Some little css tweaks and start to remove possibles
* Working on the dc page and incidentals
1. Sort the datacenter-picker list
2. Add a selected state to the datacenter-picker
3. Make dc an {Name: dc}
4. Add an env helper to get to 'env vars' from within templates
* Click outside stuff for the datacenter-picker, is-active on nav
* Make sure the dropdown CTA can be active
* Bump ember add pluralize helper
* Little try at sass based custom queries
* Rejig tablular collection so it deals with resizing, actions
1. WIP: start building actions dropdowns
2. Move tabular collection to deal with resizing to rule out differences
* First draft actions dropdowns
* Add ports, selectable IP's
* Flash messages, plus general cleanup/consistency
1. Add ember-cli-flash for flash messages
2. Move everything to get() instead of item.get
3. Spotted a few things that weren't consistent
* DOn't go lower than zero
* First draft vertical menu
* Missed a get, tweak dropmenu tick
* Big cleanup
1. this.get(), this.set() > get(), set()
2. assign > {...{}, ...{}}
3. Seperator > separator
* WIP: settings
* Moved things into a ui-v2 folder
* Decide on a way to do the settings page whilst maintaining the url + dc's
* Start some error pages
* Remove base64 polyfill
* Tie in settings, fix atob bug, tweak layout css
* Centralize confirmations into a component
* Allow switching between the old and new UI with the CONSUL_UI_BETA env var
Currently all the assets are packaged into a single AssetFS and a prefix is configured to switch between the two.
* Attempt at some updates to integrate the v2 ui build into the main infrastructure
* Add redirect to index.html for unknown paths
* Allow redictor to /index.html for new ui when using -ui-dir
* Take ACLs to the correct place on save
* First pass breadcrumbs
* Remove datacenter selector on the index page
* Tweak overall layout
* Make buttons 'resets'
* Tweak last DC stuff
* Validations plus kv keyname viewing tweaks
* Pull sessions back in
* Tweak the env vars to be more reusable
* Move isAnon to the view
* No items and disabled acl css
* ACL and KV details
1. Unauthorized page
2. Make sure the ACL is always selected when it needs it
3. Check record deletion with a changeset
* Few more acl tweaks/corrections
* Add no items view to node > services
* Tags for node > services
* Make sure we have tags
* Fix up the labels on the tomography graph
* Add node link (agent) to kv sessions
* Duplicate up `create` for KV 'root creation'
* Safety check for health checks
* Fix up the grids
* Truncate td a's, fix kv columns
* Watch for spaces in KV id's
* Move actions to their own mixins for now at least
* Link reset to settings incase I want to type it in
* Tweak error page
* Cleanup healthcheck icons in service listing
* Centralize errors and make getting back easier
* Nice numbers
* Compact buttons
* Some incidental css cleanups
* Use 'Key / Value' for root
* Tweak tomography layout
* Fix single healthcheck unhealthy resource
* Get loading screen ready
* Fix healthy healthcheck tick
* Everything in header starts white
* First draft loader
* Refactor the entire backend to use proper unique keys, plus..
1. Make unique keys form dc + slug (uid)
2. Fun with errors...
* Tweak header colors
* Add noopener noreferrer to external links
* Add supers to setupController
* Implement cloning, using ember-data...
* Move the more expensive down the switch order
* First draft empty record cleanup..
* Add the cusomt store test
* Temporarily use the htmlSafe prototype to remove the console warning
* Encode hashes in urls
* Go back to using title for errors for now
* Start removing unused bulma
* Lint
* WIP: Start looking at failing tests
* Remove single redirect test
* Finish off error message styling
* Add full ember-data cache invalidation to avoid stale data...
* Add uncolorable warning icons
* More info icon
* Rearrange single service, plus tag printing
* Logo
* No quotes
* Add a simple startup logo
* Tweak healthcheck statuses
* Fix border-color for healthchecks
* Tweak node tabs
* Catch 401 ACL errors and rethrow with the provided error message
* Remove old acl unauth and error routes
* Missed a super
* Make 'All' refer to number of checks, not services
* Remove ember-resizer, add autoprefixer
* Don't show tomography if its not worth it, viewify it more also
* Little model cleanup
* Chevrons
* Find a way to reliably set the class of html from the view
* Consistent html
* Make sure session id's are visible as long as possible
* Fix single service check count
* Add filters and searchs to the query string
* Don't remember the selected tab
* Change text
* Eror tweaking
* Use chevrons on all breadcrumbs even in kv's
* Clean up a file
* Tweak some messaging
* Makesure the footer overlays whats in the page
* Tweak KV errors
* Move json toggle over to the right
* feedback-dialog along with copy buttons
* Better confirmation dialogs
* Add git sha comment
* Same title as old UI
* Allow defaults
* Make sure value is a string
* WIP: Scrolling dropdowns/confirmations
* Add to kv's
* Remove set
* First pass trace
* Better table rows
* Pull over the hashi code editor styles
* Editor tweaks
* Responsive tabs
* Add number formatting to tomography
* Review whats left todo
* Lint
* Add a coordinate ember data triplet
* Bump in a v2.0.0
* Update old tests
* Get coverage working again
* Make sure query keys are also encoded
* Don't test console.error
* Unit test some more utils
* Tweak the size of the tabular collections
* Clean up gitignore
* Fix copy button rollovers
* Get healthcheck 'icon icons' onto the text baseline
* Tweak healthcheck padding and alignment
* Make sure commas kick in in rtt, probably never get to that
* Improve vertical menu
* Tweak dropdown active state to not have a bg
* Tweak paddings
* Search entire string not just 'startsWith'
* Button states
* Most buttons have 1px border
* More button tweaks
* You can only view kv folders
* CSS cleanup reduction
* Form input states and little cleanup
* More CSS reduction
* Sort checks by importance
* Fix click outside on datacenter picker
* Make sure table th's also auto calculate properly
* Make sure `json` isn't remembered in KV editing
* Fix recursive deletion in KV's
* Centralize size
* Catch updateRecord
* Don't double envode
* model > item consistency
* Action loading and ACL tweaks
* Add settings dependencies to acl tests
* Better loading
* utf-8 base64 encode/decode
* Don't hang off a prototype for htmlSafe
* Missing base64 files...
* Get atob/btoa polyfill right
* Shadowy rollovers
* Disabled button styling for primaries
* autofocuses only onload for now
* Fix footer centering
* Beginning of 'notices'
* Remove the isLocked disabling as we are letting you do what the API does
* Don't forget the documentation link for sessions
* Updates are more likely
* Use exported constant
* Dont export redirectFS and a few other PR updates
* Remove the old bootstrap config which was used for the old UI skin
* Use curlies for multiple properties
|