Update CA provider docs
Clarify that providers can differ between
primary and secondary datacenters
Provide a comparison chart for consul vs
vault CA providers
Loosen Vault CA provider validation for RootPKIPath
Update Vault CA provider documentation
When using vault as a CA and generating the local signing cert, try to
enable the PKI endpoint's auto-tidy feature with it set to tidy expired
issuers.
* Rename Intermediate cert references to LeafSigningCert
Within the Consul CA subsystem, the term "Intermediate"
is confusing because the meaning changes depending on
provider and datacenter (primary vs secondary). For
example, when using the Consul CA the "ActiveIntermediate"
may return the root certificate in a primary datacenter.
At a high level, we are interested in knowing which
CA is responsible for signing leaf certs, regardless of
its position in a certificate chain. This rename makes
the intent clearer.
* Move provider state check earlier
* Remove calls to GenerateLeafSigningCert
GenerateLeafSigningCert (formerly known
as GenerateIntermediate) is vestigial in
non-Vault providers, as it simply returns
the root certificate in primary
datacenters.
By folding Vault's intermediate cert logic
into `GenerateRoot` we can encapsulate
the intermediate cert handling within
`newCARoot`.
* Move GenerateLeafSigningCert out of PrimaryProvidder
Now that the Vault Provider calls
GenerateLeafSigningCert within
GenerateRoot, we can remove the method
from all other providers that never
used it in a meaningful way.
* Add test for IntermediatePEM
* Rename GenerateRoot to GenerateCAChain
"Root" was being overloaded in the Consul CA
context, as different providers and configs
resulted in a single root certificate or
a chain originating from an external trusted
CA. Since the Vault provider also generates
intermediates, it seems more accurate to
call this a CAChain.
Add support for using existing vault auto-auth configurations as the
provider configuration when using Vault's CA provider with AliCloud.
AliCloud requires 2 extra fields to enable it to use STS (it's preferred
auth setup). Our vault-plugin-auth-alicloud package contained a method
to help generate them as they require you to make an http call to
a faked endpoint proxy to get them (url and headers base64 encoded).
Adds support for the approle auth-method. Only handles using the approle
role/secret to auth and it doesn't support the agent's extra management
configuration options (wrap and delete after read) as they are not
required as part of the auth (ie. they are vault agent things).
Adds support for a jwt token in a file. Simply reads the file and sends
the read in jwt along to the vault login.
It also supports a legacy mode with the jwt string being passed
directly. In which case the path is made optional.
Does the required dance with the local HTTP endpoint to get the required
data for the jwt based auth setup in Azure. Keeps support for 'legacy'
mode where all login data is passed on via the auth methods parameters.
Refactored check for hardcoded /login fields.
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* [API Gateway] Add integration test for HTTP routes
remove redundant vault api retry logic
We upgraded Vault API module version to a version that has built-in
retry logic. So this code is no longer necessary.
Also add mention of re-configuring the provider in comments.
fix goroutine leak in renew testing
Test overwrote the stopWatcher() function variable for the test without
keeping and calling the original value. The original value is the
function that stops the goroutine... so it needs to be called.
Previously, we'd begin a session with the xDS concurrency limiter
regardless of whether the proxy was registered in the catalog or in
the server's local agent state.
This caused problems for users who run `consul connect envoy` directly
against a server rather than a client agent, as the server's locally
registered proxies wouldn't be included in the limiter's capacity.
Now, the `ConfigSource` is responsible for beginning the session and we
only do so for services in the catalog.
Fixes: https://github.com/hashicorp/consul/issues/15753
It turns out that by default the dev mode vault server will attempt to interact with the
filesystem to store the provided root token. If multiple vault instances are running
they'll all awkwardly share the filesystem and if timing results in one server stopping
while another one is starting then the starting one will error with:
Error initializing Dev mode: rename /home/circleci/.vault-token.tmp /home/circleci/.vault-token: no such file or directory
This change uses `-dev-no-store-token` to bypass that source of flakes. Also the
stdout/stderr from the vault process is included if the test fails.
The introduction of more `t.Parallel` use in https://github.com/hashicorp/consul/pull/15669
increased the likelihood of this failure, but any of the tests with multiple vaults in use
(or running multiple package tests in parallel that all use vault) were eventually going
to flake on this.
All of the current integration tests where Vault is the Connect CA now use non-root tokens for the test. This helps us detect privilege changes in the vault model so we can keep our guides up to date.
One larger change was that the RenewIntermediate function got refactored slightly so it could be used from a test, rather than the large duplicated function we were testing in a test which seemed error prone.
The fix outlined and merged in #15253 fixed the issue as it occurs in the primary
DC. There is a similar issue that arises when vault is used as the Connect CA in a
secondary datacenter that is fixed by this PR.
Additionally: this PR adds support to run the existing suite of vault related integration
tests against the last 4 versions of vault (1.9, 1.10, 1.11, 1.12)
Consul used to rely on implicit issuer selection when calling Vault endpoints to issue new CSRs. Vault 1.11+ changed that behavior, which caused Consul to check the wrong (previous) issuer when renewing its Intermediate CA. This patch allows Consul to explicitly set a default issuer when it detects that the response from Vault is 1.11+.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* connect: strip port from DNS SANs for ingress gateway leaf cert
* connect: format DNS SANs in CreateCSR
* connect: Test wildcard case when formatting SANs
* update go version to 1.18 for api and sdk, go mod tidy
* removes ioutil usage everywhere which was deprecated in go1.16 in favour of io and os packages. Also introduces a lint rule which forbids use of ioutil going forward.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
A previous commit introduced an internally-managed server certificate
to use for peering-related purposes.
Now the peering token has been updated to match that behavior:
- The server name matches the structure of the server cert
- The CA PEMs correspond to the Connect CA
Note that if Conect is disabled, and by extension the Connect CA, we
fall back to the previous behavior of returning the manually configured
certs and local server SNI.
Several tests were updated to use the gRPC TLS port since they enable
Connect by default. This means that the peering token will embed the
Connect CA, and the dialer will expect a TLS listener.
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
By adding a SpiffeID for server agents, servers can now request a leaf
certificate from the Connect CA.
This new Spiffe ID has a key property: servers are identified by their
datacenter name and trust domain. All servers that share these
attributes will share a ServerURI.
The aim is to use these certificates to verify the server name of ANY
server in a Consul datacenter.
This is only configured in xDS when a service with an L7 protocol is
exported.
They also load any relevant trust bundles for the peered services to
eventually use for L7 SPIFFE validation during mTLS termination.
When converting from Consul intentions to xds RBAC rules, services imported from other peers must encode additional data like partition (from the remote cluster) and trust domain.
This PR updates the PeeringTrustBundle to hold the sending side's local partition as ExportedPartition. It also updates RBAC code to encode SpiffeIDs of imported services with the ExportedPartition and TrustDomain.
For mTLS to work between two proxies in peered clusters with different root CAs,
proxies need to configure their outbound listener to use different root certificates
for validation.
Up until peering was introduced proxies would only ever use one set of root certificates
to validate all mesh traffic, both inbound and outbound. Now an upstream proxy
may have a leaf certificate signed by a CA that's different from the dialing proxy's.
This PR makes changes to proxycfg and xds so that the upstream TLS validation
uses different root certificates depending on which cluster is being dialed.
The importing peer will need to know what SNI and SPIFFE name
corresponds to each exported service. Additionally it will need to know
at a high level the protocol in use (L4/L7) to generate the appropriate
connection pool and local metrics.
For replicated connect synthetic entities we edit the `Connect{}` part
of a `NodeService` to have a new section:
{
"PeerMeta": {
"SNI": [
"web.default.default.owt.external.183150d5-1033-3672-c426-c29205a576b8.consul"
],
"SpiffeID": [
"spiffe://183150d5-1033-3672-c426-c29205a576b8.consul/ns/default/dc/dc1/svc/web"
],
"Protocol": "tcp"
}
}
This data is then replicated and saved as-is at the importing side. Both
SNI and SpiffeID are slices for now until I can be sure we don't need
them for how mesh gateways will ultimately work.
* Support vault namespaces in connect CA
Follow on to some missed items from #12655
From an internal ticket "Support standard "Vault namespace in the
path" semantics for Connect Vault CA Provider"
Vault allows the namespace to be specified as a prefix in the path of
a PKI definition, but our usage of the Vault API includes calls that
don't support a namespaced key. In particular the sys.* family of
calls simply appends the key, instead of prefixing the namespace in
front of the path.
Unfortunately it is difficult to reliably parse a path with a
namespace; only vault knows what namespaces are present, and the '/'
separator can be inside a key name, as well as separating path
elements. This is in use in the wild; for example
'dc1/intermediate-key' is a relatively common naming schema.
Instead we add two new fields: RootPKINamespace and
IntermediatePKINamespace, which are the absolute namespace paths
'prefixed' in front of the respective PKI Paths.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
Introduces a gRPC endpoint for signing Connect leaf certificates. It's also
the first of the public gRPC endpoints to perform leader-forwarding, so
establishes the pattern of forwarding over the multiplexed internal RPC port.
* Avoid doing list of /sys/mounts
From an internal ticket "Support standard "Vault namespace in the path" semantics for Connect Vault CA Provider"
Vault allows the namespace to be specified as a prefix in the path of
a PKI definition, but this doesn't currently work for
```IntermediatePKIPath``` specifications, because we attempt to list
all of the paths to check if ours is already defined. This doesn't
really work in a namespaced world.
This changes the IntermediatePKIPath code to follow the same pattern
as the root key, where we directly get the key rather than listing.
This code is difficult to write automated tests for because it relies
on features of Vault Enterprise, which isn't currently part of our
test framework, so it was tested manually.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* add changelog
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Fix leaked Vault LifetimeRenewers
When the Vault CA Provider is reconfigured we do not stop the
LifetimeRenewers which can cause them to leak until the Consul processes
recycles. On Configure execute stopWatcher if it exists and is not nil
before starting a new renewal
* Add jitter before restarting the LifetimeWatcher
If we fail to login to Vault or our token is no longer valid we can
overwhelm a Vault instance with many requests very quickly by restarting
the LifetimeWatcher. Before restarting the LifetimeWatcher provide a
backoff time of 1 second or less.
* Use a retry.Waiter instead of RandomStagger
* changelog
* gofmt'd
* Swap out bool for atomic.Unit32 in test
* Provide some extra clarification in comment and changelog
* mogify needed pbcommon structs
* mogify needed pbconnect structs
* fix compilation errors and make config_translate_test pass
* add missing file
* remove redundant oss func declaration
* fix EnterpriseMeta to copy the right data for enterprise
* rename pbcommon package to pbcommongogo
* regenerate proto and mog files
* add missing mog files
* add pbcommon package
* pbcommon no mog
* fix enterprise meta code generation
* fix enterprise meta code generation (pbcommongogo)
* fix mog generation for gogo
* use `protoc-go-inject-tag` to inject tags
* rename proto package
* pbcommon no mog
* use `protoc-go-inject-tag` to inject tags
* add non gogo proto to make file
* fix proto get
Previously we were using two different criteria to decide where to run a
test. The main `go-test` job would skip Vault tests based on the
presence of the `vault` binary, but the `test-connect-ca-providers` job
would run tests based on the name.
This led to a scenario where a test may never run in CI.
To fix this problem I added a name check to the function we use to skip
the test. This should ensure that any test that requires vault is named
correctly to be run as part of the `test-connect-ca-providers` job.
At the same time I relaxed the regex we use. I verified this runs the
same tests using `go test --list Vault`. I made this change because a
bunch of tests in `agent/connect/ca` used `Vault` in the name, without
the underscores. Instead of changing a bunch of test names, this seemed
easier.
With this approach, the worst case is that we run a few extra tests in
the `test-connect-ca-providers` job, which doesn't seem like a problem.
Tom Davies
Chris S. Kim
John Eikenberry
Eric Haberkorn
John Murret
Ronald
Andrew Stucki
Chris Thain
Dan Upton
Semir Patel
R.B. Boyer
Alexander Scheel
Kyle Havlovitz
Kyle Schochenmaier
freddygv
Freddy
Mark Anderson
Connor
Dhia Ayachi
Daniel Nephin