* Add components for KV form, KV list and Session form
* Pass through a @label attribute for a human label + don't require error
* Ignore transition aborted errors for if you are re-transitioning
* Make old confirmation dialog more ember-like and tagless
* Make sure data-source and data-sink supports KV and sessions
* Use new components and delete all the things
* Fix up tests
* Make list component tagless
* Add component pageobject and fixup tests from that
* Add eslint warning back in
* ui: Reduce discovery-chain log spam
Currently the only way that the UI can know whether connect is enabled
or not is whether we get 500 errors from certain endpoints.
One of these endpoints we already use, so aswell as recovering from a
500 error, we also remember that connect is disabled for the rest of the
page 'session' (so until the page is refreshed), and make no further
http requests to the endpoint for that specific datacenter.
This means that log spam is reduced to only 1 log per page refresh/dc
instead of 1 log per service navigation.
Longer term we'll need some way to dynamically discover whether connect
is enabled per datacenter without relying on something that will add
error logs to consul.
When using namespaces, the 'default' namespace is a little special in
that we wanted the option for all our URLs to stay the same when using
namespaces if you are using the default namespace, with the option of
also being able to explicitly specify `~default` as a namespace.
In other words both `ui/services/service-name` and
`ui/~default/services/service-name` show the same thing.
This means that if you switch between OSS and Enterprise, all of your
URLs stay the same, but you can still specifically link to the default
namespace itself.
Our routing configuration is duplicated in order to achieve this:
```
- :dc
- :service
- :kv
- :edit
- :nspace
- :dc
- :service
- :kv
- :edit
```
Secondly, ember routing resolves/matches routes in the order that you specify
them, unless, its seems, when using wildcard routes, like we do in the
KV area.
When not using the wildcard routes the above routing configuration
resolves/matches a `/dc-1/kv/service` to the `dc.kv.edit` route correctly
(dc:dc-1, kv:services), that route having been configured in a higher
priority than the nspace routes.
However when configured with wildcards (required in the KV area), note
the asterisk below:
```
- :dc
:service
- :kv
- *edit
- :nspace
- :dc
- :service
- :kv
- *edit
```
Given something like `/dc-1/kv/services` the router instead matches the
`nspace.dc.service` (nspace:dc-1, dc:kv, service:services) route first even
though the `dc.kv.edit` route should still match first.
Changing the `dc.kv.edit` route back to use a non-wildcard route
(:edit instead of *edit), returns the router to match the routes in the
correct order.
In order to work around this, we catch any incorrectly matched routes
(those being directed to the nspace Route but not having a `~`
character in the nspace parameter), and then recalculate the correct
route name and parameters. Lastly we use this recalculated route to
direct the user/app to the correct route.
This route recalcation requires walking up the route to gather up all of
the required route parameters, and although this feels like something
that could already exist in ember, it doesn't seem to. We had already
done a lot of this work a while ago when implementing our `href-mut`
helper. This commit therefore repurposes that work slighlty and externalizes
it outside of the helper itself into a more usable util so we can import
it where we need it. Tests have been added before refactoring it down
to make the code easier to follow.
* ui: always pass KV flags through on update
* ui: Integration test to prove the flags queryParams gets passed through
* ui: Add Flags to the KV updating acceptance tests
* ui: Acceptance test improvements to prepare for more NS tests
* ui: Namespace acceptance testing (#7005)
* Update api-double and consul-api-double for http.body
* Adds places where we missed passing the nspace through
* Hardcode nspace CRUD to use the default nspace for policies and roles
* Alter test helpers to allow us to control nspaces from the outside
* Amends to allow tests to account for namespace, move ns from queryParam
1. We decided to move how we pass the namespace value through to the
backend when performing write actions (create, update). Previoulsy we
were using the queryParam although using the post body is the preferred
method to send the Namespace details through to the backend.
2. Other various amends to take into account testing across multiple
namespaced scenarios
* Enable nspace testing by default
* Remove last few occurances of old style http assertions
We had informally 'deprecated' our old style of http assertions that
relied on the order of http calls (even though that order was not
important for the assertion). Following on from our namespace work we
removed the majority of the old occrances of these old style assertions.
This commit removes the remaining few, and also then cleans up the
assertions/http.js file to only include the ones we are using.
This reduces our available step count further and prevents any confusion
over the usage of the old types and the new types.
* ui: Namespace CRUD acceptance tests (#7016)
* Upgrade consul-api-double
* Add all the things required for testing:
1. edit and index page objects
2. enable CONSUL_NSPACE_COUNT cookie setting
3. enable mutating HTTP response bodies based on URL
* Add acceptance test for nspace edit/delete/list and searching
Adds namespace support to the UI:
1. Namespace CRUD/management
2. Show Namespace in relevant areas (intentions, upstreams)
3. Main navigation bar improvements
4. Logic/integration to interact with a new `internal/acl/authorize` endpoint
In 858b05fc31 (diff-46ef88aa04507fb9b039344277531584)
we removed encoding values in pathnames as we thought they were
eventually being encoded by `ember`. It looks like this isn't the case.
Turns out sometimes they are encoded sometimes they aren't. It's complicated.
If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206.
It's related to the difference between `dynamic` routes and `wildcard` routes.
Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service
Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding.
Where I mention 'conditionally' below, this is detection is what is used for the decision.
We conditionally add url encoding to the `{{href-to}}` helper/addon. The
reasoning here is, if we are asking for a 'href/url' then whatever we
receive back should always be urlencoded. We've done this by reusing as much
code from the original `ember-href-to` addon as possible, after this
change every call to the `{{href-to}}` helper will be urlencoded.
As all links using `{{href-to}}` are now properly urlencoded. We also
need to decode them in the correct place 'on the other end', so..
We also override the default `Route.paramsFor` method to conditionally decode all
params before passing them to the `Route.model` hook.
Lastly (the revert), as we almost consistently use url params to
construct API calls, we make sure we re-encode any slugs that have been
passed in by the user/developer. The original API for the `createURL`
function was to allow you to pass values that didn't need encoding,
values that **did** need encoding, followed by query params (which again
require url encoding)
All in all this should make the entire ember app url encode/decode safe.
Having the code editor on removes the text area from the DOM, making it
more difficult to enter text in the text editor during testing. This
turns the code editor off whilst making edits during testing.
No changes to UI code
* Move notification texts to a slightly different layer (#4572)
* Further Simplify/refactor the actions/notification layer (#4573)
1. Move the 'with-feedback' actions to a 'with-blocking-action' mixin
which better describes what it does
2. Additional set of unit tests almost over the entire layer to prove
things work/add confidence for further changes
The multiple 'with-action' mixins used for every 'index/edit' combo are
now reduced down to only contain the functionality related to their
specific routes, i.e. where to redirect.
The actual functionality to block and carry out the action and then
notify are 'almost' split out so that their respective classes/objects do
one thing and one thing 'well'.
Mixins are chosen for the moment as the decoration approach used by
mixins feels better than multiple levels of inheritence, but I would
like to take this fuether in the future to a 'compositional' based
approach.
There is still possible further work to be done here, but I'm a lot
happier now this is reduced down into separate parts.
We now essentially do 2 redirects if you hit a `folder/`
1. If you visit `/ui/dc1/kv/folder/`, `consul` will redirect you to `/ui/dc1/kv/folder`
2. Once redirected to `/ui/dc1/kv/folder` via a 301, use ember/history
API to redirect you back to `/ui/dc1/kv/folder/`.
Bit long winded, but achieves what we want without having to get stuck
into `consul` itself to remove the 301 for the UI
This enables people to enter things using the mouse to paste for
example, plus possible other things.
As an aside it also answers my query regarding `fillIn` for testing,
nothing needs to be actually _typed_ anymore! Doh
John Cowen
Kenia
John Cowen