* ui: Ensure we use nonEmptySet everywhere where we add Namespace
We missed a coupld of places where we use the noEmptySet function, which
will only perform the set if the specified property is non-empty.
Currently we aren't certain there is a place in OSS where a Namespace
can make its way down via the API and endup being PUT/POSTed back out
again when saved. If this did ever happen we would assume it would be
the default namespace, but we add an extra check here to ensure we never
PUT/POST the Namespace property if Namespaces are disabled.
* ui: Add step/assertion for assert if a property is NOT set in the body
* ui: Improve updated/create acc testing for policy/token/roles:
Including making sure a Namespace property is never sent through if you
are running without namespace support
* ui: Make API integration tests aware of CONSUL_NSPACES_ENABLED
* ui: Allow passing CONSUL_NSPACES_ENABLED in via the cli in ember
* ui: Add more makefile targets/package scripts to switch NSPACEs on/off
* ui: Ensure all acceptance tests continue to pass with NSPACEs on/off
This required a little tweaking of the dictionary, at some point
page-navigation and some of these little tweaks will no longer be
required
* ui: Try running CI frontend tests in two parellel runs oss/ent
* ui: Use correct make target, use different names for the reports
When editing Nspaces, although you can assign policies to a nspace using
PolicyDefaults you cannot assign a Service Identity to a policy like you
can when adding a policy to a token.
This commit adds an extra attribute to our policy-form/policy-selector
component so you can disable this setting. At a later date we may change
this to have a conficgurable `<Slot />` instead.
Simple acceptance tests is included here
* ui: Acceptance test improvements to prepare for more NS tests
* ui: Namespace acceptance testing (#7005)
* Update api-double and consul-api-double for http.body
* Adds places where we missed passing the nspace through
* Hardcode nspace CRUD to use the default nspace for policies and roles
* Alter test helpers to allow us to control nspaces from the outside
* Amends to allow tests to account for namespace, move ns from queryParam
1. We decided to move how we pass the namespace value through to the
backend when performing write actions (create, update). Previoulsy we
were using the queryParam although using the post body is the preferred
method to send the Namespace details through to the backend.
2. Other various amends to take into account testing across multiple
namespaced scenarios
* Enable nspace testing by default
* Remove last few occurances of old style http assertions
We had informally 'deprecated' our old style of http assertions that
relied on the order of http calls (even though that order was not
important for the assertion). Following on from our namespace work we
removed the majority of the old occrances of these old style assertions.
This commit removes the remaining few, and also then cleans up the
assertions/http.js file to only include the ones we are using.
This reduces our available step count further and prevents any confusion
over the usage of the old types and the new types.
* ui: Namespace CRUD acceptance tests (#7016)
* Upgrade consul-api-double
* Add all the things required for testing:
1. edit and index page objects
2. enable CONSUL_NSPACE_COUNT cookie setting
3. enable mutating HTTP response bodies based on URL
* Add acceptance test for nspace edit/delete/list and searching
Adds namespace support to the UI:
1. Namespace CRUD/management
2. Show Namespace in relevant areas (intentions, upstreams)
3. Main navigation bar improvements
4. Logic/integration to interact with a new `internal/acl/authorize` endpoint
## HTTPAdapter (#5637)
## Ember upgrade 2.18 > 3.12 (#6448)
### Proxies can no longer get away with not calling _super
This means that we can't use create anymore to define dynamic methods.
Therefore we dynamically make 2 extended Proxies on demand, and then
create from those. Therefore we can call _super in the init method of
the extended Proxies.
### We aren't allowed to reset a service anymore
We never actually need to now anyway, this is a remnant of the refactor
from browser based confirmations. We fix it as simply as possible here
but will revisit and remove the old browser confirm functionality at a
later date
### Revert classes to use ES5 style to workaround babel transp. probs
Using a mixture of ES6 classes (and hence super) and arrow functions
means that when babel transpiles the arrow functions down to ES5, a
reference to this is moved before the call to super, hence causing a js
error.
Furthermore, we the testing environment no longer lets use use
apply/call on the constructor.
These errors only manifests during testing (only in the testing
environment), the application itself runs fine with no problems without
this change.
Using ES5 style class definitions give us freedom to do all of the above
without causing any errors, so we reverted these classes back to ES5
class definitions
### Skip test that seems to have changed due to a change in RSVP timing
This test tests a usecase/area of the API that will probably never ever
be used, it was more testing out the API. We've skipped the test for now
as this doesn't affect the application itself, but left a note to come
back here later to investigate further
### Remove enumerableContentDidChange
Initial testing looks like we don't need to call this function anymore,
the function no longer exists
### Rework Changeset.isSaving to take into account new ember APIs
Setting/hanging a computedProperty of an instantiated object no longer
works. Move to setting it on the prototype/class definition instead
### Change how we detect whether something requires listening
New ember API's have changed how you can detect whether something is a
computedProperty or not. It's not immediately clear if its even possible
now. Therefore we change how we detect whether something should be
listened to or not by just looking for presence of `addEventListener`
### Potentially temporary change of ci test scripts to ensure deps exist
All our tooling scripts run through a Makefile (for people familiar with
only using those), which then call yarn scripts which can be called
independently (for people familar with only using yarn).
The Makefile targets always check to make sure all the dependencies are
installed before running anything that requires them (building, testing
etc).
The CI scripts/targets didn't follow this same route and called the yarn
scripts directly (usually CI builds a cache of the dependencies first).
For some reason this cache isn't doing what it usually does, and it
looks as though, in CI, ember isn't installed.
This commit makes the CI scripts consistently use the same method as all
of the other tooling scripts (Makefile target > Install Deps if
required > call yarn script). This should install the dependencies if
for some reason the CI cache building doesn't complete/isn't successful.
Potentially this commit may be reverted if, the root of the problem is
elsewhere, although consistency is always good, so it might be a good
idea to leave this commit as is even if we need to debug and fix things
elsewhere.
### Make test-parallel consistent with the rest of the tooling scripts
As we are here making changes for CI purposes (making test-ci
consistent), we spotted that test-parallel is also inconsistent and also
the README manual instructions won't work without `ember` installed
globally.
This commit makes everything consistent and changes the manual
instructions to use the local ember instance that gets installed via
yarn
### Re-wrangle catchable to fit with new ember 3.12 APIs
In the upgrade from ember 3.8 > 3.12 the public interfaces for
ComputedProperties have changed slightly. `meta` is no longer a public
property of ComputedProperty but of a ComputedDecoratorImpl mixin
instead.
7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725)
There seems to be no way, by just using publically available
methods, to replicate this behaviour so that we can create our own
'ComputedProperty` factory via injecting the ComputedProperty class as
we did previously.
3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18)
Instead we dynamically hang our `Catchable` `catch` method off the
instantiated ComputedProperty. In doing it like this `ComputedProperty`
has already has its `meta` method mixed in so we don't have to manually
mix it in ourselves (which doesn't seem possible)
This functionality is only used during our work in trying to ensure
our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e.
using the traditional Route.model hooks and ember-like Controller
properties). Our ongoing/upcoming work on a componentized approach to
data a.k.a `<DataSource />` means we will be able to remove the majority
of the code involved here now that it seems to be under an amount of
flux in ember.
### Build bindata_assetfs.go with new UI changes
1. All {{ivy-codemirror}} components need 'refreshing' when they become
visible via our own `didAppear` method on the `{{code-editor}}`
component
(also see:)
- https://github.com/hashicorp/consul/pull/4190#discussion_r193270223
- 73db111db8 (r225264296)
2. On initial investigation, it looks like the component we are using
for the code editor doesn't distinguish between setting its `value`
programatically and a `keyup` event, i.e. an interaction from the user.
We currently pretend that whenever its `value` changes, it is a `keyup`
event. This means that when we reset the `value` to `""`
programmatically for form resetting purposes, a 'pretend keyup' event
would also be fired, which would in turn kick off the validation, which
would fail and show an error message for empty values in other fields of
the form - something that is perfectly valid if you haven't typed
anything yet. We solved this by checking for `isPristine` on fields that
are allowed to be empty before you have typed anything.
Previously we were creating a fake event and amending the name of the
fake event, this meant that other `event.target` properties weren't
being passed through (in this instance `checked`) this changes the
approach to not use fake events, and allows you to overwrite the name
that the form uses for `handleEvent`
Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required.
Also includes refinements/improvements for easier testing of deeply nested components.
1. ember-data adapter/serializer/model triplet for Roles
2. repository, form/validations and searching filter for Roles
3. Moves potentially, repeated, or soon to to repeated functionality
into a mixin (mainly for 'many policy' relationships)
4. A few styling tweaks for little edge cases around roles
5. Router additions, Route, Controller and templates for Roles
Also see:
* UI: ACL Roles cont. plus Service Identities (#5661 and #5720)
In order to continue supporting the legacy ACL system, we replace
the 500 error from a non-existent `self` endpoint with a response of a
`null` `AccessorID` - which makes sense (a null AccessorID means old
API)
We then redirect the user to the old ACL pages which then gives a 403
if their token was wrong which then redirects them back to the login page.
Due to the multiple redirects and not wanting to test the validity of the token
before redirecting (thus calling the same API endpoint twice), it is not
straightforwards to turn the 'faked' response from the `self` endpoint
into an error (flash messages are 'lost' through multiple redirects).
In order to make this a slightly better experience, you can now return a
`false` during execution of an action requiring success/failure
feedback, this essentially skips the notification, so if the action is
'successful' but you don't want to show the notification, you can. This
resolves showing a successful notification when the `self` endpoint
response is faked. The last part of the puzzle is to make sure that the
global 403 catching error in the application Route also produces an
erroneous notification.
Please note this can only happen with a ui client using the new ACL
system when communicating with a cluster using the old ACL system, and
only when you enter the wrong token.
Lastly, further acceptance tests have been added around this
This commit also adds functionality to avoid any possible double
notification messages, to avoid UI overlapping
In some circumstances a consul 1.4 client could be running in an
un-upgraded 1.3 or lower cluster. Currently this gives a 500 error on
the new ACL token endpoint. Here we catch this specific 500 error/message
and set the users AccessorID to null. Elsewhere in the frontend we use
this fact (AccessorID being null) to decide whether to present the
legacy or the new ACL UI to the user.
Also:
- Re-adds in most of the old style ACL acceptance tests, now that we are keeping the old style UI
- Restricts code editors to HCL only mode for all `Rules` editing (legacy/'half legacy'/new style)
- Adds a [Stop using] button to the old style ACL rows so its possible to logout.
- Updates copy and documentation links for the upgrade notices
* Move notification texts to a slightly different layer (#4572)
* Further Simplify/refactor the actions/notification layer (#4573)
1. Move the 'with-feedback' actions to a 'with-blocking-action' mixin
which better describes what it does
2. Additional set of unit tests almost over the entire layer to prove
things work/add confidence for further changes
The multiple 'with-action' mixins used for every 'index/edit' combo are
now reduced down to only contain the functionality related to their
specific routes, i.e. where to redirect.
The actual functionality to block and carry out the action and then
notify are 'almost' split out so that their respective classes/objects do
one thing and one thing 'well'.
Mixins are chosen for the moment as the decoration approach used by
mixins feels better than multiple levels of inheritence, but I would
like to take this fuether in the future to a 'compositional' based
approach.
There is still possible further work to be done here, but I'm a lot
happier now this is reduced down into separate parts.
This enables people to enter things using the mouse to paste for
example, plus possible other things.
As an aside it also answers my query regarding `fillIn` for testing,
nothing needs to be actually _typed_ anymore! Doh
John Cowen
Kenia
John Cowen