* Make central conf test work when run in a suite.
This switches integration tests to hard restart Consul each time which causes less surpise when some tests need to set configs that don't work on consul reload. This also increases the isolation and repeatability of the tests by dropping Consul's state entirely for each case run.
* Remove aborted attempt to make restart optional.
* Add integration test for central config; fix central config WIP
* Add integration test for central config; fix central config WIP
* Set proxy protocol correctly and begin adding upstream support
* Add upstreams to service config cache key and start new notify watcher if they change.
This doesn't update the tests to pass though.
* Fix some merging logic get things working manually with a hack (TODO fix properly)
* Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway
* Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does
* Fix up service manageer and API test failures
* Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally
* Remove version.go hack - will make integration test fail until release
* Remove unused code from commands and upstream merge
* Re-bump version to 1.5.0
The way icons are positioned was changed to enable icons for policy
names, and in a separate PR h2's where altered to provide a nicer
looking settings page. Once these PR's where merged together they
slighly effected each other. This commit tweaks the CSS to refine, but
will be revisted at a later date
This PR adds a new {{template-anchor}} component. This component lets you specify a 'href template' in a handlebars like format instead of a normal string href. This template will be interpolated with the contents of a vars="" attribute.
Also contains code to add an extra UI Setting to be able to store a template to be used for this anchor in localStorage
Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required.
Also includes refinements/improvements for easier testing of deeply nested components.
1. ember-data adapter/serializer/model triplet for Roles
2. repository, form/validations and searching filter for Roles
3. Moves potentially, repeated, or soon to to repeated functionality
into a mixin (mainly for 'many policy' relationships)
4. A few styling tweaks for little edge cases around roles
5. Router additions, Route, Controller and templates for Roles
Also see:
* UI: ACL Roles cont. plus Service Identities (#5661 and #5720)
* ui: Replaces Service listing filterbar with a phrase-editor search (#5507)
1. New phrase-editor restricting search to whole phrases (acts on
enter key). Allows removal of previously entered phrases
2. Searching now allows arrays of terms, multiple terms work via AND
If a service instance show page is being viewed and the service instance
is deregistered, this closes the blocking query for the proxy as well as
the instance (the instances query will be clsed on the error)
Also adds skipped tests to nag in future
Previously the tomography wasn't using ember `get` so proxy updates
(specifically here whilst receiving a blocking update) wasn't working.
This adds `get` here until we update to newer `get`less ember and also
refactors slightly removing `n` and using `distance.length` instead
Skipped tests are adding here to nag us to come back here at some point.
1. If the modal gets bigger than 80% of the viewport height a scrollbar
will be shown. Currently there isn't anywhere it can get this big, but
future work involves possible larger modals
2. Usually its difficult to figure out which was the 'unchecked' radio
button using an onchange event. Luckily ember/handlebars changes its
properties after the onchange event, so knowing that and using an extra
data-checked attribute set via ember, we can figure out which radio
button has been 'unchecked'. This means the logic for opening an
closing modals becomes slightly easier
...also:
Temporarily overwrites native setTimeout and setInterval for e2e/acceptance
testing similar to how XHR is overwritten for e2e/acceptance testing.
This makes the blocking query acceptance tests run faster until we add a
better burstable rate limiter for blocking queries.
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
Also:
Add support for blocking queries on the service instance detail page
1. Previous we could return undefined when a service instance has no
proxy, but this means we have nothing to attach `meta` to. We've changed
this to return an almost empty object, so with only a meta property.
At first glance there doesn't seem to be any way to provide a proxy
object to templates and be able to detect whether it is actually null
or not so we instead change some conditional logic in the templates to
detect the property we are using to generate the anchor.
2. Made a `pauseUntil` test helper function for steps where we wait for
things. This helps for DRYness but also means if we can move away from
setInterval to something else later, we can do it in one place
3. Whilst running into point 1 here, we managed to make the blocking
queries eternally loop. Whilst this is due to an error in the code and
shouldn't ever happen whilst in actual use, we've added an extra check
so that we only recur/loop the blocking query if the previous response has a
`meta.cursor`
Adds support for blocking queries on the node detail page (#5489)
1. Moves data re-shaping for the templates variables into a repository
so they are easily covered by blocking queries (into coordinatesRepo)
2. The node API returns a 404 as signal for deregistration, we also
close the sessions and coordinates blocking queries when this happens
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
More recommendations for blocking queries clients was added here:
https://github.com/hashicorp/consul/pull/5358
This commit mainly adds cursor/index validation/correction based on
these recommendations (plus tests)
The recommendations also suggest that clients should include rate
limiting. Because of this, we've moved the throttling out of Consul UI
specific code and into Blocking Query specific code. Currently the 'rate
limiting' in this commit only adds a sleep to every iteration of the
loop, which is not the recommended approach, but the code here organizes
the throttling functionality into something we can work with later to
provide something more apt.
* ui: Add forking based on service instance id existence
Proxies come in 2 flavours, 'normal' and sidecar. We know when a proxy
is a sidecar proxy based on whether a DestinationServiceID is set.
LocalServiceAddress and LocalServicePort are only relevant for sidecar
proxies.
This adds template logic to show different text depending on this
information.
Additionally adds test around connect proxies (#5418)
1. Adds page object for the instance detail page
2. Adds further scenario steps used in the tests
3. Adds acceptance testing around the instance detail page. Services
with proxies and the sidecar proxies and proxies themselves
4. Adds datacenter column for upstreams
5. Fixes bug routing bug for decision as to whether to request proxy
information or not
Add totals to some listing views, remove healthcheck totals
1. Adds markup to render totals for Services, Nodes, Intentions and v1
ACLs
2. Removes counts from healthcheck filters, and therefore simplify text,
moving the copy to the templates
3. Alter test to reflect the fact that the text of the buttons are no
static in the component template rather than a dynamic attribute
This gives more prominence to 'Service Instances' as opposed to 'Services'. It also begins to surface Connect related 'nouns' such as 'Proxies' and 'Upstreams' and begins to interconnect them giving more visibility to operators.
Various smaller changes:
1. Move healthcheck-status component to healthcheck-output
2. Create a new healthcheck-status component for showing the number of
checks plus its icon
3. Create a new healthcheck-info component to group multiple statuses
plus a different view if there are no checks
4. Componentize tag-list
* ui: Add ember steps:list command for listing available steps
1. Adds `command` addon to house the new command
2. Start to organize out the steps themselves, bring a bit more order to
things ready to dedupe and cleanup
- Maintain http headers as JSON-API meta for all API requests (#4946)
- Add EventSource ready for implementing blocking queries
- EventSource project implementation to enable blocking queries for service and node listings (#5267)
- Add setting to enable/disable blocking queries (#5352)
Adds xhr connection managment to http/1.1 installs
This includes various things:
1. An object pool to 'acquire', 'release' and 'dispose' of objects, also
a 'purge' to completely empty it
2. A `Request` data object, mainly for reasoning about the object better
3. A pseudo http 'client' which doens't actually control the request
itself but does help to manage the connections
An initializer is used to detect the script element of the consul-ui sourcecode
which we use later to sniff the protocol that we are most likely using for API access
1. The factory is taken from the ember source, but makes it more
reusable
2. Purify converts conventional ember `computed` into a pure version
This commit only adds new files that could be used further down the line
`window` and `document` are easily injected anyhow, but this
primarily this keeps everything dom related in the same place.
Included here are changes to make all ember related objects use the dom
service `document` and `viewport` instead of just `document` and
`window`.
Quote from a previous PR (#4924) which explains the thinking around this:
> Now I have all these things in the dom service, it would make sense
to get window from there also. I was thinking of making a viewport
method, which would be a nice word whether window was a browser window,
an iframe (not really a window) like when ember testing, or anything
else. To me the viewport is what we are actually talking about here.
1. Ensure any unexpected developer errors are passed through/shown
2. Previously when errors where returns/resolved the special
isEnabled/isAuthorized would never get resolved. This was fine as they
were set to false to start with anyway, but this resolves them again to
false for completeness
3. Improved unit testing coverage
Paul Banks
Sarah Christoff
Tyler Ryan
R.B. Boyer
John Cowen
John Cowen