Update generate token endpoint (rpc, http, and api module)
If ServerExternalAddresses are set, it will override any addresses gotten from the "consul" service, and be used in the token instead, and dialed by the dialer. This allows for setting up a load balancer for example, in front of the consul servers.
Prior to this the dialing side of the peering would only ever work within the default partition. This commit allows properly parsing the partition field out of the API struct request body, query param and header.
These changes are primarily for Consul's UI, where we want to be more
specific about the state a peering is in.
- The "initial" state was renamed to pending, and no longer applies to
peerings being established from a peering token.
- Upon request to establish a peering from a peering token, peerings
will be set as "establishing". This will help distinguish between the
two roles: the cluster that generates the peering token and the
cluster that establishes the peering.
- When marked for deletion, peering state will be set to "deleting".
This way the UI determines the deletion via the state rather than the
"DeletedAt" field.
Co-authored-by: freddygv <freddy@hashicorp.com>
Once a peering is marked for deletion a new leader routine will now
clean up all imported resources and then the peering itself.
A lot of the logic was grabbed from the namespace/partitions deferred
deletions but with a handful of simplifications:
- The rate limiting is not configurable.
- Deleting imported nodes/services/checks is done by deleting nodes with
the Txn API. The services and checks are deleted as a side-effect.
- There is no "round rate limiter" like with namespaces and partitions.
This is because peerings are purely local, and deleting a peering in
the datacenter does not depend on deleting data from other DCs like
with WAN-federated namespaces. All rate limiting is handled by the
Raft rate limiter.
When deleting a peering we do not want to delete the peering and all
imported data in a single operation, since deleting a large amount of
data at once could overload Consul.
Instead we defer deletion of peerings so that:
1. When a peering deletion request is received via gRPC the peering is
marked for deletion by setting the DeletedAt field.
2. A leader routine will monitor for peerings that are marked for
deletion and kick off a throttled deletion of all imported resources
before deleting the peering itself.
This commit mostly addresses point #1 by modifying the peering service
to mark peerings for deletion. Another key change is to add a
PeeringListDeleted state store function which can return all peerings
marked for deletion. This function is what will be watched by the
deferred deletion leader routine.
The api module previously had defaultPartition and defaultNamespace vars
for when we need default/empty split usage between ent/oss respectively.
This commit moves those two variables out of test code so that they can
be used for the service exports config entry's `GetNamespace()` method.
Previously `GetNamespace()` would return "default" in both OSS and enterprise,
which can trip up automation that passes the result of this method as the
namespace to write a config entry.
The split vars are kept private to prevent external usage, and prefixed with
`split` for more clarity about their behavior.
* update gateway-services table with endpoints
* fix failing test
* remove unneeded config in test
* rename "endpoint" to "destination"
* more endpoint renaming to destination in tests
* update isDestination based on service-defaults config entry creation
* use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist)
* set unknown state to empty to avoid modifying alot of tests
* fix logic to set the kind correctly on CRUD
* fix failing tests
* add missing tests and fix service delete
* fix failing test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* fix a bug with kind and add relevant test
* fix compile error
* fix failing tests
* add kind to clone
* fix failing tests
* fix failing tests in catalog endpoint
* fix service dump test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* remove duplicate tests
* rename consts and fix kind when no destination is defined in the service-defaults.
* rename Kind to ServiceKind and change switch to use .(type)
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Adds a new query param merge-central-config for use with the below endpoints:
/catalog/service/:service
/catalog/connect/:service
/health/service/:service
/health/connect/:service
If set on the request, the response will include a fully resolved service definition which is merged with the proxy-defaults/global and service-defaults/:service config entries (on-demand style). This is useful to view the full service definition for a mesh service (connect-proxy kind or gateway kind) which might not be merged before being written into the catalog (example: in case of services in the agentless model).
I noticed that the JSON api endpoints for peerings json encodes protobufs directly, rather than converting them into their `api` package equivalents before marshal/unmarshaling them.
I updated this and used `mog` to do the annoying part in the middle.
Other changes:
- the status enum was converted into the friendlier string form of the enum for readability with tools like `curl`
- some of the `api` library functions were slightly modified to match other similar endpoints in UX (cc: @ndhanushkodi )
- peeringRead returns `nil` if not found
- partitions are NOT inferred from the agent's partition (matching 1.11-style logic)
* add queryBackend to the api query meta.
* add a changelog
* use string type instead of int
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Just like standard upstreams the order of applicability in descending precedence:
1. caller's `service-defaults` upstream override for destination
2. caller's `service-defaults` upstream defaults
3. destination's `service-resolver` ConnectTimeout
4. system default of 5s
Co-authored-by: mrspanishviking <kcardenas@hashicorp.com>
- `tls.incoming`: applies to the inbound mTLS targeting the public
listener on `connect-proxy` and `terminating-gateway` envoy instances
- `tls.outgoing`: applies to the outbound mTLS dialing upstreams from
`connect-proxy` and `ingress-gateway` envoy instances
Fixes#11966
When r.toHTTP is called, http.Request is built with the path
already escaped. This removes all calls to url.PathEscape that
would have led to double-escaped URLs.
set -euo pipefail
unset CDPATH
cd "$(dirname "$0")"
for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do
echo "=== require: $f ==="
sed -i '/require := require.New(t)/d' $f
# require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f
# require.XXX(tblah) but not require.XXX(t, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f
# require.XXX(rblah) but not require.XXX(r, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f
gofmt -s -w $f
done
for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do
echo "=== assert: $f ==="
sed -i '/assert := assert.New(t)/d' $f
# assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f
# assert.XXX(tblah) but not assert.XXX(t, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f
# assert.XXX(rblah) but not assert.XXX(r, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f
gofmt -s -w $f
done
Matt Keeler
DanStough
freddygv
Eric Haberkorn
Nitya Dhanushkodi
alex
R.B. Boyer
Evan Culver
Chris S. Kim
Fulvio
Freddy
Dhia Ayachi
Riddhi Shah
funkiestj
FFMMM
Mark Anderson
Kyle Havlovitz
Eric
John Eikenberry
Dao Thanh Tung
R.B. Boyer