consul/website/content/docs/troubleshoot/common-errors.mdx

212 lines
8.7 KiB
Plaintext
Raw Normal View History

---
2020-04-07 18:55:19 +00:00
layout: docs
page_title: Common Error Messages
---
# Common Error Messages
When installing and running Consul, there are some common messages you might see. Usually they indicate an issue in your network or in your server's configuration. Some of the more common errors and their solutions are listed below.
If you are getting an error message you don't see listed on this page, please consider following our general [Troubleshooting Guide][troubleshooting].
For common errors messages related to Kubernetes, please go to [Common errors on Kubernetes](#common-errors-on-kubernetes).
## Configuration file errors
### Multiple network interfaces
```text
Multiple private IPv4 addresses found. Please configure one with 'bind' and/or 'advertise'.
```
2020-04-06 20:27:35 +00:00
Your server has multiple active network interfaces. Consul needs to know which interface to use for local LAN communications. Add the [`bind`][bind] option to your configuration.
-> **Tip**: If your server does not have a static IP address, you can use a [go-sockaddr template][go-sockaddr] as the argument to the `bind` option, e.g. `"bind_addr": "{{GetInterfaceIP \"eth0\"}}"`.
### Configuration syntax errors
```text
Error parsing config.hcl: At 1:12: illegal char
```
2020-04-06 20:27:35 +00:00
```text
Error parsing config.hcl: At 1:32: key 'foo' expected start of object ('{') or assignment ('=')
```
2020-04-06 20:27:35 +00:00
```text
Error parsing server.json: invalid character '`' looking for beginning of value
```
2020-04-06 20:27:35 +00:00
There is a syntax error in your configuration file. If the error message doesn't identify the exact location in the file where the problem is, try using [jq] to find it, for example:
2020-05-19 18:32:38 +00:00
```shell-session
$ consul agent -server -config-file server.json
==> Error parsing server.json: invalid character '`' looking for beginning of value
$ cat server.json | jq .
parse error: Invalid numeric literal at line 3, column 29
```
## Invalid host name
```text
Node name "consul_client.internal" will not be discoverable via DNS due to invalid characters.
```
2020-04-06 20:27:35 +00:00
Add the [`node name`][node_name] option to your agent configuration and provide a valid DNS name.
## I/O timeouts
```text
Failed to join 10.0.0.99: dial tcp 10.0.0.99:8301: i/o timeout
```
2020-04-06 20:27:35 +00:00
```text
Failed to sync remote state: No cluster leader
```
2020-04-06 20:27:35 +00:00
If the Consul client and server are on the same LAN, then most likely, a firewall is blocking connections to the Consul server.
If they are not on the same LAN, check the [`retry_join`][retry_join] settings in the Consul client configuration. The client should be configured to join a cluster inside its local network.
## Deadline exceeded
```text
Error getting server health from "XXX": context deadline exceeded
```
2020-04-06 20:27:35 +00:00
These error messages indicate a general performance problem on the Consul server. Make sure you are monitoring Consul telemetry and system metrics according to our [monitoring guide][monitoring]. Increase the CPU or memory allocation to the server if needed. Check the performance of the network between Consul nodes.
## Too many open files
```text
Error accepting TCP connection: accept tcp [::]:8301: too many open files in system
```
2020-04-06 20:27:35 +00:00
```text
Get http://localhost:8500/: dial tcp 127.0.0.1:31643: socket: too many open files
```
2020-04-06 20:27:35 +00:00
On a busy cluster, the operating system may not provide enough file descriptors to the Consul process. You will need to increase the limit for the Consul user, and maybe the system-wide limit as well. A good guide for Linux can be found [here][files].
Or, if you are starting Consul from `systemd`, you could add `LimitNOFILE=65536` to the unit file for Consul. You can see our example unit file [here][systemd].
## Snapshot close error
Our RPC protocol requires support for a TCP half-close in order to signal the other side that they are done reading the stream, since we don't know the size in advance. This saves us from having to buffer just to calculate the size.
If a host does not properly implement half-close you may see an error message `[ERR] consul: Failed to close snapshot: write tcp <source>-><destination>: write: broken pipe` when saving snapshots. This should not affect saving and restoring snapshots.
This has been a [known issue](https://github.com/docker/libnetwork/issues/1204) in Docker, but may manifest in other environments as well.
## ACL Not Found
```text
RPC error making call: rpc error making call: ACL not found
```
2020-04-06 20:27:35 +00:00
This indicates that you have ACL enabled in your cluster, but you aren't passing a valid token. Make sure that when creating your tokens that they have the correct permissions set. In addition, you would want to make sure that an agent token is provided on each call.
## TLS and Certificates
### Incorrect certificate or certificate name
```text
Remote error: tls: bad certificate
```
2020-04-06 20:27:35 +00:00
```text
X509: certificate signed by unknown authority
```
2020-04-06 20:27:35 +00:00
Make sure that your Consul clients and servers are using the correct certificates, and that they've been signed by the same CA. The easiest way to do this is to follow [our guide][certificates].
If you generate your own certificates, make sure the server certificates include the special name `server.dc1.consul` in the Subject Alternative Name (SAN) field. (If you change the values of `datacenter` or `domain` in your configuration, update the SAN accordingly.)
### HTTP instead of HTTPS
```text
Error querying agent: malformed HTTP response
```
2020-04-06 20:27:35 +00:00
```text
Net/http: HTTP/1.x transport connection broken: malformed HTTP response "\x15\x03\x01\x00\x02\x02"
```
You are attempting to connect to a Consul agent with HTTP on a port that has been configured for HTTPS.
If you are using the Consul CLI, make sure you are specifying "https" in the `-http-addr` flag or the `CONSUL_HTTP_ADDR` environment variable.
If you are interacting with the API, change the URI scheme to "https".
## License warnings
```text
License: expiration time: YYYY-MM-DD HH:MM:SS -0500 EST, time left: 29m0s
```
2020-04-06 20:27:35 +00:00
You have installed an Enterprise version of Consul. If you are an Enterprise customer, [provide a license key][license] to Consul before it shuts down. Otherwise, install the open-source Consul binary instead.
-> **Note:** Enterprise binaries can be identified on our [download site][releases] by the `+ent` suffix.
## Common errors on Kubernetes
### Unable to connect to the Consul client on the same host
If the pods are unable to connect to a Consul client running on the same host,
first check if the Consul clients are up and running with `kubectl get pods`.
```shell-session
$ kubectl get pods --selector="component=client"
NAME READY STATUS RESTARTS AGE
consul-kzws6 1/1 Running 0 58s
```
If you are still unable to connect
and see `i/o timeout` or `connection refused` errors when connecting to the Consul client on the Kubernetes worker,
this could be because the CNI (Container Networking Interface)
does not [support](https://kubernetes.io/docs/concepts/extend-kubernetes/compute-storage-net/network-plugins/#support-hostport)
the use of `hostPort`.
```text
Put http://10.0.0.10:8500/v1/catalog/register: dial tcp 10.0.0.10:8500: connect: connection refused
```
```text
Put http://10.0.0.10:8500/v1/agent/service/register: dial tcp 10.0.0.10:8500: connect: connection refused
```
```text
Get http://10.0.0.10:8500/v1/status/leader: dial tcp 10.0.0.10:8500: i/o timeout
```
The IP `10.0.0.10` above refers to the IP of the host where the Consul client pods are running.
To work around this issue,
enable [`hostNetwork`](/docs/k8s/helm#v-client-hostnetwork) in your Helm values.
Using the host network will enable the pod to use the host's network namespace without
the need for CNI to support port mappings between containers and the host.
```yaml
client:
hostNetwork: true
dnsPolicy: ClusterFirstWithHostNet
```
-> **Note:** Using host network has security implications
as doing so gives the Consul client unnecessary access to all network traffic on the host.
We recommend raising an issue with the CNI you're using to add support for `hostPort`
and switching back to `hostPort` eventually.
2022-09-06 15:35:01 +00:00
[troubleshooting]: https://learn.hashicorp.com/consul/day-2-operations/advanced-operations/troubleshooting
2022-01-11 01:30:50 +00:00
[node_name]: /docs/agent/config/config-files#node_name
[retry_join]: /docs/agent/config/cli-flags#retry-join
[license]: /commands/license
[releases]: https://releases.hashicorp.com/consul/
[files]: https://easyengine.io/tutorials/linux/increase-open-files-limit
2022-09-06 15:35:01 +00:00
[certificates]: https://learn.hashicorp.com/consul/advanced/day-1-operations/certificates
[systemd]: https://learn.hashicorp.com/consul/advanced/day-1-operations/deployment-guide#configure-systemd
[monitoring]: https://learn.hashicorp.com/consul/advanced/day-1-operations/monitoring
2022-01-11 01:30:50 +00:00
[bind]: /docs/agent/config/cli-flags#_bind
[jq]: https://stedolan.github.io/jq/
[go-sockaddr]: https://godoc.org/github.com/hashicorp/go-sockaddr/template