consul/website/content/docs/security/acl/acl-rules.mdx

---
layout: docs
page_title: ACL Rules
description: >-
  Consul provides an optional Access Control List (ACL) system which can be used
  to control access to data and APIs. The ACL system is a Capability-based
  system that relies on tokens which can have fine grained rules applied to
  them. It is very similar to AWS IAM in many ways.
---

# ACL Rules

This topic describes how to configure rules for Consul's access control list (ACL) system. The ACL system enables you to control access to data and APIs. Refer to the [ACL system documentation](/docs/acl/acl-system) to learn more about ACLs. 

-> **1.4.0 and later:** This topic applies to Consul versions 1.4.0 and later. Refer to the [legacy ACL system documentation](/docs/acl/acl-legacy) for older versions of Consul.

## Rule Specification

ACL rules describe the level of access to resources. A rule is composed of a resource declaration and an access level defined with the `policy` keyword and a [policy disposition](#policy-dispositions). The following syntax describes the basic structure of a rule:

```hcl
<resource> {
  policy = "<policy disposition>"
}
```

### Segments
 
Many resources take an additional value that limits the scope of the rule to a resource _segment_. A resource segment can be the name of a specific set of resources, such as nodes configured with the same `name` value. 

The following syntax describes how to include a resource segment in the rule:

```hcl
<resource> "<segment>" {
  policy = "<policy disposition>"
}
``` 

Segmentation provides operators with more granular control over access to the resouce. Some resources, however, do not take a segment value. The following resource areas _can not_ be segmented:
 
* `acl`  
* `keyring` 
* `mesh`
* `operator` 

Use the following syntax to create rules for non-segmented resources: 

```hcl
<resource> = "<policy disposition>"
```

### Policy Dispositions

Use the `policy` keyword and one of the following access levels to set a policy disposition:

- `read`: Allows the resource to be read but not modified.
- `write`: Allows the resource to be read and modified.
- `deny`: Denies access to the resource.

You can also use a special `list` access level to allows access to all keys under a segment in the Consul KV. The `list` access level can only be used with the `key_prefix` resource. The [`acl.enable_key_list_policy`](/docs/agent/options#acl_enable_key_list_policy) setting must be set to `true`.

### Matching and Prefix Values

You can define rules for resource segments based on exact matches or by using resource prefixes to match several resource segments beginning with the same value. Matching segments on exact values is described in the [Segments](#segments) section.  

The following example rule is an exact match that denies access to `web-prod` service segments:

```hcl
service "web-prod" {
  policy = "deny"
}
```
You can append the resource with `_prefix` to match all resource segments beginning with the same value. The following example rule allows `write` access to all service segments that begin with "web":

```hcl
service_prefix "web" {
  policy = "write"
}
```

Prefix-based resource segments can also contain an empty string, which configures the rule to apply to all resources of the declared type. The following example rule allows `read` access to all `service` resources:

```hcl
service_prefix "" {
  policy = "read"
}
```

When using prefix-based rules, the most specific prefix match determines the action. In a real-world scenario, a combination of rules would be combined to create a flexible policy. Each team or business unit would use tokesn based on polcies that enforce several rules, for example: 

* A rule that denies access to a specific resource segment
* A prefix-based rule that allows write access to a class of resources 
* An empty prefix that grants read-only access to all resource within the declared class 

#### Matching Precedence

Exact matching rules will only apply to the exact resource specified. The order of precedence for matching rules are:

1. `deny` (highest priority)
1. `write`
1. `read` 

### Formatting Rules

Define rules using the
[HashiCorp Configuration Language (HCL)](https://github.com/hashicorp/hcl/). 
HCL is human readable and interoperable with JSON, making it easy to automate rule generation. 
The following examples show the same rule formatted in HCL and JSON:

#### HCL

```hcl
# These control access to the key/value store.
key_prefix "" {
  policy = "read"
}
key_prefix "foo/" {
  policy = "write"
}
key_prefix "foo/private/" {
  policy = "deny"
}
# Or for exact key matches
key "foo/bar/secret" {
  policy = "deny"
}

# This controls access to cluster-wide Consul operator information.
operator = "read"
```

#### JSON

```json
{
  "key_prefix": {
    "": {
      "policy": "read"
    },
    "foo/": {
      "policy": "write"
    },
    "foo/private/": {
      "policy": "deny"
    }
  },
  "key": {
    "foo/bar/secret": {
      "policy": "deny"
    }
  },
  "operator": "read"
}
```

## Defining Rules with the ACL API

You can configure ACLs remotely by calling the ACL HTTP API endpoint and including rules in the payload. The endpoint takes data formatted in HCL or JSON. Refer to the [ACL HTTP API endpoint documentation](/api/acl/acl) for details about the API.

The following example adds a set of rules that apply to the `key` resource (Consul K/V) within the `my-app-policy` policy. The rules are formatted in HCL, but they are wrapped in JSON so that the data can be sent using cURL:    

```shell-session
$ curl \
    --request PUT \
    --data \
'{
  "Name": "my-app-policy",
  "Rules": "key \"\" { policy = \"read\" } key \"foo/\" { policy = \"write\" } key \"foo/private/\" { policy = \"deny\" } operator = \"read\""
}' http://127.0.0.1:8500/v1/acl/policy?token=<token with ACL "write">
```

The following call performs the same operation as the previous example using JSON:

```shell-session
$ curl \
    --request PUT \
    --data \
'{
  "Name": "my-app-policy",
  "Rules": "{\"key\":{\"\":{\"policy\":\"read\"},\"foo/\":{\"policy\":\"write\"},\"foo/private\":{\"policy\":\"deny\"}},\"operator\":\"read\"}"
}' http://127.0.0.1:8500/v1/acl/policy?token=<management token>
```

The policy configuration is returned when the call is succesfully performaed:

```json
{
  "CreateIndex": 7,
  "Hash": "UMG6QEbV40Gs7Cgi6l/ZjYWUwRS0pIxxusFKyKOt8qI=",
  "ID": "5f423562-aca1-53c3-e121-cb0eb2ea1cd3",
  "ModifyIndex": 7,
  "Name": "my-app-policy",
  "Rules": "key \"\" { policy = \"read\" } key \"foo/\" { policy = \"write\" } key \"foo/private/\" { policy = \"deny\" } operator = \"read\""
}
```

The policy can now be specified either by name or by ID when
[creating a token](https://learn.hashicorp.com/tutorials/consul/access-control-setup-production#create-the-agent-token).
This will grant the rules provided to the [bearer of that token](/api#authentication).

## Resource and Rule Reference

The following table provides an overview of the resources you can use to create ACL rules.

| Resource                      | Description                                                                                                                                              | Segments |
|-------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------|----------|
| `acl`                         | Controls access to ACL operations in the [ACL API](/api/acl/acl). <br/>See [ACL Resource Rules](#acl-resource-rules) for details.                        | No       |
| `admin_partition`<br/>`admin_partition_prefix` | <EnterpriseAlert inline /> Controls access to one or more admin partitions. <br/>See [Admin Partition Rules](#admin-partition-rules) for details. | Yes      |
| `agent`<br/>`agent_prefix`    | Controls access to the utility operations in the [Agent API](/api/agent), such as `join` and `leave`. <br/>See [Agent Rules](#agent-rules) for details.  | Yes      |
| `event`<br/>`event_prefix`    | Controls access to event operations in the [Event API](/api/event), such as firing and listing events. <br/>See [Event Rules](#event-rules) for details. | Yes      |
| `key`<br/>`key_prefix` &nbsp; | Controls access to key/value store operations in the [KV API](/api/kv). <br/>Can also use the `list` access level when setting the policy disposition. <br/>Has additional value options in Consul Enterprise for integrating with [Sentinel](https://docs.hashicorp.com/sentinel/consul).  <br/>See [Key/Value Rules](#key-value-rules) for details. | Yes      |
| `keyring` &nbsp; &nbsp; &nbsp; | Controls access to keyring operations in the [Keyring API](/api/keyring). <br/>See [Keyring Rules](#keyring-rules) for details. | No      |
| `mesh` &nbsp; &nbsp; &nbsp; | Provides operator-level permissions for resources in the admin partition, such as ingress gateways or mesh proxy defaults. See [Mesh Rules](#mesh-rulres) for details.  | No      |
| `namespace`<br/>`namespace_prefix` | <EnterpriseAlert inline /> Controls access to one or more namespaces. <br/>See [Namespace Rules](#namespace-rules) for details. | Yes      |
| `node`<br/>`node_prefix` &nbsp; | Controls access to node-level registration and read access to the [Catalog API](/api/catalog). <br/>See [Node Rules](#node-rules) for details. | Yes      |
| `operator` &nbsp; &nbsp; &nbsp; | Controls access to cluster-level operations available in the [Operator API](/api/operator) excluding keyring API endpoints. <br/>See [Operator Rules](#operator-rules) for details. | No      |
| `query`<br/>`query_prefix` | Controls access to create, update, and delete prepared queries in the [Prepared Query API](/api/query). Access to the [node](#node-rules) and [service](#service-rules) must also be granted. <br/>See [Prepared Query Rules](#prepared-query-rules) for details. | Yes      |
| `service`<br/>`service_prefix` | Controls service-level registration and read access to the [Catalog API](/api/catalog), as well as service discovery with the [Health API](/api/health). <br/>See [Service Rules](#node-rules) for details. | Yes      |
| `session`<br/>`session_prefix` | Controls access to operations in the [Session API](/api/session). <br/>See [Session Rules](#session-rules) for details. | Yes      |

The following topics provide additional details about the available resources.

### ACL Resource Rules

The `acl` resource controls access to ACL operations in the [ACL API](/api/acl/acl). Only one `acl` rule is allowed per policy. The value is set to one of the [policy dispositions](#policy-dispositions).

The `acl = "write"` rule is also required to create snapshots. This is because all token secrets are contained within the snapshot.

Rules for ACL resources are non-segmented. 

In the following example, `write` access to the ACL API. The rule enables the operator to read or write ACLs, as well as discover the secret ID of any token. 

```hcl
acl = "write"
```

### Admin Partition Rules <EnterpriseAlert inline />

The `admin_partition` and `admin_partition_prefix` resource controls access to one or more admin partitions. 
You can include any number of namespace rules inside the admin partition. 

In the following example, the agent has write access to the `ex-namespace` namespace, as well as namespaces prefixed with `ex-` in the `example` partition.
The `mesh` resource is also scoped to the admin partition rule, which grants `write` access to mesh-level resources in the partition:

```hcl
admin_partition "example" {  
  mesh = "write"
  node "my-node" { 
    policy = "write"
  }
    ...
  namespace "ex-namespace" {
    ... 
  }
  namespace_prefix "exns-" { 
    ...
  } 
}
admin_partition_prefix "ex-" { 
  ... (Same as above)
}
```

### Agent Rules

The `agent` and `agent_prefix` resources control access to the utility operations in the [Agent API](/api/agent),
such as join and leave. All of the catalog-related operations are covered by the [`node` or `node_prefix`](#node-rules)
and [`service` or `service_prefix`](#service-rules) policies instead.

Agent rules look like this:

```hcl
agent_prefix "" {
  policy = "read"
}
agent "foo" {
  policy = "write"
}
agent_prefix "bar" {
  policy = "deny"
}
```

Agent rules are keyed by the node name they apply to. In the example above the rules
allow read-only access to any node name by using the empty prefix, read-write access to
the node with the _exact_ name `foo`, and denies all access to any node name that starts
with `bar`.

Since [Agent API](/api/agent) utility operations may be required before an agent is joined to
a cluster, or during an outage of the Consul servers or ACL datacenter, a special token may be
configured with [`acl.tokens.agent_master`](/docs/agent/options#acl_tokens_agent_master) to allow
write access to these operations even if no ACL resolution capability is available.

### Event Rules

The `event` and `event_prefix` resources control access to event operations in the [Event API](/api/event), such as
firing events and listing events.

Event rules look like this:

```hcl
event_prefix "" {
  policy = "read"
}
event "deploy" {
  policy = "write"
}
```

Event rules are segmented by the event name they apply to. In the example above, the rules allow
read-only access to any event, and firing of the "deploy" event.

The [`consul exec`](/commands/exec) command uses events with the "\_rexec" prefix during
operation, so to enable this feature in a Consul environment with ACLs enabled, you will need to
give agents a token with access to this event prefix, in addition to configuring
[`disable_remote_exec`](/docs/agent/options#disable_remote_exec) to `false`.

### Key/Value Rules

The `key` and `key_prefix` resources control access to key/value store operations in the [KV API](/api/kv). Key
rules look like this:

```hcl
key_prefix "" {
  policy = "read"
}
key "foo" {
  policy = "write"
}
key "bar" {
  policy = "deny"
}
```

Key rules are segmented by the key name they apply to. In the example above, the rules allow read-only access
to any key name with the empty prefix rule, allow read-write access to the "foo" key, and deny access to the "bar" key.

#### List Policy for Keys

Consul 1.0 introduces a new `list` policy for keys that is only enforced when opted in via the boolean config param "acl.enable_key_list_policy".
`list` controls access to recursively list entries and keys, and enables more fine grained policies. With "acl.enable_key_list_policy",
recursive reads via [the KV API](/api/kv#recurse) with an invalid token result in a 403. Example:

```hcl
key_prefix "" {
 policy = "deny"
}

key_prefix "bar" {
 policy = "list"
}

key_prefix "baz" {
 policy = "read"
}
```

In the example above, the rules allow reading the key "baz", and only allow recursive reads on the prefix "bar".

A token with `write` access on a prefix also has `list` access. A token with `list` access on a prefix also has `read` access on all its suffixes.

#### Sentinel Integration <EnterpriseAlert inline />

Consul Enterprise supports additional optional fields for key write policies for
[Sentinel](https://docs.hashicorp.com/sentinel/consul/) integration. An example key rule with a
Sentinel code policy looks like this:

```hcl
key "foo" {
  policy = "write"
  sentinel {
      code = <<EOF
import "strings"
main = rule { strings.has_suffix(value, "bar") }
EOF
      enforcementlevel = "hard-mandatory"
  }
}
```

For more detailed information, see the [Consul Sentinel documentation](/docs/agent/sentinel).

### Keyring Rules

The `keyring` resource controls access to keyring operations in the
[Keyring API](/api/operator/keyring).

Keyring rules look like this:

```hcl
keyring = "write"
```

There's only one keyring policy allowed per rule set, and its value is set to one of the policy
dispositions. In the example above, the keyring may be read and updated.

### Mesh Rules

The `mesh` resource controls access to ingress gateways, terminating gateways, and mesh configuration entries. 

See [Admin Partition Rules](#admin-partition-rules) for an example rule that uses the `mesh` resource. 
 

### Namespace Rules <EnterpriseAlert inline />

The `namespace` and `namespace_prefix` resource controls access to Consul namespaces. Namespaces define a scope of resources for which ACL rules apply. ACL rules, themselves, can then be defined to only to apply to specific namespaces. 

-> **Consul 1.7.0 and later**: The ability to add many types of resources to separate namespaces was added to [Consul Enterprise](https://www.hashicorp.com/consul) 1.7.0. 

The following examples describe how namespace rules can be defined in a policy:

```hcl
namespace_prefix "" {

  # grant service:read for all services in all namespaces
  service_prefix "" {
    policy = "read"
  }

  # grant node:read for all nodes in all namespaces
  node_prefix "" {
    policy = "read"
  }
}

namespace "foo" {
  # grants permission to manage ACLs only for the foo namespace
  acl = "write"

  # grants permission to rename the foo namespace
  policy = "write"

  # grants write permissions to the KV for namespace foo
  key_prefix "" {
    policy = "write"
  }

  # grants write permissions for sessions for namespace foo
  session_prefix "" {
    policy = "write"
  }

  # grants service:write for all services in the foo namespace
  service_prefix "" {
    policy = "write"
  }

  # grants node:read for all nodes
  node_prefix "" {
    policy = "read"
  }
}
```

#### Restrictions

The following restrictions apply when a rule is defined in any user-created namespace:

1. `operator` rules are not allowed.
2. `event` rules are not allowed.
3. `keyring` rules are not allowed.
4. `query` rules are not allowed.
5. `node` rules that attempt to grant `write` privileges are not allowed.

These restrictions do not apply to the `default` namespace created by Consul. In general all of the
above are permissions that only an operator should have and thus granting these permissions can
only be done within the default namespace.

#### Implicit Namespacing

Rules and policies created within a namespace will inherit the namespace configuration.
This means that rules and policies will be implicitly namespaced and do not need additional configuration.
The restrictions outlined above will apply to these rules and policies. Additionally, rules and policies within a
specific namespace are prevented from accessing resources in another namespace.

### Node Rules

The `node` and `node_prefix` resources controls node-level registration and read access to the [Catalog API](/api/catalog),
service discovery with the [Health API](/api/health), and filters results in [Agent API](/api/agent)
operations like fetching the list of cluster members.

Node rules look like this:

```hcl
node_prefix "" {
  policy = "read"
}
node "app" {
  policy = "write"
}
node "admin" {
  policy = "deny"
}
```

Node rules are segmented by the node name they apply to. In the example above, the rules allow read-only access to any node name with the empty prefix, allow
read-write access to the "app" node, and deny all access to the "admin" node.

Agents need to be configured with an [`acl.tokens.agent`](/docs/agent/options#acl_tokens_agent)
with at least "write" privileges to their own node name in order to register their information with
the catalog, such as node metadata and tagged addresses. If this is configured incorrectly, the agent
will print an error to the console when it tries to sync its state with the catalog.

Consul's DNS interface is also affected by restrictions on node rules. If the
[`acl.token.default`](/docs/agent/options#acl_tokens_default) used by the agent does not have "read" access to a
given node, then the DNS interface will return no records when queried for it.

When reading from the catalog or retrieving information from the health endpoints, node rules are
used to filter the results of the query. This allows for configurations where a token has access
to a given service name, but only on an allowed subset of node names.

Node rules come into play when using the [Agent API](/api/agent) to register node-level
checks. The agent will check tokens locally as a check is registered, and Consul also performs
periodic [anti-entropy](/docs/internals/anti-entropy) syncs, which may require an
ACL token to complete. To accommodate this, Consul provides two methods of configuring ACL tokens
to use for registration events:

1. Using the [acl.tokens.default](/docs/agent/options#acl_tokens_default) configuration
   directive. This allows a single token to be configured globally and used
   during all check registration operations.
2. Providing an ACL token with service and check definitions at
   registration time. This allows for greater flexibility and enables the use
   of multiple tokens on the same agent. Examples of what this looks like are
   available for both [services](/docs/agent/services) and
   [checks](/docs/agent/checks). Tokens may also be passed to the
   [HTTP API](/api) for operations that require them.

In addition to ACLs, in Consul 0.9.0 and later, the agent must be configured with
[`enable_script_checks`](/docs/agent/options#_enable_script_checks) set to `true` in order to enable
script checks.

### Operator Rules

The `operator` resource controls access to cluster-level operations in the
[Operator API](/api/operator), other than the [Keyring API](/api/operator/keyring).

Operator rules look like this:

```hcl
operator = "read"
```

There's only one operator rule allowed per rule set, and its value is set to one of the policy
dispositions. In the example above, the token could be used to query the operator endpoints for
diagnostic purposes but not make any changes.

### Prepared Query Rules

The `query` and `query_prefix` resources control access to create, update, and delete prepared queries in the
[Prepared Query API](/api/query). Executing queries is subject to `node`/`node_prefix` and `service`/`service_prefix`
policies, as will be explained below.

Query rules look like this:

```hcl
query_prefix "" {
  policy = "read"
}
query "foo" {
  policy = "write"
}
```

Query rules are segmented by the query name they apply to. In the example above, the rules allow read-only
access to any query name with the empty prefix, and allow read-write access to the query named "foo".
This allows control of the query namespace to be delegated based on ACLs.

There are a few variations when using ACLs with prepared queries, each of which uses ACLs in one of two
ways: open, protected by unguessable IDs or closed, managed by ACL policies. These variations are covered
here, with examples:

- Static queries with no `Name` defined are not controlled by any ACL policies.
  These types of queries are meant to be ephemeral and not shared to untrusted
  clients, and they are only reachable if the prepared query ID is known. Since
  these IDs are generated using the same random ID scheme as ACL Tokens, it is
  infeasible to guess them. When listing all prepared queries, only a management
  token will be able to see these types, though clients can read instances for
  which they have an ID. An example use for this type is a query built by a
  startup script, tied to a session, and written to a configuration file for a
  process to use via DNS.

- Static queries with a `Name` defined are controlled by the `query` and `query_prefix`
  ACL resources. Clients are required to have an ACL token with permissions on to
  access that query name. Clients can list or read queries for
  which they have "read" access based on their prefix, and similar they can
  update any queries for which they have "write" access. An example use for
  this type is a query with a well-known name (eg. `prod-primary-customer-db`)
  that is used and known by many clients to provide geo-failover behavior for
  a database.

- [Template queries](/api/query#prepared-query-templates)
  queries work like static queries with a `Name` defined, except that a catch-all
  template with an empty `Name` requires an ACL token that can write to any query
  prefix.

When prepared queries are executed via DNS lookups or HTTP requests, the ACL
checks are run against the service being queried, similar to how ACLs work with
other service lookups. There are several ways the ACL token is selected for this
check:

- If an ACL Token was captured when the prepared query was defined, it will be
  used to perform the service lookup. This allows queries to be executed by
  clients with lesser or even no ACL Token, so this should be used with care.

- If no ACL Token was captured, then the client's ACL Token will be used to
  perform the service lookup.

- If no ACL Token was captured and the client has no ACL Token, then the
  anonymous token will be used to perform the service lookup.

In the common case, the ACL Token of the invoker is used
to test the ability to look up a service. If a `Token` was specified when the
prepared query was created, the behavior changes and now the captured
ACL Token set by the definer of the query is used when looking up a service.

Capturing ACL Tokens is analogous to
[PostgreSQL’s](http://www.postgresql.org/docs/current/static/sql-createfunction.html)
`SECURITY DEFINER` attribute which can be set on functions, and using the client's ACL
Token is similar to the complementary `SECURITY INVOKER` attribute.

Prepared queries were originally introduced in Consul 0.6.0, and ACL behavior remained
unchanged through version 0.6.3, but was then changed to allow better management of the
prepared query namespace.

These differences are outlined in the table below:

| Operation                          | Version <= 0.6.3                                                                                                                                                                                 | Version > 0.6.3                                                                                                                                                                                                                     |
| ---------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Create static query without `Name` | The ACL Token used to create the prepared query is checked to make sure it can access the service being queried. This token is captured as the `Token` to use when executing the prepared query. | No ACL policies are used as long as no `Name` is defined. No `Token` is captured by default unless specifically supplied by the client when creating the query.                                                                     |
| Create static query with `Name`    | The ACL Token used to create the prepared query is checked to make sure it can access the service being queried. This token is captured as the `Token` to use when executing the prepared query. | The client token's `query` ACL policy is used to determine if the client is allowed to register a query for the given `Name`. No `Token` is captured by default unless specifically supplied by the client when creating the query. |
| Manage static query without `Name` | The ACL Token used to create the query or a token with management privileges must be supplied in order to perform these operations.                                                              | Any client with the ID of the query can perform these operations.                                                                                                                                                                   |
| Manage static query with a `Name`  | The ACL token used to create the query or a token with management privileges must be supplied in order to perform these operations.                                                              | Similar to create, the client token's `query` ACL policy is used to determine if these operations are allowed.                                                                                                                      |
| List queries                       | A token with management privileges is required to list any queries.                                                                                                                              | The client token's `query` ACL policy is used to determine which queries they can see. Only tokens with management privileges can see prepared queries without `Name`.                                                              |
| Execute query                      | Since a `Token` is always captured when a query is created, that is used to check access to the service being queried. Any token supplied by the client is ignored.                              | The captured token, client's token, or anonymous token is used to filter the results, as described above.                                                                                                                           |

### Service Rules

The `service` and `service_prefix` resources control service-level registration and read access to the [Catalog API](/api/catalog)
and service discovery with the [Health API](/api/health).

Service rules look like this:

```hcl
service_prefix "" {
  policy = "read"
}
service "app" {
  policy = "write"
}
service "admin" {
  policy = "deny"
}
```

Service rules are segmented by the service name they apply to. In the example above, the rules allow read-only
access to any service name with the empty prefix, allow read-write access to the "app" service, and deny all
access to the "admin" service.

Consul's DNS interface is affected by restrictions on service rules. If the
[`acl.tokens.default`](/docs/agent/options#acl_tokens_default) used by the agent does not have "read" access to a
given service, then the DNS interface will return no records when queried for it.

When reading from the catalog or retrieving information from the health endpoints, service rules are
used to filter the results of the query.

Service rules come into play when using the [Agent API](/api/agent) to register services or
checks. The agent will check tokens locally as a service or check is registered, and Consul also
performs periodic [anti-entropy](/docs/internals/anti-entropy) syncs, which may require an
ACL token to complete. To accommodate this, Consul provides two methods of configuring ACL tokens
to use for registration events:

1. Using the [acl.tokens.default](/docs/agent/options#acl_tokens_default) configuration
   directive. This allows a single token to be configured globally and used
   during all service and check registration operations.
2. Providing an ACL token with service and check definitions at registration
   time. This allows for greater flexibility and enables the use of multiple
   tokens on the same agent. Examples of what this looks like are available for
   both [services](/docs/agent/services) and
   [checks](/docs/agent/checks). Tokens may also be passed to the [HTTP
   API](/api) for operations that require them. **Note:** all tokens
   passed to an agent are persisted on local disk to allow recovery from
   restarts. See [`-data-dir` flag
   documentation](/docs/agent/options#acl_token) for notes on securing
   access.

In addition to ACLs, in Consul 0.9.0 and later, the agent must be configured with
[`enable_script_checks`](/docs/agent/options#_enable_script_checks) or
[`enable_local_script_checks`](/docs/agent/options#_enable_local_script_checks)
set to `true` in order to enable script checks.

Service rules are also used to grant read or write access to intentions. The
following policy provides read-write access to the "app" service, and explicitly
grants `intentions:read` access to view intentions associated with the "app" service.

```hcl
service "app" {
  policy = "write"
  intentions = "read"
}
```

Refer to [Intention Management Permissions](/docs/connect/intentions#intention-management-permissions)
for more information about managing intentions access with service rules.

### Session Rules

The `session` and `session_prefix` resources controls access to [Session API](/api/session) operations.

Session rules look like this:

```hcl
session_prefix "" {
  policy = "read"
}
session "app" {
  policy = "write"
}
session "admin" {
  policy = "deny"
}
```

Session rules are segmented by the node name they apply to. In the example above, the rules allow read-only
access to sessions on node name with the empty prefix, allow creating sessions on the node named "app",
and deny all access to any sessions on the "admin" node.