consul/vendor/github.com/hashicorp/raft/fsm.go

236 lines
6.5 KiB
Go
Raw Normal View History

package raft
import (
"fmt"
"io"
"time"
"github.com/armon/go-metrics"
)
// FSM provides an interface that can be implemented by
// clients to make use of the replicated log.
type FSM interface {
// Apply log is invoked once a log entry is committed.
// It returns a value which will be made available in the
// ApplyFuture returned by Raft.Apply method if that
// method was called on the same Raft node as the FSM.
Apply(*Log) interface{}
// Snapshot is used to support log compaction. This call should
// return an FSMSnapshot which can be used to save a point-in-time
// snapshot of the FSM. Apply and Snapshot are not called in multiple
// threads, but Apply will be called concurrently with Persist. This means
// the FSM should be implemented in a fashion that allows for concurrent
// updates while a snapshot is happening.
Snapshot() (FSMSnapshot, error)
// Restore is used to restore an FSM from a snapshot. It is not called
// concurrently with any other command. The FSM must discard all previous
// state.
Restore(io.ReadCloser) error
}
// BatchingFSM extends the FSM interface to add an ApplyBatch function. This can
// optionally be implemented by clients to enable multiple logs to be applied to
// the FSM in batches. Up to MaxAppendEntries could be sent in a batch.
type BatchingFSM interface {
// ApplyBatch is invoked once a batch of log entries has been committed and
// are ready to be applied to the FSM. ApplyBatch will take in an array of
// log entries. These log entries will be in the order they were committed,
// will not have gaps, and could be of a few log types. Clients should check
// the log type prior to attempting to decode the data attached. Presently
// the LogCommand and LogConfiguration types will be sent.
//
// The returned slice must be the same length as the input and each response
// should correlate to the log at the same index of the input. The returned
// values will be made available in the ApplyFuture returned by Raft.Apply
// method if that method was called on the same Raft node as the FSM.
ApplyBatch([]*Log) []interface{}
FSM
}
// FSMSnapshot is returned by an FSM in response to a Snapshot
// It must be safe to invoke FSMSnapshot methods with concurrent
// calls to Apply.
type FSMSnapshot interface {
// Persist should dump all necessary state to the WriteCloser 'sink',
// and call sink.Close() when finished or call sink.Cancel() on error.
Persist(sink SnapshotSink) error
// Release is invoked when we are finished with the snapshot.
Release()
}
// runFSM is a long running goroutine responsible for applying logs
// to the FSM. This is done async of other logs since we don't want
// the FSM to block our internal operations.
func (r *Raft) runFSM() {
var lastIndex, lastTerm uint64
batchingFSM, batchingEnabled := r.fsm.(BatchingFSM)
configStore, configStoreEnabled := r.fsm.(ConfigurationStore)
commitSingle := func(req *commitTuple) {
// Apply the log if a command or config change
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
var resp interface{}
// Make sure we send a response
defer func() {
// Invoke the future if given
if req.future != nil {
req.future.response = resp
req.future.respond(nil)
}
}()
switch req.log.Type {
case LogCommand:
start := time.Now()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
resp = r.fsm.Apply(req.log)
metrics.MeasureSince([]string{"raft", "fsm", "apply"}, start)
case LogConfiguration:
if !configStoreEnabled {
// Return early to avoid incrementing the index and term for
// an unimplemented operation.
return
}
start := time.Now()
configStore.StoreConfiguration(req.log.Index, DecodeConfiguration(req.log.Data))
metrics.MeasureSince([]string{"raft", "fsm", "store_config"}, start)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
}
// Update the indexes
lastIndex = req.log.Index
lastTerm = req.log.Term
}
commitBatch := func(reqs []*commitTuple) {
if !batchingEnabled {
for _, ct := range reqs {
commitSingle(ct)
}
return
}
// Only send LogCommand and LogConfiguration log types. LogBarrier types
// will not be sent to the FSM.
shouldSend := func(l *Log) bool {
switch l.Type {
case LogCommand, LogConfiguration:
return true
}
return false
}
var lastBatchIndex, lastBatchTerm uint64
sendLogs := make([]*Log, 0, len(reqs))
for _, req := range reqs {
if shouldSend(req.log) {
sendLogs = append(sendLogs, req.log)
}
lastBatchIndex = req.log.Index
lastBatchTerm = req.log.Term
}
var responses []interface{}
if len(sendLogs) > 0 {
start := time.Now()
responses = batchingFSM.ApplyBatch(sendLogs)
metrics.MeasureSince([]string{"raft", "fsm", "applyBatch"}, start)
metrics.AddSample([]string{"raft", "fsm", "applyBatchNum"}, float32(len(reqs)))
// Ensure we get the expected responses
if len(sendLogs) != len(responses) {
panic("invalid number of responses")
}
}
// Update the indexes
lastIndex = lastBatchIndex
lastTerm = lastBatchTerm
var i int
for _, req := range reqs {
var resp interface{}
// If the log was sent to the FSM, retrieve the response.
if shouldSend(req.log) {
resp = responses[i]
i++
}
if req.future != nil {
req.future.response = resp
req.future.respond(nil)
}
}
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
restore := func(req *restoreFuture) {
// Open the snapshot
meta, source, err := r.snapshots.Open(req.ID)
if err != nil {
req.respond(fmt.Errorf("failed to open snapshot %v: %v", req.ID, err))
return
}
// Attempt to restore
start := time.Now()
if err := r.fsm.Restore(source); err != nil {
req.respond(fmt.Errorf("failed to restore snapshot %v: %v", req.ID, err))
source.Close()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
return
}
source.Close()
metrics.MeasureSince([]string{"raft", "fsm", "restore"}, start)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Update the last index and term
lastIndex = meta.Index
lastTerm = meta.Term
req.respond(nil)
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
snapshot := func(req *reqSnapshotFuture) {
// Is there something to snapshot?
if lastIndex == 0 {
req.respond(ErrNothingNewToSnapshot)
return
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Start a snapshot
start := time.Now()
snap, err := r.fsm.Snapshot()
metrics.MeasureSince([]string{"raft", "fsm", "snapshot"}, start)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Respond to the request
req.index = lastIndex
req.term = lastTerm
req.snapshot = snap
req.respond(err)
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
for {
select {
case ptr := <-r.fsmMutateCh:
switch req := ptr.(type) {
case []*commitTuple:
commitBatch(req)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
case *restoreFuture:
restore(req)
default:
panic(fmt.Errorf("bad type passed to fsmMutateCh: %#v", ptr))
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
case req := <-r.fsmSnapshotCh:
snapshot(req)
case <-r.shutdownCh:
return
}
}
}