consul/website/source/docs/agent/http/agent.html.markdown

---
layout: "docs"
page_title: "Agent (HTTP)"
sidebar_current: "docs-agent-http-agent"
description: >
  The Agent endpoints are used to interact with the local Consul agent.
---

# Agent HTTP Endpoint

The Agent endpoints are used to interact with the local Consul agent. Usually,
services and checks are registered with an agent which then takes on the
burden of keeping that data synchronized with the cluster.  For example, the
agent registers services and checks with the Catalog and performs
[anti-entropy](/docs/internals/anti-entropy.html) to recover from outages.

The following endpoints are supported:

* [`/v1/agent/checks`](#agent_checks) : Returns the checks the local agent is managing
* [`/v1/agent/services`](#agent_services) : Returns the services the local agent is managing
* [`/v1/agent/members`](#agent_members) : Returns the members as seen by the local serf agent
* [`/v1/agent/self`](#agent_self) : Returns the local node configuration
* [`/v1/agent/maintenance`](#agent_maintenance) : Manages node maintenance mode
* [`/v1/agent/join/<address>`](#agent_join) : Triggers the local agent to join a node
* [`/v1/agent/force-leave/<node>`](#agent_force_leave)>: Forces removal of a node
* [`/v1/agent/check/register`](#agent_check_register) : Registers a new local check
* [`/v1/agent/check/deregister/<checkID>`](#agent_check_deregister) : Deregisters a local check
* [`/v1/agent/check/pass/<checkID>`](#agent_check_pass) : Marks a local test as passing
* [`/v1/agent/check/warn/<checkID>`](#agent_check_warn) : Marks a local test as warning
* [`/v1/agent/check/fail/<checkID>`](#agent_check_fail) : Marks a local test as critical
* [`/v1/agent/service/register`](#agent_service_register) : Registers a new local service
* [`/v1/agent/service/deregister/<serviceID>`](#agent_service_deregister) : Deregisters a local service
* [`/v1/agent/service/maintenance/<serviceID>`](#agent_service_maintenance) : Manages service maintenance mode

### <a name="agent_checks"></a> /v1/agent/checks

This endpoint is used to return all the checks that are registered with
the local agent. These checks were either provided through configuration files
or added dynamically using the HTTP API. It is important to note that the checks
known by the agent may be different from those reported by the Catalog. This is usually
due to changes being made while there is no leader elected. The agent performs active
[anti-entropy](/docs/internals/anti-entropy.html), so in most situations everything will
be in sync within a few seconds.

This endpoint is hit with a GET and returns a JSON body like this:

```javascript
{
  "service:redis": {
    "Node": "foobar",
    "CheckID": "service:redis",
    "Name": "Service 'redis' check",
    "Status": "passing",
    "Notes": "",
    "Output": "",
    "ServiceID": "redis",
    "ServiceName": "redis"
  }
}
```

### <a name="agent_services"></a> /v1/agent/services

This endpoint is used to return all the services that are registered with
the local agent. These services were either provided through configuration files
or added dynamically using the HTTP API. It is important to note that the services
known by the agent may be different from those reported by the Catalog. This is usually
due to changes being made while there is no leader elected. The agent performs active
[anti-entropy](/docs/internals/anti-entropy.html), so in most situations everything will
be in sync within a few seconds.

This endpoint is hit with a GET and returns a JSON body like this:

```javascript
{
  "redis": {
    "ID": "redis",
    "Service": "redis",
    "Tags": null,
    "Address": "",
    "Port": 8000
  }
}
```

### <a name="agent_members"></a> /v1/agent/members

This endpoint is used to return the members the agent sees in the
cluster gossip pool. Due to the nature of gossip, this is eventually consistent: the
results may differ by agent. The strongly consistent view of nodes is
instead provided by "/v1/catalog/nodes".

For agents running in server mode, providing a "?wan=1" query parameter returns
the list of WAN members instead of the LAN members returned by default.

This endpoint is hit with a GET and returns a JSON body like:

```javascript
[
  {
    "Name": "foobar",
    "Addr": "10.1.10.12",
    "Port": 8301,
    "Tags": {
      "bootstrap": "1",
      "dc": "dc1",
      "port": "8300",
      "role": "consul"
    },
    "Status": 1,
    "ProtocolMin": 1,
    "ProtocolMax": 2,
    "ProtocolCur": 2,
    "DelegateMin": 1,
    "DelegateMax": 3,
    "DelegateCur": 3
  }
]
```

### <a name="agent_self"></a> /v1/agent/self

This endpoint is used to return the configuration and member information of the local agent.

It returns a JSON body like this:

```javascript
{
  "Config": {
    "Bootstrap": true,
    "Server": true,
    "Datacenter": "dc1",
    "DataDir": "/tmp/consul",
    "DNSRecursor": "",
    "DNSRecursors": [],
    "Domain": "consul.",
    "LogLevel": "INFO",
    "NodeName": "foobar",
    "ClientAddr": "127.0.0.1",
    "BindAddr": "0.0.0.0",
    "AdvertiseAddr": "10.1.10.12",
    "Ports": {
      "DNS": 8600,
      "HTTP": 8500,
      "RPC": 8400,
      "SerfLan": 8301,
      "SerfWan": 8302,
      "Server": 8300
    },
    "LeaveOnTerm": false,
    "SkipLeaveOnInt": false,
    "StatsiteAddr": "",
    "Protocol": 1,
    "EnableDebug": false,
    "VerifyIncoming": false,
    "VerifyOutgoing": false,
    "CAFile": "",
    "CertFile": "",
    "KeyFile": "",
    "StartJoin": [],
    "UiDir": "",
    "PidFile": "",
    "EnableSyslog": false,
    "RejoinAfterLeave": false
  },
  "Member": {
    "Name": "foobar",
    "Addr": "10.1.10.12",
    "Port": 8301,
    "Tags": {
      "bootstrap": "1",
      "dc": "dc1",
      "port": "8300",
      "role": "consul",
      "vsn": "1",
      "vsn_max": "1",
      "vsn_min": "1"
    },
    "Status": 1,
    "ProtocolMin": 1,
    "ProtocolMax": 2,
    "ProtocolCur": 2,
    "DelegateMin": 2,
    "DelegateMax": 4,
    "DelegateCur": 4
  }
}
```

### <a name="agent_maintenance"></a> /v1/agent/maintenance

The node maintenance endpoint can place the agent into "maintenance mode".
During maintenance mode, the node will be marked as unavailable and will not be
present in DNS or API queries. This API call is idempotent. Maintenance mode is
persistent and will be automatically restored on agent restart.

The `?enable` flag is required.  Acceptable values are either `true` (to enter
maintenance mode) or `false` (to resume normal operation).

The `?reason` flag is optional.  If provided, its value should be a text string
explaining the reason for placing the node into maintenance mode. This is simply
to aid human operators. If no reason is provided, a default value will be used instead.

The return code is 200 on success.

### <a name="agent_join"></a> /v1/agent/join/\<address\>

This endpoint is hit with a GET and is used to instruct the agent to attempt to
connect to a given address.  For agents running in server mode, providing a "?wan=1"
query parameter causes the agent to attempt to join using the WAN pool.

The return code is 200 on success.

### <a name="agent_force_leave"></a> /v1/agent/force-leave/\<node\>

This endpoint is hit with a GET and is used to instruct the agent to force a node into the `left` state.
If a node fails unexpectedly, then it will be in a `failed` state. Once in the `failed` state, Consul will
attempt to reconnect, and the services and checks belonging to that node will not be
cleaned up. Forcing a node into the `left` state allows its old entries to be removed.

The endpoint always returns 200.

### <a name="agent_check_register"></a> /v1/agent/check/register

The register endpoint is used to add a new check to the local agent.
There is more documentation on checks [here](/docs/agent/checks.html).
Checks may be of script, HTTP, or TTL type. The agent is responsible for managing
the status of the check and keeping the Catalog in sync.

The register endpoint expects a JSON request body to be PUT. The request
body must look like:

```javascript
{
  "ID": "mem",
  "Name": "Memory utilization",
  "Notes": "Ensure we don't oversubscribe memory",
  "Script": "/usr/local/bin/check_mem.py",
  "HTTP": "http://example.com",
  "Interval": "10s",
  "TTL": "15s"
}
```

The `Name` field is mandatory, as is one of `Script`, `HTTP` or `TTL`.
`Script` and `HTTP` also require that `Interval` be set.

If an `ID` is not provided, it is set to `Name`. You cannot have duplicate
`ID` entries per agent, so it may be necessary to provide an `ID`.

The `Notes` field is not used internally by Consul and is meant to be human-readable.

If a `Script` is provided, the check type is a script, and Consul will
evaluate the script every `Interval` to update the status.

An `HTTP` check will perform an HTTP GET request against the value of `HTTP` (expected to
be a URL) every `Interval`. If the response is any `2xx` code, the check is `passing`.
If the response is `429 Too Many Requests`, the check is `warning`. Otherwise, the check
is `critical`.

If a `TTL` type is used, then the TTL update endpoint must be used periodically to update
the state of the check.

Optionally, a `ServiceID` can be provided to associate the registered check with an existing Service provided by the agent.

The return code is 200 on success.

### <a name="agent_check_deregister"></a> /v1/agent/check/deregister/\<checkId\>

This endpoint is used to remove a check from the local agent.
The `CheckID` must be passed on the path. The agent will take care
of deregistering the check from the Catalog.

The return code is 200 on success.

### <a name="agent_check_pass"></a> /v1/agent/check/pass/\<checkId\>

This endpoint is used with a check that is of the [TTL type](/docs/agent/checks.html).
When this endpoint is accessed via a GET, the status of the check is set to `passing`
and the TTL clock is reset.

The optional "?note=" query parameter can be used to associate a human-readable message 
with the status of the check.

The return code is 200 on success.

### <a name="agent_check_warn"></a> /v1/agent/check/warn/\<checkId\>

This endpoint is used with a check that is of the [TTL type](/docs/agent/checks.html).
When this endpoint is accessed via a GET, the status of the check is set to `warning`,
and the TTL clock is reset.

The optional "?note=" query parameter can be used to associate a human-readable message 
with the status of the check.

The return code is 200 on success.

### <a name="agent_check_fail"></a> /v1/agent/check/fail/\<checkId\>

This endpoint is used with a check that is of the [TTL type](/docs/agent/checks.html).
When this endpoint is accessed via a GET, the status of the check is set to `critical`,
and the TTL clock is reset.

The optional "?note=" query parameter can be used to associate a human-readable message 
with the status of the check.

The return code is 200 on success.

### <a name="agent_service_register"></a> /v1/agent/service/register

The register endpoint is used to add a new service, with an optional health check,
to the local agent. There is more documentation on services [here](/docs/agent/services.html).
The agent is responsible for managing the status of the service and keeping the Catalog in sync.

The register endpoint expects a JSON request body to be PUT. The request
body must look like:

```javascript
{
  "ID": "redis1",
  "Name": "redis",
  "Tags": [
    "master",
    "v1"
  ],
  "Address": "127.0.0.1",
  "Port": 8000,
  "Check": {
    "Script": "/usr/local/bin/check_redis.py",
    "HTTP": "http://localhost:5000/health",
    "Interval": "10s",
    "TTL": "15s"
  }
}
```

The `Name` field is mandatory,  If an `ID` is not provided, it is set to `Name`.
You cannot have duplicate `ID` entries per agent, so it may be necessary to provide an ID
in the case of a collision.

`Tags`, `Address`, `Port` and `Check` are optional.

`Address` will default to that of the agent if not provided.

If `Check` is provided, only one of `Script`, `HTTP`, or `TTL` should be specified.
`Script` and `HTTP` also require `Interval`. The created check will be named "service:\<ServiceId\>".
There is more information about checks [here](/docs/agent/checks.html).

The return code is 200 on success.

### <a name="agent_service_deregister"></a> /v1/agent/service/deregister/\<serviceId\>

The deregister endpoint is used to remove a service from the local agent.
The ServiceID must be passed after the slash. The agent will take care
of deregistering the service with the Catalog. If there is an associated
check, that is also deregistered.

The return code is 200 on success.

### <a name="agent_service_maintenance"></a> /v1/agent/service/maintenance/\<serviceId\>

The service maintenance endpoint allows placing a given service into
"maintenance mode". During maintenance mode, the service will be marked as
unavailable and will not be present in DNS or API queries. This API call is
idempotent. Maintenance mode is persistent and will be automatically restored
on agent restart.

The `?enable` flag is required.  Acceptable values are either `true` (to enter
maintenance mode) or `false` (to resume normal operation).

The `?reason` flag is optional.  If provided, its value should be a text string
explaining the reason for placing the service into maintenance mode. This is simply
to aid human operators. If no reason is provided, a default value will be used instead.

The return code is 200 on success.