consul/agent/xds/clusters.go

927 lines
31 KiB
Go
Raw Normal View History

package xds
import (
"errors"
"fmt"
"time"
envoy_cluster_v3 "github.com/envoyproxy/go-control-plane/envoy/config/cluster/v3"
envoy_core_v3 "github.com/envoyproxy/go-control-plane/envoy/config/core/v3"
envoy_endpoint_v3 "github.com/envoyproxy/go-control-plane/envoy/config/endpoint/v3"
envoy_tls_v3 "github.com/envoyproxy/go-control-plane/envoy/extensions/transport_sockets/tls/v3"
envoy_type_v3 "github.com/envoyproxy/go-control-plane/envoy/type/v3"
"github.com/golang/protobuf/jsonpb"
"github.com/golang/protobuf/proto"
"github.com/golang/protobuf/ptypes"
"github.com/golang/protobuf/ptypes/any"
"github.com/golang/protobuf/ptypes/wrappers"
"github.com/hashicorp/consul/agent/connect"
"github.com/hashicorp/consul/agent/proxycfg"
"github.com/hashicorp/consul/agent/structs"
)
// clustersFromSnapshot returns the xDS API representation of the "clusters" in the snapshot.
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) clustersFromSnapshot(cfgSnap *proxycfg.ConfigSnapshot) ([]proto.Message, error) {
if cfgSnap == nil {
return nil, errors.New("nil config given")
}
switch cfgSnap.Kind {
case structs.ServiceKindConnectProxy:
2020-03-27 21:57:16 +00:00
return s.clustersFromSnapshotConnectProxy(cfgSnap)
case structs.ServiceKindTerminatingGateway:
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
res, err := s.makeGatewayServiceClusters(cfgSnap, cfgSnap.TerminatingGateway.ServiceGroups, cfgSnap.TerminatingGateway.ServiceResolvers)
if err != nil {
return nil, err
}
return s.maybeInjectStubClusterForGateways(res)
case structs.ServiceKindMeshGateway:
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
res, err := s.clustersFromSnapshotMeshGateway(cfgSnap)
if err != nil {
return nil, err
}
return s.maybeInjectStubClusterForGateways(res)
case structs.ServiceKindIngressGateway:
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
res, err := s.clustersFromSnapshotIngressGateway(cfgSnap)
if err != nil {
return nil, err
}
return s.maybeInjectStubClusterForGateways(res)
default:
return nil, fmt.Errorf("Invalid service kind: %v", cfgSnap.Kind)
}
}
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) maybeInjectStubClusterForGateways(resources []proto.Message) ([]proto.Message, error) {
switch {
case !s.IncrementalXDS:
return resources, nil
case !s.ProxyFeatures.GatewaysNeedStubClusterWhenEmptyWithIncrementalXDS:
return resources, nil
case len(resources) > 0:
return resources, nil
}
// For more justification for this hacky fix, check the comments associated
// with s.ProxyFeatures.GatewaysNeedStubClusterWhenEmptyWithIncrementalXDS
const stubName = "consul-stub-cluster-working-around-envoy-bug-ignore"
return []proto.Message{
&envoy_cluster_v3.Cluster{
Name: stubName,
ConnectTimeout: ptypes.DurationProto(5 * time.Second),
ClusterDiscoveryType: &envoy_cluster_v3.Cluster_Type{Type: envoy_cluster_v3.Cluster_STATIC},
LoadAssignment: &envoy_endpoint_v3.ClusterLoadAssignment{
ClusterName: stubName,
Endpoints: []*envoy_endpoint_v3.LocalityLbEndpoints{
{LbEndpoints: []*envoy_endpoint_v3.LbEndpoint{}},
},
},
},
}, nil
}
// clustersFromSnapshot returns the xDS API representation of the "clusters"
// (upstreams) in the snapshot.
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) clustersFromSnapshotConnectProxy(cfgSnap *proxycfg.ConfigSnapshot) ([]proto.Message, error) {
2021-03-17 19:40:49 +00:00
// This sizing is a lower bound.
clusters := make([]proto.Message, 0, len(cfgSnap.ConnectProxy.DiscoveryChain)+1)
// Include the "app" cluster for the public listener
appCluster, err := s.makeAppCluster(cfgSnap, LocalAppClusterName, "", cfgSnap.Proxy.LocalServicePort)
if err != nil {
return nil, err
}
clusters = append(clusters, appCluster)
if cfgSnap.Proxy.Mode == structs.ProxyModeTransparent {
passthroughs, err := makePassthroughClusters(cfgSnap)
if err != nil {
return nil, fmt.Errorf("failed to make passthrough clusters for transparent proxy: %v", err)
}
clusters = append(clusters, passthroughs...)
2021-03-17 19:40:49 +00:00
}
2021-03-17 19:40:49 +00:00
for id, chain := range cfgSnap.ConnectProxy.DiscoveryChain {
chainEndpoints, ok := cfgSnap.ConnectProxy.WatchedUpstreamEndpoints[id]
if !ok {
// this should not happen
return nil, fmt.Errorf("no endpoint map for upstream %q", id)
}
2021-03-17 19:40:49 +00:00
upstreamClusters, err := s.makeUpstreamClustersForDiscoveryChain(id, cfgSnap.ConnectProxy.UpstreamConfig[id], chain, chainEndpoints, cfgSnap)
if err != nil {
return nil, err
}
2021-03-17 19:40:49 +00:00
for _, cluster := range upstreamClusters {
clusters = append(clusters, cluster)
}
}
2021-03-17 19:40:49 +00:00
for _, u := range cfgSnap.Proxy.Upstreams {
if u.DestinationType != structs.UpstreamDestTypePreparedQuery {
continue
}
2021-03-17 19:40:49 +00:00
upstreamCluster, err := s.makeUpstreamClusterForPreparedQuery(u, cfgSnap)
if err != nil {
return nil, err
}
clusters = append(clusters, upstreamCluster)
}
cfgSnap.Proxy.Expose.Finalize()
paths := cfgSnap.Proxy.Expose.Paths
// Add service health checks to the list of paths to create clusters for if needed
if cfgSnap.Proxy.Expose.Checks {
psid := structs.NewServiceID(cfgSnap.Proxy.DestinationServiceID, &cfgSnap.ProxyID.EnterpriseMeta)
for _, check := range s.CheckFetcher.ServiceHTTPBasedChecks(psid) {
p, err := parseCheckPath(check)
if err != nil {
s.Logger.Warn("failed to create cluster for", "check", check.CheckID, "error", err)
continue
}
paths = append(paths, p)
}
}
// Create a new cluster if we need to expose a port that is different from the service port
for _, path := range paths {
if path.LocalPathPort == cfgSnap.Proxy.LocalServicePort {
continue
}
c, err := s.makeAppCluster(cfgSnap, makeExposeClusterName(path.LocalPathPort), path.Protocol, path.LocalPathPort)
if err != nil {
s.Logger.Warn("failed to make local cluster", "path", path.Path, "error", err)
continue
}
clusters = append(clusters, c)
}
return clusters, nil
}
func makeExposeClusterName(destinationPort int) string {
return fmt.Sprintf("exposed_cluster_%d", destinationPort)
}
// In transparent proxy mode there are potentially multiple passthrough clusters added.
// The first is for destinations outside of Consul's catalog. This is for a plain TCP proxy.
// All of these use Envoy's ORIGINAL_DST listener filter, which forwards to the original
// destination address (before the iptables redirection).
// The rest are for destinations inside the mesh, which require certificates for mTLS.
func makePassthroughClusters(cfgSnap *proxycfg.ConfigSnapshot) ([]proto.Message, error) {
// This size is an upper bound.
clusters := make([]proto.Message, 0, len(cfgSnap.ConnectProxy.PassthroughUpstreams)+1)
if cfgSnap.ConnectProxy.MeshConfig == nil ||
!cfgSnap.ConnectProxy.MeshConfig.TransparentProxy.CatalogDestinationsOnly {
clusters = append(clusters, &envoy_cluster_v3.Cluster{
Name: OriginalDestinationClusterName,
ClusterDiscoveryType: &envoy_cluster_v3.Cluster_Type{
Type: envoy_cluster_v3.Cluster_ORIGINAL_DST,
},
LbPolicy: envoy_cluster_v3.Cluster_CLUSTER_PROVIDED,
ConnectTimeout: ptypes.DurationProto(5 * time.Second),
})
}
for _, passthrough := range cfgSnap.ConnectProxy.PassthroughUpstreams {
// Prefixed with passthrough to distinguish from non-passthrough clusters for the same upstream.
name := "passthrough~" + passthrough.SNI
c := envoy_cluster_v3.Cluster{
Name: name,
ClusterDiscoveryType: &envoy_cluster_v3.Cluster_Type{
Type: envoy_cluster_v3.Cluster_ORIGINAL_DST,
},
LbPolicy: envoy_cluster_v3.Cluster_CLUSTER_PROVIDED,
// TODO(tproxy) This should use the connection timeout configured on the upstream's config entry
ConnectTimeout: ptypes.DurationProto(5 * time.Second),
}
tlsContext := envoy_tls_v3.UpstreamTlsContext{
CommonTlsContext: makeCommonTLSContextFromLeaf(cfgSnap, cfgSnap.Leaf()),
Sni: passthrough.SNI,
}
transportSocket, err := makeUpstreamTLSTransportSocket(&tlsContext)
if err != nil {
return nil, err
}
c.TransportSocket = transportSocket
clusters = append(clusters, &c)
}
return clusters, nil
}
// clustersFromSnapshotMeshGateway returns the xDS API representation of the "clusters"
// for a mesh gateway. This will include 1 cluster per remote datacenter as well as
// 1 cluster for each service subset.
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) clustersFromSnapshotMeshGateway(cfgSnap *proxycfg.ConfigSnapshot) ([]proto.Message, error) {
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
datacenters := cfgSnap.MeshGateway.Datacenters()
// 1 cluster per remote dc + 1 cluster per local service (this is a lower bound - all subset specific clusters will be appended)
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
clusters := make([]proto.Message, 0, len(datacenters)+len(cfgSnap.MeshGateway.ServiceGroups))
// generate the remote dc clusters
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
for _, dc := range datacenters {
if dc == cfgSnap.Datacenter {
continue // skip local
}
opts := gatewayClusterOpts{
name: connect.DatacenterSNI(dc, cfgSnap.Roots.TrustDomain),
hostnameEndpoints: cfgSnap.MeshGateway.HostnameDatacenters[dc],
isRemote: dc != cfgSnap.Datacenter,
}
cluster := s.makeGatewayCluster(cfgSnap, opts)
clusters = append(clusters, cluster)
}
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
if cfgSnap.ServiceMeta[structs.MetaWANFederationKey] == "1" && cfgSnap.ServerSNIFn != nil {
// Add all of the remote wildcard datacenter mappings for servers.
for _, dc := range datacenters {
hostnameEndpoints := cfgSnap.MeshGateway.HostnameDatacenters[dc]
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
// If the DC is our current DC then this cluster is for traffic from a remote DC to a local server.
// HostnameDatacenters is populated with gateway addresses, so it does not apply here.
if dc == cfgSnap.Datacenter {
hostnameEndpoints = nil
}
opts := gatewayClusterOpts{
name: cfgSnap.ServerSNIFn(dc, ""),
hostnameEndpoints: hostnameEndpoints,
isRemote: dc != cfgSnap.Datacenter,
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
}
cluster := s.makeGatewayCluster(cfgSnap, opts)
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
clusters = append(clusters, cluster)
}
// And for the current datacenter, send all flavors appropriately.
for _, srv := range cfgSnap.MeshGateway.ConsulServers {
opts := gatewayClusterOpts{
name: cfgSnap.ServerSNIFn(cfgSnap.Datacenter, srv.Node.Node),
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
}
cluster := s.makeGatewayCluster(cfgSnap, opts)
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
clusters = append(clusters, cluster)
}
}
2020-04-14 14:59:23 +00:00
// generate the per-service/subset clusters
2020-09-11 16:49:26 +00:00
c, err := s.makeGatewayServiceClusters(cfgSnap, cfgSnap.MeshGateway.ServiceGroups, cfgSnap.MeshGateway.ServiceResolvers)
2020-04-14 14:59:23 +00:00
if err != nil {
return nil, err
}
clusters = append(clusters, c...)
return clusters, nil
}
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) makeGatewayServiceClusters(
2020-09-11 16:49:26 +00:00
cfgSnap *proxycfg.ConfigSnapshot,
services map[structs.ServiceName]structs.CheckServiceNodes,
resolvers map[structs.ServiceName]*structs.ServiceResolverConfigEntry,
) ([]proto.Message, error) {
var hostnameEndpoints structs.CheckServiceNodes
switch cfgSnap.Kind {
2020-09-11 16:49:26 +00:00
case structs.ServiceKindTerminatingGateway, structs.ServiceKindMeshGateway:
default:
return nil, fmt.Errorf("unsupported gateway kind %q", cfgSnap.Kind)
}
2020-04-14 14:59:23 +00:00
clusters := make([]proto.Message, 0, len(services))
for svc := range services {
clusterName := connect.ServiceSNI(svc.Name, "", svc.NamespaceOrDefault(), cfgSnap.Datacenter, cfgSnap.Roots.TrustDomain)
2020-04-14 14:59:23 +00:00
resolver, hasResolver := resolvers[svc]
2020-09-11 15:21:43 +00:00
var loadBalancer *structs.LoadBalancer
2020-08-28 20:27:40 +00:00
if !hasResolver {
// Use a zero value resolver with no timeout and no subsets
resolver = &structs.ServiceResolverConfigEntry{}
}
if resolver.LoadBalancer != nil {
2020-09-11 15:21:43 +00:00
loadBalancer = resolver.LoadBalancer
}
// When making service clusters we only pass endpoints with hostnames if the kind is a terminating gateway
// This is because the services a mesh gateway will route to are not external services and are not addressed by a hostname.
if cfgSnap.Kind == structs.ServiceKindTerminatingGateway {
hostnameEndpoints = cfgSnap.TerminatingGateway.HostnameServices[svc]
}
opts := gatewayClusterOpts{
name: clusterName,
hostnameEndpoints: hostnameEndpoints,
connectTimeout: resolver.ConnectTimeout,
}
cluster := s.makeGatewayCluster(cfgSnap, opts)
2020-09-11 16:49:26 +00:00
if err := s.injectGatewayServiceAddons(cfgSnap, cluster, svc, loadBalancer); err != nil {
return nil, err
}
clusters = append(clusters, cluster)
// If there is a service-resolver for this service then also setup a cluster for each subset
for name, subset := range resolver.Subsets {
subsetHostnameEndpoints, err := s.filterSubsetEndpoints(&subset, hostnameEndpoints)
if err != nil {
return nil, err
}
opts := gatewayClusterOpts{
name: connect.ServiceSNI(svc.Name, name, svc.NamespaceOrDefault(), cfgSnap.Datacenter, cfgSnap.Roots.TrustDomain),
hostnameEndpoints: subsetHostnameEndpoints,
onlyPassing: subset.OnlyPassing,
connectTimeout: resolver.ConnectTimeout,
}
cluster := s.makeGatewayCluster(cfgSnap, opts)
2020-09-11 16:49:26 +00:00
if err := s.injectGatewayServiceAddons(cfgSnap, cluster, svc, loadBalancer); err != nil {
return nil, err
}
clusters = append(clusters, cluster)
}
}
return clusters, nil
}
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) injectGatewayServiceAddons(cfgSnap *proxycfg.ConfigSnapshot, c *envoy_cluster_v3.Cluster, svc structs.ServiceName, lb *structs.LoadBalancer) error {
2020-09-11 16:49:26 +00:00
switch cfgSnap.Kind {
case structs.ServiceKindMeshGateway:
// We can't apply hash based LB config to mesh gateways because they rely on inspecting HTTP attributes
// and mesh gateways do not decrypt traffic
if !lb.IsHashBased() {
if err := injectLBToCluster(lb, c); err != nil {
return fmt.Errorf("failed to apply load balancer configuration to cluster %q: %v", c.Name, err)
}
}
case structs.ServiceKindTerminatingGateway:
// Context used for TLS origination to the cluster
if mapping, ok := cfgSnap.TerminatingGateway.GatewayServices[svc]; ok && mapping.CAFile != "" {
tlsContext := &envoy_tls_v3.UpstreamTlsContext{
2020-09-11 16:49:26 +00:00
CommonTlsContext: makeCommonTLSContextFromFiles(mapping.CAFile, mapping.CertFile, mapping.KeyFile),
}
if mapping.SNI != "" {
tlsContext.Sni = mapping.SNI
}
transportSocket, err := makeUpstreamTLSTransportSocket(tlsContext)
if err != nil {
return err
2020-09-11 16:49:26 +00:00
}
c.TransportSocket = transportSocket
2020-09-11 16:49:26 +00:00
}
if err := injectLBToCluster(lb, c); err != nil {
return fmt.Errorf("failed to apply load balancer configuration to cluster %q: %v", c.Name, err)
}
}
return nil
}
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) clustersFromSnapshotIngressGateway(cfgSnap *proxycfg.ConfigSnapshot) ([]proto.Message, error) {
var clusters []proto.Message
createdClusters := make(map[string]bool)
for _, upstreams := range cfgSnap.IngressGateway.Upstreams {
for _, u := range upstreams {
id := u.Identifier()
// If we've already created a cluster for this upstream, skip it. Multiple listeners may
// reference the same upstream, so we don't need to create duplicate clusters in that case.
if createdClusters[id] {
continue
}
chain, ok := cfgSnap.IngressGateway.DiscoveryChain[id]
if !ok {
// this should not happen
return nil, fmt.Errorf("no discovery chain for upstream %q", id)
}
chainEndpoints, ok := cfgSnap.IngressGateway.WatchedUpstreamEndpoints[id]
if !ok {
// this should not happen
return nil, fmt.Errorf("no endpoint map for upstream %q", id)
}
2021-03-17 19:40:49 +00:00
upstreamClusters, err := s.makeUpstreamClustersForDiscoveryChain(id, &u, chain, chainEndpoints, cfgSnap)
if err != nil {
return nil, err
}
for _, c := range upstreamClusters {
clusters = append(clusters, c)
}
createdClusters[id] = true
}
}
return clusters, nil
}
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) makeAppCluster(cfgSnap *proxycfg.ConfigSnapshot, name, pathProtocol string, port int) (*envoy_cluster_v3.Cluster, error) {
var c *envoy_cluster_v3.Cluster
var err error
cfg, err := ParseProxyConfig(cfgSnap.Proxy.Config)
if err != nil {
// Don't hard fail on a config typo, just warn. The parse func returns
// default config if there is an error so it's safe to continue.
s.Logger.Warn("failed to parse Connect.Proxy.Config", "error", err)
}
// If we have overridden local cluster config try to parse it into an Envoy cluster
if cfg.LocalClusterJSON != "" {
return makeClusterFromUserConfig(cfg.LocalClusterJSON)
}
var endpoint *envoy_endpoint_v3.LbEndpoint
if cfgSnap.Proxy.LocalServiceSocketPath != "" {
endpoint = makePipeEndpoint(cfgSnap.Proxy.LocalServiceSocketPath)
} else {
addr := cfgSnap.Proxy.LocalServiceAddress
if addr == "" {
addr = "127.0.0.1"
}
endpoint = makeEndpoint(addr, port)
}
c = &envoy_cluster_v3.Cluster{
Name: name,
ConnectTimeout: ptypes.DurationProto(time.Duration(cfg.LocalConnectTimeoutMs) * time.Millisecond),
ClusterDiscoveryType: &envoy_cluster_v3.Cluster_Type{Type: envoy_cluster_v3.Cluster_STATIC},
LoadAssignment: &envoy_endpoint_v3.ClusterLoadAssignment{
ClusterName: name,
Endpoints: []*envoy_endpoint_v3.LocalityLbEndpoints{
{
LbEndpoints: []*envoy_endpoint_v3.LbEndpoint{
endpoint,
},
},
},
},
}
protocol := pathProtocol
if protocol == "" {
protocol = cfg.Protocol
}
if protocol == "http2" || protocol == "grpc" {
c.Http2ProtocolOptions = &envoy_core_v3.Http2ProtocolOptions{}
}
return c, err
}
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) makeUpstreamClusterForPreparedQuery(upstream structs.Upstream, cfgSnap *proxycfg.ConfigSnapshot) (*envoy_cluster_v3.Cluster, error) {
var c *envoy_cluster_v3.Cluster
var err error
dc := upstream.Datacenter
if dc == "" {
dc = cfgSnap.Datacenter
}
sni := connect.UpstreamSNI(&upstream, "", dc, cfgSnap.Roots.TrustDomain)
cfg, err := structs.ParseUpstreamConfig(upstream.Config)
if err != nil {
// Don't hard fail on a config typo, just warn. The parse func returns
// default config if there is an error so it's safe to continue.
s.Logger.Warn("failed to parse", "upstream", upstream.Identifier(), "error", err)
}
if cfg.EnvoyClusterJSON != "" {
c, err = makeClusterFromUserConfig(cfg.EnvoyClusterJSON)
if err != nil {
return c, err
}
// In the happy path don't return yet as we need to inject TLS config still.
}
if c == nil {
c = &envoy_cluster_v3.Cluster{
Name: sni,
ConnectTimeout: ptypes.DurationProto(time.Duration(cfg.ConnectTimeoutMs) * time.Millisecond),
ClusterDiscoveryType: &envoy_cluster_v3.Cluster_Type{Type: envoy_cluster_v3.Cluster_EDS},
EdsClusterConfig: &envoy_cluster_v3.Cluster_EdsClusterConfig{
EdsConfig: &envoy_core_v3.ConfigSource{
ResourceApiVersion: envoy_core_v3.ApiVersion_V3,
ConfigSourceSpecifier: &envoy_core_v3.ConfigSource_Ads{
Ads: &envoy_core_v3.AggregatedConfigSource{},
},
},
},
CircuitBreakers: &envoy_cluster_v3.CircuitBreakers{
Thresholds: makeThresholdsIfNeeded(cfg.Limits),
},
OutlierDetection: ToOutlierDetection(cfg.PassiveHealthCheck),
}
if cfg.Protocol == "http2" || cfg.Protocol == "grpc" {
c.Http2ProtocolOptions = &envoy_core_v3.Http2ProtocolOptions{}
}
}
// Enable TLS upstream with the configured client certificate.
tlsContext := &envoy_tls_v3.UpstreamTlsContext{
CommonTlsContext: makeCommonTLSContextFromLeaf(cfgSnap, cfgSnap.Leaf()),
Sni: sni,
}
transportSocket, err := makeUpstreamTLSTransportSocket(tlsContext)
if err != nil {
return nil, err
}
c.TransportSocket = transportSocket
return c, nil
}
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) makeUpstreamClustersForDiscoveryChain(
2021-03-17 19:40:49 +00:00
id string,
upstream *structs.Upstream,
chain *structs.CompiledDiscoveryChain,
chainEndpoints map[string]structs.CheckServiceNodes,
cfgSnap *proxycfg.ConfigSnapshot,
) ([]*envoy_cluster_v3.Cluster, error) {
if chain == nil {
2021-03-17 19:40:49 +00:00
return nil, fmt.Errorf("cannot create upstream cluster without discovery chain for %s", id)
}
2021-03-17 19:40:49 +00:00
configMap := make(map[string]interface{})
if upstream != nil {
configMap = upstream.Config
}
cfg, err := structs.ParseUpstreamConfigNoDefaults(configMap)
if err != nil {
// Don't hard fail on a config typo, just warn. The parse func returns
// default config if there is an error so it's safe to continue.
s.Logger.Warn("failed to parse", "upstream", id,
"error", err)
}
var escapeHatchCluster *envoy_cluster_v3.Cluster
if cfg.EnvoyClusterJSON != "" {
if chain.IsDefault() {
// If you haven't done anything to setup the discovery chain, then
// you can use the envoy_cluster_json escape hatch.
escapeHatchCluster, err = makeClusterFromUserConfig(cfg.EnvoyClusterJSON)
if err != nil {
return nil, err
}
} else {
2020-08-28 20:27:40 +00:00
s.Logger.Warn("ignoring escape hatch setting, because a discovery chain is configured for",
"discovery chain", chain.ServiceName, "upstream", id,
"envoy_cluster_json", chain.ServiceName)
}
}
var out []*envoy_cluster_v3.Cluster
for _, node := range chain.Nodes {
if node.Type != structs.DiscoveryGraphNodeTypeResolver {
continue
}
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
2019-08-05 18:30:35 +00:00
failover := node.Resolver.Failover
targetID := node.Resolver.Target
target := chain.Targets[targetID]
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
2019-08-05 18:30:35 +00:00
// Determine if we have to generate the entire cluster differently.
failoverThroughMeshGateway := chain.WillFailoverThroughMeshGateway(node)
sni := target.SNI
clusterName := CustomizeClusterName(target.Name, chain)
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
2019-08-05 18:30:35 +00:00
if failoverThroughMeshGateway {
actualTargetID := firstHealthyTarget(
chain.Targets,
chainEndpoints,
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
2019-08-05 18:30:35 +00:00
targetID,
failover.Targets,
)
if actualTargetID != targetID {
actualTarget := chain.Targets[actualTargetID]
sni = actualTarget.SNI
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
2019-08-05 18:30:35 +00:00
}
}
s.Logger.Debug("generating cluster for", "cluster", clusterName)
c := &envoy_cluster_v3.Cluster{
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
Name: clusterName,
AltStatName: clusterName,
ConnectTimeout: ptypes.DurationProto(node.Resolver.ConnectTimeout),
ClusterDiscoveryType: &envoy_cluster_v3.Cluster_Type{Type: envoy_cluster_v3.Cluster_EDS},
CommonLbConfig: &envoy_cluster_v3.Cluster_CommonLbConfig{
HealthyPanicThreshold: &envoy_type_v3.Percent{
Value: 0, // disable panic threshold
},
},
EdsClusterConfig: &envoy_cluster_v3.Cluster_EdsClusterConfig{
EdsConfig: &envoy_core_v3.ConfigSource{
ResourceApiVersion: envoy_core_v3.ApiVersion_V3,
ConfigSourceSpecifier: &envoy_core_v3.ConfigSource_Ads{
Ads: &envoy_core_v3.AggregatedConfigSource{},
},
},
},
CircuitBreakers: &envoy_cluster_v3.CircuitBreakers{
Thresholds: makeThresholdsIfNeeded(cfg.Limits),
},
OutlierDetection: ToOutlierDetection(cfg.PassiveHealthCheck),
}
2020-09-11 15:21:43 +00:00
var lb *structs.LoadBalancer
if node.LoadBalancer != nil {
2020-09-11 15:21:43 +00:00
lb = node.LoadBalancer
}
if err := injectLBToCluster(lb, c); err != nil {
return nil, fmt.Errorf("failed to apply load balancer configuration to cluster %q: %v", clusterName, err)
2020-08-28 20:27:40 +00:00
}
proto := cfg.Protocol
if proto == "" {
proto = chain.Protocol
}
if proto == "" {
proto = "tcp"
}
if proto == "http2" || proto == "grpc" {
c.Http2ProtocolOptions = &envoy_core_v3.Http2ProtocolOptions{}
}
// Enable TLS upstream with the configured client certificate.
tlsContext := &envoy_tls_v3.UpstreamTlsContext{
CommonTlsContext: makeCommonTLSContextFromLeaf(cfgSnap, cfgSnap.Leaf()),
Sni: sni,
}
transportSocket, err := makeUpstreamTLSTransportSocket(tlsContext)
if err != nil {
return nil, err
}
c.TransportSocket = transportSocket
out = append(out, c)
}
if escapeHatchCluster != nil {
if len(out) != 1 {
return nil, fmt.Errorf("cannot inject escape hatch cluster when discovery chain had no nodes")
}
defaultCluster := out[0]
// Overlay what the user provided.
escapeHatchCluster.TransportSocket = defaultCluster.TransportSocket
out = []*envoy_cluster_v3.Cluster{escapeHatchCluster}
}
return out, nil
}
// makeClusterFromUserConfig returns the listener config decoded from an
// arbitrary proto3 json format string or an error if it's invalid.
//
// For now we only support embedding in JSON strings because of the hcl parsing
// pain (see Background section in the comment for decode.HookWeakDecodeFromSlice).
// This may be fixed in decode.HookWeakDecodeFromSlice in the future.
//
// When we do that we can support just nesting the config directly into the
// JSON/hcl naturally but this is a stop-gap that gets us an escape hatch
// immediately. It's also probably not a bad thing to support long-term since
// any config generated by other systems will likely be in canonical protobuf
// from rather than our slight variant in JSON/hcl.
func makeClusterFromUserConfig(configJSON string) (*envoy_cluster_v3.Cluster, error) {
// Type field is present so decode it as a types.Any
var any any.Any
err := jsonpb.UnmarshalString(configJSON, &any)
if err != nil {
return nil, err
}
// And then unmarshal the listener again...
var c envoy_cluster_v3.Cluster
err = proto.Unmarshal(any.Value, &c)
if err != nil {
return nil, err
}
return &c, err
}
type gatewayClusterOpts struct {
// name for the cluster
name string
// isRemote determines whether the cluster is in a remote DC and we should prefer a WAN address
isRemote bool
// onlyPassing determines whether endpoints that do not have a passing status should be considered unhealthy
onlyPassing bool
// connectTimeout is the timeout for new network connections to hosts in the cluster
connectTimeout time.Duration
// hostnameEndpoints is a list of endpoints with a hostname as their address
hostnameEndpoints structs.CheckServiceNodes
}
// makeGatewayCluster creates an Envoy cluster for a mesh or terminating gateway
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
func (s *ResourceGenerator) makeGatewayCluster(snap *proxycfg.ConfigSnapshot, opts gatewayClusterOpts) *envoy_cluster_v3.Cluster {
cfg, err := ParseGatewayConfig(snap.Proxy.Config)
if err != nil {
// Don't hard fail on a config typo, just warn. The parse func returns
// default config if there is an error so it's safe to continue.
s.Logger.Warn("failed to parse gateway config", "error", err)
}
if opts.connectTimeout <= 0 {
opts.connectTimeout = time.Duration(cfg.ConnectTimeoutMs) * time.Millisecond
}
cluster := &envoy_cluster_v3.Cluster{
Name: opts.name,
ConnectTimeout: ptypes.DurationProto(opts.connectTimeout),
// Having an empty config enables outlier detection with default config.
OutlierDetection: &envoy_cluster_v3.OutlierDetection{},
}
useEDS := true
if len(opts.hostnameEndpoints) > 0 {
useEDS = false
}
// If none of the service instances are addressed by a hostname we provide the endpoint IP addresses via EDS
if useEDS {
cluster.ClusterDiscoveryType = &envoy_cluster_v3.Cluster_Type{Type: envoy_cluster_v3.Cluster_EDS}
cluster.EdsClusterConfig = &envoy_cluster_v3.Cluster_EdsClusterConfig{
EdsConfig: &envoy_core_v3.ConfigSource{
ResourceApiVersion: envoy_core_v3.ApiVersion_V3,
ConfigSourceSpecifier: &envoy_core_v3.ConfigSource_Ads{
Ads: &envoy_core_v3.AggregatedConfigSource{},
},
},
}
return cluster
}
// When a service instance is addressed by a hostname we have Envoy do the DNS resolution
// by setting a DNS cluster type and passing the hostname endpoints via CDS.
rate := 10 * time.Second
cluster.DnsRefreshRate = ptypes.DurationProto(rate)
cluster.DnsLookupFamily = envoy_cluster_v3.Cluster_V4_ONLY
discoveryType := envoy_cluster_v3.Cluster_Type{Type: envoy_cluster_v3.Cluster_LOGICAL_DNS}
if cfg.DNSDiscoveryType == "strict_dns" {
discoveryType.Type = envoy_cluster_v3.Cluster_STRICT_DNS
}
cluster.ClusterDiscoveryType = &discoveryType
endpoints := make([]*envoy_endpoint_v3.LbEndpoint, 0, 1)
uniqueHostnames := make(map[string]bool)
var (
hostname string
idx int
fallback *envoy_endpoint_v3.LbEndpoint
)
for i, e := range opts.hostnameEndpoints {
addr, port := e.BestAddress(opts.isRemote)
uniqueHostnames[addr] = true
health, weight := calculateEndpointHealthAndWeight(e, opts.onlyPassing)
if health == envoy_core_v3.HealthStatus_UNHEALTHY {
fallback = makeLbEndpoint(addr, port, health, weight)
continue
}
if len(endpoints) == 0 {
endpoints = append(endpoints, makeLbEndpoint(addr, port, health, weight))
hostname = addr
idx = i
break
}
}
dc := opts.hostnameEndpoints[idx].Node.Datacenter
service := opts.hostnameEndpoints[idx].Service.CompoundServiceName()
// Fall back to last unhealthy endpoint if none were healthy
if len(endpoints) == 0 {
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
s.Logger.Warn("upstream service does not contain any healthy instances",
"dc", dc, "service", service.String())
endpoints = append(endpoints, fallback)
}
if len(uniqueHostnames) > 1 {
Support Incremental xDS mode (#9855) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 18:54:05 +00:00
s.Logger.Warn(fmt.Sprintf("service contains instances with more than one unique hostname; only %q be resolved by Envoy", hostname),
"dc", dc, "service", service.String())
}
cluster.LoadAssignment = &envoy_endpoint_v3.ClusterLoadAssignment{
ClusterName: cluster.Name,
Endpoints: []*envoy_endpoint_v3.LocalityLbEndpoints{
{
LbEndpoints: endpoints,
},
},
}
return cluster
}
func makeThresholdsIfNeeded(limits *structs.UpstreamLimits) []*envoy_cluster_v3.CircuitBreakers_Thresholds {
if limits == nil {
return nil
}
threshold := &envoy_cluster_v3.CircuitBreakers_Thresholds{}
// Likewise, make sure to not set any threshold values on the zero-value in
// order to rely on Envoy defaults
if limits.MaxConnections != nil {
threshold.MaxConnections = makeUint32Value(*limits.MaxConnections)
}
if limits.MaxPendingRequests != nil {
threshold.MaxPendingRequests = makeUint32Value(*limits.MaxPendingRequests)
}
if limits.MaxConcurrentRequests != nil {
threshold.MaxRequests = makeUint32Value(*limits.MaxConcurrentRequests)
}
return []*envoy_cluster_v3.CircuitBreakers_Thresholds{threshold}
}
func makeLbEndpoint(addr string, port int, health envoy_core_v3.HealthStatus, weight int) *envoy_endpoint_v3.LbEndpoint {
return &envoy_endpoint_v3.LbEndpoint{
HostIdentifier: &envoy_endpoint_v3.LbEndpoint_Endpoint{
Endpoint: &envoy_endpoint_v3.Endpoint{
Address: &envoy_core_v3.Address{
Address: &envoy_core_v3.Address_SocketAddress{
SocketAddress: &envoy_core_v3.SocketAddress{
Address: addr,
PortSpecifier: &envoy_core_v3.SocketAddress_PortValue{
PortValue: uint32(port),
},
},
},
},
},
},
HealthStatus: health,
LoadBalancingWeight: makeUint32Value(weight),
}
}
func injectLBToCluster(ec *structs.LoadBalancer, c *envoy_cluster_v3.Cluster) error {
if ec == nil {
return nil
}
switch ec.Policy {
case "":
return nil
case structs.LBPolicyLeastRequest:
c.LbPolicy = envoy_cluster_v3.Cluster_LEAST_REQUEST
if ec.LeastRequestConfig != nil {
c.LbConfig = &envoy_cluster_v3.Cluster_LeastRequestLbConfig_{
LeastRequestLbConfig: &envoy_cluster_v3.Cluster_LeastRequestLbConfig{
ChoiceCount: &wrappers.UInt32Value{Value: ec.LeastRequestConfig.ChoiceCount},
},
}
}
case structs.LBPolicyRoundRobin:
c.LbPolicy = envoy_cluster_v3.Cluster_ROUND_ROBIN
case structs.LBPolicyRandom:
c.LbPolicy = envoy_cluster_v3.Cluster_RANDOM
case structs.LBPolicyRingHash:
c.LbPolicy = envoy_cluster_v3.Cluster_RING_HASH
if ec.RingHashConfig != nil {
c.LbConfig = &envoy_cluster_v3.Cluster_RingHashLbConfig_{
RingHashLbConfig: &envoy_cluster_v3.Cluster_RingHashLbConfig{
MinimumRingSize: &wrappers.UInt64Value{Value: ec.RingHashConfig.MinimumRingSize},
MaximumRingSize: &wrappers.UInt64Value{Value: ec.RingHashConfig.MaximumRingSize},
},
}
}
case structs.LBPolicyMaglev:
c.LbPolicy = envoy_cluster_v3.Cluster_MAGLEV
default:
return fmt.Errorf("unsupported load balancer policy %q for cluster %q", ec.Policy, c.Name)
}
return nil
}