consul/command/connect/envoy/bootstrap_config_test.go

1697 lines
64 KiB
Go
Raw Normal View History

// Copyright (c) HashiCorp, Inc.
// SPDX-License-Identifier: MPL-2.0
package envoy
import (
"encoding/json"
"reflect"
"regexp"
"strings"
"testing"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
const (
expectedSelfAdminCluster = `{
"name": "self_admin",
"ignore_health_on_host_removal": false,
"connect_timeout": "5s",
"type": "STATIC",
"http_protocol_options": {},
"loadAssignment": {
"clusterName": "self_admin",
"endpoints": [
{
"lbEndpoints": [
{
"endpoint": {
"address": {
"socket_address": {
"address": "127.0.0.1",
"port_value": 19000
}
}
}
}
]
}
]
}
}`
expectedSelfAdminClusterNonLoopbackIP = `{
"name": "self_admin",
"ignore_health_on_host_removal": false,
"connect_timeout": "5s",
"type": "STATIC",
"http_protocol_options": {},
"loadAssignment": {
"clusterName": "self_admin",
"endpoints": [
{
"lbEndpoints": [
{
"endpoint": {
"address": {
"socket_address": {
"address": "192.0.2.10",
"port_value": 19002
}
}
}
}
]
}
]
}
}`
expectedPrometheusBackendCluster = `{
"name": "prometheus_backend",
"ignore_health_on_host_removal": false,
"connect_timeout": "5s",
"type": "STATIC",
"http_protocol_options": {},
"loadAssignment": {
"clusterName": "prometheus_backend",
"endpoints": [
{
"lbEndpoints": [
{
"endpoint": {
"address": {
"socket_address": {
"address": "127.0.0.1",
"port_value": 20100
}
}
}
}
]
}
]
}
}`
expectedPromListener = `{
"name": "envoy_prometheus_metrics_listener",
"address": {
"socket_address": {
"address": "0.0.0.0",
"port_value": 9000
}
},
"filter_chains": [
{
"filters": [
{
"name": "envoy.filters.network.http_connection_manager",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager",
"stat_prefix": "envoy_prometheus_metrics",
"codec_type": "HTTP1",
"route_config": {
"name": "self_admin_route",
"virtual_hosts": [
{
"name": "self_admin",
"domains": [
"*"
],
"routes": [
{
"match": {
"path": "/metrics"
},
"route": {
"cluster": "self_admin",
"prefix_rewrite": "/stats/prometheus"
}
},
{
"match": {
"prefix": "/"
},
"direct_response": {
"status": 404
}
}
]
}
]
},
"http_filters": [
{
"name": "envoy.filters.http.router",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.http.router.v3.Router"
}
}
]
}
}
]
}
]
}`
expectedPromListenerCustomScrapePath = `{
"name": "envoy_prometheus_metrics_listener",
"address": {
"socket_address": {
"address": "0.0.0.0",
"port_value": 9000
}
},
"filter_chains": [
{
"filters": [
{
"name": "envoy.filters.network.http_connection_manager",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager",
"stat_prefix": "envoy_prometheus_metrics",
"codec_type": "HTTP1",
"route_config": {
"name": "self_admin_route",
"virtual_hosts": [
{
"name": "self_admin",
"domains": [
"*"
],
"routes": [
{
"match": {
"path": "/scrape-path"
},
"route": {
"cluster": "self_admin",
"prefix_rewrite": "/stats/prometheus"
}
},
{
"match": {
"prefix": "/"
},
"direct_response": {
"status": 404
}
}
]
}
]
},
"http_filters": [
{
"name": "envoy.filters.http.router",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.http.router.v3.Router"
}
}
]
}
}
]
}
]
}`
expectedPromListenerWithPrometheusBackendCluster = `{
"name": "envoy_prometheus_metrics_listener",
"address": {
"socket_address": {
"address": "0.0.0.0",
"port_value": 9000
}
},
"filter_chains": [
{
"filters": [
{
"name": "envoy.filters.network.http_connection_manager",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager",
"stat_prefix": "envoy_prometheus_metrics",
"codec_type": "HTTP1",
"route_config": {
"name": "self_admin_route",
"virtual_hosts": [
{
"name": "self_admin",
"domains": [
"*"
],
"routes": [
{
"match": {
"path": "/metrics"
},
"route": {
"cluster": "prometheus_backend",
"prefix_rewrite": "/stats/prometheus"
}
},
{
"match": {
"prefix": "/"
},
"direct_response": {
"status": 404
}
}
]
}
]
},
"http_filters": [
{
"name": "envoy.filters.http.router",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.http.router.v3.Router"
}
}
]
}
}
]
}
]
}`
expectedPromListenerWithBackendAndTLS = `{
"name": "envoy_prometheus_metrics_listener",
"address": {
"socket_address": {
"address": "0.0.0.0",
"port_value": 9000
}
},
"filter_chains": [
{
"filters": [
{
"name": "envoy.filters.network.http_connection_manager",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager",
"stat_prefix": "envoy_prometheus_metrics",
"codec_type": "HTTP1",
"route_config": {
"name": "self_admin_route",
"virtual_hosts": [
{
"name": "self_admin",
"domains": [
"*"
],
"routes": [
{
"match": {
"path": "/metrics"
},
"route": {
"cluster": "prometheus_backend",
"prefix_rewrite": "/stats/prometheus"
}
},
{
"match": {
"prefix": "/"
},
"direct_response": {
"status": 404
}
}
]
}
]
},
"http_filters": [
{
"name": "envoy.filters.http.router",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.http.router.v3.Router"
}
}
]
}
}
],
"transportSocket": {
"name": "tls",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.transport_sockets.tls.v3.DownstreamTlsContext",
"commonTlsContext": {
"tlsCertificateSdsSecretConfigs": [
{
"name": "prometheus_cert"
}
],
"validationContextSdsSecretConfig": {
"name": "prometheus_validation_context"
}
}
}
}
}
]
}`
expectedPromSecretsWithBackendAndTLS = `{
"name": "prometheus_cert",
"tlsCertificate": {
"certificateChain": {
"filename": "test-cert-file"
},
"privateKey": {
"filename": "test-key-file"
}
}
},
{
"name": "prometheus_validation_context",
"validationContext": {
"trustedCa": {
"filename": "test-ca-file"
}
}
}`
expectedPromSecretsWithBackendAndTLSCAPath = `{
"name": "prometheus_cert",
"tlsCertificate": {
"certificateChain": {
"filename": "test-cert-file"
},
"privateKey": {
"filename": "test-key-file"
}
}
},
{
"name": "prometheus_validation_context",
"validationContext": {
"watchedDirectory": {
"path": "test-ca-directory"
}
}
}`
expectedStatsListener = `{
"name": "envoy_metrics_listener",
"address": {
"socket_address": {
"address": "0.0.0.0",
"port_value": 9000
}
},
"filter_chains": [
{
"filters": [
{
"name": "envoy.filters.network.http_connection_manager",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager",
"stat_prefix": "envoy_metrics",
"codec_type": "HTTP1",
"route_config": {
"name": "self_admin_route",
"virtual_hosts": [
{
"name": "self_admin",
"domains": [
"*"
],
"routes": [
{
"match": {
"prefix": "/stats"
},
"route": {
"cluster": "self_admin",
"prefix_rewrite": "/stats"
}
},
{
"match": {
"prefix": "/"
},
"direct_response": {
"status": 404
}
}
]
}
]
},
"http_filters": [
{
"name": "envoy.filters.http.router",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.http.router.v3.Router"
}
}
]
}
}
]
}
]
}`
expectedReadyListener = `{
"name": "envoy_ready_listener",
"address": {
"socket_address": {
"address": "0.0.0.0",
"port_value": 4444
}
},
"filter_chains": [
{
"filters": [
{
"name": "envoy.filters.network.http_connection_manager",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager",
"stat_prefix": "envoy_ready",
"codec_type": "HTTP1",
"route_config": {
"name": "self_admin_route",
"virtual_hosts": [
{
"name": "self_admin",
"domains": [
"*"
],
"routes": [
{
"match": {
"path": "/ready"
},
"route": {
"cluster": "self_admin",
"prefix_rewrite": "/ready"
}
},
{
"match": {
"prefix": "/"
},
"direct_response": {
"status": 404
}
}
]
}
]
},
"http_filters": [
{
"name": "envoy.filters.http.router",
"typedConfig": {
"@type": "type.googleapis.com/envoy.extensions.filters.http.router.v3.Router"
}
}
]
}
}
]
}
]
}`
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
expectedStatsdSink = `{
"name": "envoy.stat_sinks.statsd",
"typedConfig": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.StatsdSink",
"address": {
"socket_address": {
"address": "127.0.0.1",
"port_value": 9125
}
}
}
}`
expectedTelemetryCollectorStatsSink = `{
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
"name": "envoy.stat_sinks.metrics_service",
"typed_config": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.MetricsServiceConfig",
"transport_api_version": "V3",
"grpc_service": {
"envoy_grpc": {
"cluster_name": "consul_telemetry_collector_loopback"
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}
},
"emit_tags_as_labels": true
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}
}`
expectedTelemetryCollectorCluster = `{
"name": "consul_telemetry_collector_loopback",
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
"type": "STATIC",
"http2_protocol_options": {},
"loadAssignment": {
"clusterName": "consul_telemetry_collector_loopback",
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
"endpoints": [
{
"lbEndpoints": [
{
"endpoint": {
"address": {
"pipe": {
"path": "/tmp/consul/telemetry-collector/gqmuzdHCUPAEY5mbF8vgkZCNI14.sock"
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}
}
}
}
]
}
]
}
}`
)
func TestBootstrapConfig_ConfigureArgs(t *testing.T) {
defaultTags, err := generateStatsTags(&BootstrapTplArgs{}, nil, false)
require.NoError(t, err)
defaultTagsJSON := strings.Join(defaultTags, ",\n")
defaultStatsConfigJSON := formatStatsTags(defaultTags)
// The updated tags exclude the ones deprecated in Consul 1.9
updatedTags, err := generateStatsTags(&BootstrapTplArgs{}, nil, true)
require.NoError(t, err)
updatedStatsConfigJSON := formatStatsTags(updatedTags)
tests := []struct {
name string
input BootstrapConfig
env []string
baseArgs BootstrapTplArgs
wantArgs BootstrapTplArgs
omitDeprecatedTags bool
wantErr bool
}{
{
name: "defaults",
input: BootstrapConfig{},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
},
wantErr: false,
},
{
name: "extra-stats-sinks",
input: BootstrapConfig{
StatsSinksJSON: `{
"name": "envoy.custom_exciting_sink",
"config": {
"foo": "bar"
}
}`,
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
StatsSinksJSON: `{
"name": "envoy.custom_exciting_sink",
"config": {
"foo": "bar"
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}`,
},
},
{
name: "telemetry-collector-sink",
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
baseArgs: BootstrapTplArgs{
ProxyID: "web-sidecar-proxy",
},
input: BootstrapConfig{
TelemetryCollectorBindSocketDir: "/tmp/consul/telemetry-collector",
},
wantArgs: BootstrapTplArgs{
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
ProxyID: "web-sidecar-proxy",
StatsConfigJSON: defaultStatsConfigJSON,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
StatsSinksJSON: `{
"name": "envoy.stat_sinks.metrics_service",
"typed_config": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.MetricsServiceConfig",
"transport_api_version": "V3",
"grpc_service": {
"envoy_grpc": {
"cluster_name": "consul_telemetry_collector_loopback"
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}
},
"emit_tags_as_labels": true
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}
}`,
StaticClustersJSON: `{
"name": "consul_telemetry_collector_loopback",
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
"type": "STATIC",
"http2_protocol_options": {},
"loadAssignment": {
"clusterName": "consul_telemetry_collector_loopback",
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
"endpoints": [
{
"lbEndpoints": [
{
"endpoint": {
"address": {
"pipe": {
"path": "/tmp/consul/telemetry-collector/gqmuzdHCUPAEY5mbF8vgkZCNI14.sock"
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}
}
}
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
]
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
]
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}`,
},
wantErr: false,
},
{
name: "simple-statsd-sink",
input: BootstrapConfig{
StatsdURL: "udp://127.0.0.1:9125",
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
StatsSinksJSON: expectedStatsdSink,
},
wantErr: false,
},
{
name: "simple-statsd-sink-plus-extra",
input: BootstrapConfig{
StatsdURL: "udp://127.0.0.1:9125",
StatsSinksJSON: `{
"name": "envoy.custom_exciting_sink",
"config": {
"foo": "bar"
}
}`,
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
StatsSinksJSON: `{
"name": "envoy.stat_sinks.statsd",
"typedConfig": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.StatsdSink",
"address": {
"socket_address": {
"address": "127.0.0.1",
"port_value": 9125
}
}
}
},
{
"name": "envoy.custom_exciting_sink",
"config": {
"foo": "bar"
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}`,
},
wantErr: false,
},
{
name: "simple-statsd-sink-env",
input: BootstrapConfig{
StatsdURL: "$MY_STATSD_URL",
},
env: []string{"MY_STATSD_URL=udp://127.0.0.1:9125"},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
StatsSinksJSON: `{
"name": "envoy.stat_sinks.statsd",
"typedConfig": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.StatsdSink",
"address": {
"socket_address": {
"address": "127.0.0.1",
"port_value": 9125
}
}
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}`,
},
wantErr: false,
},
{
name: "simple-statsd-sink-inline-env-allowed",
input: BootstrapConfig{
StatsdURL: "udp://$HOST_IP:9125",
},
env: []string{"HOST_IP=127.0.0.1"},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
StatsSinksJSON: `{
"name": "envoy.stat_sinks.statsd",
"typedConfig": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.StatsdSink",
"address": {
"socket_address": {
"address": "127.0.0.1",
"port_value": 9125
}
}
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}`,
},
wantErr: false,
},
{
name: "simple-statsd-sink-inline-env-disallowed",
input: BootstrapConfig{
StatsdURL: "udp://$HOST_ADDRESS:9125",
},
env: []string{"HOST_ADDRESS=127.0.0.1"},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
},
wantErr: true,
},
{
name: "simple-dogstatsd-sink",
input: BootstrapConfig{
DogstatsdURL: "udp://127.0.0.1:9125",
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
StatsSinksJSON: `{
"name": "envoy.stat_sinks.dog_statsd",
"typedConfig": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.DogStatsdSink",
"address": {
"socket_address": {
"address": "127.0.0.1",
"port_value": 9125
}
}
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}`,
},
wantErr: false,
},
{
name: "simple-dogstatsd-unix-sink",
input: BootstrapConfig{
DogstatsdURL: "unix:///var/run/dogstatsd.sock",
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
StatsSinksJSON: `{
"name": "envoy.stat_sinks.dog_statsd",
"typedConfig": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.DogStatsdSink",
"address": {
"pipe": {
"path": "/var/run/dogstatsd.sock"
}
}
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}`,
},
wantErr: false,
},
{
name: "simple-dogstatsd-sink-env",
input: BootstrapConfig{
DogstatsdURL: "$MY_STATSD_URL",
},
env: []string{"MY_STATSD_URL=udp://127.0.0.1:9125"},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
StatsSinksJSON: `{
"name": "envoy.stat_sinks.dog_statsd",
"typedConfig": {
"@type": "type.googleapis.com/envoy.config.metrics.v3.DogStatsdSink",
"address": {
"socket_address": {
"address": "127.0.0.1",
"port_value": 9125
}
}
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
}`,
},
wantErr: false,
},
{
name: "stats-config-override",
input: BootstrapConfig{
StatsConfigJSON: `{
"use_all_default_tags": true
}`,
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: `{
"use_all_default_tags": true
}`,
},
wantErr: false,
},
{
name: "simple-tags",
input: BootstrapConfig{
StatsTags: []string{"canary", "foo=bar", "baz=2"},
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: `{
"stats_tags": [
{
"tag_name": "canary",
"fixed_value": "1"
},
{
"tag_name": "foo",
"fixed_value": "bar"
},
{
"tag_name": "baz",
"fixed_value": "2"
},
` + defaultTagsJSON + `
],
"use_all_default_tags": true
}`,
},
wantErr: false,
},
{
name: "prometheus-bind-addr",
input: BootstrapConfig{
PrometheusBindAddr: "0.0.0.0:9000",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
PrometheusScrapePath: "/metrics",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should add a static cluster for the self-proxy to admin
StaticClustersJSON: expectedSelfAdminCluster,
// Should add a static http listener too
StaticListenersJSON: expectedPromListener,
StatsConfigJSON: defaultStatsConfigJSON,
PrometheusScrapePath: "/metrics",
},
wantErr: false,
},
{
name: "prometheus-bind-addr-non-loopback-ip",
input: BootstrapConfig{
PrometheusBindAddr: "0.0.0.0:9000",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "192.0.2.10",
AdminBindPort: "19002",
PrometheusScrapePath: "/metrics",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "192.0.2.10",
AdminBindPort: "19002",
// Should add a static cluster for the self-proxy to admin
StaticClustersJSON: expectedSelfAdminClusterNonLoopbackIP,
// Should add a static http listener too
StaticListenersJSON: expectedPromListener,
StatsConfigJSON: defaultStatsConfigJSON,
PrometheusScrapePath: "/metrics",
},
wantErr: false,
},
{
name: "prometheus-bind-addr-with-overrides",
input: BootstrapConfig{
PrometheusBindAddr: "0.0.0.0:9000",
StaticClustersJSON: `{"foo":"bar"}`,
StaticListenersJSON: `{"baz":"qux"}`,
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
PrometheusScrapePath: "/scrape-path",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should add a static cluster for the self-proxy to admin
StaticClustersJSON: `{"foo":"bar"},` + expectedSelfAdminCluster,
// Should add a static http listener too
StaticListenersJSON: `{"baz":"qux"},` + expectedPromListenerCustomScrapePath,
StatsConfigJSON: defaultStatsConfigJSON,
PrometheusScrapePath: "/scrape-path",
},
wantErr: false,
},
{
name: "prometheus-bind-addr-with-prometheus-backend",
input: BootstrapConfig{
PrometheusBindAddr: "0.0.0.0:9000",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
PrometheusBackendPort: "20100",
PrometheusScrapePath: "/metrics",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should use the "prometheus_backend" cluster instead, which
// uses the PrometheusBackendPort rather than Envoy admin port
StaticClustersJSON: expectedPrometheusBackendCluster,
StaticListenersJSON: expectedPromListenerWithPrometheusBackendCluster,
StatsConfigJSON: defaultStatsConfigJSON,
PrometheusBackendPort: "20100",
PrometheusScrapePath: "/metrics",
},
wantErr: false,
},
{
name: "prometheus-bind-addr-with-backend-and-tls",
input: BootstrapConfig{
PrometheusBindAddr: "0.0.0.0:9000",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
PrometheusBackendPort: "20100",
PrometheusScrapePath: "/metrics",
PrometheusCAFile: "test-ca-file",
PrometheusCertFile: "test-cert-file",
PrometheusKeyFile: "test-key-file",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should use the "prometheus_backend" cluster instead, which
// uses the PrometheusBackendPort rather than Envoy admin port
StaticClustersJSON: expectedPrometheusBackendCluster,
StaticListenersJSON: expectedPromListenerWithBackendAndTLS,
StaticSecretsJSON: expectedPromSecretsWithBackendAndTLS,
StatsConfigJSON: defaultStatsConfigJSON,
PrometheusBackendPort: "20100",
PrometheusScrapePath: "/metrics",
PrometheusCAFile: "test-ca-file",
PrometheusCertFile: "test-cert-file",
PrometheusKeyFile: "test-key-file",
},
wantErr: false,
},
{
name: "prometheus-bind-addr-with-backend-and-tls-ca-path",
input: BootstrapConfig{
PrometheusBindAddr: "0.0.0.0:9000",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
PrometheusBackendPort: "20100",
PrometheusScrapePath: "/metrics",
PrometheusCAPath: "test-ca-directory",
PrometheusCertFile: "test-cert-file",
PrometheusKeyFile: "test-key-file",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should use the "prometheus_backend" cluster instead, which
// uses the PrometheusBackendPort rather than Envoy admin port
StaticClustersJSON: expectedPrometheusBackendCluster,
StaticListenersJSON: expectedPromListenerWithBackendAndTLS,
StaticSecretsJSON: expectedPromSecretsWithBackendAndTLSCAPath,
StatsConfigJSON: defaultStatsConfigJSON,
PrometheusBackendPort: "20100",
PrometheusScrapePath: "/metrics",
PrometheusCAPath: "test-ca-directory",
PrometheusCertFile: "test-cert-file",
PrometheusKeyFile: "test-key-file",
},
wantErr: false,
},
{
name: "stats-bind-addr",
input: BootstrapConfig{
StatsBindAddr: "0.0.0.0:9000",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should add a static cluster for the self-proxy to admin
StaticClustersJSON: expectedSelfAdminCluster,
// Should add a static http listener too
StaticListenersJSON: expectedStatsListener,
StatsConfigJSON: defaultStatsConfigJSON,
},
wantErr: false,
},
{
name: "stats-bind-addr-with-overrides",
input: BootstrapConfig{
StatsBindAddr: "0.0.0.0:9000",
StaticClustersJSON: `{"foo":"bar"}`,
StaticListenersJSON: `{"baz":"qux"}`,
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should add a static cluster for the self-proxy to admin
StaticClustersJSON: `{"foo":"bar"},` + expectedSelfAdminCluster,
// Should add a static http listener too
StaticListenersJSON: `{"baz":"qux"},` + expectedStatsListener,
StatsConfigJSON: defaultStatsConfigJSON,
},
wantErr: false,
},
{
name: "stats-flush-interval",
input: BootstrapConfig{
StatsFlushInterval: `10s`,
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
StatsFlushInterval: `10s`,
},
wantErr: false,
},
{
name: "override-tracing",
input: BootstrapConfig{
TracingConfigJSON: `{"foo": "bar"}`,
},
wantArgs: BootstrapTplArgs{
StatsConfigJSON: defaultStatsConfigJSON,
TracingConfigJSON: `{"foo": "bar"}`,
},
wantErr: false,
},
{
name: "err-bad-prometheus-addr",
input: BootstrapConfig{
PrometheusBindAddr: "asdasdsad",
},
wantErr: true,
},
{
name: "err-bad-stats-addr",
input: BootstrapConfig{
StatsBindAddr: "asdasdsad",
},
wantErr: true,
},
{
name: "err-bad-statsd-addr",
input: BootstrapConfig{
StatsdURL: "asdasdsad",
},
wantErr: true,
},
{
name: "err-bad-dogstatsd-addr",
input: BootstrapConfig{
DogstatsdURL: "asdasdsad",
},
wantErr: true,
},
{
name: "ready-bind-addr",
input: BootstrapConfig{
ReadyBindAddr: "0.0.0.0:4444",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should add a static cluster for the self-proxy to admin
StaticClustersJSON: expectedSelfAdminCluster,
// Should add a static http listener too
StaticListenersJSON: expectedReadyListener,
StatsConfigJSON: defaultStatsConfigJSON,
},
wantErr: false,
},
{
name: "ready-bind-addr-with-overrides",
input: BootstrapConfig{
ReadyBindAddr: "0.0.0.0:4444",
StaticClustersJSON: `{"foo":"bar"}`,
StaticListenersJSON: `{"baz":"qux"}`,
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should add a static cluster for the self-proxy to admin
StaticClustersJSON: `{"foo":"bar"},` + expectedSelfAdminCluster,
// Should add a static http listener too
StaticListenersJSON: `{"baz":"qux"},` + expectedReadyListener,
StatsConfigJSON: defaultStatsConfigJSON,
},
wantErr: false,
},
{
name: "ready-bind-addr-and-prometheus-and-stats",
input: BootstrapConfig{
ReadyBindAddr: "0.0.0.0:4444",
PrometheusBindAddr: "0.0.0.0:9000",
StatsBindAddr: "0.0.0.0:9000",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
PrometheusScrapePath: "/metrics",
},
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
// Should add a static cluster for the self-proxy to admin
StaticClustersJSON: expectedSelfAdminCluster,
// Should add a static http listener too
StaticListenersJSON: strings.Join(
[]string{expectedPromListener, expectedStatsListener, expectedReadyListener},
", ",
),
StatsConfigJSON: defaultStatsConfigJSON,
PrometheusScrapePath: "/metrics",
},
wantErr: false,
},
{
name: "omit-deprecated-tags",
input: BootstrapConfig{
ReadyBindAddr: "0.0.0.0:4444",
PrometheusBindAddr: "0.0.0.0:9000",
StatsBindAddr: "0.0.0.0:9000",
},
baseArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
PrometheusScrapePath: "/metrics",
},
omitDeprecatedTags: true,
wantArgs: BootstrapTplArgs{
AdminBindAddress: "127.0.0.1",
AdminBindPort: "19000",
StaticClustersJSON: expectedSelfAdminCluster,
StaticListenersJSON: strings.Join(
[]string{expectedPromListener, expectedStatsListener, expectedReadyListener},
", ",
),
// Should not have default stats config JSON when deprecated tags are omitted
StatsConfigJSON: updatedStatsConfigJSON,
PrometheusScrapePath: "/metrics",
},
wantErr: false,
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
args := tt.baseArgs
defer testSetAndResetEnv(t, tt.env)()
err := tt.input.ConfigureArgs(&args, tt.omitDeprecatedTags)
if tt.wantErr {
require.Error(t, err)
} else {
require.NoError(t, err)
// Want to compare JSON fields with JSONEq
argV := reflect.ValueOf(args)
wantV := reflect.ValueOf(tt.wantArgs)
argT := reflect.TypeOf(args)
for i := 0; i < argT.NumField(); i++ {
f := argT.Field(i)
if strings.HasSuffix(f.Name, "JSON") && wantV.Field(i).String() != "" {
// Some of our JSON strings are comma separated objects to be
// insertedinto an array which is not valid JSON on it's own so wrap
// them all in an array. For simple values this is still valid JSON
// too.
want := "[" + wantV.Field(i).String() + "]"
got := "[" + argV.Field(i).String() + "]"
require.JSONEq(t, want, got, "field %s should be equivalent JSON", f.Name)
} else {
require.Equalf(t, wantV.Field(i).Interface(),
argV.Field(i).Interface(), "field %s should be equal", f.Name)
}
}
}
})
}
}
func TestConsulTagSpecifiers(t *testing.T) {
// Conveniently both envoy and Go use the re2 dialect of regular
// expressions, so we can actually test the stats tag extraction regular
// expressions right here!
specs, err := resourceTagSpecifiers(false)
require.NoError(t, err)
specsNoDeprecated, err := resourceTagSpecifiers(true)
require.NoError(t, err)
type testPattern struct {
name string
r *regexp.Regexp
}
parseSpecs := func(specs []string) []testPattern {
var patterns []testPattern
for _, spec := range specs {
var m struct {
TagName string `json:"tag_name"`
Regex string `json:"regex"`
}
require.NoError(t, json.Unmarshal([]byte(spec), &m))
patterns = append(patterns, testPattern{
name: m.TagName,
r: regexp.MustCompile(m.Regex),
})
}
return patterns
}
var (
patterns = parseSpecs(specs)
patternsNoDeprecated = parseSpecs(specsNoDeprecated)
)
type testcase struct {
name string
stat string
expect map[string][]string // this is the m[1:] of the match
expectNoDeprecated map[string][]string // this is the m[1:] of the match
}
cases := []testcase{
{
name: "cluster service",
stat: "cluster.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.bind_errors",
expect: map[string][]string{
"consul.custom_hash": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.datacenter": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.custom_hash": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.datacenter": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.routing_type": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.destination.service": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.target": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.dc2"},
"consul.destination.trust_domain": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.full_target": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.namespace": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.routing_type": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.service": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.service_subset": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.target": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.dc2"},
"consul.trust_domain": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
expectNoDeprecated: map[string][]string{
"consul.destination.custom_hash": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.datacenter": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.routing_type": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.destination.service": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.target": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.dc2"},
"consul.destination.trust_domain": {"pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
},
{
name: "cluster custom service",
stat: "cluster.f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.bind_errors",
expect: map[string][]string{
"consul.custom_hash": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.datacenter": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.custom_hash": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.destination.datacenter": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.routing_type": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.destination.service": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.target": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~pong.default.dc2"},
"consul.destination.trust_domain": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.full_target": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.namespace": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.routing_type": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.service": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.service_subset": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.target": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~pong.default.dc2"},
"consul.trust_domain": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
expectNoDeprecated: map[string][]string{
"consul.destination.custom_hash": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.destination.datacenter": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.routing_type": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.destination.service": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.target": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~pong.default.dc2"},
"consul.destination.trust_domain": {"f8f8f8f8~pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
},
{
name: "cluster service subset",
stat: "cluster.v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.bind_errors",
expect: map[string][]string{
"consul.custom_hash": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.datacenter": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.custom_hash": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.datacenter": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.routing_type": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.destination.service": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.destination.target": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2.pong.default.dc2"},
"consul.destination.trust_domain": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.full_target": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.namespace": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.routing_type": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.service": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.service_subset": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.target": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2.pong.default.dc2"},
"consul.trust_domain": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
expectNoDeprecated: map[string][]string{
"consul.destination.custom_hash": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.datacenter": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.routing_type": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.destination.service": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.destination.target": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2.pong.default.dc2"},
"consul.destination.trust_domain": {"v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
},
{
name: "cluster custom service subset",
stat: "cluster.f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.bind_errors",
expect: map[string][]string{
"consul.custom_hash": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.datacenter": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.custom_hash": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.destination.datacenter": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.routing_type": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.destination.service": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.destination.target": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.dc2"},
"consul.destination.trust_domain": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.full_target": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.namespace": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.routing_type": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.service": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.service_subset": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.target": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.dc2"},
"consul.trust_domain": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
expectNoDeprecated: map[string][]string{
"consul.destination.custom_hash": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.destination.datacenter": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.routing_type": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal"},
"consul.destination.service": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.destination.target": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.dc2"},
"consul.destination.trust_domain": {"f8f8f8f8~v2.pong.default.dc2.internal.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
},
{
name: "cluster custom service subset non-default partition",
stat: "cluster.f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.bind_errors",
expect: map[string][]string{
"consul.custom_hash": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.datacenter": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.custom_hash": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.destination.datacenter": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "partA"},
"consul.destination.routing_type": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal-v1"},
"consul.destination.service": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.destination.target": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.partA.dc2"},
"consul.destination.trust_domain": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.full_target": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.namespace": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.routing_type": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal-v1"},
"consul.service": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.service_subset": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.target": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.partA.dc2"},
"consul.trust_domain": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
expectNoDeprecated: map[string][]string{
"consul.destination.custom_hash": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8"},
"consul.destination.datacenter": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "dc2"},
"consul.destination.full_target": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.partition": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "partA"},
"consul.destination.routing_type": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "internal-v1"},
"consul.destination.service": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "v2"},
"consul.destination.target": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "f8f8f8f8~v2.pong.default.partA.dc2"},
"consul.destination.trust_domain": {"f8f8f8f8~v2.pong.default.partA.dc2.internal-v1.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
},
{
name: "cluster service peered",
stat: "cluster.pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.bind_errors",
expect: map[string][]string{
"consul.custom_hash": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.custom_hash": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.full_target": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.peer": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "cloudpeer"},
"consul.destination.routing_type": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "external"},
"consul.destination.service": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.target": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.cloudpeer"},
"consul.destination.trust_domain": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.full_target": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.namespace": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.routing_type": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "external"},
"consul.service": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.service_subset": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.target": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.cloudpeer"},
"consul.trust_domain": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
expectNoDeprecated: map[string][]string{
"consul.destination.custom_hash": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.full_target": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648"},
"consul.destination.namespace": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "default"},
"consul.destination.peer": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "cloudpeer"},
"consul.destination.routing_type": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "external"},
"consul.destination.service": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong"},
"consul.destination.service_subset": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", ""},
"consul.destination.target": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "pong.default.cloudpeer"},
"consul.destination.trust_domain": {"pong.default.cloudpeer.external.e5b08d03-bfc3-c870-1833-baddb116e648.consul.", "e5b08d03-bfc3-c870-1833-baddb116e648"},
},
},
{
name: "tcp listener no namespace or partition (OSS)",
stat: "tcp.upstream.db.dc1.downstream_cx_total",
expect: map[string][]string{
"consul.upstream.datacenter": {"db.dc1.", "dc1"},
"consul.upstream.namespace": {"db.dc1.", ""},
"consul.upstream.partition": {"db.dc1.", ""},
"consul.upstream.service": {"db.dc1.", "db"},
},
},
{
name: "tcp peered listener no namespace or partition (OSS)",
stat: "tcp.upstream_peered.db.cloudpeer.downstream_cx_total",
expect: map[string][]string{
"consul.upstream.peer": {"db.cloudpeer.", "cloudpeer"},
"consul.upstream.namespace": {"db.cloudpeer.", ""},
"consul.upstream.service": {"db.cloudpeer.", "db"},
},
},
{
name: "tcp listener with namespace and partition",
stat: "tcp.upstream.db.frontend.west.dc1.downstream_cx_total",
expect: map[string][]string{
"consul.upstream.datacenter": {"db.frontend.west.dc1.", "dc1"},
"consul.upstream.namespace": {"db.frontend.west.dc1.", "frontend"},
"consul.upstream.partition": {"db.frontend.west.dc1.", "west"},
"consul.upstream.service": {"db.frontend.west.dc1.", "db"},
},
},
{
name: "tcp peered listener with namespace",
stat: "tcp.upstream_peered.db.frontend.cloudpeer.downstream_cx_total",
expect: map[string][]string{
"consul.upstream.peer": {"db.frontend.cloudpeer.", "cloudpeer"},
"consul.upstream.namespace": {"db.frontend.cloudpeer.", "frontend"},
"consul.upstream.service": {"db.frontend.cloudpeer.", "db"},
},
},
{
name: "http listener no namespace or partition (OSS)",
stat: "http.upstream.web.dc1.downstream_cx_total",
expect: map[string][]string{
"consul.upstream.datacenter": {"web.dc1.", "dc1"},
"consul.upstream.namespace": {"web.dc1.", ""},
"consul.upstream.partition": {"web.dc1.", ""},
"consul.upstream.service": {"web.dc1.", "web"},
},
},
{
name: "http peered listener no namespace or partition (OSS)",
stat: "http.upstream_peered.web.cloudpeer.downstream_cx_total",
expect: map[string][]string{
"consul.upstream.peer": {"web.cloudpeer.", "cloudpeer"},
"consul.upstream.namespace": {"web.cloudpeer.", ""},
"consul.upstream.service": {"web.cloudpeer.", "web"},
},
},
{
name: "http listener with namespace and partition",
stat: "http.upstream.web.frontend.west.dc1.downstream_cx_total",
expect: map[string][]string{
"consul.upstream.datacenter": {"web.frontend.west.dc1.", "dc1"},
"consul.upstream.namespace": {"web.frontend.west.dc1.", "frontend"},
"consul.upstream.partition": {"web.frontend.west.dc1.", "west"},
"consul.upstream.service": {"web.frontend.west.dc1.", "web"},
},
},
{
name: "http peered listener with namespace",
stat: "http.upstream_peered.web.frontend.cloudpeer.downstream_cx_total",
expect: map[string][]string{
"consul.upstream.peer": {"web.frontend.cloudpeer.", "cloudpeer"},
"consul.upstream.namespace": {"web.frontend.cloudpeer.", "frontend"},
"consul.upstream.service": {"web.frontend.cloudpeer.", "web"},
},
},
}
for _, tc := range cases {
tc := tc
t.Run(tc.name, func(t *testing.T) {
var (
got = make(map[string][]string)
gotNoDeprecated = make(map[string][]string)
)
for _, p := range patterns {
m := p.r.FindStringSubmatch(tc.stat)
if len(m) > 1 {
m = m[1:]
got[p.name] = m
}
}
for _, p := range patternsNoDeprecated {
m := p.r.FindStringSubmatch(tc.stat)
if len(m) > 1 {
m = m[1:]
gotNoDeprecated[p.name] = m
}
}
if tc.expectNoDeprecated == nil {
tc.expectNoDeprecated = tc.expect
}
assert.Equal(t, tc.expect, got)
assert.Equal(t, tc.expectNoDeprecated, gotNoDeprecated)
})
}
}
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
func TestAppendTelemetryCollectorMetrics(t *testing.T) {
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
tests := map[string]struct {
inputArgs *BootstrapTplArgs
bindSocketDir string
wantArgs *BootstrapTplArgs
}{
"dir-without-trailing-slash": {
inputArgs: &BootstrapTplArgs{
ProxyID: "web-sidecar-proxy",
},
bindSocketDir: "/tmp/consul/telemetry-collector",
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
wantArgs: &BootstrapTplArgs{
ProxyID: "web-sidecar-proxy",
StatsSinksJSON: expectedTelemetryCollectorStatsSink,
StaticClustersJSON: expectedTelemetryCollectorCluster,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
},
},
"dir-with-trailing-slash": {
inputArgs: &BootstrapTplArgs{
ProxyID: "web-sidecar-proxy",
},
bindSocketDir: "/tmp/consul/telemetry-collector",
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
wantArgs: &BootstrapTplArgs{
ProxyID: "web-sidecar-proxy",
StatsSinksJSON: expectedTelemetryCollectorStatsSink,
StaticClustersJSON: expectedTelemetryCollectorCluster,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
},
},
"append-clusters-and-stats-sink": {
inputArgs: &BootstrapTplArgs{
ProxyID: "web-sidecar-proxy",
StatsSinksJSON: expectedStatsdSink,
StaticClustersJSON: expectedSelfAdminCluster,
},
bindSocketDir: "/tmp/consul/telemetry-collector",
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
wantArgs: &BootstrapTplArgs{
ProxyID: "web-sidecar-proxy",
StatsSinksJSON: expectedStatsdSink + ",\n" + expectedTelemetryCollectorStatsSink,
StaticClustersJSON: expectedSelfAdminCluster + ",\n" + expectedTelemetryCollectorCluster,
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
},
},
}
for name, tt := range tests {
t.Run(name, func(t *testing.T) {
appendTelemetryCollectorConfig(tt.inputArgs, tt.bindSocketDir)
Allow HCP metrics collection for Envoy proxies Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory where a unix socket will be created with the name `<namespace>_<proxy_id>.sock` to forward Envoy metrics. If set, this will configure: - In bootstrap configuration a local stats_sink and static cluster. These will forward metrics to a loopback listener sent over xDS. - A dynamic listener listening at the socket path that the previously defined static cluster is sending metrics to. - A dynamic cluster that will forward traffic received at this listener to the hcp-metrics-collector service. Reasons for having a static cluster pointing at a dynamic listener: - We want to secure the metrics stream using TLS, but the stats sink can only be defined in bootstrap config. With dynamic listeners/clusters we can use the proxy's leaf certificate issued by the Connect CA, which isn't available at bootstrap time. - We want to intelligently route to the HCP collector. Configuring its addreess at bootstrap time limits our flexibility routing-wise. More on this below. Reasons for defining the collector as an upstream in `proxycfg`: - The HCP collector will be deployed as a mesh service. - Certificate management is taken care of, as mentioned above. - Service discovery and routing logic is automatically taken care of, meaning that no code changes are required in the xds package. - Custom routing rules can be added for the collector using discovery chain config entries. Initially the collector is expected to be deployed to each admin partition, but in the future could be deployed centrally in the default partition. These config entries could even be managed by HCP itself.
2023-03-10 20:52:54 +00:00
// Some of our JSON strings are comma separated objects to be
// insertedinto an array which is not valid JSON on it's own so wrap
// them all in an array. For simple values this is still valid JSON
// too.
wantStatsSink := "[" + tt.wantArgs.StatsSinksJSON + "]"
gotStatsSink := "[" + tt.inputArgs.StatsSinksJSON + "]"
require.JSONEq(t, wantStatsSink, gotStatsSink, "field StatsSinksJSON should be equivalent JSON")
wantClusters := "[" + tt.wantArgs.StaticClustersJSON + "]"
gotClusters := "[" + tt.inputArgs.StaticClustersJSON + "]"
require.JSONEq(t, wantClusters, gotClusters, "field StaticClustersJSON should be equivalent JSON")
})
}
}