consul/website/content/docs/k8s/installation/install.mdx

---
layout: docs
page_title: Install with Helm Chart - Kubernetes
description: >-
  Consul can run directly on Kubernetes, both in server or client mode. For
  pure-Kubernetes workloads, this enables Consul to also exist purely within
  Kubernetes. For heterogeneous workloads, Consul agents can join a server
  running inside or outside of Kubernetes.
---

# Installing Consul on Kubernetes

Consul can run directly on Kubernetes, both in server or client mode.
For pure-Kubernetes workloads, this enables Consul to also exist purely
within Kubernetes. For heterogeneous workloads, Consul agents can join
a server running inside or outside of Kubernetes.

You can install Consul on Kubernetes using the following methods:

1. [Helm chart install](#helm-chart-installation)
1. [Consul K8s CLI install <sup>BETA</sup>.](#consul-k8s-cli-installation)

Refer to the [architecture](/docs/k8s/installation/install#architecture) section to learn more about the general architecture of Consul on Kubernetes.
For a hands-on experience with Consul as a service mesh
for Kubernetes, follow the [Getting Started with Consul service
mesh](https://learn.hashicorp.com/tutorials/consul/service-mesh-deploy?utm_source=WEBSITE&utm_medium=WEB_IO&utm_offer=ARTICLE_PAGE&utm_content=DOCS) tutorial.

## Helm Chart Installation

The recommended way to run Consul on Kubernetes is via the
[Helm chart](/docs/k8s/helm). This will install and configure
all the necessary components to run Consul. The configuration enables you
to run a server cluster, a client cluster, or both.

Step-by-step tutorials for how to deploy Consul to Kubernetes, please see
our [Deploy to Kubernetes](https://learn.hashicorp.com/collections/consul/kubernetes-deploy)
collection. This collection includes configuration caveats for single-node deployments.

The Helm chart exposes several useful configurations and automatically
sets up complex resources, but it **does not automatically operate Consul.**
You must still become familiar with how to monitor, backup,
upgrade, etc. the Consul cluster.

The Helm chart has no required configuration and will install a Consul
cluster with default configurations. We strongly recommend [learning about the configuration options](/docs/k8s/helm#configuration-values) prior to going to production.

~> **Security Warning:** By default, the chart will install an insecure configuration
of Consul. This provides a less complicated out-of-box experience for new users,
but is not appropriate for a production setup. We strongly recommend using
a properly-secured Kubernetes cluster or making sure that you understand and enable
the [recommended security features](/docs/internals/security). Currently,
some of these features are not supported in the Helm chart and require additional
manual configuration.

### Prerequisites

The Consul Helm only supports Helm 3. Install the latest version of the Helm CLI here:
[Installing Helm](https://helm.sh/docs/intro/install/).

### Installing Consul

1. Add the HashiCorp Helm Repository:

   ```shell-session
   $ helm repo add hashicorp https://helm.releases.hashicorp.com
    "hashicorp" has been added to your repositories
   ```

1. Verify that you have access to the consul chart:

   ```shell-session
   $ helm search repo hashicorp/consul
   NAME            	CHART VERSION	APP VERSION	DESCRIPTION
   hashicorp/consul	0.32.0       	1.10.0      Official HashiCorp Consul Chart
   ```

1. Issue the following command to install Consul with the default configuration using Helm 3:

   ```shell-session
   $ helm install consul hashicorp/consul --set global.name=consul
   NAME: consul
   ...
   ```

The Helm chart does everything to set up a recommended Consul-on-Kubernetes deployment.
After installation, a Consul cluster will be formed, a leader will be elected, and every node will have a running Consul agent.

### Customizing Your Installation

If you want to customize your installation,
create a `config.yaml` file to override the default settings.
You can learn what settings are available by running `helm inspect values hashicorp/consul`
or by reading the [Helm Chart Reference](/docs/k8s/helm).

For example, if you want to enable the [Consul Connect](/docs/k8s/connect) feature,
use the following config file:

<CodeBlockConfig filename="config.yaml">

```yaml
global:
  name: consul
connectInject:
  enabled: true
controller:
  enabled: true
```

</CodeBlockConfig>

Once you've created your `config.yaml` file, run `helm install` with the `-f` flag:

```shell-session
$ helm install consul hashicorp/consul -f config.yaml
NAME: consul
...
```

If you've already installed Consul and want to make changes, you'll need to run
`helm upgrade`. See [Upgrading](/docs/k8s/operations/upgrading) for more details.

## Consul K8s CLI Installation

You can install Consul on Kubernetes using the Consul K8s CLI tool.
The tool is currently availabe as an alpha release and is not recommended for production environments.

1. Download and build the CLI as described in the [Consul K8s CLI reference](/docs/k8s/k8s-cli).
1. Issue the `install` subcommand to install Consul on Kubernetes:

   ```shell-session
   consul-k8s install <OPTIONS>
   ```

   Refer to the [Consul K8s CLI reference](/docs/k8s/k8s-cli) for details about all commands and available options.

   If you did not set the `-auto-approve` option to `true`, you will be prompted to proceed with the installation if the pre-install checks pass.

   ```shell-session
   ==> Pre-Install Checks
   ✓ No existing installations found
   ✓ No previous persistent volume claims found
   ✓ No previous secrets found

   ==> Consul Installation Summary
       Installation name: consul
       Namespace: myns
       Overrides:
       connectInject:
         enabled: true
       global:
         name: consul
       server:
         bootstrapExpect: 1
         replicas: 1

       Proceed with installation? (y/n)
   ```

1. Enter `y` to proceed. The pre-install checks may fail if existing `PersistentVolumeClaims` (PVC) are detected. Refer to the [uninstall instructions](/docs/k8s/operations/uninstall#uninstall-consul) for information about removing PVCs.

## Viewing the Consul UI

The Consul UI is enabled by default when using the Helm chart.
For security reasons, it isn't exposed via a `LoadBalancer` Service by default so you must
use `kubectl port-forward` to visit the UI.

#### TLS Disabled

If running with TLS disabled, the Consul UI will be accessible via http on port 8500:

```shell-session
$ kubectl port-forward service/consul-server 8500:8500
...
```

Once the port is forwarded navigate to [http://localhost:8500](http://localhost:8500).

#### TLS Enabled

If running with TLS enabled, the Consul UI will be accessible via https on port 8501:

```shell-session
$ kubectl port-forward service/consul-server 8501:8501
...
```

Once the port is forwarded navigate to [https://localhost:8501](https://localhost:8501).

~> You'll need to click through an SSL warning from your browser because the
Consul certificate authority is self-signed and not in the browser's trust store.

#### ACLs Enabled

If ACLs are enabled, you will need to input an ACL token into the UI in order
to see all resources and make modifications.

To retrieve the bootstrap token that has full permissions, run:

```shell-session
$ kubectl get secrets/consul-bootstrap-acl-token --template='{{.data.token | base64decode }}'
e7924dd1-dc3f-f644-da54-81a73ba0a178%
```

Then paste the token into the UI under the ACLs tab (without the `%`).

~> NOTE: If using multi-cluster federation, your kubectl context must be in the primary datacenter
to retrieve the bootstrap token since secondary datacenters use a separate token
with less permissions.

### Exposing the UI via a service

If you want to expose the UI via a Kubernetes Service, configure
the [`ui.service` chart values](/docs/k8s/helm#v-ui-service).
This service will allow requests to the Consul servers so it should
not be open to the world.

## Accessing the Consul HTTP API

The Consul HTTP API should be accessed by communicating to the local agent
running on the same node. While technically any listening agent (client or
server) can respond to the HTTP API, communicating with the local agent
has important caching behavior, and allows you to use the simpler
[`/agent` endpoints for services and checks](/api/agent).

For Consul installed via the Helm chart, a client agent is installed on
each Kubernetes node. This is explained in the [architecture](/docs/k8s/installation/install#client-agents)
section. To access the agent, you may use the
[downward API](https://kubernetes.io/docs/tasks/inject-data-application/downward-api-volume-expose-pod-information/).

An example pod specification is shown below. In addition to pods, anything
with a pod template can also access the downward API and can therefore also
access Consul: StatefulSets, Deployments, Jobs, etc.

```yaml
apiVersion: v1
kind: Pod
metadata:
  name: consul-example
spec:
  containers:
    - name: example
      image: 'consul:latest'
      env:
        - name: HOST_IP
          valueFrom:
            fieldRef:
              fieldPath: status.hostIP
      command:
        - '/bin/sh'
        - '-ec'
        - |
          export CONSUL_HTTP_ADDR="${HOST_IP}:8500"
          consul kv put hello world
  restartPolicy: Never
```

An example `Deployment` is also shown below to show how the host IP can
be accessed from nested pod specifications:

<CodeBlockConfig highlight="18-28">

```yaml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: consul-example-deployment
spec:
  replicas: 1
  selector:
    matchLabels:
      app: consul-example
  template:
    metadata:
      labels:
        app: consul-example
    spec:
      containers:
        - name: example
          image: 'consul:latest'
          env:
            - name: HOST_IP
              valueFrom:
                fieldRef:
                  fieldPath: status.hostIP
          command:
            - '/bin/sh'
            - '-ec'
            - |
              export CONSUL_HTTP_ADDR="${HOST_IP}:8500"
              consul kv put hello world
```

</CodeBlockConfig>

## Next Steps

If you are still considering a move to Kubernetes, or to Consul on Kubernetes specifically, our [Migrate to Microservices with Consul Service Mesh on Kubernetes](https://learn.hashicorp.com/collections/consul/microservices?utm_source=WEBSITE&utm_medium=WEB_IO&utm_offer=ARTICLE_PAGE&utm_content=DOCS)
collection uses an example application written by a fictional company to illustrate why and how organizations can
migrate from monolith to microservices using Consul service mesh on Kubernetes. The case study in this collection
should provide information valuable for understanding how to develop services that leverage Consul during any stage
of your microservices journey.