Repository holding all of Airbyte Custom Connector used in Status
Go to file
Alexis Pentori 00e07b62c3
using multiple wallet
Signed-off-by: Alexis Pentori <alexis@status.im>
2023-11-30 18:48:36 +01:00
integration_tests Initial commit 2023-11-29 14:18:41 +01:00
sample_files using multiple wallet 2023-11-30 18:48:36 +01:00
secrets Initial commit 2023-11-29 14:18:41 +01:00
source_wallet_fetcher using multiple wallet 2023-11-30 18:48:36 +01:00
unit_tests Initial commit 2023-11-29 14:18:41 +01:00
.gitignore Initial commit 2023-11-29 14:18:41 +01:00
Dockerfile Finishing basic Eth wallet import 2023-11-30 13:58:40 +01:00
README.md Initial commit 2023-11-29 14:18:41 +01:00
acceptance-test-config.yml Initial commit 2023-11-29 14:18:41 +01:00
main.py Initial commit 2023-11-29 14:18:41 +01:00
metadata.yaml Initial commit 2023-11-29 14:18:41 +01:00
requirements.txt Initial commit 2023-11-29 14:18:41 +01:00
setup.py Initial commit 2023-11-29 14:18:41 +01:00

README.md

Wallet Fetcher Source

This is the repository for the Wallet Fetcher source connector, written in Python. For information about how to use this connector within Airbyte, see the documentation.

Local development

Prerequisites

To iterate on this connector, make sure to complete this prerequisites section.

Minimum Python version required = 3.9.0

Activate Virtual Environment and install dependencies

From this connector directory, create a virtual environment:

python -m venv .venv

This will generate a virtualenv for this module in .venv/. Make sure this venv is active in your development environment of choice. To activate it from the terminal, run:

source .venv/bin/activate
pip install -r requirements.txt
pip install '.[tests]'

If you are in an IDE, follow your IDE's instructions to activate the virtualenv.

Note that while we are installing dependencies from requirements.txt, you should only edit setup.py for your dependencies. requirements.txt is used for editable installs (pip install -e) to pull in Python dependencies from the monorepo and will call setup.py. If this is mumbo jumbo to you, don't worry about it, just put your deps in setup.py but install using pip install -r requirements.txt and everything should work as you expect.

Create credentials

If you are a community contributor, follow the instructions in the documentation to generate the necessary credentials. Then create a file secrets/config.json conforming to the source_wallet_fetcher/spec.yaml file. Note that any directory named secrets is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information. See integration_tests/sample_config.json for a sample config file.

If you are an Airbyte core member, copy the credentials in Lastpass under the secret name source wallet-fetcher test creds and place them into secrets/config.json.

Locally running the connector

python main.py spec
python main.py check --config secrets/config.json
python main.py discover --config secrets/config.json
python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json

Locally running the connector docker image

Use airbyte-ci to build your connector

The Airbyte way of building this connector is to use our airbyte-ci tool. You can follow install instructions here. Then running the following command will build your connector:

airbyte-ci connectors --name source-wallet-fetcher build

Once the command is done, you will find your connector image in your local docker registry: airbyte/source-wallet-fetcher:dev.

Customizing our build process

When contributing on our connector you might need to customize the build process to add a system dependency or set an env var. You can customize our build process by adding a build_customization.py module to your connector. This module should contain a pre_connector_install and post_connector_install async function that will mutate the base image and the connector container respectively. It will be imported at runtime by our build process and the functions will be called if they exist.

Here is an example of a build_customization.py module:

from __future__ import annotations

from typing import TYPE_CHECKING

if TYPE_CHECKING:
    # Feel free to check the dagger documentation for more information on the Container object and its methods.
    # https://dagger-io.readthedocs.io/en/sdk-python-v0.6.4/
    from dagger import Container


async def pre_connector_install(base_image_container: Container) -> Container:
    return await base_image_container.with_env_variable("MY_PRE_BUILD_ENV_VAR", "my_pre_build_env_var_value")

async def post_connector_install(connector_container: Container) -> Container:
    return await connector_container.with_env_variable("MY_POST_BUILD_ENV_VAR", "my_post_build_env_var_value")

Build your own connector image

This connector is built using our dynamic built process in airbyte-ci. The base image used to build it is defined within the metadata.yaml file under the connectorBuildOptions. The build logic is defined using Dagger here. It does not rely on a Dockerfile.

If you would like to patch our connector and build your own a simple approach would be to:

  1. Create your own Dockerfile based on the latest version of the connector image.
FROM airbyte/source-wallet-fetcher:latest

COPY . ./airbyte/integration_code
RUN pip install ./airbyte/integration_code

# The entrypoint and default env vars are already set in the base image
# ENV AIRBYTE_ENTRYPOINT "python /airbyte/integration_code/main.py"
# ENTRYPOINT ["python", "/airbyte/integration_code/main.py"]

Please use this as an example. This is not optimized.

  1. Build your image:
docker build -t airbyte/source-wallet-fetcher:dev .
# Running the spec command against your patched connector
docker run airbyte/source-wallet-fetcher:dev spec

Run

Then run any of the connector commands as follows:

docker run --rm airbyte/source-wallet-fetcher:dev spec
docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-wallet-fetcher:dev check --config /secrets/config.json
docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-wallet-fetcher:dev discover --config /secrets/config.json
docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-wallet-fetcher:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json

Testing

Make sure to familiarize yourself with pytest test discovery to know how your test files and methods should be named. First install test dependencies into your virtual environment:

pip install .[tests]

Unit Tests

To run unit tests locally, from the connector directory run:

python -m pytest unit_tests

Integration Tests

There are two types of integration tests: Acceptance Tests (Airbyte's test suite for all source connectors) and custom integration tests (which are specific to this connector).

Custom Integration tests

Place custom tests inside integration_tests/ folder, then, from the connector root, run

python -m pytest integration_tests

Acceptance Tests

Customize acceptance-test-config.yml file to configure tests. See Connector Acceptance Tests for more information. If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py. Please run acceptance tests via airbyte-ci:

airbyte-ci connectors --name source-wallet-fetcher test

Dependency Management

All of your dependencies should go in setup.py, NOT requirements.txt. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development. We split dependencies between two groups, dependencies that are:

  • required for your connector to work need to go to MAIN_REQUIREMENTS list.
  • required for the testing need to go to TEST_REQUIREMENTS list

Publishing a new version of the connector

You've checked out the repo, implemented a million dollar feature, and you're ready to share your changes with the world. Now what?

  1. Make sure your changes are passing our test suite: airbyte-ci connectors --name=source-wallet-fetcher test
  2. Bump the connector version in metadata.yaml: increment the dockerImageTag value. Please follow semantic versioning for connectors.
  3. Make sure the metadata.yaml content is up to date.
  4. Make the connector documentation and its changelog is up to date (docs/integrations/sources/wallet-fetcher.md).
  5. Create a Pull Request: use our PR naming conventions.
  6. Pat yourself on the back for being an awesome contributor.
  7. Someone from Airbyte will take a look at your PR and iterate with you to merge it into master.