4073 lines
180 KiB
Plaintext
4073 lines
180 KiB
Plaintext
// Copyright (c) 2015-2017 Khronos Group. This work is licensed under a
|
|
// Creative Commons Attribution 4.0 International License; see
|
|
// http://creativecommons.org/licenses/by/4.0/
|
|
|
|
[[synchronization]]
|
|
= Synchronization and Cache Control
|
|
|
|
Synchronization of access to resources is primarily the responsibility of
|
|
the application in Vulkan.
|
|
The order of execution of commands with respect to the host and other
|
|
commands on the device has few implicit guarantees, and needs to be
|
|
explicitly specified.
|
|
Memory caches and other optimizations are also explicitly managed, requiring
|
|
that the flow of data through the system is largely under application
|
|
control.
|
|
|
|
Whilst some implicit guarantees exist between commands, five explicit
|
|
synchronization mechanisms are exposed by Vulkan:
|
|
|
|
<<synchronization-fences,Fences>>::
|
|
Fences can: be used to communicate to the host that execution of some
|
|
task on the device has completed.
|
|
|
|
<<synchronization-semaphores,Semaphores>>::
|
|
Semaphores can: be used to control resource access across multiple
|
|
queues.
|
|
|
|
<<synchronization-events,Events>>::
|
|
Events provide a fine-grained synchronization primitive which can: be
|
|
signaled either within a command buffer or by the host, and can: be
|
|
waited upon within a command buffer or queried on the host.
|
|
|
|
<<synchronization-pipeline-barriers,Pipeline Barriers>>::
|
|
Pipeline barriers also provide synchronization control within a command
|
|
buffer, but at a single point, rather than with separate signal and wait
|
|
operations.
|
|
|
|
<<renderpass,Render Passes>>::
|
|
Render passes provide a useful synchronization framework for most
|
|
rendering tasks, built upon the concepts in this chapter.
|
|
Many cases that would otherwise need an application to use other
|
|
synchronization primitives can: be expressed more efficiently as part of
|
|
a render pass.
|
|
|
|
|
|
[[synchronization-dependencies]]
|
|
== Execution and Memory Dependencies
|
|
|
|
An _operation_ is an arbitrary amount of work to be executed on the host, a
|
|
device, or an external entity such as a presentation engine.
|
|
Synchronization commands introduce explicit _execution dependencies_, and
|
|
_memory dependencies_ between two sets of operations defined by the
|
|
command's two _synchronization scopes_.
|
|
|
|
[[synchronization-dependencies-scopes]]
|
|
The synchronization scopes define which other operations a synchronization
|
|
command is able to create execution dependencies with.
|
|
Any type of operation that is not in a synchronization command's
|
|
synchronization scopes will not be included in the resulting dependency.
|
|
For example, for many synchronization commands, the synchronization scopes
|
|
can: be limited to just operations executing in specific
|
|
<<synchronization-pipeline-stages,pipeline stages>>, which allows other
|
|
pipeline stages to be excluded from a dependency.
|
|
Other scoping options are possible, depending on the particular command.
|
|
|
|
[[synchronization-dependencies-execution]]
|
|
An _execution dependency_ is a guarantee that for two sets of operations,
|
|
the first set must: _happen-before_ the second set.
|
|
If an operation happens-before another operation, then the first operation
|
|
must: complete before the second operation is initiated.
|
|
More precisely:
|
|
|
|
* Let *A* and *B* be separate sets of operations.
|
|
* Let *S* be a synchronization command.
|
|
* Let *A~S~* and *B~S~* be the synchronization scopes of *S*.
|
|
* Let *A'* be the intersection of sets *A* and *A~S~*.
|
|
* Let *B'* be the intersection of sets *B* and *B~S~*.
|
|
* Submitting *A*, *S* and *B* for execution, in that order, will result in
|
|
execution dependency *E* between *A'* and *B'*.
|
|
* Execution dependency *E* guarantees that *A'* happens-before *B'*.
|
|
|
|
[[synchronization-dependencies-chains]]
|
|
An _execution dependency chain_ is a sequence of execution dependencies that
|
|
form a happens-before relation between the first dependency's *A'* and the
|
|
final dependency's *B'*.
|
|
For each consecutive pair of execution dependencies, a chain exists if the
|
|
intersection of *B~S~* in the first dependency and *A~S~* in the second
|
|
dependency is not an empty set.
|
|
The formation of a single execution dependency from an execution dependency
|
|
chain can be described by substituting the following in the description of
|
|
execution dependencies:
|
|
|
|
* Let *S* be a set of synchronization commands that generate an execution
|
|
dependency chain.
|
|
* Let *A~S~* be the first synchronization scope of the first command in
|
|
*S*.
|
|
* Let *B~S~* be the second synchronization scope of the last command in
|
|
*S*.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
An execution dependency is inherently also multiple execution dependencies -
|
|
a dependency exists between each subset of *A'* and each subset of *B'*, and
|
|
the same is true for execution dependency chains.
|
|
For example, a synchronization command with multiple
|
|
<<synchronization-pipeline-stages,pipeline stages>> in its stage masks
|
|
effectively generates one dependency between each source stage and each
|
|
destination stage.
|
|
This can be useful to think about when considering how execution chains are
|
|
formed if they do not involve all parts of a synchronization command's
|
|
dependency.
|
|
Similarly, any set of adjacent dependencies in an execution dependency chain
|
|
can: be considered an execution dependency chain in its own right.
|
|
====
|
|
|
|
Execution dependencies alone are not sufficient to guarantee that values
|
|
resulting from writes in one set of operations can: be read from another set
|
|
of operations.
|
|
|
|
[[synchronization-dependencies-available-and-visible]]
|
|
Two additional types of operation are used to control memory access.
|
|
_Availability operations_ cause the values generated by specified memory
|
|
write accesses to become _available_ for future access.
|
|
Any available value remains available until a subsequent write to the same
|
|
memory location occurs (whether it is made available or not) or the memory
|
|
is freed.
|
|
_Visibility operations_ cause any available values to become _visible_ to
|
|
specified memory accesses.
|
|
|
|
[[synchronization-dependencies-memory]]
|
|
A _memory dependency_ is an execution dependency which includes availability
|
|
and visibility operations such that:
|
|
|
|
* The first set of operations happens-before the availability operation.
|
|
* The availability operation happens-before the visibility operation.
|
|
* The visibility operation happens-before the second set of operations.
|
|
|
|
Once written values are made visible to a particular type of memory access,
|
|
they can: be read or written by that type of memory access.
|
|
Most synchronization commands in Vulkan define a memory dependency.
|
|
|
|
[[synchronization-dependencies-access-scopes]]
|
|
The specific memory accesses that are made available and visible are defined
|
|
by the _access scopes_ of a memory dependency.
|
|
Any type of access that is in a memory dependency's first access scope and
|
|
occurs in *A'* is made available.
|
|
Any type of access that is in a memory dependency's second access scope and
|
|
occurs in *B'* has any available writes made visible to it.
|
|
Any type of operation that is not in a synchronization command's access
|
|
scopes will not be included in the resulting dependency.
|
|
|
|
A memory dependency enforces availability and visibility of memory accesses
|
|
and execution order between two sets of operations.
|
|
Adding to the description of <<synchronization-dependencies-chains,
|
|
execution dependency chains>>:
|
|
|
|
* Let *a* be the set of memory accesses performed by *A'*.
|
|
* Let *b* be the set of memory accesses performed by *B'*.
|
|
* Let *a~S~* be the first access scope of the first command in *S*.
|
|
* Let *b~S~* be the second access scope of the last command in *S*.
|
|
* Let *a'* be the intersection of sets *a* and *a~S~*.
|
|
* Let *b'* be the intersection of sets *b* and *b~S~*.
|
|
* Submitting *A*, *S* and *B* for execution, in that order, will result in
|
|
a memory dependency *m* between *A'* and *B'*.
|
|
* Memory dependency *m* guarantees that:
|
|
** Memory writes in *a'* are made available.
|
|
** Available memory writes, including those from *a'*, are made visible to
|
|
*b'*.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Execution and memory dependencies are used to solve data hazards, i.e. to
|
|
ensure that read and write operations occur in a well-defined order.
|
|
Write-after-read hazards can be solved with just an execution dependency,
|
|
but read-after-write and write-after-write hazards need appropriate memory
|
|
dependencies to be included between them.
|
|
If an application does not include dependencies to solve these hazards, the
|
|
results and execution orders of memory accesses are undefined.
|
|
====
|
|
|
|
|
|
[[synchronization-image-layout-transitions]]
|
|
=== Image Layout Transitions
|
|
|
|
Image subresources can: be transitioned from one <<resources-image-layouts,
|
|
layout>> to another as part of a <<synchronization-dependencies-memory,
|
|
memory dependency>> (e.g. by using an
|
|
<<synchronization-image-memory-barriers,image memory barrier>>).
|
|
When a layout transition is specified in a memory dependency, it
|
|
happens-after the availability operations in the memory dependency, and
|
|
happens-before the visibility operations.
|
|
Image layout transitions may: perform read and write accesses on all memory
|
|
bound to the image subresource range, so applications must: ensure that all
|
|
memory writes have been made
|
|
<<synchronization-dependencies-available-and-visible, available>> before a
|
|
layout transition is executed.
|
|
Available memory is automatically made visible to a layout transition, and
|
|
writes performed by a layout transition are automatically made available.
|
|
|
|
Layout transitions always apply to a particular image subresource range, and
|
|
specify both an old layout and new layout.
|
|
If the old layout does not match the new layout, a transition occurs.
|
|
The old layout must: match the current layout of the image subresource
|
|
range, with one exception.
|
|
The old layout can: always be specified as ename:VK_IMAGE_LAYOUT_UNDEFINED,
|
|
though doing so invalidates the contents of the image subresource range.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Setting the old layout to ename:VK_IMAGE_LAYOUT_UNDEFINED implies that the
|
|
contents of the image subresource need not be preserved.
|
|
Implementations may: use this information to avoid performing expensive data
|
|
transition operations.
|
|
====
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Applications must: ensure that layout transitions happen-after all
|
|
operations accessing the image with the old layout, and happen-before any
|
|
operations that will access the image with the new layout.
|
|
Layout transitions are potentially read/write operations, so not defining
|
|
appropriate memory dependencies to guarantee this will result in a data
|
|
race.
|
|
====
|
|
|
|
Image layout transitions interact with <<resources-memory-aliasing,memory
|
|
aliasing>>.
|
|
|
|
|
|
[[synchronization-pipeline-stages]]
|
|
=== Pipeline Stages
|
|
|
|
The work performed by an <<fundamentals-queueoperation-command-types, action
|
|
command>> consists of multiple operations, which are performed by a sequence
|
|
of logically independent execution units known as _pipeline stages_.
|
|
The exact pipeline stages executed depend on the particular action command
|
|
that is used, and current command buffer state when the action command was
|
|
recorded.
|
|
<<drawing,Drawing commands>>, <<dispatch,dispatching commands>>,
|
|
<<copies,copy commands>>, and <<clears,clear commands>> all execute in
|
|
different sets of <<synchronization-pipeline-stages-types,pipeline stages>>.
|
|
|
|
Execution of operations across pipeline stages must: adhere to
|
|
<<synchronization-implicit, implicit ordering guarantees>>, particularly
|
|
including <<synchronization-pipeline-stages-order, pipeline stage order>>.
|
|
Otherwise, execution across pipeline stages may: overlap or execute out of
|
|
order with regards to other stages, unless otherwise enforced by an
|
|
execution dependency.
|
|
|
|
[open,refpage='VkPipelineStageFlagBits',desc='Bitmask specifying pipeline stages',type='enums']
|
|
--
|
|
|
|
Several of the synchronization commands include pipeline stage parameters,
|
|
restricting the <<synchronization-dependencies-scopes, synchronization
|
|
scopes>> for that command to just those stages.
|
|
This allows fine grained control over the exact execution dependencies and
|
|
accesses performed by action commands.
|
|
Implementations should: use these pipeline stages to avoid unnecessary
|
|
stalls or cache flushing.
|
|
|
|
Bits which can be set, specifying pipeline stages, are:
|
|
|
|
include::../api/enums/VkPipelineStageFlagBits.txt[]
|
|
|
|
* ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT specifies the stage of the
|
|
pipeline where any commands are initially received by the queue.
|
|
ifdef::VK_NVX_device_generated_commands[]
|
|
* ename:VK_PIPELINE_STAGE_COMMAND_PROCESS_BIT_NVX specifies the stage of
|
|
the pipeline where device-side generation of commands via
|
|
flink:vkCmdProcessCommandsNVX is handled.
|
|
endif::VK_NVX_device_generated_commands[]
|
|
* ename:VK_PIPELINE_STAGE_DRAW_INDIRECT_BIT specifies the stage of the
|
|
pipeline where Draw/DispatchIndirect data structures are consumed.
|
|
ifdef::VK_NVX_device_generated_commands[]
|
|
This stage also includes reading commands written by
|
|
flink:vkCmdProcessCommandsNVX.
|
|
endif::VK_NVX_device_generated_commands[]
|
|
* ename:VK_PIPELINE_STAGE_VERTEX_INPUT_BIT specifies the stage of the
|
|
pipeline where vertex and index buffers are consumed.
|
|
* ename:VK_PIPELINE_STAGE_VERTEX_SHADER_BIT specifies the vertex shader
|
|
stage.
|
|
* ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT specifies the
|
|
tessellation control shader stage.
|
|
* ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT specifies the
|
|
tessellation evaluation shader stage.
|
|
* ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT specifies the geometry
|
|
shader stage.
|
|
* ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT specifies the fragment
|
|
shader stage.
|
|
* ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT specifies the stage of
|
|
the pipeline where early fragment tests (depth and stencil tests before
|
|
fragment shading) are performed.
|
|
This stage also includes <<renderpass-load-store-ops, subpass load
|
|
operations>> for framebuffer attachments with a depth/stencil format.
|
|
* ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT specifies the stage of
|
|
the pipeline where late fragment tests (depth and stencil tests after
|
|
fragment shading) are performed.
|
|
This stage also includes <<renderpass-load-store-ops, subpass store
|
|
operations>> for framebuffer attachments with a depth/stencil format.
|
|
* ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT specifies the stage
|
|
of the pipeline after blending where the final color values are output
|
|
from the pipeline.
|
|
This stage also includes <<renderpass-load-store-ops, subpass load and
|
|
store operations>> and multisample resolve operations for framebuffer
|
|
attachments with a color format.
|
|
* [[synchronization-pipeline-stages-transfer]]
|
|
ename:VK_PIPELINE_STAGE_TRANSFER_BIT specifies the execution of copy
|
|
commands.
|
|
This includes the operations resulting from all <<copies,copy
|
|
commands>>, <<clears,clear commands>> (with the exception of
|
|
flink:vkCmdClearAttachments), and flink:vkCmdCopyQueryPoolResults.
|
|
* ename:VK_PIPELINE_STAGE_COMPUTE_SHADER_BIT specifies the execution of a
|
|
compute shader.
|
|
* ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT specifies the final stage in
|
|
the pipeline where operations generated by all commands complete
|
|
execution.
|
|
* ename:VK_PIPELINE_STAGE_HOST_BIT specifies a pseudo-stage indicating
|
|
execution on the host of reads/writes of device memory.
|
|
This stage is not invoked by any commands recorded in a command buffer.
|
|
* ename:VK_PIPELINE_STAGE_ALL_GRAPHICS_BIT specifies the execution of all
|
|
graphics pipeline stages, and is equivalent to the logical OR of:
|
|
** ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT
|
|
** ename:VK_PIPELINE_STAGE_DRAW_INDIRECT_BIT
|
|
** ename:VK_PIPELINE_STAGE_VERTEX_INPUT_BIT
|
|
** ename:VK_PIPELINE_STAGE_VERTEX_SHADER_BIT
|
|
** ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT
|
|
** ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
|
|
** ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
|
|
** ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT
|
|
** ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT
|
|
** ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT
|
|
** ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
|
|
** ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT
|
|
* ename:VK_PIPELINE_STAGE_ALL_COMMANDS_BIT is equivalent to the logical OR
|
|
of every other pipeline stage flag that is supported on the queue it is
|
|
used with.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
An execution dependency with only ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT
|
|
in the destination stage mask will only prevent that stage from executing in
|
|
subsequently submitted commands.
|
|
As this stage does not perform any actual execution, this is not observable
|
|
- in effect, it does not delay processing of subsequent commands.
|
|
Similarly an execution dependency with only
|
|
ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT in the source stage mask will
|
|
effectively not wait for any prior commands to complete.
|
|
|
|
When defining a memory dependency, using only
|
|
ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT or
|
|
ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT would never make any accesses
|
|
available and/or visible because these stages do not access memory.
|
|
|
|
ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT and
|
|
ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT are useful for accomplishing layout
|
|
transitions and queue ownership operations when the required execution
|
|
dependency is satisfied by other means - for example, semaphore operations
|
|
between queues.
|
|
====
|
|
|
|
--
|
|
|
|
[[synchronization-pipeline-stages-masks]]
|
|
If a synchronization command includes a source stage mask, its first
|
|
<<synchronization-dependencies-scopes, synchronization scope>> only includes
|
|
execution of the pipeline stages specified in that mask, and its first
|
|
<<synchronization-dependencies-access-scopes, access scope>> only includes
|
|
memory access performed by pipeline stages specified in that mask.
|
|
If a synchronization command includes a destination stage mask, its second
|
|
<<synchronization-dependencies-scopes, synchronization scope>> only includes
|
|
execution of the pipeline stages specified in that mask, and its second
|
|
<<synchronization-dependencies-access-scopes, access scope>> only includes
|
|
memory access performed by pipeline stages specified in that mask.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Including a particular pipeline stage in the first
|
|
<<synchronization-dependencies-scopes, synchronization scope>> of a command
|
|
implicitly includes <<synchronization-pipeline-stages-order, logically
|
|
earlier>> pipeline stages in the synchronization scope.
|
|
Similarly, the second <<synchronization-dependencies-scopes, synchronization
|
|
scope>> includes <<synchronization-pipeline-stages-order, logically later>>
|
|
pipeline stages.
|
|
|
|
However, note that <<synchronization-dependencies-access-scopes, access
|
|
scopes>> are not affected in this way - only the precise stages specified
|
|
are considered part of each access scope.
|
|
====
|
|
|
|
Certain pipeline stages are only available on queues that support a
|
|
particular set of operations.
|
|
The following table lists, for each pipeline stage flag, which queue
|
|
capability flag must: be supported by the queue.
|
|
When multiple flags are enumerated in the second column of the table, it
|
|
means that the pipeline stage is supported on the queue if it supports any
|
|
of the listed capability flags.
|
|
For further details on queue capabilities see
|
|
<<devsandqueues-physical-device-enumeration,Physical Device Enumeration>>
|
|
and <<devsandqueues-queues,Queues>>.
|
|
|
|
[[synchronization-pipeline-stages-supported]]
|
|
.Supported pipeline stage flags
|
|
[cols="60%,40%",options="header"]
|
|
|====
|
|
|Pipeline stage flag | Required queue capability flag
|
|
|ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT | None required
|
|
|ename:VK_PIPELINE_STAGE_DRAW_INDIRECT_BIT | ename:VK_QUEUE_GRAPHICS_BIT or ename:VK_QUEUE_COMPUTE_BIT
|
|
|ename:VK_PIPELINE_STAGE_VERTEX_INPUT_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_VERTEX_SHADER_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_COMPUTE_SHADER_BIT | ename:VK_QUEUE_COMPUTE_BIT
|
|
|ename:VK_PIPELINE_STAGE_TRANSFER_BIT | ename:VK_QUEUE_GRAPHICS_BIT, ename:VK_QUEUE_COMPUTE_BIT or ename:VK_QUEUE_TRANSFER_BIT
|
|
|ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT | None required
|
|
|ename:VK_PIPELINE_STAGE_HOST_BIT | None required
|
|
|ename:VK_PIPELINE_STAGE_ALL_GRAPHICS_BIT | ename:VK_QUEUE_GRAPHICS_BIT
|
|
|ename:VK_PIPELINE_STAGE_ALL_COMMANDS_BIT | None required
|
|
ifdef::VK_NVX_device_generated_commands[]
|
|
|ename:VK_PIPELINE_STAGE_COMMAND_PROCESS_BIT_NVX | ename:VK_QUEUE_GRAPHICS_BIT or ename:VK_QUEUE_COMPUTE_BIT
|
|
endif::VK_NVX_device_generated_commands[]
|
|
|====
|
|
|
|
[[synchronization-pipeline-stages-order]]
|
|
Pipeline stages that execute as a result of a command logically complete
|
|
execution in a specific order, such that completion of a logically later
|
|
pipeline stage must: not happen-before completion of a logically earlier
|
|
stage.
|
|
This means that including any given stage in the source stage mask for a
|
|
particular synchronization command also implies that any logically earlier
|
|
stages are included in *A~S~* for that command.
|
|
|
|
Similarly, initiation of a logically earlier pipeline stage must: not
|
|
happen-after initiation of a logically later pipeline stage.
|
|
Including any given stage in the destination stage mask for a particular
|
|
synchronization command also implies that any logically later stages are
|
|
included in *B~S~* for that command.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Implementations may: not support synchronization at every pipeline stage for
|
|
every synchronization operation.
|
|
If a pipeline stage that an implementation does not support synchronization
|
|
for appears in a source stage mask, it may: substitute any logically later
|
|
stage in its place for the first synchronization scope.
|
|
If a pipeline stage that an implementation does not support synchronization
|
|
for appears in a destination stage mask, it may: substitute any logically
|
|
earlier stage in its place for the second synchronization scope.
|
|
|
|
For example, if an implementation is unable to signal an event immediately
|
|
after vertex shader execution is complete, it may: instead signal the event
|
|
after color attachment output has completed.
|
|
|
|
If an implementation makes such a substitution, it must: not affect the
|
|
semantics of execution or memory dependencies or image and buffer memory
|
|
barriers.
|
|
====
|
|
|
|
[[synchronization-pipeline-stages-types]]
|
|
The order of pipeline stages depends on the particular pipeline; graphics,
|
|
compute, transfer or host.
|
|
|
|
For the graphics pipeline, the following stages occur in this order:
|
|
|
|
* ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT
|
|
* ename:VK_PIPELINE_STAGE_DRAW_INDIRECT_BIT
|
|
* ename:VK_PIPELINE_STAGE_VERTEX_INPUT_BIT
|
|
* ename:VK_PIPELINE_STAGE_VERTEX_SHADER_BIT
|
|
* ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT
|
|
* ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
|
|
* ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
|
|
* ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT
|
|
* ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT
|
|
* ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT
|
|
* ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
|
|
* ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT
|
|
|
|
For the compute pipeline, the following stages occur in this order:
|
|
|
|
* ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT
|
|
* ename:VK_PIPELINE_STAGE_DRAW_INDIRECT_BIT
|
|
* ename:VK_PIPELINE_STAGE_COMPUTE_SHADER_BIT
|
|
* ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT
|
|
|
|
For the transfer pipeline, the following stages occur in this order:
|
|
|
|
* ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT
|
|
* ename:VK_PIPELINE_STAGE_TRANSFER_BIT
|
|
* ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT
|
|
|
|
For host operations, only one pipeline stage occurs, so no order is
|
|
guaranteed:
|
|
|
|
* ename:VK_PIPELINE_STAGE_HOST_BIT
|
|
|
|
ifdef::VK_NVX_device_generated_commands[]
|
|
For the command processing pipeline, the following stages occur in this
|
|
order:
|
|
|
|
* ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT
|
|
* ename:VK_PIPELINE_STAGE_COMMAND_PROCESS_BIT_NVX
|
|
* ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT
|
|
endif::VK_NVX_device_generated_commands[]
|
|
|
|
|
|
[[synchronization-access-types]]
|
|
=== Access Types
|
|
|
|
[open,refpage='VkAccessFlagBits',desc='Bitmask specifying memory access types that will participate in a memory dependency',type='enums']
|
|
--
|
|
|
|
Memory in Vulkan can: be accessed from within shader invocations and via
|
|
some fixed-function stages of the pipeline.
|
|
The _access type_ is a function of the <<descriptorsets, descriptor type>>
|
|
used, or how a fixed-function stage accesses memory.
|
|
Each access type corresponds to a bit flag in slink:VkAccessFlagBits.
|
|
|
|
[[synchronization-access-masks]]
|
|
Some synchronization commands take sets of access types as parameters to
|
|
define the <<synchronization-dependencies-access-scopes, access scopes>> of
|
|
a memory dependency.
|
|
If a synchronization command includes a source access mask, its first
|
|
<<synchronization-dependencies-access-scopes, access scope>> only includes
|
|
accesses via the access types specified in that mask.
|
|
Similarly, if a synchronization command includes a destination access mask,
|
|
its second <<synchronization-dependencies-access-scopes, access scope>> only
|
|
includes accesses via the access types specified in that mask.
|
|
|
|
Access types that can: be set in an access mask include:
|
|
|
|
include::../api/enums/VkAccessFlagBits.txt[]
|
|
|
|
* ename:VK_ACCESS_INDIRECT_COMMAND_READ_BIT specifies read access to an
|
|
indirect command structure read as part of an indirect drawing or
|
|
dispatch command.
|
|
* ename:VK_ACCESS_INDEX_READ_BIT specifies read access to an index buffer
|
|
as part of an indexed drawing command, bound by
|
|
flink:vkCmdBindIndexBuffer.
|
|
* ename:VK_ACCESS_VERTEX_ATTRIBUTE_READ_BIT specifies read access to a
|
|
vertex buffer as part of a drawing command, bound by
|
|
flink:vkCmdBindVertexBuffers.
|
|
* ename:VK_ACCESS_UNIFORM_READ_BIT specifies read access to a
|
|
<<descriptorsets-uniformbuffer, uniform buffer>>.
|
|
* ename:VK_ACCESS_INPUT_ATTACHMENT_READ_BIT specifies read access to an
|
|
<<renderpass, input attachment>> within a renderpass during fragment
|
|
shading.
|
|
* ename:VK_ACCESS_SHADER_READ_BIT specifies read access to a
|
|
<<descriptorsets-storagebuffer, storage buffer>>,
|
|
<<descriptorsets-uniformtexelbuffer, uniform texel buffer>>,
|
|
<<descriptorsets-storagetexelbuffer, storage texel buffer>>,
|
|
<<descriptorsets-sampledimage, sampled image>>, or
|
|
<<descriptorsets-storageimage, storage image>>.
|
|
* ename:VK_ACCESS_SHADER_WRITE_BIT specifies write access to a
|
|
<<descriptorsets-storagebuffer, storage buffer>>,
|
|
<<descriptorsets-storagetexelbuffer, storage texel buffer>>, or
|
|
<<descriptorsets-storageimage, storage image>>.
|
|
* ename:VK_ACCESS_COLOR_ATTACHMENT_READ_BIT specifies read access to a
|
|
<<renderpass, color attachment>>, such as via <<framebuffer-blending,
|
|
blending>>, <<framebuffer-logicop, logic operations>>, or via certain
|
|
<<renderpass-load-store-ops, subpass load operations>>.
|
|
ifdef::VK_EXT_blend_operation_advanced[]
|
|
It does not include <<framebuffer-blend-advanced,advanced blend
|
|
operations>>.
|
|
* ename:VK_ACCESS_COLOR_ATTACHMENT_READ_NONCOHERENT_BIT_EXT is similar to
|
|
ename:VK_ACCESS_COLOR_ATTACHMENT_READ_BIT, but also includes
|
|
<<framebuffer-blend-advanced,advanced blend operations>>.
|
|
endif::VK_EXT_blend_operation_advanced[]
|
|
* ename:VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT specifies write access to a
|
|
<<renderpass, color or resolve attachment>> during a <<renderpass,
|
|
render pass>> or via certain <<renderpass-load-store-ops, subpass load
|
|
and store operations>>.
|
|
* ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_READ_BIT specifies read access
|
|
to a <<renderpass, depth/stencil attachment>>, via <<fragops-ds-state,
|
|
depth or stencil operations>> or via certain
|
|
<<renderpass-load-store-ops, subpass load operations>>.
|
|
* ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT specifies write
|
|
access to a <<renderpass, depth/stencil attachment>>, via
|
|
<<fragops-ds-state, depth or stencil operations>> or via certain
|
|
<<renderpass-load-store-ops, subpass load and store operations>>.
|
|
* ename:VK_ACCESS_TRANSFER_READ_BIT specifies read access to an image or
|
|
buffer in a <<copies, copy>> operation.
|
|
* ename:VK_ACCESS_TRANSFER_WRITE_BIT specifies write access to an image or
|
|
buffer in a <<clears, clear>> or <<copies, copy>> operation.
|
|
* ename:VK_ACCESS_HOST_READ_BIT specifies read access by a host operation.
|
|
Accesses of this type are not performed through a resource, but directly
|
|
on memory.
|
|
* ename:VK_ACCESS_HOST_WRITE_BIT specifies write access by a host
|
|
operation.
|
|
Accesses of this type are not performed through a resource, but directly
|
|
on memory.
|
|
* ename:VK_ACCESS_MEMORY_READ_BIT specifies read access via non-specific
|
|
entities.
|
|
These entities include the Vulkan device and host, but may: also include
|
|
entities external to the Vulkan device or otherwise not part of the core
|
|
Vulkan pipeline.
|
|
When included in a destination access mask, makes all available writes
|
|
visible to all future read accesses on entities known to the Vulkan
|
|
device.
|
|
* ename:VK_ACCESS_MEMORY_WRITE_BIT specifies write access via non-specific
|
|
entities.
|
|
These entities include the Vulkan device and host, but may: also include
|
|
entities external to the Vulkan device or otherwise not part of the core
|
|
Vulkan pipeline.
|
|
When included in a source access mask, all writes that are performed by
|
|
entities known to the Vulkan device are made available.
|
|
When included in a destination access mask, makes all available writes
|
|
visible to all future write accesses on entities known to the Vulkan
|
|
device.
|
|
ifdef::VK_NVX_device_generated_commands[]
|
|
* ename:VK_ACCESS_COMMAND_PROCESS_READ_BIT_NVX specifies reads from
|
|
sname:VkBuffer inputs to flink:vkCmdProcessCommandsNVX.
|
|
* ename:VK_ACCESS_COMMAND_PROCESS_WRITE_BIT_NVX specifies writes to the
|
|
target command buffer in flink:vkCmdProcessCommandsNVX.
|
|
endif::VK_NVX_device_generated_commands[]
|
|
|
|
Certain access types are only performed by a subset of pipeline stages.
|
|
Any synchronization command that takes both stage masks and access masks
|
|
uses both to define the <<synchronization-dependencies-access-scopes, access
|
|
scopes>> - only the specified access types performed by the specified stages
|
|
are included in the access scope.
|
|
An application must: not specify an access flag in a synchronization command
|
|
if it does not include a pipeline stage in the corresponding stage mask that
|
|
is able to perform accesses of that type.
|
|
The following table lists, for each access flag, which pipeline stages can:
|
|
perform that type of access.
|
|
|
|
[[synchronization-access-types-supported]]
|
|
.Supported access types
|
|
[cols="50,50",options="header"]
|
|
|====
|
|
|Access flag | Supported pipeline stages
|
|
|ename:VK_ACCESS_INDIRECT_COMMAND_READ_BIT | ename:VK_PIPELINE_STAGE_DRAW_INDIRECT_BIT
|
|
|ename:VK_ACCESS_INDEX_READ_BIT | ename:VK_PIPELINE_STAGE_VERTEX_INPUT_BIT
|
|
|ename:VK_ACCESS_VERTEX_ATTRIBUTE_READ_BIT | ename:VK_PIPELINE_STAGE_VERTEX_INPUT_BIT
|
|
|ename:VK_ACCESS_UNIFORM_READ_BIT | ename:VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT, ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT, ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT, ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT, or ename:VK_PIPELINE_STAGE_COMPUTE_SHADER_BIT
|
|
|ename:VK_ACCESS_INPUT_ATTACHMENT_READ_BIT | ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT
|
|
|ename:VK_ACCESS_SHADER_READ_BIT | ename:VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT, ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT, ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT, ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT, or ename:VK_PIPELINE_STAGE_COMPUTE_SHADER_BIT
|
|
|ename:VK_ACCESS_SHADER_WRITE_BIT | ename:VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT, ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT, ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT, ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT, or ename:VK_PIPELINE_STAGE_COMPUTE_SHADER_BIT
|
|
|ename:VK_ACCESS_COLOR_ATTACHMENT_READ_BIT | ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
|
|
ifdef::VK_EXT_blend_operation_advanced[]
|
|
|ename:VK_ACCESS_COLOR_ATTACHMENT_READ_NONCOHERENT_BIT_EXT | ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
|
|
endif::VK_EXT_blend_operation_advanced[]
|
|
|ename:VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT | ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
|
|
|ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_READ_BIT | ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT, or ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT
|
|
|ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT | ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT, or ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT
|
|
|ename:VK_ACCESS_TRANSFER_READ_BIT | ename:VK_PIPELINE_STAGE_TRANSFER_BIT
|
|
|ename:VK_ACCESS_TRANSFER_WRITE_BIT | ename:VK_PIPELINE_STAGE_TRANSFER_BIT
|
|
|ename:VK_ACCESS_HOST_READ_BIT | ename:VK_PIPELINE_STAGE_HOST_BIT
|
|
|ename:VK_ACCESS_HOST_WRITE_BIT | ename:VK_PIPELINE_STAGE_HOST_BIT
|
|
|ename:VK_ACCESS_MEMORY_READ_BIT | N/A
|
|
|ename:VK_ACCESS_MEMORY_WRITE_BIT | N/A
|
|
ifdef::VK_NVX_device_generated_commands[]
|
|
|ename:VK_ACCESS_COMMAND_PROCESS_READ_BIT_NVX | ename:VK_PIPELINE_STAGE_COMMAND_PROCESS_BIT_NVX
|
|
|ename:VK_ACCESS_COMMAND_PROCESS_WRITE_BIT_NVX | ename:VK_PIPELINE_STAGE_COMMAND_PROCESS_BIT_NVX
|
|
endif::VK_NVX_device_generated_commands[]
|
|
|====
|
|
|
|
[[synchronization-host-access-types]]
|
|
If a memory object does not have the
|
|
ename:VK_MEMORY_PROPERTY_HOST_COHERENT_BIT property, then
|
|
flink:vkFlushMappedMemoryRanges must: be called in order to guarantee that
|
|
writes to the memory object from the host are made visible to the
|
|
ename:VK_ACCESS_HOST_WRITE_BIT <<synchronization-access-types, access
|
|
type>>, where it can: be further made available to the device by
|
|
<<synchronization, synchronization commands>>.
|
|
Similarly, flink:vkInvalidateMappedMemoryRanges must: be called to guarantee
|
|
that writes which are visible to the ename:VK_ACCESS_HOST_READ_BIT
|
|
<<synchronization-access-types, access type>> are made visible to host
|
|
operations.
|
|
|
|
If the memory object does have the
|
|
ename:VK_MEMORY_PROPERTY_HOST_COHERENT_BIT property flag, writes to the
|
|
memory object from the host are automatically made visible to the
|
|
ename:VK_ACCESS_HOST_WRITE_BIT <<synchronization-access-types,access type>>.
|
|
Similarly, writes made visible to the ename:VK_ACCESS_HOST_READ_BIT
|
|
<<synchronization-access-types, access type>> are automatically made visible
|
|
to the host.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
The flink:vkQueueSubmit command <<synchronization-submission-host-writes,
|
|
automatically guarantees that host writes flushed to
|
|
ename:VK_ACCESS_HOST_WRITE_BIT are made available>> if they were flushed
|
|
before the command executed, so in most cases an explicit memory barrier is
|
|
not needed for this case.
|
|
In the few circumstances where a submit does not occur between the host
|
|
write and the device read access, writes can: be made available by using an
|
|
explicit memory barrier.
|
|
====
|
|
|
|
--
|
|
|
|
|
|
[[synchronization-framebuffer-regions]]
|
|
=== Framebuffer Region Dependencies
|
|
|
|
<<synchronization-pipeline-stages, Pipeline stages>> that operate on, or
|
|
with respect to, the framebuffer are collectively the _framebuffer-space_
|
|
pipeline stages.
|
|
These stages are:
|
|
|
|
* ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT
|
|
* ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT
|
|
* ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT
|
|
* ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
|
|
|
|
For these pipeline stages, an execution or memory dependency from the first
|
|
set of operations to the second set can: either be a single
|
|
_framebuffer-global_ dependency, or split into multiple _framebuffer-local_
|
|
dependencies.
|
|
A dependency with non-framebuffer-space pipeline stages is neither
|
|
framebuffer-global nor framebuffer-local.
|
|
|
|
A _framebuffer region_ is a set of sample (x, y, layer, sample) coordinates
|
|
that is a subset of the entire framebuffer.
|
|
|
|
Both <<synchronization-dependencies-scopes, synchronization scopes>> of a
|
|
framebuffer-local dependency include only the operations performed within
|
|
corresponding framebuffer regions (as defined below).
|
|
No ordering guarantees are made between different framebuffer regions for a
|
|
framebuffer-local dependency.
|
|
|
|
Both <<synchronization-dependencies-scopes, synchronization scopes>> of a
|
|
framebuffer-global dependency include operations on all framebuffer-regions.
|
|
|
|
If the first synchronization scope includes operations on pixels/fragments
|
|
with N samples and the second synchronization scope includes operations on
|
|
pixels/fragments with M samples, where N does not equal M, then a
|
|
framebuffer region containing all samples at a given (x, y, layer)
|
|
coordinate in the first synchronization scope corresponds to a region
|
|
containing all samples at the same coordinate in the second synchronization
|
|
scope.
|
|
In other words, it is a pixel granularity dependency.
|
|
If N equals M, then a framebuffer region containing a single (x, y, layer,
|
|
sample) coordinate in the first synchronization scope corresponds to a
|
|
region containing the same sample at the same coordinate in the second
|
|
synchronization scope.
|
|
In other words, it is a sample granularity dependency.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Since fragment invocations are not specified to run in any particular
|
|
groupings, the size of a framebuffer region is implementation-dependent, not
|
|
known to the application, and must: be assumed to be no larger than
|
|
specified above.
|
|
====
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Practically, the pixel vs sample granularity dependency means that if an
|
|
input attachment has a different number of samples than the pipeline's
|
|
pname:rasterizationSamples, then a fragment can: access any sample in the
|
|
input attachment's pixel even if it only uses framebuffer-local
|
|
dependencies.
|
|
If the input attachment has the same number of samples, then the fragment
|
|
can: only access the covered samples in its input code:SampleMask (i.e. the
|
|
fragment operations happen-after a framebuffer-local dependency for each
|
|
sample the fragment covers).
|
|
To access samples that are not covered, a framebuffer-global dependency is
|
|
required.
|
|
====
|
|
|
|
If a synchronization command includes a pname:dependencyFlags parameter, and
|
|
specifies the ename:VK_DEPENDENCY_BY_REGION_BIT flag, then it defines
|
|
framebuffer-local dependencies for the framebuffer-space pipeline stages in
|
|
that synchronization command, for all framebuffer regions.
|
|
If no pname:dependencyFlags parameter is included, or the
|
|
ename:VK_DEPENDENCY_BY_REGION_BIT flag is not specified, then a
|
|
framebuffer-global dependency is specified for those stages.
|
|
The ename:VK_DEPENDENCY_BY_REGION_BIT flag does not affect the dependencies
|
|
between non-framebuffer-space pipeline stages, nor does it affect the
|
|
dependencies between framebuffer-space and non-framebuffer-space pipeline
|
|
stages.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Framebuffer-local dependencies are more optimal for most architectures;
|
|
particularly tile-based architectures - which can keep framebuffer-regions
|
|
entirely in on-chip registers and thus avoid external bandwidth across such
|
|
a dependency.
|
|
Including a framebuffer-global dependency in your rendering will usually
|
|
force all implementations to flush data to memory, or to a higher level
|
|
cache, breaking any potential locality optimizations.
|
|
====
|
|
|
|
|
|
ifdef::VK_KHX_multiview[]
|
|
|
|
[[synchronization-view-local-dependencies]]
|
|
=== View-Local Dependencies
|
|
|
|
In a render pass instance that has <<renderpass-multiview,multiview>>
|
|
enabled, dependencies can: be either view-local or view-global.
|
|
|
|
A view-local dependency only includes operations from a single
|
|
<<renderpass-multiview-view-local,source view>> from the source subpass in
|
|
the first synchronization scope, and only includes operations from a single
|
|
<<renderpass-multiview-view-local,destination view>> from the destination
|
|
subpass in the second synchronization scope.
|
|
A view-global dependency includes all views in the view mask of the source
|
|
and destination subpasses in the corresponding synchronization scopes.
|
|
|
|
If a synchronization command includes a pname:dependencyFlags parameter and
|
|
specifies the ename:VK_DEPENDENCY_VIEW_LOCAL_BIT_KHX flag, then it defines
|
|
view-local dependencies for that synchronization command, for all views.
|
|
If no pname:dependencyFlags parameter is included or the
|
|
ename:VK_DEPENDENCY_VIEW_LOCAL_BIT_KHX flag is not specified, then a
|
|
view-global dependency is specified.
|
|
|
|
endif::VK_KHX_multiview[]
|
|
|
|
|
|
ifdef::VK_KHX_device_group[]
|
|
|
|
[[synchronization-device-local-dependencies]]
|
|
=== Device-Local Dependencies
|
|
|
|
Dependencies can: be either device-local or non-device-local.
|
|
A device-local dependency acts as multiple separate dependencies, one for
|
|
each physical device that executes the synchronization command, where each
|
|
dependency only includes operations from that physical device in both
|
|
synchronization scopes.
|
|
A non-device-local dependency is a single dependency where both
|
|
synchronization scopes include operations from all physical devices that
|
|
participate in the synchronization command.
|
|
For subpass dependencies, all physical devices in the
|
|
slink:VkDeviceGroupRenderPassBeginInfoKHX::pname:deviceMask participate in
|
|
the dependency, and for pipeline barriers all physical devices that are set
|
|
in the command buffer's current device mask participate in the dependency.
|
|
|
|
If a synchronization command includes a pname:dependencyFlags parameter and
|
|
specifies the ename:VK_DEPENDENCY_DEVICE_GROUP_BIT_KHX flag, then it defines
|
|
a non-device-local dependency for that synchronization command.
|
|
If no pname:dependencyFlags parameter is included or the
|
|
ename:VK_DEPENDENCY_DEVICE_GROUP_BIT_KHX flag is not specified, then it
|
|
defines device-local dependencies for that synchronization command, for all
|
|
participating physical devices.
|
|
|
|
Semaphore and event dependencies are device-local and only execute on the
|
|
one physical device that performs the dependency.
|
|
|
|
endif::VK_KHX_device_group[]
|
|
|
|
|
|
[[synchronization-implicit]]
|
|
== Implicit Synchronization Guarantees
|
|
|
|
A small number of implicit ordering guarantees are provided by Vulkan,
|
|
ensuring that the order in which commands are submitted is meaningful, and
|
|
avoiding unnecessary complexity in common operations.
|
|
|
|
[[synchronization-submission-order]]
|
|
_Submission order_ is a fundamental ordering in Vulkan, giving meaning to
|
|
the order in which <<fundamentals-queueoperation-command-types, action and
|
|
synchronization commands>> are recorded and submitted to a single queue.
|
|
Explicit and implicit ordering guarantees between commands in Vulkan all
|
|
work on the premise that this ordering is meaningful.
|
|
|
|
Submission order for any given set of commands is based on the order in
|
|
which they were recorded to command buffers and then submitted.
|
|
This order is determined as follows:
|
|
|
|
. The initial order is determined by the order in which
|
|
flink:vkQueueSubmit commands are executed on the host, for a single
|
|
queue, from first to last.
|
|
. The order in which slink:VkSubmitInfo structures are specified in the
|
|
pname:pSubmits parameter of flink:vkQueueSubmit, from lowest index to
|
|
highest.
|
|
. The order in which command buffers are specified in the
|
|
pname:pCommandBuffers member of slink:VkSubmitInfo, from lowest index to
|
|
highest.
|
|
. The order in which commands were recorded to a command buffer on the
|
|
host, from first to last:
|
|
** For commands recorded outside a render pass, this includes all other
|
|
commands recorded outside a renderpass, including
|
|
flink:vkCmdBeginRenderPass and flink:vkCmdEndRenderPass commands; it
|
|
does not directly include commands inside a render pass.
|
|
** For commands recorded inside a render pass, this includes all other
|
|
commands recorded inside the same subpass, including the
|
|
flink:vkCmdBeginRenderPass and flink:vkCmdEndRenderPass commands that
|
|
delimit the same renderpass instance; it does not include commands
|
|
recorded to other subpasses.
|
|
|
|
<<fundamentals-queueoperation-command-types, Action and synchronization
|
|
commands>> recorded to a command buffer execute the
|
|
ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT pipeline stage in
|
|
<<synchronization-submission-order, submission order>> - forming an implicit
|
|
execution dependency between this stage in each command.
|
|
|
|
<<fundamentals-queueoperation-command-types, State commands>> do not execute
|
|
any operations on the device, instead they set the state of the command
|
|
buffer when they execute on the host, in the order that they are recorded.
|
|
<<fundamentals-queueoperation-command-types, Action commands>> consume the
|
|
current state of the command buffer when they are recorded, and will execute
|
|
state changes on the device as required to match the recorded state.
|
|
|
|
<<queries-order, Query commands>>, <<drawing-primitive-order, the order of
|
|
primitives passing through the graphics pipeline>> and
|
|
<<synchronization-image-barrier-layout-transition-order, image layout
|
|
transitions as part of an image memory barrier>> provide additional
|
|
guarantees based on submission order.
|
|
|
|
Execution of <<synchronization-pipeline-stages-order, pipeline stages>>
|
|
within a given command also has a loose ordering, dependent only on a single
|
|
command.
|
|
|
|
|
|
[[synchronization-fences]]
|
|
== Fences
|
|
|
|
[open,refpage='VkFence',desc='Opaque handle to a fence object',type='handles']
|
|
--
|
|
|
|
Fences are a synchronization primitive that can: be used to insert a
|
|
dependency from a queue to the host.
|
|
Fences have two states - signaled and unsignaled.
|
|
A fence can: be signaled as part of the execution of a
|
|
<<devsandqueues-submission, queue submission>> command.
|
|
Fences can: be unsignaled on the host with flink:vkResetFences.
|
|
Fences can: be waited on by the host with the flink:vkWaitForFences command,
|
|
and the current state can: be queried with flink:vkGetFenceStatus.
|
|
|
|
ifdef::VK_KHR_external_fence[]
|
|
[[synchronization-fences-payloads]]
|
|
As with most objects in Vulkan, fences are an interface to internal data
|
|
which is typically opaque to applications.
|
|
This internal data is referred to as a fence's _payload_.
|
|
|
|
However, in order to enable communication with agents outside of the current
|
|
device, it is necessary to be able to export that payload to a commonly
|
|
understood format, and subsequently import from that format as well.
|
|
|
|
The internal data of a fence may: include a reference to any resources and
|
|
pending work associated with signal or unsignal operations performed on that
|
|
fence object.
|
|
Mechanisms to import and export that internal data to and from fences are
|
|
provided <<VkExportFenceCreateInfoKHR, below>>.
|
|
These mechanisms indirectly enable applications to share fence state between
|
|
two or more fences and other synchronization primitives across process and
|
|
API boundaries.
|
|
|
|
endif::VK_KHR_external_fence[]
|
|
|
|
Fences are represented by sname:VkFence handles:
|
|
|
|
include::../api/handles/VkFence.txt[]
|
|
|
|
--
|
|
|
|
[open,refpage='vkCreateFence',desc='Create a new fence object',type='protos']
|
|
--
|
|
|
|
To create a fence, call:
|
|
|
|
include::../api/protos/vkCreateFence.txt[]
|
|
|
|
* pname:device is the logical device that creates the fence.
|
|
* pname:pCreateInfo is a pointer to an instance of the
|
|
sname:VkFenceCreateInfo structure which contains information about how
|
|
the fence is to be created.
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
* pname:pFence points to a handle in which the resulting fence object is
|
|
returned.
|
|
|
|
include::../validity/protos/vkCreateFence.txt[]
|
|
--
|
|
|
|
[open,refpage='VkFenceCreateInfo',desc='Structure specifying parameters of a newly created fence',type='structs']
|
|
--
|
|
|
|
The sname:VkFenceCreateInfo structure is defined as:
|
|
|
|
include::../api/structs/VkFenceCreateInfo.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:flags is a bitmask of elink:VkFenceCreateFlagBits specifying the
|
|
initial state and behavior of the fence.
|
|
|
|
include::../validity/structs/VkFenceCreateInfo.txt[]
|
|
--
|
|
|
|
[open,refpage='VkFenceCreateFlagBits',desc='Bitmask specifying initial state and behavior of a fence',type='enums']
|
|
--
|
|
|
|
include::../api/enums/VkFenceCreateFlagBits.txt[]
|
|
|
|
* ename:VK_FENCE_CREATE_SIGNALED_BIT specifies that the fence object is
|
|
created in the signaled state.
|
|
Otherwise, it is created in the unsignaled state.
|
|
|
|
--
|
|
|
|
ifdef::VK_KHR_external_fence[]
|
|
|
|
[open,refpage='VkExportFenceCreateInfoKHR',desc='Structure specifying handle types that can be exported from a fence',type='structs']
|
|
--
|
|
|
|
To create a fence whose payload can: be exported to external handles, add
|
|
the slink:VkExportFenceCreateInfoKHR structure to the pname:pNext chain of
|
|
the slink:VkFenceCreateInfo structure.
|
|
The sname:VkExportFenceCreateInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkExportFenceCreateInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:handleTypes is a bitmask of
|
|
elink:VkExternalFenceHandleTypeFlagBitsKHR specifying one or more fence
|
|
handle types the application can: export from the resulting fence.
|
|
The application can: request multiple handle types for the same fence.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkExportFenceCreateInfoKHR-handleTypes-01446]]
|
|
The bits in pname:handleTypes must be supported and compatible, as
|
|
reported by slink:VkExternalFencePropertiesKHR.
|
|
****
|
|
|
|
include::../validity/structs/VkExportFenceCreateInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_fence[]
|
|
|
|
ifdef::VK_KHR_external_fence_win32[]
|
|
|
|
[open,refpage='VkExportFenceWin32HandleInfoKHR',desc='Structure specifying additional attributes of Windows handles exported from a fence',type='structs']
|
|
--
|
|
|
|
To specify additional attributes of NT handles exported from a fence, add
|
|
the slink:VkExportFenceWin32HandleInfoKHR structure to the pname:pNext chain
|
|
of the slink:VkFenceCreateInfo structure.
|
|
The sname:VkExportFenceWin32HandleInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkExportFenceWin32HandleInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:pAttributes is a pointer to a Windows code:SECURITY_ATTRIBUTES
|
|
structure specifying security attributes of the handle.
|
|
* pname:dwAccess is a code:DWORD specifying access rights of the handle.
|
|
* pname:name is a NULL-terminated UTF-16 string to associate with the
|
|
underlying synchronization primitive referenced by NT handles exported
|
|
from the created fence.
|
|
|
|
If this structure is not present, or if pname:pAttributes is set to `NULL`,
|
|
default security descriptor values will be used, and child processes created
|
|
by the application will not inherit the handle, as described in the MSDN
|
|
documentation for "`Synchronization Object Security and Access Rights`"^1^.
|
|
Further, if the structure is not present, the access rights will be
|
|
|
|
code:DXGI_SHARED_RESOURCE_READ | code:DXGI_SHARED_RESOURCE_WRITE
|
|
|
|
for handles of the following types:
|
|
|
|
ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR
|
|
|
|
1::
|
|
https://msdn.microsoft.com/en-us/library/windows/desktop/ms686670.aspx
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkExportFenceWin32HandleInfoKHR-handleTypes-01447]]
|
|
If slink:VkExportFenceCreateInfoKHR::pname:handleTypes does not include
|
|
ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR,
|
|
VkExportFenceWin32HandleInfoKHR must: not be in the pname:pNext chain of
|
|
slink:VkFenceCreateInfo.
|
|
****
|
|
|
|
include::../validity/structs/VkExportFenceWin32HandleInfoKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='vkGetFenceWin32HandleKHR',desc='Get a Windows HANDLE for a fence',type='protos']
|
|
--
|
|
|
|
To export a Windows handle representing the state of a fence, call:
|
|
|
|
include::../api/protos/vkGetFenceWin32HandleKHR.txt[]
|
|
|
|
* pname:device is the logical device that created the fence being
|
|
exported.
|
|
* pname:pGetWin32HandleInfo is a pointer to an instance of the
|
|
slink:VkFenceGetWin32HandleInfoKHR structure containing parameters of
|
|
the export operation.
|
|
* pname:pHandle will return the Windows handle representing the fence
|
|
state.
|
|
|
|
For handle types defined as NT handles, the handles returned by
|
|
fname:vkGetFenceWin32HandleKHR are owned by the application.
|
|
To avoid leaking resources, the application must: release ownership of them
|
|
using the fname:CloseHandle system call when they are no longer needed.
|
|
|
|
Exporting a Windows handle from a fence may: have side effects depending on
|
|
the transference of the specified handle type, as described in
|
|
<<synchronization-fences-importing,Importing Fence Payloads>>.
|
|
|
|
include::../validity/protos/vkGetFenceWin32HandleKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='VkFenceGetWin32HandleInfoKHR',desc='Structure describing a Win32 handle fence export operation',type='structs']
|
|
--
|
|
|
|
The sname:VkFenceGetWin32HandleInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkFenceGetWin32HandleInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:fence is the fence from which state will be exported.
|
|
* pname:handleType is the type of handle requested.
|
|
|
|
The properties of the handle returned depend on the value of
|
|
pname:handleType.
|
|
See elink:VkExternalFenceHandleTypeFlagBitsKHR for a description of the
|
|
properties of the defined external fence handle types.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkFenceGetWin32HandleInfoKHR-handleType-01448]]
|
|
pname:handleType must: have been included in
|
|
slink:VkExportFenceCreateInfoKHR::pname:handleTypes when the
|
|
pname:fence's current payload was created.
|
|
* [[VUID-VkFenceGetWin32HandleInfoKHR-handleType-01449]]
|
|
If pname:handleType is defined as an NT handle,
|
|
flink:vkGetFenceWin32HandleKHR must: be called no more than once for
|
|
each valid unique combination of pname:fence and pname:handleType.
|
|
* [[VUID-VkFenceGetWin32HandleInfoKHR-fence-01450]]
|
|
pname:fence must: not currently have its payload replaced by an imported
|
|
payload as described below in
|
|
<<synchronization-fences-importing,Importing Fence Payloads>> unless
|
|
that imported payload's handle type was included in
|
|
slink:VkExternalFencePropertiesKHR::pname:exportFromImportedHandleTypes
|
|
for pname:handleType.
|
|
* [[VUID-VkFenceGetWin32HandleInfoKHR-handleType-01451]]
|
|
If pname:handleType refers to a handle type with copy payload
|
|
transference semantics, pname:fence must: be signaled, or have an
|
|
associated <<synchronization-fences-signaling,fence signal operation>>
|
|
pending execution.
|
|
* [[VUID-VkFenceGetWin32HandleInfoKHR-handleType-01452]]
|
|
pname:handleType must: be defined as an NT handle or a global share
|
|
handle.
|
|
****
|
|
|
|
include::../validity/structs/VkFenceGetWin32HandleInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_fence_win32[]
|
|
|
|
ifdef::VK_KHR_external_fence_fd[]
|
|
|
|
[open,refpage='vkGetFenceFdKHR',desc='Get a POSIX file descriptor handle for a fence',type='protos']
|
|
--
|
|
|
|
To export a POSIX file descriptor representing the payload of a fence, call:
|
|
|
|
include::../api/protos/vkGetFenceFdKHR.txt[]
|
|
|
|
* pname:device is the logical device that created the fence being
|
|
exported.
|
|
* pname:pGetFdInfo is a pointer to an instance of the
|
|
slink:VkFenceGetFdInfoKHR structure containing parameters of the export
|
|
operation.
|
|
* pname:pFd will return the file descriptor representing the fence
|
|
payload.
|
|
|
|
Each call to fname:vkGetFenceFdKHR must: create a new file descriptor and
|
|
transfer ownership of it to the application.
|
|
To avoid leaking resources, the application must: release ownership of the
|
|
file descriptor when it is no longer needed.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Ownership can be released in many ways.
|
|
For example, the application can call fname:close() on the file descriptor,
|
|
or transfer ownership back to Vulkan by using the file descriptor to import
|
|
a fence payload.
|
|
====
|
|
|
|
If pname:pGetFdInfo::pname:handleType is
|
|
ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_SYNC_FD_BIT_KHR and the fence is
|
|
signaled at the time `vkGetFenceFdKHR` is called, pname:pFd may: return the
|
|
value `-1` instead of a valid file descriptor.
|
|
|
|
Where supported by the operating system, the implementation must: set the
|
|
file descriptor to be closed automatically when an fname:execve system call
|
|
is made.
|
|
|
|
Exporting a file descriptor from a fence may: have side effects depending on
|
|
the transference of the specified handle type, as described in
|
|
<<synchronization-fences-importing,Importing Fence State>>.
|
|
|
|
include::../validity/protos/vkGetFenceFdKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='VkFenceGetFdInfoKHR',desc='Structure describing a POSIX FD fence export operation',type='structs']
|
|
--
|
|
|
|
The sname:VkFenceGetFdInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkFenceGetFdInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:fence is the fence from which state will be exported.
|
|
* pname:handleType is the type of handle requested.
|
|
|
|
The properties of the file descriptor returned depend on the value of
|
|
pname:handleType.
|
|
See elink:VkExternalFenceHandleTypeFlagBitsKHR for a description of the
|
|
properties of the defined external fence handle types.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkFenceGetFdInfoKHR-handleType-01453]]
|
|
pname:handleType must: have been included in
|
|
slink:VkExportFenceCreateInfoKHR::pname:handleTypes when pname:fence's
|
|
current payload was created.
|
|
* [[VUID-VkFenceGetFdInfoKHR-handleType-01454]]
|
|
If pname:handleType refers to a handle type with copy payload
|
|
transference semantics, pname:fence must: be signaled, or have an
|
|
associated <<synchronization-fences-signaling,fence signal operation>>
|
|
pending execution.
|
|
* [[VUID-VkFenceGetFdInfoKHR-fence-01455]]
|
|
pname:fence must: not currently have its payload replaced by an imported
|
|
payload as described below in
|
|
<<synchronization-fences-importing,Importing Fence Payloads>> unless
|
|
that imported payload's handle type was included in
|
|
slink:VkExternalFencePropertiesKHR::pname:exportFromImportedHandleTypes
|
|
for pname:handleType.
|
|
* [[VUID-VkFenceGetFdInfoKHR-handleType-01456]]
|
|
pname:handleType must: be defined as a POSIX file descriptor handle.
|
|
****
|
|
|
|
include::../validity/structs/VkFenceGetFdInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_fence_fd[]
|
|
|
|
[open,refpage='vkDestroyFence',desc='Destroy a fence object',type='protos']
|
|
--
|
|
|
|
To destroy a fence, call:
|
|
|
|
include::../api/protos/vkDestroyFence.txt[]
|
|
|
|
* pname:device is the logical device that destroys the fence.
|
|
* pname:fence is the handle of the fence to destroy.
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkDestroyFence-fence-01120]]
|
|
All <<devsandqueues-submission, queue submission>> commands that refer
|
|
to pname:fence must: have completed execution
|
|
* [[VUID-vkDestroyFence-fence-01121]]
|
|
If sname:VkAllocationCallbacks were provided when pname:fence was
|
|
created, a compatible set of callbacks must: be provided here
|
|
* [[VUID-vkDestroyFence-fence-01122]]
|
|
If no sname:VkAllocationCallbacks were provided when pname:fence was
|
|
created, pname:pAllocator must: be `NULL`
|
|
****
|
|
|
|
include::../validity/protos/vkDestroyFence.txt[]
|
|
--
|
|
|
|
[open,refpage='vkGetFenceStatus',desc='Return the status of a fence',type='protos']
|
|
--
|
|
|
|
To query the status of a fence from the host, call:
|
|
|
|
include::../api/protos/vkGetFenceStatus.txt[]
|
|
|
|
* pname:device is the logical device that owns the fence.
|
|
* pname:fence is the handle of the fence to query.
|
|
|
|
Upon success, fname:vkGetFenceStatus returns the status of the fence object,
|
|
with the following return codes:
|
|
|
|
.Fence Object Status Codes
|
|
[width="80%",options="header"]
|
|
|====
|
|
| Status | Meaning
|
|
| ename:VK_SUCCESS | The fence specified by pname:fence is signaled.
|
|
| ename:VK_NOT_READY | The fence specified by pname:fence is unsignaled.
|
|
| ename:VK_ERROR_DEVICE_LOST | The device has been lost. See <<devsandqueues-lost-device,Lost Device>>.
|
|
|====
|
|
|
|
If a <<devsandqueues-submission, queue submission>> command is pending
|
|
execution, then the value returned by this command may: immediately be out
|
|
of date.
|
|
|
|
If the device has been lost (see <<devsandqueues-lost-device,Lost Device>>),
|
|
fname:vkGetFenceStatus may: return any of the above status codes.
|
|
If the device has been lost and fname:vkGetFenceStatus is called repeatedly,
|
|
it will eventually return either ename:VK_SUCCESS or
|
|
ename:VK_ERROR_DEVICE_LOST.
|
|
|
|
include::../validity/protos/vkGetFenceStatus.txt[]
|
|
--
|
|
|
|
[[synchronization-fences-unsignaling]]
|
|
[open,refpage='vkResetFences',desc='Resets one or more fence objects',type='protos']
|
|
--
|
|
|
|
To set the state of fences to unsignaled from the host, call:
|
|
|
|
include::../api/protos/vkResetFences.txt[]
|
|
|
|
* pname:device is the logical device that owns the fences.
|
|
* pname:fenceCount is the number of fences to reset.
|
|
* pname:pFences is a pointer to an array of fence handles to reset.
|
|
|
|
ifdef::VK_KHR_external_fence[]
|
|
|
|
If any member of pname:pFences currently has its
|
|
<<synchronization-fences-importing, payload imported>> with temporary
|
|
permanence, that fence's prior permanent payload is first restored.
|
|
The remaining operations described therefore operate on the restored
|
|
payload.
|
|
|
|
endif::VK_KHR_external_fence[]
|
|
|
|
When flink:vkResetFences is executed on the host, it defines a _fence
|
|
unsignal operation_ for each fence, which resets the fence to the unsignaled
|
|
state.
|
|
|
|
If any member of pname:pFences is already in the unsignaled state when
|
|
flink:vkResetFences is executed, then flink:vkResetFences has no effect on
|
|
that fence.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkResetFences-pFences-01123]]
|
|
Each element of pname:pFences must: not be currently associated with any
|
|
queue command that has not yet completed execution on that queue
|
|
****
|
|
|
|
include::../validity/protos/vkResetFences.txt[]
|
|
--
|
|
|
|
[[synchronization-fences-signaling]]
|
|
When a fence is submitted to a queue as part of a
|
|
<<devsandqueues-submission, queue submission>> command, it defines a memory
|
|
dependency on the batches that were submitted as part of that command, and
|
|
defines a _fence signal operation_ which sets the fence to the signaled
|
|
state.
|
|
|
|
The first <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes every batch submitted in the same <<devsandqueues-submission, queue
|
|
submission>> command.
|
|
Fence signal operations that are defined by flink:vkQueueSubmit additionally
|
|
include in the first synchronization scope all previous queue submissions to
|
|
the same queue via flink:vkQueueSubmit.
|
|
|
|
The second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
only includes the fence signal operation.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>>
|
|
includes all memory access performed by the device.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>> is
|
|
empty.
|
|
|
|
[open,refpage='vkWaitForFences',desc='Wait for one or more fences to become signaled',type='protos']
|
|
--
|
|
|
|
To wait for one or more fences to enter the signaled state on the host,
|
|
call:
|
|
|
|
include::../api/protos/vkWaitForFences.txt[]
|
|
|
|
* pname:device is the logical device that owns the fences.
|
|
* pname:fenceCount is the number of fences to wait on.
|
|
* pname:pFences is a pointer to an array of pname:fenceCount fence
|
|
handles.
|
|
* pname:waitAll is the condition that must: be satisfied to successfully
|
|
unblock the wait.
|
|
If pname:waitAll is ename:VK_TRUE, then the condition is that all fences
|
|
in pname:pFences are signaled.
|
|
Otherwise, the condition is that at least one fence in pname:pFences is
|
|
signaled.
|
|
* pname:timeout is the timeout period in units of nanoseconds.
|
|
pname:timeout is adjusted to the closest value allowed by the
|
|
implementation-dependent timeout accuracy, which may: be substantially
|
|
longer than one nanosecond, and may: be longer than the requested
|
|
period.
|
|
|
|
If the condition is satisfied when fname:vkWaitForFences is called, then
|
|
fname:vkWaitForFences returns immediately.
|
|
If the condition is not satisfied at the time fname:vkWaitForFences is
|
|
called, then fname:vkWaitForFences will block and wait up to pname:timeout
|
|
nanoseconds for the condition to become satisfied.
|
|
|
|
If pname:timeout is zero, then fname:vkWaitForFences does not wait, but
|
|
simply returns the current state of the fences.
|
|
ename:VK_TIMEOUT will be returned in this case if the condition is not
|
|
satisfied, even though no actual wait was performed.
|
|
|
|
If the specified timeout period expires before the condition is satisfied,
|
|
fname:vkWaitForFences returns ename:VK_TIMEOUT.
|
|
If the condition is satisfied before pname:timeout nanoseconds has expired,
|
|
fname:vkWaitForFences returns ename:VK_SUCCESS.
|
|
|
|
If device loss occurs (see <<devsandqueues-lost-device,Lost Device>>) before
|
|
the timeout has expired, fname:vkWaitForFences must: return in finite time
|
|
with either ename:VK_SUCCESS or ename:VK_ERROR_DEVICE_LOST.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
While we guarantee that fname:vkWaitForFences must: return in finite time,
|
|
no guarantees are made that it returns immediately upon device loss.
|
|
However, the client can reasonably expect that the delay will be on the
|
|
order of seconds and that calling fname:vkWaitForFences will not result in a
|
|
permanently (or seemingly permanently) dead process.
|
|
====
|
|
|
|
include::../validity/protos/vkWaitForFences.txt[]
|
|
--
|
|
|
|
[[synchronization-fences-waiting]]
|
|
An execution dependency is defined by waiting for a fence to become
|
|
signaled, either via flink:vkWaitForFences or by polling on
|
|
flink:vkGetFenceStatus.
|
|
|
|
The first <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes only the fence signal operation.
|
|
|
|
The second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes the host operations of flink:vkWaitForFences or
|
|
flink:vkGetFenceStatus indicating that the fence has become signaled.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Signaling a fence and waiting on the host does not guarantee that the
|
|
results of memory accesses will be visible to the host, as the access scope
|
|
of a memory dependency defined by a fence only includes device access.
|
|
A <<synchronization-memory-barriers, memory barrier>> or other memory
|
|
dependency must: be used to guarantee this.
|
|
See the description of <<synchronization-host-access-types, host access
|
|
types>> for more information.
|
|
====
|
|
|
|
ifdef::VK_EXT_display_control[]
|
|
include::VK_EXT_display_control/fence_events.txt[]
|
|
endif::VK_EXT_display_control[]
|
|
|
|
|
|
ifdef::VK_KHR_external_fence[]
|
|
|
|
[[synchronization-fences-importing]]
|
|
=== Importing Fence Payloads
|
|
|
|
Applications can: import a fence payload into an existing fence using an
|
|
external fence handle.
|
|
The effects of the import operation will be either temporary or permanent,
|
|
as specified by the application.
|
|
If the import is temporary, the fence will be _restored_ to its permanent
|
|
state the next time that fence is passed to flink:vkResetFences.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Restoring a fence to its prior permanent payload is a distinct operation
|
|
from resetting a fence payload.
|
|
See flink:vkResetFences for more detail.
|
|
====
|
|
|
|
Performing a subsequent temporary import on a fence before resetting it has
|
|
no effect on this requirement; the next unsignal of the fence must: still
|
|
restore its last permanent state.
|
|
A permanent payload import behaves as if the target fence was destroyed, and
|
|
a new fence was created with the same handle but the imported payload.
|
|
Because importing a fence payload temporarily or permanently detaches the
|
|
existing payload from a fence, similar usage restrictions to those applied
|
|
to fname:vkDestroyFence are applied to any command that imports a fence
|
|
payload.
|
|
Which of these import types is used is referred to as the import operation's
|
|
_permanence_.
|
|
Each handle type supports either one or both types of permanence.
|
|
|
|
The implementation must: perform the import operation by either referencing
|
|
or copying the payload referred to by the specified external fence handle,
|
|
depending on the handle's type.
|
|
The import method used is referred to as the handle type's _transference_.
|
|
When using handle types with reference transference, importing a payload to
|
|
a fence adds the fence to the set of all fences sharing that payload.
|
|
This set includes the fence from which the payload was exported.
|
|
Fence signaling, waiting, and resetting operations performed on any fence in
|
|
the set must: behave as if the set were a single fence.
|
|
Importing a payload using handle types with copy transference creates a
|
|
duplicate copy of the payload at the time of import, but makes no further
|
|
reference to it.
|
|
Fence signaling, waiting, and resetting operations performed on the target
|
|
of copy imports must: not affect any other fence or payload.
|
|
|
|
Export operations have the same transference as the specified handle type's
|
|
import operations.
|
|
Additionally, exporting a fence payload to a handle with copy transference
|
|
has the same side effects on the source fence's payload as executing a fence
|
|
reset operation.
|
|
If the fence was using a temporarily imported payload, the fence's prior
|
|
permanent payload will be restored.
|
|
|
|
ifdef::VK_KHR_external_fence_win32,VK_KHR_external_fence_fd[]
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
The
|
|
ifdef::VK_KHR_external_fence_win32+VK_KHR_external_fence_fd[tables]
|
|
ifndef::VK_KHR_external_fence_win32+VK_KHR_external_fence_fd[table]
|
|
ifdef::VK_KHR_external_fence_win32[]
|
|
<<synchronization-fence-handletypes-win32,Handle Types Supported by
|
|
VkImportFenceWin32HandleInfoKHR>>
|
|
endif::VK_KHR_external_fence_win32[]
|
|
ifdef::VK_KHR_external_fence_win32+VK_KHR_external_fence_fd[and]
|
|
ifdef::VK_KHR_external_fence_fd[]
|
|
<<synchronization-fence-handletypes-fd,Handle Types Supported by
|
|
VkImportFenceFdInfoKHR>>
|
|
endif::VK_KHR_external_fence_fd[]
|
|
ifdef::VK_KHR_external_fence_win32+VK_KHR_external_fence_fd[define]
|
|
ifndef::VK_KHR_external_fence_win32+VK_KHR_external_fence_fd[defines]
|
|
the permanence and transference of each handle type.
|
|
====
|
|
endif::VK_KHR_external_fence_win32,VK_KHR_external_fence_fd[]
|
|
|
|
<<fundamentals-threadingbehavior,External synchronization>> allows
|
|
implementations to modify an object's internal state, i.e. payload, without
|
|
internal synchronization.
|
|
However, for fences sharing a payload across processes, satisfying the
|
|
external synchronization requirements of fname:VkFence parameters as if all
|
|
fences in the set were the same object is sometimes infeasible.
|
|
Satisfying valid usage constraints on the state of a fence would similarly
|
|
require impractical coordination or levels of trust between processes.
|
|
Therefore, these constraints only apply to a specific fence handle, not to
|
|
its payload.
|
|
For distinct fence objects which share a payload:
|
|
|
|
* If multiple commands which queue a signal operation, or which unsignal a
|
|
fence, are called concurrently, behavior will be as if the commands were
|
|
called in an arbitrary sequential order.
|
|
* If a queue submission command is called with a fence that is sharing a
|
|
payload, and the payload is already associated with another queue command
|
|
that has not yet completed execution, either one or both of the commands
|
|
will cause the fence to become signaled when they complete execution.
|
|
* If a fence payload is reset while it is associated with a queue command
|
|
that has not yet completed execution, the payload will become unsignaled,
|
|
but may: become signaled again when the command completes execution.
|
|
* In the preceding cases, any of the devices associated with the fences
|
|
sharing the payload may: be lost, or any of the queue submission or fence
|
|
reset commands may: return ename:VK_ERROR_INITIALIZATION_FAILED.
|
|
|
|
Other than these non-deterministic results, behavior is well defined.
|
|
In particular:
|
|
|
|
* The implementation must: not crash or enter an internally inconsistent
|
|
state where future valid Vulkan commands might cause undefined results,
|
|
* Timeouts on future wait commands on fences sharing the payload must: be
|
|
effective.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
These rules allow processes to synchronize access to shared memory without
|
|
trusting each other.
|
|
However, such processes must still be cautious not to use the shared fence
|
|
for more than synchronizing access to the shared memory.
|
|
For example, a process should not use a fence with shared payload to tell
|
|
when commands it submitted to a queue have completed and objects used by
|
|
those commands may be destroyed, since the other process can accidentally or
|
|
maliciously cause the fence to signal before the commands actually complete.
|
|
====
|
|
|
|
When a fence is using an imported payload, its
|
|
slink:VkExportFenceCreateInfoKHR::pname:handleTypes value is that specified
|
|
when creating the fence from which the payload was exported, rather than
|
|
that specified when creating the fence.
|
|
Additionally,
|
|
slink:VkExternalFencePropertiesKHR::exportFromImportedHandleTypes restricts
|
|
which handle types can: be exported from such a fence based on the specific
|
|
handle type used to import the current payload.
|
|
ifdef::VK_KHR_swapchain[]
|
|
Passing a fence to flink:vkAcquireNextImageKHR is equivalent to temporarily
|
|
importing a fence payload to that fence.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Because the exportable handle types of an imported fence correspond to its
|
|
current imported payload, and flink:vkAcquireNextImageKHR behaves the same
|
|
as a temporary import operation for which the source fence is opaque to the
|
|
application, applications have no way of determining whether any external
|
|
handle types can: be exported from a fence in this state.
|
|
Therefore, applications must: not attempt to export handles from fences
|
|
using a temporarily imported payload from flink:vkAcquireNextImageKHR.
|
|
====
|
|
endif::VK_KHR_swapchain[]
|
|
|
|
When importing a fence payload, it is the responsibility of the application
|
|
to ensure the external handles meet all valid usage requirements.
|
|
However, implementations must: perform sufficient validation of external
|
|
handles to ensure that the operation results in a valid fence which will not
|
|
cause program termination, device loss, queue stalls, host thread stalls, or
|
|
corruption of other resources when used as allowed according to its import
|
|
parameters.
|
|
If the external handle provided does not meet these requirements, the
|
|
implementation must: fail the fence payload import operation with the error
|
|
code ename:VK_ERROR_INVALID_EXTERNAL_HANDLE_KHR.
|
|
|
|
endif::VK_KHR_external_fence[]
|
|
|
|
ifdef::VK_KHR_external_fence_win32[]
|
|
|
|
[open,refpage='vkImportFenceWin32HandleKHR',desc='Import a fence from a Windows HANDLE',type='protos']
|
|
--
|
|
|
|
To import a fence payload from a Windows handle, call:
|
|
|
|
include::../api/protos/vkImportFenceWin32HandleKHR.txt[]
|
|
|
|
* pname:device is the logical device that created the fence.
|
|
* pname:pImportFenceWin32HandleInfo points to a
|
|
slink:VkImportFenceWin32HandleInfoKHR structure specifying the fence and
|
|
import parameters.
|
|
|
|
Importing a fence payload from Windows handles does not transfer ownership
|
|
of the handle to the Vulkan implementation.
|
|
For handle types defined as NT handles, the application must: release
|
|
ownership using the fname:CloseHandle system call when the handle is no
|
|
longer needed.
|
|
|
|
Applications can: import the same fence payload into multiple instances of
|
|
Vulkan, into the same instance from which it was exported, and multiple
|
|
times into a given Vulkan instance.
|
|
|
|
include::../validity/protos/vkImportFenceWin32HandleKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='VkImportFenceWin32HandleInfoKHR',desc='(None)',type='structs']
|
|
--
|
|
The sname:VkImportFenceWin32HandleInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkImportFenceWin32HandleInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:fence is the fence into which the state will be imported.
|
|
* pname:flags is a bitmask of elink:VkFenceImportFlagBitsKHR specifying
|
|
additional parameters for the fence payload import operation.
|
|
* pname:handleType specifies the type of pname:handle.
|
|
* pname:handle is the external handle to import, or `NULL`.
|
|
* pname:name is the NULL-terminated UTF-16 string naming the underlying
|
|
synchronization primitive to import, or `NULL`.
|
|
|
|
The handle types supported by pname:handleType are:
|
|
|
|
[[synchronization-fence-handletypes-win32]]
|
|
.Handle Types Supported by VkImportFenceWin32HandleInfoKHR
|
|
[width="80%",options="header"]
|
|
|====
|
|
| Handle Type | Transference | Permanence Supported
|
|
| ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR | Reference | Temporary,Permanent
|
|
| ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT_KHR | Reference | Temporary,Permanent
|
|
|====
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkImportFenceWin32HandleInfoKHR-handleType-01457]]
|
|
pname:handleType must: be a value included in the
|
|
<<synchronization-fence-handletypes-win32, Handle Types Supported by
|
|
VkImportFenceWin32HandleInfoKHR>> table.
|
|
* [[VUID-VkImportFenceWin32HandleInfoKHR-handleType-01459]]
|
|
If pname:handleType is not
|
|
ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR, pname:name
|
|
must: be `NULL`.
|
|
* [[VUID-VkImportFenceWin32HandleInfoKHR-handleType-01460]]
|
|
If pname:handleType is not `0` and pname:handle is `NULL`, pname:name
|
|
must: name a valid synchronization primitive of the type specified by
|
|
pname:handleType.
|
|
* [[VUID-VkImportFenceWin32HandleInfoKHR-handleType-01461]]
|
|
If pname:handleType is not `0` and pname:name is `NULL`, pname:handle
|
|
must: be a valid handle of the type specified by pname:handleType.
|
|
* [[VUID-VkImportFenceWin32HandleInfoKHR-handle-01462]]
|
|
If pname:handle is not `NULL`, pname:name must be `NULL`.
|
|
* [[VUID-VkImportFenceWin32HandleInfoKHR-handle-01539]]
|
|
If pname:handle is not `NULL`, it must: obey any requirements listed for
|
|
pname:handleType in <<external-fence-handle-types-compatibility,external
|
|
fence handle types compatibility>>.
|
|
* [[VUID-VkImportFenceWin32HandleInfoKHR-name-01540]]
|
|
If pname:name is not `NULL`, it must: obey any requirements listed for
|
|
pname:handleType in <<external-fence-handle-types-compatibility,external
|
|
fence handle types compatibility>>.
|
|
****
|
|
|
|
include::../validity/structs/VkImportFenceWin32HandleInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_fence_win32[]
|
|
|
|
ifdef::VK_KHR_external_fence_fd[]
|
|
|
|
[open,refpage='vkImportFenceFdKHR',desc='Import a fence from a POSIX file descriptor',type='protos']
|
|
--
|
|
|
|
To import a fence payload from a POSIX file descriptor, call:
|
|
|
|
include::../api/protos/vkImportFenceFdKHR.txt[]
|
|
|
|
* pname:device is the logical device that created the fence.
|
|
* pname:pImportFenceFdInfo points to a slink:VkImportFenceFdInfoKHR
|
|
structure specifying the fence and import parameters.
|
|
|
|
Importing a fence payload from a file descriptor transfers ownership of the
|
|
file descriptor from the application to the Vulkan implementation.
|
|
The application must: not perform any operations on the file descriptor
|
|
after a successful import.
|
|
|
|
Applications can: import the same fence payload into multiple instances of
|
|
Vulkan, into the same instance from which it was exported, and multiple
|
|
times into a given Vulkan instance.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkImportFenceFdKHR-fence-01463]]
|
|
pname:fence must: not be associated with any queue command that has not
|
|
yet completed execution on that queue
|
|
****
|
|
|
|
include::../validity/protos/vkImportFenceFdKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='VkImportFenceFdInfoKHR',desc='(None)',type='structs']
|
|
--
|
|
The sname:VkImportFenceFdInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkImportFenceFdInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:fence is the fence into which the payload will be imported.
|
|
* pname:flags is a bitmask of elink:VkFenceImportFlagBitsKHR specifying
|
|
additional parameters for the fence payload import operation.
|
|
* pname:handleType specifies the type of pname:fd.
|
|
* pname:fd is the external handle to import.
|
|
|
|
The handle types supported by pname:handleType are:
|
|
|
|
[[synchronization-fence-handletypes-fd]]
|
|
.Handle Types Supported by VkImportFenceFdInfoKHR
|
|
[width="80%",options="header"]
|
|
|====
|
|
| Handle Type | Transference | Permanence Supported
|
|
| ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_FD_BIT_KHR | Reference | Temporary,Permanent
|
|
| ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_SYNC_FD_BIT_KHR | Copy | Temporary
|
|
|====
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkImportFenceFdInfoKHR-handleType-01464]]
|
|
pname:handleType must: be a value included in the
|
|
<<synchronization-fence-handletypes-fd, Handle Types Supported by
|
|
VkImportFenceFdInfoKHR>> table.
|
|
* [[VUID-VkImportFenceFdInfoKHR-fd-01541]]
|
|
pname:fd must: obey any requirements listed for pname:handleType in
|
|
<<external-fence-handle-types-compatibility,external fence handle types
|
|
compatibility>>.
|
|
****
|
|
|
|
If pname:handleType is ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_SYNC_FD_BIT_KHR,
|
|
the special value `-1` for pname:fd is treated like a valid sync file
|
|
descriptor referring to an object that has already signaled.
|
|
The import operation will succeed and the sname:VkFence will have a
|
|
temporarily imported payload as if a valid file descriptor had been
|
|
provided.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
This special behavior for importing an invalid sync file descriptor allows
|
|
easier interoperability with other system software which uses the convention
|
|
that an invalid sync file descriptor represents work that has already
|
|
completed and doesn't need to be waited for.
|
|
It is consistent with the option for implementations to return a `-1` file
|
|
descriptor when exporting a
|
|
ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_SYNC_FD_BIT_KHR from a sname:VkFence
|
|
which is signaled.
|
|
====
|
|
|
|
include::../validity/structs/VkImportFenceFdInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_fence_fd[]
|
|
|
|
ifdef::VK_KHR_external_fence[]
|
|
ifdef::VK_KHR_external_fence_win32,VK_KHR_external_fence_fd[]
|
|
|
|
[open,refpage='VkFenceImportFlagBitsKHR',desc='Bitmask specifying additional parameters of fence payload import',type='enums']
|
|
--
|
|
|
|
Bits which can: be set in
|
|
ifdef::VK_KHR_external_fence_win32[]
|
|
slink:VkImportFenceWin32HandleInfoKHR::pname:flags
|
|
endif::VK_KHR_external_fence_win32[]
|
|
ifdef::VK_KHR_external_fence_win32+VK_KHR_external_fence_fd[and]
|
|
ifdef::VK_KHR_external_fence_fd[]
|
|
slink:VkImportFenceFdInfoKHR::pname:flags
|
|
endif::VK_KHR_external_fence_fd[]
|
|
specifying additional parameters of a fence import operation are:
|
|
|
|
include::../api/enums/VkFenceImportFlagBitsKHR.txt[]
|
|
|
|
* ename:VK_FENCE_IMPORT_TEMPORARY_BIT_KHR specifies that the fence payload
|
|
will be imported only temporarily, as described in
|
|
<<synchronization-fences-importing,Importing Fence Payloads>>,
|
|
regardless of the permanence of pname:handleType.
|
|
|
|
--
|
|
|
|
endif::VK_KHR_external_fence_win32,VK_KHR_external_fence_fd[]
|
|
endif::VK_KHR_external_fence[]
|
|
|
|
|
|
[[synchronization-semaphores]]
|
|
== Semaphores
|
|
|
|
[open,refpage='VkSemaphore',desc='Opaque handle to a semaphore object',type='handles']
|
|
--
|
|
|
|
Semaphores are a synchronization primitive that can: be used to insert a
|
|
dependency between batches submitted to queues.
|
|
Semaphores have two states - signaled and unsignaled.
|
|
The state of a semaphore can: be signaled after execution of a batch of
|
|
commands is completed.
|
|
A batch can: wait for a semaphore to become signaled before it begins
|
|
execution, and the semaphore is also unsignaled before the batch begins
|
|
execution.
|
|
|
|
ifdef::VK_KHR_external_semaphore[]
|
|
[[synchronization-semaphores-payloads]]
|
|
As with most objects in Vulkan, semaphores are an interface to internal data
|
|
which is typically opaque to applications.
|
|
This internal data is referred to as a semaphore's _payload_.
|
|
|
|
However, in order to enable communication with agents outside of the current
|
|
device, it is necessary to be able to export that payload to a commonly
|
|
understood format, and subsequently import from that format as well.
|
|
|
|
The internal data of a semaphore may: include a reference to any resources
|
|
and pending work associated with signal or unsignal operations performed on
|
|
that semaphore object.
|
|
Mechanisms to import and export that internal data to and from semaphores
|
|
are provided <<VkExportSemaphoreCreateInfoKHR, below>>.
|
|
These mechanisms indirectly enable applications to share semaphore state
|
|
between two or more semaphores and other synchronization primitives across
|
|
process and API boundaries.
|
|
|
|
endif::VK_KHR_external_semaphore[]
|
|
|
|
Semaphores are represented by sname:VkSemaphore handles:
|
|
|
|
include::../api/handles/VkSemaphore.txt[]
|
|
|
|
--
|
|
|
|
[open,refpage='vkCreateSemaphore',desc='Create a new queue semaphore object',type='protos']
|
|
--
|
|
|
|
To create a semaphore, call:
|
|
|
|
include::../api/protos/vkCreateSemaphore.txt[]
|
|
|
|
* pname:device is the logical device that creates the semaphore.
|
|
* pname:pCreateInfo is a pointer to an instance of the
|
|
sname:VkSemaphoreCreateInfo structure which contains information about
|
|
how the semaphore is to be created.
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
* pname:pSemaphore points to a handle in which the resulting semaphore
|
|
object is returned.
|
|
|
|
When created, the semaphore is in the unsignaled state.
|
|
|
|
include::../validity/protos/vkCreateSemaphore.txt[]
|
|
--
|
|
|
|
[open,refpage='VkSemaphoreCreateInfo',desc='Structure specifying parameters of a newly created semaphore',type='structs']
|
|
--
|
|
|
|
The sname:VkSemaphoreCreateInfo structure is defined as:
|
|
|
|
include::../api/structs/VkSemaphoreCreateInfo.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:flags is reserved for future use.
|
|
|
|
include::../validity/structs/VkSemaphoreCreateInfo.txt[]
|
|
--
|
|
|
|
ifdef::VK_KHR_external_semaphore[]
|
|
|
|
[open,refpage='VkExportSemaphoreCreateInfoKHR',desc='Structure specifying handle types that can be exported from a semaphore',type='structs']
|
|
--
|
|
|
|
To create a semaphore whose payload can: be exported to external handles,
|
|
add the slink:VkExportSemaphoreCreateInfoKHR structure to the pname:pNext
|
|
chain of the slink:VkSemaphoreCreateInfo structure.
|
|
The sname:VkExportSemaphoreCreateInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkExportSemaphoreCreateInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:handleTypes is a bitmask of
|
|
elink:VkExternalSemaphoreHandleTypeFlagBitsKHR specifying one or more
|
|
semaphore handle types the application can: export from the resulting
|
|
semaphore.
|
|
The application can: request multiple handle types for the same
|
|
semaphore.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkExportSemaphoreCreateInfoKHR-handleTypes-01124]]
|
|
The bits in pname:handleTypes must: be supported and compatible, as
|
|
reported by slink:VkExternalSemaphorePropertiesKHR.
|
|
****
|
|
|
|
include::../validity/structs/VkExportSemaphoreCreateInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_semaphore[]
|
|
|
|
ifdef::VK_KHR_external_semaphore_win32[]
|
|
|
|
[open,refpage='VkExportSemaphoreWin32HandleInfoKHR',desc='Structure specifying additional attributes of Windows handles exported from a semaphore',type='structs']
|
|
--
|
|
|
|
To specify additional attributes of NT handles exported from a semaphore,
|
|
add the slink:VkExportSemaphoreWin32HandleInfoKHR structure to the
|
|
pname:pNext chain of the slink:VkSemaphoreCreateInfo structure.
|
|
The sname:VkExportSemaphoreWin32HandleInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkExportSemaphoreWin32HandleInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:pAttributes is a pointer to a Windows code:SECURITY_ATTRIBUTES
|
|
structure specifying security attributes of the handle.
|
|
* pname:dwAccess is a code:DWORD specifying access rights of the handle.
|
|
* pname:name is a NULL-terminated UTF-16 string to associate with the
|
|
underlying synchronization primitive referenced by NT handles exported
|
|
from the created semaphore.
|
|
|
|
If this structure is not present, or if pname:pAttributes is set to `NULL`,
|
|
default security descriptor values will be used, and child processes created
|
|
by the application will not inherit the handle, as described in the MSDN
|
|
documentation for "`Synchronization Object Security and Access Rights`"^1^.
|
|
Further, if the structure is not present, the access rights will be
|
|
|
|
code:DXGI_SHARED_RESOURCE_READ | code:DXGI_SHARED_RESOURCE_WRITE
|
|
|
|
for handles of the following types:
|
|
|
|
ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR
|
|
|
|
And
|
|
|
|
code:GENERIC_ALL
|
|
|
|
for handles of the following types:
|
|
|
|
ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_D3D12_FENCE_BIT_KHR
|
|
|
|
1::
|
|
https://msdn.microsoft.com/en-us/library/windows/desktop/ms686670.aspx
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkExportSemaphoreWin32HandleInfoKHR-handleTypes-01125]]
|
|
If slink:VkExportSemaphoreCreateInfoKHR::pname:handleTypes does not
|
|
include ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR or
|
|
ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_D3D12_FENCE_BIT_KHR,
|
|
VkExportSemaphoreWin32HandleInfoKHR must: not be in the pname:pNext
|
|
chain of slink:VkSemaphoreCreateInfo.
|
|
****
|
|
|
|
include::../validity/structs/VkExportSemaphoreWin32HandleInfoKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='vkGetSemaphoreWin32HandleKHR',desc='Get a Windows HANDLE for a semaphore',type='protos']
|
|
--
|
|
|
|
To export a Windows handle representing the payload of a semaphore, call:
|
|
|
|
include::../api/protos/vkGetSemaphoreWin32HandleKHR.txt[]
|
|
|
|
* pname:device is the logical device that created the semaphore being
|
|
exported.
|
|
* pname:pGetWin32HandleInfo is a pointer to an instance of the
|
|
slink:VkSemaphoreGetWin32HandleInfoKHR structure containing parameters
|
|
of the export operation.
|
|
* pname:pHandle will return the Windows handle representing the semaphore
|
|
state.
|
|
|
|
For handle types defined as NT handles, the handles returned by
|
|
fname:vkGetSemaphoreWin32HandleKHR are owned by the application.
|
|
To avoid leaking resources, the application must: release ownership of them
|
|
using the fname:CloseHandle system call when they are no longer needed.
|
|
|
|
Exporting a Windows handle from a semaphore may: have side effects depending
|
|
on the transference of the specified handle type, as described in
|
|
<<synchronization-semaphores-importing,Importing Semaphore Payloads>>.
|
|
|
|
include::../validity/protos/vkGetSemaphoreWin32HandleKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='VkSemaphoreGetWin32HandleInfoKHR',desc='Structure describing a Win32 handle semaphore export operation',type='structs']
|
|
--
|
|
|
|
The sname:VkSemaphoreGetWin32HandleInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkSemaphoreGetWin32HandleInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:semaphore is the semaphore from which state will be exported.
|
|
* pname:handleType is the type of handle requested.
|
|
|
|
The properties of the handle returned depend on the value of
|
|
pname:handleType.
|
|
See elink:VkExternalSemaphoreHandleTypeFlagBitsKHR for a description of the
|
|
properties of the defined external semaphore handle types.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkGetSemaphoreWin32HandleKHR-handleType-01126]]
|
|
pname:handleType must: have been included in
|
|
slink:VkExportSemaphoreCreateInfoKHR::pname:handleTypes when the
|
|
pname:semaphore's current payload was created.
|
|
* [[VUID-vkGetSemaphoreWin32HandleKHR-handleType-01127]]
|
|
If pname:handleType is defined as an NT handle,
|
|
flink:vkGetSemaphoreWin32HandleKHR must: be called no more than once for
|
|
each valid unique combination of pname:semaphore and pname:handleType.
|
|
* [[VUID-vkGetSemaphoreWin32HandleKHR-semaphore-01128]]
|
|
pname:semaphore must: not currently have its payload replaced by an
|
|
imported payload as described below in
|
|
<<synchronization-semaphores-importing,Importing Semaphore Payloads>>
|
|
unless that imported payload's handle type was included in
|
|
slink:VkExternalSemaphorePropertiesKHR::pname:exportFromImportedHandleTypes
|
|
for pname:handleType.
|
|
* [[VUID-vkGetSemaphoreWin32HandleKHR-handleType-01129]]
|
|
If pname:handleType refers to a handle type with copy payload
|
|
transference semantics, as defined below in
|
|
<<synchronization-semaphores-importing,Importing Semaphore Payloads>>,
|
|
there must: be no queue waiting on pname:semaphore.
|
|
* [[VUID-vkGetSemaphoreWin32HandleKHR-handleType-01130]]
|
|
If pname:handleType refers to a handle type with copy payload
|
|
transference semantics, pname:semaphore must: be signaled, or have an
|
|
associated <<synchronization-semaphores-signaling,semaphore signal
|
|
operation>> pending execution.
|
|
* [[VUID-vkGetSemaphoreWin32HandleKHR-handleType-01131]]
|
|
pname:handleType must: be defined as an NT handle or a global share
|
|
handle.
|
|
****
|
|
|
|
include::../validity/structs/VkSemaphoreGetWin32HandleInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_semaphore_win32[]
|
|
|
|
ifdef::VK_KHR_external_semaphore_fd[]
|
|
|
|
[open,refpage='vkGetSemaphoreFdKHR',desc='Get a POSIX file descriptor handle for a semaphore',type='protos']
|
|
--
|
|
|
|
To export a POSIX file descriptor representing the payload of a semaphore,
|
|
call:
|
|
|
|
include::../api/protos/vkGetSemaphoreFdKHR.txt[]
|
|
|
|
* pname:device is the logical device that created the semaphore being
|
|
exported.
|
|
* pname:pGetFdInfo is a pointer to an instance of the
|
|
slink:VkSemaphoreGetFdInfoKHR structure containing parameters of the
|
|
export operation.
|
|
* pname:pFd will return the file descriptor representing the semaphore
|
|
payload.
|
|
|
|
Each call to fname:vkGetSemaphoreFdKHR must: create a new file descriptor
|
|
and transfer ownership of it to the application.
|
|
To avoid leaking resources, the application must: release ownership of the
|
|
file descriptor when it is no longer needed.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Ownership can be released in many ways.
|
|
For example, the application can call fname:close() on the file descriptor,
|
|
or transfer ownership back to Vulkan by using the file descriptor to import
|
|
a semaphore payload.
|
|
====
|
|
|
|
Where supported by the operating system, the implementation must: set the
|
|
file descriptor to be closed automatically when an fname:execve system call
|
|
is made.
|
|
|
|
Exporting a file descriptor from a semaphore may: have side effects
|
|
depending on the transference of the specified handle type, as described in
|
|
<<synchronization-semaphores-importing,Importing Semaphore State>>.
|
|
|
|
include::../validity/protos/vkGetSemaphoreFdKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='VkSemaphoreGetFdInfoKHR',desc='Structure describing a POSIX FD semaphore export operation',type='structs']
|
|
--
|
|
|
|
The sname:VkSemaphoreGetFdInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkSemaphoreGetFdInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:semaphore is the semaphore from which state will be exported.
|
|
* pname:handleType is the type of handle requested.
|
|
|
|
The properties of the file descriptor returned depend on the value of
|
|
pname:handleType.
|
|
See elink:VkExternalSemaphoreHandleTypeFlagBitsKHR for a description of the
|
|
properties of the defined external semaphore handle types.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkGetSemaphoreFdKHR-handleType-01132]]
|
|
pname:handleType must: have been included in
|
|
slink:VkExportSemaphoreCreateInfoKHR::pname:handleTypes when
|
|
pname:semaphore's current payload was created.
|
|
* [[VUID-vkGetSemaphoreFdKHR-semaphore-01133]]
|
|
pname:semaphore must: not currently have its payload replaced by an
|
|
imported payload as described below in
|
|
<<synchronization-semaphores-importing,Importing Semaphore Payloads>>
|
|
unless that imported payload's handle type was included in
|
|
slink:VkExternalSemaphorePropertiesKHR::pname:exportFromImportedHandleTypes
|
|
for pname:handleType.
|
|
* [[VUID-vkGetSemaphoreFdKHR-handleType-01134]]
|
|
If pname:handleType refers to a handle type with copy payload
|
|
transference semantics, as defined below in
|
|
<<synchronization-semaphores-importing,Importing Semaphore Payloads>>,
|
|
there must: be no queue waiting on pname:semaphore.
|
|
* [[VUID-vkGetSemaphoreFdKHR-handleType-01135]]
|
|
If pname:handleType refers to a handle type with copy payload
|
|
transference semantics, pname:semaphore must: be signaled, or have an
|
|
associated <<synchronization-semaphores-signaling,semaphore signal
|
|
operation>> pending execution.
|
|
* [[VUID-vkGetSemaphoreFdKHR-handleType-01136]]
|
|
pname:handleType must: be defined as a POSIX file descriptor handle.
|
|
****
|
|
|
|
include::../validity/structs/VkSemaphoreGetFdInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_semaphore_fd[]
|
|
|
|
[open,refpage='vkDestroySemaphore',desc='Destroy a semaphore object',type='protos']
|
|
--
|
|
|
|
To destroy a semaphore, call:
|
|
|
|
include::../api/protos/vkDestroySemaphore.txt[]
|
|
|
|
* pname:device is the logical device that destroys the semaphore.
|
|
* pname:semaphore is the handle of the semaphore to destroy.
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkDestroySemaphore-semaphore-01137]]
|
|
All submitted batches that refer to pname:semaphore must: have completed
|
|
execution
|
|
* [[VUID-vkDestroySemaphore-semaphore-01138]]
|
|
If sname:VkAllocationCallbacks were provided when pname:semaphore was
|
|
created, a compatible set of callbacks must: be provided here
|
|
* [[VUID-vkDestroySemaphore-semaphore-01139]]
|
|
If no sname:VkAllocationCallbacks were provided when pname:semaphore was
|
|
created, pname:pAllocator must: be `NULL`
|
|
****
|
|
|
|
include::../validity/protos/vkDestroySemaphore.txt[]
|
|
--
|
|
|
|
|
|
[[synchronization-semaphores-signaling]]
|
|
=== Semaphore Signaling
|
|
|
|
When a batch is submitted to a queue via a <<devsandqueues-submission, queue
|
|
submission>>, and it includes semaphores to be signaled, it defines a memory
|
|
dependency on the batch, and defines _semaphore signal operations_ which set
|
|
the semaphores to the signaled state.
|
|
|
|
The first <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes every command submitted in the same batch.
|
|
Semaphore signal operations that are defined by flink:vkQueueSubmit
|
|
additionally include all batches previously submitted to the same queue via
|
|
flink:vkQueueSubmit, including batches that are submitted in the same
|
|
<<devsandqueues-submission, queue submission>> command, but at a lower index
|
|
within the array of batches.
|
|
|
|
The second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes only the semaphore signal operation.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>>
|
|
includes all memory access performed by the device.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>> is
|
|
empty.
|
|
|
|
|
|
[[synchronization-semaphores-waiting]]
|
|
=== Semaphore Waiting & Unsignaling
|
|
|
|
When a batch is submitted to a queue via a <<devsandqueues-submission, queue
|
|
submission>>, and it includes semaphores to be waited on, it defines a
|
|
memory dependency between prior semaphore signal operations and the batch,
|
|
and defines _semaphore unsignal operations_ which set the semaphores to the
|
|
unsignaled state.
|
|
|
|
The first synchronization scope includes all semaphore signal operations
|
|
that operate on semaphores waited on in the same batch, and that
|
|
happen-before the wait completes.
|
|
|
|
The second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes every command submitted in the same batch.
|
|
In the case of flink:vkQueueSubmit, the second synchronization scope is
|
|
limited to operations on the pipeline stages determined by the
|
|
<<synchronization-pipeline-stages-masks, destination stage mask>> specified
|
|
by the corresponding element of pname:pWaitDstStageMask.
|
|
Also, in the case of flink:vkQueueSubmit, the second synchronization scope
|
|
additionally includes all batches subsequently submitted to the same queue
|
|
via flink:vkQueueSubmit, including batches that are submitted in the same
|
|
<<devsandqueues-submission, queue submission>> command, but at a higher
|
|
index within the array of batches.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>> is
|
|
empty.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>>
|
|
includes all memory access performed by the device.
|
|
|
|
The semaphore unsignal operation happens-after the first set of operations
|
|
in the execution dependency, and happens-before the second set of operations
|
|
in the execution dependency.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Unlike fences or events, the act of waiting for a semaphore also unsignals
|
|
that semaphore.
|
|
If two operations are separately specified to wait for the same semaphore,
|
|
and there are no other execution dependencies between those operations,
|
|
behaviour is undefined.
|
|
An execution dependency must: be present that guarantees that the semaphore
|
|
unsignal operation for the first of those waits, happens-before the
|
|
semaphore is signalled again, and before the second unsignal operation.
|
|
Semaphore waits and signals should thus occur in discrete 1:1 pairs.
|
|
====
|
|
|
|
ifdef::VK_KHR_swapchain[]
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
A common scenario for using pname:pWaitDstStageMask with values other than
|
|
ename:VK_PIPELINE_STAGE_ALL_COMMANDS_BIT is when synchronizing a window
|
|
system presentation operation against subsequent command buffers which
|
|
render the next frame.
|
|
In this case, a presentation image must: not be overwritten until the
|
|
presentation operation completes, but other pipeline stages can: execute
|
|
without waiting.
|
|
A mask of ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT prevents
|
|
subsequent color attachment writes from executing until the semaphore
|
|
signals.
|
|
Some implementations may: be able to execute transfer operations and/or
|
|
vertex processing work before the semaphore is signaled.
|
|
|
|
If an image layout transition needs to be performed on a presentable image
|
|
before it is used in a framebuffer, that can: be performed as the first
|
|
operation submitted to the queue after acquiring the image, and should: not
|
|
prevent other work from overlapping with the presentation operation.
|
|
For example, a sname:VkImageMemoryBarrier could use:
|
|
|
|
* pname:srcStageMask = ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
|
|
* pname:srcAccessMask = 0
|
|
* pname:dstStageMask = ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
|
|
* pname:dstAccessMask = ename:VK_ACCESS_COLOR_ATTACHMENT_READ_BIT |
|
|
ename:VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT.
|
|
* pname:oldLayout = ename:VK_IMAGE_LAYOUT_PRESENT_SRC_KHR
|
|
* pname:newLayout = ename:VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL
|
|
|
|
Alternatively, pname:oldLayout can: be ename:VK_IMAGE_LAYOUT_UNDEFINED, if
|
|
the image's contents need not be preserved.
|
|
|
|
This barrier accomplishes a dependency chain between previous presentation
|
|
operations and subsequent color attachment output operations, with the
|
|
layout transition performed in between, and does not introduce a dependency
|
|
between previous work and any vertex processing stages.
|
|
More precisely, the semaphore signals after the presentation operation
|
|
completes, the semaphore wait stalls the
|
|
ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT stage, and there is a
|
|
dependency from that same stage to itself with the layout transition
|
|
performed in between.
|
|
====
|
|
endif::VK_KHR_swapchain[]
|
|
|
|
|
|
[[synchronization-semaphores-waiting-state]]
|
|
=== Semaphore State Requirements For Wait Operations
|
|
|
|
Before waiting on a semaphore, the application must: ensure the semaphore is
|
|
in a valid state for a wait operation.
|
|
Specifically, when a <<synchronization-semaphores-waiting,semaphore wait and
|
|
unsignal operation>> is submitted to a queue:
|
|
|
|
* The semaphore must: be signaled, or have an associated
|
|
<<synchronization-semaphores-signaling,semaphore signal operation>> that
|
|
is pending execution.
|
|
* There must: be no other queue waiting on the same semaphore when the
|
|
operation executes.
|
|
|
|
ifdef::VK_KHR_external_semaphore[]
|
|
|
|
[[synchronization-semaphores-importing]]
|
|
=== Importing Semaphore Payloads
|
|
|
|
Applications can: import a semaphore payload into an existing semaphore
|
|
using an external semaphore handle.
|
|
The effects of the import operation will be either temporary or permanent,
|
|
as specified by the application.
|
|
If the import is temporary, the implementation must: restore the semaphore
|
|
to its prior permanent state after submitting the next semaphore wait
|
|
operation.
|
|
Performing a subsequent temporary import on a semaphore before performing a
|
|
semaphore wait has no effect on this requirement; the next wait submitted on
|
|
the semaphore must: still restore its last permanent state.
|
|
A permanent payload import behaves as if the target semaphore was destroyed,
|
|
and a new semaphore was created with the same handle but the imported
|
|
payload.
|
|
Because importing a semaphore payload temporarily or permanently detaches
|
|
the existing payload from a semaphore, similar usage restrictions to those
|
|
applied to fname:vkDestroySemaphore are applied to any command that imports
|
|
a semaphore payload.
|
|
Which of these import types is used is referred to as the import operation's
|
|
_permanence_.
|
|
Each handle type supports either one or both types of permanence.
|
|
|
|
The implementation must: perform the import operation by either referencing
|
|
or copying the payload referred to by the specified external semaphore
|
|
handle, depending on the handle's type.
|
|
The import method used is referred to as the handle type's _transference_.
|
|
When using handle types with reference transference, importing a payload to
|
|
a semaphore adds the semaphore to the set of all semaphores sharing that
|
|
payload.
|
|
This set includes the semaphore from which the payload was exported.
|
|
Semaphore signaling and waiting operations performed on any semaphore in the
|
|
set must: behave as if the set were a single semaphore.
|
|
Importing a payload using handle types with copy transference creates a
|
|
duplicate copy of the payload at the time of import, but makes no further
|
|
reference to it.
|
|
Semaphore signaling and waiting operations performed on the target of copy
|
|
imports must: not affect any other semaphore or payload.
|
|
|
|
Export operations have the same transference as the specified handle type's
|
|
import operations.
|
|
Additionally, exporting a semaphore payload to a handle with copy
|
|
transference has the same side effects on the source semaphore's payload as
|
|
executing a semaphore wait operation.
|
|
If the semaphore was using a temporarily imported payload, the semaphore's
|
|
prior permanent payload will be restored.
|
|
|
|
ifdef::VK_KHR_external_semaphore_win32,VK_KHR_external_semaphore_fd[]
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
The
|
|
ifdef::VK_KHR_external_semaphore_win32+VK_KHR_external_semaphore_fd[tables]
|
|
ifndef::VK_KHR_external_semaphore_win32+VK_KHR_external_semaphore_fd[table]
|
|
ifdef::VK_KHR_external_semaphore_win32[]
|
|
<<synchronization-semaphore-handletypes-win32,Handle Types Supported by
|
|
VkImportSemaphoreWin32HandleInfoKHR>>
|
|
endif::VK_KHR_external_semaphore_win32[]
|
|
ifdef::VK_KHR_external_semaphore_win32+VK_KHR_external_semaphore_fd[and]
|
|
ifdef::VK_KHR_external_semaphore_fd[]
|
|
<<synchronization-semaphore-handletypes-fd,Handle Types Supported by
|
|
VkImportSemaphoreFdInfoKHR>>
|
|
endif::VK_KHR_external_semaphore_fd[]
|
|
ifdef::VK_KHR_external_semaphore_win32+VK_KHR_external_semaphore_fd[define]
|
|
ifndef::VK_KHR_external_semaphore_win32+VK_KHR_external_semaphore_fd[defines]
|
|
the permanence and transference of each handle type.
|
|
====
|
|
endif::VK_KHR_external_semaphore_win32,VK_KHR_external_semaphore_fd[]
|
|
|
|
<<fundamentals-threadingbehavior,External synchronization>> allows
|
|
implementations to modify an object's internal state, i.e. payload, without
|
|
internal synchronization.
|
|
However, for semaphores sharing a payload across processes, satisfying the
|
|
external synchronization requirements of fname:VkSemaphore parameters as if
|
|
all semaphores in the set were the same object is sometimes infeasible.
|
|
Satisfying the <<synchronization-semaphores-waiting-state,wait operation
|
|
state requirements>> would similarly require impractical coordination or
|
|
levels of trust between processes.
|
|
Therefore, these constraints only apply to a specific semaphore handle, not
|
|
to its payload.
|
|
For distinct semaphore objects which share a payload, if the semaphores are
|
|
passed to separate queue submission commands concurrently, behavior will be
|
|
as if the commands were called in an arbitrary sequential order.
|
|
If the <<synchronization-semaphores-waiting-state,wait operation state
|
|
requirements>> are violated for the shared payload by a queue submission
|
|
command, or if a signal operation is queued for a shared payload that is
|
|
already signaled or has a pending signal operation, effects must: be limited
|
|
to one or more of the following:
|
|
|
|
* Returning ename:VK_ERROR_INITIALIZATION_FAILED from the command which
|
|
resulted in the violation.
|
|
* Losing the logical device on which the violation occured immediately or
|
|
at a future time, resulting in a ename:VK_ERROR_DEVICE_LOST error from
|
|
subsequent commands, including the one causing the violation.
|
|
* Continuing execution of the violating command or operation as if the
|
|
semaphore wait completed successfully after an implementation-dependent
|
|
timeout.
|
|
In this case, the state of the payload becomes undefined, and future
|
|
operations on semaphores sharing the payload will be subject to these
|
|
same rules.
|
|
The semaphore must: be destroyed or have its payload replaced by an
|
|
import operation to again have a well-defined state.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
These rules allow processes to synchronize access to shared memory without
|
|
trusting each other.
|
|
However, such processes must still be cautious not to use the shared
|
|
semaphore for more than synchronizing access to the shared memory.
|
|
For example, a process should not use a shared semaphore as part of an
|
|
execution dependency chain that, when complete, leads to objects being
|
|
destroyed, if it does not trust other processes sharing the semaphore
|
|
payload.
|
|
====
|
|
|
|
When a semaphore is using an imported payload, its
|
|
slink:VkExportSemaphoreCreateInfoKHR::pname:handleTypes value is that
|
|
specified when creating the semaphore from which the payload was exported,
|
|
rather than that specified when creating the semaphore.
|
|
Additionally,
|
|
slink:VkExternalSemaphorePropertiesKHR::exportFromImportedHandleTypes
|
|
restricts which handle types can: be exported from such a semaphore based on
|
|
the specific handle type used to import the current payload.
|
|
ifdef::VK_KHR_swapchain[]
|
|
Passing a semaphore to flink:vkAcquireNextImageKHR is equivalent to
|
|
temporarily importing a semaphore payload to that semaphore.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Because the exportable handle types of an imported semaphore correspond to
|
|
its current imported payload, and flink:vkAcquireNextImageKHR behaves the
|
|
same as a temporary import operation for which the source semaphore is
|
|
opaque to the application, applications have no way of determining whether
|
|
any external handle types can: be exported from a semaphore in this state.
|
|
Therefore, applications must: not attempt to export external handles from
|
|
semaphores using a temporarily imported payload from
|
|
flink:vkAcquireNextImageKHR.
|
|
====
|
|
endif::VK_KHR_swapchain[]
|
|
|
|
When importing a semaphore payload, it is the responsibility of the
|
|
application to ensure the external handles meet all valid usage
|
|
requirements.
|
|
However, implementations must: perform sufficient validation of external
|
|
handles to ensure that the operation results in a valid semaphore which will
|
|
not cause program termination, device loss, queue stalls, or corruption of
|
|
other resources when used as allowed according to its import parameters, and
|
|
excepting those side effects allowed for violations of the
|
|
<<synchronization-semaphores-waiting-state,valid semaphore state for wait
|
|
operations>> rules.
|
|
If the external handle provided does not meet these requirements, the
|
|
implementation must: fail the semaphore payload import operation with the
|
|
error code ename:VK_ERROR_INVALID_EXTERNAL_HANDLE_KHR.
|
|
|
|
endif::VK_KHR_external_semaphore[]
|
|
|
|
ifdef::VK_KHR_external_semaphore_win32[]
|
|
|
|
[open,refpage='vkImportSemaphoreWin32HandleKHR',desc='Import a semaphore from a Windows HANDLE',type='protos']
|
|
--
|
|
|
|
To import a semaphore payload from a Windows handle, call:
|
|
|
|
include::../api/protos/vkImportSemaphoreWin32HandleKHR.txt[]
|
|
|
|
* pname:device is the logical device that created the semaphore.
|
|
* pname:pImportSemaphoreWin32HandleInfo points to a
|
|
slink:VkImportSemaphoreWin32HandleInfoKHR structure specifying the
|
|
semaphore and import parameters.
|
|
|
|
Importing a semaphore payload from Windows handles does not transfer
|
|
ownership of the handle to the Vulkan implementation.
|
|
For handle types defined as NT handles, the application must: release
|
|
ownership using the fname:CloseHandle system call when the handle is no
|
|
longer needed.
|
|
|
|
Applications can: import the same semaphore payload into multiple instances
|
|
of Vulkan, into the same instance from which it was exported, and multiple
|
|
times into a given Vulkan instance.
|
|
|
|
include::../validity/protos/vkImportSemaphoreWin32HandleKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='VkImportSemaphoreWin32HandleInfoKHR',desc='Structure specifying Windows handle to import to a semaphore',type='structs']
|
|
--
|
|
|
|
The sname:VkImportSemaphoreWin32HandleInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkImportSemaphoreWin32HandleInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:semaphore is the semaphore into which the payload will be
|
|
imported.
|
|
* pname:flags is a bitmask of elink:VkSemaphoreImportFlagBitsKHR
|
|
specifying additional parameters for the semaphore payload import
|
|
operation.
|
|
* pname:handleType specifies the type of pname:handle.
|
|
* pname:handle is the external handle to import, or `NULL`.
|
|
* pname:name is a NULL-terminated UTF-16 string naming the underlying
|
|
synchronization primitive to import, or `NULL`.
|
|
|
|
The handle types supported by pname:handleType are:
|
|
|
|
[[synchronization-semaphore-handletypes-win32]]
|
|
.Handle Types Supported by VkImportSemaphoreWin32HandleInfoKHR
|
|
[width="80%",options="header"]
|
|
|====
|
|
| Handle Type | Transference | Permanence Supported
|
|
| ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR | Reference | Temporary,Permanent
|
|
| ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT_KHR | Reference | Temporary,Permanent
|
|
| ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_D3D12_FENCE_BIT_KHR | Reference | Temporary,Permanent
|
|
|====
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkImportSemaphoreWin32HandleInfoKHR-handleType-01140]]
|
|
pname:handleType must: be a value included in the
|
|
<<synchronization-semaphore-handletypes-win32,Handle Types Supported by
|
|
VkImportSemaphoreWin32HandleInfoKHR>> table.
|
|
* [[VUID-VkImportSemaphoreWin32HandleInfoKHR-handleType-01466]]
|
|
If pname:handleType is not
|
|
ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR or
|
|
ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_D3D12_FENCE_BIT_KHR, pname:name
|
|
must: be `NULL`.
|
|
* [[VUID-VkImportSemaphoreWin32HandleInfoKHR-handleType-01467]]
|
|
If pname:handleType is not `0` and pname:handle is `NULL`, pname:name
|
|
must: name a valid synchronization primitive of the type specified by
|
|
pname:handleType.
|
|
* [[VUID-VkImportSemaphoreWin32HandleInfoKHR-handleType-01468]]
|
|
If pname:handleType is not `0` and pname:name is `NULL`, pname:handle
|
|
must: be a valid handle of the type specified by pname:handleType.
|
|
* [[VUID-VkImportSemaphoreWin32HandleInfoKHR-handle-01469]]
|
|
If pname:handle is not `NULL`, pname:name must be `NULL`.
|
|
* [[VUID-VkImportSemaphoreWin32HandleInfoKHR-handle-01542]]
|
|
If pname:handle is not `NULL`, it must: obey any requirements listed for
|
|
pname:handleType in
|
|
<<external-semaphore-handle-types-compatibility,external semaphore
|
|
handle types compatibility>>.
|
|
* [[VUID-VkImportSemaphoreWin32HandleInfoKHR-name-01543]]
|
|
If pname:name is not `NULL`, it must: obey any requirements listed for
|
|
pname:handleType in
|
|
<<external-semaphore-handle-types-compatibility,external semaphore
|
|
handle types compatibility>>.
|
|
****
|
|
|
|
include::../validity/structs/VkImportSemaphoreWin32HandleInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_semaphore_win32[]
|
|
|
|
ifdef::VK_KHR_external_semaphore_fd[]
|
|
|
|
[open,refpage='vkImportSemaphoreFdKHR',desc='Import a semaphore from a POSIX file descriptor',type='protos']
|
|
--
|
|
|
|
To import a semaphore payload from a POSIX file descriptor, call:
|
|
|
|
include::../api/protos/vkImportSemaphoreFdKHR.txt[]
|
|
|
|
* pname:device is the logical device that created the semaphore.
|
|
* pname:pImportSemaphoreFdInfo points to a
|
|
slink:VkImportSemaphoreFdInfoKHR structure specifying the semaphore and
|
|
import parameters.
|
|
|
|
Importing a semaphore payload from a file descriptor transfers ownership of
|
|
the file descriptor from the application to the Vulkan implementation.
|
|
The application must: not perform any operations on the file descriptor
|
|
after a successful import.
|
|
|
|
Applications can: import the same semaphore payload into multiple instances
|
|
of Vulkan, into the same instance from which it was exported, and multiple
|
|
times into a given Vulkan instance.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkImportSemaphoreFdKHR-semaphore-01142]]
|
|
pname:semaphore must: not be associated with any queue command that has
|
|
not yet completed execution on that queue
|
|
****
|
|
|
|
include::../validity/protos/vkImportSemaphoreFdKHR.txt[]
|
|
--
|
|
|
|
[open,refpage='VkImportSemaphoreFdInfoKHR',desc='Structure specifying POSIX file descriptor to import to a semaphore',type='structs']
|
|
--
|
|
|
|
The sname:VkImportSemaphoreFdInfoKHR structure is defined as:
|
|
|
|
include::../api/structs/VkImportSemaphoreFdInfoKHR.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:semaphore is the semaphore into which the payload will be
|
|
imported.
|
|
* pname:flags is a bitmask of elink:VkSemaphoreImportFlagBitsKHR
|
|
specifying additional parameters for the semaphore payload import
|
|
operation.
|
|
* pname:handleType specifies the type of pname:fd.
|
|
* pname:fd is the external handle to import.
|
|
|
|
The handle types supported by pname:handleType are:
|
|
|
|
[[synchronization-semaphore-handletypes-fd]]
|
|
.Handle Types Supported by VkImportSemaphoreFdInfoKHR
|
|
[width="80%",options="header"]
|
|
|====
|
|
| Handle Type | Transference | Permanence Supported
|
|
| ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_FD_BIT_KHR | Reference | Temporary,Permanent
|
|
| ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_SYNC_FD_BIT_KHR | Copy | Temporary
|
|
|====
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkImportSemaphoreFdInfoKHR-handleType-01143]]
|
|
pname:handleType must: be a value included in the
|
|
<<synchronization-semaphore-handletypes-fd,Handle Types Supported by
|
|
VkImportSemaphoreFdInfoKHR>> table.
|
|
* [[VUID-VkImportSemaphoreFdInfoKHR-fd-01544]]
|
|
pname:fd must: obey any requirements listed for pname:handleType in
|
|
<<external-semaphore-handle-types-compatibility,external semaphore
|
|
handle types compatibility>>.
|
|
****
|
|
|
|
include::../validity/structs/VkImportSemaphoreFdInfoKHR.txt[]
|
|
--
|
|
|
|
endif::VK_KHR_external_semaphore_fd[]
|
|
|
|
ifdef::VK_KHR_external_semaphore[]
|
|
ifdef::VK_KHR_external_semaphore_win32,VK_KHR_external_semaphore_fd[]
|
|
|
|
[open,refpage='VkSemaphoreImportFlagBitsKHR',desc='Bitmask specifying additional parameters of semaphore payload import',type='enums']
|
|
--
|
|
|
|
Additional parameters of a semaphore import operation are specified by
|
|
ifdef::VK_KHR_external_semaphore_win32[]
|
|
slink:VkImportSemaphoreWin32HandleInfoKHR::pname:flags
|
|
endif::VK_KHR_external_semaphore_win32[]
|
|
ifdef::VK_KHR_external_semaphore_win32+VK_KHR_external_semaphore_fd[or]
|
|
ifdef::VK_KHR_external_semaphore_fd[]
|
|
slink:VkImportSemaphoreFdInfoKHR::pname:flags
|
|
endif::VK_KHR_external_semaphore_fd[]
|
|
.
|
|
Bits which can be set include:
|
|
|
|
include::../api/enums/VkSemaphoreImportFlagBitsKHR.txt[]
|
|
|
|
These bits have the following meanings:
|
|
|
|
* ename:VK_SEMAPHORE_IMPORT_TEMPORARY_BIT_KHR indicates that the semaphore
|
|
payload will be imported only temporarily, as described in
|
|
<<synchronization-semaphores-importing,Importing Semaphore Payloads>>,
|
|
regardless of the permanence of pname:handleType.
|
|
|
|
--
|
|
|
|
endif::VK_KHR_external_semaphore_win32,VK_KHR_external_semaphore_fd[]
|
|
endif::VK_KHR_external_semaphore[]
|
|
|
|
|
|
[[synchronization-events]]
|
|
== Events
|
|
|
|
[open,refpage='VkEvent',desc='Opaque handle to a event object',type='handles']
|
|
--
|
|
|
|
Events are a synchronization primitive that can: be used to insert a
|
|
fine-grained dependency between commands submitted to the same queue, or
|
|
between the host and a queue.
|
|
Events must: not be used to insert a dependency between commands submitted
|
|
to different queues.
|
|
Events have two states - signaled and unsignaled.
|
|
An application can: signal an event, or unsignal it, on either the host or
|
|
the device.
|
|
A device can: wait for an event to become signaled before executing further
|
|
operations.
|
|
No command exists to wait for an event to become signaled on the host, but
|
|
the current state of an event can: be queried.
|
|
|
|
Events are represented by sname:VkEvent handles:
|
|
|
|
include::../api/handles/VkEvent.txt[]
|
|
|
|
--
|
|
|
|
[open,refpage='vkCreateEvent',desc='Create a new event object',type='protos']
|
|
--
|
|
|
|
To create an event, call:
|
|
|
|
include::../api/protos/vkCreateEvent.txt[]
|
|
|
|
* pname:device is the logical device that creates the event.
|
|
* pname:pCreateInfo is a pointer to an instance of the
|
|
sname:VkEventCreateInfo structure which contains information about how
|
|
the event is to be created.
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
* pname:pEvent points to a handle in which the resulting event object is
|
|
returned.
|
|
|
|
When created, the event object is in the unsignaled state.
|
|
|
|
include::../validity/protos/vkCreateEvent.txt[]
|
|
--
|
|
|
|
[open,refpage='VkEventCreateInfo',desc='Structure specifying parameters of a newly created event',type='structs']
|
|
--
|
|
|
|
The sname:VkEventCreateInfo structure is defined as:
|
|
|
|
include::../api/structs/VkEventCreateInfo.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:flags is reserved for future use.
|
|
|
|
include::../validity/structs/VkEventCreateInfo.txt[]
|
|
--
|
|
|
|
[open,refpage='vkDestroyEvent',desc='Destroy an event object',type='protos']
|
|
--
|
|
|
|
To destroy an event, call:
|
|
|
|
include::../api/protos/vkDestroyEvent.txt[]
|
|
|
|
* pname:device is the logical device that destroys the event.
|
|
* pname:event is the handle of the event to destroy.
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkDestroyEvent-event-01145]]
|
|
All submitted commands that refer to pname:event must: have completed
|
|
execution
|
|
* [[VUID-vkDestroyEvent-event-01146]]
|
|
If sname:VkAllocationCallbacks were provided when pname:event was
|
|
created, a compatible set of callbacks must: be provided here
|
|
* [[VUID-vkDestroyEvent-event-01147]]
|
|
If no sname:VkAllocationCallbacks were provided when pname:event was
|
|
created, pname:pAllocator must: be `NULL`
|
|
****
|
|
|
|
include::../validity/protos/vkDestroyEvent.txt[]
|
|
--
|
|
|
|
[open,refpage='vkGetEventStatus',desc='Retrieve the status of an event object',type='protos']
|
|
--
|
|
|
|
To query the state of an event from the host, call:
|
|
|
|
include::../api/protos/vkGetEventStatus.txt[]
|
|
|
|
* pname:device is the logical device that owns the event.
|
|
* pname:event is the handle of the event to query.
|
|
|
|
Upon success, fname:vkGetEventStatus returns the state of the event object
|
|
with the following return codes:
|
|
|
|
.Event Object Status Codes
|
|
[width="80%",options="header"]
|
|
|====
|
|
| Status | Meaning
|
|
| ename:VK_EVENT_SET | The event specified by pname:event is signaled.
|
|
| ename:VK_EVENT_RESET | The event specified by pname:event is unsignaled.
|
|
|====
|
|
|
|
If a fname:vkCmdSetEvent or fname:vkCmdResetEvent command is in a command
|
|
buffer that is in the <<commandbuffers-lifecycle, pending state>>, then the
|
|
value returned by this command may: immediately be out of date.
|
|
|
|
The state of an event can: be updated by the host.
|
|
The state of the event is immediately changed, and subsequent calls to
|
|
fname:vkGetEventStatus will return the new state.
|
|
If an event is already in the requested state, then updating it to the same
|
|
state has no effect.
|
|
|
|
include::../validity/protos/vkGetEventStatus.txt[]
|
|
--
|
|
|
|
[[synchronization-events-signaling-host]]
|
|
[open,refpage='vkSetEvent',desc='Set an event to signaled state',type='protos']
|
|
--
|
|
|
|
To set the state of an event to signaled from the host, call:
|
|
|
|
include::../api/protos/vkSetEvent.txt[]
|
|
|
|
* pname:device is the logical device that owns the event.
|
|
* pname:event is the event to set.
|
|
|
|
When flink:vkSetEvent is executed on the host, it defines an _event signal
|
|
operation_ which sets the event to the signaled state.
|
|
|
|
If pname:event is already in the signaled state when flink:vkSetEvent is
|
|
executed, then flink:vkSetEvent has no effect, and no event signal operation
|
|
occurs.
|
|
|
|
include::../validity/protos/vkSetEvent.txt[]
|
|
--
|
|
|
|
[[synchronization-events-unsignaling-host]]
|
|
[open,refpage='vkResetEvent',desc='Reset an event to non-signaled state',type='protos']
|
|
--
|
|
|
|
To set the state of an event to unsignaled from the host, call:
|
|
|
|
include::../api/protos/vkResetEvent.txt[]
|
|
|
|
* pname:device is the logical device that owns the event.
|
|
* pname:event is the event to reset.
|
|
|
|
When flink:vkResetEvent is executed on the host, it defines an _event
|
|
unsignal operation_ which resets the event to the unsignaled state.
|
|
|
|
If pname:event is already in the unsignaled state when flink:vkResetEvent is
|
|
executed, then flink:vkResetEvent has no effect, and no event unsignal
|
|
operation occurs.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkResetEvent-event-01148]]
|
|
pname:event must: not be waited on by a fname:vkCmdWaitEvents command
|
|
that is currently executing
|
|
****
|
|
|
|
include::../validity/protos/vkResetEvent.txt[]
|
|
--
|
|
|
|
|
|
The state of an event can: also be updated on the device by commands
|
|
inserted in command buffers.
|
|
|
|
[[synchronization-events-signaling-device]]
|
|
[open,refpage='vkCmdSetEvent',desc='Set an event object to signaled state',type='protos']
|
|
--
|
|
|
|
To set the state of an event to signaled from a device, call:
|
|
|
|
include::../api/protos/vkCmdSetEvent.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which the command is
|
|
recorded.
|
|
* pname:event is the event that will be signaled.
|
|
* pname:stageMask specifies the <<synchronization-pipeline-stages,source
|
|
stage mask>> used to determine when the pname:event is signaled.
|
|
|
|
When flink:vkCmdSetEvent is submitted to a queue, it defines an execution
|
|
dependency on commands that were submitted before it, and defines an event
|
|
signal operation which sets the event to the signaled state.
|
|
|
|
The first <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes every command previously submitted to the same queue, including
|
|
those in the same command buffer and batch.
|
|
The synchronization scope is limited to operations on the pipeline stages
|
|
determined by the <<synchronization-pipeline-stages-masks, source stage
|
|
mask>> specified by pname:stageMask.
|
|
|
|
The second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes only the event signal operation.
|
|
|
|
If pname:event is already in the signaled state when flink:vkCmdSetEvent is
|
|
executed on the device, then flink:vkCmdSetEvent has no effect, no event
|
|
signal operation occurs, and no execution dependency is generated.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdSetEvent-stageMask-01149]]
|
|
pname:stageMask must: not include ename:VK_PIPELINE_STAGE_HOST_BIT
|
|
* [[VUID-vkCmdSetEvent-stageMask-01150]]
|
|
If the <<features-features-geometryShader,geometry shaders>> feature is
|
|
not enabled, pname:stageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
|
|
* [[VUID-vkCmdSetEvent-stageMask-01151]]
|
|
If the <<features-features-tessellationShader,tessellation shaders>>
|
|
feature is not enabled, pname:stageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
|
|
ifdef::VK_KHX_device_group[]
|
|
* [[VUID-vkCmdSetEvent-commandBuffer-01152]]
|
|
pname:commandBuffer's current device mask must: include exactly one
|
|
physical device.
|
|
endif::VK_KHX_device_group[]
|
|
****
|
|
|
|
include::../validity/protos/vkCmdSetEvent.txt[]
|
|
--
|
|
|
|
[[synchronization-events-unsignaling-device]]
|
|
[open,refpage='vkCmdResetEvent',desc='Reset an event object to non-signaled state',type='protos']
|
|
--
|
|
|
|
To set the state of an event to unsignaled from a device, call:
|
|
|
|
include::../api/protos/vkCmdResetEvent.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which the command is
|
|
recorded.
|
|
* pname:event is the event that will be unsignaled.
|
|
* pname:stageMask is a bitmask of elink:VkPipelineStageFlagBits specifying
|
|
the <<synchronization-pipeline-stages, source stage mask>> used to
|
|
determine when the pname:event is unsignaled.
|
|
|
|
When flink:vkCmdResetEvent is submitted to a queue, it defines an execution
|
|
dependency on commands that were submitted before it, and defines an event
|
|
unsignal operation which resets the event to the unsignaled state.
|
|
|
|
The first <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes every command previously submitted to the same queue, including
|
|
those in the same command buffer and batch.
|
|
The synchronization scope is limited to operations on the pipeline stages
|
|
determined by the <<synchronization-pipeline-stages-masks, source stage
|
|
mask>> specified by pname:stageMask.
|
|
|
|
The second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes only the event unsignal operation.
|
|
|
|
If pname:event is already in the unsignaled state when flink:vkCmdResetEvent
|
|
is executed on the device, then flink:vkCmdResetEvent has no effect, no
|
|
event unsignal operation occurs, and no execution dependency is generated.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdResetEvent-stageMask-01153]]
|
|
pname:stageMask must: not include ename:VK_PIPELINE_STAGE_HOST_BIT
|
|
* [[VUID-vkCmdResetEvent-stageMask-01154]]
|
|
If the <<features-features-geometryShader,geometry shaders>> feature is
|
|
not enabled, pname:stageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
|
|
* [[VUID-vkCmdResetEvent-stageMask-01155]]
|
|
If the <<features-features-tessellationShader,tessellation shaders>>
|
|
feature is not enabled, pname:stageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
|
|
* [[VUID-vkCmdResetEvent-event-01156]]
|
|
When this command executes, pname:event must: not be waited on by a
|
|
fname:vkCmdWaitEvents command that is currently executing
|
|
ifdef::VK_KHX_device_group[]
|
|
* [[VUID-vkCmdResetEvent-commandBuffer-01157]]
|
|
pname:commandBuffer's current device mask must: include exactly one
|
|
physical device.
|
|
endif::VK_KHX_device_group[]
|
|
****
|
|
|
|
include::../validity/protos/vkCmdResetEvent.txt[]
|
|
--
|
|
|
|
[open,refpage='vkCmdWaitEvents',desc='Wait for one or more events and insert a set of memory',type='protos']
|
|
--
|
|
|
|
To wait for one or more events to enter the signaled state on a device,
|
|
call:
|
|
|
|
[[synchronization-events-waiting-device]]
|
|
include::../api/protos/vkCmdWaitEvents.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which the command is
|
|
recorded.
|
|
* pname:eventCount is the length of the pname:pEvents array.
|
|
* pname:pEvents is an array of event object handles to wait on.
|
|
* pname:srcStageMask is a bitmask of elink:VkPipelineStageFlagBits
|
|
specifying the <<synchronization-pipeline-stages, source stage mask>>.
|
|
* pname:dstStageMask is a bitmask of elink:VkPipelineStageFlagBits
|
|
specifying the <<synchronization-pipeline-stages, destination stage
|
|
mask>>.
|
|
* pname:memoryBarrierCount is the length of the pname:pMemoryBarriers
|
|
array.
|
|
* pname:pMemoryBarriers is a pointer to an array of slink:VkMemoryBarrier
|
|
structures.
|
|
* pname:bufferMemoryBarrierCount is the length of the
|
|
pname:pBufferMemoryBarriers array.
|
|
* pname:pBufferMemoryBarriers is a pointer to an array of
|
|
slink:VkBufferMemoryBarrier structures.
|
|
* pname:imageMemoryBarrierCount is the length of the
|
|
pname:pImageMemoryBarriers array.
|
|
* pname:pImageMemoryBarriers is a pointer to an array of
|
|
slink:VkImageMemoryBarrier structures.
|
|
|
|
When fname:vkCmdWaitEvents is submitted to a queue, it defines a memory
|
|
dependency between prior event signal operations on the same queue or the
|
|
host, and subsequent commands.
|
|
fname:vkCmdWaitEvents must: not be used to wait on event signal operations
|
|
occuring on other queues.
|
|
|
|
The first synchronization scope only includes event signal operations that
|
|
operate on members of pname:pEvents, and the operations that happened-before
|
|
the event signal operations.
|
|
Event signal operations performed by flink:vkCmdSetEvent that were
|
|
previously submitted to the same queue are included in the first
|
|
synchronization scope, if the <<synchronization-pipeline-stages-order,
|
|
logically latest>> pipeline stage in their pname:stageMask parameter is
|
|
<<synchronization-pipeline-stages-order, logically earlier>> than or equal
|
|
to the <<synchronization-pipeline-stages-order, logically latest>> pipeline
|
|
stage in pname:srcStageMask.
|
|
Event signal operations performed by flink:vkSetEvent are only included in
|
|
the first synchronization scope if ename:VK_PIPELINE_STAGE_HOST_BIT is
|
|
included in pname:srcStageMask.
|
|
|
|
The second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes commands subsequently submitted to the same queue, including those
|
|
in the same command buffer and batch.
|
|
The second synchronization scope is limited to operations on the pipeline
|
|
stages determined by the <<synchronization-pipeline-stages-masks,
|
|
destination stage mask>> specified by pname:dstStageMask.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access in the pipeline stages determined by the
|
|
<<synchronization-pipeline-stages-masks, source stage mask>> specified by
|
|
pname:srcStageMask.
|
|
Within that, the first access scope only includes the first access scopes
|
|
defined by elements of the pname:pMemoryBarriers,
|
|
pname:pBufferMemoryBarriers and pname:pImageMemoryBarriers arrays, which
|
|
each define a set of <<synchronization-memory-barriers, memory barriers>>.
|
|
If no memory barriers are specified, then the first access scope includes no
|
|
accesses.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access in the pipeline stages determined by the
|
|
<<synchronization-pipeline-stages-masks, destination stage mask>> specified
|
|
by pname:dstStageMask.
|
|
Within that, the second access scope only includes the second access scopes
|
|
defined by elements of the pname:pMemoryBarriers,
|
|
pname:pBufferMemoryBarriers and pname:pImageMemoryBarriers arrays, which
|
|
each define a set of <<synchronization-memory-barriers, memory barriers>>.
|
|
If no memory barriers are specified, then the second access scope includes
|
|
no accesses.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
flink:vkCmdWaitEvents is used with flink:vkCmdSetEvent to define a memory
|
|
dependency between two sets of action commands, roughly in the same way as
|
|
pipeline barriers, but split into two commands such that work between the
|
|
two may: execute unhindered.
|
|
====
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Applications should: be careful to avoid race conditions when using events.
|
|
There is no direct ordering guarantee between a flink:vkCmdResetEvent
|
|
command and a flink:vkCmdWaitEvents command submitted after it, so some
|
|
other execution dependency must: be included between these commands (e.g. a
|
|
semaphore).
|
|
====
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdWaitEvents-srcStageMask-01158]]
|
|
pname:srcStageMask must: be the bitwise OR of the pname:stageMask
|
|
parameter used in previous calls to fname:vkCmdSetEvent with any of the
|
|
members of pname:pEvents and ename:VK_PIPELINE_STAGE_HOST_BIT if any of
|
|
the members of pname:pEvents was set using fname:vkSetEvent
|
|
* [[VUID-vkCmdWaitEvents-srcStageMask-01159]]
|
|
If the <<features-features-geometryShader,geometry shaders>> feature is
|
|
not enabled, pname:srcStageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
|
|
* [[VUID-vkCmdWaitEvents-dstStageMask-01160]]
|
|
If the <<features-features-geometryShader,geometry shaders>> feature is
|
|
not enabled, pname:dstStageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
|
|
* [[VUID-vkCmdWaitEvents-srcStageMask-01161]]
|
|
If the <<features-features-tessellationShader,tessellation shaders>>
|
|
feature is not enabled, pname:srcStageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
|
|
* [[VUID-vkCmdWaitEvents-dstStageMask-01162]]
|
|
If the <<features-features-tessellationShader,tessellation shaders>>
|
|
feature is not enabled, pname:dstStageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
|
|
* [[VUID-vkCmdWaitEvents-pEvents-01163]]
|
|
If pname:pEvents includes one or more events that will be signaled by
|
|
fname:vkSetEvent after pname:commandBuffer has been submitted to a
|
|
queue, then fname:vkCmdWaitEvents must: not be called inside a render
|
|
pass instance
|
|
* [[VUID-vkCmdWaitEvents-srcStageMask-01164]]
|
|
Any pipeline stage included in pname:srcStageMask or pname:dstStageMask
|
|
must: be supported by the capabilities of the queue family specified by
|
|
the pname:queueFamilyIndex member of the slink:VkCommandPoolCreateInfo
|
|
structure that was used to create the sname:VkCommandPool that
|
|
pname:commandBuffer was allocated from, as specified in the
|
|
<<synchronization-pipeline-stages-supported, table of supported pipeline
|
|
stages>>.
|
|
* [[VUID-vkCmdWaitEvents-pMemoryBarriers-01165]]
|
|
Each element of pname:pMemoryBarriers, pname:pBufferMemoryBarriers or
|
|
pname:pImageMemoryBarriers must: not have any access flag included in
|
|
its pname:srcAccessMask member if that bit is not supported by any of
|
|
the pipeline stages in pname:srcStageMask, as specified in the
|
|
<<synchronization-access-types-supported, table of supported access
|
|
types>>.
|
|
* [[VUID-vkCmdWaitEvents-pMemoryBarriers-01166]]
|
|
Each element of pname:pMemoryBarriers, pname:pBufferMemoryBarriers or
|
|
pname:pImageMemoryBarriers must: not have any access flag included in
|
|
its pname:dstAccessMask member if that bit is not supported by any of
|
|
the pipeline stages in pname:dstStageMask, as specified in the
|
|
<<synchronization-access-types-supported, table of supported access
|
|
types>>.
|
|
ifdef::VK_KHX_device_group[]
|
|
* [[VUID-vkCmdWaitEvents-commandBuffer-01167]]
|
|
pname:commandBuffer's current device mask must: include exactly one
|
|
physical device.
|
|
endif::VK_KHX_device_group[]
|
|
****
|
|
|
|
include::../validity/protos/vkCmdWaitEvents.txt[]
|
|
--
|
|
|
|
|
|
[[synchronization-pipeline-barriers]]
|
|
== Pipeline Barriers
|
|
|
|
flink:vkCmdPipelineBarrier is a synchronization command that inserts a
|
|
dependency between commands submitted to the same queue, or between commands
|
|
in the same subpass.
|
|
|
|
[open,refpage='vkCmdPipelineBarrier',desc='Insert a memory dependency',type='protos']
|
|
--
|
|
|
|
To record a pipeline barrier, call:
|
|
|
|
include::../api/protos/vkCmdPipelineBarrier.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which the command is
|
|
recorded.
|
|
* pname:srcStageMask is a bitmask of elink:VkPipelineStageFlagBits
|
|
specifying the <<synchronization-pipeline-stages-masks, source stage
|
|
mask>>.
|
|
* pname:dstStageMask is a bitmask of elink:VkPipelineStageFlagBits
|
|
specifying the <<synchronization-pipeline-stages-masks, destination
|
|
stage mask>>.
|
|
* pname:dependencyFlags is a bitmask of elink:VkDependencyFlagBits
|
|
specifying how execution and memory dependencies are formed.
|
|
* pname:memoryBarrierCount is the length of the pname:pMemoryBarriers
|
|
array.
|
|
* pname:pMemoryBarriers is a pointer to an array of slink:VkMemoryBarrier
|
|
structures.
|
|
* pname:bufferMemoryBarrierCount is the length of the
|
|
pname:pBufferMemoryBarriers array.
|
|
* pname:pBufferMemoryBarriers is a pointer to an array of
|
|
slink:VkBufferMemoryBarrier structures.
|
|
* pname:imageMemoryBarrierCount is the length of the
|
|
pname:pImageMemoryBarriers array.
|
|
* pname:pImageMemoryBarriers is a pointer to an array of
|
|
slink:VkImageMemoryBarrier structures.
|
|
|
|
When flink:vkCmdPipelineBarrier is submitted to a queue, it defines a memory
|
|
dependency between commands that were submitted before it, and those
|
|
submitted after it.
|
|
|
|
If flink:vkCmdPipelineBarrier was recorded outside a render pass instance,
|
|
the first <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes every command submitted to the same queue before it, including
|
|
those in the same command buffer and batch.
|
|
If flink:vkCmdPipelineBarrier was recorded inside a render pass instance,
|
|
the first synchronization scope includes only commands submitted before it
|
|
within the same subpass.
|
|
In either case, the first synchronization scope is limited to operations on
|
|
the pipeline stages determined by the
|
|
<<synchronization-pipeline-stages-masks, source stage mask>> specified by
|
|
pname:srcStageMask.
|
|
|
|
If flink:vkCmdPipelineBarrier was recorded outside a render pass instance,
|
|
the second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes every command submitted to the same queue after it, including those
|
|
in the same command buffer and batch.
|
|
If flink:vkCmdPipelineBarrier was recorded inside a render pass instance,
|
|
the second synchronization scope includes only commands submitted after it
|
|
within the same subpass.
|
|
In either case, the second synchronization scope is limited to operations on
|
|
the pipeline stages determined by the
|
|
<<synchronization-pipeline-stages-masks, destination stage mask>> specified
|
|
by pname:dstStageMask.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access in the pipeline stages determined by the
|
|
<<synchronization-pipeline-stages-masks, source stage mask>> specified by
|
|
pname:srcStageMask.
|
|
Within that, the first access scope only includes the first access scopes
|
|
defined by elements of the pname:pMemoryBarriers,
|
|
pname:pBufferMemoryBarriers and pname:pImageMemoryBarriers arrays, which
|
|
each define a set of <<synchronization-memory-barriers, memory barriers>>.
|
|
If no memory barriers are specified, then the first access scope includes no
|
|
accesses.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access in the pipeline stages determined by the
|
|
<<synchronization-pipeline-stages-masks, destination stage mask>> specified
|
|
by pname:dstStageMask.
|
|
Within that, the second access scope only includes the second access scopes
|
|
defined by elements of the pname:pMemoryBarriers,
|
|
pname:pBufferMemoryBarriers and pname:pImageMemoryBarriers arrays, which
|
|
each define a set of <<synchronization-memory-barriers, memory barriers>>.
|
|
If no memory barriers are specified, then the second access scope includes
|
|
no accesses.
|
|
|
|
If pname:dependencyFlags includes ename:VK_DEPENDENCY_BY_REGION_BIT, then
|
|
any dependency between <<synchronization-framebuffer-regions,
|
|
framebuffer-space>> pipeline stages is
|
|
<<synchronization-framebuffer-regions, framebuffer-local>> - otherwise it is
|
|
<<synchronization-framebuffer-regions, framebuffer-global>>.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdPipelineBarrier-srcStageMask-01168]]
|
|
If the <<features-features-geometryShader,geometry shaders>> feature is
|
|
not enabled, pname:srcStageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
|
|
* [[VUID-vkCmdPipelineBarrier-dstStageMask-01169]]
|
|
If the <<features-features-geometryShader,geometry shaders>> feature is
|
|
not enabled, pname:dstStageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
|
|
* [[VUID-vkCmdPipelineBarrier-srcStageMask-01170]]
|
|
If the <<features-features-tessellationShader,tessellation shaders>>
|
|
feature is not enabled, pname:srcStageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
|
|
* [[VUID-vkCmdPipelineBarrier-dstStageMask-01171]]
|
|
If the <<features-features-tessellationShader,tessellation shaders>>
|
|
feature is not enabled, pname:dstStageMask must: not contain
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
|
|
ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
|
|
* [[VUID-vkCmdPipelineBarrier-pDependencies-01172]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
the render pass must: have been created with a sname:VkSubpassDependency
|
|
instance in pname:pDependencies that expresses a dependency from the
|
|
current subpass to itself.
|
|
* [[VUID-vkCmdPipelineBarrier-srcStageMask-01173]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
pname:srcStageMask must: contain a subset of the bit values in the
|
|
pname:srcStageMask member of that instance of sname:VkSubpassDependency
|
|
* [[VUID-vkCmdPipelineBarrier-dstStageMask-01174]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
pname:dstStageMask must: contain a subset of the bit values in the
|
|
pname:dstStageMask member of that instance of sname:VkSubpassDependency
|
|
* [[VUID-vkCmdPipelineBarrier-srcAccessMask-01175]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
the pname:srcAccessMask of any element of pname:pMemoryBarriers or
|
|
pname:pImageMemoryBarriers must: contain a subset of the bit values the
|
|
pname:srcAccessMask member of that instance of sname:VkSubpassDependency
|
|
* [[VUID-vkCmdPipelineBarrier-dstAccessMask-01176]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
the pname:dstAccessMask of any element of pname:pMemoryBarriers or
|
|
pname:pImageMemoryBarriers must: contain a subset of the bit values the
|
|
pname:dstAccessMask member of that instance of sname:VkSubpassDependency
|
|
* [[VUID-vkCmdPipelineBarrier-dependencyFlags-01177]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
pname:dependencyFlags must: be equal to the pname:dependencyFlags member
|
|
of that instance of sname:VkSubpassDependency
|
|
* [[VUID-vkCmdPipelineBarrier-bufferMemoryBarrierCount-01178]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
pname:bufferMemoryBarrierCount must: be `0`
|
|
* [[VUID-vkCmdPipelineBarrier-image-01179]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
the pname:image member of any element of pname:pImageMemoryBarriers
|
|
must: be equal to one of the elements of pname:pAttachments that the
|
|
current pname:framebuffer was created with, that is also referred to by
|
|
one of the elements of the pname:pColorAttachments,
|
|
pname:pResolveAttachments or pname:pDepthStencilAttachment members of
|
|
the sname:VkSubpassDescription instance that the current subpass was
|
|
created with
|
|
* [[VUID-vkCmdPipelineBarrier-oldLayout-01180]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
the pname:oldLayout and pname:newLayout members of any element of
|
|
pname:pImageMemoryBarriers must: be equal to the pname:layout member of
|
|
an element of the pname:pColorAttachments, pname:pResolveAttachments or
|
|
pname:pDepthStencilAttachment members of the sname:VkSubpassDescription
|
|
instance that the current subpass was created with, that refers to the
|
|
same pname:image
|
|
* [[VUID-vkCmdPipelineBarrier-oldLayout-01181]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
the pname:oldLayout and pname:newLayout members of an element of
|
|
pname:pImageMemoryBarriers must: be equal
|
|
* [[VUID-vkCmdPipelineBarrier-srcQueueFamilyIndex-01182]]
|
|
If fname:vkCmdPipelineBarrier is called within a render pass instance,
|
|
the pname:srcQueueFamilyIndex and pname:dstQueueFamilyIndex members of
|
|
any element of pname:pImageMemoryBarriers must: be
|
|
ename:VK_QUEUE_FAMILY_IGNORED
|
|
* [[VUID-vkCmdPipelineBarrier-srcStageMask-01183]]
|
|
Any pipeline stage included in pname:srcStageMask or pname:dstStageMask
|
|
must: be supported by the capabilities of the queue family specified by
|
|
the pname:queueFamilyIndex member of the slink:VkCommandPoolCreateInfo
|
|
structure that was used to create the sname:VkCommandPool that
|
|
pname:commandBuffer was allocated from, as specified in the
|
|
<<synchronization-pipeline-stages-supported, table of supported pipeline
|
|
stages>>.
|
|
* [[VUID-vkCmdPipelineBarrier-pMemoryBarriers-01184]]
|
|
Each element of pname:pMemoryBarriers, pname:pBufferMemoryBarriers and
|
|
pname:pImageMemoryBarriers must: not have any access flag included in
|
|
its pname:srcAccessMask member if that bit is not supported by any of
|
|
the pipeline stages in pname:srcStageMask, as specified in the
|
|
<<synchronization-access-types-supported, table of supported access
|
|
types>>.
|
|
* [[VUID-vkCmdPipelineBarrier-pMemoryBarriers-01185]]
|
|
Each element of pname:pMemoryBarriers, pname:pBufferMemoryBarriers and
|
|
pname:pImageMemoryBarriers must: not have any access flag included in
|
|
its pname:dstAccessMask member if that bit is not supported by any of
|
|
the pipeline stages in pname:dstStageMask, as specified in the
|
|
<<synchronization-access-types-supported, table of supported access
|
|
types>>.
|
|
ifdef::VK_KHX_multiview[]
|
|
* [[VUID-vkCmdPipelineBarrier-dependencyFlags-01186]]
|
|
If fname:vkCmdPipelineBarrier is called outside of a render pass
|
|
instance, pname:dependencyFlags must: not include
|
|
ename:VK_DEPENDENCY_VIEW_LOCAL_BIT_KHX
|
|
endif::VK_KHX_multiview[]
|
|
****
|
|
|
|
include::../validity/protos/vkCmdPipelineBarrier.txt[]
|
|
--
|
|
|
|
[open,refpage='VkDependencyFlagBits',desc='Bitmask specifying how execution and memory dependencies are formed',type='enums']
|
|
--
|
|
|
|
Bits which can: be set in vkCmdPipelineBarrier::pname:dependencyFlags,
|
|
specifying how execution and memory dependencies are formed, are:
|
|
|
|
include::../api/enums/VkDependencyFlagBits.txt[]
|
|
|
|
* ename:VK_DEPENDENCY_BY_REGION_BIT specifies that dependencies will be
|
|
<<synchronization-framebuffer-regions, framebuffer-local>>.
|
|
ifdef::VK_KHX_multiview[]
|
|
* ename:VK_DEPENDENCY_VIEW_LOCAL_BIT_KHX specifies that a
|
|
<<synchronization-pipeline-barriers-subpass-self-dependencies, subpass
|
|
has more than one view>>.
|
|
endif::VK_KHX_multiview[]
|
|
ifdef::VK_KHX_device_group[]
|
|
* ename:VK_DEPENDENCY_DEVICE_GROUP_BIT_KHX specifies that dependencies are
|
|
<<synchronization-device-local-dependencies, non-device-local
|
|
dependency>>.
|
|
endif::VK_KHX_device_group[]
|
|
|
|
--
|
|
|
|
|
|
[[synchronization-pipeline-barriers-subpass-self-dependencies]]
|
|
=== Subpass Self-dependency
|
|
|
|
If fname:vkCmdPipelineBarrier is called inside a render pass instance, the
|
|
following restrictions apply.
|
|
For a given subpass to allow a pipeline barrier, the render pass must:
|
|
declare a _self-dependency_ from that subpass to itself.
|
|
That is, there must: exist a sname:VkSubpassDependency in the subpass
|
|
dependency list for the render pass with pname:srcSubpass and
|
|
pname:dstSubpass equal to that subpass index.
|
|
More than one self-dependency can: be declared for each subpass.
|
|
Self-dependencies must: only include pipeline stage bits that are graphics
|
|
stages.
|
|
Self-dependencies must: not have any earlier pipeline stages depend on any
|
|
later pipeline stages (according to the order of
|
|
<<synchronization-pipeline-stages-types,graphics pipeline stages>>), unless
|
|
all of the stages are
|
|
<<synchronization-framebuffer-regions,framebuffer-space stages>>.
|
|
If the source and destination stage masks both include framebuffer-space
|
|
stages, then pname:dependencyFlags must: include
|
|
ename:VK_DEPENDENCY_BY_REGION_BIT.
|
|
ifdef::VK_KHX_multiview[]
|
|
If the subpass has more than one view, then pname:dependencyFlags must:
|
|
include ename:VK_DEPENDENCY_VIEW_LOCAL_BIT_KHX.
|
|
endif::VK_KHX_multiview[]
|
|
|
|
A fname:vkCmdPipelineBarrier command inside a render pass instance must: be
|
|
a _subset_ of one of the self-dependencies of the subpass it is used in,
|
|
meaning that the stage masks and access masks must: each include only a
|
|
subset of the bits of the corresponding mask in that self-dependency.
|
|
If the self-dependency has ename:VK_DEPENDENCY_BY_REGION_BIT
|
|
ifdef::VK_KHX_multiview[]
|
|
or ename:VK_DEPENDENCY_VIEW_LOCAL_BIT_KHX
|
|
endif::VK_KHX_multiview[]
|
|
set, then so must: the pipeline barrier.
|
|
Pipeline barriers within a render pass instance can: only be types
|
|
sname:VkMemoryBarrier or sname:VkImageMemoryBarrier.
|
|
If a sname:VkImageMemoryBarrier is used, the image and image subresource
|
|
range specified in the barrier must: be a subset of one of the image views
|
|
used by the framebuffer in the current subpass.
|
|
Additionally, pname:oldLayout must: be equal to pname:newLayout, and both
|
|
the pname:srcQueueFamilyIndex and pname:dstQueueFamilyIndex must: be
|
|
ename:VK_QUEUE_FAMILY_IGNORED.
|
|
|
|
|
|
[[synchronization-memory-barriers]]
|
|
== Memory Barriers
|
|
|
|
_Memory barriers_ are used to explicitly control access to buffer and image
|
|
subresource ranges.
|
|
Memory barriers are used to <<synchronization-queue-transfers, transfer
|
|
ownership between queue families>>,
|
|
<<synchronization-image-layout-transitions, change image layouts>>, and
|
|
define <<synchronization-dependencies-available-and-visible, availability
|
|
and visibility operations>>.
|
|
They explicitly define the <<synchronization-access-types, access types>>
|
|
and buffer and image subresource ranges that are included in the
|
|
<<synchronization-dependencies-access-scopes, access scopes>> of a memory
|
|
dependency that is created by a synchronization command that includes them.
|
|
|
|
|
|
[[synchronization-global-memory-barriers]]
|
|
=== Global Memory Barriers
|
|
|
|
Global memory barriers apply to memory accesses involving all memory objects
|
|
that exist at the time of its execution.
|
|
|
|
[open,refpage='VkMemoryBarrier',desc='Structure specifying a global memory barrier',type='structs']
|
|
--
|
|
|
|
The sname:VkMemoryBarrier structure is defined as:
|
|
|
|
include::../api/structs/VkMemoryBarrier.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:srcAccessMask is a bitmask of elink:VkAccessFlagBits specifying a
|
|
<<synchronization-access-masks, source access mask>>.
|
|
* pname:dstAccessMask is a bitmask of elink:VkAccessFlagBits specifying a
|
|
<<synchronization-access-masks, destination access mask>>.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access types in the <<synchronization-access-masks, source access
|
|
mask>> specified by pname:srcAccessMask.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access types in the <<synchronization-access-masks, destination
|
|
access mask>> specified by pname:dstAccessMask.
|
|
|
|
include::../validity/structs/VkMemoryBarrier.txt[]
|
|
--
|
|
|
|
|
|
[[synchronization-buffer-memory-barriers]]
|
|
=== Buffer Memory Barriers
|
|
|
|
Buffer memory barriers only apply to memory accesses involving a specific
|
|
buffer range.
|
|
That is, a memory dependency formed from an buffer memory barrier is
|
|
<<synchronization-dependencies-access-scopes, scoped>> to access via the
|
|
specified buffer range.
|
|
Buffer memory barriers can: also be used to define a
|
|
<<synchronization-queue-transfers, queue family ownership transfer>> for the
|
|
specified buffer range.
|
|
|
|
[open,refpage='VkBufferMemoryBarrier',desc='Structure specifying a buffer memory barrier',type='structs']
|
|
--
|
|
|
|
The sname:VkBufferMemoryBarrier structure is defined as:
|
|
|
|
include::../api/structs/VkBufferMemoryBarrier.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:srcAccessMask is a bitmask of elink:VkAccessFlagBits specifying a
|
|
<<synchronization-access-masks, source access mask>>.
|
|
* pname:dstAccessMask is a bitmask of elink:VkAccessFlagBits specifying a
|
|
<<synchronization-access-masks, destination access mask>>.
|
|
* pname:srcQueueFamilyIndex is the source queue family for a
|
|
<<synchronization-queue-transfers, queue family ownership transfer>>.
|
|
* pname:dstQueueFamilyIndex is the destination queue family for a
|
|
<<synchronization-queue-transfers, queue family ownership transfer>>.
|
|
* pname:buffer is a handle to the buffer whose backing memory is affected
|
|
by the barrier.
|
|
* pname:offset is an offset in bytes into the backing memory for
|
|
pname:buffer; this is relative to the base offset as bound to the buffer
|
|
(see flink:vkBindBufferMemory).
|
|
* pname:size is a size in bytes of the affected area of backing memory for
|
|
pname:buffer, or ename:VK_WHOLE_SIZE to use the range from pname:offset
|
|
to the end of the buffer.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access to memory through the specified buffer range, via access
|
|
types in the <<synchronization-access-masks, source access mask>> specified
|
|
by pname:srcAccessMask.
|
|
If pname:srcAccessMask includes ename:VK_ACCESS_HOST_WRITE_BIT, memory
|
|
writes performed by that access type are also made visible, as that access
|
|
type is not performed through a resource.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access to memory through the specified buffer range, via access
|
|
types in the <<synchronization-access-masks, destination access mask>>.
|
|
specified by pname:dstAccessMask.
|
|
If pname:dstAccessMask includes ename:VK_ACCESS_HOST_WRITE_BIT or
|
|
ename:VK_ACCESS_HOST_READ_BIT, available memory writes are also made visible
|
|
to accesses of those types, as those access types are not performed through
|
|
a resource.
|
|
|
|
If pname:srcQueueFamilyIndex is not equal to pname:dstQueueFamilyIndex, and
|
|
pname:srcQueueFamilyIndex is equal to the current queue family, then the
|
|
memory barrier defines a <<synchronization-queue-transfers-release, queue
|
|
family release operation>> for the specified buffer range, and the second
|
|
access scope includes no access, as if pname:dstAccessMask was `0`.
|
|
|
|
If pname:dstQueueFamilyIndex is not equal to pname:srcQueueFamilyIndex, and
|
|
pname:dstQueueFamilyIndex is equal to the current queue family, then the
|
|
memory barrier defines a <<synchronization-queue-transfers-acquire, queue
|
|
family acquire operation>> for the specified buffer range, and the first
|
|
access scope includes no access, as if pname:srcAccessMask was `0`.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkBufferMemoryBarrier-offset-01187]]
|
|
pname:offset must: be less than the size of pname:buffer
|
|
* [[VUID-VkBufferMemoryBarrier-size-01188]]
|
|
If pname:size is not equal to ename:VK_WHOLE_SIZE, pname:size must: be
|
|
greater than `0`
|
|
* [[VUID-VkBufferMemoryBarrier-size-01189]]
|
|
If pname:size is not equal to ename:VK_WHOLE_SIZE, pname:size must: be
|
|
less than or equal to than the size of pname:buffer minus pname:offset
|
|
ifndef::VK_KHR_external_memory[]
|
|
* [[VUID-VkBufferMemoryBarrier-buffer-01190]]
|
|
If pname:buffer was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_CONCURRENT, pname:srcQueueFamilyIndex and
|
|
pname:dstQueueFamilyIndex must: both be ename:VK_QUEUE_FAMILY_IGNORED
|
|
endif::VK_KHR_external_memory[]
|
|
ifdef::VK_KHR_external_memory[]
|
|
* [[VUID-VkBufferMemoryBarrier-buffer-01191]]
|
|
If pname:buffer was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_CONCURRENT, at least one of
|
|
pname:srcQueueFamilyIndex and pname:dstQueueFamilyIndex must: be
|
|
ename:VK_QUEUE_FAMILY_IGNORED
|
|
* [[VUID-VkBufferMemoryBarrier-buffer-01380]]
|
|
If pname:buffer was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_CONCURRENT, and one of pname:srcQueueFamilyIndex
|
|
and pname:dstQueueFamilyIndex is ename:VK_QUEUE_FAMILY_IGNORED, the
|
|
other must: be ename:VK_QUEUE_FAMILY_IGNORED or
|
|
ename:VK_QUEUE_FAMILY_EXTERNAL_KHR
|
|
endif::VK_KHR_external_memory[]
|
|
ifndef::VK_KHR_external_memory[]
|
|
* [[VUID-VkBufferMemoryBarrier-buffer-01192]]
|
|
If pname:buffer was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE, pname:srcQueueFamilyIndex and
|
|
pname:dstQueueFamilyIndex must: either both be
|
|
ename:VK_QUEUE_FAMILY_IGNORED, or both be a valid queue family (see
|
|
<<devsandqueues-queueprops>>)
|
|
endif::VK_KHR_external_memory[]
|
|
ifdef::VK_KHR_external_memory[]
|
|
* [[VUID-VkBufferMemoryBarrier-buffer-01193]]
|
|
If pname:buffer was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE and pname:srcQueueFamilyIndex is
|
|
ename:VK_QUEUE_FAMILY_IGNORED, pname:dstQueueFamilyIndex must: also be
|
|
ename:VK_QUEUE_FAMILY_IGNORED
|
|
* [[VUID-VkBufferMemoryBarrier-buffer-01194]]
|
|
If pname:buffer was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE and pname:srcQueueFamilyIndex is not
|
|
ename:VK_QUEUE_FAMILY_IGNORED, it must: be a valid queue family or
|
|
ename:VK_QUEUE_FAMILY_EXTERNAL_KHR (see <<devsandqueues-queueprops>>)
|
|
* [[VUID-VkBufferMemoryBarrier-buffer-01195]]
|
|
If pname:buffer was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE and pname:dstQueueFamilyIndex is not
|
|
ename:VK_QUEUE_FAMILY_IGNORED, it must: be a valid queue family or
|
|
ename:VK_QUEUE_FAMILY_EXTERNAL_KHR (see <<devsandqueues-queueprops>>)
|
|
endif::VK_KHR_external_memory[]
|
|
* [[VUID-VkBufferMemoryBarrier-buffer-01196]]
|
|
If pname:buffer was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE, and pname:srcQueueFamilyIndex and
|
|
pname:dstQueueFamilyIndex are not ename:VK_QUEUE_FAMILY_IGNORED, at
|
|
least one of them must: be the same as the family of the queue that will
|
|
execute this barrier
|
|
****
|
|
|
|
include::../validity/structs/VkBufferMemoryBarrier.txt[]
|
|
--
|
|
|
|
|
|
[[synchronization-image-memory-barriers]]
|
|
=== Image Memory Barriers
|
|
|
|
Image memory barriers only apply to memory accesses involving a specific
|
|
image subresource range.
|
|
That is, a memory dependency formed from an image memory barrier is
|
|
<<synchronization-dependencies-access-scopes, scoped>> to access via the
|
|
specified image subresource range.
|
|
Image memory barriers can: also be used to define
|
|
<<synchronization-image-layout-transitions, image layout transitions>> or a
|
|
<<synchronization-queue-transfers, queue family ownership transfer>> for the
|
|
specified image subresource range.
|
|
|
|
[open,refpage='VkImageMemoryBarrier',desc='Structure specifying the parameters of an image memory barrier',type='structs']
|
|
--
|
|
|
|
The sname:VkImageMemoryBarrier structure is defined as:
|
|
|
|
include::../api/structs/VkImageMemoryBarrier.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:srcAccessMask is a bitmask of elink:VkAccessFlagBits specifying a
|
|
<<synchronization-access-masks, source access mask>>.
|
|
* pname:dstAccessMask is a bitmask of elink:VkAccessFlagBits specifying a
|
|
<<synchronization-access-masks, destination access mask>>.
|
|
* pname:oldLayout is the old layout in an
|
|
<<synchronization-image-layout-transitions, image layout transition>>.
|
|
* pname:newLayout is the new layout in an
|
|
<<synchronization-image-layout-transitions, image layout transition>>.
|
|
* pname:srcQueueFamilyIndex is the source queue family for a
|
|
<<synchronization-queue-transfers, queue family ownership transfer>>.
|
|
* pname:dstQueueFamilyIndex is the destination queue family for a
|
|
<<synchronization-queue-transfers, queue family ownership transfer>>.
|
|
* pname:image is a handle to the image affected by this barrier.
|
|
* pname:subresourceRange describes the <<resources-image-views, image
|
|
subresource range>> within pname:image that is affected by this barrier.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access to memory through the specified image subresource range,
|
|
via access types in the <<synchronization-access-masks, source access mask>>
|
|
specified by pname:srcAccessMask.
|
|
If pname:srcAccessMask includes ename:VK_ACCESS_HOST_WRITE_BIT, memory
|
|
writes performed by that access type are also made visible, as that access
|
|
type is not performed through a resource.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>> is
|
|
limited to access to memory through the specified image subresource range,
|
|
via access types in the <<synchronization-access-masks, destination access
|
|
mask>> specified by pname:dstAccessMask.
|
|
If pname:dstAccessMask includes ename:VK_ACCESS_HOST_WRITE_BIT or
|
|
ename:VK_ACCESS_HOST_READ_BIT, available memory writes are also made visible
|
|
to accesses of those types, as those access types are not performed through
|
|
a resource.
|
|
|
|
If pname:srcQueueFamilyIndex is not equal to pname:dstQueueFamilyIndex, and
|
|
pname:srcQueueFamilyIndex is equal to the current queue family, then the
|
|
memory barrier defines a <<synchronization-queue-transfers-release, queue
|
|
family release operation>> for the specified image subresource range, and
|
|
the second access scope includes no access, as if pname:dstAccessMask was
|
|
`0`.
|
|
|
|
If pname:dstQueueFamilyIndex is not equal to pname:srcQueueFamilyIndex, and
|
|
pname:dstQueueFamilyIndex is equal to the current queue family, then the
|
|
memory barrier defines a <<synchronization-queue-transfers-acquire, queue
|
|
family acquire operation>> for the specified image subresource range, and
|
|
the first access scope includes no access, as if pname:srcAccessMask was
|
|
`0`.
|
|
|
|
If pname:oldLayout is not equal to pname:newLayout, then the memory barrier
|
|
defines an <<synchronization-image-layout-transitions, image layout
|
|
transition>> for the specified image subresource range.
|
|
|
|
[[synchronization-image-barrier-layout-transition-order]]
|
|
Layout transitions that are performed via image memory barriers execute in
|
|
their entirety in <<synchronization-submission-order, submission order>>,
|
|
relative to other image layout transitions submitted to the same queue,
|
|
including those performed by <<renderpass, render passes>>.
|
|
In effect there is an implicit execution dependency from each such layout
|
|
transition to all layout transitions previously submitted to the same queue.
|
|
|
|
ifdef::VK_EXT_sample_locations[]
|
|
|
|
The image layout of each image subresource of a depth/stencil image created
|
|
with ename:VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT is
|
|
dependent on the last sample locations used to render to the image
|
|
subresource as a depth/stencil attachment, thus when the pname:image member
|
|
of an sname:VkImageMemoryBarrier is an image created with this flag the
|
|
application can: chain a slink:VkSampleLocationsInfoEXT structure to the
|
|
pname:pNext chain of sname:VkImageMemoryBarrier to specify the sample
|
|
locations to use during the image layout transition.
|
|
|
|
If the sname:VkSampleLocationsInfoEXT structure in the pname:pNext chain of
|
|
sname:VkImageMemoryBarrier does not match the sample location state last
|
|
used to render to the image subresource range specified by
|
|
pname:subresourceRange or if no sname:VkSampleLocationsInfoEXT structure is
|
|
in the pname:pNext chain of sname:VkImageMemoryBarrier then the contents of
|
|
the given image subresource range becomes undefined as if pname:oldLayout
|
|
would equal ename:VK_IMAGE_LAYOUT_UNDEFINED.
|
|
|
|
endif::VK_EXT_sample_locations[]
|
|
|
|
ifdef::VK_KHR_sampler_ycbcr_conversion[]
|
|
|
|
If pname:image has a multi-planar format and the image is _disjoint_, then
|
|
including ename:VK_IMAGE_ASPECT_COLOR_BIT in the pname:aspectMask member of
|
|
pname:subresourceRange is equivalent to including
|
|
ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR,
|
|
ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR, and (for three-plane formats only)
|
|
ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR.
|
|
|
|
endif::VK_KHR_sampler_ycbcr_conversion[]
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01197]]
|
|
pname:oldLayout must: be ename:VK_IMAGE_LAYOUT_UNDEFINED or the current
|
|
layout of the image subresources affected by the barrier
|
|
* [[VUID-VkImageMemoryBarrier-newLayout-01198]]
|
|
pname:newLayout must: not be ename:VK_IMAGE_LAYOUT_UNDEFINED or
|
|
ename:VK_IMAGE_LAYOUT_PREINITIALIZED
|
|
ifndef::VK_KHR_external_memory[]
|
|
* [[VUID-VkImageMemoryBarrier-image-01199]]
|
|
If pname:image was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_CONCURRENT, pname:srcQueueFamilyIndex and
|
|
pname:dstQueueFamilyIndex must: both be ename:VK_QUEUE_FAMILY_IGNORED
|
|
endif::VK_KHR_external_memory[]
|
|
ifdef::VK_KHR_external_memory[]
|
|
* [[VUID-VkImageMemoryBarrier-image-01381]]
|
|
If pname:image was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_CONCURRENT, at least one of
|
|
pname:srcQueueFamilyIndex and pname:dstQueueFamilyIndex must: be
|
|
ename:VK_QUEUE_FAMILY_IGNORED
|
|
* [[VUID-VkImageMemoryBarrier-image-01382]]
|
|
If pname:image was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_CONCURRENT, and one of pname:srcQueueFamilyIndex
|
|
and pname:dstQueueFamilyIndex is ename:VK_QUEUE_FAMILY_IGNORED, the
|
|
other must: be ename:VK_QUEUE_FAMILY_IGNORED or
|
|
ename:VK_QUEUE_FAMILY_EXTERNAL_KHR
|
|
endif::VK_KHR_external_memory[]
|
|
ifndef::VK_KHR_external_memory[]
|
|
* [[VUID-VkImageMemoryBarrier-image-01200]]
|
|
If pname:image was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE, pname:srcQueueFamilyIndex and
|
|
pname:dstQueueFamilyIndex must: either both be
|
|
ename:VK_QUEUE_FAMILY_IGNORED, or both be a valid queue family (see
|
|
<<devsandqueues-queueprops>>).
|
|
endif::VK_KHR_external_memory[]
|
|
ifdef::VK_KHR_external_memory[]
|
|
* [[VUID-VkImageMemoryBarrier-image-01201]]
|
|
If pname:image was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE and pname:srcQueueFamilyIndex is
|
|
ename:VK_QUEUE_FAMILY_IGNORED, pname:dstQueueFamilyIndex must: also be
|
|
ename:VK_QUEUE_FAMILY_IGNORED.
|
|
* [[VUID-VkImageMemoryBarrier-image-01202]]
|
|
If pname:image was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE and pname:srcQueueFamilyIndex is not
|
|
ename:VK_QUEUE_FAMILY_IGNORED, it must: be a valid queue family or
|
|
ename:VK_QUEUE_FAMILY_EXTERNAL_KHR (see <<devsandqueues-queueprops>>).
|
|
* [[VUID-VkImageMemoryBarrier-image-01203]]
|
|
If pname:image was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE and pname:dstQueueFamilyIndex is not
|
|
ename:VK_QUEUE_FAMILY_IGNORED, it must: be a valid queue family or
|
|
ename:VK_QUEUE_FAMILY_EXTERNAL_KHR (see <<devsandqueues-queueprops>>).
|
|
endif::VK_KHR_external_memory[]
|
|
* [[VUID-VkImageMemoryBarrier-image-01205]]
|
|
If pname:image was created with a sharing mode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE, and pname:srcQueueFamilyIndex and
|
|
pname:dstQueueFamilyIndex are not ename:VK_QUEUE_FAMILY_IGNORED, at
|
|
least one of them must: be the same as the family of the queue that will
|
|
execute this barrier
|
|
* [[VUID-VkImageMemoryBarrier-subresourceRange-01486]]
|
|
pname:subresourceRange.baseMipLevel must: be less than the
|
|
pname:mipLevels specified in slink:VkImageCreateInfo when pname:image
|
|
was created
|
|
* If pname:subresourceRange.levelCount is not
|
|
ename:VK_REMAINING_MIP_LEVELS,
|
|
[eq]#pname:subresourceRange.baseMipLevel {plus}
|
|
pname:subresourceRange.levelCount# must: be less than or equal to the
|
|
pname:mipLevels specified in slink:VkImageCreateInfo when pname:image
|
|
was created
|
|
* [[VUID-VkImageMemoryBarrier-subresourceRange-01488]]
|
|
pname:subresourceRange.baseArrayLayer must: be less than the
|
|
pname:arrayLayers specified in slink:VkImageCreateInfo when pname:image
|
|
was created
|
|
* If pname:subresourceRange.layerCount is not
|
|
ename:VK_REMAINING_ARRAY_LAYERS,
|
|
[eq]#pname:subresourceRange.baseArrayLayer {plus}
|
|
pname:subresourceRange.layerCount# must: be less than or equal to the
|
|
pname:arrayLayers specified in slink:VkImageCreateInfo when pname:image
|
|
was created
|
|
* [[VUID-VkImageMemoryBarrier-image-01207]]
|
|
If pname:image has a depth/stencil format with both depth and stencil
|
|
components, then the pname:aspectMask member of pname:subresourceRange
|
|
must: include both ename:VK_IMAGE_ASPECT_DEPTH_BIT and
|
|
ename:VK_IMAGE_ASPECT_STENCIL_BIT
|
|
ifdef::VK_KHR_sampler_ycbcr_conversion[]
|
|
* [[VUID-VkImageMemoryBarrier-image-01671]]
|
|
If pname:image has a single-plane color format or is not _disjoint_,
|
|
then the pname:aspectMask member of pname:subresourceRange must: be
|
|
ename:VK_IMAGE_ASPECT_COLOR_BIT
|
|
* [[VUID-VkImageMemoryBarrier-image-01672]]
|
|
If pname:image has a multi-planar format and the image is _disjoint_,
|
|
then the pname:aspectMask member of pname:subresourceRange must: include
|
|
either at least one of ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR,
|
|
ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR, and
|
|
ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR; or must: include
|
|
ename:VK_IMAGE_ASPECT_COLOR_BIT
|
|
* [[VUID-VkImageMemoryBarrier-image-01673]]
|
|
If pname:image has a multi-planar format with only two planes, then the
|
|
pname:aspectMask member of pname:subresourceRange must: not include
|
|
ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR
|
|
endif::VK_KHR_sampler_ycbcr_conversion[]
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01208]]
|
|
If either pname:oldLayout or pname:newLayout is
|
|
ename:VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL then pname:image must:
|
|
have been created with ename:VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT set
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01209]]
|
|
If either pname:oldLayout or pname:newLayout is
|
|
ename:VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL then pname:image
|
|
must: have been created with
|
|
ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT set
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01210]]
|
|
If either pname:oldLayout or pname:newLayout is
|
|
ename:VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL then pname:image
|
|
must: have been created with
|
|
ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT set
|
|
ifdef::VK_KHR_maintenance2[]
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01658]]
|
|
If either pname:oldLayout or pname:newLayout is
|
|
ename:VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL_KHR
|
|
then pname:image must: have been created with
|
|
ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT set
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01659]]
|
|
If either pname:oldLayout or pname:newLayout is
|
|
ename:VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL_KHR
|
|
then pname:image must: have been created with
|
|
ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT set
|
|
endif::VK_KHR_maintenance2[]
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01211]]
|
|
If either pname:oldLayout or pname:newLayout is
|
|
ename:VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL then pname:image must:
|
|
have been created with ename:VK_IMAGE_USAGE_SAMPLED_BIT or
|
|
ename:VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT set
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01212]]
|
|
If either pname:oldLayout or pname:newLayout is
|
|
ename:VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL then pname:image must: have
|
|
been created with ename:VK_IMAGE_USAGE_TRANSFER_SRC_BIT set
|
|
* [[VUID-VkImageMemoryBarrier-oldLayout-01213]]
|
|
If either pname:oldLayout or pname:newLayout is
|
|
ename:VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL then pname:image must: have
|
|
been created with ename:VK_IMAGE_USAGE_TRANSFER_DST_BIT set
|
|
****
|
|
|
|
include::../validity/structs/VkImageMemoryBarrier.txt[]
|
|
--
|
|
|
|
|
|
[[synchronization-queue-transfers]]
|
|
=== Queue Family Ownership Transfer
|
|
|
|
Resources created with a elink:VkSharingMode of
|
|
ename:VK_SHARING_MODE_EXCLUSIVE must: have their ownership explicitly
|
|
transferred from one queue family to another in order to access their
|
|
content in a well-defined manner on a queue in a different queue family.
|
|
ifdef::VK_KHR_external_memory[]
|
|
Resources shared with external APIs or instances using external memory must:
|
|
also explicitly manage ownership transfers between local and external queues
|
|
(or equivalent constructs in external APIs) regardless of the
|
|
elink:VkSharingMode specified when creating them.
|
|
The special queue family index ename:VK_QUEUE_FAMILY_EXTERNAL_KHR represents
|
|
any queue external to the resource's current Vulkan instance.
|
|
endif::VK_KHR_external_memory[]
|
|
If memory dependencies are correctly expressed between uses of such a
|
|
resource between two queues in different families, but no ownership transfer
|
|
is defined, the contents of that resource are undefined for any read
|
|
accesses performed by the second queue family.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
If an application does not need the contents of a resource to remain valid
|
|
when transferring from one queue family to another, then the ownership
|
|
transfer should: be skipped.
|
|
====
|
|
|
|
A queue family ownership transfer consists of two distinct parts:
|
|
|
|
. Release exclusive ownership from the source queue family
|
|
. Acquire exclusive ownership for the destination queue family
|
|
|
|
An application must: ensure that these operations occur in the correct order
|
|
by defining an execution dependency between them, e.g. using a semaphore.
|
|
|
|
[[synchronization-queue-transfers-release]] A _release operation_ is used to
|
|
release exclusive ownership of a range of a buffer or image subresource
|
|
range.
|
|
A release operation is defined by executing a
|
|
<<synchronization-buffer-memory-barriers, buffer memory barrier>> (for a
|
|
buffer range) or an <<synchronization-image-memory-barriers, image memory
|
|
barrier>> (for an image subresource range), on a queue from the source queue
|
|
family.
|
|
The pname:srcQueueFamilyIndex parameter of the barrier must: be set to the
|
|
source queue family index, and the pname:dstQueueFamilyIndex parameter to
|
|
the destination queue family index.
|
|
pname:dstStageMask is ignored for such a barrier, such that no visibility
|
|
operation is executed - the value of this mask does not affect the validity
|
|
of the barrier.
|
|
The release operation happens-after the availability operation.
|
|
|
|
[[synchronization-queue-transfers-acquire]] An _acquire operation_ is used
|
|
to acquire exclusive ownership of a range of a buffer or image subresource
|
|
range.
|
|
An acquire operation is defined by executing a
|
|
<<synchronization-buffer-memory-barriers, buffer memory barrier>> (for a
|
|
buffer range) or an <<synchronization-image-memory-barriers, image memory
|
|
barrier>> (for an image subresource range), on a queue from the destination
|
|
queue family.
|
|
The pname:srcQueueFamilyIndex parameter of the barrier must: be set to the
|
|
source queue family index, and the pname:dstQueueFamilyIndex parameter to
|
|
the destination queue family index.
|
|
pname:srcStageMask is ignored for such a barrier, such that no availability
|
|
operation is executed - the value of this mask does not affect the validity
|
|
of the barrier.
|
|
The acquire operation happens-before the visibility operation.
|
|
|
|
.Note
|
|
[NOTE]
|
|
====
|
|
Whilst it is not invalid to provide destination or source access masks for
|
|
memory barriers used for release or acquire operations, respectively, they
|
|
have no practical effect.
|
|
Access after a release operation has undefined results, and so visibility
|
|
for those accesses has no practical effect.
|
|
Similarly, write access before an acquire operation will produce undefined
|
|
results for future access, so availability of those writes has no practical
|
|
use.
|
|
In an earlier version of the specification, these were required to match on
|
|
both sides - but this was subsequently relaxed.
|
|
These masks should: be set to 0.
|
|
====
|
|
|
|
If the transfer is via an image memory barrier, and an
|
|
<<synchronization-image-layout-transitions, image layout transition>> is
|
|
desired, then the values of pname:oldLayout and pname:newLayout in the
|
|
release memory barrier must: be equal to values of pname:oldLayout and
|
|
pname:newLayout in the acquire memory barrier.
|
|
Although the image layout transition is submitted twice, it will only be
|
|
executed once.
|
|
A layout transition specified in this way happens-after the release
|
|
operation and happens-before the acquire operation.
|
|
|
|
If the values of pname:srcQueueFamilyIndex and pname:dstQueueFamilyIndex are
|
|
equal, no ownership transfer is performed, and the barrier operates as if
|
|
they were both set to ename:VK_QUEUE_FAMILY_IGNORED.
|
|
|
|
Queue family ownership transfers may: perform read and write accesses on all
|
|
memory bound to the image subresource or buffer range, so applications must:
|
|
ensure that all memory writes have been made
|
|
<<synchronization-dependencies-available-and-visible, available>> before a
|
|
queue family ownership transfer is executed.
|
|
Available memory is automatically made visible to queue family release and
|
|
acquire operations, and writes performed by those operations are
|
|
automatically made available.
|
|
|
|
Once a queue family has acquired ownership of a buffer range or image
|
|
subresource range of an ename:VK_SHARING_MODE_EXCLUSIVE resource, its
|
|
contents are undefined to other queue families unless ownership is
|
|
transferred.
|
|
The contents of any portion of another resource which aliases memory that is
|
|
bound to the transferred buffer or image subresource range are undefined
|
|
after a release or acquire operation.
|
|
|
|
|
|
[[synchronization-wait-idle]]
|
|
== Wait Idle Operations
|
|
|
|
[open,refpage='vkQueueWaitIdle',desc='Wait for a queue to become idle',type='protos']
|
|
--
|
|
|
|
To wait on the host for the completion of outstanding queue operations for a
|
|
given queue, call:
|
|
|
|
include::../api/protos/vkQueueWaitIdle.txt[]
|
|
|
|
* pname:queue is the queue on which to wait.
|
|
|
|
fname:vkQueueWaitIdle is equivalent to submitting a fence to a queue and
|
|
waiting with an infinite timeout for that fence to signal.
|
|
|
|
include::../validity/protos/vkQueueWaitIdle.txt[]
|
|
--
|
|
|
|
[open,refpage='vkDeviceWaitIdle',desc='Wait for a device to become idle',type='protos']
|
|
--
|
|
|
|
To wait on the host for the completion of outstanding queue operations for
|
|
all queues on a given logical device, call:
|
|
|
|
include::../api/protos/vkDeviceWaitIdle.txt[]
|
|
|
|
* pname:device is the logical device to idle.
|
|
|
|
fname:vkDeviceWaitIdle is equivalent to calling fname:vkQueueWaitIdle for
|
|
all queues owned by pname:device.
|
|
|
|
include::../validity/protos/vkDeviceWaitIdle.txt[]
|
|
--
|
|
|
|
|
|
[[synchronization-submission-host-writes]]
|
|
== Host Write Ordering Guarantees
|
|
|
|
When batches of command buffers are submitted to a queue via
|
|
flink:vkQueueSubmit, it defines a memory dependency with prior host
|
|
operations, and execution of command buffers submitted to the queue.
|
|
|
|
The first <<synchronization-dependencies-scopes, synchronization scope>> is
|
|
defined by the host execution model, but includes execution of
|
|
flink:vkQueueSubmit on the host and anything that happened-before it.
|
|
|
|
The second <<synchronization-dependencies-scopes, synchronization scope>>
|
|
includes every command submitted in the same <<devsandqueues-submission,
|
|
queue submission>> command, and all future submissions to the same queue.
|
|
|
|
The first <<synchronization-dependencies-access-scopes, access scope>>
|
|
includes all host writes to mappable device memory that are either coherent,
|
|
or have been flushed with flink:vkFlushMappedMemoryRanges.
|
|
|
|
The second <<synchronization-dependencies-access-scopes, access scope>>
|
|
includes all memory access performed by the device.
|
|
|
|
|
|
ifdef::VK_KHX_device_group[]
|
|
|
|
[[synchronization-device-group]]
|
|
== Synchronization and Multiple Physical Devices
|
|
|
|
If a logical device includes more than one physical device, then fences,
|
|
semaphores, and events all still have a single instance of the signaled
|
|
state.
|
|
|
|
A fence becomes signaled when all physical devices complete the necessary
|
|
queue operations.
|
|
|
|
Semaphore wait and signal operations all include a device index that is the
|
|
sole physical device that performs the operation.
|
|
These indices are provided in the slink:VkDeviceGroupSubmitInfoKHX and
|
|
slink:VkDeviceGroupBindSparseInfoKHX structures.
|
|
Semaphores are not exclusively owned by any physical device.
|
|
For example, a semaphore can be signaled by one physical device and then
|
|
waited on by a different physical device.
|
|
|
|
An event can: only be waited on by the same physical device that signaled it
|
|
(or the host).
|
|
|
|
endif::VK_KHX_device_group[]
|