status-im
/
Vulkan-Docs
mirror of https://github.com/status-im/Vulkan-Docs.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
Vulkan-Docs/chapters/primsrast.txt

1417 lines
61 KiB
Plaintext
Raw Blame History

// Copyright (c) 2015-2018 Khronos Group. This work is licensed under a
// Creative Commons Attribution 4.0 International License; see
// http://creativecommons.org/licenses/by/4.0/
[[primsrast]]
= Rasterization
Rasterization is the process by which a primitive is converted to a
two-dimensional image.
Each point of this image contains associated data such as depth, color, or
other attributes.
Rasterizing a primitive begins by determining which squares of an integer
grid in framebuffer coordinates are occupied by the primitive, and assigning
one or more depth values to each such square.
This process is described below for points, lines, and polygons.
A grid square, including its [eq]#(x,y)# framebuffer coordinates, [eq]#z#
(depth), and associated data added by fragment shaders, is called a
fragment.
A fragment is located by its upper left corner, which lies on integer grid
coordinates.
Rasterization operations also refer to a fragment's sample locations, which
are offset by subpixel fractional values from its upper left corner.
The rasterization rules for points, lines, and triangles involve testing
whether each sample location is inside the primitive.
Fragments need not actually be square, and rasterization rules are not
affected by the aspect ratio of fragments.
Display of non-square grids, however, will cause rasterized points and line
segments to appear fatter in one direction than the other.
We assume that fragments are square, since it simplifies antialiasing and
texturing.
After rasterization, fragments are processed by the <<fragops-early,early
per-fragment tests>>, if enabled.
Several factors affect rasterization, including the members of
sname:VkPipelineRasterizationStateCreateInfo and
sname:VkPipelineMultisampleStateCreateInfo.
[open,refpage='VkPipelineRasterizationStateCreateInfo',desc='Structure specifying parameters of a newly created pipeline rasterization state',type='structs']
--
The sname:VkPipelineRasterizationStateCreateInfo structure is defined as:
include::../api/structs/VkPipelineRasterizationStateCreateInfo.txt[]
* pname:sType is the type of this structure.
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
* pname:flags is reserved for future use.
* pname:depthClampEnable controls whether to clamp the fragment's depth
values instead of clipping primitives to the z planes of the frustum, as
described in <<vertexpostproc-clipping,Primitive Clipping>>.
* pname:rasterizerDiscardEnable controls whether primitives are discarded
immediately before the rasterization stage.
* pname:polygonMode is the triangle rendering mode.
See elink:VkPolygonMode.
* pname:cullMode is the triangle facing direction used for primitive
culling.
See elink:VkCullModeFlagBits.
* pname:frontFace is a elink:VkFrontFace value specifying the front-facing
triangle orientation to be used for culling.
* pname:depthBiasEnable controls whether to bias fragment depth values.
* pname:depthBiasConstantFactor is a scalar factor controlling the
constant depth value added to each fragment.
* pname:depthBiasClamp is the maximum (or minimum) depth bias of a
fragment.
* pname:depthBiasSlopeFactor is a scalar factor applied to a fragment's
slope in depth bias calculations.
* pname:lineWidth is the width of rasterized line segments.
ifdef::VK_AMD_rasterization_order[]
The application can: also add a
sname:VkPipelineRasterizationStateRasterizationOrderAMD structure to the
pname:pNext chain of a sname:VkPipelineRasterizationStateCreateInfo
structure.
This structure enables selecting the rasterization order to use when
rendering with the corresponding graphics pipeline as described in
<<primrast-order, Rasterization Order>>.
endif::VK_AMD_rasterization_order[]
.Valid Usage
****
* [[VUID-VkPipelineRasterizationStateCreateInfo-depthClampEnable-00782]]
If the <<features-features-depthClamp,depth clamping>> feature is not
enabled, pname:depthClampEnable must: be ename:VK_FALSE
ifndef::VK_NV_fill_rectangle[]
* [[VUID-VkPipelineRasterizationStateCreateInfo-polygonMode-01413]]
If the <<features-features-fillModeNonSolid,non-solid fill modes>>
feature is not enabled, pname:polygonMode must: be
ename:VK_POLYGON_MODE_FILL
endif::VK_NV_fill_rectangle[]
ifdef::VK_NV_fill_rectangle[]
* [[VUID-VkPipelineRasterizationStateCreateInfo-polygonMode-01507]]
If the <<features-features-fillModeNonSolid,non-solid fill modes>>
feature is not enabled, pname:polygonMode must: be
ename:VK_POLYGON_MODE_FILL or ename:VK_POLYGON_MODE_FILL_RECTANGLE_NV
* [[VUID-VkPipelineRasterizationStateCreateInfo-polygonMode-01414]]
If the `<<VK_NV_fill_rectangle>>` extension is not enabled,
pname:polygonMode must: not be ename:VK_POLYGON_MODE_FILL_RECTANGLE_NV
endif::VK_NV_fill_rectangle[]
****
include::../validity/structs/VkPipelineRasterizationStateCreateInfo.txt[]
--
[open,refpage='VkPipelineRasterizationStateCreateFlags',desc='Reserved for future use',type='enums']
--
include::../api/flags/VkPipelineRasterizationStateCreateFlags.txt[]
sname:VkPipelineRasterizationStateCreateFlags is a bitmask type for setting
a mask, but is currently reserved for future use.
--
[open,refpage='VkPipelineMultisampleStateCreateInfo',desc='Structure specifying parameters of a newly created pipeline multisample state',type='structs']
--
The sname:VkPipelineMultisampleStateCreateInfo structure is defined as:
include::../api/structs/VkPipelineMultisampleStateCreateInfo.txt[]
* pname:sType is the type of this structure.
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
* pname:flags is reserved for future use.
* pname:rasterizationSamples is a elink:VkSampleCountFlagBits specifying
the number of samples per pixel used in rasterization.
* pname:sampleShadingEnable can: be used to enable
<<primsrast-sampleshading,Sample Shading>>.
* pname:minSampleShading specifies a minimum fraction of sample shading if
pname:sampleShadingEnable is set to ename:VK_TRUE.
* pname:pSampleMask is a bitmask of static coverage information that is
ANDed with the coverage information generated during rasterization, as
described in <<fragops-samplemask,Sample Mask>>.
* pname:alphaToCoverageEnable controls whether a temporary coverage value
is generated based on the alpha component of the fragment's first color
output as specified in the <<fragops-covg,Multisample Coverage>>
section.
* pname:alphaToOneEnable controls whether the alpha component of the
fragment's first color output is replaced with one as described in
<<fragops-covg,Multisample Coverage>>.
.Valid Usage
****
* [[VUID-VkPipelineMultisampleStateCreateInfo-sampleShadingEnable-00784]]
If the <<features-features-sampleRateShading,sample rate shading>>
feature is not enabled, pname:sampleShadingEnable must: be
ename:VK_FALSE
* [[VUID-VkPipelineMultisampleStateCreateInfo-alphaToOneEnable-00785]]
If the <<features-features-alphaToOne,alpha to one>> feature is not
enabled, pname:alphaToOneEnable must: be ename:VK_FALSE
* [[VUID-VkPipelineMultisampleStateCreateInfo-minSampleShading-00786]]
pname:minSampleShading must: be in the range [eq]#[0,1]#
ifdef::VK_NV_framebuffer_mixed_samples[]
* [[VUID-VkPipelineMultisampleStateCreateInfo-rasterizationSamples-01415]]
If the subpass has any color attachments and pname:rasterizationSamples
is greater than the number of color samples, then
pname:sampleShadingEnable must: be ename:VK_FALSE
endif::VK_NV_framebuffer_mixed_samples[]
****
include::../validity/structs/VkPipelineMultisampleStateCreateInfo.txt[]
--
[open,refpage='VkPipelineMultisampleStateCreateFlags',desc='Reserved for future use',type='enums']
--
include::../api/flags/VkPipelineMultisampleStateCreateFlags.txt[]
sname:VkPipelineMultisampleStateCreateFlags is a bitmask type for setting a
mask, but is currently reserved for future use.
--
Rasterization only produces fragments corresponding to pixels in the
framebuffer.
Fragments which would be produced by application of any of the primitive
rasterization rules described below but which lie outside the framebuffer
are not produced, nor are they processed by any later stage of the pipeline,
including any of the early per-fragment tests described in
<<fragops-early,Early Per-Fragment Tests>>.
Surviving fragments are processed by fragment shaders.
Fragment shaders determine associated data for fragments, and can: also
modify or replace their assigned depth values.
ifndef::VK_AMD_mixed_attachment_samples[]
ifndef::VK_NV_framebuffer_mixed_samples[]
If the subpass for which this pipeline is being created uses color and/or
depth/stencil attachments, then pname:rasterizationSamples must: be the same
as the sample count for those subpass attachments.
endif::VK_NV_framebuffer_mixed_samples[]
endif::VK_AMD_mixed_attachment_samples[]
ifdef::VK_AMD_mixed_attachment_samples[]
If the subpass for which this pipeline is being created uses color and/or
depth/stencil attachments, then pname:rasterizationSamples must: be the same
as the maximum of the sample counts of those subpass attachments.
endif::VK_AMD_mixed_attachment_samples[]
If the subpass for which this pipeline is being created does not use color
or depth/stencil attachments, pname:rasterizationSamples must: follow the
rules for a <<renderpass-noattachments, zero-attachment subpass>>.
[[primsrast-discard]]
== Discarding Primitives Before Rasterization
Primitives are discarded before rasterization if the
pname:rasterizerDiscardEnable member of
slink:VkPipelineRasterizationStateCreateInfo is enabled.
When enabled, primitives are discarded after they are processed by the last
active shader stage in the pipeline before rasterization.
[[primrast-order]]
== Rasterization Order
Within a subpass of a <<renderpass,render pass instance>>, for a given
(x,y,layer,sample) sample location, the following operations are guaranteed
to execute in _rasterization order_, for each separate primitive that
includes that sample location:
. <<fragops-scissor,Scissor test>>
. <<fragops-samplemask,Sample mask generation>>
. <<fragops-dbt,Depth bounds test>>
. <<fragops-stencil, Stencil test, stencil op and stencil write>>
. <<fragops-depth, Depth test and depth write>>
. <<fragops-samplecount,Sample counting>> for
<<queries-occlusion,occlusion queries>>
ifdef::VK_NV_fragment_coverage_to_color[]
. <<fragops-coverage-to-color,Fragment Coverage To Color>>
endif::VK_NV_fragment_coverage_to_color[]
. <<fragops-coverage-reduction,coverage reduction>>
. <<framebuffer-blending, Blending>>, <<framebuffer-logicop, logic
operations>>, and color writes
Each of these operations is atomically executed for each primitive and
sample location.
Execution of these operations for each primitive in a subpass occurs in
ifndef::VK_AMD_rasterization_order[]
<<drawing-primitive-order, primitive order>>.
endif::VK_AMD_rasterization_order[]
ifdef::VK_AMD_rasterization_order[]
an order determined by the application.
[open,refpage='VkPipelineRasterizationStateRasterizationOrderAMD',desc='Structure defining rasterization order for a graphics pipeline',type='structs']
--
The rasterization order to use for a graphics pipeline is specified by
adding a sname:VkPipelineRasterizationStateRasterizationOrderAMD structure
to the pname:pNext chain of a slink:VkPipelineRasterizationStateCreateInfo
structure.
The sname:VkPipelineRasterizationStateRasterizationOrderAMD structure is
defined as:
include::../api/structs/VkPipelineRasterizationStateRasterizationOrderAMD.txt[]
* pname:sType is the type of this structure.
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
* pname:rasterizationOrder is a elink:VkRasterizationOrderAMD value
specifying the primitive rasterization order to use.
include::../validity/structs/VkPipelineRasterizationStateRasterizationOrderAMD.txt[]
If the `<<VK_AMD_rasterization_order>>` device extension is not enabled or
the application does not request a particular rasterization order through
specifying a sname:VkPipelineRasterizationStateRasterizationOrderAMD
structure then the rasterization order used by the graphics pipeline
defaults to ename:VK_RASTERIZATION_ORDER_STRICT_AMD.
--
[open,refpage='VkRasterizationOrderAMD',desc='Specify rasterization order for a graphics pipeline',type='enums']
--
Possible values of
slink:VkPipelineRasterizationStateRasterizationOrderAMD::pname:rasterizationOrder,
specifying the primitive rasterization order, are:
include::../api/enums/VkRasterizationOrderAMD.txt[]
* ename:VK_RASTERIZATION_ORDER_STRICT_AMD specifies that operations for
each primitive in a subpass must: occur in <<drawing-primitive-order,
primitive order>>.
* ename:VK_RASTERIZATION_ORDER_RELAXED_AMD specifies that operations for
each primitive in a subpass may: not occur in <<drawing-primitive-order,
primitive order>>.
--
endif::VK_AMD_rasterization_order[]
[[primsrast-multisampling]]
== Multisampling
Multisampling is a mechanism to antialias all Vulkan primitives: points,
lines, and polygons.
The technique is to sample all primitives multiple times at each pixel.
Each sample in each framebuffer attachment has storage for a color, depth,
and/or stencil value, such that per-fragment operations apply to each sample
independently.
The color sample values can: be later _resolved_ to a single color (see
<<copies-resolve,Resolving Multisample Images>> and the <<renderpass,Render
Pass>> chapter for more details on how to resolve multisample images to
non-multisample images).
Vulkan defines rasterization rules for single-sample modes in a way that is
equivalent to a multisample mode with a single sample in the center of each
pixel.
Each fragment includes a coverage value with pname:rasterizationSamples bits
(see <<fragops-samplemask,Sample Mask>>).
Each fragment includes pname:rasterizationSamples depth values and sets of
associated data.
An implementation may: choose to assign the same associated data to more
than one sample.
The location for evaluating such associated data may: be anywhere within the
pixel including the pixel center or any of the sample locations.
When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel
center must: be used.
The different associated data values need not all be evaluated at the same
location.
Each pixel fragment thus consists of integer x and y grid coordinates,
pname:rasterizationSamples depth values and sets of associated data, and a
coverage value with pname:rasterizationSamples bits.
It is understood that each pixel has pname:rasterizationSamples locations
associated with it.
These locations are exact positions, rather than regions or areas, and each
is referred to as a sample point.
The sample points associated with a pixel must: be located inside or on the
boundary of the unit square that is considered to bound the pixel.
Furthermore, the relative locations of sample points may: be identical for
each pixel in the framebuffer, or they may: differ.
If the current pipeline includes a fragment shader with one or more
variables in its interface decorated with code:Sample and code:Input, the
data associated with those variables will be assigned independently for each
sample.
The values for each sample must: be evaluated at the location of the sample.
The data associated with any other variables not decorated with code:Sample
and code:Input need not be evaluated independently for each sample.
If the pname:standardSampleLocations member of slink:VkPhysicalDeviceLimits
is ename:VK_TRUE, then the sample counts ename:VK_SAMPLE_COUNT_1_BIT,
ename:VK_SAMPLE_COUNT_2_BIT, ename:VK_SAMPLE_COUNT_4_BIT,
ename:VK_SAMPLE_COUNT_8_BIT, and ename:VK_SAMPLE_COUNT_16_BIT have sample
locations as listed in the following table, with the [eq]##i##th entry in
the table corresponding to bit [eq]#i# in the sample masks.
ename:VK_SAMPLE_COUNT_32_BIT and ename:VK_SAMPLE_COUNT_64_BIT do not have
standard sample locations.
Locations are defined relative to an origin in the upper left corner of the
pixel.
<<<
.Standard sample locations
[align="center"]
|====
|ename:VK_SAMPLE_COUNT_1_BIT|ename:VK_SAMPLE_COUNT_2_BIT|ename:VK_SAMPLE_COUNT_4_BIT|ename:VK_SAMPLE_COUNT_8_BIT|ename:VK_SAMPLE_COUNT_16_BIT
|
[eq]#(0.5,0.5)#
|
[eq]#(0.75,0.75)# +
[eq]#(0.25,0.25)#
|
[eq]#(0.375, 0.125)# +
[eq]#(0.875, 0.375)# +
[eq]#(0.125, 0.625)# +
[eq]#(0.625, 0.875)#
|
[eq]#(0.5625, 0.3125)# +
[eq]#(0.4375, 0.6875)# +
[eq]#(0.8125, 0.5625)# +
[eq]#(0.3125, 0.1875)# +
[eq]#(0.1875, 0.8125)# +
[eq]#(0.0625, 0.4375)# +
[eq]#(0.6875, 0.9375)# +
[eq]#(0.9375, 0.0625)#
|
[eq]#(0.5625, 0.5625)# +
[eq]#(0.4375, 0.3125)# +
[eq]#(0.3125, 0.625)# +
[eq]#(0.75, 0.4375)# +
[eq]#(0.1875, 0.375)# +
[eq]#(0.625, 0.8125)# +
[eq]#(0.8125, 0.6875)# +
[eq]#(0.6875, 0.1875)# +
[eq]#(0.375, 0.875)# +
[eq]#(0.5, 0.0625)# +
[eq]#(0.25, 0.125)# +
[eq]#(0.125, 0.75)# +
[eq]#(0.0, 0.5)# +
[eq]#(0.9375, 0.25)# +
[eq]#(0.875, 0.9375)# +
[eq]#(0.0625, 0.0)#
|image:images/sample_count_1.svg[align="center"]
|image:images/sample_count_2.svg[align="center"]
|image:images/sample_count_4.svg[align="center"]
|image:images/sample_count_8.svg[align="center"]
|image:images/sample_count_16.svg[align="center"]
|====
ifdef::VK_AMD_shader_fragment_mask[]
Color images created with multiple samples per pixel use a compression
technique where there are two arrays of data associated with each pixel.
The first array contains one element per sample where each element stores an
index to the second array defining the _fragment mask_ of the pixel.
The second array contains one element per _color fragment_ and each element
stores a unique color value in the format of the image.
With this compression technique it's not always necessary to actually use
unique storage locations for each color sample: when multiple samples share
the same color value the fragment mask may: have two samples referring to
the same color fragment.
The number of color fragments is determined by the pname:samples member of
the slink:VkImageCreateInfo structure used to create the image.
The `<<VK_AMD_shader_fragment_mask>>` device extension provides shader
instructions enabling the application to get direct access to the fragment
mask and the individual color fragment values.
[[vk-amd-shader-fragment-mask-diagram]]
[%inline]
image::images/fragment_mask.svg[align="center",title="Fragment Mask",align="center"]
endif::VK_AMD_shader_fragment_mask[]
ifdef::VK_EXT_sample_locations[]
[[primrast-samplelocations]]
== Custom Sample Locations
[open,refpage='VkPipelineSampleLocationsStateCreateInfoEXT',desc='Structure specifying sample locations for a pipeline',type='structs']
--
Applications can: also control the sample locations used for rasterization.
If the pname:pNext chain of the slink:VkPipelineMultisampleStateCreateInfo
structure specified at pipeline creation time includes an instance of the
sname:VkPipelineSampleLocationsStateCreateInfoEXT structure, then that
structure controls the sample locations used when rasterizing primitives
with the pipeline.
The sname:VkPipelineSampleLocationsStateCreateInfoEXT structure is defined
as:
include::../api/structs/VkPipelineSampleLocationsStateCreateInfoEXT.txt[]
* pname:sType is the type of this structure.
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
* pname:sampleLocationsEnable controls whether custom sample locations are
used.
If pname:sampleLocationsEnable is ename:VK_FALSE, the default sample
locations are used and the values specified in pname:sampleLocationsInfo
are ignored.
* pname:sampleLocationsInfo is the sample locations to use during
rasterization if pname:sampleLocationsEnable is ename:VK_TRUE and the
graphics pipeline is not created with
ename:VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT.
include::../validity/structs/VkPipelineSampleLocationsStateCreateInfoEXT.txt[]
--
[open,refpage='VkSampleLocationsInfoEXT',desc='Structure specifying a set of sample locations',type='structs']
--
The sname:VkSampleLocationsInfoEXT structure is defined as:
include::../api/structs/VkSampleLocationsInfoEXT.txt[]
* pname:sType is the type of this structure.
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
* pname:sampleLocationsPerPixel is a elink:VkSampleCountFlagBits
specifying the number of sample locations per pixel.
* pname:sampleLocationGridSize is the size of the sample location grid to
select custom sample locations for.
* pname:sampleLocationsCount is the number of sample locations in
pname:pSampleLocations.
* pname:pSampleLocations is an array of pname:sampleLocationsCount
slink:VkSampleLocationEXT structures.
This structure can: be used either to specify the sample locations to be
used for rendering or to specify the set of sample locations an image
subresource has been last rendered with for the purposes of layout
transitions of depth/stencil images created with
ename:VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT.
The sample locations in pname:pSampleLocations specify
pname:sampleLocationsPerPixel number of sample locations for each pixel in
the grid of the size specified in pname:sampleLocationGridSize.
The sample location for sample [eq]#i# at the pixel grid location
[eq]#(x,y)# is taken from [eq]#pname:pSampleLocations[(x + y *
pname:sampleLocationGridSize.width)
* pname:sampleLocationsPerPixel + i]#.
.Valid Usage
****
* [[VUID-VkSampleLocationsInfoEXT-sampleLocationsPerPixel-01526]]
pname:sampleLocationsPerPixel must: be a bit value that is set in
slink:VkPhysicalDeviceSampleLocationsPropertiesEXT::pname:sampleLocationSampleCounts
* [[VUID-VkSampleLocationsInfoEXT-sampleLocationsCount-01527]]
pname:sampleLocationsCount must: equal
[eq]#pname:sampleLocationsPerPixel {times}
pname:sampleLocationGridSize.width {times}
pname:sampleLocationGridSize.height#
****
include::../validity/structs/VkSampleLocationsInfoEXT.txt[]
--
[open,refpage='VkSampleLocationEXT',desc='Structure specifying the coordinates of a sample location',type='structs']
--
The sname:VkSampleLocationEXT structure is defined as:
include::../api/structs/VkSampleLocationEXT.txt[]
* pname:x is the horizontal coordinate of the sample's location.
* pname:y is the vertical coordinate of the sample's location.
The domain space of the sample location coordinates has an upper-left origin
within the pixel in framebuffer space.
The values specified in a sname:VkSampleLocationEXT structure are always
clamped to the implementation-dependent sample location coordinate range
[eq]#[pname:sampleLocationCoordinateRange[0],pname:sampleLocationCoordinateRange[1]]#
that can: be queried by chaining the
slink:VkPhysicalDeviceSampleLocationsPropertiesEXT structure to the
pname:pNext chain of slink:VkPhysicalDeviceProperties2.
include::../validity/structs/VkSampleLocationEXT.txt[]
--
[open,refpage='vkCmdSetSampleLocationsEXT',desc='Set the dynamic sample locations state',type='protos']
--
The custom sample locations used for rasterization when
sname:VkPipelineSampleLocationsStateCreateInfoEXT::pname:sampleLocationsEnable
is ename:VK_TRUE are specified by the
sname:VkPipelineSampleLocationsStateCreateInfoEXT::pname:sampleLocationsInfo
property of the bound graphics pipeline, if the pipeline was not created
with ename:VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT enabled.
Otherwise, the sample locations used for rasterization are set by calling
fname:vkCmdSetSampleLocationsEXT:
include::../api/protos/vkCmdSetSampleLocationsEXT.txt[]
* pname:commandBuffer is the command buffer into which the command will be
recorded.
* pname:pSampleLocationsInfo is the sample locations state to set.
.Valid Usage
****
* [[VUID-vkCmdSetSampleLocationsEXT-None-01528]]
The bound graphics pipeline must: have been created with the
ename:VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT dynamic state enabled
* [[VUID-vkCmdSetSampleLocationsEXT-sampleLocationsPerPixel-01529]]
The pname:sampleLocationsPerPixel member of pname:pSampleLocationsInfo
must: equal the pname:rasterizationSamples member of the
slink:VkPipelineMultisampleStateCreateInfo structure the bound graphics
pipeline has been created with
* [[VUID-vkCmdSetSampleLocationsEXT-variableSampleLocations-01530]]
If
slink:VkPhysicalDeviceSampleLocationsPropertiesEXT::pname:variableSampleLocations
is ename:VK_FALSE then the current render pass must: have been begun by
specifying a slink:VkRenderPassSampleLocationsBeginInfoEXT structure
whose pname:pPostSubpassSampleLocations member contains an element with
a pname:subpassIndex matching the current subpass index and the
pname:sampleLocationsInfo member of that element must: match the sample
locations state pointed to by pname:pSampleLocationsInfo
****
include::../validity/protos/vkCmdSetSampleLocationsEXT.txt[]
--
endif::VK_EXT_sample_locations[]
[[primsrast-sampleshading]]
== Sample Shading
Sample shading can: be used to specify a minimum number of unique samples to
process for each fragment.
If sample shading is enabled an implementation must: provide a minimum of
[eq]#max({lceil} pname:minSampleShadingFactor {times} pname:totalSamples
{rceil}, 1)# unique associated data for each fragment, where
pname:minSampleShadingFactor is the minimum fraction of sample shading and
pname:totalSamples is
ifdef::VK_AMD_mixed_attachment_samples[]
the number of samples of the color attachments used in the subpass or, if
the subpass does not use any color attachments,
endif::VK_AMD_mixed_attachment_samples[]
the value of
slink:VkPipelineMultisampleStateCreateInfo::pname:rasterizationSamples
specified at pipeline creation time.
These are associated with the samples in an implementation-dependent manner.
When pname:minSampleShadingFactor is `1.0`, a separate set of associated
data are evaluated for each sample, and each set of values is evaluated at
the sample location.
Sample shading is enabled for a graphics pipeline:
* If the interface of the fragment shader entry point of the graphics
pipeline includes an input variable decorated with code:SampleId or
code:SamplePosition.
In this case pname:minSampleShadingFactor takes the value `1.0`.
* Else if the pname:sampleShadingEnable member of the
slink:VkPipelineMultisampleStateCreateInfo structure specified when
creating the graphics pipeline is set to ename:VK_TRUE.
In this case pname:minSampleShadingFactor takes the value of
slink:VkPipelineMultisampleStateCreateInfo::pname:minSampleShading.
Otherwise, sample shading is considered disabled.
[[primsrast-points]]
== Points
A point is drawn by generating a set of fragments in the shape of a square
centered around the vertex of the point.
Each vertex has an associated point size that controls the width/height of
that square.
The point size is taken from the (potentially clipped) shader built-in
code:PointSize written by:
* the geometry shader, if active;
* the tessellation evaluation shader, if active and no geometry shader is
active;
* the vertex shader, otherwise
and clamped to the implementation-dependent point size range
[eq]#[pname:pointSizeRange[0],pname:pointSizeRange[1]]#.
If the value written to code:PointSize is less than or equal to zero, or if
no value was written to code:PointSize, results are undefined.
Not all point sizes need be supported, but the size 1.0 must: be supported.
The range of supported sizes and the size of evenly-spaced gradations within
that range are implementation-dependent.
The range and gradations are obtained from the pname:pointSizeRange and
pname:pointSizeGranularity members of slink:VkPhysicalDeviceLimits.
If, for instance, the size range is from 0.1 to 2.0 and the gradation size
is 0.1, then the size 0.1, 0.2, ..., 1.9, 2.0 are supported.
Additional point sizes may: also be supported.
There is no requirement that these sizes be equally spaced.
If an unsupported size is requested, the nearest supported size is used
instead.
[[primsrast-points-basic]]
=== Basic Point Rasterization
Point rasterization produces a fragment for each framebuffer pixel with one
or more sample points that intersect a region centered at the point's
[eq]#(x~f~,y~f~)#.
This region is a square with side equal to the current point size.
Coverage bits that correspond to sample points that intersect the region are
1, other coverage bits are 0.
All fragments produced in rasterizing a point are assigned the same
associated data, which are those of the vertex corresponding to the point.
However, the fragment shader built-in code:PointCoord contains point sprite
texture coordinates.
The [eq]#s# and [eq]#t# point sprite texture coordinates vary from zero to
one across the point horizontally left-to-right and top-to-bottom,
respectively.
The following formulas are used to evaluate [eq]#s# and [eq]#t#:
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
s = {1 \over 2} + { \left( x_p - x_f \right) \over \text{size} }
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
t = {1 \over 2} + { \left( y_p - y_f \right) \over \text{size} }
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
where size is the point's size, [eq]#(x~p~,y~p~)# is the location at which
the point sprite coordinates are evaluated - this may: be the framebuffer
coordinates of the pixel center (i.e. at the half-integer) or the location
of a sample, and [eq]#(x~f~,y~f~)# is the exact, unrounded framebuffer
coordinate of the vertex for the point.
When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel
center must: be used.
[[primsrast-lines]]
== Line Segments
A line is drawn by generating a set of fragments overlapping a rectangle
centered on the line segment.
Each line segment has an associated width that controls the width of that
rectangle.
[open,refpage='vkCmdSetLineWidth',desc='Set the dynamic line width state',type='protos']
--
The line width is specified by the
slink:VkPipelineRasterizationStateCreateInfo::pname:lineWidth property of
the currently active pipeline, if the pipeline was not created with
ename:VK_DYNAMIC_STATE_LINE_WIDTH enabled.
Otherwise, the line width is set by calling fname:vkCmdSetLineWidth:
include::../api/protos/vkCmdSetLineWidth.txt[]
* pname:commandBuffer is the command buffer into which the command will be
recorded.
* pname:lineWidth is the width of rasterized line segments.
.Valid Usage
****
* [[VUID-vkCmdSetLineWidth-None-00787]]
The bound graphics pipeline must: have been created with the
ename:VK_DYNAMIC_STATE_LINE_WIDTH dynamic state enabled
* [[VUID-vkCmdSetLineWidth-lineWidth-00788]]
If the <<features-features-wideLines,wide lines>> feature is not
enabled, pname:lineWidth must: be `1.0`
****
include::../validity/protos/vkCmdSetLineWidth.txt[]
--
Not all line widths need be supported for line segment rasterization, but
width 1.0 antialiased segments must: be provided.
The range and gradations are obtained from the pname:lineWidthRange and
pname:lineWidthGranularity members of slink:VkPhysicalDeviceLimits.
If, for instance, the size range is from 0.1 to 2.0 and the gradation size
is 0.1, then the size 0.1, 0.2, ..., 1.9, 2.0 are supported.
Additional line widths may: also be supported.
There is no requirement that these widths be equally spaced.
If an unsupported width is requested, the nearest supported width is used
instead.
[[primsrast-lines-basic]]
=== Basic Line Segment Rasterization
Rasterized line segments produce fragments which intersect a rectangle
centered on the line segment.
Two of the edges are parallel to the specified line segment; each is at a
distance of one-half the current width from that segment in directions
perpendicular to the direction of the line.
The other two edges pass through the line endpoints and are perpendicular to
the direction of the specified line segment.
Coverage bits that correspond to sample points that intersect the rectangle
are 1, other coverage bits are 0.
Next we specify how the data associated with each rasterized fragment are
obtained.
Let [eq]#**p**~r~ = (x~d~, y~d~)# be the framebuffer coordinates at which
associated data are evaluated.
This may: be the pixel center of a fragment or the location of a sample
within the fragment.
When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel
center must: be used.
Let [eq]#**p**~a~ = (x~a~, y~a~)# and [eq]#**p**~b~ = (x~b~,y~b~)# be
initial and final endpoints of the line segment, respectively.
Set
// Equation {linet:eq}
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
t = {{( \mathbf{p}_r - \mathbf{p}_a ) \cdot ( \mathbf{p}_b - \mathbf{p}_a )}
\over {\| \mathbf{p}_b - \mathbf{p}_a \|^2 }}
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(Note that [eq]#t = 0# at [eq]#**p**~a~# and [eq]#t = 1# at [eq]#**p**~b~#.
Also note that this calculation projects the vector from [eq]#**p**~a~# to
[eq]#**p**~r~# onto the line, and thus computes the normalized distance of
the fragment along the line.)
[[line_perspective_interpolation]]
The value of an associated datum [eq]#f# for the fragment, whether it be a
shader output or the clip [eq]#w# coordinate, must: be determined using
_perspective interpolation_:
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
f = {{ (1-t) {f_a / w_a} + t { f_b / w_b} } \over
{(1-t) / w_a + t / w_b }}
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
where [eq]#f~a~# and [eq]#f~b~# are the data associated with the starting
and ending endpoints of the segment, respectively; [eq]#w~a~# and [eq]#w~b~#
are the clip [eq]#w# coordinates of the starting and ending endpoints of the
segments, respectively.
[[line_linear_interpolation]]
Depth values for lines must: be determined using _linear interpolation_:
:: [eq]#z = (1 - t) z~a~ {plus} t z~b~#
where [eq]#z~a~# and [eq]#z~b~# are the depth values of the starting and
ending endpoints of the segment, respectively.
The code:NoPerspective and code:Flat
<<shaders-interpolation-decorations,interpolation decorations>> can: be used
with fragment shader inputs to declare how they are interpolated.
When neither decoration is applied, <<line_perspective_interpolation,
perspective interpolation>> is performed as described above.
When the code:NoPerspective decoration is used, <<line_linear_interpolation,
linear interpolation>> is performed in the same fashion as for depth values,
as described above.
When the code:Flat decoration is used, no interpolation is performed, and
outputs are taken from the corresponding input value of the
<<vertexpostproc-flatshading,provoking vertex>> corresponding to that
primitive.
The above description documents the preferred method of line rasterization,
and must: be used when the implementation advertises the pname:strictLines
limit in slink:VkPhysicalDeviceLimits as ename:VK_TRUE.
When pname:strictLines is ename:VK_FALSE, the edges of the lines are
generated as a parallelogram surrounding the original line.
The major axis is chosen by noting the axis in which there is the greatest
distance between the line start and end points.
If the difference is equal in both directions then the X axis is chosen as
the major axis.
Edges 2 and 3 are aligned to the minor axis and are centered on the
endpoints of the line as in <<fig-non-strict-lines>>, and each is
pname:lineWidth long.
Edges 0 and 1 are parallel to the line and connect the endpoints of edges 2
and 3.
Coverage bits that correspond to sample points that intersect the
parallelogram are 1, other coverage bits are 0.
Samples that fall exactly on the edge of the parallelogram follow the
polygon rasterization rules.
Interpolation occurs as if the parallelogram was decomposed into two
triangles where each pair of vertices at each end of the line has identical
attributes.
[[fig-non-strict-lines]]
[%inline]
image::images/non_strict_lines.svg[align="center",title="Non strict lines"]
[[primsrast-polygons]]
== Polygons
A polygon results from the decomposition of a triangle strip, triangle fan
or a series of independent triangles.
Like points and line segments, polygon rasterization is controlled by
several variables in the slink:VkPipelineRasterizationStateCreateInfo
structure.
[[primsrast-polygons-basic]]
=== Basic Polygon Rasterization
[open,refpage='VkFrontFace',desc='Interpret polygon front-facing orientation',type='enums']
--
The first step of polygon rasterization is to determine whether the triangle
is _back-facing_ or _front-facing_.
This determination is made based on the sign of the (clipped or unclipped)
polygon's area computed in framebuffer coordinates.
One way to compute this area is:
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
a = -{1 \over 2}\sum_{i=0}^{n-1}
x_f^i y_f^{i \oplus 1} -
x_f^{i \oplus 1} y_f^i
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
where latexmath:[x_f^i] and latexmath:[y_f^i] are the [eq]#x# and [eq]#y#
framebuffer coordinates of the [eq]##i##th vertex of the [eq]#n#-vertex
polygon (vertices are numbered starting at zero for the purposes of this
computation) and [eq]#i {oplus} 1# is [eq]#(i {plus} 1) mod n#.
The interpretation of the sign of [eq]#a# is determined by the
slink:VkPipelineRasterizationStateCreateInfo::pname:frontFace property of
the currently active pipeline.
Possible values are:
include::../api/enums/VkFrontFace.txt[]
* ename:VK_FRONT_FACE_COUNTER_CLOCKWISE specifies that a triangle with
positive area is considered front-facing.
* ename:VK_FRONT_FACE_CLOCKWISE specifies that a triangle with negative
area is considered front-facing.
Any triangle which is not front-facing is back-facing, including zero-area
triangles.
--
[open,refpage='VkCullModeFlagBits',desc='Bitmask controlling triangle culling',type='enums']
--
Once the orientation of triangles is determined, they are culled according
to the slink:VkPipelineRasterizationStateCreateInfo::pname:cullMode property
of the currently active pipeline.
Possible values are:
include::../api/enums/VkCullModeFlagBits.txt[]
* ename:VK_CULL_MODE_NONE specifies that no triangles are discarded
* ename:VK_CULL_MODE_FRONT_BIT specifies that front-facing triangles are
discarded
* ename:VK_CULL_MODE_BACK_BIT specifies that back-facing triangles are
discarded
* ename:VK_CULL_MODE_FRONT_AND_BACK specifies that all triangles are
discarded.
Following culling, fragments are produced for any triangles which have not
been discarded.
--
[open,refpage='VkCullModeFlags',desc='Bitmask of VkCullModeFlagBits',type='enums']
--
include::../api/flags/VkCullModeFlags.txt[]
sname:VkCullModeFlags is a bitmask type for setting a mask of zero or more
slink:VkCullModeFlagBits.
--
The rule for determining which fragments are produced by polygon
rasterization is called _point sampling_.
The two-dimensional projection obtained by taking the x and y framebuffer
coordinates of the polygon's vertices is formed.
Fragments are produced for any pixels for which any sample points lie inside
of this polygon.
Coverage bits that correspond to sample points that satisfy the point
sampling criteria are 1, other coverage bits are 0.
Special treatment is given to a sample whose sample location lies on a
polygon edge.
In such a case, if two polygons lie on either side of a common edge (with
identical endpoints) on which a sample point lies, then exactly one of the
polygons must: result in a covered sample for that fragment during
rasterization.
As for the data associated with each fragment produced by rasterizing a
polygon, we begin by specifying how these values are produced for fragments
in a triangle.
Define _barycentric coordinates_ for a triangle.
Barycentric coordinates are a set of three numbers, [eq]#a#, [eq]#b#, and
[eq]#c#, each in the range [eq]#[0,1]#, with [eq]#a {plus} b {plus} c = 1#.
These coordinates uniquely specify any point [eq]#p# within the triangle or
on the triangle's boundary as
:: [eq]#p = a p~a~ {plus} b p~b~ {plus} c p~c~#
where [eq]#p~a~#, [eq]#p~b~#, and [eq]#p~c~# are the vertices of the
triangle.
[eq]#a#, [eq]#b#, and [eq]#c# are determined by:
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
a = {{\mathrm{A}(p p_b p_c)} \over {\mathrm{A}(p_a p_b p_c)}}, \quad
b = {{\mathrm{A}(p p_a p_c)} \over {\mathrm{A}(p_a p_b p_c)}}, \quad
c = {{\mathrm{A}(p p_a p_b)} \over {\mathrm{A}(p_a p_b p_c)}},
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
where [eq]#A(lmn)# denotes the area in framebuffer coordinates of the
triangle with vertices [eq]#l#, [eq]#m#, and [eq]#n#.
Denote an associated datum at [eq]#p~a~#, [eq]#p~b~#, or [eq]#p~c~# as
[eq]#f~a~#, [eq]#f~b~#, or [eq]#f~c~#, respectively.
[[triangle_perspective_interpolation]]
The value of an associated datum [eq]#f# for a fragment produced by
rasterizing a triangle, whether it be a shader output or the clip [eq]#w#
coordinate, must: be determined using perspective interpolation:
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
f = { a {f_a / w_a} + b {f_b / w_b} + c {f_c / w_c} } \over
{ {a / w_a} + {b / w_b} + {c / w_c} }
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
where [eq]#w~a~#, [eq]#w~b~#, and [eq]#w~c~# are the clip [eq]#w#
coordinates of [eq]#p~a~#, [eq]#p~b~#, and [eq]#p~c~#, respectively.
[eq]#a#, [eq]#b#, and [eq]#c# are the barycentric coordinates of the
location at which the data are produced - this must: be a pixel center or
the location of a sample.
When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel
center must: be used.
[[triangle_linear_interpolation]]
Depth values for triangles must: be determined using linear interpolation:
:: [eq]#z = a z~a~ {plus} b z~b~ {plus} c z~c~#
where [eq]#z~a~#, [eq]#z~b~#, and [eq]#z~c~# are the depth values of
[eq]#p~a~#, [eq]#p~b~#, and [eq]#p~c~#, respectively.
The code:NoPerspective and code:Flat
<<shaders-interpolation-decorations,interpolation decorations>> can: be used
with fragment shader inputs to declare how they are interpolated.
When neither decoration is applied, <<triangle_perspective_interpolation,
perspective interpolation>> is performed as described above.
When the code:NoPerspective decoration is used,
<<triangle_linear_interpolation, linear interpolation>> is performed in the
same fashion as for depth values, as described above.
When the code:Flat decoration is used, no interpolation is performed, and
outputs are taken from the corresponding input value of the
<<vertexpostproc-flatshading,provoking vertex>> corresponding to that
primitive.
ifdef::VK_AMD_shader_explicit_vertex_parameter[]
When the `<<VK_AMD_shader_explicit_vertex_parameter>>` device extension is
enabled the code:CustomInterpAMD <<shaders-interpolation-decorations,
interpolation decoration>> can: also be used with fragment shader inputs
which indicate that the decorated inputs can: only be accessed by the
extended instruction code:InterpolateAtVertexAMD and allows accessing the
value of the inputs for individual vertices of the primitive.
endif::VK_AMD_shader_explicit_vertex_parameter[]
For a polygon with more than three edges, such as are produced by clipping a
triangle, a convex combination of the values of the datum at the polygon's
vertices must: be used to obtain the value assigned to each fragment
produced by the rasterization algorithm.
That is, it must: be the case that at every fragment
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
f = \sum_{i=1}^{n} a_i f_i
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
where [eq]#n# is the number of vertices in the polygon and [eq]#f~i~# is the
value of [eq]#f# at vertex [eq]#i#.
For each [eq]#i#, [eq]#0 {leq} a~i~ {leq} 1# and
latexmath:[\sum_{i=1}^{n}a_i = 1].
The values of [eq]#a~i~# may: differ from fragment to fragment, but at
vertex [eq]#i#, [eq]#a~i~ = 1# and [eq]#a~j~ = 0# for [eq]#j {neq} i#.
[NOTE]
.Note
====
One algorithm that achieves the required behavior is to triangulate a
polygon (without adding any vertices) and then treat each triangle
individually as already discussed.
A scan-line rasterizer that linearly interpolates data along each edge and
then linearly interpolates data across each horizontal span from edge to
edge also satisfies the restrictions (in this case, the numerator and
denominator of equation <<triangle_perspective_interpolation>> are iterated
independently and a division performed for each fragment).
====
[[primsrast-polygonmode]]
=== Polygon Mode
[open,refpage='VkPolygonMode',desc='Control polygon rasterization mode',type='enums']
--
Possible values of the
slink:VkPipelineRasterizationStateCreateInfo::pname:polygonMode property of
the currently active pipeline, specifying the method of rasterization for
polygons, are:
include::../api/enums/VkPolygonMode.txt[]
* ename:VK_POLYGON_MODE_POINT specifies that polygon vertices are drawn as
points.
* ename:VK_POLYGON_MODE_LINE specifies that polygon edges are drawn as
line segments.
* ename:VK_POLYGON_MODE_FILL specifies that polygons are rendered using
the polygon rasterization rules in this section.
ifdef::VK_NV_fill_rectangle[]
* ename:VK_POLYGON_MODE_FILL_RECTANGLE_NV specifies that polygons are
rendered using polygon rasterization rules, modified to consider a
sample within the primitive if the sample location is inside the
axis-aligned bounding box of the triangle after projection.
Note that the barycentric weights used in attribute interpolation can:
extend outside the range [eq]#[0,1]# when these primitives are shaded.
Special treatment is given to a sample position on the boundary edge of
the bounding box.
In such a case, if two rectangles lie on either side of a common edge
(with identical endpoints) on which a sample position lies, then exactly
one of the triangles must: produce a fragment that covers that sample
during rasterization.
+
Polygons rendered in ename:VK_POLYGON_MODE_FILL_RECTANGLE_NV mode may: be
clipped by the frustum or by user clip planes.
If clipping is applied, the triangle is culled rather than clipped.
+
Area calculation and facingness are determined for
ename:VK_POLYGON_MODE_FILL_RECTANGLE_NV mode using the triangle's
vertices.
endif::VK_NV_fill_rectangle[]
These modes affect only the final rasterization of polygons: in particular,
a polygon's vertices are shaded and the polygon is clipped and possibly
culled before these modes are applied.
--
[[primsrast-depthbias]]
=== Depth Bias
[open,refpage='vkCmdSetDepthBias',desc='Set the depth bias dynamic state',type='protos']
--
The depth values of all fragments generated by the rasterization of a
polygon can: be offset by a single value that is computed for that polygon.
This behavior is controlled by the pname:depthBiasEnable,
pname:depthBiasConstantFactor, pname:depthBiasClamp, and
pname:depthBiasSlopeFactor members of
slink:VkPipelineRasterizationStateCreateInfo, or by the corresponding
parameters to the fname:vkCmdSetDepthBias command if depth bias state is
dynamic.
include::../api/protos/vkCmdSetDepthBias.txt[]
* pname:commandBuffer is the command buffer into which the command will be
recorded.
* pname:depthBiasConstantFactor is a scalar factor controlling the
constant depth value added to each fragment.
* pname:depthBiasClamp is the maximum (or minimum) depth bias of a
fragment.
* pname:depthBiasSlopeFactor is a scalar factor applied to a fragment's
slope in depth bias calculations.
If pname:depthBiasEnable is ename:VK_FALSE, no depth bias is applied and the
fragment's depth values are unchanged.
pname:depthBiasSlopeFactor scales the maximum depth slope of the polygon,
and pname:depthBiasConstantFactor scales an implementation-dependent
constant that relates to the usable resolution of the depth buffer.
The resulting values are summed to produce the depth bias value which is
then clamped to a minimum or maximum value specified by
pname:depthBiasClamp.
pname:depthBiasSlopeFactor, pname:depthBiasConstantFactor, and
pname:depthBiasClamp can: each be positive, negative, or zero.
The maximum depth slope [eq]#m# of a triangle is
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
m = \sqrt{ \left({{\partial z_f} \over {\partial x_f}}\right)^2
+ \left({{\partial z_f} \over {\partial y_f}}\right)^2}
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
where [eq]#(x~f~, y~f~, z~f~)# is a point on the triangle.
[eq]#m# may: be approximated as
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
m = \max\left( \left| { {\partial z_f} \over {\partial x_f} } \right|,
\left| { {\partial z_f} \over {\partial y_f} } \right|
\right).
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The minimum resolvable difference [eq]#r# is an implementation-dependent
parameter that depends on the depth buffer representation.
It is the smallest difference in framebuffer coordinate [eq]#z# values that
is guaranteed to remain distinct throughout polygon rasterization and in the
depth buffer.
All pairs of fragments generated by the rasterization of two polygons with
otherwise identical vertices, but [eq]#pname:z~f~# values that differ by
[eq]#r#, will have distinct depth values.
For fixed-point depth buffer representations, [eq]#r# is constant throughout
the range of the entire depth buffer.
For floating-point depth buffers, there is no single minimum resolvable
difference.
In this case, the minimum resolvable difference for a given polygon is
dependent on the maximum exponent, [eq]#e#, in the range of [eq]#z# values
spanned by the primitive.
If [eq]#n# is the number of bits in the floating-point mantissa, the minimum
resolvable difference, [eq]#r#, for the given primitive is defined as
:: [eq]#r = 2^e-n^#
ifdef::VK_NV_fill_rectangle[]
If a triangle is rasterized using the
ename:VK_POLYGON_MODE_FILL_RECTANGLE_NV polygon mode, then this minimum
resolvable difference may: not be resolvable for samples outside of the
triangle, where the depth is extrapolated.
endif::VK_NV_fill_rectangle[]
If no depth buffer is present, [eq]#r# is undefined.
The bias value [eq]#o# for a polygon is
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
o =
\begin{cases}
m \times depthBiasSlopeFactor +
r \times depthBiasConstantFactor & depthBiasClamp = 0\ or\ NaN \\
\min(m \times depthBiasSlopeFactor +
r \times depthBiasConstantFactor,
depthBiasClamp) & depthBiasClamp > 0 \\
\max(m \times depthBiasSlopeFactor +
r \times depthBiasConstantFactor,
depthBiasClamp) & depthBiasClamp < 0 \\
\end{cases}
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[eq]#m# is computed as described above.
If the depth buffer uses a fixed-point representation, [eq]#m# is a function
of depth values in the range [eq]#[0,1]#, and [eq]#o# is applied to depth
values in the same range.
For fixed-point depth buffers, fragment depth values are always limited to
the range [eq]#[0,1]# by clamping after depth bias addition is performed.
ifdef::VK_EXT_depth_range_unrestricted[]
Unless the `<<VK_EXT_depth_range_unrestricted>>` extension is enabled,
fragment depth values are clamped even when the depth buffer uses a
floating-point representation.
endif::VK_EXT_depth_range_unrestricted[]
ifndef::VK_EXT_depth_range_unrestricted[]
Fragment depth values are clamped even when the depth buffer uses a
floating-point representation.
endif::VK_EXT_depth_range_unrestricted[]
.Valid Usage
****
* [[VUID-vkCmdSetDepthBias-None-00789]]
The bound graphics pipeline must: have been created with the
ename:VK_DYNAMIC_STATE_DEPTH_BIAS dynamic state enabled
* [[VUID-vkCmdSetDepthBias-depthBiasClamp-00790]]
If the <<features-features-depthBiasClamp,depth bias clamping>> feature
is not enabled, pname:depthBiasClamp must: be `0.0`
****
include::../validity/protos/vkCmdSetDepthBias.txt[]
--
ifdef::VK_EXT_conservative_rasterization[]
[[primsrast-conservativeraster]]
=== Conservative Rasterization
[open,refpage='VkPipelineRasterizationConservativeStateCreateInfoEXT',desc='Structure specifying conservative raster state',type='structs']
--
Polygon rasterization can: be made conservative by setting
pname:conservativeRasterizationMode to
ename:VK_CONSERVATIVE_RASTERIZATION_MODE_OVERESTIMATE_EXT or
ename:VK_CONSERVATIVE_RASTERIZATION_MODE_UNDERESTIMATE_EXT in
sname:VkPipelineRasterizationConservativeStateCreateInfoEXT.
The sname:VkPipelineRasterizationConservativeStateCreateInfoEXT state is set
by adding an instance of this structure to the pname:pNext chain of an
instance of the sname:VkPipelineRasterizationStateCreateInfo structure when
creating the graphics pipeline.
Enabling these modes also affects line and point rasterization if the
implementation sets
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:conservativePointAndLineRasterization
to pname:VK_TRUE.
sname:VkPipelineRasterizationConservativeStateCreateInfoEXT is defined as:
include::../api/structs/VkPipelineRasterizationConservativeStateCreateInfoEXT.txt[]
* pname:sType is the type of this structure.
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
* pname:flags is reserved for future use.
* pname:conservativeRasterizationMode is the conservative rasterization
mode to use.
* pname:extraPrimitiveOverestimationSize is the extra size in pixels to
increase the generating primitive during conservative rasterization at
each of its edges in `X` and `Y` equally in screen space beyond the base
overestimation specified in
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:primitiveOverestimationSize.
.Valid Usage
****
* [[VUID-VkPipelineRasterizationConservativeStateCreateInfoEXT-extraPrimitiveOverestimationSize-01769]]
pname:extraPrimitiveOverestimationSize must: be in the range of `0.0` to
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:maxExtraPrimitiveOverestimationSize
inclusive
****
include::../validity/structs/VkPipelineRasterizationConservativeStateCreateInfoEXT.txt[]
--
[open,refpage='VkPipelineRasterizationConservativeStateCreateFlagsEXT',desc='Reserved for future use',type='enums']
--
include::../api/flags/VkPipelineRasterizationConservativeStateCreateFlagsEXT.txt[]
sname:VkPipelineRasterizationConservativeStateCreateFlagsEXT is a bitmask
type for setting a mask, but is currently reserved for future use.
--
[open,refpage='VkConservativeRasterizationModeEXT',desc='Specify the conservative rasterization mode',type='enums']
--
Possible values of
slink:VkPipelineRasterizationConservativeStateCreateInfoEXT::pname:conservativeRasterizationMode,
specifying the conservative rasterization mode are:
include::../api/enums/VkConservativeRasterizationModeEXT.txt[]
* ename:VK_CONSERVATIVE_RASTERIZATION_MODE_DISABLED_EXT specifies that
conservative rasterization is disabled and rasterization proceeds as
normal.
* ename:VK_CONSERVATIVE_RASTERIZATION_MODE_OVERESTIMATE_EXT specifies that
conservative rasterization is enabled in overestimation mode.
* ename:VK_CONSERVATIVE_RASTERIZATION_MODE_UNDERESTIMATE_EXT specifies
that conservative rasterization is enabled in underestimation mode.
--
When overestimate conservative rasterization is enabled, rather than
evaluating coverage at individual sample locations, a determination is made
of whether any portion of the pixel (including its edges and corners) is
covered by the primitive.
If any portion of the pixel is covered, then all bits of the coverage sample
mask for the fragment are enabled.
ifdef::VK_EXT_post_depth_coverage[]
If the implementation supports
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:conservativeRasterizationPostDepthCoverage
and the
<<shaders-fragment-earlytest-postdepthcoverage,code:PostDepthCoverage>>
execution mode is specified the code:SampleMask built-in input variable will
reflect the coverage after the early per-fragment depth and stencil tests
are applied.
endif::VK_EXT_post_depth_coverage[]
For the purposes of evaluating which pixels are covered by the primitive,
implementations can: increase the size of the primitive by up to
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:primitiveOverestimationSize
pixels at each of the primitive edges.
This may: increase the number of fragments generated by this primitive and
represents an overestimation of the pixel coverage.
This overestimation size can be increased further by setting the
pname:extraPrimitiveOverestimationSize value above `0.0` in steps of
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:extraPrimitiveOverestimationSizeGranularity
up to and including
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:extraPrimitiveOverestimationSize.
This will: further increase the number of fragments generated by this
primitive.
The actual precision of the overestimation size used for conservative
rasterization may: vary between implementations and produce results that
only approximate the pname:primitiveOverestimationSize and
pname:extraPrimitiveOverestimationSizeGranularity properties.
For triangles if ename:VK_CONSERVATIVE_RASTERIZATION_MODE_OVERESTIMATE_EXT
is enabled, fragments will be generated if the primitive area covers any
portion of the pixel, including its edges or corners.
The tie-breaking rule described in <<primsrast-polygons-basic, Basic Polygon
Rasterization>> does not apply during conservative rasterization and
coverage is set for all fragments generated from shared edges of polygons.
Degenerate triangles that evaluate to zero area after rasterization, even
for pixels that contain a vertex or edge of the zero-area polygon, will be
culled if
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:degenerateTrianglesRasterized
is ename:VK_FALSE or will generate fragments if
pname:degenerateTrianglesRasterized is ename:VK_TRUE.
The fragment input values for these degenerate triangles take their
attribute and depth values from the provoking vertex.
Degenerate triangles are considered backfacing and the application can:
enable backface culling if desired.
Triangles that are zero area before rasterization may: be culled regardless.
For lines if ename:VK_CONSERVATIVE_RASTERIZATION_MODE_OVERESTIMATE_EXT is
enabled, and the implementation sets
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:conservativePointAndLineRasterization
to ename:VK_TRUE, fragments will be generated if the line covers any portion
of the pixel, including its edges or corners.
Degenerate lines that evaluate to zero length after rasterization will be
culled if
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:degenerateLinesRasterized
is ename:VK_FALSE or will generate fragments if
pname:degenerateLinesRasterized is ename:VK_TRUE.
The fragments input values for these degenerate lines take their attribute
and depth values from the provoking vertex.
Lines that are zero length before rasterization may: be culled regardless.
For points if ename:VK_CONSERVATIVE_RASTERIZATION_MODE_OVERESTIMATE_EXT is
enabled, and the implementation sets
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:conservativePointAndLineRasterization
to ename:VK_TRUE, fragments will be generated if the point square covers any
portion of the pixel square, including its edges or corners.
When underestimate conservative rasterization is enabled, rather than
evaluating coverage at individual sample locations, a determination is made
of whether all of the pixel (including its edges and corners) is covered by
the primitive.
If the entire pixel is covered, then a fragment is generated with all bits
of its coverage sample mask enabled, otherwise the fragment is discarded
even if some portion of the pixel is covered.
ifdef::VK_EXT_post_depth_coverage[]
If the implementation supports
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:conservativeRasterizationPostDepthCoverage
and the
<<shaders-fragment-earlytest-postdepthcoverage,code:PostDepthCoverage>>
execution mode is specified the code:SampleMask built-in input variable will
reflect the coverage after the early per-fragment depth and stencil tests
are applied.
endif::VK_EXT_post_depth_coverage[]
For triangles, if ename:VK_CONSERVATIVE_RASTERIZATION_MODE_UNDERESTIMATE_EXT
is enabled, fragments will only be generated if they are fully covered by
the generating primitive, including its edges and corners.
For lines, if ename:VK_CONSERVATIVE_RASTERIZATION_MODE_UNDERESTIMATE_EXT is
enabled, fragments will be generated if the entire pixel, including its
edges and corners is covered by the line.
For points, if ename:VK_CONSERVATIVE_RASTERIZATION_MODE_UNDERESTIMATE_EXT is
enabled, fragments will only be generated for pixel squares that are fully
covered by the point square.
For both overestimate and underestimate conservative rasterization modes a
pixel square that is fully covered by the generating primitive must: set
code:FullyCoveredEXT to pname:VK_TRUE if the implementation enables the
sname:VkPhysicalDeviceConservativeRasterizationPropertiesEXT::pname:fullyCoveredFragmentShaderInputVariable
feature.
endif::VK_EXT_conservative_rasterization[]
Reference in New Issue View Git Blame Copy Permalink