// Copyright (c) 2015-2016 The Khronos Group Inc. // Copyright notice at https://www.khronos.org/registry/speccopyright.html [[interfaces]] = Shader Interfaces When a pipeline is created, the set of shaders specified in the corresponding stext:Vk*PipelineCreateInfo structure are implicitly linked at a number of different interfaces. * <> * <> * <> * <> * <> [[interfaces-iointerfaces]] == Shader Input and Output Interfaces When multiple stages are present in a pipeline, the outputs of one stage form an interface with the inputs of the next stage. When such an interface involves a shader, shader outputs are matched against the inputs of the next stage, and shader inputs are matched against the outputs of the previous stage. There are two classes of variables that can: be matched between shader stages, built-in variables and user-defined variables. Each class has a different set of matching criteria. Generally, when non-shader stages are between shader stages, the user-defined variables, and most built-in variables, form an interface between the shader stages. The variables forming the input or output _interfaces_ are listed as operands to the code:OpEntryPoint instruction and are declared with the code:Input or code:Output storage classes, respectively, in the SPIR-V module. code:Output variables of a shader stage have undefined values until the shader writes to them or uses the code:Initializer operand when declaring the variable. [[interfaces-iointerfaces-builtin]] === Built-in Interface Block Shader <> variables meeting the following requirements define the _built-in interface block_. They must: * be explicitly declared (there are no implicit built-ins), * be identified with a code:BuiltIn decoration, * form object types as described in the <> section, and * be declared in a block whose top-level members are the built-ins. Built-ins only participate in interface matching if they are declared in such a block. They must: not have any code:Location or code:Component decorations. There must: be no more than one built-in interface block per shader per interface. [[interfaces-iointerfaces-user]] === User-defined Variable Interface The remaining variables listed by code:OpEntryPoint with the code:Input or code:Output storage class form the _user-defined variable interface_. These variables must: be identified with a code:Location decoration and can: also be identified with a code:Component decoration. [[interfaces-iointerfaces-matching]] === Interface Matching A user-defined output variable is considered to match an input variable in the subsequent stage if the two variables are declared with the same code:Location and code:Component decoration and match in type and decoration, except that <> are not required: to match. For the purposes of interface matching, variables declared without a code:Component decoration are considered to have a code:Component decoration of zero. Variables or block members declared as structures are considered to match in type if and only if the structure members match in type, decoration, number, and declaration order. Variables or block members declared as arrays are considered to match in type only if both declarations specify the same element type and size. Tessellation control shader per-vertex output variables and blocks, and tessellation control, tessellation evaluation, and geometry shader per-vertex input variables and blocks are required to be declared as arrays, with each element representing input or output values for a single vertex of a multi-vertex primitive. For the purposes of interface matching, the outermost array dimension of such variables and blocks is ignored. At an interface between two non-fragment shader stages, the built-in interface block must: match exactly, as described above. At an interface involving the fragment shader inputs, the presence or absence of any built-in output does not affect the interface matching. At an interface between two shader stages, the user-defined variable interface must: match exactly, as described above. Any input value to a shader stage is well-defined as long as the preceding stages writes to a matching output, as described above. Additionally, scalar and vector inputs are well-defined if there is a corresponding output satisfying all of the following conditions: * the input and output match exactly in decoration, * the output is a vector with the same basic type and has at least as many components as the input, and * the common component type of the input and output is 32-bit integer or floating-point (64-bit component types are excluded). In this case, the components of the input will be taken from the first components of the output, and any extra components of the output will be ignored. [[interfaces-iointerfaces-locations]] === Location Assignment This section describes how many locations are consumed by a given type. As mentioned above, geometry shader inputs, tessellation control shader inputs and outputs, and tessellation evaluation inputs all have an additional level of arrayness relative to other shader inputs and outputs. This outer array level is removed from the type before considering how many locations the type consumes. The code:Location value specifies an interface slot comprised of a 32-bit four-component vector conveyed between stages. The code:Component specifies <> within these vector locations. Only types with widths of 32 or 64 are supported in shader interfaces. Inputs and outputs of the following types consume a single interface location: * 32-bit scalar and vector types, and * 64-bit scalar and 2-component vector types. 64-bit three- and four-component vectors consume two consecutive locations. If a declared input or output is an array of size _n_ and each element takes _m_ locations, it will be assigned _m_ × _n_ consecutive locations starting with the location specified. If the declared input or output is an _n_ × _m_ 32- or 64-bit matrix, it will be assigned multiple locations starting with the location specified. The number of locations assigned for each matrix will be the same as for an _n_-element array of _m_-component vectors. The layout of a structure type used as an code:Input or code:Output depends on whether it is also a code:Block (i.e. has a code:Block decoration). If it is a not a code:Block, then the structure type must: have a code:Location decoration. Its members are assigned consecutive locations in their declaration order, with the first member assigned to the location specified for the structure type. The members, and their nested types, must: not themselves have code:Location decorations. If the structure type is a code:Block but without a code:Location, then each of its members must: have a code:Location decoration. If it is a code:Block with a code:Location decoration, then its members are assigned consecutive locations in declaration order, starting from the first member which is initially assigned the location specified for the code:Block. Any member with its own code:Location decoration is assigned that location. Each remaining member is assigned the location after the immediately preceding member in declaration order. The locations consumed by block and structure members are determined by applying the rules above in a depth-first traversal of the instantiated members as though the structure or block member were declared as an input or output variable of the same type. Any two inputs listed as operands on the same code:OpEntryPoint must: not be assigned the same location, either explicitly or implicitly. Any two outputs listed as operands on the same code:OpEntryPoint must: not be assigned the same location, either explicitly or implicitly. The number of input and output locations available for a shader input or output interface are limited, and dependent on the shader stage as described in <>. [[interfaces-iointerfaces-limits]] .Shader Input and Output Locations [width="90%",cols="<6,<13",options="header"] |==== | Shader Interface | Locations Available | vertex input | pname:maxVertexInputAttributes | vertex output | pname:maxVertexOutputComponents / 4 | tessellation control input | pname:maxTessellationControlPerVertexInputComponents / 4 | tessellation control output | pname:maxTessellationControlPerVertexOutputComponents / 4 | tessellation evaluation input | pname:maxTessellationEvaluationInputComponents / 4 | tessellation evaluation output| pname:maxTessellationEvaluationOutputComponents / 4 | geometry input | pname:maxGeometryInputComponents / 4 | geometry output | pname:maxGeometryOutputComponents / 4 | fragment input | pname:maxFragmentInputComponents / 4 | fragment output | pname:maxFragmentOutputAttachments |==== [[interfaces-iointerfaces-components]] === Component Assignment The code:Component decoration allows the code:Location to be more finely specified for scalars and vectors, down to the individual components within a location that are consumed. The components within a location are 0, 1, 2, and 3. A variable or block member starting at component N will consume components N, N+1, N+2, ... up through its size. For single precision types, it is invalid if this sequence of components gets larger than 3. A scalar 64-bit type will consume two of these components in sequence, and a two-component 64-bit vector type will consume all four components available within a location. A three- or four-component 64-bit vector type must: not specify a code:Component decoration. A three-component 64-bit vector type will consume all four components of the first location and components 0 and 1 of the second location. This leaves components 2 and 3 available for other component-qualified declarations. A scalar or two-component 64-bit data type must: not specify a code:Component decoration of 1 or 3. A code:Component decoration must: not be specified for any type that is not a scalar or vector. [[interfaces-vertexinput]] == Vertex Input Interface When the vertex stage is present in a pipeline, the vertex shader input variables form an interface with the vertex input attributes. The vertex shader input variables are matched by the code:Location and code:Component decorations to the vertex input attributes specified in the pname:pVertexInputState member of the slink:VkGraphicsPipelineCreateInfo structure. The vertex shader input variables listed by code:OpEntryPoint with the code:Input storage class form the _vertex input interface_. These variables must: be identified with a code:Location decoration and can: also be identified with a code:Component decoration. For the purposes of interface matching: variables declared without a code:Component decoration are considered to have a code:Component decoration of zero. The number of available vertex input locations is given by the pname:maxVertexInputAttributes member of the sname:VkPhysicalDeviceLimits structure. See <> for details. All vertex shader inputs declared as above must: have a corresponding attribute and binding in the pipeline. [[interfaces-fragmentoutput]] == Fragment Output Interface When the fragment stage is present in a pipeline, the fragment shader outputs form an interface with the output attachments of the current subpass. The fragment shader output variables are matched by the code:Location and code:Component decorations to the color attachments specified in the pname:pColorAttachments array of the slink:VkSubpassDescription structure that describes the subpass that the fragment shader is executed in. The fragment shader output variables listed by code:OpEntryPoint with the code:Output storage class form the _fragment output interface_. These variables must: be identified with a code:Location decoration. They can: also be identified with a code:Component decoration and/or an code:Index decoration. For the purposes of interface matching: variables declared without a code:Component decoration are considered to have a code:Component decoration of zero, and variables declared without an code:Index decoration are considered to have an code:Index decoration of zero. A fragment shader output variable identified with a code:Location decoration of _i_ is directed to the color attachment indicated by pname:pColorAttachments[_i_], after passing through the blending unit as described in <>, if enabled. Locations are consumed as described in <>. The number of available fragment output locations is given by the pname:maxFragmentOutputAttachments member of the sname:VkPhysicalDeviceLimits structure. Components of the output variables are assigned as described in <>. Output components identified as 0, 1, 2, and 3 will be directed to the R, G, B, and A inputs to the blending unit, respectively, or to the output attachment if blending is disabled. If two variables are placed within the same location, they must: have the same underlying type (floating-point or integer). The input to blending or color attachment writes is undefined for components which do not correspond to a fragment shader output. Fragment outputs identified with an code:Index of zero are directed to the first input of the blending unit associated with the corresponding code:Location. Outputs identified with an code:Index of one are directed to the second input of the corresponding blending unit. No _component aliasing_ of output variables is allowed, that is there must: not be two output variables which have the same location, component, and index, either explicitly declared or implied. Output values written by a fragment shader must: be declared with either code:OpTypeFloat or code:OpTypeInt, and a Width of 32. Composites of these types are also permitted. If the color attachment has a signed or unsigned normalized fixed-point format, color values are assumed to be floating-point and are converted to fixed-point as described in <>; otherwise no type conversion is applied. If the type of the values written by the fragment shader do not match the format of the corresponding color attachment, the result is undefined for those components. [[interfaces-inputattachment]] == Fragment Input Attachment Interface When a fragment stage is present in a pipeline, the fragment shader subpass inputs form an interface with the input attachments of the current subpass. The fragment shader subpass input variables are matched by code:InputAttachmentIndex decorations to the input attachments specified in the pname:pInputAttachments array of the slink:VkSubpassDescription structure that describes the subpass that the fragment shader is executed in. The fragment shader subpass input variables with the code:UniformConstant storage class and a decoration of code:InputAttachmentIndex that are statically used by code:OpEntryPoint form the _fragment input attachment interface_. These variables must: be declared with a type of code:OpTypeImage, a code:Dim operand of code:SubpassData, and a code:Sampled operand of 2. A subpass input variable identified with an code:InputAttachmentIndex decoration of _i_ reads from the input attachment indicated by pname:pInputAttachments[_i_] member of sname:VkSubpassDescription. If the subpass input variable is declared as an array of size N, it consumes N consecutive input attachments, starting with the index specified. There must: not be more than one input variable with the same code:InputAttachmentIndex whether explicitly declared or implied by an array declaration. The number of available input attachment indices is given by the pname:maxPerStageDescriptorInputAttachments member of the sname:VkPhysicalDeviceLimits structure. Variables identified with the code:InputAttachmentIndex must: only be used by a fragment stage. The basic data type (floating-point, integer, unsigned integer) of the subpass input must: match the basic format of the corresponding input attachment, or the values of subpass loads from these variables are undefined. See <> for more details. [[interfaces-resources]] == Shader Resource Interface When a shader stage accesses buffer or image resources, as described in the <> section, the shader resource variables must: be matched with the <> that is provided at pipeline creation time. The set of shader resources that form the _shader resource interface_ for a stage are the variables statically used by code:OpEntryPoint with the storage class of code:Uniform, code:UniformConstant, or code:PushConstant. For the fragment shader, this includes the <>. The shader resource interface consists of two sub-interfaces: the push constant interface and the descriptor set interface. [[interfaces-resources-pushconst]] === Push Constant Interface The shader variables defined with a storage class of code:PushConstant that are statically used by the shader entry-points for the pipeline define the _push constant interface_. They must: be: * typed as code:OpTypeStruct, * identified with a code:Block decoration, and * laid out explicitly using the code:Offset, code:ArrayStride, and code:MatrixStride decorations as specified in <>. There must: be no more than one push constant block statically used per shader entry-point. Each variable in a push constant block must: be placed at an code:Offset such that the entire constant value is entirely contained within the slink:VkPushConstantRange for each code:OpEntryPoint that uses it, and the pname:stageFlags for that range must: specify the appropriate elink:VkShaderStageFlagBits for that stage. The code:Offset decoration for any variable in a push constant block must: not cause the space required for that variable to extend outside the range latexmath:[$[0, \mathit{maxPushConstantsSize})$]. Any variable in a push constant block that is declared as an array must: only be accessed with dynamically uniform indices. [[interfaces-resources-descset]] === Descriptor Set Interface The _descriptor set interface_ is comprised of the shader variables with the storage class of code:Uniform or code:UniformConstant (including the variables in the <>) that are statically used by the shader entry-points for the pipeline. These variables must: have code:DescriptorSet and code:Binding decorations specified, which are assigned and matched with the sname:VkDescriptorSetLayout objects in the pipeline layout as described in <>. Variables identified with the code:UniformConstant storage class are used only as handles to refer to opaque resources. Such variables must: be typed as code:OpTypeImage, code:OpTypeSampler, code:OpTypeSampledImage, or arrays of only these types. Variables of type code:OpTypeImage must: have a code:Sampled operand of 1 (sampled image) or 2 (storage image). Any array of these types must: only be indexed with constant integral expressions, except under the following conditions: * For arrays of code:OpTypeImage variables with code:Sampled operand of 2, if the pname:shaderStorageImageArrayDynamicIndexing feature is enabled and the shader module declares the code:StorageImageArrayDynamicIndexing capability, the array must: only be indexed by dynamically uniform expressions. * For arrays of code:OpTypeSampler, code:OpTypeSampledImage variables, or code:OpTypeImage variables with code:Sampled operand of 1, if the pname:shaderSampledImageArrayDynamicIndexing feature is enabled and the shader module declares the code:SampledImageArrayDynamicIndexing capability, the array must: only be indexed by dynamically uniform expressions. The code:Sampled code:Type of an code:OpTypeImage declaration must: match the same basic data type as the corresponding resource, or the values obtained by reading or sampling from this image are undefined. The code:Image code:Format of an code:OpTypeImage declaration must: not be *Unknown*, for variables which are used for code:OpImageRead or code:OpImageWrite operations, except under the following conditions: * For code:OpImageWrite, if the pname:shaderStorageImageWriteWithoutFormat feature is enabled and the shader module declares the code:StorageImageWriteWithoutFormat capability. * For code:OpImageRead, if the pname:shaderStorageImageReadWithoutFormat feature is enabled and the shader module declares the code:StorageImageReadWithoutFormat capability. Variables identified with the code:Uniform storage class are used to access transparent buffer backed resources. Such variables must: be: * typed as code:OpTypeStruct, or arrays of only this type, * identified with a code:Block or code:BufferBlock decoration, and * laid out explicitly using the code:Offset, code:ArrayStride, and code:MatrixStride decorations as specified in <>. Any array of these types must: only be indexed with constant integral expressions, except under the following conditions. * For arrays of code:Block variables, if the pname:shaderUniformBufferArrayDynamicIndexing feature is enabled and the shader module declares the code:UniformBufferArrayDynamicIndexing capability, the array must: only be indexed by dynamically uniform expressions. * For arrays of code:BufferBlock variables, if the pname:shaderStorageBufferArrayDynamicIndexing feature is enabled and the shader module declares the code:StorageBufferArrayDynamicIndexing capability, the array must: only be indexed by dynamically uniform expressions. The code:Offset decoration for any variable in a code:Block must: not cause the space required for that variable to extend outside the range latexmath:[$[0, \mathit{maxUniformBufferRange})$]. The code:Offset decoration for any variable in a code:BufferBlock must: not cause the space required for that variable to extend outside the range latexmath:[$[0, \mathit{maxStorageBufferRange})$]. Variables identified with a storage class of code:UniformConstant and a decoration of code:InputAttachmentIndex must: be declared as described in <>. Each shader variable declaration must: refer to the same type of resource as is indicated by the pname:descriptorType. See <> for the relationship between shader declarations and descriptor types. [[interfaces-resources-correspondence]] .Shader Resource and Descriptor Type Correspondence [width="90%",cols="<1,<2",options="header"] |==== | Resource type | Descriptor Type | sampler | ename:VK_DESCRIPTOR_TYPE_SAMPLER | sampled image | ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE | storage image | ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE | combined image sampler | ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER | uniform texel buffer | ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER | storage texel buffer | ename:VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER | uniform buffer | ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER + ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC | storage buffer | ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER + ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC | input attachment | ename:VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT |==== .Shader Resource and Storage Class Correspondence [width="100%",cols="<21%,<22%,<27%,<30%",options="header"] |==== | Resource type | Storage Class | Type | Decoration(s)^1^ | sampler | code:UniformConstant | code:OpTypeSampler | | sampled image | code:UniformConstant | code:OpTypeImage (code:Sampled=1)| | storage image | code:UniformConstant | code:OpTypeImage (code:Sampled=2) | | combined image sampler | code:UniformConstant | code:OpTypeSampledImage | | uniform texel buffer | code:UniformConstant | code:OpTypeImage (code:Dim=code:Buffer, code:Sampled=1) | | storage texel buffer | code:UniformConstant | code:OpTypeImage (code:Dim=code:Buffer, code:Sampled=2) | | uniform buffer | code:Uniform | code:OpTypeStruct | code:Block, code:Offset, (code:ArrayStride), (code:MatrixStride) | storage buffer | code:Uniform | code:OpTypeStruct | code:BufferBlock, code:Offset, (code:ArrayStride), (code:MatrixStride) | input attachment | code:UniformConstant | code:OpTypeImage (code:Dim=code:SubpassData, code:Sampled=2) | code:InputAttachmentIndex |==== 1:: in addition to code:DescriptorSet and code:Binding [[interfaces-resources-setandbinding]] === DescriptorSet and Binding Assignment A variable identified with a code:DescriptorSet decoration of latexmath:[$s$] and a code:Binding decoration of latexmath:[$b$] indicates that this variable is associated with the slink:VkDescriptorSetLayoutBinding that has a pname:binding equal to latexmath:[$b$] in pname:pSetLayouts[_s_] that was specified in slink:VkPipelineLayoutCreateInfo. The range of descriptor sets is between zero and pname:maxBoundDescriptorSets minus one. If a descriptor set value is statically used by an entry-point there must: be an associated pname:pSetLayout in the corresponding pipeline layout as described in <>. If the code:Binding decoration is used with an array, the entire array is identified with that binding value. The size of the array declaration must: be no larger than the pname:descriptorCount of that sname:VkDescriptorSetLayoutBinding. The index of each element of the array is referred to as the _arrayElement_. For the purposes of interface matching and descriptor set <>, if a resource variable is not an array, it is treated as if it has an arrayElement of zero. The binding can: be any 32-bit unsigned integer value, as described in <>. Each descriptor set has its own binding name space. There is a limit on the number of resources of each type that can: be accessed by a pipeline stage as shown in <>. The ``Resources Per Stage'' column gives the limit on the number each type of resource that can: be statically used for an entry-point in any given stage in a pipeline. The ``Resource Types'' column lists which resource types are counted against the limit. Some resource types count against multiple limits. If multiple entry-points in the same pipeline refer to the same set and binding, all variable definitions with that code:DescriptorSet and code:Binding must: have the same basic type. Not all descriptor sets and bindings specified in a pipeline layout need to be used in a particular shader stage or pipeline, but if a code:DescriptorSet and code:Binding decoration is specified for a variable that is statically used in that shader there must: be a pipeline layout entry identified with that descriptor set and pname:binding and the corresponding pname:stageFlags must: specify the appropriate elink:VkShaderStageFlagBits for that stage. [[interfaces-resources-limits]] .Shader Resource Limits [width="80%",cols="<35,<23",options="header"] |==== | Resources per Stage | Resource Types .2+<.^| maxPerStageDescriptorSamplers | sampler | combined image sampler .3+<.^| maxPerStageDescriptorSampledImages | sampled image | combined image sampler | uniform texel buffer .2+<.^| maxPerStageDescriptorStorageImages | storage image | storage texel buffer .2+<.^| maxPerStageDescriptorUniformBuffers | uniform buffer | uniform buffer dynamic .2+<.^| maxPerStageDescriptorStorageBuffers | storage buffer | storage buffer dynamic | maxPerStageDescriptorInputAttachments | input attachment^1^ |==== 1:: Input attachments can: only be used in the fragment shader stage [[interfaces-resources-layout]] === Offset and Stride Assignment All variables with a storage class of code:PushConstant or code:Uniform must: be explicitly laid out using the code:Offset, code:ArrayStride, and code:MatrixStride decorations. There are two different layouts requirements depending on the specific resources. [[interfaces-resources-layout-std140]] *Standard Uniform Buffer Layout* Member variables of an code:OpTypeStruct with storage class of code:Uniform and a decoration of code:Block (uniform buffers) must: be laid out according to the following rules. * The code:Offset Decoration must: be a multiple of its base alignment, computed recursively as follows: ** a scalar of size latexmath:[$N$] has a base alignment of latexmath:[$N$] ** a two-component vector, with components of size latexmath:[$N$], has a base alignment of latexmath:[$2N$] ** a three- or four-component vector, with components of size latexmath:[$N$], has a base alignment of latexmath:[$4N$] ** an array has a base alignment equal to the base alignment of its element type, rounded up to a multiple of latexmath:[$16$] ** a structure has a base alignment equal to the largest base alignment of any of its members, rounded up to a multiple of latexmath:[$16$] ** a row-major matrix of latexmath:[$C$] columns has a base alignment equal to the base alignment of vector of latexmath:[$C$] matrix components ** a column-major matrix has a base alignment equal to the base alignment of the matrix column type * Any code:ArrayStride or code:MatrixStride decoration must: be an integer multiple of the base alignment of the array or matrix from above. * The code:Offset Decoration of a member must: not place it between the end of a structure or an array and the next multiple of the base alignment of that structure or array. * The numeric order of code:Offset Decorations need not follow member declaration order. [NOTE] .Note ==== The *std140 layout* in GLSL satisfies these rules. ==== [[interfaces-resources-layout-std430]] *Standard Storage Buffer Layout* Member variables of an code:OpTypeStruct with a storage class of code:PushConstant (push constants), or a storage class of code:Uniform with a decoration of code:BufferBlock (storage buffers) must: be laid out as <>, except for array and structure base alignment which do not need to be rounded up to a multiple of latexmath:[$16$]. [NOTE] .Note ==== The *std430 layout* in GLSL satisfies these rules. ==== [[interfaces-builtin-variables]] == Built-In Variables Built-in variables are accessed in shaders by declaring a variable decorated with a code:BuiltIn decoration. The meaning of each code:BuiltIn decoration is as follows. In the remainder of this section, the name of a built-in is used interchangeably with a term equivalent to a variable decorated with that particular built-in. Built-ins that represent integer values can: be declared as either signed or unsigned 32-bit integers. ifdef::VK_AMD_shader_explicit_vertex_parameter[] code:BaryCoordNoPerspAMD:: The code:BaryCoordNoPerspAMD decoration can: be used to decorate a fragment shader input variable. This variable will contain the (I,J) pair of the barycentric coordinates corresponding to the fragment evaluated using linear interpolation at the pixel's center. The K coordinate of the barycentric coordinates can: be derived given the identity I + J + K = 1.0. code:BaryCoordNoPerspCentroidAMD:: The code:BaryCoordNoPerspCentroidAMD decoration can: be used to decorate a fragment shader input variable. This variable will contain the (I,J) pair of the barycentric coordinates corresponding to the fragment evaluated using linear interpolation at the centroid. The K coordinate of the barycentric coordinates can: be derived given the identity I + J + K = 1.0. code:BaryCoordNoPerspSampleAMD:: The code:BaryCoordNoPerspCentroidAMD decoration can: be used to decorate a fragment shader input variable. This variable will contain the (I,J) pair of the barycentric coordinates corresponding to the fragment evaluated using linear interpolation at each covered sample. The K coordinate of the barycentric coordinates can: be derived given the identity I + J + K = 1.0. code:BaryCoordPullModelAMD:: The code:BaryCoordPullModelAMD decoration can: be used to decorate a fragment shader input variable. This variable will contain (1/W, 1/I, 1/J) evaluated at the pixel center and can: be used to calculate gradients and then interpolate I, J, and W at any desired sample location. code:BaryCoordSmoothAMD:: The code:BaryCoordSmoothAMD decoration can: be used to decorate a fragment shader input variable. This variable will contain the (I,J) pair of the barycentric coordinates corresponding to the fragment evaluated using perspective interpolation at the pixel's center. The K coordinate of the barycentric coordinates can: be derived given the identity I + J + K = 1.0. code:BaryCoordSmoothCentroidAMD:: The code:BaryCoordSmoothCentroidAMD decoration can: be used to decorate a fragment shader input variable. This variable will contain the (I,J) pair of the barycentric coordinates corresponding to the fragment evaluated using perspective interpolation at the centroid. The K coordinate of the barycentric coordinates can: be derived given the identity I + J + K = 1.0. code:BaryCoordSmoothSampleAMD:: The code:BaryCoordSmoothCentroidAMD decoration can: be used to decorate a fragment shader input variable. This variable will contain the (I,J) pair of the barycentric coordinates corresponding to the fragment evaluated using perspective interpolation at each covered sample. The K coordinate of the barycentric coordinates can: be derived given the identity I + J + K = 1.0. endif::VK_AMD_shader_explicit_vertex_parameter[] code:ClipDistance:: Decorating a variable with the code:ClipDistance built-in decoration will make that variable contain the mechanism for controlling user clipping. code:ClipDistance is an array such that the i^th^ element of the array specifies the clip distance for plane i. A clip distance of 0 means the vertex is on the plane, a positive distance means the vertex is inside the clip half-space, and a negative distance means the point is outside the clip half-space. + The code:ClipDistance decoration must: be used only within vertex, fragment, tessellation control, tessellation evaluation, and geometry shaders. + In vertex shaders, any variable decorated with code:ClipDistance must: be declared using the output storage class. + In fragment shaders, any variable decorated with code:ClipDistance must: be declared using the input storage class. + In tessellation control, tessellation evaluation, or geometry shaders, any variable decorated with code:ClipDistance must: not be in a storage class other than input or output. + Any variable decorated with code:ClipDistance must: be declared as an array of 32-bit floating-point values. [NOTE] .Note ==== The array variable decorated with code:ClipDistance is explicitly sized by the shader. ==== [NOTE] .Note ==== In the last vertex processing stage, these values will be linearly interpolated across the primitive and the portion of the primitive with interpolated distances less than 0 will be considered outside the clip volume. If code:ClipDistance is then used by a fragment shader, code:ClipDistance contains these linearly interpolated values. ==== code:CullDistance:: Decorating a variable with the code:CullDistance built-in decoration will make that variable contain the mechanism for controlling user culling. If any member of this array is assigned a negative value for all vertices belonging to a primitive, then the primitive is discarded before rasterization. + The code:CullDistance decoration must: be used only within vertex, fragment, tessellation control, tessellation evaluation, and geometry shaders. + In vertex shaders, any variable decorated with code:CullDistance must: be declared using the output storage class. + In fragment shaders, any variable decorated with code:CullDistance must: be declared using the input storage class. + In tessellation control, tessellation evaluation, or geometry shaders, any variable decorated with code:CullDistance must: not be declared in a storage class other than input or output. + Any variable decorated with code:CullDistance must: be declared as an array of 32-bit floating-point values. [NOTE] .Note ==== In fragment shaders, the values of the code:CullDistance array are linearly interpolated across each primitive. ==== [NOTE] .Note ==== If code:CullDistance decorates an input variable, that variable will contain the corresponding value from the code:CullDistance decorated output variable from the previous shader stage. ==== code:FragCoord:: Decorating a variable with the code:FragCoord built-in decoration will make that variable contain the framebuffer coordinate latexmath:[$(x,y,z,\frac{1}{w})$] of the fragment being processed. The latexmath:[$(x,y)$] coordinate latexmath:[$(0,0)$] is the upper left corner of the upper left pixel in the framebuffer. + When sample shading is enabled, the latexmath:[$x$] and latexmath:[$y$] components of code:FragCoord reflect the location of the sample corresponding to the shader invocation. + When sample shading is not enabled, the x and y components of code:FragCoord reflect the location of the center of the pixel, latexmath:[$(0.5,0.5)$]. + The latexmath:[$z$] component of code:FragCoord is the interpolated depth value of the primitive. + The latexmath:[$w$] component is the interpolated latexmath:[$\frac{1}{w}$]. + The code:FragCoord decoration must: be used only within fragment shaders. + The variable decorated with code:FragCoord must: be declared using the input storage class. + The code:Centroid interpolation decoration is ignored on code:FragCoord. + The variable decorated with code:FragCoord must: be declared as a four-component vector of 32-bit floating-point values. code:FragDepth:: Decorating a variable with the code:FragDepth built-in decoration will make that variable contain the new depth value for all samples covered by the fragment. This value will be used for depth testing and, if the depth test passes, any subsequent write to the depth/stencil attachment. + To write to code:FragDepth, a shader must: declare the code:DepthReplacing execution mode. If a shader declares the code:DepthReplacing execution mode and there is an execution path through the shader that does not set code:FragDepth, then the fragment's depth value is undefined for executions of the shader that take that path. + The code:FragDepth decoration must: be used only within fragment shaders. + The variable decorated with code:FragDepth must: be declared using the output storage class. + The variable decorated with code:FragDepth must: be declared as a scalar 32-bit floating-point value. code:FrontFacing:: Decorating a variable with the code:FrontFacing built-in decoration will make that variable contain whether a primitive is front or back facing. This variable is non-zero if the current fragment is considered to be part of a <> primitive and is zero if the fragment is considered to be part of a back-facing primitive. + The code:FrontFacing decoration must: be used only within fragment shaders. + The variable decorated with code:FrontFacing must: be declared using the input storage class. + The variable decorated with code:FrontFacing must: be declared as a boolean. code:GlobalInvocationId:: Decorating a variable with the code:GlobalInvocationId built-in decoration will make that variable contain the location of the current invocation within the global workgroup. Each component is equal to the index of the local workgroup multiplied by the size of the local workgroup plus code:LocalInvocationId. + The code:GlobalInvocationId decoration must: be used only within compute shaders. + The variable decorated with code:GlobalInvocationId must: be declared using the input storage class. + The variable decorated with code:GlobalInvocationId must: be declared as a three-component vector of 32-bit integers. code:HelperInvocation:: Decorating a variable with the code:HelperInvocation built-in decoration will make that variable contain whether the current invocation is a helper invocation. This variable is non-zero if the current fragment being shaded is a helper invocation and zero otherwise. A helper invocation is an invocation of the shader that is produced to satisfy internal requirements such as the generation of derivatives. + The code:HelperInvocation decoration must: be used only within fragment shaders. + The variable decorated with code:HelperInvocation must: be declared using the input storage class. + The variable decorated with code:HelperInvocation must: be declared as a boolean. [NOTE] .Note ==== It is very likely that a helper invocation will have a value of code:SampleMask fragment shader input value that is zero. ==== code:InvocationId:: Decorating a variable with the code:InvocationId built-in decoration will make that variable contain the index of the current shader invocation in a geometry shader, or the index of the output patch vertex in a tessellation control shader. + In a geometry shader, the index of the current shader invocation ranges from zero to the number of <> declared in the shader minus one. If the instance count of the geometry shader is one or is not specified, then code:InvocationId will be zero. + The code:InvocationId decoration must: be used only within tessellation control and geometry shaders. + The variable decorated with code:InvocationId must: be declared using the input storage class. + The variable decorated with code:InvocationId must: be declared as a scalar 32-bit integer. code:InstanceIndex:: Decorating a variable with the code:InstanceIndex built-in decoration will make that variable contain the index of the instance that is being processed by the current vertex shader invocation. code:InstanceIndex begins at the pname:firstInstance parameter to flink:vkCmdDraw or flink:vkCmdDrawIndexed or at the pname:firstInstance member of a structure consumed by flink:vkCmdDrawIndirect or flink:vkCmdDrawIndexedIndirect. + The code:InstanceIndex decoration must: be used only within vertex shaders. + The variable decorated with code:InstanceIndex must: be declared using the input storage class. + The variable decorated with code:InstanceIndex must: be declared as a scalar 32-bit integer. code:Layer:: Decorating a variable with the code:Layer built-in decoration will make that variable contain the select layer of a multi-layer framebuffer attachment. + In a geometry shader, any variable decorated with code:Layer can be written with the framebuffer layer index to which the primitive produced by the geometry shader will be directed. If a geometry shader entry-point's interface does not include a variable decorated with code:Layer, then the first layer is used. If a geometry shader entry-point's interface includes a variable decorated with code:Layer, it must: write the same value to code:Layer for all output vertices of a given primitive. + In a fragment shader, a variable decorated with code:Layer contains the layer index of the primitive that the fragment invocation belongs to. + The code:Layer decoration must: be used only within geometry and fragment shaders. + In a geometry shader, any variable decorated with code:Layer must: be declared using the output storage class. + In a fragment shader, any variable decorated with code:Layer must: be declared using the input storage class. + Any variable decorated with code:Layer must: be declared as a scalar 32-bit integer. code:LocalInvocationId:: Decorating a variable with the code:LocalInvocationId built-in decoration will make that variable contain the location of the current compute shader invocation within the local workgroup. Each component ranges from zero through to the size of the workgroup in that dimension minus one. + The code:LocalInvocationId decoration must: be used only within compute shaders. + The variable decorated with code:LocalInvocationId must: be declared using the input storage class. + The variable decorated with code:LocalInvocationId must: be declared as a three-component vector of 32-bit integers. [NOTE] .Note ==== If the size of the workgroup in a particular dimension is one, then the code:LocalInvocationId in that dimension will be zero. If the workgroup is effectively two-dimensional, then code:LocalInvocationId.z will be zero. If the workgroup is effectively one-dimensional, then both code:LocalInvocationId.y and code:LocalInvocationId.z will be zero. ==== code:NumWorkgroups:: Decorating a variable with the code:NumWorkgroups built-in decoration will make that variable contain the number of local workgroups that are part of the dispatch that the invocation belongs to. Each component is equal to the values of the parameters passed into flink:vkCmdDispatch or read from the sname:VkDispatchIndirectCommand structure read through a call to flink:vkCmdDispatchIndirect. + The code:NumWorkgroups decoration must: be used only within compute shaders. + The variable decorated with code:NumWorkgroups must: be declared using the input storage class. + The variable decorated with code:NumWorkgroups must: be declared as a three-component vector of 32-bit integers. code:PatchVertices:: Decorating a variable with the code:PatchVertices built-in decoration will make that variable contain the number of vertices in the input patch being processed by the shader. A single tessellation control or tessellation evaluation shader can: read patches of differing sizes, so the value of the code:PatchVertices variable may: differ between patches. + The code:PatchVertices decoration must: be used only within tessellation control and tessellation evaluation shaders. + The variable decorated with code:PatchVertices must: be declared using the input storage class. + The variable decorated with code:PatchVertices must: be declared as scalar 32-bit integer. code:PointCoord:: Decorating a variable with the code:PointCoord built-in decoration will make that variable contain the coordinate of the current fragment within the point being rasterized, normalized to the size of the point with origin in the upper left corner of the point, as described in <>. If the primitive the fragment shader invocation belongs to is not a point, then the variable decorated with code:PointCoord contains an undefined value. + The code:PointCoord decoration must: be used only within fragment shaders. + The variable decorated with code:PointCoord must: be declared using the input storage class. + The variable decorated with code:PointCoord must: be declared as two-component vector of 32-bit floating-point values. [NOTE] .Note ==== Depending on how the point is rasterized, code:PointCoord may: never reach latexmath:[$(0,0)$] or latexmath:[$(1,1)$]. ==== code:PointSize:: Decorating a variable with the code:PointSize built-in decoration will make that variable contain the size of point primitives. The value written to the variable decorated with code:PointSize by the last vertex processing stage in the pipeline is used as the framebuffer-space size of points produced by rasterization. + The code:PointSize decoration must: be used only within vertex, tessellation control, tessellation evaluation, and geometry shaders. + In a vertex shader, any variable decorated with code:PointSize must: be declared using the output storage class. + In a tessellation control, tessellation evaluation, or geometry shader, any variable decorated with code:PointSize must: be declared using either the input or output storage class. + Any variable decorated with code:PointSize must: be declared as a scalar 32-bit floating-point value. [NOTE] .Note ==== When code:PointSize decorates a variable in the input storage class, it contains the data written to the output variable decorated with code:PointSize from the previous shader stage. ==== code:Position:: Decorating a variable with the code:Position built-in decoration will make that variable contain the position of the current vertex. In the last vertex processing stage, the value of the variable decorated with code:Position is used in subsequent primitive assembly, clipping, and rasterization operations. + The code:Position decoration must: be used only within vertex, tessellation control, tessellation evaluation, and geometry shaders. + In a vertex shader, any variable decorated with code:Position must: be declared using the output storage class. + In a tessellation control, tessellation evaluation, or geometry shader, any variable decorated with code:Position must: not be declared in a storage class other than input or output. + Any variable decorated with code:Position must: be declared as a four-component vector of 32-bit floating-point values. [NOTE] .Note ==== When code:Position decorates a variable in the input storage class, it contains the data written to the output variable decorated with code:Position from the previous shader stage. ==== code:PrimitiveId:: Decorating a variable with the code:PrimitiveId built-in decoration will make that variable contain the index of the current primitive. + In tessellation control and tessellation evaluation shaders, it will contain the index of the patch within the current set of rendering primitives that correspond to the shader invocation. + In a geometry shader, it will contain the number of primitives presented as input to the shader since the current set of rendering primitives was started. + In a fragment shader, it will contain the primitive index written by the geometry shader if a geometry shader is present, or with the value that would have been presented as input to the geometry shader had it been present. + If a geometry shader is present and the fragment shader reads from an input variable decorated with code:PrimitiveId, then the geometry shader must: write to an output variable decorated with code:PrimitiveId in all execution paths. + The code:PrimitiveId decoration must: be used only within fragment, tessellation control, tessellation evaluation, and geometry shaders. + In a fragment, tessellation control or tessellation evaluation shader, any variable decorated with code:PrimitiveId must: be declared using the output storage class. + In a geometry shader, any variable decorated with code:PrimitiveId must: be declared using either the input or output storage class. + Any variable decorated with code:PrimitiveId must: be declared as scalar 32-bit integer. [NOTE] .Note ==== When the code:PrimitiveId decoration is applied to an output variable in the geometry shader, the resulting value is seen through the code:PrimitiveId decorated input variable in the fragment shader. ==== code:SampleId:: Decorating a variable with the code:SampleId built-in decoration will make that variable contain the zero-based index of the sample the invocation corresponds to. code:SampleId ranges from zero to the number of samples in the framebuffer minus one. If a fragment shader entry-point's interface includes an input variable decorated with code:SampleId, per-sample shading is enabled for draws that use that fragment shader. + The code:SampleId decoration must: be used only within fragment shaders. + The variable decorated with code:SampleId must: be declared using the input storage class. + The variable decorated with code:SampleId must: be declared as a scalar 32-bit integer. code:SampleMask:: Decorating a variable with the code:SampleMask built-in decoration will make any variable contain the sample coverage mask for the current fragment shader invocation. + A variable in the input storage class decorated with code:SampleMask will contain a bitmask of the set of samples covered by the primitive generating the fragment during rasterization. It has a sample bit set if and only if the sample is considered covered for this fragment shader invocation. code:SampleMask[] is an array of integers. Bits are mapped to samples in a manner where bit B of mask M (`SampleMask[M]`) corresponds to sample latexmath:[$32 \times M + B$]. + When state specifies multiple fragment shader invocations for a given fragment, the sample mask for any single fragment shader invocation specifies the subset of the covered samples for the fragment that correspond to the invocation. In this case, the bit corresponding to each covered sample will be set in exactly one fragment shader invocation. + A variable in the output storage class decorated with code:SampleMask is an array of integers forming a bit array in a manner similar an input variable decorated with code:SampleMask, but where each bit represents coverage as computed by the shader. Modifying the sample mask by writing zero to a bit of code:SampleMask causes the sample to be considered uncovered. However, setting sample mask bits to one will never enable samples not covered by the original primitive. If the fragment shader is being evaluated at any frequency other than per-fragment, bits of the sample mask not corresponding to the current fragment shader invocation are ignored. This array must: be sized in the fragment shader either implicitly or explicitly, to be no larger than the implementation-dependent maximum sample-mask (as an array of 32-bit elements), determined by the maximum number of samples. If a fragment shader entry-point's interface includes an output variable decorated with code:SampleMask, the sample mask will be undefined for any array elements of any fragment shader invocations that fail to assign a value. If a fragment shader entry-point's interface does not include an output variable decorated with code:SampleMask, the sample mask has no effect on the processing of a fragment. + The code:SampleMask decoration must: be used only within fragment shaders. + Any variable decorated with code:SampleMask must: be declared using either the input or output storage class. + Any variable decorated with code:SampleMask must: be declared as an array of 32-bit integers. code:SamplePosition:: Decorating a variable with the code:SamplePosition built-in decoration will make that variable contain the sub-pixel position of the sample being shaded. The top left of the pixel is considered to be at coordinate latexmath:[$(0,0)$] and the bottom right of the pixel is considered to be at coordinate latexmath:[$(1,1)$]. If a fragment shader entry-point's interface includes an input variable decorated with code:SamplePosition, per-sample shading is enabled for draws that use that fragment shader. + The code:SamplePosition decoration must: be used only within fragment shaders. + The variable decorated with code:SamplePosition must: be declared using the input storage class. + The variable decorated with code:SamplePosition must: be declared as a two-component vector of 32-bit floating-point values. code:TessCoord:: Decorating a variable with the code:TessCoord built-in decoration will make that variable contain the three-dimensional latexmath:[$(u,v,w)$] barycentric coordinate of the tessellated vertex within the patch. latexmath:[$u$], latexmath:[$v$], and latexmath:[$w$] are in the range latexmath:[$[0,1\]$] and vary linearly across the primitive being subdivided. For the tessellation modes of code:Quads or code:IsoLines, the third component is always zero. + The code:TessCoord decoration must: be used only within tessellation evaluation shaders. + The variable decorated with code:TessCoord must: be declared using the input storage class. + The variable decorated with code:TessCoord must: be declared as three-component vector of 32-bit floating-point values. code:TessLevelOuter:: Decorating a variable with the code:TessLevelOuter built-in decoration will make that variable contain the outer tessellation levels for the current patch. + In tessellation control shaders, the variable decorated with code:TessLevelOuter can: be written to which controls the tessellation factors for the resulting patch. These values are used by the tessellator to control primitive tessellation and can: be read by tessellation evaluation shaders. + In tessellation evaluation shaders, the variable decorated with code:TessLevelOuter can: read the values written by the tessellation control shader. + The code:TessLevelOuter decoration must: be used only within tessellation control and tessellation evaluation shaders. + In a tessellation control shader, any variable decorated with code:TessLevelOuter must: be declared using the output storage class. + In a tessellation evaluation shader, any variable decorated with code:TessLevelOuter must: be declared using the input storage class. + Any variable decorated with code:TessLevelOuter must: be declared as an array of size four, containing 32-bit floating-point values. code:TessLevelInner:: Decorating a variable with the code:TessLevelInner built-in decoration will make that variable contain the inner tessellation levels for the current patch. + In tessellation control shaders, the variable decorated with code:TessLevelInner can: be written to, which controls the tessellation factors for the resulting patch. These values are used by the tessellator to control primitive tessellation and can: be read by tessellation evaluation shaders. + In tessellation evaluation shaders, the variable decorated with code:TessLevelInner can: read the values written by the tessellation control shader. + The code:TessLevelInner decoration must: be used only within tessellation control and tessellation evaluation shaders. + In a tessellation control shader, any variable decorated with code:TessLevelInner must: be declared using the output storage class. + In a tessellation evaluation shader, any variable decorated with code:TessLevelInner must: be declared using the input storage class. + Any variable decorated with code:TessLevelInner must: be declared as an array of size two, containing 32-bit floating-point values. code:VertexIndex:: Decorating a variable with the code:VertexIndex built-in decoration will make that variable contain the index of the vertex that is being processed by the current vertex shader invocation. For non-indexed draws, this variable begins at the pname:firstVertex parameter to flink:vkCmdDraw or the pname:firstVertex member of a structure consumed by flink:vkCmdDrawIndirect and increments by one for each vertex in the draw. For indexed draws, its value is the content of the index buffer for the vertex plus the pname:vertexOffset parameter to flink:vkCmdDrawIndexed or the pname:vertexOffset member of the structure consumed by flink:vkCmdDrawIndexedIndirect. + The code:VertexIndex decoration must: be used only within vertex shaders. + The variable decorated with code:VertexIndex must: be declared using the input storage class. + The variable decorated with code:VertexIndex must: be declared as a scalar 32-bit integer. [NOTE] .Note ==== code:VertexIndex starts at the same starting value for each instance. ==== code:ViewportIndex:: Decorating a variable with the code:ViewportIndex built-in decoration will make that variable contain the index of the viewport. + In a geometry shader, the variable decorated with code:ViewportIndex can be written to with the viewport index to which the primitive produced by the geometry shader will be directed. The selected viewport index is used to select the viewport transform and scissor rectangle. If a geometry shader entry-point's interface does not include a variable decorated with code:ViewportIndex, then the first viewport is used. If a geometry shader entry-point's interface includes a variable decorated with code:ViewportIndex, it must: write the same value to code:ViewportIndex for all output vertices of a given primitive. + In a fragment shader, the variable decorated with code:ViewportIndex contains the viewport index of the primitive that the fragment invocation belongs to. + The code:ViewportIndex decoration must: be used only within geometry and fragment shaders. + In a geometry shader, any variable decorated with code:ViewportIndex must: be declared using the output storage class. + In a fragment shader, any variable decorated with code:ViewportIndex must: be declared using the input storage class. + Any variable decorated with code:ViewportIndex must: be declared as a scalar 32-bit integer. code:WorkgroupId:: Decorating a variable with the code:WorkgroupId built-in decoration will make that variable contain the global workgroup that the current invocation is a member of. Each component ranges from zero to the values of the parameters passed into flink:vkCmdDispatch or read from the sname:VkDispatchIndirectCommand structure read through a call to flink:vkCmdDispatchIndirect. + The code:WorkgroupId decoration must: be used only within compute shaders. + The variable decorated with code:WorkgroupId must: be declared using the input storage class. + The variable decorated with code:WorkgroupId must: be declared as a three-component vector of 32-bit integers. code:WorkgroupSize:: Decorating a variable with the code:WorkgroupSize built-in decoration will make that variable contain the dimensions of a local workgroup. If an object is decorated with the code:WorkgroupSize decoration, this must: take precedence over any execution mode set for code:LocalSize. + The code:WorkgroupSize decoration must: be used only within compute shaders. + The object decorated with code:WorkgroupSize must: be a specialization constant or a constant. + The object decorated with code:WorkgroupSize must: be declared as a three-component vector of 32-bit integers.