// Copyright (c) 2015-2016 The Khronos Group Inc. // Copyright notice at https://www.khronos.org/registry/speccopyright.html [[drawing]] = Drawing Commands _Drawing commands_ (commands with ftext:Draw in the name) provoke work in a graphics pipeline. Drawing commands are recorded into a command buffer and when executed by a queue, will produce work which executes according to the currently bound graphics pipeline. A graphics pipeline must: be bound to a command buffer before any drawing commands are recorded in that command buffer. // refBegin VkPipelineInputAssemblyStateCreateInfo - Structure specifying parameters of a newly created pipeline input assembly state Each draw is made up of zero or more vertices and zero or more instances, which are processed by the device and result in the assembly of primitives. Primitives are assembled according to the pname:pInputAssemblyState member of the sname:VkGraphicsPipelineCreateInfo structure, which is of type sname:VkPipelineInputAssemblyStateCreateInfo: include::../api/structs/VkPipelineInputAssemblyStateCreateInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is reserved for future use. * pname:topology is a elink:VkPrimitiveTopology defining the primitive topology, as described below. * pname:primitiveRestartEnable controls whether a special vertex index value is treated as restarting the assembly of primitives. This enable only applies to indexed draws (flink:vkCmdDrawIndexed and flink:vkCmdDrawIndexedIndirect), and the special index value is either 0xFFFFFFFF when the pname:indexType parameter of fname:vkCmdBindIndexBuffer is equal to ename:VK_INDEX_TYPE_UINT32, or 0xFFFF when pname:indexType is equal to ename:VK_INDEX_TYPE_UINT16. Primitive restart is not allowed for ``list'' topologies. Restarting the assembly of primitives discards the most recent index values if those elements formed an incomplete primitive, and restarts the primitive assembly using the subsequent indices, but only assembling the immediately following element through the end of the originally specified elements. The primitive restart index value comparison is performed before adding the pname:vertexOffset value to the index value. include::../validity/structs/VkPipelineInputAssemblyStateCreateInfo.txt[] [[drawing-primitive-topologies]] == Primitive Topologies // refBegin VkPrimitiveTopology supported primitive topologies _Primitive topology_ determines how consecutive vertices are organized into primitives, and determines the type of primitive that is used at the beginning of the graphics pipeline. The effective topology for later stages of the pipeline is altered by tessellation or geometry shading (if either is in use) and depends on the execution modes of those shaders. Supported topologies are defined by elink:VkPrimitiveTopology and include: include::../api/enums/VkPrimitiveTopology.txt[] // refEnd VkPrimitiveTopology Each primitive topology, and its construction from a list of vertices, is summarized below. === Points A series of individual points are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_POINT_LIST. Each vertex defines a separate point. === Separate Lines Individual line segments, each defined by a pair of vertices, are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST. The first two vertices define the first segment, with subsequent pairs of vertices each defining one more segment. If the number of vertices is odd, then the last vertex is ignored. === Line Strips A series of one or more connected line segments are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP. In this case, the first vertex specifies the first segment's start point while the second vertex specifies the first segment's endpoint and the second segment's start point. In general, the latexmath:[$i$]th vertex (for latexmath:[$i > 0$]) specifies the beginning of the latexmath:[$i$]th segment and the end of the latexmath:[$i-1$]st. The last vertex specifies the end of the last segment. If only one vertex is specified, then no primitive is generated. === Triangle Strips A triangle strip is a series of triangles connected along shared edges, and is specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP. In this case, the first three vertices define the first triangle, and their order is significant. Each subsequent vertex defines a new triangle using that point along with the last two vertices from the previous triangle, as shown in figure <>. If fewer than three vertices are specified, no primitive is produced. The order of vertices in successive triangles changes as shown in the figure, so that all triangle faces have the same orientation. [[fig-triangles]] image::images/triangles.{svgpdf}[align="center",title="Triangle strips, fans, and lists",{fullimagewidth}] ifdef::editing-notes[] [NOTE] .editing-note ==== TODO: Add full caption: * (a) A triangle strip. * (b) A triangle fan. * (c) Independent triangles. The numbers give the sequencing of the vertices in order within the vertex arrays. Note that in (a) and (b) triangle edge ordering is determined by the first triangle, while in (c) the order of each triangle's edges is independent of the other triangles. ==== endif::editing-notes[] === Triangle Fans A triangle fan is specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN. It is similar to a triangle strip, but changes the vertex replaced from the previous triangle as shown in figure <>, so that all triangles in the fan share a common vertex. === Separate Triangles Separate triangles are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST, as shown in figure <>. In this case, vertices latexmath:[$3i$], latexmath:[$3i+1$], and latexmath:[$3i+2$] vertices (in that order) determine a triangle for each latexmath:[$i=0,1,\ldots,n-1$], where there are latexmath:[$3n+k$] vertices drawn. latexmath:[$k$] is either 0, 1, or 2; if latexmath:[$k$] is not zero, the final latexmath:[$k$] vertices are ignored. === Lines With Adjacency Lines with adjacency are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY, and are independent line segments where each endpoint has a corresponding _adjacent_ vertex that is accessible in a <>. If a geometry shader is not active, the adjacent vertices are ignored. A line segment is drawn from the latexmath:[$4 i+1$]st vertex to the latexmath:[$4 i+2$]nd vertex for each latexmath:[$i=0,1,\ldots, n-1$], where there are latexmath:[$4 n+k$] vertices. latexmath:[$k$] is either 0, 1, 2, or 3; if latexmath:[$k$] is not zero, the final latexmath:[$k$] vertices are ignored. For line segment latexmath:[$i$], the latexmath:[$4 i$]th and latexmath:[$4 i+3$]rd vertices are considered adjacent to the latexmath:[$4 i+1$]st and latexmath:[$4 i+2$]nd vertices, respectively, as shown in figure <>. [[fig-lineadj]] image::images/lineadj.{svgpdf}[align="center",title="Lines with adjacency",{fullimagewidth}] ifdef::editing-notes[] [NOTE] .editing-note ==== TODO: Add full caption: Lines with adjacency (a) and line strips with adjacency (b). The vertices connected with solid lines belong to the main primitives; the vertices connected by dashed lines are the adjacent vertices that are accessible in a geometry shader. ==== endif::editing-notes[] === Line Strips With Adjacency Line strips with adjacency are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY and are similar to line strips, except that each line segment has a pair of adjacent vertices that are accessible in a geometry shader. If a geometry shader is not active, the adjacent vertices are ignored. A line segment is drawn from the latexmath:[$i+1$]st vertex to the latexmath:[$i+2$]nd vertex for each latexmath:[$i=0,1,\ldots, n-1$], where there are latexmath:[$n+3$] vertices. If there are fewer than four vertices, all vertices are ignored. For line segment latexmath:[$i$], the latexmath:[$i$]th and latexmath:[$i+3$]rd vertex are considered adjacent to the latexmath:[$i+1$]st and latexmath:[$i+2$]nd vertices, respectively, as shown in figure <>. === Triangle List With Adjacency Triangles with adjacency are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY, and are similar to separate triangles except that each triangle edge has an adjacent vertex that is accessible in a geometry shader. If a geometry shader is not active, the adjacent vertices are ignored. The latexmath:[$6i$]th, latexmath:[$6i+2$]nd, and latexmath:[$6i+4$]th vertices (in that order) determine a triangle for each latexmath:[$i=0,1, \ldots, n-1$], where there are latexmath:[$6 n+k$] vertices. latexmath:[$k$] is either 0, 1, 2, 3, 4, or 5; if latexmath:[$k$] is non-zero, the final latexmath:[$k$] vertices are ignored. For triangle latexmath:[$i$], the latexmath:[$6 i+1$]st, latexmath:[$6 i+3$]rd, and latexmath:[$6 i+5$]th vertices are considered adjacent to edges from the latexmath:[$6 i$]th to the latexmath:[$6 i+2$]nd, from the latexmath:[$6 i+2$]nd to the latexmath:[$6 i+4$]th, and from the latexmath:[$6 i+4$]th to the latexmath:[$6 i$]th vertices, respectively, as shown in figure <>. [[fig-triadj]] image::images/triadj.{svgpdf}[align="center",title="Triangles with adjacency",{fullimagewidth}] ifdef::editing-notes[] [NOTE] .editing-note ==== TODO: Add full caption: Triangles with adjacency. The vertices connected with solid lines belong to the main primitive; the vertices connected by dashed lines are the adjacent vertices that are accessible in a geometry shader.} ==== endif::editing-notes[] === Triangle Strips With Adjacency Triangle strips with adjacency are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY, and are similar to triangle strips except that each triangle edge has an adjacent vertex that is accessible in a geometry shader. If a geometry shader is not active, the adjacent vertices are ignored. In triangle strips with adjacency, latexmath:[$n$] triangles are drawn where there are latexmath:[$2(n+2)+k$] vertices. latexmath:[$k$] is either 0 or 1; if latexmath:[$k$] is 1, the final vertex is ignored. If there are fewer than 6 vertices, the entire primitive is ignored. Table <> describes the vertices and order used to draw each triangle, and which vertices are considered adjacent to each edge of the triangle, as shown in figure <>. [[trigenadj]] .Triangles generated by triangle strips with adjacency. [options="header", cols="2,1,1,1,1,1,1"] |==== | 3+| Primitive Vertices 3+| Adjacent Vertices | Primitive | 1st | 2nd | 3rd | 1/2 | 2/3 | 3/1 | only (latexmath:[$i=0$], latexmath:[$n=1$]) | 0 | 2 | 4 | 1 | 5 | 3 | first (latexmath:[$i=0$]) | 0 | 2 | 4 | 1 | 6 | 3 | middle (latexmath:[$i$] odd) | latexmath:[$2 i+2$] | latexmath:[$2 i $] | latexmath:[$2 i+4$] | latexmath:[$2 i-2$] | latexmath:[$2 i+3$] | latexmath:[$2 i+6$] | middle (latexmath:[$i$] even) | latexmath:[$2 i $] | latexmath:[$2 i+2$] | latexmath:[$2 i+4$] | latexmath:[$2 i-2$] | latexmath:[$2 i+6$] | latexmath:[$2 i+3$] | last (latexmath:[$i=n-1$], latexmath:[$i$] odd) | latexmath:[$2 i+2$] | latexmath:[$2 i $] | latexmath:[$2 i+4$] | latexmath:[$2 i-2$] | latexmath:[$2 i+3$] | latexmath:[$2 i+5$] | last (latexmath:[$i=n-1$], latexmath:[$i$] even)| latexmath:[$2 i $] | latexmath:[$2 i+2$] | latexmath:[$2 i+4$] | latexmath:[$2 i-2$] | latexmath:[$2 i+5$] | latexmath:[$2 i+3$] |==== ifdef::editing-notes[] [NOTE] .editing-note ==== TODO: Add full caption: Triangles generated by triangle strips with adjacency. Each triangle is drawn using the vertices whose numbers are in the *1st*, *2nd*, and *3rd* columns under *primitive vertices*, in that order. The vertices in the 1/2, 2/3, and 3/1 columns under *adjacent vertices* are considered adjacent to the edges from the first to the second, from the second to the third, and from the third to the first vertex of the triangle, respectively. The six rows correspond to six cases: the first and only triangle latexmath:[$(i=0, n=1)$], the first triangle of several latexmath:[$(i=0, n>0)$], ``odd'' middle triangles latexmath:[$(i=1,3,5 \ldots)$], ``even'' middle triangles latexmath:[$(i=2,4,6,\ldots)$], and special cases for the last triangle, when latexmath:[$i$] is either even or odd. For the purposes of this table, both the first vertex and first triangle are numbered latexmath:[$0$]. ==== endif::editing-notes[] [[fig-tstripadj]] image::images/tstripadj.{svgpdf}[align="center",title="Triangle strips with adjacency",width="{svgpdf@pdf:400:800}"] ifdef::editing-notes[] [NOTE] .editing-note ==== TODO: Add full caption: Triangle strips with adjacency. The vertices connected with solid lines belong to the main primitives; the vertices connected by dashed lines are the adjacent vertices that are accessible in a geometry shader. ==== endif::editing-notes[] [[drawing-primitive-topologies-patches]] === Separate Patches Separate patches are specified with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST. A patch is an ordered collection of vertices used for <>. The vertices comprising a patch have no implied geometric ordering, and are used by tessellation shaders and the fixed-function tessellator to generate new point, line, or triangle primitives. Each patch in the series has a fixed number of vertices, specified by the pname:patchControlPoints member of the slink:VkPipelineTessellationStateCreateInfo structure passed to flink:vkCreateGraphicsPipelines. Once assembled and vertex shaded, these patches are provided as input to the tessellation control shader stage. If the number of vertices in a patch is given by latexmath:[$v$], the latexmath:[$v i$]th through latexmath:[$v i+v-1$]st vertices (in that order) determine a patch for each latexmath:[$i=0,1,\dots n-1$], where there are latexmath:[$v n+k$] vertices. latexmath:[$k$] is in the range latexmath:[$[0,v-1\]$]; if latexmath:[$k$] is not zero, the final latexmath:[$k$] vertices are ignored. === General Considerations For Polygon Primitives Depending on the <>, a _polygon primitive_ generated from a drawing command with pname:topology ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN, ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP, ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST, ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY, or ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY is rendered in one of several ways, such as outlining its border or filling its interior. The order of vertices in such a primitive is significant during <> and <>. == Programmable Primitive Shading Once primitives are assembled, they proceed to the vertex shading stage of the pipeline. If the draw includes multiple instances, then the set of primitives is sent to the vertex shading stage multiple times, once for each instance. It is undefined whether vertex shading occurs on vertices that are discarded as part of incomplete primitives, but if it does occur then it operates as if they were vertices in complete primitives and such invocations can: have side effects. Vertex shading receives two per-vertex inputs from the primitive assembly stage - the code:vertexIndex and the code:instanceIndex. How these values are generated is defined below, with each command. Drawing commands fall roughly into two categories: * Non-indexed drawing commands present a sequential code:vertexIndex to the vertex shader. The sequential index is generated automatically by the device (see <> for details on both specifying the vertex attributes indexed by code:vertexIndex, as well as binding vertex buffers containing those attributes to a command buffer). These commands are: ** flink:vkCmdDraw ** flink:vkCmdDrawIndirect ifdef::VK_AMD_draw_indirect_count[] ** flink:vkCmdDrawIndirectCountAMD. endif::VK_AMD_draw_indirect_count[] * Indexed drawing commands read index values from an _index buffer_ and use this to compute the code:vertexIndex value for the vertex shader. These commands are: ** flink:vkCmdDrawIndexed ** flink:vkCmdDrawIndexedIndirect ifdef::VK_AMD_draw_indirect_count[] ** flink:vkCmdDrawIndexedIndirectCountAMD. endif::VK_AMD_draw_indirect_count[] // refBegin vkCmdBindIndexBuffer Bind an index buffer to a command buffer. To bind an index buffer to a command buffer, call: include::../api/protos/vkCmdBindIndexBuffer.txt[] * pname:commandBuffer is the command buffer into which the command is recorded. * pname:buffer is the buffer being bound. * pname:offset is the starting offset in bytes within pname:buffer used in index buffer address calculations. * pname:indexType selects whether indices are treated as 16 bits or 32 bits. Possible values include: + -- // refBegin VkIndexType - type of index buffer indices include::../api/enums/VkIndexType.txt[] -- include::../validity/protos/vkCmdBindIndexBuffer.txt[] The parameters for each drawing command are specified directly in the command or read from buffer memory, depending on the command. Drawing commands that source their parameters from buffer memory are known as _indirect_ drawing commands. All drawing commands interact with the <> feature. [[drawing-primitive-assembly-apiorder]] Primitives assembled by draw commands are considered to have an <>, which defines the order their fragments affect the framebuffer. When a draw command includes multiple instances, the lower numbered instances are earlier in API order. For non-indexed draws, primitives with lower numbered code:vertexIndex values are earlier in API order. For indexed draws, primitives assembled from lower index buffer addresses are earlier in API order. // refBegin vkCmdDraw Draw primitives. To record a non-indexed draw, call: include::../api/protos/vkCmdDraw.txt[] * pname:commandBuffer is the command buffer into which the command is recorded. * pname:vertexCount is the number of vertices to draw. * pname:instanceCount is the number of instances to draw. * pname:firstVertex is the index of the first vertex to draw. * pname:firstInstance is the instance ID of the first instance to draw. When the command is executed, primitives are assembled using the current primitive topology and pname:vertexCount consecutive vertex indices with the first code:vertexIndex value equal to pname:firstVertex. The primitives are drawn pname:instanceCount times with code:instanceIndex starting with pname:firstInstance and increasing sequentially for each instance. The assembled primitives execute the currently bound graphics pipeline. include::../validity/protos/vkCmdDraw.txt[] // refBegin vkCmdDrawIndexed Issue an indexed draw into a command buffer. To record an indexed draw, call: include::../api/protos/vkCmdDrawIndexed.txt[] * pname:commandBuffer is the command buffer into which the command is recorded. * pname:indexCount is the number of vertices to draw. * pname:instanceCount is the number of instances to draw. * pname:firstIndex is the base index within the index buffer. * pname:vertexOffset is the value added to the vertex index before indexing into the vertex buffer. * pname:firstInstance is the instance ID of the first instance to draw. When the command is executed, primitives are assembled using the current primitive topology and pname:indexCount vertices whose indices are retrieved from the index buffer. The index buffer is treated as an array of tightly packed unsigned integers of size defined by the flink:vkCmdBindIndexBuffer::pname:indexType parameter with which the buffer was bound. The first vertex index is at an offset of pname:firstIndex * code:indexSize + pname:offset within the currently bound index buffer, where pname:offset is the offset specified by fname:vkCmdBindIndexBuffer and code:indexSize is the byte size of the type specified by pname:indexType. Subsequent index values are retrieved from consecutive locations in the index buffer. Indices are first compared to the primitive restart value, then zero extended to 32 bits (if the code:indexType is ename:VK_INDEX_TYPE_UINT16) and have pname:vertexOffset added to them, before being supplied as the code:vertexIndex value. The primitives are drawn pname:instanceCount times with code:instanceIndex starting with pname:firstInstance and increasing sequentially for each instance. The assembled primitives execute the currently bound graphics pipeline. include::../validity/protos/vkCmdDrawIndexed.txt[] // refBegin vkCmdDrawIndirect Issue an indirect draw into a command buffer. To record a non-indexed indirect draw, call: include::../api/protos/vkCmdDrawIndirect.txt[] * pname:commandBuffer is the command buffer into which the command is recorded. * pname:buffer is the buffer containing draw parameters. * pname:offset is the byte offset into pname:buffer where parameters begin. * pname:drawCount is the number of draws to execute, and can: be zero. * pname:stride is the byte stride between successive sets of draw parameters. fname:vkCmdDrawIndirect behaves similarly to flink:vkCmdDraw except that the parameters are read by the device from a buffer during execution. pname:drawCount draws are executed by the command, with parameters taken from pname:buffer starting at pname:offset and increasing by pname:stride bytes for each successive draw. The parameters of each draw are encoded in an array of slink:VkDrawIndirectCommand structures. If pname:drawCount is less than or equal to one, pname:stride is ignored. include::../validity/protos/vkCmdDrawIndirect.txt[] // refBegin VkDrawIndirectCommand - Structure specifying a draw indirect command The sname:VkDrawIndirectCommand structure is defined as: include::../api/structs/VkDrawIndirectCommand.txt[] * pname:vertexCount is the number of vertices to draw. * pname:instanceCount is the number of instances to draw. * pname:firstVertex is the index of the first vertex to draw. * pname:firstInstance is the instance ID of the first instance to draw. The members of sname:VkDrawIndirectCommand have the same meaning as the similarly named parameters of flink:vkCmdDraw. include::../validity/structs/VkDrawIndirectCommand.txt[] // refEnd VkDrawIndirectCommand vkCmdDrawIndirect ifdef::VK_AMD_draw_indirect_count[] // refBegin vkCmdDrawIndirectCountAMD Perform an indirect draw with the draw count sourced from a buffer. To record a non-indexed draw call with a draw call count sourced from a buffer, call: include::../api/protos/vkCmdDrawIndirectCountAMD.txt[] * pname:commandBuffer is the command buffer into which the command is recorded. * pname:buffer is the buffer containing draw parameters. * pname:offset is the byte offset into pname:buffer where parameters begin. * pname:countBuffer is the buffer containing the draw count. * pname:countBufferOffset is the byte offset into pname:countBuffer where the draw count begins. * pname:maxDrawCount specifies the maximum number of draws that will be executed. The actual number of executed draw calls is the minimum of the count specified in pname:countBuffer and pname:maxDrawCount. * pname:stride is the byte stride between successive sets of draw parameters. fname:vkCmdDrawIndirectCountAMD behaves similar to flink:vkCmdDrawIndirect except that the draw count is read by the device from a buffer during execution. The command will read an unsigned 32-bit integer from pname:countBuffer located at pname:countBufferOffset and use this as the draw count. include::../validity/protos/vkCmdDrawIndirectCountAMD.txt[] // refEnd vkCmdDrawIndirectCountAMD endif::VK_AMD_draw_indirect_count[] // refBegin vkCmdDrawIndexedIndirect Perform an indexed indirect draw. To record an indexed indirect draw, call: include::../api/protos/vkCmdDrawIndexedIndirect.txt[] * pname:commandBuffer is the command buffer into which the command is recorded. * pname:buffer is the buffer containing draw parameters. * pname:offset is the byte offset into pname:buffer where parameters begin. * pname:drawCount is the number of draws to execute, and can: be zero. * pname:stride is the byte stride between successive sets of draw parameters. fname:vkCmdDrawIndexedIndirect behaves similarly to flink:vkCmdDrawIndexed except that the parameters are read by the device from a buffer during execution. pname:drawCount draws are executed by the command, with parameters taken from pname:buffer starting at pname:offset and increasing by pname:stride bytes for each successive draw. The parameters of each draw are encoded in an array of slink:VkDrawIndexedIndirectCommand structures. If pname:drawCount is less than or equal to one, pname:stride is ignored. include::../validity/protos/vkCmdDrawIndexedIndirect.txt[] // refBegin VkDrawIndexedIndirectCommand - Structure specifying a draw indexed indirect command The sname:VkDrawIndexedIndirectCommand structure is defined as: include::../api/structs/VkDrawIndexedIndirectCommand.txt[] * pname:indexCount is the number of vertices to draw. * pname:instanceCount is the number of instances to draw. * pname:firstIndex is the base index within the index buffer. * pname:vertexOffset is the value added to the vertex index before indexing into the vertex buffer. * pname:firstInstance is the instance ID of the first instance to draw. The members of sname:VkDrawIndexedIndirectCommand have the same meaning as the similarly named parameters of flink:vkCmdDrawIndexed. include::../validity/structs/VkDrawIndexedIndirectCommand.txt[] // refEnd VkDrawIndexedIndirectCommand vkCmdDrawIndexedIndirect ifdef::VK_AMD_draw_indirect_count[] // refBegin vkCmdDrawIndexedIndirectCountAMD Perform an indexed indirect draw with the draw count sourced from a buffer. To record an indexed draw call with a draw call count sourced from a buffer, call: include::../api/protos/vkCmdDrawIndexedIndirectCountAMD.txt[] * pname:commandBuffer is the command buffer into which the command is recorded. * pname:buffer is the buffer containing draw parameters. * pname:offset is the byte offset into pname:buffer where parameters begin. * pname:countBuffer is the buffer containing the draw count. * pname:countBufferOffset is the byte offset into pname:countBuffer where the draw count begins. * pname:maxDrawCount specifies the maximum number of draws that will be executed. The actual number of executed draw calls is the minimum of the count specified in pname:countBuffer and pname:maxDrawCount. * pname:stride is the byte stride between successive sets of draw parameters. fname:vkCmdDrawIndexedIndirectCountAMD behaves similar to flink:vkCmdDrawIndirectCountAMD except that the draw count is read by the device from a buffer during execution. The command will read an unsigned 32-bit integer from pname:countBuffer located at pname:countBufferOffset and use this as the draw count. include::../validity/protos/vkCmdDrawIndexedIndirectCountAMD.txt[] // refEnd vkCmdDrawIndexedIndirectCountAMD endif::VK_AMD_draw_indirect_count[]