// Copyright (c) 2015-2016 The Khronos Group Inc. // Copyright notice at https://www.khronos.org/registry/speccopyright.html [[commandbuffers]] = Command Buffers // refBegin VkCommandBuffer Opaque handle to a command buffer object Command buffers are objects used to record commands which can: be subsequently submitted to a device queue for execution. There are two levels of command buffers - _primary command buffers_, which can: execute secondary command buffers, and which are submitted to queues, and _secondary command buffers_, which can: be executed by primary command buffers, and which are not directly submitted to queues. Command buffers are represented by sname:VkCommandBuffer handles: include::../api/handles/VkCommandBuffer.txt[] // refEnd VkCommandBuffer Recorded commands include commands to bind pipelines and descriptor sets to the command buffer, commands to modify dynamic state, commands to draw (for graphics rendering), commands to dispatch (for compute), commands to execute secondary command buffers (for primary command buffers only), commands to copy buffers and images, and other commands. [[commandbuffers-statereset]] Each command buffer manages state independently of other command buffers. There is no inheritance of state across primary and secondary command buffers, or between secondary command buffers. When a command buffer begins recording, all state in that command buffer is undefined. When secondary command buffer(s) are recorded to execute on a primary command buffer, the secondary command buffer inherits no state from the primary command buffer, and all state of the primary command buffer is undefined after an execute secondary command buffer command is recorded. There is one exception to this rule - if the primary command buffer is inside a render pass instance, then the render pass and subpass state is not disturbed by executing secondary command buffers. Whenever the state of a command buffer is undefined, the application must: set all relevant state on the command buffer before any state dependent commands such as draws and dispatches are recorded, otherwise the behavior of executing that command buffer is undefined. Unless otherwise specified, and without explicit synchronization, the various commands submitted to a queue via command buffers may: execute in arbitrary order relative to each other, and/or concurrently. Also, the memory side-effects of those commands may: not be directly visible to other commands without memory barriers. This is true within a command buffer, and across command buffers submitted to a given queue. See <>, <> and <> about synchronization primitives suitable to guarantee execution order and side-effect visibility between commands on a given queue. Each command buffer is always in one of three states: * _Initial state_: Before flink:vkBeginCommandBuffer. Either flink:vkBeginCommandBuffer has never been called, or the command buffer has been reset since it last recorded commands. * _Recording state_: Between flink:vkBeginCommandBuffer and flink:vkEndCommandBuffer. The command buffer is in a state where it can: record commands. * _Executable state_: After flink:vkEndCommandBuffer. The command buffer is in a state where it has finished recording commands and can: be executed. _Resetting_ a command buffer is an operation that discards any previously recorded commands and puts a command buffer in the initial state. Resetting occurs as a result of flink:vkResetCommandBuffer or flink:vkResetCommandPool, or as part of flink:vkBeginCommandBuffer (which additionally puts the command buffer in the recording state). [[commandbuffers-pools]] == Command Pools // refBegin VkCommandPool Opaque handle to a command pool object Command pools are opaque objects that command buffer memory is allocated from, and which allow the implementation to amortize the cost of resource creation across multiple command buffers. Command pools are application-synchronized, meaning that a command pool must: not be used concurrently in multiple threads. That includes use via recording commands on any command buffers allocated from the pool, as well as operations that allocate, free, and reset command buffers or the pool itself. Command pools are represented by sname:VkCommandPool handles: include::../api/handles/VkCommandPool.txt[] // refEnd VkCommandPool // refBegin vkCreateCommandPool Create a new command pool object To create a command pool, call: include::../api/protos/vkCreateCommandPool.txt[] * pname:device is the logical device that creates the command pool. * pname:pCreateInfo contains information used to create the command pool. * pname:pAllocator controls host memory allocation as described in the <> chapter. * pname:pCommandPool points to a sname:VkCommandPool handle in which the created pool is returned. include::../validity/protos/vkCreateCommandPool.txt[] // refBegin VkCommandPoolCreateInfo Structure specifying parameters of a newly created command pool The sname:VkCommandPoolCreateInfo structure is defined as: include::../api/structs/VkCommandPoolCreateInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is a bitmask indicating usage behavior for the pool and command buffers allocated from it. Bits which can: be set include: + -- // refBegin VkCommandPoolCreateFlagBits Bitmask specifying usage behavior for a command pool include::../api/enums/VkCommandPoolCreateFlagBits.txt[] -- + ** ename:VK_COMMAND_POOL_CREATE_TRANSIENT_BIT indicates that command buffers allocated from the pool will be short-lived, meaning that they will be reset or freed in a relatively short timeframe. This flag may: be used by the implementation to control memory allocation behavior within the pool. ** ename:VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT controls whether command buffers allocated from the pool can: be individually reset. If this flag is set, individual command buffers allocated from the pool can: be reset either explicitly, by calling fname:vkResetCommandBuffer, or implicitly, by calling fname:vkBeginCommandBuffer on an executable command buffer. If this flag is not set, then fname:vkResetCommandBuffer and fname:vkBeginCommandBuffer (on an executable command buffer) must: not be called on the command buffers allocated from the pool, and they can: only be reset in bulk by calling fname:vkResetCommandPool. * pname:queueFamilyIndex designates a queue family as described in section <>. All command buffers allocated from this command pool must: be submitted on queues from the same queue family. .Valid Usage **** * pname:queueFamilyIndex must: be the index of a queue family available in the calling command's pname:device parameter **** include::../validity/structs/VkCommandPoolCreateInfo.txt[] // refBegin vkResetCommandPool Reset a command pool To reset a command pool, call: include::../api/protos/vkResetCommandPool.txt[] * pname:device is the logical device that owns the command pool. * pname:commandPool is the command pool to reset. * pname:flags contains additional flags controlling the behavior of the reset. Bits which can: be set include: + -- // refBegin VkCommandPoolResetFlagBits Bitmask controlling behavior of a command pool reset include::../api/enums/VkCommandPoolResetFlagBits.txt[] -- + If pname:flags includes ename:VK_COMMAND_POOL_RESET_RELEASE_RESOURCES_BIT, resetting a command pool recycles all of the resources from the command pool back to the system. Resetting a command pool recycles all of the resources from all of the command buffers allocated from the command pool back to the command pool. All command buffers that have been allocated from the command pool are put in the initial state. .Valid Usage **** * All sname:VkCommandBuffer objects allocated from pname:commandPool must: not currently be pending execution **** include::../validity/protos/vkResetCommandPool.txt[] // refBegin vkDestroyCommandPool Destroy a command pool object To destroy a command pool, call: include::../api/protos/vkDestroyCommandPool.txt[] * pname:device is the logical device that destroys the command pool. * pname:commandPool is the handle of the command pool to destroy. * pname:pAllocator controls host memory allocation as described in the <> chapter. When a pool is destroyed, all command buffers allocated from the pool are implicitly freed and become invalid. Command buffers allocated from a given pool do not need to be freed before destroying that command pool. .Valid Usage **** * All sname:VkCommandBuffer objects allocated from pname:commandPool must: not be pending execution * If sname:VkAllocationCallbacks were provided when pname:commandPool was created, a compatible set of callbacks must: be provided here * If no sname:VkAllocationCallbacks were provided when pname:commandPool was created, pname:pAllocator must: be `NULL` **** include::../validity/protos/vkDestroyCommandPool.txt[] [[commandbuffer-allocation]] == Command Buffer Allocation and Management // refBegin vkAllocateCommandBuffers Allocate command buffers from an existing command pool To allocate command buffers, call: include::../api/protos/vkAllocateCommandBuffers.txt[] * pname:device is the logical device that owns the command pool. * pname:pAllocateInfo is a pointer to an instance of the sname:VkCommandBufferAllocateInfo structure describing parameters of the allocation. * pname:pCommandBuffers is a pointer to an array of sname:VkCommandBuffer handles in which the resulting command buffer objects are returned. The array must: be at least the length specified by the pname:commandBufferCount member of pname:pAllocateInfo. Each allocated command buffer begins in the initial state. include::../validity/protos/vkAllocateCommandBuffers.txt[] // refBegin VkCommandBufferAllocateInfo Structure specifying the allocation parameters for command buffer object The sname:VkCommandBufferAllocateInfo structure is defined as: include::../api/structs/VkCommandBufferAllocateInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:commandPool is the name of the command pool that the command buffers allocate their memory from. * pname:level determines whether the command buffers are primary or secondary command buffers. Possible values include: + -- // refBegin VkCommandBufferLevel Structure specifying a command buffer level include::../api/enums/VkCommandBufferLevel.txt[] -- + * pname:commandBufferCount is the number of command buffers to allocate from the pool. .Valid Usage **** * pname:commandBufferCount must: be greater than `0` **** include::../validity/structs/VkCommandBufferAllocateInfo.txt[] // refBegin vkResetCommandBuffer Reset a command buffer To reset command buffers, call: include::../api/protos/vkResetCommandBuffer.txt[] * pname:commandBuffer is the command buffer to reset. The command buffer can: be in any state, and is put in the initial state. * pname:flags is a bitmask controlling the reset operation. Bits which can: be set include: + -- // refBegin VkCommandBufferResetFlagBits Bitmask controlling behavior of a command buffer reset include::../api/enums/VkCommandBufferResetFlagBits.txt[] -- + If pname:flags includes ename:VK_COMMAND_BUFFER_RESET_RELEASE_RESOURCES_BIT, then most or all memory resources currently owned by the command buffer should: be returned to the parent command pool. If this flag is not set, then the command buffer may: hold onto memory resources and reuse them when recording commands. .Valid Usage **** * pname:commandBuffer must: not currently be pending execution * pname:commandBuffer must: have been allocated from a pool that was created with the ename:VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT **** include::../validity/protos/vkResetCommandBuffer.txt[] // refBegin vkFreeCommandBuffers Free command buffers To free command buffers, call: include::../api/protos/vkFreeCommandBuffers.txt[] * pname:device is the logical device that owns the command pool. * pname:commandPool is the handle of the command pool that the command buffers were allocated from. * pname:commandBufferCount is the length of the pname:pCommandBuffers array. * pname:pCommandBuffers is an array of handles of command buffers to free. .Valid Usage **** * All elements of pname:pCommandBuffers must: not be pending execution * pname:pCommandBuffers must: be a pointer to an array of pname:commandBufferCount sname:VkCommandBuffer handles, each element of which must: either be a valid handle or code:NULL **** include::../validity/protos/vkFreeCommandBuffers.txt[] [[commandbuffers-recording]] == Command Buffer Recording // refBegin vkBeginCommandBuffer Start recording a command buffer To begin recording a command buffer, call: include::../api/protos/vkBeginCommandBuffer.txt[] * pname:commandBuffer is the handle of the command buffer which is to be put in the recording state. * pname:pBeginInfo is an instance of the sname:VkCommandBufferBeginInfo structure, which defines additional information about how the command buffer begins recording. .Valid Usage **** * pname:commandBuffer must: not be in the recording state * pname:commandBuffer must: not currently be pending execution * If pname:commandBuffer was allocated from a sname:VkCommandPool which did not have the ename:VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT flag set, pname:commandBuffer must: be in the initial state * If pname:commandBuffer is a secondary command buffer, the pname:pInheritanceInfo member of pname:pBeginInfo must: be a valid sname:VkCommandBufferInheritanceInfo structure * If pname:commandBuffer is a secondary command buffer and either the pname:occlusionQueryEnable member of the pname:pInheritanceInfo member of pname:pBeginInfo is ename:VK_FALSE, or the precise occlusion queries feature is not enabled, the pname:queryFlags member of the pname:pInheritanceInfo member pname:pBeginInfo must: not contain ename:VK_QUERY_CONTROL_PRECISE_BIT **** include::../validity/protos/vkBeginCommandBuffer.txt[] // refBegin VkCommandBufferBeginInfo Structure specifying a command buffer begin operation The sname:VkCommandBufferBeginInfo structure is defined as: include::../api/structs/VkCommandBufferBeginInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is a bitmask indicating usage behavior for the command buffer. Bits which can: be set include: + -- // refBegin VkCommandBufferUsageFlagBits Bitmask specifying usage behavior for command buffer include::../api/enums/VkCommandBufferUsageFlagBits.txt[] -- + ** ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT indicates that each recording of the command buffer will only be submitted once, and the command buffer will be reset and recorded again between each submission. ** ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT indicates that a secondary command buffer is considered to be entirely inside a render pass. If this is a primary command buffer, then this bit is ignored. ** Setting ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT allows the command buffer to be resubmitted to a queue or recorded into a primary command buffer while it is pending execution. * pname:pInheritanceInfo is a pointer to a sname:VkCommandBufferInheritanceInfo structure, which is used if pname:commandBuffer is a secondary command buffer. If this is a primary command buffer, then this value is ignored. .Valid Usage **** * If pname:flags contains ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT, the pname:renderPass member of pname:pInheritanceInfo must: be a valid sname:VkRenderPass * If pname:flags contains ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT, the pname:subpass member of pname:pInheritanceInfo must: be a valid subpass index within the pname:renderPass member of pname:pInheritanceInfo * If pname:flags contains ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT, the pname:framebuffer member of pname:pInheritanceInfo must: be either dlink:VK_NULL_HANDLE, or a valid sname:VkFramebuffer that is compatible with the pname:renderPass member of pname:pInheritanceInfo **** include::../validity/structs/VkCommandBufferBeginInfo.txt[] // refBegin VkCommandBufferInheritanceInfo Structure specifying command buffer inheritance info If the command buffer is a secondary command buffer, then the sname:VkCommandBufferInheritanceInfo structure defines any state that will be inherited from the primary command buffer: include::../api/structs/VkCommandBufferInheritanceInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:renderPass is a sname:VkRenderPass object defining which render passes the sname:VkCommandBuffer will be <> with and can: be executed within. If the sname:VkCommandBuffer will not be executed within a render pass instance, pname:renderPass is ignored. * pname:subpass is the index of the subpass within the render pass instance that the sname:VkCommandBuffer will be executed within. If the sname:VkCommandBuffer will not be executed within a render pass instance, pname:subpass is ignored. * pname:framebuffer optionally refers to the sname:VkFramebuffer object that the sname:VkCommandBuffer will be rendering to if it is executed within a render pass instance. It can: be dlink:VK_NULL_HANDLE if the framebuffer is not known, or if the sname:VkCommandBuffer will not be executed within a render pass instance. + [NOTE] .Note ==== Specifying the exact framebuffer that the secondary command buffer will be executed with may: result in better performance at command buffer execution time. ==== * pname:occlusionQueryEnable indicates whether the command buffer can: be executed while an occlusion query is active in the primary command buffer. If this is ename:VK_TRUE, then this command buffer can: be executed whether the primary command buffer has an occlusion query active or not. If this is ename:VK_FALSE, then the primary command buffer must: not have an occlusion query active. * pname:queryFlags indicates the query flags that can: be used by an active occlusion query in the primary command buffer when this secondary command buffer is executed. If this value includes the ename:VK_QUERY_CONTROL_PRECISE_BIT bit, then the active query can: return boolean results or actual sample counts. If this bit is not set, then the active query must: not use the ename:VK_QUERY_CONTROL_PRECISE_BIT bit. * pname:pipelineStatistics indicates the set of pipeline statistics that can: be counted by an active query in the primary command buffer when this secondary command buffer is executed. If this value includes a given bit, then this command buffer can: be executed whether the primary command buffer has a pipeline statistics query active that includes this bit or not. If this value excludes a given bit, then the active pipeline statistics query must: not be from a query pool that counts that statistic. .Valid Usage **** * If the <> feature is not enabled, pname:occlusionQueryEnable must: be ename:VK_FALSE * If the <> feature is enabled, pname:queryFlags must: be a valid combination of elink:VkQueryControlFlagBits values * If the <> feature is not enabled, pname:pipelineStatistics must: be code:0 **** include::../validity/structs/VkCommandBufferInheritanceInfo.txt[] A primary command buffer is considered to be pending execution from the time it is submitted via fname:vkQueueSubmit until that submission completes. A secondary command buffer is considered to be pending execution from the time its execution is recorded into a primary buffer (via fname:vkCmdExecuteCommands) until the final time that primary buffer's submission to a queue completes. If, after the primary buffer completes, the secondary command buffer is recorded to execute on a different primary buffer, the first primary buffer must: not be resubmitted until after it is reset with flink:vkResetCommandBuffer unless the secondary command buffer was recorded with ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT. If ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT is not set on a secondary command buffer, that command buffer must: not be used more than once in a given primary command buffer. Furthermore, if a secondary command buffer without ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT set is recorded to execute in a primary command buffer with ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT set, the primary command buffer must: not be pending execution more than once at a time. [NOTE] .Note ==== On some implementations, not using the ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT bit enables command buffers to be patched in-place if needed, rather than creating a copy of the command buffer. ==== If a command buffer is in the executable state and the command buffer was allocated from a command pool with the ename:VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT flag set, then fname:vkBeginCommandBuffer implicitly resets the command buffer, behaving as if fname:vkResetCommandBuffer had been called with ename:VK_COMMAND_BUFFER_RESET_RELEASE_RESOURCES_BIT not set. It then puts the command buffer in the recording state. Once recording starts, an application records a sequence of commands (ftext:vkCmd*) to set state in the command buffer, draw, dispatch, and other commands. ifdef::VK_NVX_device_generated_commands[] Several commands can also be recorded indirectly from sname:VkBuffer content, see <>. endif::VK_NVX_device_generated_commands[] // refBegin vkEndCommandBuffer Finish recording a command buffer To complete recording of a command buffer, call: include::../api/protos/vkEndCommandBuffer.txt[] * pname:commandBuffer is the command buffer to complete recording. The command buffer must: have been in the recording state, and is moved to the executable state. If there was an error during recording, the application will be notified by an unsuccessful return code returned by fname:vkEndCommandBuffer. If the application wishes to further use the command buffer, the command buffer must: be reset. .Valid Usage **** * pname:commandBuffer must: be in the recording state * If pname:commandBuffer is a primary command buffer, there must: not be an active render pass instance * All queries made <> during the recording of pname:commandBuffer must: have been made inactive **** include::../validity/protos/vkEndCommandBuffer.txt[] When a command buffer is in the executable state, it can: be submitted to a queue for execution. [[commandbuffers-submission]] == Command Buffer Submission // refBegin vkQueueSubmit Submits a sequence of semaphores or command buffers to a queue To submit command buffers to a queue, call: include::../api/protos/vkQueueSubmit.txt[] * pname:queue is the queue that the command buffers will be submitted to. * pname:submitCount is the number of elements in the pname:pSubmits array. * pname:pSubmits is a pointer to an array of slink:VkSubmitInfo structures, each specifying a command buffer submission batch. * pname:fence is an optional handle to a fence to be signaled. If pname:fence is not dlink:VK_NULL_HANDLE, it defines a <>. [NOTE] .Note ==== Submission can be a high overhead operation, and applications should: attempt to batch work together into as few calls to fname:vkQueueSubmit as possible. ==== fname:vkQueueSubmit is a <>, with each batch defined by an element of pname:pSubmits as an instance of the slink:VkSubmitInfo structure. Batches begin execution in the order they appear in pname:pSubmits, but may: complete out of order. Fence and semaphore operations submitted with flink:vkQueueSubmit have additional ordering constraints compared to other submission commands, with dependencies involving previous and subsequent queue operations. Information about these additional constraints can be found in the <> and <> sections of <>. Details on the interaction of pname:pWaitDstStageMask with synchronization are described in the <> section of <>. .Valid Usage **** * If pname:fence is not dlink:VK_NULL_HANDLE, pname:fence must: be unsignaled * If pname:fence is not dlink:VK_NULL_HANDLE, pname:fence must: not be associated with any other queue command that has not yet completed execution on that queue * Any calls to flink:vkCmdSetEvent, flink:vkCmdResetEvent or flink:vkCmdWaitEvents that have been recorded into any of the command buffer elements of the pname:pCommandBuffers member of any element of pname:pSubmits, must: not reference any slink:VkEvent that is referenced by any of those commands that is pending execution on another queue. * Any stage flag included in any element of the pname:pWaitDstStageMask member of any element of pname:pSubmits must: be a pipeline stage supported by one of the capabilities of pname:queue, as specified in the <>. **** include::../validity/protos/vkQueueSubmit.txt[] // refBegin VkSubmitInfo Structure specifying a queue submit operation The sname:VkSubmitInfo structure is defined as: include::../api/structs/VkSubmitInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:waitSemaphoreCount is the number of semaphores upon which to wait before executing the command buffers for the batch. * pname:pWaitSemaphores is a pointer to an array of semaphores upon which to wait before the command buffers for this batch begin execution. If semaphores to wait on are provided, they define a <>. * pname:pWaitDstStageMask is a pointer to an array of pipeline stages at which each corresponding semaphore wait will occur. * pname:commandBufferCount is the number of command buffers to execute in the batch. * pname:pCommandBuffers is a pointer to an array of command buffers to execute in the batch. The command buffers submitted in a batch begin execution in the order they appear in pname:pCommandBuffers, but may: complete out of order. * pname:signalSemaphoreCount is the number of semaphores to be signaled once the commands specified in pname:pCommandBuffers have completed execution. * pname:pSignalSemaphores is a pointer to an array of semaphores which will be signaled when the command buffers for this batch have completed execution. If semaphores to be signaled are provided, they define a <>. .Valid Usage **** * Any given element of pname:pSignalSemaphores must: currently be unsignaled * Any given element of pname:pCommandBuffers must: either have been recorded with the ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT, or not currently be executing on the device * Any given element of pname:pCommandBuffers must: be in the executable state * If any given element of pname:pCommandBuffers contains commands that execute secondary command buffers, those secondary command buffers must: have been recorded with the ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT, or not currently be executing on the device * If any given element of pname:pCommandBuffers was recorded with ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT, it must: not have been previously submitted without re-recording that command buffer * If any given element of pname:pCommandBuffers contains commands that execute secondary command buffers recorded with ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT, each such secondary command buffer must: not have been previously submitted without re-recording that command buffer * Any given element of pname:pCommandBuffers must: not contain commands that execute a secondary command buffer, if that secondary command buffer has been recorded in another primary command buffer after it was recorded into this sname:VkCommandBuffer * Any given element of pname:pCommandBuffers must: have been allocated from a sname:VkCommandPool that was created for the same queue family that the calling command's pname:queue belongs to * Any given element of pname:pCommandBuffers must: not have been allocated with ename:VK_COMMAND_BUFFER_LEVEL_SECONDARY * Any given element of sname:VkSemaphore in pname:pWaitSemaphores must: refer to a prior signal of that sname:VkSemaphore that will not be consumed by any other wait on that semaphore * If the <> feature is not enabled, any given element of pname:pWaitDstStageMask must: not contain ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT * If the <> feature is not enabled, any given element of pname:pWaitDstStageMask must: not contain ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT **** include::../validity/structs/VkSubmitInfo.txt[] ifdef::VK_NV_win32_keyed_mutex[] include::VK_NV_win32_keyed_mutex/keyed_mutex_submit.txt[] endif::VK_NV_win32_keyed_mutex[] [[commandbuffers-submission-progress]] == Queue Forward Progress The application must: ensure that command buffer submissions will be able to complete without any subsequent operations by the application on any queue. After any call to fname:vkQueueSubmit, for every queued wait on a semaphore there must: be a prior signal of that semaphore that will not be consumed by a different wait on the semaphore. Command buffers in the submission can: include flink:vkCmdWaitEvents commands that wait on events that will not be signaled by earlier commands in the queue. Such events must: be signaled by the application using flink:vkSetEvent, and the fname:vkCmdWaitEvents commands that wait upon them must: not be inside a render pass instance. Implementations may: have limits on how long the command buffer will wait, in order to avoid interfering with progress of other clients of the device. If the event is not signaled within these limits, results are undefined and may: include device loss. [[commandbuffers-secondary]] == Secondary Command Buffer Execution // refBegin vkCmdExecuteCommands Execute a secondary command buffer from a primary command buffer A secondary command buffer must: not be directly submitted to a queue. Instead, secondary command buffers are recorded to execute as part of a primary command buffer with the command: include::../api/protos/vkCmdExecuteCommands.txt[] * pname:commandBuffer is a handle to a primary command buffer that the secondary command buffers are executed in. * pname:commandBufferCount is the length of the pname:pCommandBuffers array. * pname:pCommandBuffers is an array of secondary command buffer handles, which are recorded to execute in the primary command buffer in the order they are listed in the array. Once fname:vkCmdExecuteCommands has been called, any prior executions of the secondary command buffers specified by pname:pCommandBuffers in any other primary command buffer become invalidated, unless those secondary command buffers were recorded with ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT. .Valid Usage **** * pname:commandBuffer must: have been allocated with a pname:level of ename:VK_COMMAND_BUFFER_LEVEL_PRIMARY * Any given element of pname:pCommandBuffers must: have been allocated with a pname:level of ename:VK_COMMAND_BUFFER_LEVEL_SECONDARY * Any given element of pname:pCommandBuffers must: not be already pending execution in pname:commandBuffer, or appear twice in pname:pCommandBuffers, unless it was recorded with the ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT flag * Any given element of pname:pCommandBuffers must: not be already pending execution in any other sname:VkCommandBuffer, unless it was recorded with the ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT flag * Any given element of pname:pCommandBuffers must: be in the executable state * Any given element of pname:pCommandBuffers must: have been allocated from a sname:VkCommandPool that was created for the same queue family as the sname:VkCommandPool from which pname:commandBuffer was allocated * If fname:vkCmdExecuteCommands is being called within a render pass instance, that render pass instance must: have been begun with the pname:contents parameter of fname:vkCmdBeginRenderPass set to ename:VK_SUBPASS_CONTENTS_SECONDARY_COMMAND_BUFFERS * If fname:vkCmdExecuteCommands is being called within a render pass instance, any given element of pname:pCommandBuffers must: have been recorded with the ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT * If fname:vkCmdExecuteCommands is being called within a render pass instance, any given element of pname:pCommandBuffers must: have been recorded with sname:VkCommandBufferInheritanceInfo::pname:subpass set to the index of the subpass which the given command buffer will be executed in * If fname:vkCmdExecuteCommands is being called within a render pass instance, the render passes specified in the pname::pBeginInfo::pname:pInheritanceInfo::pname:renderPass members of the flink:vkBeginCommandBuffer commands used to begin recording each element of pname:pCommandBuffers must: be <> with the current render pass. * If fname:vkCmdExecuteCommands is being called within a render pass instance, and any given element of pname:pCommandBuffers was recorded with sname:VkCommandBufferInheritanceInfo::pname:framebuffer not equal to dlink:VK_NULL_HANDLE, that sname:VkFramebuffer must: match the sname:VkFramebuffer used in the current render pass instance * If fname:vkCmdExecuteCommands is not being called within a render pass instance, any given element of pname:pCommandBuffers must: not have been recorded with the ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT * If the <> feature is not enabled, pname:commandBuffer must: not have any queries <> * If pname:commandBuffer has a ename:VK_QUERY_TYPE_OCCLUSION query <>, then each element of pname:pCommandBuffers must: have been recorded with sname:VkCommandBufferInheritanceInfo::pname:occlusionQueryEnable set to ename:VK_TRUE * If pname:commandBuffer has a ename:VK_QUERY_TYPE_OCCLUSION query <>, then each element of pname:pCommandBuffers must: have been recorded with sname:VkCommandBufferInheritanceInfo::pname:queryFlags having all bits set that are set for the query * If pname:commandBuffer has a ename:VK_QUERY_TYPE_PIPELINE_STATISTICS query <>, then each element of pname:pCommandBuffers must: have been recorded with sname:VkCommandBufferInheritanceInfo::pname:pipelineStatistics having all bits set that are set in the sname:VkQueryPool the query uses * Any given element of pname:pCommandBuffers must: not begin any query types that are <> in pname:commandBuffer **** include::../validity/protos/vkCmdExecuteCommands.txt[]