// Copyright (c) 2015-2017 The Khronos Group Inc. // Copyright notice at https://www.khronos.org/registry/speccopyright.html [appendix] [[spirvenv]] = Vulkan Environment for SPIR-V Shaders for Vulkan are defined by the <> as well as the <> Specification. This appendix defines additional SPIR-V requirements applying to Vulkan shaders. == Required Versions and Formats A Vulkan 1.0 implementation must: support the 1.0 version of SPIR-V and the 1.0 version of the SPIR-V Extended Instructions for GLSL. A SPIR-V module passed into flink:vkCreateShaderModule is interpreted as a series of 32-bit words in host endianness, with literal strings packed as described in section 2.2 of the SPIR-V Specification. The first few words of the SPIR-V module must: be a magic number and a SPIR-V version number, as described in section 2.3 of the SPIR-V Specification. [[spirvenv-capabilities]] == Capabilities Implementations must: support the following capability operands declared by code:OpCapability: * code:Matrix * code:Shader * code:InputAttachment * code:Sampled1D * code:Image1D * code:SampledBuffer * code:ImageBuffer * code:ImageQuery * code:DerivativeControl Implementations may: support features that are not required: by the Specification, as described in the <> chapter. If such a feature is supported, then any capability operand(s) corresponding to that feature must: also be supported. [[spirvenv-capabilities-table]] .SPIR-V Capabilities which are not required:, and corresponding feature or extension names [options="header"] |==== | SPIR-V OpCapability | Vulkan feature or extension name | code:Geometry | <> | code:Tessellation | <> | code:Float64 | <> | code:Int64 | <> | code:Int16 | <> | code:TessellationPointSize | <> | code:GeometryPointSize | <> | code:ImageGatherExtended | <> | code:StorageImageMultisample | <> | code:UniformBufferArrayDynamicIndexing | <> | code:SampledImageArrayDynamicIndexing | <> | code:StorageBufferArrayDynamicIndexing | <> | code:StorageImageArrayDynamicIndexing | <> | code:ClipDistance | <> | code:CullDistance | <> | code:ImageCubeArray | <> | code:SampleRateShading | <> | code:SparseResidency | <> | code:MinLod | <> | code:SampledCubeArray | <> | code:ImageMSArray | <> | code:StorageImageExtendedFormats | <> | code:InterpolationFunction | <> | code:StorageImageReadWithoutFormat | <> | code:StorageImageWriteWithoutFormat | <> | code:MultiViewport | <> ifdef::VK_KHR_shader_draw_parameters[] [[spirvenv-capabilities-table-drawparameters]] | code:DrawParameters | <> endif::VK_KHR_shader_draw_parameters[] ifdef::VK_EXT_shader_subgroup_ballot[] [[spirvenv-capabilities-table-subgroupballot]] | code:SubgroupBallotKHR | <> endif::VK_EXT_shader_subgroup_ballot[] ifdef::VK_EXT_shader_subgroup_vote[] [[spirvenv-capabilities-table-subgroupvote]] | code:SubgroupVoteKHR | <> endif::VK_EXT_shader_subgroup_vote[] ifdef::VK_KHX_multiview[] [[spirvenv-capabilities-table-multiview]] | code:MultiView | <> endif::VK_KHX_multiview[] ifdef::VK_KHX_device_group[] [[spirvenv-capabilities-table-devicegroup]] | code:DeviceGroup | <> endif::VK_KHX_device_group[] ifdef::VK_AMD_texture_gather_bias_lod[] [[spirvenv-capabilities-table-imagegatherbiaslodamd]] | code:ImageGatherBiasLodAMD | <> endif::VK_AMD_texture_gather_bias_lod[] ifdef::VK_NV_sample_mask_override_coverage[] [[spirvenv-capabilities-table-samplemaskoverridecoverage]] | code:SampleMaskOverrideCoverageNV | <> endif::VK_NV_sample_mask_override_coverage[] ifdef::VK_NV_geometry_shader_passthrough[] [[spirvenv-capabilities-table-geometryshaderpassthrough]] | code:GeometryShaderPassthroughNV | <> endif::VK_NV_geometry_shader_passthrough[] ifdef::VK_NV_viewport_array2[] [[spirvenv-capabilities-table-viewportarray2]] | code:ShaderViewportIndexLayerNV | <> | code:ShaderViewportMaskNV | <> endif::VK_NV_viewport_array2[] ifdef::VK_NVX_multiview_per_view_attributes[] [[spirvenv-capabilities-table-perviewattributes]] | code:PerViewAttributesNV | <> endif::VK_NVX_multiview_per_view_attributes[] |==== ifdef::VK_AMD_shader_explicit_vertex_parameter[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_AMD_shader_explicit_vertex_parameter+ SPIR-V extension. endif::VK_AMD_shader_explicit_vertex_parameter[] ifdef::VK_AMD_gcn_shader[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_AMD_gcn_shader+ SPIR-V extension. endif::VK_AMD_gcn_shader[] ifdef::VK_AMD_gpu_shader_half_float[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_AMD_gpu_shader_half_float+ SPIR-V extension. endif::VK_AMD_gpu_shader_half_float[] ifdef::VK_AMD_shader_ballot[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_AMD_shader_ballot+ SPIR-V extension. endif::VK_AMD_shader_ballot[] ifdef::VK_AMD_shader_trinary_minmax[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_AMD_shader_trinary_minmax+ SPIR-V extension. endif::VK_AMD_shader_trinary_minmax[] ifdef::VK_AMD_texture_gather_bias_lod[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_AMD_texture_gather_bias_lod+ SPIR-V extension. endif::VK_AMD_texture_gather_bias_lod[] ifdef::VK_KHR_shader_draw_parameters[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_KHR_shader_draw_parameters+ SPIR-V extension. endif::VK_KHR_shader_draw_parameters[] ifdef::VK_EXT_shader_subgroup_ballot[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_KHR_shader_ballot+ SPIR-V extension. endif::VK_EXT_shader_subgroup_ballot[] ifdef::VK_EXT_shader_subgroup_vote[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_KHR_subgroup_vote+ SPIR-V extension. endif::VK_EXT_shader_subgroup_vote[] ifdef::VK_NV_sample_mask_override_coverage[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_NV_sample_mask_override_coverage+ SPIR-V extension. endif::VK_NV_sample_mask_override_coverage[] ifdef::VK_NV_geometry_shader_passthrough[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_NV_geometry_shader_passthrough+ SPIR-V extension. endif::VK_NV_geometry_shader_passthrough[] ifdef::VK_NV_viewport_array2[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_NV_viewport_array2+ SPIR-V extension. endif::VK_NV_viewport_array2[] ifdef::VK_NVX_multiview_per_view_attributes[] The application can: pass a SPIR-V module to flink:vkCreateShaderModule that uses the +SPV_NVX_multiview_per_view_attributes+ SPIR-V extension. endif::VK_NVX_multiview_per_view_attributes[] The application must: not pass a SPIR-V module containing any of the following to flink:vkCreateShaderModule: * any OpCapability not listed above, * an unsupported capability, or * a capability which corresponds to a Vulkan feature or extension which has not been enabled. [[spirvenv-module-validation]] == Validation Rules within a Module A SPIR-V module passed to flink:vkCreateShaderModule must: conform to the following rules: * Every entry point must: have no return value and accept no arguments. * Recursion: The static function-call graph for an entry point must: not contain cycles. * The *Logical* addressing model must: be selected. * *Scope* for execution must: be limited to: ** *Workgroup* ** *Subgroup* * *Scope* for memory must: be limited to: ** *Device* ** *Workgroup* ** *Invocation* * Variables declared in the *UniformConstant* storage class must: not have initializers. * The code:OriginLowerLeft execution mode must: not be used; fragment entry points must: declare code:OriginUpperLeft. * The code:PixelCenterInteger execution mode must: not be used. Pixels are always centered at half-integer coordinates. * Images ** code:OpTypeImage must: declare a scalar 32-bit float or 32-bit integer type for the "`Sampled Type`". (code:RelaxedPrecision can: be applied to a sampling instruction and to the variable holding the result of a sampling instruction.) ** code:OpSampledImage must: only consume an "`Image`" operand whose type has its "`Sampled`" operand set to 1. ** The [eq]#(u,v)# coordinates used for a code:SubpassData must: be the of a constant vector [eq]#(0,0)#, or if a layer coordinate is used, must: be a vector that was formed with constant 0 for the [eq]#u# and [eq]#v# components. ** The "`Depth`" operand of code:OpTypeImage is ignored. * Decorations ** The code:GLSLShared and code:GLSLPacked decorations must: not be used. ** The code:Flat, code:NoPerspective, code:Sample, and code:Centroid decorations must: not be used on variables with storage class other than code:Input or on variables used in the interface of non-fragment shader entry points. ** The code:Patch decoration must: not be used on variables in the interface of a vertex, geometry, or fragment shader stage's entry point. ifdef::VK_NV_viewport_array2[] ** The code:ViewportRelativeNV decoration must: only be used on a variable decorated with code:Layer in the vertex, tessellation evaluation, or geometry shader stages. ** The code:ViewportRelativeNV decoration must: not be used unless a variable decorated with one of code:ViewportIndex or code:ViewportMaskNV is also statically used by the same code:OpEntryPoint. ** The code:ViewportMaskNV and code:ViewportIndex decorations must: not both be statically used by one or more code:OpEntryPoint's that form the vertex processing stages of a graphics pipeline. endif::VK_NV_viewport_array2[] * code:OpTypeRuntimeArray must: only be used for the last member of an code:OpTypeStruct that is in the code:Uniform storage class and is decorated as code:BufferBlock. * Linkage: See <> for additional linking and validation rules. * Compute Shaders ** For each compute shader entry point, either a code:LocalSize execution mode or an object decorated with the code:WorkgroupSize decoration must: be specified. * Atomic instructions must: declare a scalar 32-bit integer type for the "`Result Type`". [[spirvenv-precision-operation]] == Precision and Operation of SPIR-V Instructions The following rules apply to both single and double-precision floating point instructions: * Positive and negative infinities and positive and negative zeros are generated as dictated by <>, but subject to the precisions allowed in the following table. * Dividing a non-zero by a zero results in the appropriately signed <> infinity. * Any denormalized value input into a shader or potentially generated by any instruction in a shader may: be flushed to 0. * The rounding mode cannot: be set and is undefined. * [eq]##NaN##s may: not be generated. Instructions that operate on a [eq]#NaN# may: not result in a [eq]#NaN#. * Support for signaling [eq]##NaN##s is optional: and exceptions are never raised. The precision of double-precision instructions is at least that of single precision. For single precision (32 bit) instructions, precisions are required: to be at least as follows, unless decorated with RelaxedPrecision: .Precision of core SPIR-V Instructions [options="header"] |==== | Instruction | Precision | code:OpFAdd | Correctly rounded. | code:OpFSub | Correctly rounded. | code:OpFMul | Correctly rounded. | code:OpFOrdEqual, code:OpFUnordEqual | Correct result. | code:OpFOrdLessThan, code:OpFUnordLessThan | Correct result. | code:OpFOrdGreaterThan, code:OpFUnordGreaterThan | Correct result. | code:OpFOrdLessThanEqual, code:OpFUnordLessThanEqual | Correct result. | code:OpFOrdGreaterThanEqual, code:OpFUnordGreaterThanEqual| Correct result. | code:OpFDiv | 2.5 ULP for b in the range [2^-126^, 2^126^]. | conversions between types | Correctly rounded. |==== .Precision of GLSL.std.450 Instructions [options="header"] |==== |Instruction | Precision | code:fma() | Inherited from code:OpFMul followed by code:OpFAdd. | code:exp(x), code:exp2(x) | [eq]#3 + 2 {times} {vert}x{vert}# ULP. | code:log(), code:log2() | 3 ULP outside the range [eq]#[0.5, 2.0]#. Absolute error < [eq]#2^-21^# inside the range [eq]#[0.5, 2.0]#. | code:pow(x, y) | Inherited from code:exp2(y {times} code:log2(x)). | code:sqrt() | Inherited from 1.0 / code:inversesqrt(). | code:inversesqrt() | 2 ULP. |==== GLSL.std.450 extended instructions specifically defined in terms of the above instructions inherit the above errors. GLSL.std.450 extended instructions not listed above and not defined in terms of the above have undefined precision. These include, for example, the trigonometric functions and determinant. For the code:OpSRem and code:OpSMod instructions, if either operand is negative the result is undefined. [NOTE] .Note ==== While the code:OpSRem and code:OpSMod instructions are supported by the Vulkan environment, they require non-negative values and thus do not enable additional functionality beyond what code:OpUMod provides. ==== [[spirvenv-image-formats]] .Compatibility Between SPIR-V Image Formats And Vulkan Formats Images which are read from or written to by shaders must: have SPIR-V image formats compatible with the Vulkan image formats backing the image under the circumstances described for <>. The compatibile formats are: .SPIR-V and Vulkan Image Format Compatibility [cols="2*", options="header"] |==== |SPIR-V Image Format |Compatible Vulkan Format |code:Rgba32f |ename:VK_FORMAT_R32G32B32A32_SFLOAT |code:Rgba16f |ename:VK_FORMAT_R16G16B16A16_SFLOAT |code:R32f |ename:VK_FORMAT_R32_SFLOAT |code:Rgba8 |ename:VK_FORMAT_R8G8B8A8_UNORM |code:Rgba8Snorm |ename:VK_FORMAT_R8G8B8A8_SNORM |code:Rg32f |ename:VK_FORMAT_R32G32_SFLOAT |code:Rg16f |ename:VK_FORMAT_R16G16_SFLOAT |code:R11fG11fB10f |ename:VK_FORMAT_B10G11R11_UFLOAT_PACK32 |code:R16f |ename:VK_FORMAT_R16_SFLOAT |code:Rgba16 |ename:VK_FORMAT_R16G16B16A16_UNORM |code:Rgb10A2 |ename:VK_FORMAT_A2B10G10R10_UNORM_PACK32 |code:Rg16 |ename:VK_FORMAT_R16G16_UNORM |code:Rg8 |ename:VK_FORMAT_R8G8_UNORM |code:R16 |ename:VK_FORMAT_R16_UNORM |code:R8 |ename:VK_FORMAT_R8_UNORM |code:Rgba16Snorm |ename:VK_FORMAT_R16G16B16A16_SNORM |code:Rg16Snorm |ename:VK_FORMAT_R16G16_SNORM |code:Rg8Snorm |ename:VK_FORMAT_R8G8_SNORM |code:R16Snorm |ename:VK_FORMAT_R16_SNORM |code:R8Snorm |ename:VK_FORMAT_R8_SNORM |code:Rgba32i |ename:VK_FORMAT_R32G32B32A32_SINT |code:Rgba16i |ename:VK_FORMAT_R16G16B16A16_SINT |code:Rgba8i |ename:VK_FORMAT_R8G8B8A8_SINT |code:R32i |ename:VK_FORMAT_R32_SINT |code:Rg32i |ename:VK_FORMAT_R32G32_SINT |code:Rg16i |ename:VK_FORMAT_R16G16_SINT |code:Rg8i |ename:VK_FORMAT_R8G8_SINT |code:R16i |ename:VK_FORMAT_R16_SINT |code:R8i |ename:VK_FORMAT_R8_SINT |code:Rgba32ui |ename:VK_FORMAT_R32G32B32A32_UINT |code:Rgba16ui |ename:VK_FORMAT_R16G16B16A16_UINT |code:Rgba8ui |ename:VK_FORMAT_R8G8B8A8_UINT |code:R32ui |ename:VK_FORMAT_R32_UINT |code:Rgb10a2ui |ename:VK_FORMAT_A2B10G10R10_UINT_PACK32 |code:Rg32ui |ename:VK_FORMAT_R32G32_UINT |code:Rg16ui |ename:VK_FORMAT_R16G16_UINT |code:Rg8ui |ename:VK_FORMAT_R8G8_UINT |code:R16ui |ename:VK_FORMAT_R16_UINT |code:R8ui |ename:VK_FORMAT_R8_UINT |====