// Copyright (c) 2015-2017 The Khronos Group Inc. // Copyright notice at https://www.khronos.org/registry/speccopyright.html [[samplers]] = Samplers // refBegin VkSampler Opaque handle to a sampler object sname:VkSampler objects represent the state of an image sampler which is used by the implementation to read image data and apply filtering and other transformations for the shader. Samplers are represented by sname:VkSampler handles: include::../api/handles/VkSampler.txt[] // refEnd VkSampler // refBegin vkCreateSampler Create a new sampler object To create a sampler object, call: include::../api/protos/vkCreateSampler.txt[] * pname:device is the logical device that creates the sampler. * pname:pCreateInfo is a pointer to an instance of the slink:VkSamplerCreateInfo structure specifying the state of the sampler object. * pname:pAllocator controls host memory allocation as described in the <> chapter. * pname:pSampler points to a slink:VkSampler handle in which the resulting sampler object is returned. include::../validity/protos/vkCreateSampler.txt[] // refBegin VkSamplerCreateInfo Structure specifying parameters of a newly created sampler The sname:VkSamplerCreateInfo structure is defined as: include::../api/structs/VkSamplerCreateInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is reserved for future use. * pname:magFilter is a elink:VkFilter value specifying the magnification filter to apply to lookups. * pname:minFilter is a elink:VkFilter value specifying the minification filter to apply to lookups. * pname:mipmapMode is a elink:VkSamplerMipmapMode value specifying the mipmap filter to apply to lookups. * pname:addressModeU is a elink:VkSamplerAddressMode value specifying the addressing mode for outside [0..1] range for U coordinate. * pname:addressModeV is a elink:VkSamplerAddressMode value specifying the addressing mode for outside [0..1] range for V coordinate. * pname:addressModeW is a elink:VkSamplerAddressMode value specifying the addressing mode for outside [0..1] range for W coordinate. * [[samplers-mipLodBias]] pname:mipLodBias is the bias to be added to mipmap LOD calculation and bias provided by image sampling functions in SPIR-V, as described in the <> section. * [[samplers-maxAnisotropy]] pname:anisotropyEnable is ename:VK_TRUE to enable anisotropic filtering, as described in the <> section, or ename:VK_FALSE otherwise. * pname:maxAnisotropy is the anisotropy value clamp. * pname:compareEnable is ename:VK_TRUE to enable comparison against a reference value during lookups, or ename:VK_FALSE otherwise. ** Note: Some implementations will default to shader state if this member does not match. * pname:compareOp is a elink:VkCompareOp value specifying the comparison function to apply to fetched data before filtering as described in the <> section. * pname:minLod and pname:maxLod are the values used to clamp the computed level-of-detail value, as described in the <> section. pname:maxLod must: be greater than or equal to pname:minLod. * pname:borderColor is a elink:VkBorderColor value specifying the predefined border color to use. * [[samplers-unnormalizedCoordinates]] pname:unnormalizedCoordinates controls whether to use unnormalized or normalized texel coordinates to address texels of the image. When set to ename:VK_TRUE, the range of the image coordinates used to lookup the texel is in the range of zero to the image dimensions for x, y and z. When set to ename:VK_FALSE the range of image coordinates is zero to one. When pname:unnormalizedCoordinates is ename:VK_TRUE, samplers have the following requirements: ** pname:minFilter and pname:magFilter must: be equal. ** pname:mipmapMode must: be ename:VK_SAMPLER_MIPMAP_MODE_NEAREST. ** pname:minLod and pname:maxLod must: be zero. ** pname:addressModeU and pname:addressModeV must: each be either ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE or ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER. ** pname:anisotropyEnable must: be ename:VK_FALSE. ** pname:compareEnable must: be ename:VK_FALSE. * When pname:unnormalizedCoordinates is ename:VK_TRUE, images the sampler is used with in the shader have the following requirements: ** The pname:viewType must: be either ename:VK_IMAGE_VIEW_TYPE_1D or ename:VK_IMAGE_VIEW_TYPE_2D. ** The image view must: have a single layer and a single mip level. * When pname:unnormalizedCoordinates is ename:VK_TRUE, image built-in functions in the shader that use the sampler have the following requirements: ** The functions must: not use projection. ** The functions must: not use offsets. [NOTE] .Mapping of OpenGL to Vulkan filter modes ================== pname:magFilter values of ename:VK_FILTER_NEAREST and ename:VK_FILTER_LINEAR directly correspond to code:GL_NEAREST and code:GL_LINEAR magnification filters. pname:minFilter and pname:mipmapMode combine to correspond to the similarly named OpenGL minification filter of code:GL_minFilter_MIPMAP_mipmapMode (e.g. pname:minFilter of ename:VK_FILTER_LINEAR and pname:mipmapMode of ename:VK_SAMPLER_MIPMAP_MODE_NEAREST correspond to code:GL_LINEAR_MIPMAP_NEAREST). There are no Vulkan filter modes that directly correspond to OpenGL minification filters of code:GL_LINEAR or code:GL_NEAREST, but they can: be emulated using ename:VK_SAMPLER_MIPMAP_MODE_NEAREST, pname:minLod = 0, and pname:maxLod = 0.25, and using pname:minFilter = ename:VK_FILTER_LINEAR or pname:minFilter = ename:VK_FILTER_NEAREST, respectively. Note that using a pname:maxLod of zero would cause <> to always be performed, and the pname:magFilter to always be used. This is valid, just not an exact match for OpenGL behavior. Clamping the maximum LOD to 0.25 allows the [eq]#{lambda}# value to be non-zero and minification to be performed, while still always rounding down to the base level. If the pname:minFilter and pname:magFilter are equal, then using a pname:maxLod of zero also works. ================== The maximum number of sampler objects which can: be simultaneously created on a device is implementation-dependent and specified by the <> member of the slink:VkPhysicalDeviceLimits structure. If pname:maxSamplerAllocationCount is exceeded, fname:vkCreateSampler will return ename:VK_ERROR_TOO_MANY_OBJECTS. Since slink:VkSampler is a non-dispatchable handle type, implementations may: return the same handle for sampler state vectors that are identical. In such cases, all such objects would only count once against the pname:maxSamplerAllocationCount limit. .Valid Usage **** * [[VUID-VkSamplerCreateInfo-mipLodBias-01069]] The absolute value of pname:mipLodBias must: be less than or equal to sname:VkPhysicalDeviceLimits::pname:maxSamplerLodBias * [[VUID-VkSamplerCreateInfo-anisotropyEnable-01070]] If the <> feature is not enabled, pname:anisotropyEnable must: be ename:VK_FALSE * [[VUID-VkSamplerCreateInfo-anisotropyEnable-01071]] If pname:anisotropyEnable is ename:VK_TRUE, pname:maxAnisotropy must: be between `1.0` and sname:VkPhysicalDeviceLimits::pname:maxSamplerAnisotropy, inclusive * [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01072]] If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:minFilter and pname:magFilter must: be equal * [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01073]] If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:mipmapMode must: be ename:VK_SAMPLER_MIPMAP_MODE_NEAREST * [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01074]] If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:minLod and pname:maxLod must: be zero * [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01075]] If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:addressModeU and pname:addressModeV must: each be either ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE or ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER * [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01076]] If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:anisotropyEnable must: be ename:VK_FALSE * [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01077]] If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:compareEnable must: be ename:VK_FALSE * [[VUID-VkSamplerCreateInfo-addressModeU-01078]] If any of pname:addressModeU, pname:addressModeV or pname:addressModeW are ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER, pname:borderColor must: be a valid elink:VkBorderColor value * [[VUID-VkSamplerCreateInfo-addressModeU-01079]] If the +VK_KHR_sampler_mirror_clamp_to_edge+ extension is not enabled, pname:addressModeU, pname:addressModeV and pname:addressModeW must: not be ename:VK_SAMPLER_ADDRESS_MODE_MIRROR_CLAMP_TO_EDGE * [[VUID-VkSamplerCreateInfo-compareEnable-01080]] If pname:compareEnable is ename:VK_TRUE, pname:compareOp must: be a valid elink:VkCompareOp value ifdef::VK_IMG_filter_cubic[] * [[VUID-VkSamplerCreateInfo-magFilter-01081]] If either pname:magFilter or pname:minFilter is ename:VK_FILTER_CUBIC_IMG, pname:anisotropyEnable must: be ename:VK_FALSE endif::VK_IMG_filter_cubic[] **** include::../validity/structs/VkSamplerCreateInfo.txt[] // refBegin VkFilter Specify filters used for texture lookups Possible values of the slink:VkSamplerCreateInfo::pname:magFilter and pname:minFilter parameters, specifying filters used for texture lookups, are: include::../api/enums/VkFilter.txt[] * ename:VK_FILTER_NEAREST specifies nearest filtering. * ename:VK_FILTER_LINEAR specifies linear filtering. These filters are described in detail in <>. // refEnd VkFilter // refBegin VkSamplerMipmapMode Specify mipmap mode used for texture lookups Possible values of the slink:VkSamplerCreateInfo::pname:mipmapMode, specifying the mipmap mode used for texture lookups, are: include::../api/enums/VkSamplerMipmapMode.txt[] * ename:VK_SAMPLER_MIPMAP_MODE_NEAREST specifies nearest filtering. * ename:VK_SAMPLER_MIPMAP_MODE_LINEAR specifies linear filtering. These modes are described in detail in <>. // refEnd VkSamplerMipmapMode // refBegin VkSamplerAddressMode Specify behavior of sampling with texture coordinates outside an image Possible values of the slink:VkSamplerCreateInfo::ptext:addressMode* parameters, specifying the behavior of sampling with coordinates outside the range [eq]#[0,1]# for the respective [eq]#u#, [eq]#v#, or [eq]#w# coordinate as defined in the <> section, are: include::../api/enums/VkSamplerAddressMode.txt[] * ename:VK_SAMPLER_ADDRESS_MODE_REPEAT specifies that the repeat wrap mode will be used. * ename:VK_SAMPLER_ADDRESS_MODE_MIRRORED_REPEAT specifies that the mirrored repeat wrap mode will be used. * ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE specifies that the clamp to edge wrap mode will be used. * ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER specifies that the clamp to border wrap mode will be used. * ename:VK_SAMPLER_ADDRESS_MODE_MIRROR_CLAMP_TO_EDGE specifies that the mirror clamp to edge wrap mode will be used. This is only valid if the +VK_KHR_mirror_clamp_to_edge+ extension is enabled. // refEnd VkSamplerAddressMode // refBegin VkBorderColor Specify border color used for texture lookups Possible values of slink:VkSamplerCreateInfo::pname:borderColor, specifying the border color used for texture lookups, are: include::../api/enums/VkBorderColor.txt[] * ename:VK_BORDER_COLOR_FLOAT_TRANSPARENT_BLACK specifies a transparent, floating-point format, black color. * ename:VK_BORDER_COLOR_INT_TRANSPARENT_BLACK specifies a transparent, integer format, black color. * ename:VK_BORDER_COLOR_FLOAT_OPAQUE_BLACK specifies an opaque, floating-point format, black color. * ename:VK_BORDER_COLOR_INT_OPAQUE_BLACK specifies an opaque, integer format, black color. * ename:VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE specifies an opaque, floating-point format, white color. * ename:VK_BORDER_COLOR_INT_OPAQUE_WHITE specifies an opaque, integer format, white color. These colors are described in detail in <>. // refEnd VkBorderColor // refBegin vkDestroySampler Destroy a sampler object To destroy a sampler, call: include::../api/protos/vkDestroySampler.txt[] * pname:device is the logical device that destroys the sampler. * pname:sampler is the sampler to destroy. * pname:pAllocator controls host memory allocation as described in the <> chapter. .Valid Usage **** * [[VUID-vkDestroySampler-sampler-01082]] All submitted commands that refer to pname:sampler must: have completed execution * [[VUID-vkDestroySampler-sampler-01083]] If sname:VkAllocationCallbacks were provided when pname:sampler was created, a compatible set of callbacks must: be provided here * [[VUID-vkDestroySampler-sampler-01084]] If no sname:VkAllocationCallbacks were provided when pname:sampler was created, pname:pAllocator must: be `NULL` **** include::../validity/protos/vkDestroySampler.txt[]