// Copyright (c) 2015-2017 The Khronos Group Inc. // Copyright notice at https://www.khronos.org/registry/speccopyright.html [[primsrast]] = Rasterization Rasterization is the process by which a primitive is converted to a two-dimensional image. Each point of this image contains associated data such as depth, color, or other attributes. Rasterizing a primitive begins by determining which squares of an integer grid in framebuffer coordinates are occupied by the primitive, and assigning one or more depth values to each such square. This process is described below for points, lines, and polygons. A grid square, including its [eq]#(x,y)# framebuffer coordinates, [eq]#z# (depth), and associated data added by fragment shaders, is called a fragment. A fragment is located by its upper left corner, which lies on integer grid coordinates. Rasterization operations also refer to a fragment's sample locations, which are offset by subpixel fractional values from its upper left corner. The rasterization rules for points, lines, and triangles involve testing whether each sample location is inside the primitive. Fragments need not actually be square, and rasterization rules are not affected by the aspect ratio of fragments. Display of non-square grids, however, will cause rasterized points and line segments to appear fatter in one direction than the other. We assume that fragments are square, since it simplifies antialiasing and texturing. After rasterization, fragments are processed by the <>, if enabled. Several factors affect rasterization, including the members of sname:VkPipelineRasterizationStateCreateInfo and sname:VkPipelineMultisampleStateCreateInfo. // refBegin VkPipelineRasterizationStateCreateInfo Structure specifying parameters of a newly created pipeline rasterization state The sname:VkPipelineRasterizationStateCreateInfo structure is defined as: include::../api/structs/VkPipelineRasterizationStateCreateInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is reserved for future use. * pname:depthClampEnable controls whether to clamp the fragment's depth values instead of clipping primitives to the z planes of the frustum, as described in <>. * pname:rasterizerDiscardEnable controls whether primitives are discarded immediately before the rasterization stage. * pname:polygonMode is the triangle rendering mode. See elink:VkPolygonMode. * pname:cullMode is the triangle facing direction used for primitive culling. See elink:VkCullModeFlagBits. * pname:frontFace is a elink:VkFrontFace value specifying the front-facing triangle orientation to be used for culling. * pname:depthBiasEnable controls whether to bias fragment depth values. * pname:depthBiasConstantFactor is a scalar factor controlling the constant depth value added to each fragment. * pname:depthBiasClamp is the maximum (or minimum) depth bias of a fragment. * pname:depthBiasSlopeFactor is a scalar factor applied to a fragment's slope in depth bias calculations. * pname:lineWidth is the width of rasterized line segments. ifdef::VK_AMD_rasterization_order[] The application can: also add a sname:VkPipelineRasterizationStateRasterizationOrderAMD structure to the pname:pNext chain of a sname:VkPipelineRasterizationStateCreateInfo structure. This structure enables selecting the rasterization order to use when rendering with the corresponding graphics pipeline as described in <>. endif::VK_AMD_rasterization_order[] .Valid Usage **** * [[VUID-VkPipelineRasterizationStateCreateInfo-depthClampEnable-00782]] If the <> feature is not enabled, pname:depthClampEnable must: be ename:VK_FALSE * [[VUID-VkPipelineRasterizationStateCreateInfo-polygonMode-00783]] If the <> feature is not enabled, pname:polygonMode must: be ename:VK_POLYGON_MODE_FILL **** include::../validity/structs/VkPipelineRasterizationStateCreateInfo.txt[] // refBegin VkPipelineMultisampleStateCreateInfo Structure specifying parameters of a newly created pipeline multisample state The sname:VkPipelineMultisampleStateCreateInfo structure is defined as: include::../api/structs/VkPipelineMultisampleStateCreateInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is reserved for future use. * pname:rasterizationSamples is a elink:VkSampleCountFlagBits specifying the number of samples per pixel used in rasterization. * pname:sampleShadingEnable specifies that fragment shading executes per-sample if ename:VK_TRUE, or per-fragment if ename:VK_FALSE, as described in <>. * pname:minSampleShading is the minimum fraction of sample shading, as described in <>. * pname:pSampleMask is a bitmask of static coverage information that is ANDed with the coverage information generated during rasterization, as described in <>. * pname:alphaToCoverageEnable controls whether a temporary coverage value is generated based on the alpha component of the fragment's first color output as specified in the <> section. * pname:alphaToOneEnable controls whether the alpha component of the fragment's first color output is replaced with one as described in <>. .Valid Usage **** * [[VUID-VkPipelineMultisampleStateCreateInfo-sampleShadingEnable-00784]] If the <> feature is not enabled, pname:sampleShadingEnable must: be ename:VK_FALSE * [[VUID-VkPipelineMultisampleStateCreateInfo-alphaToOneEnable-00785]] If the <> feature is not enabled, pname:alphaToOneEnable must: be ename:VK_FALSE * [[VUID-VkPipelineMultisampleStateCreateInfo-minSampleShading-00786]] pname:minSampleShading must: be in the range [eq]#[0,1]# **** include::../validity/structs/VkPipelineMultisampleStateCreateInfo.txt[] Rasterization only produces fragments corresponding to pixels in the framebuffer. Fragments which would be produced by application of any of the primitive rasterization rules described below but which lie outside the framebuffer are not produced, nor are they processed by any later stage of the pipeline, including any of the early per-fragment tests described in <>. Surviving fragments are processed by fragment shaders. Fragment shaders determine associated data for fragments, and can: also modify or replace their assigned depth values. If the subpass for which this pipeline is being created uses color and/or depth/stencil attachments, then pname:rasterizationSamples must: be the same as the sample count for those subpass attachments. Otherwise, pname:rasterizationSamples must: follow the rules for a <>. [[primsrast-discard]] == Discarding Primitives Before Rasterization Primitives are discarded before rasterization if the pname:rasterizerDiscardEnable member of slink:VkPipelineRasterizationStateCreateInfo is enabled. When enabled, primitives are discarded after they are processed by the last active shader stage in the pipeline before rasterization. [[primrast-order]] == Rasterization Order Within a subpass of a <>, for a given (x,y,layer,sample) sample location, the following operations are guaranteed to execute in _rasterization order_, for each separate primitive that includes that sample location: . <> . <>) . <> . <> . <> . <> for <> . <>, <>, and color writes Each of these operations is atomically executed for each primitive and sample location. Execution of these operations for each primitive in a subpass occurs in ifndef::VK_AMD_rasterization_order[] <>. endif::VK_AMD_rasterization_order[] ifdef::VK_AMD_rasterization_order[] an order determined by the application. // refBegin VkPipelineRasterizationStateRasterizationOrderAMD Structure defining rasterization order for a graphics pipeline The rasterization order to use for a graphics pipeline is specified by adding a sname:VkPipelineRasterizationStateRasterizationOrderAMD structure to the pname:pNext chain of a slink:VkPipelineRasterizationStateCreateInfo structure. The sname:VkPipelineRasterizationStateRasterizationOrderAMD structure is defined as: include::../api/structs/VkPipelineRasterizationStateRasterizationOrderAMD.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:rasterizationOrder is a elink:VkRasterizationOrderAMD value specifying the primitive rasterization order to use. include::../validity/structs/VkPipelineRasterizationStateRasterizationOrderAMD.txt[] If the +VK_AMD_rasterization_order+ device extension is not enabled or the application does not request a particular rasterization order through specifying a sname:VkPipelineRasterizationStateRasterizationOrderAMD structure then the rasterization order used by the graphics pipeline defaults to ename:VK_RASTERIZATION_ORDER_STRICT_AMD. // refEnd VkPipelineRasterizationStateRasterizationOrderAMD // refBegin VkRasterizationOrderAMD Specify rasterization order for a graphics pipeline Possible values of slink:VkPipelineRasterizationStateRasterizationOrderAMD::pname:rasterizationOrder, specifying the primitive rasterization order, are: include::../api/enums/VkRasterizationOrderAMD.txt[] * ename:VK_RASTERIZATION_ORDER_STRICT_AMD specifies that operations for each primitive in a subpass must: occur in <>. * ename:VK_RASTERIZATION_ORDER_RELAXED_AMD specifies that operations for each primitive in a subpass may: not occur in <>. // refEnd VkRasterizationOrderAMD endif::VK_AMD_rasterization_order[] [[primsrast-multisampling]] == Multisampling Multisampling is a mechanism to antialias all Vulkan primitives: points, lines, and polygons. The technique is to sample all primitives multiple times at each pixel. Each sample in each framebuffer attachment has storage for a color, depth, and/or stencil value, such that per-fragment operations apply to each sample independently. The color sample values can: be later _resolved_ to a single color (see <> and the <> chapter for more details on how to resolve multisample images to non-multisample images). Vulkan defines rasterization rules for single-sample modes in a way that is equivalent to a multisample mode with a single sample in the center of each pixel. Each fragment includes a coverage value with pname:rasterizationSamples bits (see <>). Each fragment includes pname:rasterizationSamples depth values and sets of associated data. An implementation may: choose to assign the same associated data to more than one sample. The location for evaluating such associated data may: be anywhere within the pixel including the pixel center or any of the sample locations. When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel center must: be used. The different associated data values need not all be evaluated at the same location. Each pixel fragment thus consists of integer x and y grid coordinates, pname:rasterizationSamples depth values and sets of associated data, and a coverage value with pname:rasterizationSamples bits. It is understood that each pixel has pname:rasterizationSamples locations associated with it. These locations are exact positions, rather than regions or areas, and each is referred to as a sample point. The sample points associated with a pixel must: be located inside or on the boundary of the unit square that is considered to bound the pixel. Furthermore, the relative locations of sample points may: be identical for each pixel in the framebuffer, or they may: differ. If the current pipeline includes a fragment shader with one or more variables in its interface decorated with code:Sample and code:Input, the data associated with those variables will be assigned independently for each sample. The values for each sample must: be evaluated at the location of the sample. The data associated with any other variables not decorated with code:Sample and code:Input need not be evaluated independently for each sample. If the pname:standardSampleLocations member of slink:VkPhysicalDeviceLimits is ename:VK_TRUE, then the sample counts ename:VK_SAMPLE_COUNT_1_BIT, ename:VK_SAMPLE_COUNT_2_BIT, ename:VK_SAMPLE_COUNT_4_BIT, ename:VK_SAMPLE_COUNT_8_BIT, and ename:VK_SAMPLE_COUNT_16_BIT have sample locations as listed in the following table, with the [eq]##i##th entry in the table corresponding to bit [eq]#i# in the sample masks. ename:VK_SAMPLE_COUNT_32_BIT and ename:VK_SAMPLE_COUNT_64_BIT do not have standard sample locations. Locations are defined relative to an origin in the upper left corner of the pixel. <<< .Standard sample locations [align="center"] |==== |ename:VK_SAMPLE_COUNT_1_BIT|ename:VK_SAMPLE_COUNT_2_BIT|ename:VK_SAMPLE_COUNT_4_BIT|ename:VK_SAMPLE_COUNT_8_BIT|ename:VK_SAMPLE_COUNT_16_BIT | [eq]#(0.5,0.5)# | [eq]#(0.25,0.25)# + [eq]#(0.75,0.75)# | [eq]#(0.375, 0.125)# + [eq]#(0.875, 0.375)# + [eq]#(0.125, 0.625)# + [eq]#(0.625, 0.875)# | [eq]#(0.5625, 0.3125)# + [eq]#(0.4375, 0.6875)# + [eq]#(0.8125, 0.5625)# + [eq]#(0.3125, 0.1875)# + [eq]#(0.1875, 0.8125)# + [eq]#(0.0625, 0.4375)# + [eq]#(0.6875, 0.9375)# + [eq]#(0.9375, 0.0625)# | [eq]#(0.5625, 0.5625)# + [eq]#(0.4375, 0.3125)# + [eq]#(0.3125, 0.625)# + [eq]#(0.75, 0.4375)# + [eq]#(0.1875, 0.375)# + [eq]#(0.625, 0.8125)# + [eq]#(0.8125, 0.6875)# + [eq]#(0.6875, 0.1875)# + [eq]#(0.375, 0.875)# + [eq]#(0.5, 0.0625)# + [eq]#(0.25, 0.125)# + [eq]#(0.125, 0.75)# + [eq]#(0.0, 0.5)# + [eq]#(0.9375, 0.25)# + [eq]#(0.875, 0.9375)# + [eq]#(0.0625, 0.0)# |==== [[primsrast-sampleshading]] == Sample Shading Sample shading can: be used to specify a minimum number of unique samples to process for each fragment. Sample shading is controlled by the pname:sampleShadingEnable member of slink:VkPipelineMultisampleStateCreateInfo. If pname:sampleShadingEnable is ename:VK_FALSE, sample shading is considered disabled and has no effect. Otherwise, an implementation must: provide a minimum of [eq]#max({lceil} pname:minSampleShading {times} pname:rasterizationSamples {rceil}, 1)# unique associated data for each fragment, where pname:minSampleShading is the minimum fraction of sample shading and pname:rasterizationSamples is the number of samples requested in slink:VkPipelineMultisampleStateCreateInfo. These are associated with the samples in an implementation-dependent manner. When the sample shading fraction is 1.0, a separate set of associated data are evaluated for each sample, and each set of values is evaluated at the sample location. [[primsrast-points]] == Points A point is drawn by generating a set of fragments in the shape of a square centered around the vertex of the point. Each vertex has an associated point size that controls the width/height of that square. The point size is taken from the (potentially clipped) shader built-in code:PointSize written by: * the geometry shader, if active; * the tessellation evaluation shader, if active and no geometry shader is active; * the tessellation control shader, if active and no geometry or tessellation evaluation shader is active; or * the vertex shader, otherwise and clamped to the implementation-dependent point size range [eq]#[pname:pointSizeRange[0],pname:pointSizeRange[1]]#. If the value written to code:PointSize is less than or equal to zero, or if no value was written to code:PointSize, results are undefined. Not all point sizes need be supported, but the size 1.0 must: be supported. The range of supported sizes and the size of evenly-spaced gradations within that range are implementation-dependent. The range and gradations are obtained from the pname:pointSizeRange and pname:pointSizeGranularity members of slink:VkPhysicalDeviceLimits. If, for instance, the size range is from 0.1 to 2.0 and the gradation size is 0.1, then the size 0.1, 0.2, ..., 1.9, 2.0 are supported. Additional point sizes may: also be supported. There is no requirement that these sizes be equally spaced. If an unsupported size is requested, the nearest supported size is used instead. [[primsrast-points-basic]] === Basic Point Rasterization Point rasterization produces a fragment for each framebuffer pixel with one or more sample points that intersect a region centered at the point's [eq]#(x~f~,y~f~)#. This region is a square with side equal to the current point size. Coverage bits that correspond to sample points that intersect the region are 1, other coverage bits are 0. All fragments produced in rasterizing a point are assigned the same associated data, which are those of the vertex corresponding to the point. However, the fragment shader built-in code:PointCoord contains point sprite texture coordinates. The [eq]#s# and [eq]#t# point sprite texture coordinates vary from zero to one across the point horizontally left-to-right and top-to-bottom, respectively. The following formulas are used to evaluate [eq]#s# and [eq]#t#: [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ s = {1 \over 2} + { \left( x_p - x_f \right) \over \text{size} } ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ t = {1 \over 2} + { \left( y_p - y_f \right) \over \text{size} } ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ where size is the point's size, [eq]#(x~p~,y~p~)# is the location at which the point sprite coordinates are evaluated - this may: be the framebuffer coordinates of the pixel center (i.e. at the half-integer) or the location of a sample, and [eq]#(x~f~,y~f~)# is the exact, unrounded framebuffer coordinate of the vertex for the point. When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel center must: be used. [[primsrast-lines]] == Line Segments A line is drawn by generating a set of fragments overlapping a rectangle centered on the line segment. Each line segment has an associated width that controls the width of that rectangle. // refBegin vkCmdSetLineWidth Set the dynamic line width state The line width is specified by the slink:VkPipelineRasterizationStateCreateInfo::pname:lineWidth property of the currently active pipeline, if the pipeline was not created with ename:VK_DYNAMIC_STATE_LINE_WIDTH enabled. Otherwise, the line width is set by calling fname:vkCmdSetLineWidth: include::../api/protos/vkCmdSetLineWidth.txt[] * pname:commandBuffer is the command buffer into which the command will be recorded. * pname:lineWidth is the width of rasterized line segments. .Valid Usage **** * [[VUID-vkCmdSetLineWidth-None-00787]] The currently bound graphics pipeline must: have been created with the ename:VK_DYNAMIC_STATE_LINE_WIDTH dynamic state enabled * [[VUID-vkCmdSetLineWidth-lineWidth-00788]] If the <> feature is not enabled, pname:lineWidth must: be `1.0` **** include::../validity/protos/vkCmdSetLineWidth.txt[] Not all line widths need be supported for line segment rasterization, but width 1.0 antialiased segments must: be provided. The range and gradations are obtained from the pname:lineWidthRange and pname:lineWidthGranularity members of slink:VkPhysicalDeviceLimits. If, for instance, the size range is from 0.1 to 2.0 and the gradation size is 0.1, then the size 0.1, 0.2, ..., 1.9, 2.0 are supported. Additional line widths may: also be supported. There is no requirement that these widths be equally spaced. If an unsupported width is requested, the nearest supported width is used instead. [[primsrast-lines-basic]] === Basic Line Segment Rasterization Rasterized line segments produce fragments which intersect a rectangle centered on the line segment. Two of the edges are parallel to the specified line segment; each is at a distance of one-half the current width from that segment in directions perpendicular to the direction of the line. The other two edges pass through the line endpoints and are perpendicular to the direction of the specified line segment. Coverage bits that correspond to sample points that intersect the rectangle are 1, other coverage bits are 0. Next we specify how the data associated with each rasterized fragment are obtained. Let [eq]#**p**~r~ = (x~d~, y~d~)# be the framebuffer coordinates at which associated data are evaluated. This may: be the pixel center of a fragment or the location of a sample within the fragment. When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel center must: be used. Let [eq]#**p**~a~ = (x~a~, y~a~)# and [eq]#**p**~b~ = (x~b~,y~b~)# be initial and final endpoints of the line segment, respectively. Set // Equation {linet:eq} [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ t = {{( \mathbf{p}_r - \mathbf{p}_a ) \cdot ( \mathbf{p}_b - \mathbf{p}_a )} \over {\| \mathbf{p}_b - \mathbf{p}_a \|^2 }} ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ (Note that [eq]#t = 0# at [eq]#**p**_a# and [eq]#t = 1# at [eq]#**p**~b~#. Also note that this calculation projects the vector from [eq]#**p**~a~# to [eq]#**p**~r~# onto the line, and thus computes the normalized distance of the fragment along the line.) [[line_perspective_interpolation]] The value of an associated datum [eq]#f# for the fragment, whether it be a shader output or the clip [eq]#w# coordinate, must: be determined using _perspective interpolation_: [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ f = {{ (1-t) {f_a / w_a} + t { f_b / w_b} } \over {(1-t) / w_a + t / w_b }} ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ where [eq]#f~a~# and [eq]#f~b~# are the data associated with the starting and ending endpoints of the segment, respectively; [eq]#w~a~# and [eq]#w~b~# are the clip [eq]#w# coordinates of the starting and ending endpoints of the segments, respectively. [[line_linear_interpolation]] Depth values for lines must: be determined using _linear interpolation_: :: [eq]#z = (1 - t) z~a~ {plus} t z~b~# where [eq]#z~a~# and [eq]#z~b~# are the depth values of the starting and ending endpoints of the segment, respectively. The code:NoPerspective and code:Flat <> can: be used with fragment shader inputs to declare how they are interpolated. When neither decoration is applied, <> is performed as described above. When the code:NoPerspective decoration is used, <> is performed in the same fashion as for depth values, as described above. When the code:Flat decoration is used, no interpolation is performed, and outputs are taken from the corresponding input value of the <> corresponding to that primitive. The above description documents the preferred method of line rasterization, and must: be used when the implementation advertises the pname:strictLines limit in slink:VkPhysicalDeviceLimits as ename:VK_TRUE. When pname:strictLines is ename:VK_FALSE, the edges of the lines are generated as a parallelogram surrounding the original line. The major axis is chosen by noting the axis in which there is the greatest distance between the line start and end points. If the difference is equal in both directions then the X axis is chosen as the major axis. Edges 2 and 3 are aligned to the minor axis and are centered on the endpoints of the line as in <>, and each is pname:lineWidth long. Edges 0 and 1 are parallel to the line and connect the endpoints of edges 2 and 3. Coverage bits that correspond to sample points that intersect the parallelogram are 1, other coverage bits are 0. Samples that fall exactly on the edge of the parallelogram follow the polygon rasterization rules. Interpolation occurs as if the parallelogram was decomposed into two triangles where each pair of vertices at each end of the line has identical attributes. [[fig-non-strict-lines]] image::images/non_strict_lines.svg[align="center",title="Non strict lines",{fullimagewidth}] [[primsrast-polygons]] == Polygons A polygon results from the decomposition of a triangle strip, triangle fan or a series of independent triangles. Like points and line segments, polygon rasterization is controlled by several variables in the slink:VkPipelineRasterizationStateCreateInfo structure. [[primsrast-polygons-basic]] === Basic Polygon Rasterization // refBegin VkFrontFace Interpret polygon front-facing orientation The first step of polygon rasterization is to determine whether the triangle is _back-facing_ or _front-facing_. This determination is made based on the sign of the (clipped or unclipped) polygon's area computed in framebuffer coordinates. One way to compute this area is: [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ a = -{1 \over 2}\sum_{i=0}^{n-1} x_f^i y_f^{i \oplus 1} - x_f^{i \oplus 1} y_f^i ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ where latexmath:[x_f^i] and latexmath:[y_f^i] are the [eq]#x# and [eq]#y# framebuffer coordinates of the [eq]##i##th vertex of the [eq]#n#-vertex polygon (vertices are numbered starting at zero for the purposes of this computation) and [eq]#i {oplus} 1# is [eq]#(i {plus} 1) mod n#. The interpretation of the sign of [eq]#a# is determined by the slink:VkPipelineRasterizationStateCreateInfo::pname:frontFace property of the currently active pipeline. Possible values are: include::../api/enums/VkFrontFace.txt[] * ename:VK_FRONT_FACE_COUNTER_CLOCKWISE specifies that a triangle with positive area is considered front-facing. * ename:VK_FRONT_FACE_CLOCKWISE specifies that a triangle with negative area is considered front-facing. Any triangle which is not front-facing is back-facing, including zero-area triangles. // refEnd VkFrontFace // refBegin VkCullModeFlagBits Bitmask controlling triangle culling Once the orientation of triangles is determined, they are culled according to the slink:VkPipelineRasterizationStateCreateInfo::pname:cullMode property of the currently active pipeline. Possible values are: include::../api/enums/VkCullModeFlagBits.txt[] * ename:VK_CULL_MODE_NONE specifies that no triangles are discarded * ename:VK_CULL_MODE_FRONT_BIT specifies that front-facing triangles are discarded * ename:VK_CULL_MODE_BACK_BIT specifies that back-facing triangles are discarded * ename:VK_CULL_MODE_FRONT_AND_BACK specifies that all triangles are discarded. Following culling, fragments are produced for any triangles which have not been discarded. // refEnd VkCullModeFlagBits The rule for determining which fragments are produced by polygon rasterization is called _point sampling_. The two-dimensional projection obtained by taking the x and y framebuffer coordinates of the polygon's vertices is formed. Fragments are produced for any pixels for which any sample points lie inside of this polygon. Coverage bits that correspond to sample points that satisfy the point sampling criteria are 1, other coverage bits are 0. Special treatment is given to a sample whose sample location lies on a polygon edge. In such a case, if two polygons lie on either side of a common edge (with identical endpoints) on which a sample point lies, then exactly one of the polygons must: result in a covered sample for that fragment during rasterization. As for the data associated with each fragment produced by rasterizing a polygon, we begin by specifying how these values are produced for fragments in a triangle. Define _barycentric coordinates_ for a triangle. Barycentric coordinates are a set of three numbers, [eq]#a#, [eq]#b#, and [eq]#c#, each in the range [eq]#[0,1]#, with [eq]#a {plus} b {plus} c = 1#. These coordinates uniquely specify any point [eq]#p# within the triangle or on the triangle's boundary as :: [eq]#p = a p~a~ {plus} b p~b~ {plus} c p~c~# where [eq]#p~a~#, [eq]#p~b~#, and [eq]#p~c~# are the vertices of the triangle. [eq]#a#, [eq]#b#, and [eq]#c# are determined by: [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ a = {{\mathrm{A}(p p_b p_c)} \over {\mathrm{A}(p_a p_b p_c)}}, \quad b = {{\mathrm{A}(p p_a p_c)} \over {\mathrm{A}(p_a p_b p_c)}}, \quad c = {{\mathrm{A}(p p_a p_b)} \over {\mathrm{A}(p_a p_b p_c)}}, ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ where [eq]#A(lmn)# denotes the area in framebuffer coordinates of the triangle with vertices [eq]#l#, [eq]#m#, and [eq]#n#. Denote an associated datum at [eq]#p~a~#, [eq]#p~b~#, or [eq]#p~c~# as [eq]#f~a~#, [eq]#f~b~#, or [eq]#f~c~#, respectively. [[triangle_perspective_interpolation]] The value of an associated datum [eq]#f# for a fragment produced by rasterizing a triangle, whether it be a shader output or the clip [eq]#w# coordinate, must: be determined using perspective interpolation: [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ f = { a {f_a / w_a} + b {f_b / w_b} + c {f_c / w_c} } \over { {a / w_a} + {b / w_b} + {c / w_c} } ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ where [eq]#w~a~#, [eq]#w~b~#, and [eq]#w~c~# are the clip [eq]#w# coordinates of [eq]#p~a~#, [eq]#p~b~#, and [eq]#p~c~#, respectively. [eq]#a#, [eq]#b#, and [eq]#c# are the barycentric coordinates of the location at which the data are produced - this must: be a pixel center or the location of a sample. When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel center must: be used. [[triangle_linear_interpolation]] Depth values for triangles must: be determined using linear interpolation: :: [eq]#z = a z~a~ {plus} b z~b~ {plus} c z~c~# where [eq]#z~a~#, [eq]#z~b~#, and [eq]#z~c~# are the depth values of [eq]#p~a~#, [eq]#p~b~#, and [eq]#p~c~#, respectively. The code:NoPerspective and code:Flat <> can: be used with fragment shader inputs to declare how they are interpolated. When neither decoration is applied, <> is performed as described above. When the code:NoPerspective decoration is used, <> is performed in the same fashion as for depth values, as described above. When the code:Flat decoration is used, no interpolation is performed, and outputs are taken from the corresponding input value of the <> corresponding to that primitive. ifdef::VK_AMD_shader_explicit_vertex_parameter[] When the +VK_AMD_shader_explicit_vertex_parameter+ device extension is enabled the code:CustomInterpAMD <> can: also be used with fragment shader inputs which indicate that the decorated inputs can: only be accessed by the extended instruction code:InterpolateAtVertexAMD and allows accessing the value of the inputs for individual vertices of the primitive. endif::VK_AMD_shader_explicit_vertex_parameter[] For a polygon with more than three edges, such as are produced by clipping a triangle, a convex combination of the values of the datum at the polygon's vertices must: be used to obtain the value assigned to each fragment produced by the rasterization algorithm. That is, it must: be the case that at every fragment [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ f = \sum_{i=1}^{n} a_i f_i ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ where [eq]#n# is the number of vertices in the polygon and [eq]#f~i~# is the value of [eq]#f# at vertex [eq]#i#. For each [eq]#i#, [eq]#0 {leq} a~i~ {leq} 1# and latexmath:[\sum_{i=1}^{n}a_i = 1]. The values of [eq]#a~i~# may: differ from fragment to fragment, but at vertex [eq]#i#, [eq]#a~i~ = 1# and [eq]#a~j~ = 0# for [eq]#j {neq} i#. [NOTE] .Note ==== One algorithm that achieves the required behavior is to triangulate a polygon (without adding any vertices) and then treat each triangle individually as already discussed. A scan-line rasterizer that linearly interpolates data along each edge and then linearly interpolates data across each horizontal span from edge to edge also satisfies the restrictions (in this case, the numerator and denominator of equation <> are iterated independently and a division performed for each fragment). ==== [[primsrast-polygonmode]] === Polygon Mode // refBegin VkPolygonMode Control polygon rasterization mode Possible values of the slink:VkPipelineRasterizationStateCreateInfo::pname:polygonMode property of the currently active pipeline, specifying the method of rasterization for polygons, are: include::../api/enums/VkPolygonMode.txt[] * ename:VK_POLYGON_MODE_POINT specifies that polygon vertices are drawn as points. * ename:VK_POLYGON_MODE_LINE specifies that polygon edges are drawn as line segments. * ename:VK_POLYGON_MODE_FILL specifies that polygons are rendered using the polygon rasterization rules in this section. These modes affect only the final rasterization of polygons: in particular, a polygon's vertices are shaded and the polygon is clipped and possibly culled before these modes are applied. // refEnd VkPolygonMode [[primsrast-depthbias]] === Depth Bias // refBegin vkCmdSetDepthBias Set the depth bias dynamic state The depth values of all fragments generated by the rasterization of a polygon can: be offset by a single value that is computed for that polygon. This behavior is controlled by the pname:depthBiasEnable, pname:depthBiasConstantFactor, pname:depthBiasClamp, and pname:depthBiasSlopeFactor members of slink:VkPipelineRasterizationStateCreateInfo, or by the corresponding parameters to the fname:vkCmdSetDepthBias command if depth bias state is dynamic. include::../api/protos/vkCmdSetDepthBias.txt[] * pname:commandBuffer is the command buffer into which the command will be recorded. * pname:depthBiasConstantFactor is a scalar factor controlling the constant depth value added to each fragment. * pname:depthBiasClamp is the maximum (or minimum) depth bias of a fragment. * pname:depthBiasSlopeFactor is a scalar factor applied to a fragment's slope in depth bias calculations. If pname:depthBiasEnable is ename:VK_FALSE, no depth bias is applied and the fragment's depth values are unchanged. pname:depthBiasSlopeFactor scales the maximum depth slope of the polygon, and pname:depthBiasConstantFactor scales an implementation-dependent constant that relates to the usable resolution of the depth buffer. The resulting values are summed to produce the depth bias value which is then clamped to a minimum or maximum value specified by pname:depthBiasClamp. pname:depthBiasSlopeFactor, pname:depthBiasConstantFactor, and pname:depthBiasClamp can: each be positive, negative, or zero. The maximum depth slope [eq]#m# of a triangle is [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ m = \sqrt{ \left({{\partial z_f} \over {\partial x_f}}\right)^2 + \left({{\partial z_f} \over {\partial y_f}}\right)^2} ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ where [eq]#(x~f~, y~f~, z~f~)# is a point on the triangle. [eq]#m# may: be approximated as [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ m = \max\left( \left| { {\partial z_f} \over {\partial x_f} } \right|, \left| { {\partial z_f} \over {\partial y_f} } \right| \right). ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ The minimum resolvable difference [eq]#r# is an implementation-dependent parameter that depends on the depth buffer representation. It is the smallest difference in framebuffer coordinate [eq]#z# values that is guaranteed to remain distinct throughout polygon rasterization and in the depth buffer. All pairs of fragments generated by the rasterization of two polygons with otherwise identical vertices, but [eq]#pname:z~f~# values that differ by $r$, will have distinct depth values. For fixed-point depth buffer representations, [eq]#r# is constant throughout the range of the entire depth buffer. For floating-point depth buffers, there is no single minimum resolvable difference. In this case, the minimum resolvable difference for a given polygon is dependent on the maximum exponent, [eq]#e#, in the range of [eq]#z# values spanned by the primitive. If [eq]#n# is the number of bits in the floating-point mantissa, the minimum resolvable difference, [eq]#r#, for the given primitive is defined as :: [eq]#r = 2^e-n^# If no depth buffer is present, [eq]#r# is undefined. The bias value [eq]#o# for a polygon is [latexmath] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ o = \begin{cases} m \times depthBiasSlopeFactor + r \times depthBiasConstantFactor & depthBiasClamp = 0\ or\ NaN \\ \min(m \times depthBiasSlopeFactor + r \times depthBiasConstantFactor, depthBiasClamp) & depthBiasClamp > 0 \\ \max(m \times depthBiasSlopeFactor + r \times depthBiasConstantFactor, depthBiasClamp) & depthBiasClamp < 0 \\ \end{cases} ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [eq]#m# is computed as described above. If the depth buffer uses a fixed-point representation, [eq]#m# is a function of depth values in the range [eq]#[0,1]#, and [eq]#o# is applied to depth values in the same range. For fixed-point depth buffers, fragment depth values are always limited to the range [eq]#[0,1]# by clamping after depth bias addition is performed. Fragment depth values are clamped even when the depth buffer uses a floating-point representation. .Valid Usage **** * [[VUID-vkCmdSetDepthBias-None-00789]] The currently bound graphics pipeline must: have been created with the ename:VK_DYNAMIC_STATE_DEPTH_BIAS dynamic state enabled * [[VUID-vkCmdSetDepthBias-depthBiasClamp-00790]] If the <> feature is not enabled, pname:depthBiasClamp must: be code:0.0 **** include::../validity/protos/vkCmdSetDepthBias.txt[]