// Copyright (c) 2015-2017 Khronos Group. This work is licensed under a // Creative Commons Attribution 4.0 International License; see // http://creativecommons.org/licenses/by/4.0/ [[shaders]] = Shaders A shader specifies programmable operations that execute for each vertex, control point, tessellated vertex, primitive, fragment, or workgroup in the corresponding stage(s) of the graphics and compute pipelines. Graphics pipelines include vertex shader execution as a result of <>, followed, if enabled, by tessellation control and evaluation shaders operating on <>, geometry shaders, if enabled, operating on primitives, and fragment shaders, if present, operating on fragments generated by <>. In this specification, vertex, tessellation control, tessellation evaluation and geometry shaders are collectively referred to as vertex processing stages and occur in the logical pipeline before rasterization. The fragment shader occurs logically after rasterization. Only the compute shader stage is included in a compute pipeline. Compute shaders operate on compute invocations in a workgroup. Shaders can: read from input variables, and read from and write to output variables. Input and output variables can: be used to transfer data between shader stages, or to allow the shader to interact with values that exist in the execution environment. Similarly, the execution environment provides constants that describe capabilities. Shader variables are associated with execution environment-provided inputs and outputs using _built-in_ decorations in the shader. The available decorations for each stage are documented in the following subsections. [[shader-modules]] == Shader Modules [open,refpage='VkShaderModule',desc='Opaque handle to a shader module object',type='handles'] -- _Shader modules_ contain _shader code_ and one or more entry points. Shaders are selected from a shader module by specifying an entry point as part of <> creation. The stages of a pipeline can: use shaders that come from different modules. The shader code defining a shader module must: be in the SPIR-V format, as described by the <> appendix. Shader modules are represented by sname:VkShaderModule handles: include::../api/handles/VkShaderModule.txt[] -- [open,refpage='vkCreateShaderModule',desc='Creates a new shader module object',type='protos'] -- To create a shader module, call: include::../api/protos/vkCreateShaderModule.txt[] * pname:device is the logical device that creates the shader module. * pname:pCreateInfo parameter is a pointer to an instance of the sname:VkShaderModuleCreateInfo structure. * pname:pAllocator controls host memory allocation as described in the <> chapter. * pname:pShaderModule points to a sname:VkShaderModule handle in which the resulting shader module object is returned. Once a shader module has been created, any entry points it contains can: be used in pipeline shader stages as described in <> and <>. ifdef::VK_NV_glsl_shader[] If the shader stage fails to compile ename:VK_ERROR_INVALID_SHADER_NV will be generated and the compile log will be reported back to the application by <> if enabled. endif::VK_NV_glsl_shader[] include::../validity/protos/vkCreateShaderModule.txt[] -- [open,refpage='VkShaderModuleCreateInfo',desc='Structure specifying parameters of a newly created shader module',type='structs'] -- The sname:VkShaderModuleCreateInfo structure is defined as: include::../api/structs/VkShaderModuleCreateInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is reserved for future use. * pname:codeSize is the size, in bytes, of the code pointed to by pname:pCode. * pname:pCode points to code that is used to create the shader module. The type and format of the code is determined from the content of the memory addressed by pname:pCode. .Valid Usage **** * [[VUID-VkShaderModuleCreateInfo-codeSize-01085]] pname:codeSize must: be greater than 0 ifndef::VK_NV_glsl_shader[] * [[VUID-VkShaderModuleCreateInfo-codeSize-01086]] pname:codeSize must: be a multiple of 4 * [[VUID-VkShaderModuleCreateInfo-pCode-01087]] pname:pCode must: point to valid SPIR-V code, formatted and packed as described by the <> * [[VUID-VkShaderModuleCreateInfo-pCode-01088]] pname:pCode must: adhere to the validation rules described by the <> section of the <> appendix endif::VK_NV_glsl_shader[] ifdef::VK_NV_glsl_shader[] * [[VUID-VkShaderModuleCreateInfo-pCode-01376]] If pname:pCode points to SPIR-V code, pname:codeSize must: be a multiple of 4 * [[VUID-VkShaderModuleCreateInfo-pCode-01377]] pname:pCode must: point to either valid SPIR-V code, formatted and packed as described by the <> or valid GLSL code which must: be written to the +GL_KHR_vulkan_glsl+ extension specification * [[VUID-VkShaderModuleCreateInfo-pCode-01378]] If pname:pCode points to SPIR-V code, that code must: adhere to the validation rules described by the <> section of the <> appendix * [[VUID-VkShaderModuleCreateInfo-pCode-01379]] If pname:pCode points to GLSL code, it must: be valid GLSL code written to the +GL_KHR_vulkan_glsl+ GLSL extension specification endif::VK_NV_glsl_shader[] * [[VUID-VkShaderModuleCreateInfo-pCode-01089]] pname:pCode must: declare the code:Shader capability for SPIR-V code * [[VUID-VkShaderModuleCreateInfo-pCode-01090]] pname:pCode must: not declare any capability that is not supported by the API, as described by the <> section of the <> appendix * [[VUID-VkShaderModuleCreateInfo-pCode-01091]] If pname:pCode declares any of the capabilities that are listed as not required by the implementation, the relevant feature must: be enabled, as listed in the <> appendix **** include::../validity/structs/VkShaderModuleCreateInfo.txt[] -- ifdef::VK_EXT_validation_cache[] include::VK_EXT_validation_cache/shader-module-validation-cache.txt[] endif::VK_EXT_validation_cache[] [open,refpage='vkDestroyShaderModule',desc='Destroy a shader module module',type='protos'] -- To destroy a shader module, call: include::../api/protos/vkDestroyShaderModule.txt[] * pname:device is the logical device that destroys the shader module. * pname:shaderModule is the handle of the shader module to destroy. * pname:pAllocator controls host memory allocation as described in the <> chapter. A shader module can: be destroyed while pipelines created using its shaders are still in use. .Valid Usage **** * [[VUID-vkDestroyShaderModule-shaderModule-01092]] If sname:VkAllocationCallbacks were provided when pname:shaderModule was created, a compatible set of callbacks must: be provided here * [[VUID-vkDestroyShaderModule-shaderModule-01093]] If no sname:VkAllocationCallbacks were provided when pname:shaderModule was created, pname:pAllocator must: be `NULL` **** include::../validity/protos/vkDestroyShaderModule.txt[] -- [[shaders-execution]] == Shader Execution At each stage of the pipeline, multiple invocations of a shader may: execute simultaneously. Further, invocations of a single shader produced as the result of different commands may: execute simultaneously. The relative execution order of invocations of the same shader type is undefined. Shader invocations may: complete in a different order than that in which the primitives they originated from were drawn or dispatched by the application. However, fragment shader outputs are written to attachments in <>. The relative order of invocations of different shader types is largely undefined. However, when invoking a shader whose inputs are generated from a previous pipeline stage, the shader invocations from the previous stage are guaranteed to have executed far enough to generate input values for all required inputs. [[shaders-execution-memory-ordering]] == Shader Memory Access Ordering The order in which image or buffer memory is read or written by shaders is largely undefined. For some shader types (vertex, tessellation evaluation, and in some cases, fragment), even the number of shader invocations that may: perform loads and stores is undefined. In particular, the following rules apply: * <> and <> shaders will be invoked at least once for each unique vertex, as defined in those sections. * <> shaders will be invoked zero or more times, as defined in that section. * The relative order of invocations of the same shader type are undefined. A store issued by a shader when working on primitive B might complete prior to a store for primitive A, even if primitive A is specified prior to primitive B. This applies even to fragment shaders; while fragment shader outputs are always written to the framebuffer in <>, stores executed by fragment shader invocations are not. * The relative order of invocations of different shader types is largely undefined. [NOTE] .Note ==== The above limitations on shader invocation order make some forms of synchronization between shader invocations within a single set of primitives unimplementable. For example, having one invocation poll memory written by another invocation assumes that the other invocation has been launched and will complete its writes in finite time. ==== Stores issued to different memory locations within a single shader invocation may: not be visible to other invocations, or may: not become visible in the order they were performed. The code:OpMemoryBarrier instruction can: be used to provide stronger ordering of reads and writes performed by a single invocation. code:OpMemoryBarrier guarantees that any memory transactions issued by the shader invocation prior to the instruction complete prior to the memory transactions issued after the instruction. Memory barriers are needed for algorithms that require multiple invocations to access the same memory and require the operations to be performed in a partially-defined relative order. For example, if one shader invocation does a series of writes, followed by an code:OpMemoryBarrier instruction, followed by another write, then the results of the series of writes before the barrier become visible to other shader invocations at a time earlier or equal to when the results of the final write become visible to those invocations. In practice it means that another invocation that sees the results of the final write would also see the previous writes. Without the memory barrier, the final write may: be visible before the previous writes. Writes that are the result of shader stores through a variable decorated with code:Coherent automatically have available writes to the same buffer, buffer view, or image view made visible to them, and are themselves automatically made available to access by the same buffer, buffer view, or image view. Reads that are the result of shader loads through a variable decorated with code:Coherent automatically have available writes to the same buffer, buffer view, or image view made visible to them. The order that coherent writes to different locations become available is undefined, unless enforced by a memory barrier instruction or other memory dependency. [NOTE] .Note ==== Explicit memory dependencies must: still be used to guarantee availability and visibility for access via other buffers, buffer views, or image views. ==== The built-in atomic memory transaction instructions can: be used to read and write a given memory address atomically. While built-in atomic functions issued by multiple shader invocations are executed in undefined order relative to each other, these functions perform both a read and a write of a memory address and guarantee that no other memory transaction will write to the underlying memory between the read and write. Atomic operations ensure automatic availability and visibility for writes and reads in the same way as those to code:Coherent variables. [NOTE] .Note ==== Memory accesses performed on different resource descriptors with the same memory backing may: not be well-defined even with the code:Coherent decoration or via atomics, due to things such as image layouts or ownership of the resource - as described in the <> chapter. ==== [NOTE] .Note ==== Atomics allow shaders to use shared global addresses for mutual exclusion or as counters, among other uses. ==== [[shaders-inputs]] == Shader Inputs and Outputs Data is passed into and out of shaders using variables with input or output storage class, respectively. User-defined inputs and outputs are connected between stages by matching their code:Location decorations. Additionally, data can: be provided by or communicated to special functions provided by the execution environment using code:BuiltIn decorations. In many cases, the same code:BuiltIn decoration can: be used in multiple shader stages with similar meaning. The specific behavior of variables decorated as code:BuiltIn is documented in the following sections. [[shaders-vertex]] == Vertex Shaders Each vertex shader invocation operates on one vertex and its associated <> data, and outputs one vertex and associated data. Graphics pipelines must: include a vertex shader, and the vertex shader stage is always the first shader stage in the graphics pipeline. [[shaders-vertex-execution]] === Vertex Shader Execution A vertex shader must: be executed at least once for each vertex specified by a draw command. ifdef::VK_KHX_multiview[] If the subpass includes multiple views in its view mask, the shader may: be invoked separately for each view. endif::VK_KHX_multiview[] During execution, the shader is presented with the index of the vertex and instance for which it has been invoked. Input variables declared in the vertex shader are filled by the implementation with the values of vertex attributes associated with the invocation being executed. If the same vertex is specified multiple times in a draw command (e.g. by including the same index value multiple times in an index buffer) the implementation may: reuse the results of vertex shading if it can statically determine that the vertex shader invocations will produce identical results. [NOTE] .Note ================== It is implementation-dependent when and if results of vertex shading are reused, and thus how many times the vertex shader will be executed. This is true also if the vertex shader contains stores or atomic operations (see <>). ================== [[shaders-tessellation-control]] == Tessellation Control Shaders The tessellation control shader is used to read an input patch provided by the application and to produce an output patch. Each tessellation control shader invocation operates on an input patch (after all control points in the patch are processed by a vertex shader) and its associated data, and outputs a single control point of the output patch and its associated data, and can: also output additional per-patch data. The input patch is sized according to the pname:patchControlPoints member of slink:VkPipelineTessellationStateCreateInfo, as part of input assembly. The size of the output patch is controlled by the code:OpExecutionMode code:OutputVertices specified in the tessellation control or tessellation evaluation shaders, which must: be specified in at least one of the shaders. The size of the input and output patches must: each be greater than zero and less than or equal to sname:VkPhysicalDeviceLimits::pname:maxTessellationPatchSize. [[shaders-tessellation-control-execution]] === Tessellation Control Shader Execution A tessellation control shader is invoked at least once for each _output_ vertex in a patch. ifdef::VK_KHX_multiview[] If the subpass includes multiple views in its view mask, the shader may: be invoked separately for each view. endif::VK_KHX_multiview[] Inputs to the tessellation control shader are generated by the vertex shader. Each invocation of the tessellation control shader can: read the attributes of any incoming vertices and their associated data. The invocations corresponding to a given patch execute logically in parallel, with undefined relative execution order. However, the code:OpControlBarrier instruction can: be used to provide limited control of the execution order by synchronizing invocations within a patch, effectively dividing tessellation control shader execution into a set of phases. Tessellation control shaders will read undefined values if one invocation reads a per-vertex or per-patch attribute written by another invocation at any point during the same phase, or if two invocations attempt to write different values to the same per-patch output in a single phase. [[shaders-tessellation-evaluation]] == Tessellation Evaluation Shaders The Tessellation Evaluation Shader operates on an input patch of control points and their associated data, and a single input barycentric coordinate indicating the invocation's relative position within the subdivided patch, and outputs a single vertex and its associated data. [[shaders-tessellation-evaluation-execution]] === Tessellation Evaluation Shader Execution A tessellation evaluation shader is invoked at least once for each unique vertex generated by the tessellator. ifdef::VK_KHX_multiview[] If the subpass includes multiple views in its view mask, the shader may: be invoked separately for each view. endif::VK_KHX_multiview[] [[shaders-geometry]] == Geometry Shaders The geometry shader operates on a group of vertices and their associated data assembled from a single input primitive, and emits zero or more output primitives and the group of vertices and their associated data required for each output primitive. [[shaders-geometry-execution]] === Geometry Shader Execution A geometry shader is invoked at least once for each primitive produced by the tessellation stages, or at least once for each primitive generated by <> when tessellation is not in use. The number of geometry shader invocations per input primitive is determined from the invocation count of the geometry shader specified by the code:OpExecutionMode code:Invocations in the geometry shader. If the invocation count is not specified, then a default of one invocation is executed. ifdef::VK_KHX_multiview[] If the subpass includes multiple views in its view mask, the shader may: be invoked separately for each view. endif::VK_KHX_multiview[] [[shaders-fragment]] == Fragment Shaders Fragment shaders are invoked as the result of rasterization in a graphics pipeline. Each fragment shader invocation operates on a single fragment and its associated data. With few exceptions, fragment shaders do not have access to any data associated with other fragments and are considered to execute in isolation of fragment shader invocations associated with other fragments. [[shaders-fragment-execution]] === Fragment Shader Execution For each fragment generated by rasterization, a fragment shader may: be invoked. A fragment shader must: not be invoked if the <> cause it to have no coverage. ifdef::VK_KHX_multiview[] If the subpass includes multiple views in its view mask, the shader may: be invoked separately for each view. endif::VK_KHX_multiview[] Furthermore, if it is determined that a fragment generated as the result of rasterizing a first primitive will have its outputs entirely overwritten by a fragment generated as the result of rasterizing a second primitive in the same subpass, and the fragment shader used for the fragment has no other side effects, then the fragment shader may: not be executed for the fragment from the first primitive. Relative ordering of execution of different fragment shader invocations is not defined. The number of fragment shader invocations produced per-pixel is determined as follows: * If per-sample shading is enabled, the fragment shader is invoked once per covered sample. * Otherwise, the fragment shader is invoked at least once per fragment but no more than once per covered sample. In addition to the conditions outlined above for the invocation of a fragment shader, a fragment shader invocation may: be produced as a _helper invocation_. A helper invocation is a fragment shader invocation that is created solely for the purposes of evaluating derivatives for use in non-helper fragment shader invocations. Stores and atomics performed by helper invocations must: not have any effect on memory, and values returned by atomic instructions in helper invocations are undefined. [[shaders-fragment-earlytest]] === Early Fragment Tests An explicit control is provided to allow fragment shaders to enable early fragment tests. If the fragment shader specifies the code:EarlyFragmentTests code:OpExecutionMode, the per-fragment tests described in <> are performed prior to fragment shader execution. Otherwise, they are performed after fragment shader execution. ifdef::VK_EXT_post_depth_coverage[] [[shaders-fragment-earlytest-postdepthcoverage]] If the fragment shader additionally specifies the code:PostDepthCoverage code:OpExecutionMode, the value of a variable decorated with the <> built-in reflects the coverage after the early fragment tests. Otherwise, it reflects the coverage before the early fragment tests. endif::VK_EXT_post_depth_coverage[] [[shaders-compute]] == Compute Shaders Compute shaders are invoked via flink:vkCmdDispatch and flink:vkCmdDispatchIndirect commands. In general, they have access to similar resources as shader stages executing as part of a graphics pipeline. Compute workloads are formed from groups of work items called workgroups and processed by the compute shader in the current compute pipeline. A workgroup is a collection of shader invocations that execute the same shader, potentially in parallel. Compute shaders execute in _global workgroups_ which are divided into a number of _local workgroups_ with a size that can: be set by assigning a value to the code:LocalSize execution mode or via an object decorated by the code:WorkgroupSize decoration. An invocation within a local workgroup can: share data with other members of the local workgroup through shared variables and issue memory and control flow barriers to synchronize with other members of the local workgroup. [[shaders-interpolation-decorations]] == Interpolation Decorations Interpolation decorations control the behavior of attribute interpolation in the fragment shader stage. Interpolation decorations can: be applied to code:Input storage class variables in the fragment shader stage's interface, and control the interpolation behavior of those variables. Inputs that could be interpolated can: be decorated by at most one of the following decorations: * code:Flat: no interpolation * code:NoPerspective: linear interpolation (for <> and <>). Fragment input variables decorated with neither code:Flat nor code:NoPerspective use perspective-correct interpolation (for <> and <>). The presence of and type of interpolation is controlled by the above interpolation decorations as well as the auxiliary decorations code:Centroid and code:Sample. A variable decorated with code:Flat will not be interpolated. Instead, it will have the same value for every fragment within a triangle. This value will come from a single <>. A variable decorated with code:Flat can: also be decorated with code:Centroid or code:Sample, which will mean the same thing as decorating it only as code:Flat. For fragment shader input variables decorated with neither code:Centroid nor code:Sample, the assigned variable may: be interpolated anywhere within the pixel and a single value may: be assigned to each sample within the pixel. code:Centroid and code:Sample can: be used to control the location and frequency of the sampling of the decorated fragment shader input. If a fragment shader input is decorated with code:Centroid, a single value may: be assigned to that variable for all samples in the pixel, but that value must: be interpolated to a location that lies in both the pixel and in the primitive being rendered, including any of the pixel's samples covered by the primitive. Because the location at which the variable is interpolated may: be different in neighboring pixels, and derivatives may: be computed by computing differences between neighboring pixels, derivatives of centroid-sampled inputs may: be less accurate than those for non-centroid interpolated variables. ifdef::VK_EXT_post_depth_coverage[] The <> execution mode does not affect the determination of the centroid location. endif::VK_EXT_post_depth_coverage[] If a fragment shader input is decorated with code:Sample, a separate value must: be assigned to that variable for each covered sample in the pixel, and that value must: be sampled at the location of the individual sample. When pname:rasterizationSamples is ename:VK_SAMPLE_COUNT_1_BIT, the pixel center must: be used for code:Centroid, code:Sample, and undecorated attribute interpolation. Fragment shader inputs that are signed or unsigned integers, integer vectors, or any double-precision floating-point type must: be decorated with code:Flat. ifdef::VK_AMD_shader_explicit_vertex_parameter[] When the <> device extension is enabled inputs can: be also decorated with the code:CustomInterpAMD interpolation decoration, including fragment shader inputs that are signed or unsigned integers, integer vectors, or any double-precision floating-point type. Inputs decorated with code:CustomInterpAMD can: only be accessed by the extended instruction code:InterpolateAtVertexAMD and allows accessing the value of the input for individual vertices of the primitive. endif::VK_AMD_shader_explicit_vertex_parameter[] [[shaders-staticuse]] == Static Use A SPIR-V module declares a global object in memory using the code:OpVariable instruction, which results in a pointer code:x to that object. A specific entry point in a SPIR-V module is said to _statically use_ that object if that entry point's call tree contains a function that contains a memory instruction or image instruction with code:x as an code:id operand. See the "`Memory Instructions`" and "`Image Instructions`" subsections of section 3 "`Binary Form`" of the SPIR-V specification for the complete list of SPIR-V memory instructions. Static use is not used to control the behavior of variables with code:Input and code:Output storage. The effects of those variables are applied based only on whether they are present in a shader entry point's interface. [[shaders-invocationgroups]] == Invocation and Derivative Groups An _invocation group_ (see the subsection "`Control Flow`" of section 2 of the SPIR-V specification) for a compute shader is the set of invocations in a single local workgroup. For graphics shaders, an invocation group is an implementation-dependent subset of the set of shader invocations of a given shader stage which are produced by a single drawing command. For indirect drawing commands with pname:drawCount greater than one, invocations from separate draws are in distinct invocation groups. [NOTE] .Note ==== Because the partitioning of invocations into invocation groups is implementation-dependent and not observable, applications generally need to assume the worst case of all invocations in a draw belonging to a single invocation group. ==== A _derivative group_ (see the subsection "`Control Flow`" of section 2 of the SPIR-V 1.00 Revision 4 specification) for a fragment shader is the set of invocations generated by a single primitive (point, line, or triangle), including any helper invocations generated by that primitive. Derivatives are undefined for a sampled image instruction if the instruction is in flow control that is not uniform across the derivative group. ifdef::VK_EXT_validation_cache[] [[shaders-validation-cache]] == Validation Cache [open,refpage='VkValidationCacheEXT',desc='Opaque handle to a validation cache object',type='handles'] -- Validation cache objects allow the result of internal validation to be reused, both within a single application run and between multiple runs. Reuse within a single run is achieved by passing the same validation cache object when creating supported Vulkan objects. Reuse across runs of an application is achieved by retrieving validation cache contents in one run of an application, saving the contents, and using them to preinitialize a validation cache on a subsequent run. The contents of the validation cache objects are managed by the validation layers. Applications can: manage the host memory consumed by a validation cache object and control the amount of data retrieved from a validation cache object. Validation cache objects are represented by sname:VkValidationCacheEXT handles: include::../api/handles/VkValidationCacheEXT.txt[] -- [open,refpage='vkCreateValidationCacheEXT',desc='Creates a new validation cache',type='protos'] -- To create validation cache objects, call: include::../api/protos/vkCreateValidationCacheEXT.txt[] * pname:device is the logical device that creates the validation cache object. * pname:pCreateInfo is a pointer to a sname:VkValidationCacheCreateInfoEXT structure that contains the initial parameters for the validation cache object. * pname:pAllocator controls host memory allocation as described in the <> chapter. * pname:pValidationCache is a pointer to a sname:VkValidationCacheEXT handle in which the resulting validation cache object is returned. [NOTE] .Note ==== Applications can: track and manage the total host memory size of a validation cache object using the pname:pAllocator. Applications can: limit the amount of data retrieved from a validation cache object in fname:vkGetValidationCacheDataEXT. Implementations should: not internally limit the total number of entries added to a validation cache object or the total host memory consumed. ==== Once created, a validation cache can: be passed to the fname:vkCreateShaderModule command as part of the sname:VkShaderModuleCreateInfo pname:pNext chain. If a sname:VkShaderModuleValidationCacheCreateInfoEXT object is part of the sname:VkShaderModuleCreateInfo::pname:pNext chain, and its pname:validationCache field is not dlink:VK_NULL_HANDLE, the implementation will query it for possible reuse opportunities and update it with new content. The use of the validation cache object in these commands is internally synchronized, and the same validation cache object can: be used in multiple threads simultaneously. [NOTE] .Note ==== Implementations should: make every effort to limit any critical sections to the actual accesses to the cache, which is expected to be significantly shorter than the duration of the fname:vkCreateShaderModule command. ==== include::../validity/protos/vkCreateValidationCacheEXT.txt[] -- [open,refpage='VkValidationCacheCreateInfoEXT',desc='Structure specifying parameters of a newly created validation cache',type='structs'] -- The sname:VkValidationCacheCreateInfoEXT structure is defined as: include::../api/structs/VkValidationCacheCreateInfoEXT.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is reserved for future use. * pname:initialDataSize is the number of bytes in pname:pInitialData. If pname:initialDataSize is zero, the validation cache will initially be empty. * pname:pInitialData is a pointer to previously retrieved validation cache data. If the validation cache data is incompatible (as defined below) with the device, the validation cache will be initially empty. If pname:initialDataSize is zero, pname:pInitialData is ignored. .Valid Usage **** * [[VUID-VkValidationCacheCreateInfoEXT-initialDataSize-01534]] If pname:initialDataSize is not `0`, it must: be equal to the size of pname:pInitialData, as returned by fname:vkGetValidationCacheDataEXT when pname:pInitialData was originally retrieved * [[VUID-VkValidationCacheCreateInfoEXT-initialDataSize-01535]] If pname:initialDataSize is not `0`, pname:pInitialData must: have been retrieved from a previous call to fname:vkGetValidationCacheDataEXT **** include::../validity/structs/VkValidationCacheCreateInfoEXT.txt[] -- [open,refpage='vkMergeValidationCachesEXT',desc='Combine the data stores of validation caches',type='protos'] -- Validation cache objects can: be merged using the command: include::../api/protos/vkMergeValidationCachesEXT.txt[] * pname:device is the logical device that owns the validation cache objects. * pname:dstCache is the handle of the validation cache to merge results into. * pname:srcCacheCount is the length of the pname:pSrcCaches array. * pname:pSrcCaches is an array of validation cache handles, which will be merged into pname:dstCache. The previous contents of pname:dstCache are included after the merge. [NOTE] .Note ==== The details of the merge operation are implementation dependent, but implementations should: merge the contents of the specified validation caches and prune duplicate entries. ==== .Valid Usage **** * [[VUID-vkMergeValidationCachesEXT-dstCache-01536]] pname:dstCache must: not appear in the list of source caches **** include::../validity/protos/vkMergeValidationCachesEXT.txt[] -- [open,refpage='vkGetValidationCacheDataEXT',desc='Get the data store from a validation cache',type='protos'] -- Data can: be retrieved from a validation cache object using the command: include::../api/protos/vkGetValidationCacheDataEXT.txt[] * pname:device is the logical device that owns the validation cache. * pname:validationCache is the validation cache to retrieve data from. * pname:pDataSize is a pointer to a value related to the amount of data in the validation cache, as described below. * pname:pData is either `NULL` or a pointer to a buffer. If pname:pData is `NULL`, then the maximum size of the data that can: be retrieved from the validation cache, in bytes, is returned in pname:pDataSize. Otherwise, pname:pDataSize must: point to a variable set by the user to the size of the buffer, in bytes, pointed to by pname:pData, and on return the variable is overwritten with the amount of data actually written to pname:pData. If pname:pDataSize is less than the maximum size that can: be retrieved by the validation cache, at most pname:pDataSize bytes will be written to pname:pData, and fname:vkGetValidationCacheDataEXT will return ename:VK_INCOMPLETE. Any data written to pname:pData is valid and can: be provided as the pname:pInitialData member of the sname:VkValidationCacheCreateInfoEXT structure passed to fname:vkCreateValidationCacheEXT. Two calls to fname:vkGetValidationCacheDataEXT with the same parameters must: retrieve the same data unless a command that modifies the contents of the cache is called between them. [[validation-cache-header]] Applications can: store the data retrieved from the validation cache, and use these data, possibly in a future run of the application, to populate new validation cache objects. The results of validation, however, may: depend on the vendor ID, device ID, driver version, and other details of the device. To enable applications to detect when previously retrieved data is incompatible with the device, the initial bytes written to pname:pData must: be a header consisting of the following members: .Layout for validation cache header version ename:VK_VALIDATION_CACHE_HEADER_VERSION_ONE_EXT [width="85%",cols="8%,21%,71%",options="header"] |==== | Offset | Size | Meaning | 0 | 4 | length in bytes of the entire validation cache header written as a stream of bytes, with the least significant byte first | 4 | 4 | a elink:VkValidationCacheHeaderVersionEXT value written as a stream of bytes, with the least significant byte first | 8 | ename:VK_UUID_SIZE | a layer commit ID expressed as a UUID, which uniquely identifies the version of the validation layers used to generate these validation results |==== The first four bytes encode the length of the entire validation cache header, in bytes. This value includes all fields in the header including the validation cache version field and the size of the length field. The next four bytes encode the validation cache version, as described for elink:VkValidationCacheHeaderVersionEXT. A consumer of the validation cache should: use the cache version to interpret the remainder of the cache header. If pname:pDataSize is less than what is necessary to store this header, nothing will be written to pname:pData and zero will be written to pname:pDataSize. include::../validity/protos/vkGetValidationCacheDataEXT.txt[] -- [open,refpage='VkValidationCacheHeaderVersionEXT',desc='Encode validation cache version',type='enums',xrefs='vkCreateValdiationCacheEXT vkGetValidationCacheDataEXT'] -- Possible values of the second group of four bytes in the header returned by flink:vkGetValidationCacheDataEXT, encoding the validation cache version, are: include::../api/enums/VkValidationCacheHeaderVersionEXT.txt[] * ename:VK_VALIDATION_CACHE_HEADER_VERSION_ONE_EXT specifies version one of the validation cache. -- [open,refpage='vkDestroyValidationCacheEXT',desc='Destroy a validation cache object',type='protos'] -- To destroy a validation cache, call: include::../api/protos/vkDestroyValidationCacheEXT.txt[] * pname:device is the logical device that destroys the validation cache object. * pname:validationCache is the handle of the validation cache to destroy. * pname:pAllocator controls host memory allocation as described in the <> chapter. .Valid Usage **** * [[VUID-vkDestroyValidationCacheEXT-validationCache-01537]] If sname:VkAllocationCallbacks were provided when pname:validationCache was created, a compatible set of callbacks must: be provided here * [[VUID-vkDestroyValidationCacheEXT-validationCache-01538]] If no sname:VkAllocationCallbacks were provided when pname:validationCache was created, pname:pAllocator must: be `NULL` **** include::../validity/protos/vkDestroyValidationCacheEXT.txt[] -- endif::VK_EXT_validation_cache[]