// Copyright (c) 2015-2017 Khronos Group. This work is licensed under a // Creative Commons Attribution 4.0 International License; see // http://creativecommons.org/licenses/by/4.0/ [[features]] = Features, Limits, and Formats Vulkan is designed to support a wide range of hardware and as such there are a number of features, limits, and formats which are not supported on all hardware. Features describe functionality that is not required: and which must: be explicitly enabled. Limits describe implementation-dependent minimums, maximums, and other device characteristics that an application may: need to be aware of. Supported buffer and image formats may: vary across implementations. A minimum set of format features are guaranteed, but others must: be explicitly queried before use to ensure they are supported by the implementation. [NOTE] .Note on extensibility ==== The features and limits are reported via basic structures (that is slink:VkPhysicalDeviceFeatures and slink:VkPhysicalDeviceLimits), as well as extensible structures (sname:VkPhysicalDeviceFeatures2KHR and sname:VkPhysicalDeviceProperties2KHR) which were added in code:VK_KHR_get_physical_device_properties2. When new features or limits are added in future Vulkan version or extensions, each extension should: introduce one new feature structure and/or limit structure (as needed). These structures can: be added to the pname:pNext chain of the sname:VkPhysicalDeviceFeatures2KHR and sname:VkPhysicalDeviceProperties2KHR structures, respectively. ==== [[features-features]] == Features The Specification defines a set of fine-grained features that are not required:, but may: be supported by a Vulkan implementation. Support for features is reported and enabled on a per-feature basis. Features are properties of the physical device. [open,refpage='vkGetPhysicalDeviceFeatures',desc='Reports capabilities of a physical device',type='protos'] -- To query supported features, call: include::../api/protos/vkGetPhysicalDeviceFeatures.txt[] * pname:physicalDevice is the physical device from which to query the supported features. * pname:pFeatures is a pointer to a slink:VkPhysicalDeviceFeatures structure in which the physical device features are returned. For each feature, a value of ename:VK_TRUE indicates that the feature is supported on this physical device, and ename:VK_FALSE indicates that the feature is not supported. include::../validity/protos/vkGetPhysicalDeviceFeatures.txt[] -- Fine-grained features used by a logical device must: be enabled at sname:VkDevice creation time. If a feature is enabled that the physical device does not support, sname:VkDevice creation will fail. If an application uses a feature without enabling it at sname:VkDevice creation time, the device behavior is undefined. The validation layer will warn if features are used without being enabled. The fine-grained features are enabled by passing a pointer to the sname:VkPhysicalDeviceFeatures structure via the pname:pEnabledFeatures member of the sname:VkDeviceCreateInfo structure that is passed into the fname:vkCreateDevice call. If a member of pname:pEnabledFeatures is set to ename:VK_TRUE or ename:VK_FALSE, then the device will be created with the indicated feature enabled or disabled, respectively. ifdef::VK_KHR_get_physical_device_properties2[] Features can: also be enabled by using the slink:VkPhysicalDeviceFeatures2KHR structure. endif::VK_KHR_get_physical_device_properties2[] If an application wishes to enable all features supported by a device, it can: simply pass in the sname:VkPhysicalDeviceFeatures structure that was previously returned by fname:vkGetPhysicalDeviceFeatures. To disable an individual feature, the application can: set the desired member to ename:VK_FALSE in the same structure. Setting pname:pEnabledFeatures to `NULL` ifdef::VK_KHR_get_physical_device_properties2[] and not including a slink:VkPhysicalDeviceFeatures2KHR in the pname:pNext member of slink:VkDeviceCreateInfo endif::VK_KHR_get_physical_device_properties2[] is equivalent to setting all members of the structure to ename:VK_FALSE. [NOTE] .Note ==== Some features, such as pname:robustBufferAccess, may: incur a run-time performance cost. Application writers should: carefully consider the implications of enabling all supported features. ==== ifdef::VK_KHR_get_physical_device_properties2[] [open,refpage='vkGetPhysicalDeviceFeatures2KHR',desc='Reports capabilities of a physical device',type='protos'] -- To query supported features defined by the core or extensions, call: include::../api/protos/vkGetPhysicalDeviceFeatures2KHR.txt[] * pname:physicalDevice is the physical device from which to query the supported features. * pname:pFeatures is a pointer to a slink:VkPhysicalDeviceFeatures2KHR structure in which the physical device features are returned. Each structure in pname:pFeatures and its pname:pNext chain contain members corresponding to fine-grained features. fname:vkGetPhysicalDeviceFeatures2KHR writes each member to a boolean value indicating whether that feature is supported. include::../validity/protos/vkGetPhysicalDeviceFeatures2KHR.txt[] -- [open,refpage='VkPhysicalDeviceFeatures2KHR',desc='Structure describing the fine-grained features that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceFeatures2KHR structure is defined as: include::../api/structs/VkPhysicalDeviceFeatures2KHR.txt[] The sname:VkPhysicalDeviceFeatures2KHR structure is defined as: * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:features is a structure of type slink:VkPhysicalDeviceFeatures describing the fine-grained features of the Vulkan 1.0 API. The pname:pNext chain of this structure is used to extend the structure with features defined by extensions. This structure can: be used in flink:vkGetPhysicalDeviceFeatures2KHR or can: be in the pname:pNext chain of a slink:VkDeviceCreateInfo structure, in which case it controls which features are enabled in the device in lieu of pname:pEnabledFeatures. include::../validity/structs/VkPhysicalDeviceFeatures2KHR.txt[] -- endif::VK_KHR_get_physical_device_properties2[] [open,refpage='VkPhysicalDeviceFeatures',desc='Structure describing the fine-grained features that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceFeatures structure is defined as: include::../api/structs/VkPhysicalDeviceFeatures.txt[] The members of the sname:VkPhysicalDeviceFeatures structure describe the following features: * [[features-features-robustBufferAccess]] pname:robustBufferAccess indicates that accesses to buffers are bounds-checked against the range of the buffer descriptor (as determined by sname:VkDescriptorBufferInfo::pname:range, sname:VkBufferViewCreateInfo::pname:range, or the size of the buffer). Out of bounds accesses must: not cause application termination, and the effects of shader loads, stores, and atomics must: conform to an implementation-dependent behavior as described below. ** A buffer access is considered to be out of bounds if any of the following are true: *** The pointer was formed by code:OpImageTexelPointer and the coordinate is less than zero or greater than or equal to the number of whole elements in the bound range. *** The pointer was not formed by code:OpImageTexelPointer and the object pointed to is not wholly contained within the bound range. ifdef::VK_KHR_variable_pointers[] This includes accesses performed via _variable pointers_ where the buffer descriptor being accessed cannot be statically determined. Uninitialized pointers and pointers equal to code:OpConstantNull are treated as pointing to a zero-sized object, so all accesses through such pointers are considered to be out of bounds. endif::VK_KHR_variable_pointers[] + [NOTE] .Note ==== If a SPIR-V code:OpLoad instruction loads a structure and the tail end of the structure is out of bounds, then all members of the structure are considered out of bounds even if the members at the end are not statically used. ==== *** If any buffer access in a given SPIR-V block is determined to be out of bounds, then any other access of the same type (load, store, or atomic) in the same SPIR-V block that accesses an address less than 16 bytes away from the out of bounds address may: also be considered out of bounds. ** Out-of-bounds buffer loads will return any of the following values: *** Values from anywhere within the memory range(s) bound to the buffer (possibly including bytes of memory past the end of the buffer, up to the end of the bound range). *** Zero values, or [eq]#(0,0,0,x)# vectors for vector reads where x is a valid value represented in the type of the vector components and may: be any of: **** 0, 1, or the maximum representable positive integer value, for signed or unsigned integer components **** 0.0 or 1.0, for floating-point components ** Out-of-bounds writes may: modify values within the memory range(s) bound to the buffer, but must: not modify any other memory. ** Out-of-bounds atomics may: modify values within the memory range(s) bound to the buffer, but must: not modify any other memory, and return an undefined value. ** Vertex input attributes are considered out of bounds if the address of the attribute plus the size of the attribute is greater than the size of the bound buffer. Further, if any vertex input attribute using a specific vertex input binding is out of bounds, then all vertex input attributes using that vertex input binding for that vertex shader invocation are considered out of bounds. *** If a vertex input attribute is out of bounds, it will be assigned one of the following values: **** Values from anywhere within the memory range(s) bound to the buffer, converted according to the format of the attribute. **** Zero values, format converted according to the format of the attribute. **** Zero values, or [eq]#(0,0,0,x)# vectors, as described above. ** If pname:robustBufferAccess is not enabled, out of bounds accesses may: corrupt any memory within the process and cause undefined behavior up to and including application termination. * [[features-features-fullDrawIndexUint32]] pname:fullDrawIndexUint32 indicates the full 32-bit range of indices is supported for indexed draw calls when using a elink:VkIndexType of ename:VK_INDEX_TYPE_UINT32. pname:maxDrawIndexedIndexValue is the maximum index value that may: be used (aside from the primitive restart index, which is always 2^32^-1 when the elink:VkIndexType is ename:VK_INDEX_TYPE_UINT32). If this feature is supported, pname:maxDrawIndexedIndexValue must: be 2^32^-1; otherwise it must: be no smaller than 2^24^-1. See <>. * [[features-features-imageCubeArray]] pname:imageCubeArray indicates whether image views with a elink:VkImageViewType of ename:VK_IMAGE_VIEW_TYPE_CUBE_ARRAY can: be created, and that the corresponding code:SampledCubeArray and code:ImageCubeArray SPIR-V capabilities can: be used in shader code. * [[features-features-independentBlend]] pname:independentBlend indicates whether the sname:VkPipelineColorBlendAttachmentState settings are controlled independently per-attachment. If this feature is not enabled, the sname:VkPipelineColorBlendAttachmentState settings for all color attachments must: be identical. Otherwise, a different sname:VkPipelineColorBlendAttachmentState can: be provided for each bound color attachment. * [[features-features-geometryShader]] pname:geometryShader indicates whether geometry shaders are supported. If this feature is not enabled, the ename:VK_SHADER_STAGE_GEOMETRY_BIT and ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT enum values must: not be used. This also indicates whether shader modules can: declare the code:Geometry capability. * [[features-features-tessellationShader]] pname:tessellationShader indicates whether tessellation control and evaluation shaders are supported. If this feature is not enabled, the ename:VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, ename:VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT, ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT, ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT, and ename:VK_STRUCTURE_TYPE_PIPELINE_TESSELLATION_STATE_CREATE_INFO enum values must: not be used. This also indicates whether shader modules can: declare the code:Tessellation capability. * [[features-features-sampleRateShading]] pname:sampleRateShading indicates whether per-sample shading and multisample interpolation are supported. If this feature is not enabled, the pname:sampleShadingEnable member of the sname:VkPipelineMultisampleStateCreateInfo structure must: be set to ename:VK_FALSE and the pname:minSampleShading member is ignored. This also indicates whether shader modules can: declare the code:SampleRateShading capability. * [[features-features-dualSrcBlend]] pname:dualSrcBlend indicates whether blend operations which take two sources are supported. If this feature is not enabled, the ename:VK_BLEND_FACTOR_SRC1_COLOR, ename:VK_BLEND_FACTOR_ONE_MINUS_SRC1_COLOR, ename:VK_BLEND_FACTOR_SRC1_ALPHA, and ename:VK_BLEND_FACTOR_ONE_MINUS_SRC1_ALPHA enum values must: not be used as source or destination blending factors. See <>. * [[features-features-logicOp]] pname:logicOp indicates whether logic operations are supported. If this feature is not enabled, the pname:logicOpEnable member of the sname:VkPipelineColorBlendStateCreateInfo structure must: be set to ename:VK_FALSE, and the pname:logicOp member is ignored. * [[features-features-multiDrawIndirect]] pname:multiDrawIndirect indicates whether multiple draw indirect is supported. If this feature is not enabled, the pname:drawCount parameter to the fname:vkCmdDrawIndirect and fname:vkCmdDrawIndexedIndirect commands must: be 0 or 1. The pname:maxDrawIndirectCount member of the sname:VkPhysicalDeviceLimits structure must: also be 1 if this feature is not supported. See <>. * [[features-features-drawIndirectFirstInstance]] pname:drawIndirectFirstInstance indicates whether indirect draw calls support the pname:firstInstance parameter. If this feature is not enabled, the pname:firstInstance member of all sname:VkDrawIndirectCommand and sname:VkDrawIndexedIndirectCommand structures that are provided to the fname:vkCmdDrawIndirect and fname:vkCmdDrawIndexedIndirect commands must: be 0. * [[features-features-depthClamp]] pname:depthClamp indicates whether depth clamping is supported. If this feature is not enabled, the pname:depthClampEnable member of the sname:VkPipelineRasterizationStateCreateInfo structure must: be set to ename:VK_FALSE. Otherwise, setting pname:depthClampEnable to ename:VK_TRUE will enable depth clamping. * [[features-features-depthBiasClamp]] pname:depthBiasClamp indicates whether depth bias clamping is supported. If this feature is not enabled, the pname:depthBiasClamp member of the sname:VkPipelineRasterizationStateCreateInfo structure must: be set to 0.0 unless the ename:VK_DYNAMIC_STATE_DEPTH_BIAS dynamic state is enabled, and the pname:depthBiasClamp parameter to fname:vkCmdSetDepthBias must: be set to 0.0. * [[features-features-fillModeNonSolid]] pname:fillModeNonSolid indicates whether point and wireframe fill modes are supported. If this feature is not enabled, the ename:VK_POLYGON_MODE_POINT and ename:VK_POLYGON_MODE_LINE enum values must: not be used. * [[features-features-depthBounds]] pname:depthBounds indicates whether depth bounds tests are supported. If this feature is not enabled, the pname:depthBoundsTestEnable member of the sname:VkPipelineDepthStencilStateCreateInfo structure must: be set to ename:VK_FALSE. When pname:depthBoundsTestEnable is set to ename:VK_FALSE, the pname:minDepthBounds and pname:maxDepthBounds members of the sname:VkPipelineDepthStencilStateCreateInfo structure are ignored. * [[features-features-wideLines]] pname:wideLines indicates whether lines with width other than 1.0 are supported. If this feature is not enabled, the pname:lineWidth member of the sname:VkPipelineRasterizationStateCreateInfo structure must: be set to 1.0 unless the ename:VK_DYNAMIC_STATE_LINE_WIDTH dynamic state is enabled, and the pname:lineWidth parameter to fname:vkCmdSetLineWidth must: be set to 1.0. When this feature is supported, the range and granularity of supported line widths are indicated by the pname:lineWidthRange and pname:lineWidthGranularity members of the sname:VkPhysicalDeviceLimits structure, respectively. * [[features-features-largePoints]] pname:largePoints indicates whether points with size greater than 1.0 are supported. If this feature is not enabled, only a point size of 1.0 written by a shader is supported. The range and granularity of supported point sizes are indicated by the pname:pointSizeRange and pname:pointSizeGranularity members of the sname:VkPhysicalDeviceLimits structure, respectively. * [[features-features-alphaToOne]] pname:alphaToOne indicates whether the implementation is able to replace the alpha value of the color fragment output from the fragment shader with the maximum representable alpha value for fixed-point colors or 1.0 for floating-point colors. If this feature is not enabled, then the pname:alphaToOneEnable member of the sname:VkPipelineMultisampleStateCreateInfo structure must: be set to ename:VK_FALSE. Otherwise setting pname:alphaToOneEnable to ename:VK_TRUE will enable alpha-to-one behavior. * [[features-features-multiViewport]] pname:multiViewport indicates whether more than one viewport is supported. If this feature is not enabled, the pname:viewportCount and pname:scissorCount members of the sname:VkPipelineViewportStateCreateInfo structure must: be set to 1. Similarly, the pname:viewportCount parameter to the fname:vkCmdSetViewport command and the pname:scissorCount parameter to the fname:vkCmdSetScissor command must: be 1, and the pname:firstViewport parameter to the fname:vkCmdSetViewport command and the pname:firstScissor parameter to the fname:vkCmdSetScissor command must: be 0. * [[features-features-samplerAnisotropy]] pname:samplerAnisotropy indicates whether anisotropic filtering is supported. If this feature is not enabled, the pname:maxAnisotropy member of the sname:VkSamplerCreateInfo structure must: be 1.0. * [[features-features-textureCompressionETC2]] pname:textureCompressionETC2 indicates whether all of the ETC2 and EAC compressed texture formats are supported. If this feature is enabled, then the ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT, ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT and ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT features must: be supported in pname:optimalTilingFeatures for the following formats: + ** ename:VK_FORMAT_ETC2_R8G8B8_UNORM_BLOCK ** ename:VK_FORMAT_ETC2_R8G8B8_SRGB_BLOCK ** ename:VK_FORMAT_ETC2_R8G8B8A1_UNORM_BLOCK ** ename:VK_FORMAT_ETC2_R8G8B8A1_SRGB_BLOCK ** ename:VK_FORMAT_ETC2_R8G8B8A8_UNORM_BLOCK ** ename:VK_FORMAT_ETC2_R8G8B8A8_SRGB_BLOCK ** ename:VK_FORMAT_EAC_R11_UNORM_BLOCK ** ename:VK_FORMAT_EAC_R11_SNORM_BLOCK ** ename:VK_FORMAT_EAC_R11G11_UNORM_BLOCK ** ename:VK_FORMAT_EAC_R11G11_SNORM_BLOCK + flink:vkGetPhysicalDeviceFormatProperties and flink:vkGetPhysicalDeviceImageFormatProperties can: be used to check for additional supported properties of individual formats. * [[features-features-textureCompressionASTC_LDR]] pname:textureCompressionASTC_LDR indicates whether all of the ASTC LDR compressed texture formats are supported. If this feature is enabled, then the ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT, ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT and ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT features must: be supported in pname:optimalTilingFeatures for the following formats: + ** ename:VK_FORMAT_ASTC_4x4_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_4x4_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_5x4_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_5x4_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_5x5_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_5x5_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_6x5_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_6x5_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_6x6_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_6x6_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_8x5_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_8x5_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_8x6_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_8x6_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_8x8_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_8x8_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_10x5_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_10x5_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_10x6_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_10x6_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_10x8_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_10x8_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_10x10_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_10x10_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_12x10_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_12x10_SRGB_BLOCK ** ename:VK_FORMAT_ASTC_12x12_UNORM_BLOCK ** ename:VK_FORMAT_ASTC_12x12_SRGB_BLOCK + flink:vkGetPhysicalDeviceFormatProperties and flink:vkGetPhysicalDeviceImageFormatProperties can: be used to check for additional supported properties of individual formats. * [[features-features-textureCompressionBC]] pname:textureCompressionBC indicates whether all of the BC compressed texture formats are supported. If this feature is enabled, then the ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT, ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT and ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT features must: be supported in pname:optimalTilingFeatures for the following formats: + ** ename:VK_FORMAT_BC1_RGB_UNORM_BLOCK ** ename:VK_FORMAT_BC1_RGB_SRGB_BLOCK ** ename:VK_FORMAT_BC1_RGBA_UNORM_BLOCK ** ename:VK_FORMAT_BC1_RGBA_SRGB_BLOCK ** ename:VK_FORMAT_BC2_UNORM_BLOCK ** ename:VK_FORMAT_BC2_SRGB_BLOCK ** ename:VK_FORMAT_BC3_UNORM_BLOCK ** ename:VK_FORMAT_BC3_SRGB_BLOCK ** ename:VK_FORMAT_BC4_UNORM_BLOCK ** ename:VK_FORMAT_BC4_SNORM_BLOCK ** ename:VK_FORMAT_BC5_UNORM_BLOCK ** ename:VK_FORMAT_BC5_SNORM_BLOCK ** ename:VK_FORMAT_BC6H_UFLOAT_BLOCK ** ename:VK_FORMAT_BC6H_SFLOAT_BLOCK ** ename:VK_FORMAT_BC7_UNORM_BLOCK ** ename:VK_FORMAT_BC7_SRGB_BLOCK + flink:vkGetPhysicalDeviceFormatProperties and flink:vkGetPhysicalDeviceImageFormatProperties can: be used to check for additional supported properties of individual formats. * [[features-features-occlusionQueryPrecise]] pname:occlusionQueryPrecise indicates whether occlusion queries returning actual sample counts are supported. Occlusion queries are created in a sname:VkQueryPool by specifying the pname:queryType of ename:VK_QUERY_TYPE_OCCLUSION in the sname:VkQueryPoolCreateInfo structure which is passed to fname:vkCreateQueryPool. If this feature is enabled, queries of this type can: enable ename:VK_QUERY_CONTROL_PRECISE_BIT in the pname:flags parameter to fname:vkCmdBeginQuery. If this feature is not supported, the implementation supports only boolean occlusion queries. When any samples are passed, boolean queries will return a non-zero result value, otherwise a result value of zero is returned. When this feature is enabled and ename:VK_QUERY_CONTROL_PRECISE_BIT is set, occlusion queries will report the actual number of samples passed. * [[features-features-pipelineStatisticsQuery]] pname:pipelineStatisticsQuery indicates whether the pipeline statistics queries are supported. If this feature is not enabled, queries of type ename:VK_QUERY_TYPE_PIPELINE_STATISTICS cannot: be created, and none of the elink:VkQueryPipelineStatisticFlagBits bits can: be set in the pname:pipelineStatistics member of the sname:VkQueryPoolCreateInfo structure. * [[features-features-vertexPipelineStoresAndAtomics]] pname:vertexPipelineStoresAndAtomics indicates whether storage buffers and images support stores and atomic operations in the vertex, tessellation, and geometry shader stages. If this feature is not enabled, all storage image, storage texel buffers, and storage buffer variables used by these stages in shader modules must: be decorated with the code:NonWriteable decoration (or the code:readonly memory qualifier in GLSL). * [[features-features-fragmentStoresAndAtomics]] pname:fragmentStoresAndAtomics indicates whether storage buffers and images support stores and atomic operations in the fragment shader stage. If this feature is not enabled, all storage image, storage texel buffers, and storage buffer variables used by the fragment stage in shader modules must: be decorated with the code:NonWriteable decoration (or the code:readonly memory qualifier in GLSL). * [[features-features-shaderTessellationAndGeometryPointSize]] pname:shaderTessellationAndGeometryPointSize indicates whether the code:PointSize built-in decoration is available in the tessellation control, tessellation evaluation, and geometry shader stages. If this feature is not enabled, members decorated with the code:PointSize built-in decoration must: not be read from or written to and all points written from a tessellation or geometry shader will have a size of 1.0. This also indicates whether shader modules can: declare the code:TessellationPointSize capability for tessellation control and evaluation shaders, or if the shader modules can: declare the code:GeometryPointSize capability for geometry shaders. An implementation supporting this feature must: also support one or both of the <> or <> features. * [[features-features-shaderImageGatherExtended]] pname:shaderImageGatherExtended indicates whether the extended set of image gather instructions are available in shader code. If this feature is not enabled, the code:OpImage*code:Gather instructions do not support the code:Offset and code:ConstOffsets operands. This also indicates whether shader modules can: declare the code:ImageGatherExtended capability. * [[features-features-shaderStorageImageExtendedFormats]] pname:shaderStorageImageExtendedFormats indicates whether the extended storage image formats are available in shader code. If this feature is not enabled, the formats requiring the code:StorageImageExtendedFormats capability are not supported for storage images. This also indicates whether shader modules can: declare the code:StorageImageExtendedFormats capability. * [[features-features-shaderStorageImageMultisample]] pname:shaderStorageImageMultisample indicates whether multisampled storage images are supported. If this feature is not enabled, images that are created with a pname:usage that includes ename:VK_IMAGE_USAGE_STORAGE_BIT must: be created with pname:samples equal to ename:VK_SAMPLE_COUNT_1_BIT. This also indicates whether shader modules can: declare the code:StorageImageMultisample capability. * [[features-features-shaderStorageImageReadWithoutFormat]] pname:shaderStorageImageReadWithoutFormat indicates whether storage images require a format qualifier to be specified when reading from storage images. If this feature is not enabled, the code:OpImageRead instruction must: not have an code:OpTypeImage of code:Unknown. This also indicates whether shader modules can: declare the code:StorageImageReadWithoutFormat capability. * [[features-features-shaderStorageImageWriteWithoutFormat]] pname:shaderStorageImageWriteWithoutFormat indicates whether storage images require a format qualifier to be specified when writing to storage images. If this feature is not enabled, the code:OpImageWrite instruction must: not have an code:OpTypeImage of code:Unknown. This also indicates whether shader modules can: declare the code:StorageImageWriteWithoutFormat capability. * [[features-features-shaderUniformBufferArrayDynamicIndexing]] pname:shaderUniformBufferArrayDynamicIndexing indicates whether arrays of uniform buffers can: be indexed by _dynamically uniform_ integer expressions in shader code. If this feature is not enabled, resources with a descriptor type of ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER or ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC must: be indexed only by constant integral expressions when aggregated into arrays in shader code. This also indicates whether shader modules can: declare the code:UniformBufferArrayDynamicIndexing capability. * [[features-features-shaderSampledImageArrayDynamicIndexing]] pname:shaderSampledImageArrayDynamicIndexing indicates whether arrays of samplers or sampled images can: be indexed by dynamically uniform integer expressions in shader code. If this feature is not enabled, resources with a descriptor type of ename:VK_DESCRIPTOR_TYPE_SAMPLER, ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER, or ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE must: be indexed only by constant integral expressions when aggregated into arrays in shader code. This also indicates whether shader modules can: declare the code:SampledImageArrayDynamicIndexing capability. * [[features-features-shaderStorageBufferArrayDynamicIndexing]] pname:shaderStorageBufferArrayDynamicIndexing indicates whether arrays of storage buffers can: be indexed by dynamically uniform integer expressions in shader code. If this feature is not enabled, resources with a descriptor type of ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER or ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC must: be indexed only by constant integral expressions when aggregated into arrays in shader code. This also indicates whether shader modules can: declare the code:StorageBufferArrayDynamicIndexing capability. * [[features-features-shaderStorageImageArrayDynamicIndexing]] pname:shaderStorageImageArrayDynamicIndexing indicates whether arrays of storage images can: be indexed by dynamically uniform integer expressions in shader code. If this feature is not enabled, resources with a descriptor type of ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE must: be indexed only by constant integral expressions when aggregated into arrays in shader code. This also indicates whether shader modules can: declare the code:StorageImageArrayDynamicIndexing capability. * [[features-features-shaderClipDistance]] pname:shaderClipDistance indicates whether clip distances are supported in shader code. If this feature is not enabled, any members decorated with the code:ClipDistance built-in decoration must: not be read from or written to in shader modules. This also indicates whether shader modules can: declare the code:ClipDistance capability. * [[features-features-shaderCullDistance]] pname:shaderCullDistance indicates whether cull distances are supported in shader code. If this feature is not enabled, any members decorated with the code:CullDistance built-in decoration must: not be read from or written to in shader modules. This also indicates whether shader modules can: declare the code:CullDistance capability. * [[features-features-shaderFloat64]] pname:shaderFloat64 indicates whether 64-bit floats (doubles) are supported in shader code. If this feature is not enabled, 64-bit floating-point types must: not be used in shader code. This also indicates whether shader modules can: declare the code:Float64 capability. * [[features-features-shaderInt64]] pname:shaderInt64 indicates whether 64-bit integers (signed and unsigned) are supported in shader code. If this feature is not enabled, 64-bit integer types must: not be used in shader code. This also indicates whether shader modules can: declare the code:Int64 capability. * [[features-features-shaderInt16]] pname:shaderInt16 indicates whether 16-bit integers (signed and unsigned) are supported in shader code. If this feature is not enabled, 16-bit integer types must: not be used in shader code. This also indicates whether shader modules can: declare the code:Int16 capability. * [[features-features-shaderResourceResidency]] pname:shaderResourceResidency indicates whether image operations that return resource residency information are supported in shader code. If this feature is not enabled, the code:OpImageSparse* instructions must: not be used in shader code. This also indicates whether shader modules can: declare the code:SparseResidency capability. The feature requires at least one of the ptext:sparseResidency* features to be supported. * [[features-features-shaderResourceMinLod]] pname:shaderResourceMinLod indicates whether image operations that specify the minimum resource level-of-detail (LOD) are supported in shader code. If this feature is not enabled, the code:MinLod image operand must: not be used in shader code. This also indicates whether shader modules can: declare the code:MinLod capability. * [[features-features-sparseBinding]] pname:sparseBinding indicates whether resource memory can: be managed at opaque sparse block level instead of at the object level. If this feature is not enabled, resource memory must: be bound only on a per-object basis using the fname:vkBindBufferMemory and fname:vkBindImageMemory commands. In this case, buffers and images must: not be created with ename:VK_BUFFER_CREATE_SPARSE_BINDING_BIT and ename:VK_IMAGE_CREATE_SPARSE_BINDING_BIT set in the pname:flags member of the sname:VkBufferCreateInfo and sname:VkImageCreateInfo structures, respectively. Otherwise resource memory can: be managed as described in <>. * [[features-features-sparseResidencyBuffer]] pname:sparseResidencyBuffer indicates whether the device can: access partially resident buffers. If this feature is not enabled, buffers must: not be created with ename:VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT set in the pname:flags member of the sname:VkBufferCreateInfo structure. * [[features-features-sparseResidencyImage2D]] pname:sparseResidencyImage2D indicates whether the device can: access partially resident 2D images with 1 sample per pixel. If this feature is not enabled, images with an pname:imageType of ename:VK_IMAGE_TYPE_2D and pname:samples set to ename:VK_SAMPLE_COUNT_1_BIT must: not be created with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT set in the pname:flags member of the sname:VkImageCreateInfo structure. * [[features-features-sparseResidencyImage3D]] pname:sparseResidencyImage3D indicates whether the device can: access partially resident 3D images. If this feature is not enabled, images with an pname:imageType of ename:VK_IMAGE_TYPE_3D must: not be created with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT set in the pname:flags member of the sname:VkImageCreateInfo structure. * [[features-features-sparseResidency2Samples]] pname:sparseResidency2Samples indicates whether the physical device can: access partially resident 2D images with 2 samples per pixel. If this feature is not enabled, images with an pname:imageType of ename:VK_IMAGE_TYPE_2D and pname:samples set to ename:VK_SAMPLE_COUNT_2_BIT must: not be created with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT set in the pname:flags member of the sname:VkImageCreateInfo structure. * [[features-features-sparseResidency4Samples]] pname:sparseResidency4Samples indicates whether the physical device can: access partially resident 2D images with 4 samples per pixel. If this feature is not enabled, images with an pname:imageType of ename:VK_IMAGE_TYPE_2D and pname:samples set to ename:VK_SAMPLE_COUNT_4_BIT must: not be created with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT set in the pname:flags member of the sname:VkImageCreateInfo structure. * [[features-features-sparseResidency8Samples]] pname:sparseResidency8Samples indicates whether the physical device can: access partially resident 2D images with 8 samples per pixel. If this feature is not enabled, images with an pname:imageType of ename:VK_IMAGE_TYPE_2D and pname:samples set to ename:VK_SAMPLE_COUNT_8_BIT must: not be created with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT set in the pname:flags member of the sname:VkImageCreateInfo structure. * [[features-features-sparseResidency16Samples]] pname:sparseResidency16Samples indicates whether the physical device can: access partially resident 2D images with 16 samples per pixel. If this feature is not enabled, images with an pname:imageType of ename:VK_IMAGE_TYPE_2D and pname:samples set to ename:VK_SAMPLE_COUNT_16_BIT must: not be created with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT set in the pname:flags member of the sname:VkImageCreateInfo structure. * [[features-features-sparseResidencyAliased]] pname:sparseResidencyAliased indicates whether the physical device can: correctly access data aliased into multiple locations. If this feature is not enabled, the ename:VK_BUFFER_CREATE_SPARSE_ALIASED_BIT and ename:VK_IMAGE_CREATE_SPARSE_ALIASED_BIT enum values must: not be used in pname:flags members of the sname:VkBufferCreateInfo and sname:VkImageCreateInfo structures, respectively. * [[features-features-variableMultisampleRate]] pname:variableMultisampleRate indicates whether all pipelines that will be bound to a command buffer during a subpass with no attachments must: have the same value for sname:VkPipelineMultisampleStateCreateInfo::pname:rasterizationSamples. If set to ename:VK_TRUE, the implementation supports variable multisample rates in a subpass with no attachments. If set to ename:VK_FALSE, then all pipelines bound in such a subpass must: have the same multisample rate. This has no effect in situations where a subpass uses any attachments. * [[features-features-inheritedQueries]] pname:inheritedQueries indicates whether a secondary command buffer may: be executed while a query is active. include::../validity/structs/VkPhysicalDeviceFeatures.txt[] -- ifdef::VK_KHR_variable_pointers[] [open,refpage='VkPhysicalDeviceVariablePointerFeaturesKHR',desc='Structure describing variable pointers features that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceVariablePointerFeaturesKHR structure is defined as: include::../api/structs/VkPhysicalDeviceVariablePointerFeaturesKHR.txt[] The members of the sname:VkPhysicalDeviceVariablePointerFeaturesKHR structure describe the following features: * [[features-features-variablePointersStorageBuffer]] pname:variablePointersStorageBuffer indicates whether the implementation supports the SPIR-V +VariablePointersStorageBuffer+ capability. When this feature is not enabled, shader modules must: not declare the +SPV_KHR_variable_pointers+ extension or the +VariablePointersStorageBuffer+ capability. * [[features-features-variablePointers]] pname:variablePointers indicates whether the implementation supports the SPIR-V +VariablePointers+ capability. When this feature is not enabled, shader modules must: not declare the +VariablePointers+ capability. If the sname:VkPhysicalDeviceVariablePointerFeaturesKHR structure is included in the pname:pNext chain of slink:VkPhysicalDeviceFeatures2KHR, it is filled with values indicating whether each feature is supported. sname:VkPhysicalDeviceVariablePointerFeaturesKHR can: also be used in the pname:pNext chain of slink:VkDeviceCreateInfo to enable the features. .Valid Usage **** * [[VUID-VkPhysicalDeviceVariablePointerFeaturesKHR-variablePointers-01431]] If pname:variablePointers is enabled then pname:variablePointersStorageBuffer must: also be enabled. **** include::../validity/structs/VkPhysicalDeviceVariablePointerFeaturesKHR.txt[] -- endif::VK_KHR_variable_pointers[] ifdef::VK_KHX_multiview[] [open,refpage='VkPhysicalDeviceMultiviewFeaturesKHX',desc='Structure describing multiview features that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceMultiviewFeaturesKHX structure is defined as: include::../api/structs/VkPhysicalDeviceMultiviewFeaturesKHX.txt[] The members of the sname:VkPhysicalDeviceMultiviewFeaturesKHX structure describe the following features: * [[features-features-multiview]] pname:multiview indicates whether the implementation supports multiview rendering within a render pass. If this feature is not enabled, the view mask of each subpass must: always be zero. * [[features-features-multiview-gs]] pname:multiviewGeometryShader indicates whether the implementation supports multiview rendering within a render pass, with <>. If this feature is not enabled, then a pipeline compiled against a subpass with a non-zero view mask must: not include a geometry shader. * [[features-features-multiview-tess]] pname:multiviewTessellationShader indicates whether the implementation supports multiview rendering within a render pass, with <>. If this feature is not enabled, then a pipeline compiled against a subpass with a non-zero view mask must: not include any tessellation shaders. If the sname:VkPhysicalDeviceMultiviewFeaturesKHX structure is included in the pname:pNext chain of slink:VkPhysicalDeviceFeatures2KHR, it is filled with values indicating whether each feature is supported. sname:VkPhysicalDeviceMultiviewFeaturesKHX can: also be used in the pname:pNext chain of slink:VkDeviceCreateInfo to enable the features. .Valid Usage **** * [[VUID-VkPhysicalDeviceMultiviewFeaturesKHX-multiviewGeometryShader-00580]] If pname:multiviewGeometryShader is enabled then pname:multiview must: also be enabled. * [[VUID-VkPhysicalDeviceMultiviewFeaturesKHX-multiviewTessellationShader-00581]] If pname:multiviewTessellationShader is enabled then pname:multiview must: also be enabled. **** include::../validity/structs/VkPhysicalDeviceMultiviewFeaturesKHX.txt[] -- endif::VK_KHX_multiview[] ifdef::VK_KHR_16bit_storage[] include::VK_KHR_16bit_storage/16bit_storage_feature_struct.txt[] endif::VK_KHR_16bit_storage[] ifdef::VK_KHR_sampler_ycbcr_conversion[] [open,refpage='VkPhysicalDeviceSamplerYcbcrConversionFeaturesKHR',desc='Structure describing Y\'CbCr conversion features that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceSamplerYcbcrConversionFeaturesKHR structure is defined as: include::../api/structs/VkPhysicalDeviceSamplerYcbcrConversionFeaturesKHR.txt[] The members of the sname:VkPhysicalDeviceSamplerYcbcrConversionFeaturesKHR structure describe the following feature: * [[features-features-sampler-YCbCr-conversion]] pname:samplerYcbcrConversion indicates whether the implementation supports <>. If pname:samplerYcbcrConversion is ename:VK_FALSE, sampler Y'C~B~C~R~ conversion is not supported, and samplers using sampler Y'C~B~C~R~ conversion must: not be used. include::../validity/structs/VkPhysicalDeviceSamplerYcbcrConversionFeaturesKHR.txt[] -- endif::VK_KHR_sampler_ycbcr_conversion[] ifdef::VK_EXT_blend_operation_advanced[] [open,refpage='VkPhysicalDeviceBlendOperationAdvancedFeaturesEXT',desc='Structure describing advanced blending features that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceBlendOperationAdvancedFeaturesEXT structure is defined as: include::../api/structs/VkPhysicalDeviceBlendOperationAdvancedFeaturesEXT.txt[] The members of the sname:VkPhysicalDeviceBlendOperationAdvancedFeaturesEXT structure describe the following features: * [[features-features-advancedBlendCoherentOperations]] pname:advancedBlendCoherentOperations indicates whether blending using <> is guaranteed to execute atomically and in <>. If this is ename:VK_TRUE, elink:VK_ACCESS_COLOR_ATTACHMENT_READ_NONCOHERENT_BIT_EXT is treated the same as VK_ACCESS_COLOR_ATTACHMENT_READ_BIT and advanced blending needs no additional synchronization over basic blending. If this is ename:VK_FALSE, then memory dependencies are required to guarantee order between two advanced blending operations that occur on the same sample. If the sname:VkPhysicalDeviceBlendOperationAdvancedFeaturesEXT structure is included in the pname:pNext chain of slink:VkPhysicalDeviceFeatures2KHR, it is filled with values indicating whether each feature is supported. sname:VkPhysicalDeviceBlendOperationAdvancedFeaturesEXT can: also be used in pname:pNext chain of slink:VkDeviceCreateInfo to enable the features. include::../validity/structs/VkPhysicalDeviceBlendOperationAdvancedFeaturesEXT.txt[] -- endif::VK_EXT_blend_operation_advanced[] [[features-features-requirements]] === Feature Requirements All Vulkan graphics implementations must: support the following features: * pname:robustBufferAccess. ifdef::VK_KHR_variable_pointers[] * pname:variablePointersStorageBuffer, if the <> extension is supported. endif::VK_KHR_variable_pointers[] All other features are not required: by the Specification. [[features-limits]] == Limits There are a variety of implementation-dependent limits. The sname:VkPhysicalDeviceLimits are properties of the physical device. These are available in the pname:limits member of the slink:VkPhysicalDeviceProperties structure which is returned from flink:vkGetPhysicalDeviceProperties. [open,refpage='VkPhysicalDeviceLimits',desc='Structure reporting implementation-dependent physical device limits',type='structs'] -- The sname:VkPhysicalDeviceLimits structure is defined as: include::../api/structs/VkPhysicalDeviceLimits.txt[] * [[features-limits-maxImageDimension1D]] pname:maxImageDimension1D is the maximum dimension (pname:width) supported for all images created with an pname:imageType of ename:VK_IMAGE_TYPE_1D. * [[features-limits-maxImageDimension2D]] pname:maxImageDimension2D is the maximum dimension (pname:width or pname:height) supported for all images created with an pname:imageType of ename:VK_IMAGE_TYPE_2D and without ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT set in pname:flags. * [[features-limits-maxImageDimension3D]] pname:maxImageDimension3D is the maximum dimension (pname:width, pname:height, or pname:depth) supported for all images created with an pname:imageType of ename:VK_IMAGE_TYPE_3D. * [[features-limits-maxImageDimensionCube]] pname:maxImageDimensionCube is the maximum dimension (pname:width or pname:height) supported for all images created with an pname:imageType of ename:VK_IMAGE_TYPE_2D and with ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT set in pname:flags. * [[features-limits-maxImageArrayLayers]] pname:maxImageArrayLayers is the maximum number of layers (pname:arrayLayers) for an image. * [[features-limits-maxTexelBufferElements]] pname:maxTexelBufferElements is the maximum number of addressable texels for a buffer view created on a buffer which was created with the ename:VK_BUFFER_USAGE_UNIFORM_TEXEL_BUFFER_BIT or ename:VK_BUFFER_USAGE_STORAGE_TEXEL_BUFFER_BIT set in the pname:usage member of the sname:VkBufferCreateInfo structure. * [[features-limits-maxUniformBufferRange]] pname:maxUniformBufferRange is the maximum value that can: be specified in the pname:range member of any slink:VkDescriptorBufferInfo structures passed to a call to flink:vkUpdateDescriptorSets for descriptors of type ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER or ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC. * [[features-limits-maxStorageBufferRange]] pname:maxStorageBufferRange is the maximum value that can: be specified in the pname:range member of any slink:VkDescriptorBufferInfo structures passed to a call to flink:vkUpdateDescriptorSets for descriptors of type ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER or ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC. * [[features-limits-maxPushConstantsSize]] pname:maxPushConstantsSize is the maximum size, in bytes, of the pool of push constant memory. For each of the push constant ranges indicated by the pname:pPushConstantRanges member of the sname:VkPipelineLayoutCreateInfo structure, [eq]#(pname:offset {plus} pname:size)# must: be less than or equal to this limit. * [[features-limits-maxMemoryAllocationCount]] pname:maxMemoryAllocationCount is the maximum number of device memory allocations, as created by flink:vkAllocateMemory, which can: simultaneously exist. * [[features-limits-maxSamplerAllocationCount]] pname:maxSamplerAllocationCount is the maximum number of sampler objects, as created by flink:vkCreateSampler, which can: simultaneously exist on a device. * [[features-limits-bufferImageGranularity]] pname:bufferImageGranularity is the granularity, in bytes, at which buffer or linear image resources, and optimal image resources can: be bound to adjacent offsets in the same sname:VkDeviceMemory object without aliasing. See <> for more details. * [[features-limits-sparseAddressSpaceSize]] pname:sparseAddressSpaceSize is the total amount of address space available, in bytes, for sparse memory resources. This is an upper bound on the sum of the size of all sparse resources, regardless of whether any memory is bound to them. * [[features-limits-maxBoundDescriptorSets]] pname:maxBoundDescriptorSets is the maximum number of descriptor sets that can: be simultaneously used by a pipeline. All code:DescriptorSet decorations in shader modules must: have a value less than pname:maxBoundDescriptorSets. See <>. * [[features-limits-maxPerStageDescriptorSamplers]] pname:maxPerStageDescriptorSamplers is the maximum number of samplers that can: be accessible to a single shader stage in a pipeline layout. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_SAMPLER or ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER count against this limit. A descriptor is accessible to a shader stage when the pname:stageFlags member of the sname:VkDescriptorSetLayoutBinding structure has the bit for that shader stage set. See <> and <>. * [[features-limits-maxPerStageDescriptorUniformBuffers]] pname:maxPerStageDescriptorUniformBuffers is the maximum number of uniform buffers that can: be accessible to a single shader stage in a pipeline layout. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER or ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC count against this limit. A descriptor is accessible to a shader stage when the pname:stageFlags member of the sname:VkDescriptorSetLayoutBinding structure has the bit for that shader stage set. See <> and <>. * [[features-limits-maxPerStageDescriptorStorageBuffers]] pname:maxPerStageDescriptorStorageBuffers is the maximum number of storage buffers that can: be accessible to a single shader stage in a pipeline layout. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER or ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC count against this limit. A descriptor is accessible to a pipeline shader stage when the pname:stageFlags member of the sname:VkDescriptorSetLayoutBinding structure has the bit for that shader stage set. See <> and <>. * [[features-limits-maxPerStageDescriptorSampledImages]] pname:maxPerStageDescriptorSampledImages is the maximum number of sampled images that can: be accessible to a single shader stage in a pipeline layout. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER, ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE, or ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER count against this limit. A descriptor is accessible to a pipeline shader stage when the pname:stageFlags member of the sname:VkDescriptorSetLayoutBinding structure has the bit for that shader stage set. See <>, <>, and <>. * [[features-limits-maxPerStageDescriptorStorageImages]] pname:maxPerStageDescriptorStorageImages is the maximum number of storage images that can: be accessible to a single shader stage in a pipeline layout. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE, or ename:VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER count against this limit. A descriptor is accessible to a pipeline shader stage when the pname:stageFlags member of the sname:VkDescriptorSetLayoutBinding structure has the bit for that shader stage set. See <>, and <>. * [[features-limits-maxPerStageDescriptorInputAttachments]] pname:maxPerStageDescriptorInputAttachments is the maximum number of input attachments that can: be accessible to a single shader stage in a pipeline layout. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT count against this limit. A descriptor is accessible to a pipeline shader stage when the pname:stageFlags member of the sname:VkDescriptorSetLayoutBinding structure has the bit for that shader stage set. These are only supported for the fragment stage. See <>. * [[features-limits-maxPerStageResources]] pname:maxPerStageResources is the maximum number of resources that can: be accessible to a single shader stage in a pipeline layout. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER, ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE, ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE, ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER, ename:VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER, ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER, ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER, ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC, ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC, or ename:VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT count against this limit. For the fragment shader stage the framebuffer color attachments also count against this limit. * [[features-limits-maxDescriptorSetSamplers]] pname:maxDescriptorSetSamplers is the maximum number of samplers that can: be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_SAMPLER or ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER count against this limit. See <> and <>. * [[features-limits-maxDescriptorSetUniformBuffers]] pname:maxDescriptorSetUniformBuffers is the maximum number of uniform buffers that can: be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER or ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC count against this limit. See <> and <>. * [[features-limits-maxDescriptorSetUniformBuffersDynamic]] pname:maxDescriptorSetUniformBuffersDynamic is the maximum number of dynamic uniform buffers that can: be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC count against this limit. See <>. * [[features-limits-maxDescriptorSetStorageBuffers]] pname:maxDescriptorSetStorageBuffers is the maximum number of storage buffers that can: be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER or ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC count against this limit. See <> and <>. * [[features-limits-maxDescriptorSetStorageBuffersDynamic]] pname:maxDescriptorSetStorageBuffersDynamic is the maximum number of dynamic storage buffers that can: be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC count against this limit. See <>. * [[features-limits-maxDescriptorSetSampledImages]] pname:maxDescriptorSetSampledImages is the maximum number of sampled images that can: be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER, ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE, or ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER count against this limit. See <>, <>, and <>. * [[features-limits-maxDescriptorSetStorageImages]] pname:maxDescriptorSetStorageImages is the maximum number of storage images that can: be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE, or ename:VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER count against this limit. See <>, and <>. * [[features-limits-maxDescriptorSetInputAttachments]] pname:maxDescriptorSetInputAttachments is the maximum number of input attachments that can: be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptors with a type of ename:VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT count against this limit. See <>. * [[features-limits-maxVertexInputAttributes]] pname:maxVertexInputAttributes is the maximum number of vertex input attributes that can: be specified for a graphics pipeline. These are described in the array of sname:VkVertexInputAttributeDescription structures that are provided at graphics pipeline creation time via the pname:pVertexAttributeDescriptions member of the sname:VkPipelineVertexInputStateCreateInfo structure. See <> and <>. * [[features-limits-maxVertexInputBindings]] pname:maxVertexInputBindings is the maximum number of vertex buffers that can: be specified for providing vertex attributes to a graphics pipeline. These are described in the array of sname:VkVertexInputBindingDescription structures that are provided at graphics pipeline creation time via the pname:pVertexBindingDescriptions member of the sname:VkPipelineVertexInputStateCreateInfo structure. The pname:binding member of sname:VkVertexInputBindingDescription must: be less than this limit. See <>. * [[features-limits-maxVertexInputAttributeOffset]] pname:maxVertexInputAttributeOffset is the maximum vertex input attribute offset that can: be added to the vertex input binding stride. The pname:offset member of the sname:VkVertexInputAttributeDescription structure must: be less than or equal to this limit. See <>. * [[features-limits-maxVertexInputBindingStride]] pname:maxVertexInputBindingStride is the maximum vertex input binding stride that can: be specified in a vertex input binding. The pname:stride member of the sname:VkVertexInputBindingDescription structure must: be less than or equal to this limit. See <>. * [[features-limits-maxVertexOutputComponents]] pname:maxVertexOutputComponents is the maximum number of components of output variables which can: be output by a vertex shader. See <>. * [[features-limits-maxTessellationGenerationLevel]] pname:maxTessellationGenerationLevel is the maximum tessellation generation level supported by the fixed-function tessellation primitive generator. See <>. * [[features-limits-maxTessellationPatchSize]] pname:maxTessellationPatchSize is the maximum patch size, in vertices, of patches that can: be processed by the tessellation control shader and tessellation primitive generator. The pname:patchControlPoints member of the sname:VkPipelineTessellationStateCreateInfo structure specified at pipeline creation time and the value provided in the code:OutputVertices execution mode of shader modules must: be less than or equal to this limit. See <>. * [[features-limits-maxTessellationControlPerVertexInputComponents]] pname:maxTessellationControlPerVertexInputComponents is the maximum number of components of input variables which can: be provided as per-vertex inputs to the tessellation control shader stage. * [[features-limits-maxTessellationControlPerVertexOutputComponents]] pname:maxTessellationControlPerVertexOutputComponents is the maximum number of components of per-vertex output variables which can: be output from the tessellation control shader stage. * [[features-limits-maxTessellationControlPerPatchOutputComponents]] pname:maxTessellationControlPerPatchOutputComponents is the maximum number of components of per-patch output variables which can: be output from the tessellation control shader stage. * [[features-limits-maxTessellationControlTotalOutputComponents]] pname:maxTessellationControlTotalOutputComponents is the maximum total number of components of per-vertex and per-patch output variables which can: be output from the tessellation control shader stage. * [[features-limits-maxTessellationEvaluationInputComponents]] pname:maxTessellationEvaluationInputComponents is the maximum number of components of input variables which can: be provided as per-vertex inputs to the tessellation evaluation shader stage. * [[features-limits-maxTessellationEvaluationOutputComponents]] pname:maxTessellationEvaluationOutputComponents is the maximum number of components of per-vertex output variables which can: be output from the tessellation evaluation shader stage. * [[features-limits-maxGeometryShaderInvocations]] pname:maxGeometryShaderInvocations is the maximum invocation count supported for instanced geometry shaders. The value provided in the code:Invocations execution mode of shader modules must: be less than or equal to this limit. See <>. * [[features-limits-maxGeometryInputComponents]] pname:maxGeometryInputComponents is the maximum number of components of input variables which can: be provided as inputs to the geometry shader stage. * [[features-limits-maxGeometryOutputComponents]] pname:maxGeometryOutputComponents is the maximum number of components of output variables which can: be output from the geometry shader stage. * [[features-limits-maxGeometryOutputVertices]] pname:maxGeometryOutputVertices is the maximum number of vertices which can: be emitted by any geometry shader. * [[features-limits-maxGeometryTotalOutputComponents]] pname:maxGeometryTotalOutputComponents is the maximum total number of components of output, across all emitted vertices, which can: be output from the geometry shader stage. * [[features-limits-maxFragmentInputComponents]] pname:maxFragmentInputComponents is the maximum number of components of input variables which can: be provided as inputs to the fragment shader stage. * [[features-limits-maxFragmentOutputAttachments]] pname:maxFragmentOutputAttachments is the maximum number of output attachments which can: be written to by the fragment shader stage. * [[features-limits-maxFragmentDualSrcAttachments]] pname:maxFragmentDualSrcAttachments is the maximum number of output attachments which can: be written to by the fragment shader stage when blending is enabled and one of the dual source blend modes is in use. See <> and <>. * [[features-limits-maxFragmentCombinedOutputResources]] pname:maxFragmentCombinedOutputResources is the total number of storage buffers, storage images, and output buffers which can: be used in the fragment shader stage. * [[features-limits-maxComputeSharedMemorySize]] pname:maxComputeSharedMemorySize is the maximum total storage size, in bytes, of all variables declared with the code:WorkgroupLocal storage class in shader modules (or with the code:shared storage qualifier in GLSL) in the compute shader stage. * [[features-limits-maxComputeWorkGroupCount]] pname:maxComputeWorkGroupCount[3] is the maximum number of local workgroups that can: be dispatched by a single dispatch command. These three values represent the maximum number of local workgroups for the X, Y, and Z dimensions, respectively. The workgroup count parameters to the dispatch commands must: be less than or equal to the corresponding limit. See <>. * [[features-limits-maxComputeWorkGroupInvocations]] pname:maxComputeWorkGroupInvocations is the maximum total number of compute shader invocations in a single local workgroup. The product of the X, Y, and Z sizes as specified by the code:LocalSize execution mode in shader modules and by the object decorated by the code:WorkgroupSize decoration must: be less than or equal to this limit. * [[features-limits-maxComputeWorkGroupSize]] pname:maxComputeWorkGroupSize[3] is the maximum size of a local compute workgroup, per dimension. These three values represent the maximum local workgroup size in the X, Y, and Z dimensions, respectively. The pname:x, pname:y, and pname:z sizes specified by the code:LocalSize execution mode and by the object decorated by the code:WorkgroupSize decoration in shader modules must: be less than or equal to the corresponding limit. * [[features-limits-subPixelPrecisionBits]] pname:subPixelPrecisionBits is the number of bits of subpixel precision in framebuffer coordinates [eq]#x~f~# and [eq]#y~f~#. See <>. * [[features-limits-subTexelPrecisionBits]] pname:subTexelPrecisionBits is the number of bits of precision in the division along an axis of an image used for minification and magnification filters. [eq]#2^pname:subTexelPrecisionBits^# is the actual number of divisions along each axis of the image represented. The filtering hardware will snap to these locations when computing the filtered results. * [[features-limits-mipmapPrecisionBits]] pname:mipmapPrecisionBits is the number of bits of division that the LOD calculation for mipmap fetching get snapped to when determining the contribution from each mip level to the mip filtered results. [eq]#2^pname:mipmapPrecisionBits^# is the actual number of divisions. + [NOTE] .Note ==== For example, if this value is 2 bits then when linearly filtering between two levels, each level could: contribute: 0%, 33%, 66%, or 100% (this is just an example and the amount of contribution should: be covered by different equations in the spec). ==== * [[features-limits-maxDrawIndexedIndexValue]] pname:maxDrawIndexedIndexValue is the maximum index value that can: be used for indexed draw calls when using 32-bit indices. This excludes the primitive restart index value of 0xFFFFFFFF. See <>. * [[features-limits-maxDrawIndirectCount]] pname:maxDrawIndirectCount is the maximum draw count that is supported for indirect draw calls. See <>. * [[features-limits-maxSamplerLodBias]] pname:maxSamplerLodBias is the maximum absolute sampler level of detail bias. The sum of the pname:mipLodBias member of the sname:VkSamplerCreateInfo structure and the code:Bias operand of image sampling operations in shader modules (or 0 if no code:Bias operand is provided to an image sampling operation) are clamped to the range [eq]#[-pname:maxSamplerLodBias,+pname:maxSamplerLodBias]#. See <>. * [[features-limits-maxSamplerAnisotropy]] pname:maxSamplerAnisotropy is the maximum degree of sampler anisotropy. The maximum degree of anisotropic filtering used for an image sampling operation is the minimum of the pname:maxAnisotropy member of the sname:VkSamplerCreateInfo structure and this limit. See <>. * [[features-limits-maxViewports]] pname:maxViewports is the maximum number of active viewports. The pname:viewportCount member of the sname:VkPipelineViewportStateCreateInfo structure that is provided at pipeline creation must: be less than or equal to this limit. * [[features-limits-maxViewportDimensions]] pname:maxViewportDimensions[2] are the maximum viewport dimensions in the X (width) and Y (height) dimensions, respectively. The maximum viewport dimensions must: be greater than or equal to the largest image which can: be created and used as a framebuffer attachment. See <>. * [[features-limits-viewportboundsrange]] pname:viewportBoundsRange[2] is the [eq]#[minimum, maximum]# range that the corners of a viewport must: be contained in. This range must: be at least [eq]#[-2 {times} pname:size, 2 {times} pname:size - 1]#, where [eq]#pname:size = max(pname:maxViewportDimensions[0], pname:maxViewportDimensions[1])#. See <>. + [NOTE] .Note ==== The intent of the pname:viewportBoundsRange limit is to allow a maximum sized viewport to be arbitrarily shifted relative to the output target as long as at least some portion intersects. This would give a bounds limit of [eq]#[-pname:size {plus} 1, 2 {times} pname:size - 1]# which would allow all possible non-empty-set intersections of the output target and the viewport. Since these numbers are typically powers of two, picking the signed number range using the smallest possible number of bits ends up with the specified range. ==== * [[features-limits-viewportSubPixelBits]] pname:viewportSubPixelBits is the number of bits of subpixel precision for viewport bounds. The subpixel precision that floating-point viewport bounds are interpreted at is given by this limit. * [[features-limits-minMemoryMapAlignment]] pname:minMemoryMapAlignment is the minimum required: alignment, in bytes, of host visible memory allocations within the host address space. When mapping a memory allocation with flink:vkMapMemory, subtracting pname:offset bytes from the returned pointer will always produce an integer multiple of this limit. See <>. * [[features-limits-minTexelBufferOffsetAlignment]] pname:minTexelBufferOffsetAlignment is the minimum required: alignment, in bytes, for the pname:offset member of the sname:VkBufferViewCreateInfo structure for texel buffers. When a buffer view is created for a buffer which was created with ename:VK_BUFFER_USAGE_UNIFORM_TEXEL_BUFFER_BIT or ename:VK_BUFFER_USAGE_STORAGE_TEXEL_BUFFER_BIT set in the pname:usage member of the sname:VkBufferCreateInfo structure, the pname:offset must: be an integer multiple of this limit. * [[features-limits-minUniformBufferOffsetAlignment]] pname:minUniformBufferOffsetAlignment is the minimum required: alignment, in bytes, for the pname:offset member of the sname:VkDescriptorBufferInfo structure for uniform buffers. When a descriptor of type ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER or ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC is updated, the pname:offset must: be an integer multiple of this limit. Similarly, dynamic offsets for uniform buffers must: be multiples of this limit. * [[features-limits-minStorageBufferOffsetAlignment]] pname:minStorageBufferOffsetAlignment is the minimum required: alignment, in bytes, for the pname:offset member of the sname:VkDescriptorBufferInfo structure for storage buffers. When a descriptor of type ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER or ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC is updated, the pname:offset must: be an integer multiple of this limit. Similarly, dynamic offsets for storage buffers must: be multiples of this limit. * [[features-limits-minTexelOffset]] pname:minTexelOffset is the minimum offset value for the code:ConstOffset image operand of any of the code:OpImageSample* or code:OpImageFetch* image instructions. * [[features-limits-maxTexelOffset]] pname:maxTexelOffset is the maximum offset value for the code:ConstOffset image operand of any of the code:OpImageSample* or code:OpImageFetch* image instructions. * [[features-limits-minTexelGatherOffset]] pname:minTexelGatherOffset is the minimum offset value for the code:Offset or code:ConstOffsets image operands of any of the code:OpImage*code:Gather image instructions. * [[features-limits-maxTexelGatherOffset]] pname:maxTexelGatherOffset is the maximum offset value for the code:Offset or code:ConstOffsets image operands of any of the code:OpImage*code:Gather image instructions. * [[features-limits-minInterpolationOffset]] pname:minInterpolationOffset is the minimum negative offset value for the code:offset operand of the code:InterpolateAtOffset extended instruction. * [[features-limits-maxInterpolationOffset]] pname:maxInterpolationOffset is the maximum positive offset value for the code:offset operand of the code:InterpolateAtOffset extended instruction. * [[features-limits-subPixelInterpolationOffsetBits]] pname:subPixelInterpolationOffsetBits is the number of subpixel fractional bits that the code:x and code:y offsets to the code:InterpolateAtOffset extended instruction may: be rounded to as fixed-point values. * [[features-limits-maxFramebufferWidth]] pname:maxFramebufferWidth is the maximum width for a framebuffer. The pname:width member of the sname:VkFramebufferCreateInfo structure must: be less than or equal to this limit. * [[features-limits-maxFramebufferHeight]] pname:maxFramebufferHeight is the maximum height for a framebuffer. The pname:height member of the sname:VkFramebufferCreateInfo structure must: be less than or equal to this limit. * [[features-limits-maxFramebufferLayers]] pname:maxFramebufferLayers is the maximum layer count for a layered framebuffer. The pname:layers member of the sname:VkFramebufferCreateInfo structure must: be less than or equal to this limit. * [[features-limits-framebufferColorSampleCounts]] pname:framebufferColorSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the color sample counts that are supported for all framebuffer color attachments with floating- or fixed-point formats. There is no limit that indicates the color sample counts that are supported for all color attachments with integer formats. * [[features-limits-framebufferDepthSampleCounts]] pname:framebufferDepthSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the supported depth sample counts for all framebuffer depth/stencil attachments, when the format includes a depth component. * pname:framebufferStencilSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the supported stencil sample counts for all framebuffer depth/stencil attachments, when the format includes a stencil component. * pname:framebufferNoAttachmentsSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the supported sample counts for a framebuffer with no attachments. * [[features-limits-maxColorAttachments]] pname:maxColorAttachments is the maximum number of color attachments that can: be used by a subpass in a render pass. The pname:colorAttachmentCount member of the sname:VkSubpassDescription structure must: be less than or equal to this limit. * [[features-limits-sampledImageColorSampleCounts]] pname:sampledImageColorSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the sample counts supported for all 2D images created with ename:VK_IMAGE_TILING_OPTIMAL, pname:usage containing ename:VK_IMAGE_USAGE_SAMPLED_BIT, and a non-integer color format. * [[features-limits-sampledImageIntegerSampleCounts]] pname:sampledImageIntegerSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the sample counts supported for all 2D images created with ename:VK_IMAGE_TILING_OPTIMAL, pname:usage containing ename:VK_IMAGE_USAGE_SAMPLED_BIT, and an integer color format. * [[features-limits-sampledImageDepthSampleCounts]] pname:sampledImageDepthSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the sample counts supported for all 2D images created with ename:VK_IMAGE_TILING_OPTIMAL, pname:usage containing ename:VK_IMAGE_USAGE_SAMPLED_BIT, and a depth format. * [[features-limits-sampledImageStencilSampleCounts]] pname:sampledImageStencilSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the sample supported for all 2D images created with ename:VK_IMAGE_TILING_OPTIMAL, pname:usage containing ename:VK_IMAGE_USAGE_SAMPLED_BIT, and a stencil format. * [[features-limits-storageImageSampleCounts]] pname:storageImageSampleCounts is a bitmask^1^ of elink:VkSampleCountFlagBits indicating the sample counts supported for all 2D images created with ename:VK_IMAGE_TILING_OPTIMAL, and pname:usage containing ename:VK_IMAGE_USAGE_STORAGE_BIT. * [[features-limits-maxSampleMaskWords]] pname:maxSampleMaskWords is the maximum number of array elements of a variable decorated with the code:SampleMask built-in decoration. * [[features-limits-timestampComputeAndGraphics]] pname:timestampComputeAndGraphics indicates support for timestamps on all graphics and compute queues. If this limit is set to ename:VK_TRUE, all queues that advertise the ename:VK_QUEUE_GRAPHICS_BIT or ename:VK_QUEUE_COMPUTE_BIT in the sname:VkQueueFamilyProperties::pname:queueFlags support sname:VkQueueFamilyProperties::pname:timestampValidBits of at least 36. See <>. * [[features-limits-timestampPeriod]] pname:timestampPeriod is the number of nanoseconds required: for a timestamp query to be incremented by 1. See <>. * [[features-limits-maxClipDistances]] pname:maxClipDistances is the maximum number of clip distances that can: be used in a single shader stage. The size of any array declared with the code:ClipDistance built-in decoration in a shader module must: be less than or equal to this limit. * [[features-limits-maxCullDistances]] pname:maxCullDistances is the maximum number of cull distances that can: be used in a single shader stage. The size of any array declared with the code:CullDistance built-in decoration in a shader module must: be less than or equal to this limit. * [[features-limits-maxCombinedClipAndCullDistances]] pname:maxCombinedClipAndCullDistances is the maximum combined number of clip and cull distances that can: be used in a single shader stage. The sum of the sizes of any pair of arrays declared with the code:ClipDistance and code:CullDistance built-in decoration used by a single shader stage in a shader module must: be less than or equal to this limit. * [[features-limits-discreteQueuePriorities]] pname:discreteQueuePriorities is the number of discrete priorities that can: be assigned to a queue based on the value of each member of sname:VkDeviceQueueCreateInfo::pname:pQueuePriorities. This must: be at least 2, and levels must: be spread evenly over the range, with at least one level at 1.0, and another at 0.0. See <>. * [[features-limits-pointSizeRange]] pname:pointSizeRange[2] is the range [eq]#[pname:minimum,pname:maximum]# of supported sizes for points. Values written to variables decorated with the code:PointSize built-in decoration are clamped to this range. * [[features-limits-lineWidthRange]] pname:lineWidthRange[2] is the range [eq]#[pname:minimum,pname:maximum]# of supported widths for lines. Values specified by the pname:lineWidth member of the sname:VkPipelineRasterizationStateCreateInfo or the pname:lineWidth parameter to fname:vkCmdSetLineWidth are clamped to this range. * [[features-limits-pointSizeGranularity]] pname:pointSizeGranularity is the granularity of supported point sizes. Not all point sizes in the range defined by pname:pointSizeRange are supported. This limit specifies the granularity (or increment) between successive supported point sizes. * [[features-limits-lineWidthGranularity]] pname:lineWidthGranularity is the granularity of supported line widths. Not all line widths in the range defined by pname:lineWidthRange are supported. This limit specifies the granularity (or increment) between successive supported line widths. * [[features-limits-strictLines]] pname:strictLines indicates whether lines are rasterized according to the preferred method of rasterization. If set to ename:VK_FALSE, lines may: be rasterized under a relaxed set of rules. If set to ename:VK_TRUE, lines are rasterized as per the strict definition. See <>. * [[features-limits-standardSampleLocations]] pname:standardSampleLocations indicates whether rasterization uses the standard sample locations as documented in <>. If set to ename:VK_TRUE, the implementation uses the documented sample locations. If set to ename:VK_FALSE, the implementation may: use different sample locations. * [[features-limits-optimalBufferCopyOffsetAlignment]] pname:optimalBufferCopyOffsetAlignment is the optimal buffer offset alignment in bytes for fname:vkCmdCopyBufferToImage and fname:vkCmdCopyImageToBuffer. The per texel alignment requirements are enforced, but applications should: use the optimal alignment for optimal performance and power use. * [[features-limits-optimalBufferCopyRowPitchAlignment]] pname:optimalBufferCopyRowPitchAlignment is the optimal buffer row pitch alignment in bytes for fname:vkCmdCopyBufferToImage and fname:vkCmdCopyImageToBuffer. Row pitch is the number of bytes between texels with the same X coordinate in adjacent rows (Y coordinates differ by one). The per texel alignment requirements are enforced, but applications should: use the optimal alignment for optimal performance and power use. * [[features-limits-nonCoherentAtomSize]] pname:nonCoherentAtomSize is the size and alignment in bytes that bounds concurrent access to <>. ifdef::VK_EXT_discard_rectangles[] * [[features-limits-maxDiscardRectangles]] pname:maxDiscardRectangles is the maximum number of active discard rectangles. pname:maxDiscardRectangles is a member of the slink:VkPhysicalDeviceDiscardRectanglePropertiesEXT structure. This limit can be queried by setting the pname:pNext pointer from a slink:VkPhysicalDeviceProperties2KHR object to an instance of slink:VkPhysicalDeviceDiscardRectanglePropertiesEXT and using fname:vkGetPhysicalDeviceProperties2KHR to fill out the members. endif::VK_EXT_discard_rectangles[] ifdef::VK_KHR_maintenance2[] * [[features-limits-pointClipping]] sname:VkPhysicalDevicePointClippingPropertiesKHR::pname:pointClippingBehavior defines the clipping behavior of points. This limit can be queried by setting the pname:pNext pointer from a slink:VkPhysicalDeviceProperties2KHR object to an instance of slink:VkPhysicalDevicePointClippingPropertiesKHR and using fname:vkGetPhysicalDeviceProperties2KHR to fill out the members. endif::VK_KHR_maintenance2[] // refBody VkPhysicalDeviceLimits 1:: For all bitmasks of elink:VkSampleCountFlagBits, the sample count limits defined above represent the minimum supported sample counts for each image type. Individual images may: support additional sample counts, which are queried using flink:vkGetPhysicalDeviceImageFormatProperties as described in <>. include::../validity/structs/VkPhysicalDeviceLimits.txt[] -- [open,refpage='VkSampleCountFlagBits',desc='Bitmask specifying sample counts supported for an image used for storage operations',type='enums'] -- Bits which may: be set in the sample count limits returned by slink:VkPhysicalDeviceLimits, as well as in other queries and structures representing image sample counts, are: include::../api/enums/VkSampleCountFlagBits.txt[] * ename:VK_SAMPLE_COUNT_1_BIT specifies an image with one sample per pixel. * ename:VK_SAMPLE_COUNT_2_BIT specifies an image with 2 samples per pixel. * ename:VK_SAMPLE_COUNT_4_BIT specifies an image with 4 samples per pixel. * ename:VK_SAMPLE_COUNT_8_BIT specifies an image with 8 samples per pixel. * ename:VK_SAMPLE_COUNT_16_BIT specifies an image with 16 samples per pixel. * ename:VK_SAMPLE_COUNT_32_BIT specifies an image with 32 samples per pixel. * ename:VK_SAMPLE_COUNT_64_BIT specifies an image with 64 samples per pixel. -- ifdef::VK_KHR_push_descriptor[] [open,refpage='VkPhysicalDevicePushDescriptorPropertiesKHR',desc='Structure describing push descriptor limits that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDevicePushDescriptorPropertiesKHR structure is defined as: include::../api/structs/VkPhysicalDevicePushDescriptorPropertiesKHR.txt[] The members of the sname:VkPhysicalDevicePushDescriptorPropertiesKHR structure describe the following implementation-dependent limits: * [[features-limits-maxPushDescriptors]] pname:maxPushDescriptors is the maximum number of descriptors that can: be used in a descriptor set created with ename:VK_DESCRIPTOR_SET_LAYOUT_CREATE_PUSH_DESCRIPTOR_BIT_KHR set. include::../validity/structs/VkPhysicalDevicePushDescriptorPropertiesKHR.txt[] -- endif::VK_KHR_push_descriptor[] ifdef::VK_KHX_multiview[] [open,refpage='VkPhysicalDeviceMultiviewPropertiesKHX',desc='Structure describing multiview limits that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceMultiviewPropertiesKHX structure is defined as: include::../api/structs/VkPhysicalDeviceMultiviewPropertiesKHX.txt[] The members of the sname:VkPhysicalDeviceMultiviewPropertiesKHX structure describe the following implementation-dependent limits: * [[features-limits-maxMultiviewViewCount]] pname:maxMultiviewViewCount is one greater than the maximum view index that can: be used in a subpass. * [[features-limits-maxMultiviewInstanceIndex]] pname:maxMultiviewInstanceIndex is the maximum valid value of instance index allowed to be generated by a drawing command recorded within a subpass of a multiview render pass instance. include::../validity/structs/VkPhysicalDeviceMultiviewPropertiesKHX.txt[] If the sname:VkPhysicalDeviceMultiviewPropertiesKHX structure is included in the pname:pNext chain of slink:VkPhysicalDeviceProperties2KHR, it is filled with the implementation-dependent limits. -- endif::VK_KHX_multiview[] ifdef::VK_EXT_discard_rectangles[] [open,refpage='VkPhysicalDeviceDiscardRectanglePropertiesEXT',desc='Structure describing discard rectangle limits that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceDiscardRectanglePropertiesEXT structure is defined as: include::../api/structs/VkPhysicalDeviceDiscardRectanglePropertiesEXT.txt[] The members of the sname:VkPhysicalDeviceDiscardRectanglePropertiesEXT structure describe the following implementation-dependent limits: * [[features-limits-maxDiscardRectangles]] pname:maxDiscardRectangles is the maximum number of discard rectangles that can: be specified. include::../validity/structs/VkPhysicalDeviceDiscardRectanglePropertiesEXT.txt[] If the sname:VkPhysicalDeviceDiscardRectanglePropertiesEXT structure is included in the pname:pNext chain of slink:VkPhysicalDeviceProperties2KHR, it is filled with the implementation-dependent limits. -- endif::VK_EXT_discard_rectangles[] ifdef::VK_EXT_sample_locations[] [open,refpage='VkPhysicalDeviceSampleLocationsPropertiesEXT',desc='Structure describing sample location limits that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceSampleLocationsPropertiesEXT structure is defined as: include::../api/structs/VkPhysicalDeviceSampleLocationsPropertiesEXT.txt[] The members of the sname:VkPhysicalDeviceSampleLocationsPropertiesEXT structure describe the following implementation-dependent limits: * [[features-limits-sampleLocationSampleCounts]] pname:sampleLocationSampleCounts is a bitmask of elink:VkSampleCountFlagBits indicating the sample counts supporting custom sample locations. * [[features-limits-maxSampleLocationGridSize]] pname:maxSampleLocationGridSize is the maximum size of the pixel grid in which sample locations can: vary that is supported for all sample counts in pname:sampleLocationSampleCounts. * [[features-limits-sampleLocationCoordinateRange]] pname:sampleLocationCoordinateRange[2] is the range of supported sample location coordinates. * [[features-limits-sampleLocationSubPixelBits]] pname:sampleLocationSubPixelBits is the number of bits of subpixel precision for sample locations. * [[features-limits-variableSampleLocations]] pname:variableSampleLocations indicates whether the sample locations used by all pipelines that will be bound to a command buffer during a subpass must: match. If set to ename:VK_TRUE, the implementation supports variable sample locations in a subpass. If set to ename:VK_FALSE, then the sample locations must: stay constant in any given subpass. include::../validity/structs/VkPhysicalDeviceSampleLocationsPropertiesEXT.txt[] If the sname:VkPhysicalDeviceSampleLocationsPropertiesEXT structure is included in the pname:pNext chain of slink:VkPhysicalDeviceProperties2KHR, it is filled with the implementation-dependent limits. -- endif::VK_EXT_sample_locations[] ifdef::VK_NVX_multiview_per_view_attributes[] [open,refpage='VkPhysicalDeviceMultiviewPerViewAttributesPropertiesNVX',desc='Structure describing multiview limits that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceMultiviewPerViewAttributesPropertiesNVX structure is defined as: include::../api/structs/VkPhysicalDeviceMultiviewPerViewAttributesPropertiesNVX.txt[] The members of the sname:VkPhysicalDeviceMultiviewPerViewAttributesPropertiesNVX structure describe the following implementation-dependent limits: * [[features-limits-perViewPositionAllComponents]] pname:perViewPositionAllComponents is ename:VK_TRUE if the implementation supports per-view position values that differ in components other than the X component. include::../validity/structs/VkPhysicalDeviceMultiviewPerViewAttributesPropertiesNVX.txt[] If the sname:VkPhysicalDeviceMultiviewPerViewAttributesPropertiesNVX structure is included in the pname:pNext chain of slink:VkPhysicalDeviceProperties2KHR, it is filled with the implementation-dependent limits. -- endif::VK_NVX_multiview_per_view_attributes[] ifdef::VK_KHR_maintenance2[] [open,refpage='VkPhysicalDevicePointClippingPropertiesKHR',desc='Structure describing the point clipping behavior supported by an implementation',type='structs'] -- The sname:VkPhysicalDevicePointClippingPropertiesKHR structure is defined as: include::../api/structs/VkPhysicalDevicePointClippingPropertiesKHR.txt[] The members of the sname:VkPhysicalDevicePointClippingPropertiesKHR structure describe the following implementation-dependent limit: * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:pointClippingBehavior is the point clipping behavior supported by the implementation, and is of type elink:VkPointClippingBehaviorKHR. If the sname:VkPhysicalDevicePointClippingPropertiesKHR structure is included in the pname:pNext chain of flink:VkPhysicalDeviceProperties2KHR, it is filled with the implementation-dependent limits. include::../validity/structs/VkPhysicalDevicePointClippingPropertiesKHR.txt[] -- endif::VK_KHR_maintenance2[] ifdef::VK_EXT_blend_operation_advanced[] [open,refpage='VkPhysicalDeviceBlendOperationAdvancedPropertiesEXT',desc='Structure describing advanced blending limits that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceBlendOperationAdvancedPropertiesEXT structure is defined as: include::../api/structs/VkPhysicalDeviceBlendOperationAdvancedPropertiesEXT.txt[] The members of the sname:VkPhysicalDeviceBlendOperationAdvancedPropertiesEXT structure describe the following implementation-dependent limits: * [[features-limits-advancedBlendMaxColorAttachments]] pname:advancedBlendMaxColorAttachments is one greater than the highest color attachment index that can: be used in a subpass, for a pipeline that uses an <>. * [[features-limits-advancedBlendIndependentBlend]] pname:advancedBlendIndependentBlend indicates whether advanced blend operations can: vary per-attachment. * [[features-limits-advancedBlendNonPremultipliedSrcColor]] pname:advancedBlendNonPremultipliedSrcColor indicates whether the source color can: be treated as non-premultiplied. If this is ename:VK_FALSE, then slink:VkPipelineColorBlendAdvancedStateCreateInfoEXT::pname:srcPremultiplied must: be ename:VK_TRUE. * [[features-limits-advancedBlendNonPremultipliedDstColor]] pname:advancedBlendNonPremultipliedDstColor indicates whether the destination color can: be treated as non-premultiplied. If this is ename:VK_FALSE, then slink:VkPipelineColorBlendAdvancedStateCreateInfoEXT::pname:dstPremultiplied must: be ename:VK_TRUE. * [[features-limits-advancedBlendCorrelatedOverlap]] pname:advancedBlendCorrelatedOverlap indicates whether the overlap mode can: be treated as correlated. If this is ename:VK_FALSE, then slink:VkPipelineColorBlendAdvancedStateCreateInfoEXT::pname:blendOverlap must: be ename:VK_BLEND_OVERLAP_UNCORRELATED_EXT. * [[features-limits-advancedBlendAllOperations]] pname:advancedBlendAllOperations indicates whether all advanced blend operation enums are supported. See the valid usage of slink:VkPipelineColorBlendAttachmentState. include::../validity/structs/VkPhysicalDeviceBlendOperationAdvancedPropertiesEXT.txt[] If the sname:VkPhysicalDeviceBlendOperationAdvancedPropertiesEXT structure is included in the pname:pNext chain of slink:VkPhysicalDeviceProperties2KHR, it is filled with the implementation-dependent limits. -- endif::VK_EXT_blend_operation_advanced[] ifdef::VK_EXT_sampler_filter_minmax[] [open,refpage='VkPhysicalDeviceSamplerFilterMinmaxPropertiesEXT',desc='Structure describing sampler filter minmax limits that can be supported by an implementation',type='structs'] -- The sname:VkPhysicalDeviceSamplerFilterMinmaxPropertiesEXT structure is defined as: include::../api/structs/VkPhysicalDeviceSamplerFilterMinmaxPropertiesEXT.txt[] The members of the sname:VkPhysicalDeviceSamplerFilterMinmaxPropertiesEXT structure describe the following implementation-dependent limits: * [[features-limits-filterMinmaxSingleComponentFormats]] pname:filterMinmaxSingleComponentFormats is a boolean value indicating whether a minimum set of required formats support min/max filtering. * [[features-limits-filterMinmaxImageComponentMapping]] pname:filterMinmaxImageComponentMapping is a boolean value indicating whether the implementation supports non-identity component mapping of the image when doing min/max filtering. If the sname:VkPhysicalDeviceSamplerFilterMinmaxPropertiesEXT structure is included in the pname:pNext chain of slink:VkPhysicalDeviceProperties2KHR, it is filled with the implementation-dependent limits. If pname:filterMinmaxSingleComponentFormats is ename:VK_TRUE, the following formats must: support the ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_MINMAX_BIT_EXT feature with ename:VK_IMAGE_TILING_OPTIMAL, if they support ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT. * ename:VK_FORMAT_R8_UNORM * ename:VK_FORMAT_R8_SNORM * ename:VK_FORMAT_R16_UNORM * ename:VK_FORMAT_R16_SNORM * ename:VK_FORMAT_R16_SFLOAT * ename:VK_FORMAT_R32_SFLOAT * ename:VK_FORMAT_D16_UNORM * ename:VK_FORMAT_X8_D24_UNORM_PACK32 * ename:VK_FORMAT_D32_SFLOAT * ename:VK_FORMAT_D16_UNORM_S8_UINT * ename:VK_FORMAT_D24_UNORM_S8_UINT * ename:VK_FORMAT_D32_SFLOAT_S8_UINT If the format is a depth/stencil format, this bit only indicates that the depth aspect (not the stencil aspect) of an image of this format supports min/max filtering, and that min/max filtering of the depth aspect is supported when depth compare is disabled in the sampler. If pname:filterMinmaxImageComponentMapping is ename:VK_FALSE the component mapping of the image view used with min/max filtering must: have been created with the pname:r component set to ename:VK_COMPONENT_SWIZZLE_IDENTITY. Only the pname:r component of the sampled image value is defined and the other component values are undefined. If pname:filterMinmaxImageComponentMapping is ename:VK_TRUE this restriction does not apply and image component mapping works as normal. include::../validity/structs/VkPhysicalDeviceSamplerFilterMinmaxPropertiesEXT.txt[] -- endif::VK_EXT_sampler_filter_minmax[] [[features-limits-minmax]] === Limit Requirements The following table specifies the required: minimum/maximum for all Vulkan graphics implementations. Where a limit corresponds to a fine-grained device feature which is optional:, the feature name is listed with two required: limits, one when the feature is supported and one when it is not supported. If an implementation supports a feature, the limits reported are the same whether or not the feature is enabled. [[features-limits-types]] .Required Limit Types [width="100%",cols="<20%,<50%,<30%",options="header"] |==== | Type | Limit | Feature | code:uint32_t | pname:maxImageDimension1D | - | code:uint32_t | pname:maxImageDimension2D | - | code:uint32_t | pname:maxImageDimension3D | - | code:uint32_t | pname:maxImageDimensionCube | - | code:uint32_t | pname:maxImageArrayLayers | - | code:uint32_t | pname:maxTexelBufferElements | - | code:uint32_t | pname:maxUniformBufferRange | - | code:uint32_t | pname:maxStorageBufferRange | - | code:uint32_t | pname:maxPushConstantsSize | - | code:uint32_t | pname:maxMemoryAllocationCount | - | code:uint32_t | pname:maxSamplerAllocationCount | - | basetype:VkDeviceSize | pname:bufferImageGranularity | - | basetype:VkDeviceSize | pname:sparseAddressSpaceSize | sparseBinding | code:uint32_t | pname:maxBoundDescriptorSets | - | code:uint32_t | pname:maxPerStageDescriptorSamplers | - | code:uint32_t | pname:maxPerStageDescriptorUniformBuffers | - | code:uint32_t | pname:maxPerStageDescriptorStorageBuffers | - | code:uint32_t | pname:maxPerStageDescriptorSampledImages | - | code:uint32_t | pname:maxPerStageDescriptorStorageImages | - | code:uint32_t | pname:maxPerStageDescriptorInputAttachments| - | code:uint32_t | pname:maxPerStageResources | - | code:uint32_t | pname:maxDescriptorSetSamplers | - | code:uint32_t | pname:maxDescriptorSetUniformBuffers | - | code:uint32_t | pname:maxDescriptorSetUniformBuffersDynamic| - | code:uint32_t | pname:maxDescriptorSetStorageBuffers | - | code:uint32_t | pname:maxDescriptorSetStorageBuffersDynamic| - | code:uint32_t | pname:maxDescriptorSetSampledImages | - | code:uint32_t | pname:maxDescriptorSetStorageImages | - | code:uint32_t | pname:maxDescriptorSetInputAttachments | - | code:uint32_t | pname:maxVertexInputAttributes | - | code:uint32_t | pname:maxVertexInputBindings | - | code:uint32_t | pname:maxVertexInputAttributeOffset | - | code:uint32_t | pname:maxVertexInputBindingStride | - | code:uint32_t | pname:maxVertexOutputComponents | - | code:uint32_t | pname:maxTessellationGenerationLevel | pname:tessellationShader | code:uint32_t | pname:maxTessellationPatchSize | pname:tessellationShader | code:uint32_t | pname:maxTessellationControlPerVertexInputComponents | pname:tessellationShader | code:uint32_t | pname:maxTessellationControlPerVertexOutputComponents | pname:tessellationShader | code:uint32_t | pname:maxTessellationControlPerPatchOutputComponents | pname:tessellationShader | code:uint32_t | pname:maxTessellationControlTotalOutputComponents | pname:tessellationShader | code:uint32_t | pname:maxTessellationEvaluationInputComponents | pname:tessellationShader | code:uint32_t | pname:maxTessellationEvaluationOutputComponents | pname:tessellationShader | code:uint32_t | pname:maxGeometryShaderInvocations | pname:geometryShader | code:uint32_t | pname:maxGeometryInputComponents | pname:geometryShader | code:uint32_t | pname:maxGeometryOutputComponents | pname:geometryShader | code:uint32_t | pname:maxGeometryOutputVertices | pname:geometryShader | code:uint32_t | pname:maxGeometryTotalOutputComponents | pname:geometryShader | code:uint32_t | pname:maxFragmentInputComponents | - | code:uint32_t | pname:maxFragmentOutputAttachments | - | code:uint32_t | pname:maxFragmentDualSrcAttachments | pname:dualSrcBlend | code:uint32_t | pname:maxFragmentCombinedOutputResources | - | code:uint32_t | pname:maxComputeSharedMemorySize | - | 3 {times} code:uint32_t | pname:maxComputeWorkGroupCount | - | code:uint32_t | pname:maxComputeWorkGroupInvocations | - | 3 {times} code:uint32_t | pname:maxComputeWorkGroupSize | - | code:uint32_t | pname:subPixelPrecisionBits | - | code:uint32_t | pname:subTexelPrecisionBits | - | code:uint32_t | pname:mipmapPrecisionBits | - | code:uint32_t | pname:maxDrawIndexedIndexValue | pname:fullDrawIndexUint32 | code:uint32_t | pname:maxDrawIndirectCount | pname:multiDrawIndirect | code:float | pname:maxSamplerLodBias | - | code:float | pname:maxSamplerAnisotropy | pname:samplerAnisotropy | code:uint32_t | pname:maxViewports | pname:multiViewport | 2 {times} code:uint32_t | pname:maxViewportDimensions | - | 2 {times} code:float | pname:viewportBoundsRange | - | code:uint32_t | pname:viewportSubPixelBits | - | code:size_t | pname:minMemoryMapAlignment | - | basetype:VkDeviceSize | pname:minTexelBufferOffsetAlignment | - | basetype:VkDeviceSize | pname:minUniformBufferOffsetAlignment | - | basetype:VkDeviceSize | pname:minStorageBufferOffsetAlignment | - | code:int32_t | pname:minTexelOffset | - | code:uint32_t | pname:maxTexelOffset | - | code:int32_t | pname:minTexelGatherOffset | pname:shaderImageGatherExtended | code:uint32_t | pname:maxTexelGatherOffset | pname:shaderImageGatherExtended | code:float | pname:minInterpolationOffset | pname:sampleRateShading | code:float | pname:maxInterpolationOffset | pname:sampleRateShading | code:uint32_t | pname:subPixelInterpolationOffsetBits | pname:sampleRateShading | code:uint32_t | pname:maxFramebufferWidth | - | code:uint32_t | pname:maxFramebufferHeight | - | code:uint32_t | pname:maxFramebufferLayers | - | elink:VkSampleCountFlags | pname:framebufferColorSampleCounts | - | elink:VkSampleCountFlags | pname:framebufferDepthSampleCounts | - | elink:VkSampleCountFlags | pname:framebufferStencilSampleCounts | - | elink:VkSampleCountFlags | pname:framebufferNoAttachmentsSampleCounts | - | code:uint32_t | pname:maxColorAttachments | - | elink:VkSampleCountFlags | pname:sampledImageColorSampleCounts | - | elink:VkSampleCountFlags | pname:sampledImageIntegerSampleCounts | - | elink:VkSampleCountFlags | pname:sampledImageDepthSampleCounts | - | elink:VkSampleCountFlags | pname:sampledImageStencilSampleCounts | - | elink:VkSampleCountFlags | pname:storageImageSampleCounts | pname:shaderStorageImageMultisample | code:uint32_t | pname:maxSampleMaskWords | - | basetype:VkBool32 | pname:timestampComputeAndGraphics | - | code:float | pname:timestampPeriod | - | code:uint32_t | pname:maxClipDistances | pname:shaderClipDistance | code:uint32_t | pname:maxCullDistances | pname:shaderCullDistance | code:uint32_t | pname:maxCombinedClipAndCullDistances | pname:shaderCullDistance | code:uint32_t | pname:discreteQueuePriorities | - | 2 {times} code:float | pname:pointSizeRange | pname:largePoints | 2 {times} code:float | pname:lineWidthRange | pname:wideLines | code:float | pname:pointSizeGranularity | pname:largePoints | code:float | pname:lineWidthGranularity | pname:wideLines | basetype:VkBool32 | pname:strictLines | - | basetype:VkBool32 | pname:standardSampleLocations | - | basetype:VkDeviceSize | pname:optimalBufferCopyOffsetAlignment | - | basetype:VkDeviceSize | pname:optimalBufferCopyRowPitchAlignment | - | basetype:VkDeviceSize | pname:nonCoherentAtomSize | - ifdef::VK_EXT_discard_rectangles[] | code:uint32_t | pname:maxDiscardRectangles | +VK_EXT_discard_rectangles+ endif::VK_EXT_discard_rectangles[] ifdef::VK_EXT_sampler_filter_minmax[] | basetype:VkBool32 | pname:filterMinmaxSingleComponentFormats | VK_EXT_sampler_filter_minmax | basetype:VkBool32 | pname:filterMinmaxImageComponentMapping | VK_EXT_sampler_filter_minmax endif::VK_EXT_sampler_filter_minmax[] |==== [[features-limits-required]] .Required Limits [width="100%",cols="<35,<9,<14,<11",options="header"] |==== | Limit | Unsupported Limit | Supported Limit | Limit Type^1^ | pname:maxImageDimension1D | - | 4096 | min | pname:maxImageDimension2D | - | 4096 | min | pname:maxImageDimension3D | - | 256 | min | pname:maxImageDimensionCube | - | 4096 | min | pname:maxImageArrayLayers | - | 256 | min | pname:maxTexelBufferElements | - | 65536 | min | pname:maxUniformBufferRange | - | 16384 | min | pname:maxStorageBufferRange | - | 2^27^ | min | pname:maxPushConstantsSize | - | 128 | min | pname:maxMemoryAllocationCount | - | 4096 | min | pname:maxSamplerAllocationCount | - | 4000 | min | pname:bufferImageGranularity | - | 131072 | max | pname:sparseAddressSpaceSize | 0 | 2^31^ | min | pname:maxBoundDescriptorSets | - | 4 | min | pname:maxPerStageDescriptorSamplers | - | 16 | min | pname:maxPerStageDescriptorUniformBuffers | - | 12 | min | pname:maxPerStageDescriptorStorageBuffers | - | 4 | min | pname:maxPerStageDescriptorSampledImages | - | 16 | min | pname:maxPerStageDescriptorStorageImages | - | 4 | min | pname:maxPerStageDescriptorInputAttachments| - | 4 | min | pname:maxPerStageResources | - | 128 ^2^ | min | pname:maxDescriptorSetSamplers | - | 96 ^8^ | min, _n_ {times} PerStage | pname:maxDescriptorSetUniformBuffers | - | 72 ^8^ | min, _n_ {times} PerStage | pname:maxDescriptorSetUniformBuffersDynamic| - | 8 | min | pname:maxDescriptorSetStorageBuffers | - | 24 ^8^ | min, _n_ {times} PerStage | pname:maxDescriptorSetStorageBuffersDynamic| - | 4 | min | pname:maxDescriptorSetSampledImages | - | 96 ^8^ | min, _n_ {times} PerStage | pname:maxDescriptorSetStorageImages | - | 24 ^8^ | min, _n_ {times} PerStage | pname:maxDescriptorSetInputAttachments | - | 4 | min | pname:maxVertexInputAttributes | - | 16 | min | pname:maxVertexInputBindings | - | 16 | min | pname:maxVertexInputAttributeOffset | - | 2047 | min | pname:maxVertexInputBindingStride | - | 2048 | min | pname:maxVertexOutputComponents | - | 64 | min | pname:maxTessellationGenerationLevel | 0 | 64 | min | pname:maxTessellationPatchSize | 0 | 32 | min | pname:maxTessellationControlPerVertexInputComponents | 0 |64 | min | pname:maxTessellationControlPerVertexOutputComponents | 0 |64 | min | pname:maxTessellationControlPerPatchOutputComponents | 0 |120 | min | pname:maxTessellationControlTotalOutputComponents | 0 |2048 | min | pname:maxTessellationEvaluationInputComponents | 0 |64 | min | pname:maxTessellationEvaluationOutputComponents | 0 |64 | min | pname:maxGeometryShaderInvocations | 0 | 32 | min | pname:maxGeometryInputComponents | 0 | 64 | min | pname:maxGeometryOutputComponents | 0 | 64 | min | pname:maxGeometryOutputVertices | 0 | 256 | min | pname:maxGeometryTotalOutputComponents | 0 | 1024 | min | pname:maxFragmentInputComponents | - | 64 | min | pname:maxFragmentOutputAttachments | - | 4 | min | pname:maxFragmentDualSrcAttachments | 0 | 1 | min | pname:maxFragmentCombinedOutputResources | - | 4 | min | pname:maxComputeSharedMemorySize | - | 16384 | min | pname:maxComputeWorkGroupCount | - | (65535,65535,65535) | min | pname:maxComputeWorkGroupInvocations | - | 128 | min | pname:maxComputeWorkGroupSize | - | (128,128,64) | min | pname:subPixelPrecisionBits | - | 4 | min | pname:subTexelPrecisionBits | - | 4 | min | pname:mipmapPrecisionBits | - | 4 | min | pname:maxDrawIndexedIndexValue | 2^24^-1 | 2^32^-1 | min | pname:maxDrawIndirectCount | 1 | 2^16^-1 | min | pname:maxSamplerLodBias | - | 2 | min | pname:maxSamplerAnisotropy | 1 | 16 | min | pname:maxViewports | 1 | 16 | min | pname:maxViewportDimensions | - | (4096,4096) ^3^ | min | pname:viewportBoundsRange | - | (-8192,8191) ^4^ | (max,min) | pname:viewportSubPixelBits | - | 0 | min | pname:minMemoryMapAlignment | - | 64 | min | pname:minTexelBufferOffsetAlignment | - | 256 | max | pname:minUniformBufferOffsetAlignment | - | 256 | max | pname:minStorageBufferOffsetAlignment | - | 256 | max | pname:minTexelOffset | - | -8 | max | pname:maxTexelOffset | - | 7 | min | pname:minTexelGatherOffset | 0 | -8 | max | pname:maxTexelGatherOffset | 0 | 7 | min | pname:minInterpolationOffset |0.0| -0.5 ^5^ | max | pname:maxInterpolationOffset |0.0| 0.5 - (1 ULP) ^5^ | min | pname:subPixelInterpolationOffsetBits | 0 | 4 ^5^ | min | pname:maxFramebufferWidth | - | 4096 | min | pname:maxFramebufferHeight | - | 4096 | min | pname:maxFramebufferLayers | - | 256 | min | pname:framebufferColorSampleCounts | - | (ename:VK_SAMPLE_COUNT_1_BIT \| ename:VK_SAMPLE_COUNT_4_BIT) | min | pname:framebufferDepthSampleCounts | - | (ename:VK_SAMPLE_COUNT_1_BIT \| ename:VK_SAMPLE_COUNT_4_BIT) | min | pname:framebufferStencilSampleCounts | - | (ename:VK_SAMPLE_COUNT_1_BIT \| ename:VK_SAMPLE_COUNT_4_BIT) | min | pname:framebufferNoAttachmentsSampleCounts | - | (ename:VK_SAMPLE_COUNT_1_BIT \| ename:VK_SAMPLE_COUNT_4_BIT) | min | pname:maxColorAttachments | - | 4 | min | pname:sampledImageColorSampleCounts | - | (ename:VK_SAMPLE_COUNT_1_BIT \| ename:VK_SAMPLE_COUNT_4_BIT) | min | pname:sampledImageIntegerSampleCounts | - | ename:VK_SAMPLE_COUNT_1_BIT | min | pname:sampledImageDepthSampleCounts | - | (ename:VK_SAMPLE_COUNT_1_BIT \| ename:VK_SAMPLE_COUNT_4_BIT) | min | pname:sampledImageStencilSampleCounts | - | (ename:VK_SAMPLE_COUNT_1_BIT \| ename:VK_SAMPLE_COUNT_4_BIT) | min | pname:storageImageSampleCounts | ename:VK_SAMPLE_COUNT_1_BIT | (ename:VK_SAMPLE_COUNT_1_BIT \| ename:VK_SAMPLE_COUNT_4_BIT) | min | pname:maxSampleMaskWords | - | 1 | min | pname:timestampComputeAndGraphics | - | - |implementation dependent | pname:timestampPeriod | - | - |duration | pname:maxClipDistances | 0 | 8 | min | pname:maxCullDistances | 0 | 8 | min | pname:maxCombinedClipAndCullDistances | 0 | 8 | min | pname:discreteQueuePriorities | - | 2 | min | pname:pointSizeRange | (1.0,1.0) | (1.0,64.0 - ULP)^6^| (max,min) | pname:lineWidthRange | (1.0,1.0) | (1.0,8.0 - ULP)^7^ | (max,min) | pname:pointSizeGranularity | 0.0 | 1.0 ^6^ | max, fixed point increment | pname:lineWidthGranularity | 0.0 | 1.0 ^7^ | max, fixed point increment | pname:strictLines | - | - | implementation dependent | pname:standardSampleLocations | - | - | implementation dependent | pname:optimalBufferCopyOffsetAlignment | - | - | recommendation | pname:optimalBufferCopyRowPitchAlignment | - | - | recommendation | pname:nonCoherentAtomSize | - | 256 | max ifdef::VK_KHR_push_descriptor[] | pname:maxPushDescriptors | - | 32 | min endif::VK_KHR_push_descriptor[] ifdef::VK_KHX_multiview[] | pname:maxMultiviewViewCount | - | 6 | min | pname:maxMultiviewInstanceIndex | - | 2^27^-1 | min endif::VK_KHX_multiview[] ifdef::VK_EXT_discard_rectangles[] | pname:maxDiscardRectangles | 0 | 4 | min endif::VK_EXT_discard_rectangles[] ifdef::VK_EXT_sample_locations[] | pname:sampleLocationSampleCounts | - | ename:VK_SAMPLE_COUNT_4_BIT | min | pname:maxSampleLocationGridSize | - | (1,1) | min | pname:sampleLocationCoordinateRange | - | (0.0, 0.9375) | (max,min) | pname:sampleLocationSubPixelBits | - | 4 | min | pname:variableSampleLocations | - |false| implementation dependent endif::VK_EXT_sample_locations[] ifdef::VK_NVX_multiview_per_view_attributes[] | pname:perViewPositionAllComponents | - | - | implementation dependent endif::VK_NVX_multiview_per_view_attributes[] ifdef::VK_EXT_sampler_filter_minmax[] | pname:filterMinmaxSingleComponentFormats | - | - | implementation dependent | pname:filterMinmaxImageComponentMapping | - | - | implementation dependent endif::VK_EXT_sampler_filter_minmax[] ifdef::VK_EXT_blend_operation_advanced[] | pname:advancedBlendMaxColorAttachments | - | 1 | min | pname:advancedBlendIndependentBlend | - |false| implementation dependent | pname:advancedBlendNonPremultipliedSrcColor | - |false| implementation dependent | pname:advancedBlendNonPremultipliedDstColor | - |false| implementation dependent | pname:advancedBlendCorrelatedOverlap | - |false| implementation dependent | pname:advancedBlendAllOperations | - |false| implementation dependent endif::VK_EXT_blend_operation_advanced[] |==== 1:: The *Limit Type* column indicates the limit is either the minimum limit all implementations must: support or the maximum limit all implementations must: support. For bitmasks a minimum limit is the least bits all implementations must: set, but they may: have additional bits set beyond this minimum. 2:: The pname:maxPerStageResources must: be at least the smallest of the following: + * the sum of the pname:maxPerStageDescriptorUniformBuffers, pname:maxPerStageDescriptorStorageBuffers, pname:maxPerStageDescriptorSampledImages, pname:maxPerStageDescriptorStorageImages, pname:maxPerStageDescriptorInputAttachments, pname:maxColorAttachments limits, or * 128. + It may: not be possible to reach this limit in every stage. 3:: See <> for the required: relationship to other limits. 4:: See <> for the required: relationship to other limits. 5:: The values pname:minInterpolationOffset and pname:maxInterpolationOffset describe the closed interval of supported interpolation offsets: [pname:minInterpolationOffset, pname:maxInterpolationOffset]. The ULP is determined by pname:subPixelInterpolationOffsetBits. If pname:subPixelInterpolationOffsetBits is 4, this provides increments of (1/2^4^) = 0.0625, and thus the range of supported interpolation offsets would be [eq]#[-0.5, 0.4375]#. 6:: The point size ULP is determined by pname:pointSizeGranularity. If the pname:pointSizeGranularity is 0.125, the range of supported point sizes must: be at least [1.0, 63.875]. 7:: The line width ULP is determined by pname:lineWidthGranularity. If the pname:lineWidthGranularity is 0.0625, the range of supported line widths must: be at least [1.0, 7.9375]. 8:: The ptext:maxDescriptorSet* limit is _n_ times the corresponding ptext:maxPerStageDescriptor* limit, where _n_ is the number of shader stages supported by the VkPhysicalDevice. If all shader stages are supported, _n_ = 6 (vertex, tessellation control, tessellation evaluation, geometry, fragment, compute). ifdef::VK_EXT_sample_locations[] [[features-limits-multisample]] == Additional Multisampling Capabilities [open,refpage='vkGetPhysicalDeviceMultisamplePropertiesEXT',desc='Report sample count specific multisampling capabilities of a physical device',type='protos'] -- In addition to the minimum capabilities described in the previous section (<>), implementations may: support additional multisampling capabilities specific to a particular sample count. To query additional sample count specific multisampling capabilities, call: include::../api/protos/vkGetPhysicalDeviceMultisamplePropertiesEXT.txt[] * pname:physicalDevice is the physical device from which to query the additional multisampling capabilities. * pname:samples is the sample count to query the capabilities for. * pname:pMultisampleProperties is a pointer to a structure of type slink:VkMultisamplePropertiesEXT, in which information about the additional multisampling capabilities specific to the sample count is returned. include::../validity/protos/vkGetPhysicalDeviceMultisamplePropertiesEXT.txt[] -- [open,refpage='VkMultisamplePropertiesEXT',desc='Structure returning information about sample count specific additional multisampling capabilities',type='structs'] -- The sname:VkMultisamplePropertiesEXT structure is defined as include::../api/structs/VkMultisamplePropertiesEXT.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:maxSampleLocationGridSize is the maximum size of the pixel grid in which sample locations can: vary. include::../validity/structs/VkMultisamplePropertiesEXT.txt[] -- If the sample count for which additional multisampling capabilities are requested using fname:vkGetPhysicalDeviceMultisamplePropertiesEXT is set in sname:VkPhysicalDeviceSampleLocationsEXT:: <> the pname:width and pname:height members of sname:VkMultisamplePropertiesEXT::pname:maxSampleLocationGridSize must: be greater than or equal to the corresponding members of sname:VkPhysicalDeviceSampleLocationsEXT:: <>, respectively, otherwise both members must: be `0`. endif::VK_EXT_sample_locations[] [[features-formats]] == Formats The features for the set of formats (elink:VkFormat) supported by the implementation are queried individually using the flink:vkGetPhysicalDeviceFormatProperties command. [[features-formats-definition]] === Format Definition [open,refpage='VkFormat',desc='Available image formats',type='enums'] -- Image formats which can: be passed to, and may: be returned from Vulkan commands, are: include::../api/enums/VkFormat.txt[] * ename:VK_FORMAT_UNDEFINED indicates that the format is not specified. * ename:VK_FORMAT_R4G4_UNORM_PACK8 specifies a two-component, 8-bit packed unsigned normalized format that has a 4-bit R component in bits 4..7, and a 4-bit G component in bits 0..3. * ename:VK_FORMAT_R4G4B4A4_UNORM_PACK16 specifies a four-component, 16-bit packed unsigned normalized format that has a 4-bit R component in bits 12..15, a 4-bit G component in bits 8..11, a 4-bit B component in bits 4..7, and a 4-bit A component in bits 0..3. * ename:VK_FORMAT_B4G4R4A4_UNORM_PACK16 specifies a four-component, 16-bit packed unsigned normalized format that has a 4-bit B component in bits 12..15, a 4-bit G component in bits 8..11, a 4-bit R component in bits 4..7, and a 4-bit A component in bits 0..3. * ename:VK_FORMAT_R5G6B5_UNORM_PACK16 specifies a three-component, 16-bit packed unsigned normalized format that has a 5-bit R component in bits 11..15, a 6-bit G component in bits 5..10, and a 5-bit B component in bits 0..4. * ename:VK_FORMAT_B5G6R5_UNORM_PACK16 specifies a three-component, 16-bit packed unsigned normalized format that has a 5-bit B component in bits 11..15, a 6-bit G component in bits 5..10, and a 5-bit R component in bits 0..4. * ename:VK_FORMAT_R5G5B5A1_UNORM_PACK16 specifies a four-component, 16-bit packed unsigned normalized format that has a 5-bit R component in bits 11..15, a 5-bit G component in bits 6..10, a 5-bit B component in bits 1..5, and a 1-bit A component in bit 0. * ename:VK_FORMAT_B5G5R5A1_UNORM_PACK16 specifies a four-component, 16-bit packed unsigned normalized format that has a 5-bit B component in bits 11..15, a 5-bit G component in bits 6..10, a 5-bit R component in bits 1..5, and a 1-bit A component in bit 0. * ename:VK_FORMAT_A1R5G5B5_UNORM_PACK16 specifies a four-component, 16-bit packed unsigned normalized format that has a 1-bit A component in bit 15, a 5-bit R component in bits 10..14, a 5-bit G component in bits 5..9, and a 5-bit B component in bits 0..4. * ename:VK_FORMAT_R8_UNORM specifies a one-component, 8-bit unsigned normalized format that has a single 8-bit R component. * ename:VK_FORMAT_R8_SNORM specifies a one-component, 8-bit signed normalized format that has a single 8-bit R component. * ename:VK_FORMAT_R8_USCALED specifies a one-component, 8-bit unsigned scaled integer format that has a single 8-bit R component. * ename:VK_FORMAT_R8_SSCALED specifies a one-component, 8-bit signed scaled integer format that has a single 8-bit R component. * ename:VK_FORMAT_R8_UINT specifies a one-component, 8-bit unsigned integer format that has a single 8-bit R component. * ename:VK_FORMAT_R8_SINT specifies a one-component, 8-bit signed integer format that has a single 8-bit R component. * ename:VK_FORMAT_R8_SRGB specifies a one-component, 8-bit unsigned normalized format that has a single 8-bit R component stored with sRGB nonlinear encoding. * ename:VK_FORMAT_R8G8_UNORM specifies a two-component, 16-bit unsigned normalized format that has an 8-bit R component in byte 0, and an 8-bit G component in byte 1. * ename:VK_FORMAT_R8G8_SNORM specifies a two-component, 16-bit signed normalized format that has an 8-bit R component in byte 0, and an 8-bit G component in byte 1. * ename:VK_FORMAT_R8G8_USCALED specifies a two-component, 16-bit unsigned scaled integer format that has an 8-bit R component in byte 0, and an 8-bit G component in byte 1. * ename:VK_FORMAT_R8G8_SSCALED specifies a two-component, 16-bit signed scaled integer format that has an 8-bit R component in byte 0, and an 8-bit G component in byte 1. * ename:VK_FORMAT_R8G8_UINT specifies a two-component, 16-bit unsigned integer format that has an 8-bit R component in byte 0, and an 8-bit G component in byte 1. * ename:VK_FORMAT_R8G8_SINT specifies a two-component, 16-bit signed integer format that has an 8-bit R component in byte 0, and an 8-bit G component in byte 1. * ename:VK_FORMAT_R8G8_SRGB specifies a two-component, 16-bit unsigned normalized format that has an 8-bit R component stored with sRGB nonlinear encoding in byte 0, and an 8-bit G component stored with sRGB nonlinear encoding in byte 1. * ename:VK_FORMAT_R8G8B8_UNORM specifies a three-component, 24-bit unsigned normalized format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, and an 8-bit B component in byte 2. * ename:VK_FORMAT_R8G8B8_SNORM specifies a three-component, 24-bit signed normalized format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, and an 8-bit B component in byte 2. * ename:VK_FORMAT_R8G8B8_USCALED specifies a three-component, 24-bit unsigned scaled format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, and an 8-bit B component in byte 2. * ename:VK_FORMAT_R8G8B8_SSCALED specifies a three-component, 24-bit signed scaled format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, and an 8-bit B component in byte 2. * ename:VK_FORMAT_R8G8B8_UINT specifies a three-component, 24-bit unsigned integer format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, and an 8-bit B component in byte 2. * ename:VK_FORMAT_R8G8B8_SINT specifies a three-component, 24-bit signed integer format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, and an 8-bit B component in byte 2. * ename:VK_FORMAT_R8G8B8_SRGB specifies a three-component, 24-bit unsigned normalized format that has an 8-bit R component stored with sRGB nonlinear encoding in byte 0, an 8-bit G component stored with sRGB nonlinear encoding in byte 1, and an 8-bit B component stored with sRGB nonlinear encoding in byte 2. * ename:VK_FORMAT_B8G8R8_UNORM specifies a three-component, 24-bit unsigned normalized format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, and an 8-bit R component in byte 2. * ename:VK_FORMAT_B8G8R8_SNORM specifies a three-component, 24-bit signed normalized format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, and an 8-bit R component in byte 2. * ename:VK_FORMAT_B8G8R8_USCALED specifies a three-component, 24-bit unsigned scaled format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, and an 8-bit R component in byte 2. * ename:VK_FORMAT_B8G8R8_SSCALED specifies a three-component, 24-bit signed scaled format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, and an 8-bit R component in byte 2. * ename:VK_FORMAT_B8G8R8_UINT specifies a three-component, 24-bit unsigned integer format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, and an 8-bit R component in byte 2. * ename:VK_FORMAT_B8G8R8_SINT specifies a three-component, 24-bit signed integer format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, and an 8-bit R component in byte 2. * ename:VK_FORMAT_B8G8R8_SRGB specifies a three-component, 24-bit unsigned normalized format that has an 8-bit B component stored with sRGB nonlinear encoding in byte 0, an 8-bit G component stored with sRGB nonlinear encoding in byte 1, and an 8-bit R component stored with sRGB nonlinear encoding in byte 2. * ename:VK_FORMAT_R8G8B8A8_UNORM specifies a four-component, 32-bit unsigned normalized format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, an 8-bit B component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_R8G8B8A8_SNORM specifies a four-component, 32-bit signed normalized format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, an 8-bit B component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_R8G8B8A8_USCALED specifies a four-component, 32-bit unsigned scaled format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, an 8-bit B component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_R8G8B8A8_SSCALED specifies a four-component, 32-bit signed scaled format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, an 8-bit B component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_R8G8B8A8_UINT specifies a four-component, 32-bit unsigned integer format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, an 8-bit B component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_R8G8B8A8_SINT specifies a four-component, 32-bit signed integer format that has an 8-bit R component in byte 0, an 8-bit G component in byte 1, an 8-bit B component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_R8G8B8A8_SRGB specifies a four-component, 32-bit unsigned normalized format that has an 8-bit R component stored with sRGB nonlinear encoding in byte 0, an 8-bit G component stored with sRGB nonlinear encoding in byte 1, an 8-bit B component stored with sRGB nonlinear encoding in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_B8G8R8A8_UNORM specifies a four-component, 32-bit unsigned normalized format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, an 8-bit R component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_B8G8R8A8_SNORM specifies a four-component, 32-bit signed normalized format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, an 8-bit R component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_B8G8R8A8_USCALED specifies a four-component, 32-bit unsigned scaled format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, an 8-bit R component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_B8G8R8A8_SSCALED specifies a four-component, 32-bit signed scaled format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, an 8-bit R component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_B8G8R8A8_UINT specifies a four-component, 32-bit unsigned integer format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, an 8-bit R component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_B8G8R8A8_SINT specifies a four-component, 32-bit signed integer format that has an 8-bit B component in byte 0, an 8-bit G component in byte 1, an 8-bit R component in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_B8G8R8A8_SRGB specifies a four-component, 32-bit unsigned normalized format that has an 8-bit B component stored with sRGB nonlinear encoding in byte 0, an 8-bit G component stored with sRGB nonlinear encoding in byte 1, an 8-bit R component stored with sRGB nonlinear encoding in byte 2, and an 8-bit A component in byte 3. * ename:VK_FORMAT_A8B8G8R8_UNORM_PACK32 specifies a four-component, 32-bit packed unsigned normalized format that has an 8-bit A component in bits 24..31, an 8-bit B component in bits 16..23, an 8-bit G component in bits 8..15, and an 8-bit R component in bits 0..7. * ename:VK_FORMAT_A8B8G8R8_SNORM_PACK32 specifies a four-component, 32-bit packed signed normalized format that has an 8-bit A component in bits 24..31, an 8-bit B component in bits 16..23, an 8-bit G component in bits 8..15, and an 8-bit R component in bits 0..7. * ename:VK_FORMAT_A8B8G8R8_USCALED_PACK32 specifies a four-component, 32-bit packed unsigned scaled integer format that has an 8-bit A component in bits 24..31, an 8-bit B component in bits 16..23, an 8-bit G component in bits 8..15, and an 8-bit R component in bits 0..7. * ename:VK_FORMAT_A8B8G8R8_SSCALED_PACK32 specifies a four-component, 32-bit packed signed scaled integer format that has an 8-bit A component in bits 24..31, an 8-bit B component in bits 16..23, an 8-bit G component in bits 8..15, and an 8-bit R component in bits 0..7. * ename:VK_FORMAT_A8B8G8R8_UINT_PACK32 specifies a four-component, 32-bit packed unsigned integer format that has an 8-bit A component in bits 24..31, an 8-bit B component in bits 16..23, an 8-bit G component in bits 8..15, and an 8-bit R component in bits 0..7. * ename:VK_FORMAT_A8B8G8R8_SINT_PACK32 specifies a four-component, 32-bit packed signed integer format that has an 8-bit A component in bits 24..31, an 8-bit B component in bits 16..23, an 8-bit G component in bits 8..15, and an 8-bit R component in bits 0..7. * ename:VK_FORMAT_A8B8G8R8_SRGB_PACK32 specifies a four-component, 32-bit packed unsigned normalized format that has an 8-bit A component in bits 24..31, an 8-bit B component stored with sRGB nonlinear encoding in bits 16..23, an 8-bit G component stored with sRGB nonlinear encoding in bits 8..15, and an 8-bit R component stored with sRGB nonlinear encoding in bits 0..7. * ename:VK_FORMAT_A2R10G10B10_UNORM_PACK32 specifies a four-component, 32-bit packed unsigned normalized format that has a 2-bit A component in bits 30..31, a 10-bit R component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit B component in bits 0..9. * ename:VK_FORMAT_A2R10G10B10_SNORM_PACK32 specifies a four-component, 32-bit packed signed normalized format that has a 2-bit A component in bits 30..31, a 10-bit R component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit B component in bits 0..9. * ename:VK_FORMAT_A2R10G10B10_USCALED_PACK32 specifies a four-component, 32-bit packed unsigned scaled integer format that has a 2-bit A component in bits 30..31, a 10-bit R component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit B component in bits 0..9. * ename:VK_FORMAT_A2R10G10B10_SSCALED_PACK32 specifies a four-component, 32-bit packed signed scaled integer format that has a 2-bit A component in bits 30..31, a 10-bit R component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit B component in bits 0..9. * ename:VK_FORMAT_A2R10G10B10_UINT_PACK32 specifies a four-component, 32-bit packed unsigned integer format that has a 2-bit A component in bits 30..31, a 10-bit R component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit B component in bits 0..9. * ename:VK_FORMAT_A2R10G10B10_SINT_PACK32 specifies a four-component, 32-bit packed signed integer format that has a 2-bit A component in bits 30..31, a 10-bit R component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit B component in bits 0..9. * ename:VK_FORMAT_A2B10G10R10_UNORM_PACK32 specifies a four-component, 32-bit packed unsigned normalized format that has a 2-bit A component in bits 30..31, a 10-bit B component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit R component in bits 0..9. * ename:VK_FORMAT_A2B10G10R10_SNORM_PACK32 specifies a four-component, 32-bit packed signed normalized format that has a 2-bit A component in bits 30..31, a 10-bit B component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit R component in bits 0..9. * ename:VK_FORMAT_A2B10G10R10_USCALED_PACK32 specifies a four-component, 32-bit packed unsigned scaled integer format that has a 2-bit A component in bits 30..31, a 10-bit B component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit R component in bits 0..9. * ename:VK_FORMAT_A2B10G10R10_SSCALED_PACK32 specifies a four-component, 32-bit packed signed scaled integer format that has a 2-bit A component in bits 30..31, a 10-bit B component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit R component in bits 0..9. * ename:VK_FORMAT_A2B10G10R10_UINT_PACK32 specifies a four-component, 32-bit packed unsigned integer format that has a 2-bit A component in bits 30..31, a 10-bit B component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit R component in bits 0..9. * ename:VK_FORMAT_A2B10G10R10_SINT_PACK32 specifies a four-component, 32-bit packed signed integer format that has a 2-bit A component in bits 30..31, a 10-bit B component in bits 20..29, a 10-bit G component in bits 10..19, and a 10-bit R component in bits 0..9. * ename:VK_FORMAT_R16_UNORM specifies a one-component, 16-bit unsigned normalized format that has a single 16-bit R component. * ename:VK_FORMAT_R16_SNORM specifies a one-component, 16-bit signed normalized format that has a single 16-bit R component. * ename:VK_FORMAT_R16_USCALED specifies a one-component, 16-bit unsigned scaled integer format that has a single 16-bit R component. * ename:VK_FORMAT_R16_SSCALED specifies a one-component, 16-bit signed scaled integer format that has a single 16-bit R component. * ename:VK_FORMAT_R16_UINT specifies a one-component, 16-bit unsigned integer format that has a single 16-bit R component. * ename:VK_FORMAT_R16_SINT specifies a one-component, 16-bit signed integer format that has a single 16-bit R component. * ename:VK_FORMAT_R16_SFLOAT specifies a one-component, 16-bit signed floating-point format that has a single 16-bit R component. * ename:VK_FORMAT_R16G16_UNORM specifies a two-component, 32-bit unsigned normalized format that has a 16-bit R component in bytes 0..1, and a 16-bit G component in bytes 2..3. * ename:VK_FORMAT_R16G16_SNORM specifies a two-component, 32-bit signed normalized format that has a 16-bit R component in bytes 0..1, and a 16-bit G component in bytes 2..3. * ename:VK_FORMAT_R16G16_USCALED specifies a two-component, 32-bit unsigned scaled integer format that has a 16-bit R component in bytes 0..1, and a 16-bit G component in bytes 2..3. * ename:VK_FORMAT_R16G16_SSCALED specifies a two-component, 32-bit signed scaled integer format that has a 16-bit R component in bytes 0..1, and a 16-bit G component in bytes 2..3. * ename:VK_FORMAT_R16G16_UINT specifies a two-component, 32-bit unsigned integer format that has a 16-bit R component in bytes 0..1, and a 16-bit G component in bytes 2..3. * ename:VK_FORMAT_R16G16_SINT specifies a two-component, 32-bit signed integer format that has a 16-bit R component in bytes 0..1, and a 16-bit G component in bytes 2..3. * ename:VK_FORMAT_R16G16_SFLOAT specifies a two-component, 32-bit signed floating-point format that has a 16-bit R component in bytes 0..1, and a 16-bit G component in bytes 2..3. * ename:VK_FORMAT_R16G16B16_UNORM specifies a three-component, 48-bit unsigned normalized format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, and a 16-bit B component in bytes 4..5. * ename:VK_FORMAT_R16G16B16_SNORM specifies a three-component, 48-bit signed normalized format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, and a 16-bit B component in bytes 4..5. * ename:VK_FORMAT_R16G16B16_USCALED specifies a three-component, 48-bit unsigned scaled integer format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, and a 16-bit B component in bytes 4..5. * ename:VK_FORMAT_R16G16B16_SSCALED specifies a three-component, 48-bit signed scaled integer format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, and a 16-bit B component in bytes 4..5. * ename:VK_FORMAT_R16G16B16_UINT specifies a three-component, 48-bit unsigned integer format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, and a 16-bit B component in bytes 4..5. * ename:VK_FORMAT_R16G16B16_SINT specifies a three-component, 48-bit signed integer format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, and a 16-bit B component in bytes 4..5. * ename:VK_FORMAT_R16G16B16_SFLOAT specifies a three-component, 48-bit signed floating-point format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, and a 16-bit B component in bytes 4..5. * ename:VK_FORMAT_R16G16B16A16_UNORM specifies a four-component, 64-bit unsigned normalized format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, a 16-bit B component in bytes 4..5, and a 16-bit A component in bytes 6..7. * ename:VK_FORMAT_R16G16B16A16_SNORM specifies a four-component, 64-bit signed normalized format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, a 16-bit B component in bytes 4..5, and a 16-bit A component in bytes 6..7. * ename:VK_FORMAT_R16G16B16A16_USCALED specifies a four-component, 64-bit unsigned scaled integer format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, a 16-bit B component in bytes 4..5, and a 16-bit A component in bytes 6..7. * ename:VK_FORMAT_R16G16B16A16_SSCALED specifies a four-component, 64-bit signed scaled integer format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, a 16-bit B component in bytes 4..5, and a 16-bit A component in bytes 6..7. * ename:VK_FORMAT_R16G16B16A16_UINT specifies a four-component, 64-bit unsigned integer format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, a 16-bit B component in bytes 4..5, and a 16-bit A component in bytes 6..7. * ename:VK_FORMAT_R16G16B16A16_SINT specifies a four-component, 64-bit signed integer format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, a 16-bit B component in bytes 4..5, and a 16-bit A component in bytes 6..7. * ename:VK_FORMAT_R16G16B16A16_SFLOAT specifies a four-component, 64-bit signed floating-point format that has a 16-bit R component in bytes 0..1, a 16-bit G component in bytes 2..3, a 16-bit B component in bytes 4..5, and a 16-bit A component in bytes 6..7. * ename:VK_FORMAT_R32_UINT specifies a one-component, 32-bit unsigned integer format that has a single 32-bit R component. * ename:VK_FORMAT_R32_SINT specifies a one-component, 32-bit signed integer format that has a single 32-bit R component. * ename:VK_FORMAT_R32_SFLOAT specifies a one-component, 32-bit signed floating-point format that has a single 32-bit R component. * ename:VK_FORMAT_R32G32_UINT specifies a two-component, 64-bit unsigned integer format that has a 32-bit R component in bytes 0..3, and a 32-bit G component in bytes 4..7. * ename:VK_FORMAT_R32G32_SINT specifies a two-component, 64-bit signed integer format that has a 32-bit R component in bytes 0..3, and a 32-bit G component in bytes 4..7. * ename:VK_FORMAT_R32G32_SFLOAT specifies a two-component, 64-bit signed floating-point format that has a 32-bit R component in bytes 0..3, and a 32-bit G component in bytes 4..7. * ename:VK_FORMAT_R32G32B32_UINT specifies a three-component, 96-bit unsigned integer format that has a 32-bit R component in bytes 0..3, a 32-bit G component in bytes 4..7, and a 32-bit B component in bytes 8..11. * ename:VK_FORMAT_R32G32B32_SINT specifies a three-component, 96-bit signed integer format that has a 32-bit R component in bytes 0..3, a 32-bit G component in bytes 4..7, and a 32-bit B component in bytes 8..11. * ename:VK_FORMAT_R32G32B32_SFLOAT specifies a three-component, 96-bit signed floating-point format that has a 32-bit R component in bytes 0..3, a 32-bit G component in bytes 4..7, and a 32-bit B component in bytes 8..11. * ename:VK_FORMAT_R32G32B32A32_UINT specifies a four-component, 128-bit unsigned integer format that has a 32-bit R component in bytes 0..3, a 32-bit G component in bytes 4..7, a 32-bit B component in bytes 8..11, and a 32-bit A component in bytes 12..15. * ename:VK_FORMAT_R32G32B32A32_SINT specifies a four-component, 128-bit signed integer format that has a 32-bit R component in bytes 0..3, a 32-bit G component in bytes 4..7, a 32-bit B component in bytes 8..11, and a 32-bit A component in bytes 12..15. * ename:VK_FORMAT_R32G32B32A32_SFLOAT specifies a four-component, 128-bit signed floating-point format that has a 32-bit R component in bytes 0..3, a 32-bit G component in bytes 4..7, a 32-bit B component in bytes 8..11, and a 32-bit A component in bytes 12..15. * ename:VK_FORMAT_R64_UINT specifies a one-component, 64-bit unsigned integer format that has a single 64-bit R component. * ename:VK_FORMAT_R64_SINT specifies a one-component, 64-bit signed integer format that has a single 64-bit R component. * ename:VK_FORMAT_R64_SFLOAT specifies a one-component, 64-bit signed floating-point format that has a single 64-bit R component. * ename:VK_FORMAT_R64G64_UINT specifies a two-component, 128-bit unsigned integer format that has a 64-bit R component in bytes 0..7, and a 64-bit G component in bytes 8..15. * ename:VK_FORMAT_R64G64_SINT specifies a two-component, 128-bit signed integer format that has a 64-bit R component in bytes 0..7, and a 64-bit G component in bytes 8..15. * ename:VK_FORMAT_R64G64_SFLOAT specifies a two-component, 128-bit signed floating-point format that has a 64-bit R component in bytes 0..7, and a 64-bit G component in bytes 8..15. * ename:VK_FORMAT_R64G64B64_UINT specifies a three-component, 192-bit unsigned integer format that has a 64-bit R component in bytes 0..7, a 64-bit G component in bytes 8..15, and a 64-bit B component in bytes 16..23. * ename:VK_FORMAT_R64G64B64_SINT specifies a three-component, 192-bit signed integer format that has a 64-bit R component in bytes 0..7, a 64-bit G component in bytes 8..15, and a 64-bit B component in bytes 16..23. * ename:VK_FORMAT_R64G64B64_SFLOAT specifies a three-component, 192-bit signed floating-point format that has a 64-bit R component in bytes 0..7, a 64-bit G component in bytes 8..15, and a 64-bit B component in bytes 16..23. * ename:VK_FORMAT_R64G64B64A64_UINT specifies a four-component, 256-bit unsigned integer format that has a 64-bit R component in bytes 0..7, a 64-bit G component in bytes 8..15, a 64-bit B component in bytes 16..23, and a 64-bit A component in bytes 24..31. * ename:VK_FORMAT_R64G64B64A64_SINT specifies a four-component, 256-bit signed integer format that has a 64-bit R component in bytes 0..7, a 64-bit G component in bytes 8..15, a 64-bit B component in bytes 16..23, and a 64-bit A component in bytes 24..31. * ename:VK_FORMAT_R64G64B64A64_SFLOAT specifies a four-component, 256-bit signed floating-point format that has a 64-bit R component in bytes 0..7, a 64-bit G component in bytes 8..15, a 64-bit B component in bytes 16..23, and a 64-bit A component in bytes 24..31. * ename:VK_FORMAT_B10G11R11_UFLOAT_PACK32 specifies a three-component, 32-bit packed unsigned floating-point format that has a 10-bit B component in bits 22..31, an 11-bit G component in bits 11..21, an 11-bit R component in bits 0..10. See <> and <>. * ename:VK_FORMAT_E5B9G9R9_UFLOAT_PACK32 specifies a three-component, 32-bit packed unsigned floating-point format that has a 5-bit shared exponent in bits 27..31, a 9-bit B component mantissa in bits 18..26, a 9-bit G component mantissa in bits 9..17, and a 9-bit R component mantissa in bits 0..8. * ename:VK_FORMAT_D16_UNORM specifies a one-component, 16-bit unsigned normalized format that has a single 16-bit depth component. * ename:VK_FORMAT_X8_D24_UNORM_PACK32 specifies a two-component, 32-bit format that has 24 unsigned normalized bits in the depth component and, optionally:, 8 bits that are unused. * ename:VK_FORMAT_D32_SFLOAT specifies a one-component, 32-bit signed floating-point format that has 32-bits in the depth component. * ename:VK_FORMAT_S8_UINT specifies a one-component, 8-bit unsigned integer format that has 8-bits in the stencil component. * ename:VK_FORMAT_D16_UNORM_S8_UINT specifies a two-component, 24-bit format that has 16 unsigned normalized bits in the depth component and 8 unsigned integer bits in the stencil component. * ename:VK_FORMAT_D24_UNORM_S8_UINT specifies a two-component, 32-bit packed format that has 8 unsigned integer bits in the stencil component, and 24 unsigned normalized bits in the depth component. * ename:VK_FORMAT_D32_SFLOAT_S8_UINT specifies a two-component format that has 32 signed float bits in the depth component and 8 unsigned integer bits in the stencil component. There are optionally: 24-bits that are unused. * ename:VK_FORMAT_BC1_RGB_UNORM_BLOCK specifies a three-component, block-compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGB texel data. This format has no alpha and is considered opaque. * ename:VK_FORMAT_BC1_RGB_SRGB_BLOCK specifies a three-component, block-compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGB texel data with sRGB nonlinear encoding. This format has no alpha and is considered opaque. * ename:VK_FORMAT_BC1_RGBA_UNORM_BLOCK specifies a four-component, block-compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGB texel data, and provides 1 bit of alpha. * ename:VK_FORMAT_BC1_RGBA_SRGB_BLOCK specifies a four-component, block-compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGB texel data with sRGB nonlinear encoding, and provides 1 bit of alpha. * ename:VK_FORMAT_BC2_UNORM_BLOCK specifies a four-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data with the first 64 bits encoding alpha values followed by 64 bits encoding RGB values. * ename:VK_FORMAT_BC2_SRGB_BLOCK specifies a four-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data with the first 64 bits encoding alpha values followed by 64 bits encoding RGB values with sRGB nonlinear encoding. * ename:VK_FORMAT_BC3_UNORM_BLOCK specifies a four-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data with the first 64 bits encoding alpha values followed by 64 bits encoding RGB values. * ename:VK_FORMAT_BC3_SRGB_BLOCK specifies a four-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data with the first 64 bits encoding alpha values followed by 64 bits encoding RGB values with sRGB nonlinear encoding. * ename:VK_FORMAT_BC4_UNORM_BLOCK specifies a one-component, block-compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized red texel data. * ename:VK_FORMAT_BC4_SNORM_BLOCK specifies a one-component, block-compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of signed normalized red texel data. * ename:VK_FORMAT_BC5_UNORM_BLOCK specifies a two-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RG texel data with the first 64 bits encoding red values followed by 64 bits encoding green values. * ename:VK_FORMAT_BC5_SNORM_BLOCK specifies a two-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of signed normalized RG texel data with the first 64 bits encoding red values followed by 64 bits encoding green values. * ename:VK_FORMAT_BC6H_UFLOAT_BLOCK specifies a three-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned floating-point RGB texel data. * ename:VK_FORMAT_BC6H_SFLOAT_BLOCK specifies a three-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of signed floating-point RGB texel data. * ename:VK_FORMAT_BC7_UNORM_BLOCK specifies a four-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_BC7_SRGB_BLOCK specifies a four-component, block-compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ETC2_R8G8B8_UNORM_BLOCK specifies a three-component, ETC2 compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGB texel data. This format has no alpha and is considered opaque. * ename:VK_FORMAT_ETC2_R8G8B8_SRGB_BLOCK specifies a three-component, ETC2 compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGB texel data with sRGB nonlinear encoding. This format has no alpha and is considered opaque. * ename:VK_FORMAT_ETC2_R8G8B8A1_UNORM_BLOCK specifies a four-component, ETC2 compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGB texel data, and provides 1 bit of alpha. * ename:VK_FORMAT_ETC2_R8G8B8A1_SRGB_BLOCK specifies a four-component, ETC2 compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGB texel data with sRGB nonlinear encoding, and provides 1 bit of alpha. * ename:VK_FORMAT_ETC2_R8G8B8A8_UNORM_BLOCK specifies a four-component, ETC2 compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data with the first 64 bits encoding alpha values followed by 64 bits encoding RGB values. * ename:VK_FORMAT_ETC2_R8G8B8A8_SRGB_BLOCK specifies a four-component, ETC2 compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data with the first 64 bits encoding alpha values followed by 64 bits encoding RGB values with sRGB nonlinear encoding applied. * ename:VK_FORMAT_EAC_R11_UNORM_BLOCK specifies a one-component, ETC2 compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized red texel data. * ename:VK_FORMAT_EAC_R11_SNORM_BLOCK specifies a one-component, ETC2 compressed format where each 64-bit compressed texel block encodes a 4{times}4 rectangle of signed normalized red texel data. * ename:VK_FORMAT_EAC_R11G11_UNORM_BLOCK specifies a two-component, ETC2 compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RG texel data with the first 64 bits encoding red values followed by 64 bits encoding green values. * ename:VK_FORMAT_EAC_R11G11_SNORM_BLOCK specifies a two-component, ETC2 compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of signed normalized RG texel data with the first 64 bits encoding red values followed by 64 bits encoding green values. * ename:VK_FORMAT_ASTC_4x4_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_4x4_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 4{times}4 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_5x4_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 5{times}4 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_5x4_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 5{times}4 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_5x5_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 5{times}5 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_5x5_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 5{times}5 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_6x5_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 6{times}5 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_6x5_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 6{times}5 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_6x6_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 6{times}6 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_6x6_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 6{times}6 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_8x5_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes an 8{times}5 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_8x5_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes an 8{times}5 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_8x6_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes an 8{times}6 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_8x6_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes an 8{times}6 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_8x8_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes an 8{times}8 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_8x8_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes an 8{times}8 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_10x5_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 10{times}5 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_10x5_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 10{times}5 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_10x6_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 10{times}6 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_10x6_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 10{times}6 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_10x8_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 10{times}8 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_10x8_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 10{times}8 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_10x10_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 10{times}10 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_10x10_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 10{times}10 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_12x10_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 12{times}10 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_12x10_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 12{times}10 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. * ename:VK_FORMAT_ASTC_12x12_UNORM_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 12{times}12 rectangle of unsigned normalized RGBA texel data. * ename:VK_FORMAT_ASTC_12x12_SRGB_BLOCK specifies a four-component, ASTC compressed format where each 128-bit compressed texel block encodes a 12{times}12 rectangle of unsigned normalized RGBA texel data with sRGB nonlinear encoding applied to the RGB components. ifdef::VK_KHR_sampler_ycbcr_conversion[] * ename:VK_FORMAT_G8B8G8R8_422_UNORM_KHR specifies a four-component, 32-bit format containing a pair of G components, an R component, and a B component, collectively encoding a 2{times}1 rectangle of unsigned normalized RGB texel data. One G value is present at each _i_ coordinate, with the B and R values shared across both G values and thus recorded at half the horizontal resolution of the image. This format has an 8-bit G component for the even _i_ coordinate in byte 0, an 8-bit B component in byte 1, an 8-bit G component for the odd _i_ coordinate in byte 2, and an 8-bit R component in byte 3. Images in this format must: be defined with a width that is a multiple of two. For the purposes of the constraints on copy extents, this format is treated as a compressed format with a 2{times}1 compressed texel block. * ename:VK_FORMAT_B8G8R8G8_422_UNORM_KHR specifies a four-component, 32-bit format containing a pair of G components, an R component, and a B component, collectively encoding a 2{times}1 rectangle of unsigned normalized RGB texel data. One G value is present at each _i_ coordinate, with the B and R values shared across both G values and thus recorded at half the horizontal resolution of the image. This format has an 8-bit B component in byte 0, an 8-bit G component for the even _i_ coordinate in byte 1, an 8-bit R component in byte 2, and an 8-bit G component for the odd _i_ coordinate in byte 3. Images in this format must: be defined with a width that is a multiple of two. For the purposes of the constraints on copy extents, this format is treated as a compressed format with a 2{times}1 compressed texel block. * ename:VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has an 8-bit G component in plane 0, an 8-bit B component in plane 1, and an 8-bit R component in plane 2. The horizontal and vertical dimensions of the R and B planes are halved relative to the image dimensions, and each R and B component is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R] and latexmath:[\lfloor j_G \times 0.5 \rfloor = j_B = j_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. Images in this format must: be defined with a width and height that is a multiple of two. * ename:VK_FORMAT_G8_B8R8_2PLANE_420_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has an 8-bit G component in plane 0, and a two-component, 16-bit BR plane 1 consisting of an 8-bit B component in byte 0 and an 8-bit R component in byte 1. The horizontal and vertical dimensions of the BR plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R] and latexmath:[\lfloor j_G \times 0.5 \rfloor = j_B = j_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, and ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the BR plane. Images in this format must: be defined with a width and height that is a multiple of two. * ename:VK_FORMAT_G8_B8_R8_3PLANE_422_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has an 8-bit G component in plane 0, an 8-bit B component in plane 1, and an 8-bit R component in plane 2. The horizontal dimension of the R and B plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. Images in this format must: be defined with a width that is a multiple of two. * ename:VK_FORMAT_G8_B8R8_2PLANE_422_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has an 8-bit G component in plane 0, and a two-component, 16-bit BR plane 1 consisting of an 8-bit B component in byte 0 and an 8-bit R component in byte 1. The horizontal dimensions of the BR plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, and ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the BR plane. Images in this format must: be defined with a width that is a multiple of two. * ename:VK_FORMAT_G8_B8_R8_3PLANE_444_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has an 8-bit G component in plane 0, an 8-bit B component in plane 1, and an 8-bit R component in plane 2. Each plane has the same dimensions and each R, G and B component contributes to a single texel. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. * ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR specifies a one-component, 16-bit unsigned normalized format that has a single 10-bit R component in the top 10 bits of a 16-bit word, with the bottom 6 bits set to 0. * ename:VK_FORMAT_R10X6G10X6_UNORM_2PACK16_KHR specifies a two-component, 32-bit unsigned normalized format that has a 10-bit R component in the top 10 bits of the word in bytes 0..1, and a 10-bit G component in the top 10 bits of the word in bytes 2..3, with the bottom 6 bits of each word set to 0. * ename:VK_FORMAT_R10X6G10X6B10X6A10X6_UNORM_4PACK16_KHR specifies a four-component, 64-bit unsigned normalized format that has a 10-bit R component in the top 10 bits of the word in bytes 0..1, a 10-bit G component in the top 10 bits of the word in bytes 2..3, a 10-bit B component in the top 10 bits of the word in bytes 4..5, and a 10-bit A component in the top 10 bits of the word in bytes 6..7, with the bottom 6 bits of each word set to 0. * ename:VK_FORMAT_G10X6B10X6G10X6R10X6_422_UNORM_4PACK16_KHR specifies a four-component, 64-bit format containing a pair of G components, an R component, and a B component, collectively encoding a 2{times}1 rectangle of unsigned normalized RGB texel data. One G value is present at each _i_ coordinate, with the B and R values shared across both G values and thus recorded at half the horizontal resolution of the image. This format has a 10-bit G component for the even _i_ coordinate in the top 10 bits of the word in bytes 0..1, a 10-bit B component in the top 10 bits of the word in bytes 2..3, a 10-bit G component for the odd _i_ coordinate in the top 10 bits of the word in bytes 4..5, and a 10-bit R component in the top 10 bits of the word in bytes 6..7, with the bottom 6 bits of each word set to 0. Images in this format must: be defined with a width that is a multiple of two. For the purposes of the constraints on copy extents, this format is treated as a compressed format with a 2{times}1 compressed texel block. * ename:VK_FORMAT_B10X6G10X6R10X6G10X6_422_UNORM_4PACK16_KHR specifies a four-component, 64-bit format containing a pair of G components, an R component, and a B component, collectively encoding a 2{times}1 rectangle of unsigned normalized RGB texel data. One G value is present at each _i_ coordinate, with the B and R values shared across both G values and thus recorded at half the horizontal resolution of the image. This format has a 10-bit B component in the top 10 bits of the word in bytes 0..1, a 10-bit G component for the even _i_ coordinate in the top 10 bits of the word in bytes 2..3, a 10-bit R component in the top 10 bits of the word in bytes 4..5, and a 10-bit G component for the odd _i_ coordinate in the top 10 bits of the word in bytes 6..7, with the bottom 6 bits of each word set to 0. Images in this format must: be defined with a width that is a multiple of two. For the purposes of the constraints on copy extents, this format is treated as a compressed format with a 2{times}1 compressed texel block. * ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_420_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 10-bit G component in the top 10 bits of each 16-bit word of plane 0, a 10-bit B component in the top 10 bits of each 16-bit word of plane 1, and a 10-bit R component in the top 10 bits of each 16-bit word of plane 2, with the bottom 6 bits of each word set to 0. The horizontal and vertical dimensions of the R and B planes are halved relative to the image dimensions, and each R and B component is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R] and latexmath:[\lfloor j_G \times 0.5 \rfloor = j_B = j_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. Images in this format must: be defined with a width and height that is a multiple of two. * ename:VK_FORMAT_G10X6_B10X6R10X6_2PLANE_420_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 10-bit G component in the top 10 bits of each 16-bit word of plane 0, and a two-component, 32-bit BR plane 1 consisting of a 10-bit B component in the top 10 bits of the word in bytes 0..1, and a 10-bit R component in the top 10 bits of the word in bytes 2..3, the bottom 6 bits of each word set to 0. The horizontal and vertical dimensions of the BR plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R] and latexmath:[\lfloor j_G \times 0.5 \rfloor = j_B = j_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, and ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the BR plane. Images in this format must: be defined with a width and height that is a multiple of two. * ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_422_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 10-bit G component in the top 10 bits of each 16-bit word of plane 0, a 10-bit B component in the top 10 bits of each 16-bit word of plane 1, and a 10-bit R component in the top 10 bits of each 16-bit word of plane 2, with the bottom 6 bits of each word set to 0. The horizontal dimension of the R and B plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. Images in this format must: be defined with a width that is a multiple of two. * ename:VK_FORMAT_G10X6_B10X6R10X6_2PLANE_422_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 10-bit G component in the top 10 bits of each 16-bit word of plane 0, and a two-component, 32-bit BR plane 1 consisting of a 10-bit B component in the top 10 bits of the word in bytes 0..1, and a 10-bit R component in the top 10 bits of the word in bytes 2..3, the bottom 6 bits of each word set to 0. The horizontal dimensions of the BR plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, and ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the BR plane. Images in this format must: be defined with a width that is a multiple of two. * ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_444_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 10-bit G component in the top 10 bits of each 16-bit word of plane 0, a 10-bit B component in the top 10 bits of each 16-bit word of plane 1, and a 10-bit R component in the top 10 bits of each 16-bit word of plane 2, with the bottom 6 bits of each word set to 0. Each plane has the same dimensions and each R, G and B component contributes to a single texel. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. * ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR specifies a one-component, 16-bit unsigned normalized format that has a single 12-bit R component in the top 12 bits of a 16-bit word, with the bottom 4 bits set to 0. * ename:VK_FORMAT_R12X4G12X4_UNORM_2PACK16_KHR specifies a two-component, 32-bit unsigned normalized format that has a 12-bit R component in the top 12 bits of the word in bytes 0..1, and a 12-bit G component in the top 12 bits of the word in bytes 2..3, with the bottom 4 bits of each word set to 0. * ename:VK_FORMAT_R12X4G12X4B12X4A12X4_UNORM_4PACK16_KHR specifies a four-component, 64-bit unsigned normalized format that has a 12-bit R component in the top 12 bits of the word in bytes 0..1, a 12-bit G component in the top 12 bits of the word in bytes 2..3, a 12-bit B component in the top 12 bits of the word in bytes 4..5, and a 12-bit A component in the top 12 bits of the word in bytes 6..7, with the bottom 4 bits of each word set to 0. * ename:VK_FORMAT_G12X4B12X4G12X4R12X4_422_UNORM_4PACK16_KHR specifies a four-component, 64-bit format containing a pair of G components, an R component, and a B component, collectively encoding a 2{times}1 rectangle of unsigned normalized RGB texel data. One G value is present at each _i_ coordinate, with the B and R values shared across both G values and thus recorded at half the horizontal resolution of the image. This format has a 12-bit G component for the even _i_ coordinate in the top 12 bits of the word in bytes 0..1, a 12-bit B component in the top 12 bits of the word in bytes 2..3, a 12-bit G component for the odd _i_ coordinate in the top 12 bits of the word in bytes 4..5, and a 12-bit R component in the top 12 bits of the word in bytes 6..7, with the bottom 4 bits of each word set to 0. Images in this format must: be defined with a width that is a multiple of two. For the purposes of the constraints on copy extents, this format is treated as a compressed format with a 2{times}1 compressed texel block. * ename:VK_FORMAT_B12X4G12X4R12X4G12X4_422_UNORM_4PACK16_KHR specifies a four-component, 64-bit format containing a pair of G components, an R component, and a B component, collectively encoding a 2{times}1 rectangle of unsigned normalized RGB texel data. One G value is present at each _i_ coordinate, with the B and R values shared across both G values and thus recorded at half the horizontal resolution of the image. This format has a 12-bit B component in the top 12 bits of the word in bytes 0..1, a 12-bit G component for the even _i_ coordinate in the top 12 bits of the word in bytes 2..3, a 12-bit R component in the top 12 bits of the word in bytes 4..5, and a 12-bit G component for the odd _i_ coordinate in the top 12 bits of the word in bytes 6..7, with the bottom 4 bits of each word set to 0. Images in this format must: be defined with a width that is a multiple of two. For the purposes of the constraints on copy extents, this format is treated as a compressed format with a 2{times}1 compressed texel block. * ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_420_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 12-bit G component in the top 12 bits of each 16-bit word of plane 0, a 12-bit B component in the top 12 bits of each 16-bit word of plane 1, and a 12-bit R component in the top 12 bits of each 16-bit word of plane 2, with the bottom 4 bits of each word set to 0. The horizontal and vertical dimensions of the R and B planes are halved relative to the image dimensions, and each R and B component is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R] and latexmath:[\lfloor j_G \times 0.5 \rfloor = j_B = j_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. Images in this format must: be defined with a width and height that is a multiple of two. * ename:VK_FORMAT_G12X4_B12X4R12X4_2PLANE_420_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 12-bit G component in the top 12 bits of each 16-bit word of plane 0, and a two-component, 32-bit BR plane 1 consisting of a 12-bit B component in the top 12 bits of the word in bytes 0..1, and a 12-bit R component in the top 12 bits of the word in bytes 2..3, the bottom 4 bits of each word set to 0. The horizontal and vertical dimensions of the BR plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R] and latexmath:[\lfloor j_G \times 0.5 \rfloor = j_B = j_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, and ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the BR plane. Images in this format must: be defined with a width and height that is a multiple of two. * ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_422_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 12-bit G component in the top 12 bits of each 16-bit word of plane 0, a 12-bit B component in the top 12 bits of each 16-bit word of plane 1, and a 12-bit R component in the top 12 bits of each 16-bit word of plane 2, with the bottom 4 bits of each word set to 0. The horizontal dimension of the R and B plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. Images in this format must: be defined with a width that is a multiple of two. * ename:VK_FORMAT_G12X4_B12X4R12X4_2PLANE_422_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 12-bit G component in the top 12 bits of each 16-bit word of plane 0, and a two-component, 32-bit BR plane 1 consisting of a 12-bit B component in the top 12 bits of the word in bytes 0..1, and a 12-bit R component in the top 12 bits of the word in bytes 2..3, the bottom 4 bits of each word set to 0. The horizontal dimensions of the BR plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, and ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the BR plane. Images in this format must: be defined with a width that is a multiple of two. * ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_444_UNORM_3PACK16_KHR specifies a unsigned normalized _multi-planar format_ that has a 12-bit G component in the top 12 bits of each 16-bit word of plane 0, a 12-bit B component in the top 12 bits of each 16-bit word of plane 1, and a 12-bit R component in the top 12 bits of each 16-bit word of plane 2, with the bottom 4 bits of each word set to 0. Each plane has the same dimensions and each R, G and B component contributes to a single texel. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. * ename:VK_FORMAT_G16B16G16R16_422_UNORM_KHR specifies a four-component, 64-bit format containing a pair of G components, an R component, and a B component, collectively encoding a 2{times}1 rectangle of unsigned normalized RGB texel data. One G value is present at each _i_ coordinate, with the B and R values shared across both G values and thus recorded at half the horizontal resolution of the image. This format has a 16-bit G component for the even _i_ coordinate in the word in bytes 0..1, a 16-bit B component in the word in bytes 2..3, a 16-bit G component for the odd _i_ coordinate in the word in bytes 4..5, and a 16-bit R component in the word in bytes 6..7. Images in this format must: be defined with a width that is a multiple of two. For the purposes of the constraints on copy extents, this format is treated as a compressed format with a 2{times}1 compressed texel block. * ename:VK_FORMAT_B16G16R16G16_422_UNORM_KHR specifies a four-component, 64-bit format containing a pair of G components, an R component, and a B component, collectively encoding a 2{times}1 rectangle of unsigned normalized RGB texel data. One G value is present at each _i_ coordinate, with the B and R values shared across both G values and thus recorded at half the horizontal resolution of the image. This format has a 16-bit B component in the word in bytes 0..1, a 16-bit G component for the even _i_ coordinate in the word in bytes 2..3, a 16-bit R component in the word in bytes 4..5, and a 16-bit G component for the odd _i_ coordinate in the word in bytes 6..7. Images in this format must: be defined with a width that is a multiple of two. For the purposes of the constraints on copy extents, this format is treated as a compressed format with a 2{times}1 compressed texel block. * ename:VK_FORMAT_G16_B16_R16_3PLANE_420_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has a 16-bit G component in each 16-bit word of plane 0, a 16-bit B component in each 16-bit word of plane 1, and a 16-bit R component in each 16-bit word of plane 2. The horizontal and vertical dimensions of the R and B planes are halved relative to the image dimensions, and each R and B component is shared with the G components for which latexmath:[\lfloor i_G \times 0.5\ rfloor = i_B = i_R] and latexmath:[\lfloor j_G \times 0.5 \rfloor = j_B = j_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. Images in this format must: be defined with a width and height that is a multiple of two. * ename:VK_FORMAT_G16_B16R16_2PLANE_420_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has a 16-bit G component in each 16-bit word of plane 0, and a two-component, 32-bit BR plane 1 consisting of a 16-bit B component in the word in bytes 0..1, and a 16-bit R component in the word in bytes 2..3. The horizontal and vertical dimensions of the BR plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R] and latexmath:[\lfloor j_G \times 0.5 \rfloor = j_B = j_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, and ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the BR plane. Images in this format must: be defined with a width and height that is a multiple of two. * ename:VK_FORMAT_G16_B16_R16_3PLANE_422_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has a 16-bit G component in each 16-bit word of plane 0, a 16-bit B component in each 16-bit word of plane 1, and a 16-bit R component in each 16-bit word of plane 2. The horizontal dimension of the R and B plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. Images in this format must: be defined with a width that is a multiple of two. * ename:VK_FORMAT_G16_B16R16_2PLANE_422_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has a 16-bit G component in each 16-bit word of plane 0, and a two-component, 32-bit BR plane 1 consisting of a 16-bit B component in the word in bytes 0..1, and a 16-bit R component in the word in bytes 2..3. The horizontal dimensions of the BR plane is halved relative to the image dimensions, and each R and B value is shared with the G components for which latexmath:[\lfloor i_G \times 0.5 \rfloor = i_B = i_R]. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, and ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the BR plane. Images in this format must: be defined with a width that is a multiple of two. * ename:VK_FORMAT_G16_B16_R16_3PLANE_444_UNORM_KHR specifies a unsigned normalized _multi-planar format_ that has a 16-bit G component in each 16-bit word of plane 0, a 16-bit B component in each 16-bit word of plane 1, and a 16-bit R component in each 16-bit word of plane 2. Each plane has the same dimensions and each R, G and B component contributes to a single texel. The location of each plane when this image is in linear layout can be determined via vkGetImageSubresourceLayout, using ename:VK_IMAGE_ASPECT_PLANE_0_BIT_KHR for the G plane, ename:VK_IMAGE_ASPECT_PLANE_1_BIT_KHR for the B plane, and ename:VK_IMAGE_ASPECT_PLANE_2_BIT_KHR for the R plane. endif::VK_KHR_sampler_ycbcr_conversion[] -- ifdef::VK_KHR_sampler_ycbcr_conversion[] [[features-formats-compatible-planes]] ==== Compatible formats of planes of multi-planar formats Individual planes of multi-planar formats are _compatible_ with single-plane formats if they occupy the same number of bits per data element. In the following table, individual planes of a _multi-planar_ format are compatible with the format listed against the relevant plane index for that multi-planar format. .Plane Format Compatibility Table [width="95%",cols="1,6,3,3",options="header"] |==== ^| Plane ^| Compatible format for plane ^| Width relative to the width _w_ of the plane with the largest dimensions ^| Height relative to the height _h_ of the plane with the largest dimensions 4+| *ename:VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R8_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R8_UNORM ^| w/2 ^| h/2 ^| 2 ^| ename:VK_FORMAT_R8_UNORM ^| w/2 ^| h/2 4+| *ename:VK_FORMAT_G8_B8R8_2PLANE_420_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R8_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R8G8_UNORM ^| w/2 ^| h/2 4+| *ename:VK_FORMAT_G8_B8_R8_3PLANE_422_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R8_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R8_UNORM ^| w/2 ^| h ^| 2 ^| ename:VK_FORMAT_R8_UNORM ^| w/2 ^| h 4+| *ename:VK_FORMAT_G8_B8R8_2PLANE_422_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R8_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R8G8_UNORM ^| w/2 ^| h 4+| *ename:VK_FORMAT_G8_B8_R8_3PLANE_444_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R8_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R8_UNORM ^| w ^| h ^| 2 ^| ename:VK_FORMAT_R8_UNORM ^| w ^| h 4+| *ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_420_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w/2 ^| h/2 ^| 2 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w/2 ^| h/2 4+| *ename:VK_FORMAT_G10X6_B10X6R10X6_2PLANE_420_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R10X6G10X6_UNORM_2PACK16_KHR ^| w/2 ^| h/2 4+| *ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_422_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w/2 ^| h ^| 2 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w/2 ^| h 4+| *ename:VK_FORMAT_G10X6_B10X6R10X6_2PLANE_422_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R10X6G10X6_UNORM_2PACK16_KHR ^| w/2 ^| h 4+| *ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_444_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w ^| h ^| 2 ^| ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR ^| w ^| h 4+| *ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_420_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w/2 ^| h/2 ^| 2 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w/2 ^| h/2 4+| *ename:VK_FORMAT_G12X4_B12X4R12X4_2PLANE_420_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R12X4G12X4_UNORM_2PACK16_KHR ^| w/2 ^| h/2 4+| *ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_422_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w/2 ^| h ^| 2 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w/2 ^| h 4+| *ename:VK_FORMAT_G12X4_B12X4R12X4_2PLANE_422_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R12X4G12X4_UNORM_2PACK16_KHR ^| w/2 ^| h 4+| *ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_444_UNORM_3PACK16_KHR* ^| 0 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w ^| h ^| 2 ^| ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR ^| w ^| h 4+| *ename:VK_FORMAT_G16_B16_R16_3PLANE_420_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R16_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R16_UNORM ^| w/2 ^| h/2 ^| 2 ^| ename:VK_FORMAT_R16_UNORM ^| w/2 ^| h/2 4+| *ename:VK_FORMAT_G16_B16R16_2PLANE_420_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R16_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R16G16_UNORM ^| w/2 ^| h/2 4+| *ename:VK_FORMAT_G16_B16_R16_3PLANE_422_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R16_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R16_UNORM ^| w/2 ^| h ^| 2 ^| ename:VK_FORMAT_R16_UNORM ^| w/2 ^| h 4+| *ename:VK_FORMAT_G16_B16R16_2PLANE_422_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R16_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R16G16_UNORM ^| w/2 ^| h 4+| *ename:VK_FORMAT_G16_B16_R16_3PLANE_444_UNORM_KHR* ^| 0 ^| ename:VK_FORMAT_R16_UNORM ^| w ^| h ^| 1 ^| ename:VK_FORMAT_R16_UNORM ^| w ^| h ^| 2 ^| ename:VK_FORMAT_R16_UNORM ^| w ^| h |==== endif::VK_KHR_sampler_ycbcr_conversion[] [[features-formats-packed]] ==== Packed Formats For the purposes of address alignment when accessing buffer memory containing vertex attribute or texel data, the following formats are considered _packed_ - whole texels or attributes are stored in a single data element, rather than individual components occupying a single data element: * <>: ** ename:VK_FORMAT_R4G4_UNORM_PACK8 * <>: ** ename:VK_FORMAT_R4G4B4A4_UNORM_PACK16 ** ename:VK_FORMAT_B4G4R4A4_UNORM_PACK16 ** ename:VK_FORMAT_R5G6B5_UNORM_PACK16 ** ename:VK_FORMAT_B5G6R5_UNORM_PACK16 ** ename:VK_FORMAT_R5G5B5A1_UNORM_PACK16 ** ename:VK_FORMAT_B5G5R5A1_UNORM_PACK16 ** ename:VK_FORMAT_A1R5G5B5_UNORM_PACK16 * <>: ** ename:VK_FORMAT_A8B8G8R8_UNORM_PACK32 ** ename:VK_FORMAT_A8B8G8R8_SNORM_PACK32 ** ename:VK_FORMAT_A8B8G8R8_USCALED_PACK32 ** ename:VK_FORMAT_A8B8G8R8_SSCALED_PACK32 ** ename:VK_FORMAT_A8B8G8R8_UINT_PACK32 ** ename:VK_FORMAT_A8B8G8R8_SINT_PACK32 ** ename:VK_FORMAT_A8B8G8R8_SRGB_PACK32 ** ename:VK_FORMAT_A2R10G10B10_UNORM_PACK32 ** ename:VK_FORMAT_A2R10G10B10_SNORM_PACK32 ** ename:VK_FORMAT_A2R10G10B10_USCALED_PACK32 ** ename:VK_FORMAT_A2R10G10B10_SSCALED_PACK32 ** ename:VK_FORMAT_A2R10G10B10_UINT_PACK32 ** ename:VK_FORMAT_A2R10G10B10_SINT_PACK32 ** ename:VK_FORMAT_A2B10G10R10_UNORM_PACK32 ** ename:VK_FORMAT_A2B10G10R10_SNORM_PACK32 ** ename:VK_FORMAT_A2B10G10R10_USCALED_PACK32 ** ename:VK_FORMAT_A2B10G10R10_SSCALED_PACK32 ** ename:VK_FORMAT_A2B10G10R10_UINT_PACK32 ** ename:VK_FORMAT_A2B10G10R10_SINT_PACK32 ** ename:VK_FORMAT_B10G11R11_UFLOAT_PACK32 ** ename:VK_FORMAT_E5B9G9R9_UFLOAT_PACK32 ** ename:VK_FORMAT_X8_D24_UNORM_PACK32 ==== Identification of Formats A "`format`" is represented by a single enum value. The name of a format is usually built up by using the following pattern: etext:VK_FORMAT_{component-format|compression-scheme}_{numeric-format} The component-format specifies either the size of the R, G, B, and A components (if they are present) in the case of a color format, or the size of the depth (D) and stencil (S) components (if they are present) in the case of a depth/stencil format (see below). An X indicates a component that is unused, but may: be present for padding. <<< [[features-formats-numericformat]] .Interpretation of Numeric Format [width="95%",cols="2,10",options="header"] |==== | Numeric format | Description | etext:UNORM | The components are unsigned normalized values in the range [eq]#[0,1]# | etext:SNORM | The components are signed normalized values in the range [eq]#[-1,1]# | etext:USCALED | The components are unsigned integer values that get converted to floating-point in the range [0,2^n^-1] | etext:SSCALED | The components are signed integer values that get converted to floating-point in the range [-2^n-1^,2^n-1^-1] | etext:UINT | The components are unsigned integer values in the range [0,2^n^-1] | etext:SINT | The components are signed integer values in the range [-2^n-1^,2^n-1^-1] | etext:UFLOAT | The components are unsigned floating-point numbers (used by packed, shared exponent, and some compressed formats) | etext:SFLOAT | The components are signed floating-point numbers | etext:SRGB | The R, G, and B components are unsigned normalized values that represent values using sRGB nonlinear encoding, while the A component (if one exists) is a regular unsigned normalized value |==== The suffix etext:_PACKnn indicates that the format is packed into an underlying type with nn bits. ifdef::VK_KHR_sampler_ycbcr_conversion[] The suffix etext:_mPACKnn is a short-hand that indicates that the format has several components (which may or may not be stored in separate _planes_) that are each packed into an underlying type with nn bits. endif::VK_KHR_sampler_ycbcr_conversion[] The suffix etext:_BLOCK indicates that the format is a block-compressed format, with the representation of multiple pixels encoded interdependently within a region. [[features-formats-compressionscheme]] .Interpretation of Compression Scheme [width="95%",cols="2,10",options="header"] |==== | Compression scheme | Description | etext:BC | Block Compression. See <>. | etext:ETC2 | Ericsson Texture Compression. See <>. | etext:EAC | ETC2 Alpha Compression. See <>. | etext:ASTC | Adaptive Scalable Texture Compression (LDR Profile). See <>. |==== ifdef::VK_KHR_sampler_ycbcr_conversion[] For _multi-planar_ images, the components in separate _planes_ are separated by underscores, and the number of planes is indicated by the addition of a etext:_2PLANE or etext:_3PLANE suffix. Similarly, the separate aspects of depth-stencil formats are separated by underscores, although these are not considered separate planes. Formats are suffixed by etext:_422 to indicate that planes other than the first are reduced in size by a factor of two horizontally or that the R and B values appear at half the horizontal frequency of the G values, etext:_420 to indicate that planes other than the first are reduced in size by a factor of two both horizontally and vertically, and etext:_444 for consistency to indicate that all three planes of a three-planar image are the same size. [NOTE] .Note ==== No common format has a single plane containing both R and B channels but does not store these channels at reduced horizontal resolution. ==== endif::VK_KHR_sampler_ycbcr_conversion[] ==== Representation Color formats must: be represented in memory in exactly the form indicated by the format's name. This means that promoting one format to another with more bits per component and/or additional components must: not occur for color formats. Depth/stencil formats have more relaxed requirements as discussed <>. Each format has an _element size_, the number of bytes used to stored one element or one compressed block, with the value of the element size listed in slink:VkFormat. The representation of non-packed formats is that the first component specified in the name of the format is in the lowest memory addresses and the last component specified is in the highest memory addresses. See <>. The in-memory ordering of bytes within a component is determined by the host endianness. [[features-formats-non-packed]] .Byte mappings for non-packed/compressed color formats [options="header",cols="16*1,10",width="100%"] |==== >|0 >|1 >|2 >|3 >|4 >|5 >|6 >|7 >|8 >|9 >|10 >|11 >|12 >|13 >|14 >|15 ^| {leftarrow} Byte ^|R 16+>s|etext:VK_FORMAT_R8_* ^|R ^|G 15+>s|etext:VK_FORMAT_R8G8_* ^|R ^|G ^|B 14+>s|etext:VK_FORMAT_R8G8B8_* ^|B ^|G ^|R 14+>s|etext:VK_FORMAT_B8G8R8_* ^|R ^|G ^|B ^|A 13+>s|etext:VK_FORMAT_R8G8B8A8_* ^|B ^|G ^|R ^|A 13+>s|etext:VK_FORMAT_B8G8R8A8_* ifdef::VK_KHR_sampler_ycbcr_conversion[] ^|G~0~ ^|B ^|G~1~ ^|R 13+>s|etext:VK_FORMAT_G8B8G8R8_422_UNORM_KHR ^|B ^|G~0~ ^|R ^|G~1~ 13+>s|etext:VK_FORMAT_B8G8R8G8_422_UNORM_KHR endif::VK_KHR_sampler_ycbcr_conversion[] 2+^|R 15+>s|etext:VK_FORMAT_R16_* 2+^|R 2+^|G 13+>s|etext:VK_FORMAT_R16G16_* 2+^|R 2+^|G 2+^|B 11+>s|etext:VK_FORMAT_R16G16B16_* 2+^|R 2+^|G 2+^|B 2+^|A 9+>s|etext:VK_FORMAT_R16G16B16A16_* ifdef::VK_KHR_sampler_ycbcr_conversion[] 2+^|G~0~ 2+^|B 2+^|G~1~ 2+^|R 9+>s|etext:VK_FORMAT_G10X6B10X6G10X6R10X6_4PACK16_422_UNORM_KHR etext:VK_FORMAT_G12X4B12X4G12X4R12X4_4PACK16_422_UNORM_KHR etext:VK_FORMAT_G16B16G16R16_UNORM_KHR 2+^|B 2+^|G~0~ 2+^|R 2+^|G~1~ 9+>s|etext:VK_FORMAT_B10X6G10X6R10X6G10X6_4PACK16_422_UNORM_KHR etext:VK_FORMAT_B12X4G12X4R12X4G12X4_4PACK16_422_UNORM_KHR etext:VK_FORMAT_B16G16R16G16_422_UNORM_KHR endif::VK_KHR_sampler_ycbcr_conversion[] 4+^|R 13+>s|etext:VK_FORMAT_R32_* 4+^|R 4+^|G 9+>s|etext:VK_FORMAT_R32G32_* 4+^|R 4+^|G 4+^|B 5+>s|etext:VK_FORMAT_R32G32B32_* 4+^|R 4+^|G 4+^|B 4+^|A >s|etext:VK_FORMAT_R32G32B32A32_* 8+^|R 9+>s|etext:VK_FORMAT_R64_* 8+^|R 8+^|G >s|etext:VK_FORMAT_R64G64_* 17+^s|etext:VK_FORMAT_R64G64B64_* as etext:VK_FORMAT_R64G64_* but with B in bytes 16-23 17+^s|etext:VK_FORMAT_R64G64B64A64_* as etext:VK_FORMAT_R64G64B64_* but with A in bytes 24-31 |==== Packed formats store multiple components within one underlying type. The bit representation is that the first component specified in the name of the format is in the most-significant bits and the last component specified is in the least-significant bits of the underlying type. The in-memory ordering of bytes comprising the underlying type is determined by the host endianness. [[features-formats-packed-8-bit]] .Bit mappings for packed 8-bit formats [options="header",cols="8*1",width="100%"] |==== 8+^h| Bit >|~7~ >|~6~ >|~5~ >|~4~ >|~3~ >|~2~ >|~1~ >|~0~ 8+^h| ename:VK_FORMAT_R4G4_UNORM_PACK8 4+^s|R 4+^s|G ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ |==== [[features-formats-packed-16-bit]] .Bit mappings for packed 16-bit formats [options="header",cols="16*1",width="100%"] |==== 16+^h| Bit >|~15~ >|~14~ >|~13~ >|~12~ >|~11~ >|~10~ >|~9~ >|~8~ >|~7~ >|~6~ >|~5~ >|~4~ >|~3~ >|~2~ >|~1~ >|~0~ 16+^h|ename:VK_FORMAT_R4G4B4A4_UNORM_PACK16 4+^s|R 4+^s|G 4+^s|B 4+^s|A ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ 16+^h|ename:VK_FORMAT_B4G4R4A4_UNORM_PACK16 4+^s|B 4+^s|G 4+^s|R 4+^s|A ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ 16+^h|ename:VK_FORMAT_R5G6B5_UNORM_PACK16 5+^s|R 6+^s|G 5+^s|B ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~5~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ 16+^h|ename:VK_FORMAT_B5G6R5_UNORM_PACK16 5+^s|B 6+^s|G 5+^s|R ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~5~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ 16+^h|ename:VK_FORMAT_R5G5B5A1_UNORM_PACK16 5+^s|R 5+^s|G 5+^s|B 1+^s|A ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~0~ 16+^h|ename:VK_FORMAT_B5G5R5A1_UNORM_PACK16 5+^s|B 5+^s|G 5+^s|R 1+^s|A ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~0~ 16+^h|ename:VK_FORMAT_A1R5G5B5_UNORM_PACK16 1+^s|A 5+^s|R 5+^s|G 5+^s|B ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ifdef::VK_KHR_sampler_ycbcr_conversion[] 16+^h|ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR 10+^s|R 6+^s|X ^| ~9~ ^| ~8~ ^| ~7~ ^| ~6~ ^| ~5~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~5~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ 16+^h|ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR 12+^s|R 4+^s|X ^| ~11~ ^| ~10~ ^| ~9~ ^| ~8~ ^| ~7~ ^| ~6~ ^| ~5~ ^| ~4~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ ^| ~3~ ^| ~2~ ^| ~1~ ^| ~0~ endif::VK_KHR_sampler_ycbcr_conversion[] |==== [[features-formats-packed-32-bit]] .Bit mappings for packed 32-bit formats [cols="32*1",options="header"] |==== 32+^h|Bit >|~31~ >|~30~ >|~29~ >|~28~ >|~27~ >|~26~ >|~25~ >|~24~ >|~23~ >|~22~ >|~21~ >|~20~ >|~19~ >|~18~ >|~17~ >|~16~ >|~15~ >|~14~ >|~13~ >|~12~ >|~11~ >|~10~ >|~9~ >|~8~ >|~7~ >|~6~ >|~5~ >|~4~ >|~3~ >|~2~ >|~1~ >|~0~ 32+^h|etext:VK_FORMAT_A8B8G8R8_*_PACK32 8+^s|A 8+^s|B 8+^s|G 8+^s|R ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ 32+^h|etext:VK_FORMAT_A2R10G10B10_*_PACK32 2+^s|A 10+^s|R 10+^s|G 10+^s|B ^|~1~ ^|~0~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ 32+^h|etext:VK_FORMAT_A2B10G10R10_*_PACK32 2+^s|A 10+^s|B 10+^s|G 10+^s|R ^|~1~ ^|~0~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ 32+^h|ename:VK_FORMAT_B10G11R11_UFLOAT_PACK32 10+^s|B 11+^s|G 11+^s|R ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~10~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~10~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ 32+^h|ename:VK_FORMAT_E5B9G9R9_UFLOAT_PACK32 5+^s|E 9+^s|B 9+^s|G 9+^s|R ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ 32+^h|ename:VK_FORMAT_X8_D24_UNORM_PACK32 8+^s|X 24+^s|D ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ ^|~23~ ^|~22~ ^|~21~ ^|~20~ ^|~19~ ^|~18~ ^|~17~ ^|~16~ ^|~15~ ^|~14~ ^|~13~ ^|~12~ ^|~11~ ^|~10~ ^|~9~ ^|~8~ ^|~7~ ^|~6~ ^|~5~ ^|~4~ ^|~3~ ^|~2~ ^|~1~ ^|~0~ |==== [[features-formats-depth-stencil]] ==== Depth/Stencil Formats Depth/stencil formats are considered opaque and need not be stored in the exact number of bits per texel or component ordering indicated by the format enum. However, implementations must: not substitute a different depth or stencil precision than that described in the format (e.g. D16 must: not be implemented as D24 or D32). [[features-formats-compatibility-classes]] ==== Format Compatibility Classes Uncompressed color formats are _compatible_ with each other if they occupy the same number of bits per data element. Compressed color formats are compatible with each other if the only difference between them is the numerical type of the uncompressed pixels (e.g. signed vs. unsigned, or SRGB vs. UNORM encoding). Each depth/stencil format is only compatible with itself. In the <> table, all the formats in the same row are compatible. [[features-formats-compatibility]] .Compatible formats [width="90%",cols="4,10",options="header"] |==== | Class | Formats | 8-bit | ename:VK_FORMAT_R4G4_UNORM_PACK8, + ename:VK_FORMAT_R8_UNORM, + ename:VK_FORMAT_R8_SNORM, + ename:VK_FORMAT_R8_USCALED, + ename:VK_FORMAT_R8_SSCALED, + ename:VK_FORMAT_R8_UINT, + ename:VK_FORMAT_R8_SINT, + ename:VK_FORMAT_R8_SRGB | 16-bit | ename:VK_FORMAT_R4G4B4A4_UNORM_PACK16, + ename:VK_FORMAT_B4G4R4A4_UNORM_PACK16, + ename:VK_FORMAT_R5G6B5_UNORM_PACK16, + ename:VK_FORMAT_B5G6R5_UNORM_PACK16, + ename:VK_FORMAT_R5G5B5A1_UNORM_PACK16, + ename:VK_FORMAT_B5G5R5A1_UNORM_PACK16, + ename:VK_FORMAT_A1R5G5B5_UNORM_PACK16, + ename:VK_FORMAT_R8G8_UNORM, + ename:VK_FORMAT_R8G8_SNORM, + ename:VK_FORMAT_R8G8_USCALED, + ename:VK_FORMAT_R8G8_SSCALED, + ename:VK_FORMAT_R8G8_UINT, + ename:VK_FORMAT_R8G8_SINT, + ename:VK_FORMAT_R8G8_SRGB, + ename:VK_FORMAT_R16_UNORM, + ename:VK_FORMAT_R16_SNORM, + ename:VK_FORMAT_R16_USCALED, + ename:VK_FORMAT_R16_SSCALED, + ename:VK_FORMAT_R16_UINT, + ename:VK_FORMAT_R16_SINT, + ifndef::VK_KHR_sampler_ycbcr_conversion[] ename:VK_FORMAT_R16_SFLOAT endif::VK_KHR_sampler_ycbcr_conversion[] ifdef::VK_KHR_sampler_ycbcr_conversion[] ename:VK_FORMAT_R16_SFLOAT, + ename:VK_FORMAT_R10X6_UNORM_PACK16_KHR, + ename:VK_FORMAT_R12X4_UNORM_PACK16_KHR endif::VK_KHR_sampler_ycbcr_conversion[] | 24-bit | ename:VK_FORMAT_R8G8B8_UNORM, + ename:VK_FORMAT_R8G8B8_SNORM, + ename:VK_FORMAT_R8G8B8_USCALED, + ename:VK_FORMAT_R8G8B8_SSCALED, + ename:VK_FORMAT_R8G8B8_UINT, + ename:VK_FORMAT_R8G8B8_SINT, + ename:VK_FORMAT_R8G8B8_SRGB, + ename:VK_FORMAT_B8G8R8_UNORM, + ename:VK_FORMAT_B8G8R8_SNORM, + ename:VK_FORMAT_B8G8R8_USCALED, + ename:VK_FORMAT_B8G8R8_SSCALED, + ename:VK_FORMAT_B8G8R8_UINT, + ename:VK_FORMAT_B8G8R8_SINT, + ename:VK_FORMAT_B8G8R8_SRGB | 32-bit | ename:VK_FORMAT_R8G8B8A8_UNORM, + ename:VK_FORMAT_R8G8B8A8_SNORM, + ename:VK_FORMAT_R8G8B8A8_USCALED, + ename:VK_FORMAT_R8G8B8A8_SSCALED, + ename:VK_FORMAT_R8G8B8A8_UINT, + ename:VK_FORMAT_R8G8B8A8_SINT, + ename:VK_FORMAT_R8G8B8A8_SRGB, + ename:VK_FORMAT_B8G8R8A8_UNORM, + ename:VK_FORMAT_B8G8R8A8_SNORM, + ename:VK_FORMAT_B8G8R8A8_USCALED, + ename:VK_FORMAT_B8G8R8A8_SSCALED, + ename:VK_FORMAT_B8G8R8A8_UINT, + ename:VK_FORMAT_B8G8R8A8_SINT, + ename:VK_FORMAT_B8G8R8A8_SRGB, + ename:VK_FORMAT_A8B8G8R8_UNORM_PACK32, + ename:VK_FORMAT_A8B8G8R8_SNORM_PACK32, + ename:VK_FORMAT_A8B8G8R8_USCALED_PACK32, + ename:VK_FORMAT_A8B8G8R8_SSCALED_PACK32, + ename:VK_FORMAT_A8B8G8R8_UINT_PACK32, + ename:VK_FORMAT_A8B8G8R8_SINT_PACK32, + ename:VK_FORMAT_A8B8G8R8_SRGB_PACK32, + ename:VK_FORMAT_A2R10G10B10_UNORM_PACK32, + ename:VK_FORMAT_A2R10G10B10_SNORM_PACK32, + ename:VK_FORMAT_A2R10G10B10_USCALED_PACK32, + ename:VK_FORMAT_A2R10G10B10_SSCALED_PACK32, + ename:VK_FORMAT_A2R10G10B10_UINT_PACK32, + ename:VK_FORMAT_A2R10G10B10_SINT_PACK32, + ename:VK_FORMAT_A2B10G10R10_UNORM_PACK32, + ename:VK_FORMAT_A2B10G10R10_SNORM_PACK32, + ename:VK_FORMAT_A2B10G10R10_USCALED_PACK32, + ename:VK_FORMAT_A2B10G10R10_SSCALED_PACK32, + ename:VK_FORMAT_A2B10G10R10_UINT_PACK32, + ename:VK_FORMAT_A2B10G10R10_SINT_PACK32, + ename:VK_FORMAT_R16G16_UNORM, + ename:VK_FORMAT_R16G16_SNORM, + ename:VK_FORMAT_R16G16_USCALED, + ename:VK_FORMAT_R16G16_SSCALED, + ename:VK_FORMAT_R16G16_UINT, + ename:VK_FORMAT_R16G16_SINT, + ename:VK_FORMAT_R16G16_SFLOAT, + ename:VK_FORMAT_R32_UINT, + ename:VK_FORMAT_R32_SINT, + ename:VK_FORMAT_R32_SFLOAT, + ename:VK_FORMAT_B10G11R11_UFLOAT_PACK32, + ifndef::VK_KHR_sampler_ycbcr_conversion[] ename:VK_FORMAT_E5B9G9R9_UFLOAT_PACK32 endif::VK_KHR_sampler_ycbcr_conversion[] ifdef::VK_KHR_sampler_ycbcr_conversion[] ename:VK_FORMAT_E5B9G9R9_UFLOAT_PACK32, + ename:VK_FORMAT_R10X6G10X6_UNORM_2PACK16_KHR, + ename:VK_FORMAT_R12X4G12X4_UNORM_2PACK16_KHR | 32-bit G8B8G8R8 | ename:VK_FORMAT_G8B8G8R8_422_UNORM_KHR | 32-bit B8G8R8G8 | ename:VK_FORMAT_B8G8R8G8_422_UNORM_KHR endif::VK_KHR_sampler_ycbcr_conversion[] | 48-bit | ename:VK_FORMAT_R16G16B16_UNORM, + ename:VK_FORMAT_R16G16B16_SNORM, + ename:VK_FORMAT_R16G16B16_USCALED, + ename:VK_FORMAT_R16G16B16_SSCALED, + ename:VK_FORMAT_R16G16B16_UINT, + ename:VK_FORMAT_R16G16B16_SINT, + ename:VK_FORMAT_R16G16B16_SFLOAT | 64-bit | ename:VK_FORMAT_R16G16B16A16_UNORM, + ename:VK_FORMAT_R16G16B16A16_SNORM, + ename:VK_FORMAT_R16G16B16A16_USCALED, + ename:VK_FORMAT_R16G16B16A16_SSCALED, + ename:VK_FORMAT_R16G16B16A16_UINT, + ename:VK_FORMAT_R16G16B16A16_SINT, + ename:VK_FORMAT_R16G16B16A16_SFLOAT, + ename:VK_FORMAT_R32G32_UINT, + ename:VK_FORMAT_R32G32_SINT, + ename:VK_FORMAT_R32G32_SFLOAT, + ename:VK_FORMAT_R64_UINT, + ename:VK_FORMAT_R64_SINT, + ename:VK_FORMAT_R64_SFLOAT ifdef::VK_KHR_sampler_ycbcr_conversion[] | 64-bit R10G10B10A10 | ename:VK_FORMAT_R10X6G10X6B10X6A10X6_UNORM_4PACK16_KHR | 64-bit G10B10G10R10 | ename:VK_FORMAT_G10X6B10X6G10X6R10X6_422_UNORM_4PACK16_KHR | 64-bit B10G10R10G10 | ename:VK_FORMAT_B10X6G10X6R10X6G10X6_422_UNORM_4PACK16_KHR | 64-bit R12G12B12A12 | ename:VK_FORMAT_R12X4G12X4B12X4A12X4_UNORM_4PACK16_KHR | 64-bit G12B12G12R12 | ename:VK_FORMAT_G12X4B12X4G12X4R12X4_422_UNORM_4PACK16_KHR | 64-bit B12G12R12G12 | ename:VK_FORMAT_B12X4G12X4R12X4G12X4_422_UNORM_4PACK16_KHR | 64-bit G16B16G16R16 | ename:VK_FORMAT_G16B16G16R16_422_UNORM_KHR | 64-bit B16G16R16G16 | ename:VK_FORMAT_B16G16R16G16_422_UNORM_KHR endif::VK_KHR_sampler_ycbcr_conversion[] | 96-bit | ename:VK_FORMAT_R32G32B32_UINT, + ename:VK_FORMAT_R32G32B32_SINT, + ename:VK_FORMAT_R32G32B32_SFLOAT | 128-bit | ename:VK_FORMAT_R32G32B32A32_UINT, + ename:VK_FORMAT_R32G32B32A32_SINT, + ename:VK_FORMAT_R32G32B32A32_SFLOAT, + ename:VK_FORMAT_R64G64_UINT, + ename:VK_FORMAT_R64G64_SINT, + ename:VK_FORMAT_R64G64_SFLOAT | 192-bit | ename:VK_FORMAT_R64G64B64_UINT, + ename:VK_FORMAT_R64G64B64_SINT, + ename:VK_FORMAT_R64G64B64_SFLOAT | 256-bit | ename:VK_FORMAT_R64G64B64A64_UINT, + ename:VK_FORMAT_R64G64B64A64_SINT, + ename:VK_FORMAT_R64G64B64A64_SFLOAT | BC1_RGB | ename:VK_FORMAT_BC1_RGB_UNORM_BLOCK, + ename:VK_FORMAT_BC1_RGB_SRGB_BLOCK | BC1_RGBA | ename:VK_FORMAT_BC1_RGBA_UNORM_BLOCK, + ename:VK_FORMAT_BC1_RGBA_SRGB_BLOCK | BC2 | ename:VK_FORMAT_BC2_UNORM_BLOCK, + ename:VK_FORMAT_BC2_SRGB_BLOCK | BC3 | ename:VK_FORMAT_BC3_UNORM_BLOCK, + ename:VK_FORMAT_BC3_SRGB_BLOCK | BC4 | ename:VK_FORMAT_BC4_UNORM_BLOCK, + ename:VK_FORMAT_BC4_SNORM_BLOCK | BC5 | ename:VK_FORMAT_BC5_UNORM_BLOCK, + ename:VK_FORMAT_BC5_SNORM_BLOCK | BC6H | ename:VK_FORMAT_BC6H_UFLOAT_BLOCK, + ename:VK_FORMAT_BC6H_SFLOAT_BLOCK | BC7 | ename:VK_FORMAT_BC7_UNORM_BLOCK, + ename:VK_FORMAT_BC7_SRGB_BLOCK | ETC2_RGB | ename:VK_FORMAT_ETC2_R8G8B8_UNORM_BLOCK, + ename:VK_FORMAT_ETC2_R8G8B8_SRGB_BLOCK | ETC2_RGBA | ename:VK_FORMAT_ETC2_R8G8B8A1_UNORM_BLOCK, + ename:VK_FORMAT_ETC2_R8G8B8A1_SRGB_BLOCK | ETC2_EAC_RGBA | ename:VK_FORMAT_ETC2_R8G8B8A8_UNORM_BLOCK, + ename:VK_FORMAT_ETC2_R8G8B8A8_SRGB_BLOCK | EAC_R | ename:VK_FORMAT_EAC_R11_UNORM_BLOCK, + ename:VK_FORMAT_EAC_R11_SNORM_BLOCK | EAC_RG | ename:VK_FORMAT_EAC_R11G11_UNORM_BLOCK, + ename:VK_FORMAT_EAC_R11G11_SNORM_BLOCK | ASTC_4x4 | ename:VK_FORMAT_ASTC_4x4_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_4x4_SRGB_BLOCK | ASTC_5x4 | ename:VK_FORMAT_ASTC_5x4_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_5x4_SRGB_BLOCK | ASTC_5x5 | ename:VK_FORMAT_ASTC_5x5_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_5x5_SRGB_BLOCK | ASTC_6x5 | ename:VK_FORMAT_ASTC_6x5_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_6x5_SRGB_BLOCK | ASTC_6x6 | ename:VK_FORMAT_ASTC_6x6_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_6x6_SRGB_BLOCK | ASTC_8x5 | ename:VK_FORMAT_ASTC_8x5_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_8x5_SRGB_BLOCK | ASTC_8x6 | ename:VK_FORMAT_ASTC_8x6_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_8x6_SRGB_BLOCK | ASTC_8x8 | ename:VK_FORMAT_ASTC_8x8_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_8x8_SRGB_BLOCK | ASTC_10x5 | ename:VK_FORMAT_ASTC_10x5_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_10x5_SRGB_BLOCK | ASTC_10x6 | ename:VK_FORMAT_ASTC_10x6_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_10x6_SRGB_BLOCK | ASTC_10x8 | ename:VK_FORMAT_ASTC_10x8_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_10x8_SRGB_BLOCK | ASTC_10x10 | ename:VK_FORMAT_ASTC_10x10_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_10x10_SRGB_BLOCK | ASTC_12x10 | ename:VK_FORMAT_ASTC_12x10_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_12x10_SRGB_BLOCK | ASTC_12x12 | ename:VK_FORMAT_ASTC_12x12_UNORM_BLOCK, + ename:VK_FORMAT_ASTC_12x12_SRGB_BLOCK | D16 | ename:VK_FORMAT_D16_UNORM | D24 | ename:VK_FORMAT_X8_D24_UNORM_PACK32 | D32 | ename:VK_FORMAT_D32_SFLOAT | S8 | ename:VK_FORMAT_S8_UINT | D16S8 | ename:VK_FORMAT_D16_UNORM_S8_UINT | D24S8 | ename:VK_FORMAT_D24_UNORM_S8_UINT | D32S8 | ename:VK_FORMAT_D32_SFLOAT_S8_UINT ifdef::VK_KHR_sampler_ycbcr_conversion[] | 8-bit 3-plane 420 | ename:VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM_KHR | 8-bit 2-plane 420 | ename:VK_FORMAT_G8_B8R8_2PLANE_420_UNORM_KHR | 8-bit 3-plane 422 | ename:VK_FORMAT_G8_B8_R8_3PLANE_422_UNORM_KHR | 8-bit 2-plane 422 | ename:VK_FORMAT_G8_B8R8_2PLANE_422_UNORM_KHR | 8-bit 3-plane 444 | ename:VK_FORMAT_G8_B8_R8_3PLANE_444_UNORM_KHR | 10-bit 3-plane 420 | ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_420_UNORM_3PACK16_KHR | 10-bit 2-plane 420 | ename:VK_FORMAT_G10X6_B10X6R10X6_2PLANE_420_UNORM_3PACK16_KHR | 10-bit 3-plane 422 | ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_422_UNORM_3PACK16_KHR | 10-bit 2-plane 422 | ename:VK_FORMAT_G10X6_B10X6R10X6_2PLANE_422_UNORM_3PACK16_KHR | 10-bit 3-plane 444 | ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_444_UNORM_3PACK16_KHR | 12-bit 3-plane 420 | ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_420_UNORM_3PACK16_KHR | 12-bit 2-plane 420 | ename:VK_FORMAT_G12X4_B12X4R12X4_2PLANE_420_UNORM_3PACK16_KHR | 12-bit 3-plane 422 | ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_422_UNORM_3PACK16_KHR | 12-bit 2-plane 422 | ename:VK_FORMAT_G12X4_B12X4R12X4_2PLANE_422_UNORM_3PACK16_KHR | 12-bit 3-plane 444 | ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_444_UNORM_3PACK16_KHR | 16-bit 3-plane 420 | ename:VK_FORMAT_G16_B16_R16_3PLANE_420_UNORM_KHR | 16-bit 2-plane 420 | ename:VK_FORMAT_G16_B16R16_2PLANE_420_UNORM_KHR | 16-bit 3-plane 422 | ename:VK_FORMAT_G16_B16_R16_3PLANE_422_UNORM_KHR | 16-bit 2-plane 422 | ename:VK_FORMAT_G16_B16R16_2PLANE_422_UNORM_KHR | 16-bit 3-plane 444 | ename:VK_FORMAT_G16_B16_R16_3PLANE_444_UNORM_KHR endif::VK_KHR_sampler_ycbcr_conversion[] |==== [[features-formats-properties]] === Format Properties [open,refpage='vkGetPhysicalDeviceFormatProperties',desc='Lists physical device\'s format capabilities',type='protos'] -- To query supported format features which are properties of the physical device, call: include::../api/protos/vkGetPhysicalDeviceFormatProperties.txt[] * pname:physicalDevice is the physical device from which to query the format properties. * pname:format is the format whose properties are queried. * pname:pFormatProperties is a pointer to a slink:VkFormatProperties structure in which physical device properties for pname:format are returned. include::../validity/protos/vkGetPhysicalDeviceFormatProperties.txt[] -- [open,refpage='VkFormatProperties',desc='Structure specifying image format properties',type='structs'] -- The sname:VkFormatProperties structure is defined as: include::../api/structs/VkFormatProperties.txt[] * pname:linearTilingFeatures is a bitmask of elink:VkFormatFeatureFlagBits specifying features supported by images created with a pname:tiling parameter of ename:VK_IMAGE_TILING_LINEAR. * pname:optimalTilingFeatures is a bitmask of elink:VkFormatFeatureFlagBits specifying features supported by images created with a pname:tiling parameter of ename:VK_IMAGE_TILING_OPTIMAL. * pname:bufferFeatures is a bitmask of elink:VkFormatFeatureFlagBits specifying features supported by buffers. [NOTE] .Note ==== ifndef::VK_KHR_maintenance1[] If no format feature flags are supported, then the only possible use would be image transfers - which alone are not useful. As such, if no format feature flags are supported, the format itself is not supported, and images of that format cannot be created. endif::VK_KHR_maintenance1[] ifdef::VK_KHR_maintenance1[] If no format feature flags are supported, the format itself is not supported, and images of that format cannot be created. endif::VK_KHR_maintenance1[] ==== If pname:format is a block-compression format, then buffers must: not support any features for the format. include::../validity/structs/VkFormatProperties.txt[] -- [open,refpage='VkFormatFeatureFlagBits',desc='Bitmask specifying features supported by a buffer',type='enums'] -- Bits which can: be set in the slink:VkFormatProperties features pname:linearTilingFeatures, pname:optimalTilingFeatures, and pname:bufferFeatures are: include::../api/enums/VkFormatFeatureFlagBits.txt[] The following bits may: be set in pname:linearTilingFeatures and pname:optimalTilingFeatures, specifying that the features are supported by <> or <> created with the queried flink:vkGetPhysicalDeviceFormatProperties::pname:format: * ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT specifies that an image view can: be <>. * ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT specifies that an image view can: be used as a <>. * ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT specifies that an image view can: be used as storage image that supports atomic operations. * ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT specifies that an image view can: be used as a framebuffer color attachment and as an input attachment. * ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT specifies that an image view can: be used as a framebuffer color attachment that supports blending and as an input attachment. * ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT specifies that an image view can: be used as a framebuffer depth/stencil attachment and as an input attachment. * ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT specifies that an image can: be used as pname:srcImage for the fname:vkCmdBlitImage command. * ename:VK_FORMAT_FEATURE_BLIT_DST_BIT specifies that an image can: be used as pname:dstImage for the fname:vkCmdBlitImage command. * ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT specifies that if ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT is also set, an image view can: be used with a sampler that has either of pname:magFilter or pname:minFilter set to ename:VK_FILTER_LINEAR, or pname:mipmapMode set to ename:VK_SAMPLER_MIPMAP_MODE_LINEAR. If ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT is also set, an image can be used as the pname:srcImage to flink:vkCmdBlitImage with a pname:filter of ename:VK_FILTER_LINEAR. This bit must: only be exposed for formats that also support the ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT or ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT. + If the format being queried is a depth/stencil format, this bit only indicates that the depth aspect (not the stencil aspect) of an image of this format supports linear filtering, and that linear filtering of the depth aspect is supported whether depth compare is enabled in the sampler or not. If this bit is not present, linear filtering with depth compare disabled is unsupported and linear filtering with depth compare enabled is supported, but may: compute the filtered value in an implementation-dependent manner which differs from the normal rules of linear filtering. The resulting value must: be in the range [eq]#[0,1]# and should: be proportional to, or a weighted average of, the number of comparison passes or failures. ifdef::VK_KHR_maintenance1[] * ename:VK_FORMAT_FEATURE_TRANSFER_SRC_BIT_KHR specifies that an image can: be used as a source image for <>. * ename:VK_FORMAT_FEATURE_TRANSFER_DST_BIT_KHR specifies that an image can: be used as a destination image for <> and <>. endif::VK_KHR_maintenance1[] ifdef::VK_EXT_sampler_filter_minmax[] * ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_MINMAX_BIT_EXT specifies sname:VkImage can: be used as a sampled image with a min or max elink:VkSamplerReductionModeEXT. This bit must: only be exposed for formats that also support the ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT. endif::VK_EXT_sampler_filter_minmax[] ifdef::VK_IMG_filter_cubic[] include::VK_IMG_filter_cubic/filter_cubic_sampled_bit_description.txt[] endif::VK_IMG_filter_cubic[] ifdef::VK_KHR_sampler_ycbcr_conversion[] * ename:VK_FORMAT_FEATURE_MIDPOINT_CHROMA_SAMPLES_BIT_KHR specifies that an application can: define a <> using this format as a source, and that an image of this format can: be used with a sname:VkSamplerYcbcrConversionCreateInfoKHR pname:xChromaOffset and/or pname:yChromaOffset of ename:VK_CHROMA_LOCATION_MIDPOINT_KHR. Otherwise both pname:xChromaOffset and pname:yChromaOffset must: be ename:VK_CHROMA_LOCATION_COSITED_EVEN_KHR. If a format does not incorporate chroma downsampling (it is not a "`422`" or "`420`" format) but the implementation supports sampler Y'C~B~C~R~ conversion for this format, the implementation must: set ename:VK_FORMAT_FEATURE_MIDPOINT_CHROMA_SAMPLES_BIT_KHR. * ename:VK_FORMAT_FEATURE_COSITED_CHROMA_SAMPLES_BIT_KHR specifies that an application can: define a <> using this format as a source, and that an image of this format can: be used with a sname:VkSamplerYcbcrConversionCreateInfoKHR pname:xChromaOffset and/or pname:yChromaOffset of ename:VK_CHROMA_LOCATION_COSITED_EVEN_KHR. Otherwise both pname:xChromaOffset and pname:yChromaOffset must: be ename:VK_CHROMA_LOCATION_MIDPOINT_KHR. If neither ename:VK_FORMAT_FEATURE_COSITED_CHROMA_SAMPLES_BIT_KHR nor ename:VK_FORMAT_FEATURE_MIDPOINT_CHROMA_SAMPLES_BIT_KHR is set, the application must: not define a <> using this format as a source. * ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_YCBCR_CONVERSION_LINEAR_FILTER_BIT_KHR specifies that the format can do linear sampler filtering (min/magFilter) whilst sampler Y'C~B~C~R~ conversion is enabled. * ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_YCBCR_CONVERSION_SEPARATE_RECONSTRUCTION_FILTER_BIT_KHR specifies that the format can have different chroma, min, and mag filters. * ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_YCBCR_CONVERSION_CHROMA_RECONSTRUCTION_EXPLICIT_BIT_KHR specifies that reconstruction is explicit, as described in <>. If this bit is not present, reconstruction is implicit by default. * ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_YCBCR_CONVERSION_CHROMA_RECONSTRUCTION_EXPLICIT_FORCEABLE_BIT_KHR specifies that reconstruction can: be forcibly made explicit by setting slink:VkSamplerYcbcrConversionCreateInfoKHR::pname:forceExplicitReconstruction to ename:VK_TRUE. * ename:VK_FORMAT_FEATURE_DISJOINT_BIT_KHR specifies that a multi-planar image can: have the ename:VK_IMAGE_CREATE_DISJOINT_BIT_KHR set during image creation. An implementation must: not set ename:VK_FORMAT_FEATURE_DISJOINT_BIT_KHR for _single-plane formats_. endif::VK_KHR_sampler_ycbcr_conversion[] The following bits may: be set in pname:bufferFeatures, specifying that the features are supported by <> or <> created with the queried flink:vkGetPhysicalDeviceProperties::pname:format: * ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT specifies that the format can: be used to create a buffer view that can: be bound to a ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER descriptor. * ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT specifies that the format can: be used to create a buffer view that can: be bound to a ename:VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER descriptor. * ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT specifies that atomic operations are supported on ename:VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER with this format. * ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT specifies that the format can: be used as a vertex attribute format (sname:VkVertexInputAttributeDescription::pname:format). -- ifdef::VK_KHR_get_physical_device_properties2[] [open,refpage='vkGetPhysicalDeviceFormatProperties2KHR',desc='Lists physical device\'s format capabilities',type='protos'] -- To query supported format features which are properties of the physical device, call: include::../api/protos/vkGetPhysicalDeviceFormatProperties2KHR.txt[] * pname:physicalDevice is the physical device from which to query the format properties. * pname:format is the format whose properties are queried. * pname:pFormatProperties is a pointer to a slink:VkFormatProperties2KHR structure in which physical device properties for pname:format are returned. fname:vkGetPhysicalDeviceFormatProperties2KHR behaves similarly to flink:vkGetPhysicalDeviceFormatProperties, with the ability to return extended information in a pname:pNext chain of output structures. include::../validity/protos/vkGetPhysicalDeviceFormatProperties2KHR.txt[] -- [open,refpage='VkFormatProperties2KHR',desc='Structure specifying image format properties',type='structs'] -- The sname:VkFormatProperties2KHR structure is defined as: include::../api/structs/VkFormatProperties2KHR.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:formatProperties is a structure of type slink:VkFormatProperties describing features supported by the requested format. include::../validity/structs/VkFormatProperties2KHR.txt[] -- endif::VK_KHR_get_physical_device_properties2[] [[features-required-format-support]] === Required Format Support Implementations must: support at least the following set of features on the listed formats. For images, these features must: be supported for every elink:VkImageType (including arrayed and cube variants) unless otherwise noted. These features are supported on existing formats without needing to advertise an extension or needing to explicitly enable them. Support for additional functionality beyond the requirements listed here is queried using the flink:vkGetPhysicalDeviceFormatProperties command. The following tables show which feature bits must: be supported for each format. ifdef::VK_KHR_maintenance1[] Formats that are required to support ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT must: also support ename:VK_FORMAT_FEATURE_TRANSFER_SRC_BIT_KHR and ename:VK_FORMAT_FEATURE_TRANSFER_DST_BIT_KHR. endif::VK_KHR_maintenance1[] .Key for format feature tables [width="70%",cols="1,10"] |==== ^|{sym1} | This feature must: be supported on the named format ^|{sym2} | This feature must: be supported on at least some of the named formats, with more information in the table where the symbol appears |==== .Feature bits in pname:optimalTilingFeatures [width="70%"] |==== ifdef::VK_KHR_maintenance1[] |ename:VK_FORMAT_FEATURE_TRANSFER_SRC_BIT_KHR |ename:VK_FORMAT_FEATURE_TRANSFER_DST_BIT_KHR endif::VK_KHR_maintenance1[] |ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT |ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT |ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT |ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT |ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT |ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT |ename:VK_FORMAT_FEATURE_BLIT_DST_BIT |ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT |ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT ifdef::VK_EXT_sampler_filter_minmax[] |ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_MINMAX_BIT_EXT endif::VK_EXT_sampler_filter_minmax[] |==== .Feature bits in pname:bufferFeatures [width="70%"] |==== |ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT |ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT |ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT |ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT |==== <<< [[features-formats-mandatory-features-subbyte]] .Mandatory format support: sub-byte channels [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_UNDEFINED | | | | | | | | | | | | | | ename:VK_FORMAT_R4G4_UNORM_PACK8 | | | | | | | | | | | | | | ename:VK_FORMAT_R4G4B4A4_UNORM_PACK16 | | | | | | | | | | | | | | ename:VK_FORMAT_B4G4R4A4_UNORM_PACK16 | {sym1} | {sym1} | {sym1} | | | | | | | | | | | ename:VK_FORMAT_R5G6B5_UNORM_PACK16 | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | | | | | ename:VK_FORMAT_B5G6R5_UNORM_PACK16 | | | | | | | | | | | | | | ename:VK_FORMAT_R5G5B5A1_UNORM_PACK16 | | | | | | | | | | | | | | ename:VK_FORMAT_B5G5R5A1_UNORM_PACK16 | | | | | | | | | | | | | | ename:VK_FORMAT_A1R5G5B5_UNORM_PACK16 | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | | | | |==== <<< [[features-formats-mandatory-features-2byte]] .Mandatory format support: 1-3 byte-sized channels [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_R8_UNORM | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | | | ename:VK_FORMAT_R8_SNORM | {sym1} | {sym1} | {sym1} | | | | | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R8_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R8_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R8_UINT | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R8_SINT | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R8_SRGB | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8_UNORM | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | | | ename:VK_FORMAT_R8G8_SNORM | {sym1} | {sym1} | {sym1} | | | | | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R8G8_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8_UINT | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R8G8_SINT | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R8G8_SRGB | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8_UNORM | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8_SNORM | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8_SINT | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8_SRGB | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8_UNORM | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8_SNORM | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8_SINT | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8_SRGB | | | | | | | | | | | | | |==== <<< [[features-formats-mandatory-features-4byte]] .Mandatory format support: 4 byte-sized channels [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_R8G8B8A8_UNORM | {sym1} | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R8G8B8A8_SNORM | {sym1} | {sym1} | {sym1} | {sym1} | | | | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R8G8B8A8_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8A8_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R8G8B8A8_UINT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R8G8B8A8_SINT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R8G8B8A8_SRGB | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | | | | | ename:VK_FORMAT_B8G8R8A8_UNORM | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | | | ename:VK_FORMAT_B8G8R8A8_SNORM | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8A8_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8A8_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8A8_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8A8_SINT | | | | | | | | | | | | | | ename:VK_FORMAT_B8G8R8A8_SRGB | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | | | | | ename:VK_FORMAT_A8B8G8R8_UNORM_PACK32 | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_A8B8G8R8_SNORM_PACK32 | {sym1} | {sym1} | {sym1} | | | | | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_A8B8G8R8_USCALED_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A8B8G8R8_SSCALED_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A8B8G8R8_UINT_PACK32 | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_A8B8G8R8_SINT_PACK32 | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_A8B8G8R8_SRGB_PACK32 | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | | | | |==== <<< [[features-formats-mandatory-features-10bit]] .Mandatory format support: 10-bit channels [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_A2R10G10B10_UNORM_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2R10G10B10_SNORM_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2R10G10B10_USCALED_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2R10G10B10_SSCALED_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2R10G10B10_UINT_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2R10G10B10_SINT_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2B10G10R10_UNORM_PACK32 | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | | | ename:VK_FORMAT_A2B10G10R10_SNORM_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2B10G10R10_USCALED_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2B10G10R10_SSCALED_PACK32 | | | | | | | | | | | | | | ename:VK_FORMAT_A2B10G10R10_UINT_PACK32 | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | | {sym1} | | | ename:VK_FORMAT_A2B10G10R10_SINT_PACK32 | | | | | | | | | | | | | |==== <<< [[features-formats-mandatory-features-16bit]] .Mandatory format support: 16-bit channels [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_R16_UNORM | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R16_SNORM | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R16_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R16_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R16_UINT | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R16_SINT | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R16_SFLOAT | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | | | ename:VK_FORMAT_R16G16_UNORM | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R16G16_SNORM | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R16G16_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16_UINT | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R16G16_SINT | {sym1} | {sym1} | | | | {sym1} | {sym1} | | | {sym1} | {sym1} | | | ename:VK_FORMAT_R16G16_SFLOAT | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | | | ename:VK_FORMAT_R16G16B16_UNORM | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16_SNORM | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16_SINT | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16_SFLOAT | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16A16_UNORM | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R16G16B16A16_SNORM | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R16G16B16A16_USCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16A16_SSCALED | | | | | | | | | | | | | | ename:VK_FORMAT_R16G16B16A16_UINT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R16G16B16A16_SINT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R16G16B16A16_SFLOAT | {sym1} | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | {sym1} | | {sym1} | {sym1} | {sym1} | |==== <<< [[features-formats-mandatory-features-32bit]] .Mandatory format support: 32-bit channels [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_R32_UINT | {sym1} | {sym1} | | {sym1} | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | {sym1} | ename:VK_FORMAT_R32_SINT | {sym1} | {sym1} | | {sym1} | {sym1} | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | {sym1} | ename:VK_FORMAT_R32_SFLOAT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R32G32_UINT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R32G32_SINT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R32G32_SFLOAT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R32G32B32_UINT | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R32G32B32_SINT | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R32G32B32_SFLOAT | | | | | | | | | | {sym1} | | | | ename:VK_FORMAT_R32G32B32A32_UINT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R32G32B32A32_SINT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | | ename:VK_FORMAT_R32G32B32A32_SFLOAT | {sym1} | {sym1} | | {sym1} | | {sym1} | {sym1} | | | {sym1} | {sym1} | {sym1} | |==== <<< [[features-formats-mandatory-features-64bit]] .Mandatory format support: 64-bit/uneven channels [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_R64_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_R64_SINT | | | | | | | | | | | | | | ename:VK_FORMAT_R64_SFLOAT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64_SINT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64_SFLOAT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64B64_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64B64_SINT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64B64_SFLOAT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64B64A64_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64B64A64_SINT | | | | | | | | | | | | | | ename:VK_FORMAT_R64G64B64A64_SFLOAT | | | | | | | | | | | | | | ename:VK_FORMAT_B10G11R11_UFLOAT_PACK32 | {sym1} | {sym1} | {sym1} | | | | | | | | {sym1} | | | ename:VK_FORMAT_E5B9G9R9_UFLOAT_PACK32 | {sym1} | {sym1} | {sym1} | | | | | | | | | | |==== [[features-formats-mandatory-features-depth-stencil]] .Mandatory format support: depth/stencil with elink:VkImageType ename:VK_IMAGE_TYPE_2D [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_D16_UNORM | {sym1} | {sym1} | | | | | | | {sym1} | | | | | ename:VK_FORMAT_X8_D24_UNORM_PACK32 | | | | | | | | | {sym2} | | | | | ename:VK_FORMAT_D32_SFLOAT | {sym1} | {sym1} | | | | | | | {sym2} | | | | | ename:VK_FORMAT_S8_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_D16_UNORM_S8_UINT | | | | | | | | | | | | | | ename:VK_FORMAT_D24_UNORM_S8_UINT | | | | | | | | | {sym2} | | | | | ename:VK_FORMAT_D32_SFLOAT_S8_UINT | | | | | | | | | {sym2} | | | | 14+| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT feature must: be supported for at least one of ename:VK_FORMAT_X8_D24_UNORM_PACK32 and ename:VK_FORMAT_D32_SFLOAT, and must: be supported for at least one of ename:VK_FORMAT_D24_UNORM_S8_UINT and ename:VK_FORMAT_D32_SFLOAT_S8_UINT. |==== <<< [[features-formats-mandatory-features-bcn]] .Mandatory format support: BC compressed formats with elink:VkImageType ename:VK_IMAGE_TYPE_2D and ename:VK_IMAGE_TYPE_3D [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_BC1_RGB_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC1_RGB_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC1_RGBA_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC1_RGBA_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC2_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC2_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC3_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC3_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC4_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC4_SNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC5_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC5_SNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC6H_UFLOAT_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC6H_SFLOAT_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC7_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_BC7_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | 14+| The ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT, ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT and ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT features must: be supported in pname:optimalTilingFeatures for all the formats in at least one of: this table, <>, or <>. |==== <<< [[features-formats-mandatory-features-etc]] .Mandatory format support: ETC2 and EAC compressed formats with elink:VkImageType ename:VK_IMAGE_TYPE_2D [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_ETC2_R8G8B8_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ETC2_R8G8B8_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ETC2_R8G8B8A1_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ETC2_R8G8B8A1_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ETC2_R8G8B8A8_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ETC2_R8G8B8A8_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_EAC_R11_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_EAC_R11_SNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_EAC_R11G11_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_EAC_R11G11_SNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | 14+|The ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT, ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT and ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT features must: be supported in pname:optimalTilingFeatures for all the formats in at least one of: this table, <>, or <>. |==== <<< [[features-formats-mandatory-features-astc]] .Mandatory format support: ASTC LDR compressed formats with elink:VkImageType ename:VK_IMAGE_TYPE_2D [width="100%",cols="10,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 14+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT 13+>| ename:VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_BIT .13+^.^| {downarrow} 12+>| ename:VK_FORMAT_FEATURE_UNIFORM_TEXEL_BUFFER_BIT .12+^.^| {downarrow} 11+>| ename:VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT .11+^.^| {downarrow} 10+>| ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_BLIT_DST_BIT .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT .5+^.^| {downarrow} 4+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT .4+^.^| {downarrow} 3+>| ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT .3+^.^| {downarrow} 2+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_ASTC_4x4_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_4x4_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_5x4_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_5x4_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_5x5_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_5x5_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_6x5_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_6x5_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_6x6_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_6x6_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_8x5_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_8x5_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_8x6_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_8x6_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_8x8_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_8x8_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_10x5_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_10x5_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_10x6_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_10x6_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_10x8_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_10x8_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_10x10_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_10x10_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_12x10_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_12x10_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_12x12_UNORM_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | | ename:VK_FORMAT_ASTC_12x12_SRGB_BLOCK | {sym2} | {sym2} | {sym2} | | | | | | | | | | 14+|The ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT, ename:VK_FORMAT_FEATURE_BLIT_SRC_BIT and ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT features must: be supported in pname:optimalTilingFeatures for all the formats in at least one of: this table, <>, or <>. |==== ifdef::VK_IMG_filter_cubic[] include::VK_IMG_filter_cubic/supported_formats.txt[] endif::VK_IMG_filter_cubic[] ifdef::VK_KHR_sampler_ycbcr_conversion[] To be used with sname:VkImageView with pname:subresourceRange.aspectMask = ename:VK_IMAGE_ASPECT_COLOR_BIT, <> must: be enabled for the following formats: [[features-formats-requiring-sampler-ycbcr-conversion]] .Formats requiring sampler Y'C~B~C~R~ conversion for ename:VK_IMAGE_ASPECT_COLOR_BIT image views [width="100%",cols="15,^1,^1,^1,^1,^1,^1,^1,^1,^1,^1",options="unbreakable"] |==== 11+>| Format must: be supported if slink:VkPhysicalDeviceSamplerYcbcrConversionFeaturesKHR is enabled 10+>| Format is treated as having 2{times}1 texel blocks by transfer operations .10+^.^| {downarrow} 9+>| ename:VK_FORMAT_FEATURE_COSITED_CHROMA_SAMPLES_BIT_KHR .9+^.^| {downarrow} 8+>| ename:VK_FORMAT_FEATURE_TRANSFER_DST_BIT_KHR .8+^.^| {downarrow} 7+>| ename:VK_FORMAT_FEATURE_TRANSFER_SRC_BIT_KHR .7+^.^| {downarrow} 6+>| ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_BIT .6+^.^| {downarrow} 5+>| ename:VK_FORMAT_FEATURE_DISJOINT_BIT_KHR .5+^.^| {downarrow} 4+>| Multi-planar format with three planes .4+^.^| {downarrow} 3+>| Multi-planar format with two planes .3+^.^| {downarrow} 2+>| Single-plane format .2+^.^| {downarrow} s| Format ^.^| {downarrow} | ename:VK_FORMAT_G8B8G8R8_422_UNORM_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | {sym1} | | ename:VK_FORMAT_B8G8R8G8_422_UNORM_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | {sym1} | | ename:VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM_KHR | | | {sym1} | {sym2} | {sym1} | {sym1} | {sym1} | {sym1} | | {sym1} | ename:VK_FORMAT_G8_B8R8_2PLANE_420_UNORM_KHR | | {sym1} | | {sym2} | {sym1} | {sym1} | {sym1} | {sym1} | | {sym1} | ename:VK_FORMAT_G8_B8_R8_3PLANE_422_UNORM_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G8_B8R8_2PLANE_422_UNORM_KHR | | {sym1} | | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G8_B8_R8_3PLANE_444_UNORM_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_R10X6G10X6B10X6A10X6_UNORM_4PACK16_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G10X6B10X6G10X6R10X6_422_UNORM_4PACK16_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | {sym1} | | ename:VK_FORMAT_B10X6G10X6R10X6G10X6_422_UNORM_4PACK16_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | {sym1} | | ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_420_UNORM_3PACK16_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G10X6_B10X6R10X6_2PLANE_420_UNORM_3PACK16_KHR | | {sym1} | | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_422_UNORM_3PACK16_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G10X6_B10X6R10X6_2PLANE_422_UNORM_3PACK16_KHR | | {sym1} | | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G10X6_B10X6_R10X6_3PLANE_444_UNORM_3PACK16_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_R12X4G12X4B12X4A12X4_UNORM_4PACK16_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G12X4B12X4G12X4R12X4_422_UNORM_4PACK16_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | {sym1} | | ename:VK_FORMAT_B12X4G12X4R12X4G12X4_422_UNORM_4PACK16_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | {sym1} | | ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_420_UNORM_3PACK16_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G12X4_B12X4R12X4_2PLANE_420_UNORM_3PACK16_KHR | | {sym1} | | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_422_UNORM_3PACK16_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G12X4_B12X4R12X4_2PLANE_422_UNORM_3PACK16_KHR | | {sym1} | | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G12X4_B12X4_R12X4_3PLANE_444_UNORM_3PACK16_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G16B16G16R16_422_UNORM_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | {sym1} | | ename:VK_FORMAT_B16G16R16G16_422_UNORM_KHR | {sym1} | | | | {sym2} | {sym2} | {sym2} | | {sym1} | | ename:VK_FORMAT_G16_B16_R16_3PLANE_420_UNORM_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G16_B16R16_2PLANE_420_UNORM_KHR | | {sym1} | | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G16_B16_R16_3PLANE_422_UNORM_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G16_B16R16_2PLANE_422_UNORM_KHR | | {sym1} | | {sym2} | {sym2} | {sym2} | {sym2} | | | | ename:VK_FORMAT_G16_B16_R16_3PLANE_444_UNORM_KHR | | | {sym1} | {sym2} | {sym2} | {sym2} | {sym2} | | | 11+| Format features marked {sym1} must: be supported if the format is supported 11+| Format features marked {sym2} may: be supported by the format |==== endif::VK_KHR_sampler_ycbcr_conversion[] == Additional Image Capabilities In addition to the minimum capabilities described in the previous sections (<> and <>), implementations may: support additional capabilities for certain types of images. For example, larger dimensions or additional sample counts for certain image types, or additional capabilities for _linear_ tiling format images. [open,refpage='vkGetPhysicalDeviceImageFormatProperties',desc='Lists physical device\'s image format capabilities',type='protos'] -- To query additional capabilities specific to image types, call: include::../api/protos/vkGetPhysicalDeviceImageFormatProperties.txt[] * pname:physicalDevice is the physical device from which to query the image capabilities. * pname:format is a elink:VkFormat value specifying the image format, corresponding to slink:VkImageCreateInfo::pname:format. * pname:type is a elink:VkImageType value specifying the image type, corresponding to slink:VkImageCreateInfo::pname:imageType. * pname:tiling is a elink:VkImageTiling value specifying the image tiling, corresponding to slink:VkImageCreateInfo::pname:tiling. * pname:usage is a bitmask of elink:VkImageUsageFlagBits specifying the intended usage of the image, corresponding to slink:VkImageCreateInfo::pname:usage. * pname:flags is a bitmask of elink:VkImageCreateFlagBits specifying additional parameters of the image, corresponding to slink:VkImageCreateInfo::pname:flags. * pname:pImageFormatProperties points to an instance of the slink:VkImageFormatProperties structure in which capabilities are returned. The pname:format, pname:type, pname:tiling, pname:usage, and pname:flags parameters correspond to parameters that would be consumed by flink:vkCreateImage (as members of sname:VkImageCreateInfo). If pname:format is not a supported image format, or if the combination of pname:format, pname:type, pname:tiling, pname:usage, and pname:flags is not supported for images, then fname:vkGetPhysicalDeviceImageFormatProperties returns ename:VK_ERROR_FORMAT_NOT_SUPPORTED. The limitations on an image format that are reported by fname:vkGetPhysicalDeviceImageFormatProperties have the following property: if code:usage1 and code:usage2 of type elink:VkImageUsageFlags are such that the bits set in code:usage1 are a subset of the bits set in code:usage2, and code:flags1 and code:flags2 of type elink:VkImageCreateFlags are such that the bits set in code:flags1 are a subset of the bits set in code:flags2, then the limitations for code:usage1 and code:flags1 must: be no more strict than the limitations for code:usage2 and code:flags2, for all values of pname:format, pname:type, and pname:tiling. include::../validity/protos/vkGetPhysicalDeviceImageFormatProperties.txt[] -- [open,refpage='VkImageFormatProperties',desc='Structure specifying a image format properties',type='structs'] -- The sname:VkImageFormatProperties structure is defined as: include::../api/structs/VkImageFormatProperties.txt[] * pname:maxExtent are the maximum image dimensions. See the <> section below for how these values are constrained by pname:type. * pname:maxMipLevels is the maximum number of mipmap levels. pname:maxMipLevels must: either be equal to 1 (valid only if pname:tiling is ename:VK_IMAGE_TILING_LINEAR) or be equal to [eq]#{lceil}log~2~(max(pname:width, pname:height, pname:depth)){rceil} {plus} 1#. [eq]#pname:width#, [eq]#pname:height#, and [eq]#pname:depth# are taken from the corresponding members of pname:maxExtent. * pname:maxArrayLayers is the maximum number of array layers. pname:maxArrayLayers must: either be equal to 1 or be greater than or equal to the pname:maxImageArrayLayers member of slink:VkPhysicalDeviceLimits. A value of 1 is valid only if pname:tiling is ename:VK_IMAGE_TILING_LINEAR or if pname:type is ename:VK_IMAGE_TYPE_3D. * pname:sampleCounts is a bitmask of elink:VkSampleCountFlagBits specifying all the supported sample counts for this image as described <>. * pname:maxResourceSize is an upper bound on the total image size in bytes, inclusive of all image subresources. Implementations may: have an address space limit on total size of a resource, which is advertised by this property. pname:maxResourceSize must: be at least 2^31^. [NOTE] .Note ==== There is no mechanism to query the size of an image before creating it, to compare that size against pname:maxResourceSize. If an application attempts to create an image that exceeds this limit, the creation will fail or the image will be invalid. While the advertised limit must: be at least 2^31^, it may: not be possible to create an image that approaches that size, particularly for ename:VK_IMAGE_TYPE_1D. ==== If the combination of parameters to fname:vkGetPhysicalDeviceImageFormatProperties is not supported by the implementation for use in flink:vkCreateImage, then all members of sname:VkImageFormatProperties will be filled with zero. include::../validity/structs/VkImageFormatProperties.txt[] -- ifdef::VK_NV_external_memory_capabilities[] include::./VK_NV_external_memory_capabilities/external_image_format.txt[] endif::VK_NV_external_memory_capabilities[] ifdef::VK_KHR_get_physical_device_properties2[] [open,refpage='vkGetPhysicalDeviceImageFormatProperties2KHR',desc='Lists physical device\'s image format capabilities',type='protos'] -- To query additional capabilities specific to image types, call: include::../api/protos/vkGetPhysicalDeviceImageFormatProperties2KHR.txt[] * pname:physicalDevice is the physical device from which to query the image capabilities. * pname:pImageFormatInfo points to an instance of the slink:VkPhysicalDeviceImageFormatInfo2KHR structure, describing the parameters that would be consumed by flink:vkCreateImage. * pname:pImageFormatProperties points to an instance of the slink:VkImageFormatProperties2KHR structure in which capabilities are returned. fname:vkGetPhysicalDeviceImageFormatProperties2KHR behaves similarly to flink:vkGetPhysicalDeviceImageFormatProperties, with the ability to return extended information in a pname:pNext chain of output structures. If the loader implementation emulates fname:vkGetPhysicalDeviceImageFormatProperties2KHR on a device that does not support the extension, and the query involves a structure the loader does not support, fname:vkGetPhysicalDeviceImageFormatProperties2KHR returns ename:VK_ERROR_FORMAT_NOT_SUPPORTED. include::../validity/protos/vkGetPhysicalDeviceImageFormatProperties2KHR.txt[] -- [open,refpage='VkPhysicalDeviceImageFormatInfo2KHR',desc='Structure specifying image creation parameters',type='structs'] -- The sname:VkPhysicalDeviceImageFormatInfo2KHR structure is defined as: include::../api/structs/VkPhysicalDeviceImageFormatInfo2KHR.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. The pname:pNext chain of sname:VkPhysicalDeviceImageFormatInfo2KHR is used to provide additional image parameters to fname:vkGetPhysicalDeviceImageFormatProperties2KHR. * pname:format is a elink:VkFormat value indicating the image format, corresponding to slink:VkImageCreateInfo::pname:format. * pname:type is a elink:VkImateType value indicating the image type, corresponding to slink:VkImageCreateInfo::pname:imageType. * pname:tiling is a elink:VkImageTiling value indicating the image tiling, corresponding to slink:VkImageCreateInfo::pname:tiling. * pname:usage is a bitmask of elink:VkImageUsageFlagBits indicating the intended usage of the image, corresponding to slink:VkImageCreateInfo::pname:usage. * pname:flags is a bitmask of elink:VkImageCreateFlagBits indicating additional parameters of the image, corresponding to slink:VkImageCreateInfo::pname:flags. The members of sname:VkPhysicalDeviceImageFormatInfo2KHR correspond to the arguments to flink:vkGetPhysicalDeviceImageFormatProperties, with pname:sType and pname:pNext added for extensibility. include::../validity/structs/VkPhysicalDeviceImageFormatInfo2KHR.txt[] -- [open,refpage='VkImageFormatProperties2KHR',desc='Structure specifying a image format properties',type='structs'] -- The sname:VkImageFormatProperties2KHR structure is defined as: include::../api/structs/VkImageFormatProperties2KHR.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. The pname:pNext chain of sname:VkImageFormatProperties2KHR is used to allow the specification of additional capabilities to be returned from fname:vkGetPhysicalDeviceImageFormatProperties2KHR. * pname:imageFormatProperties is an instance of a slink:VkImageFormatProperties structure in which capabilities are returned. If the combination of parameters to fname:vkGetPhysicalDeviceImageFormatProperties2KHR is not supported by the implementation for use in flink:vkCreateImage, then all members of pname:imageFormatProperties will be filled with zero. include::../validity/structs/VkImageFormatProperties2KHR.txt[] -- ifdef::VK_AMD_texture_gather_bias_lod[] [open,refpage='VkTextureLODGatherFormatPropertiesAMD',desc='Structure informing whether or not texture gather bias/LOD functionality is supported for a given image format and a given physical device.',type='structs'] -- To determine if texture gather functions that take explicit LOD and/or bias argument values can be used with a given image format, add slink:VkImageFormatProperties2KHR to the pname:pNext chain of the slink:VkPhysicalDeviceImageFormatInfo2KHR structure and slink:VkTextureLODGatherFormatPropertiesAMD to the pname:pNext chain of the slink:VkImageFormatProperties2KHR structure. The sname:VkTextureLODGatherFormatPropertiesAMD structure is defined as: include::../api/structs/VkTextureLODGatherFormatPropertiesAMD.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL`. * pname:supportsTextureGatherLODBiasAMD tells if the image format can be used with texture gather bias/LOD functions, as introduced by the ename:VK_AMD_texture_gather_bias_lod extension. (see <>). This field is set by the implementation. User-specified value is ignored. -- endif::VK_AMD_texture_gather_bias_lod[] ifdef::VK_KHR_external_memory_capabilities[] [open,refpage='VkPhysicalDeviceExternalImageFormatInfoKHR',desc='Structure specifying external image creation parameters',type='structs'] -- To determine the image capabilities compatible with an external memory handle type, add slink:VkPhysicalDeviceExternalImageFormatInfoKHR to the pname:pNext chain of the slink:VkPhysicalDeviceImageFormatInfo2KHR structure and sname:VkExternalImageFormatPropertiesKHR to the pname:pNext chain of the slink:VkImageFormatProperties2KHR structure. The sname:VkPhysicalDeviceExternalImageFormatInfoKHR structure is defined as: include::../api/structs/VkPhysicalDeviceExternalImageFormatInfoKHR.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:handleType is a elink:VkExternalMemoryHandleTypeFlagBitsKHR value specifying the memory handle type that will be used with the memory associated with the image. If pname:handleType is 0, flink:vkGetPhysicalDeviceImageFormatProperties2KHR will behave as if slink:VkPhysicalDeviceExternalImageFormatInfoKHR was not present, and slink:VkExternalImageFormatPropertiesKHR will be ignored. If pname:handleType is not compatible with the pname:format, pname:type, pname:tiling, pname:usage, and pname:flags specified in slink:VkPhysicalDeviceImageFormatInfo2KHR, then flink:vkGetPhysicalDeviceImageFormatProperties2KHR returns ename:VK_ERROR_FORMAT_NOT_SUPPORTED. include::../validity/structs/VkPhysicalDeviceExternalImageFormatInfoKHR.txt[] -- [open,refpage='VkExternalMemoryHandleTypeFlagBitsKHR',desc='Bit specifying external memory handle types',type='enums'] -- Possible values of slink:VkPhysicalDeviceExternalImageFormatInfoKHR::pname:handleType, specifying an external memory handle type, are: include::../api/enums/VkExternalMemoryHandleTypeFlagBitsKHR.txt[] * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_FD_BIT_KHR specifies a POSIX file descriptor handle that has only limited valid usage outside of Vulkan and other compatible APIs. It must: be compatible with the POSIX system calls ftext:dup, ftext:dup2, ftext:close, and the non-standard system call ftext:dup3. Additionally, it must: be transportable over a socket using an code:SCM_RIGHTS control message. It owns a reference to the underlying memory resource represented by its Vulkan memory object. * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR specifies an NT handle that has only limited valid usage outside of Vulkan and other compatible APIs. It must: be compatible with the functions ftext:DuplicateHandle, ftext:CloseHandle, ftext:CompareObjectHandles, ftext:GetHandleInformation, and ftext:SetHandleInformation. It owns a reference to the underlying memory resource represented by its Vulkan memory object. * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT_KHR specifies a global share handle that has only limited valid usage outside of Vulkan and other compatible APIs. It is not compatible with any native APIs. It does not own a reference to the underlying memory resource represented its Vulkan memory object, and will therefore become invalid when all Vulkan memory objects associated with it are destroyed. * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D11_TEXTURE_BIT_KHR specifies an NT handle returned by code:IDXGIResource1::code:CreateSharedHandle referring to a Direct3D 10 or 11 texture resource. It owns a reference to the memory used by the Direct3D resource. * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D11_TEXTURE_KMT_BIT_KHR specifies a global share handle returned by code:IDXGIResource::code:GetSharedHandle referring to a Direct3D 10 or 11 texture resource. It does not own a reference to the underlying Direct3D resource, and will therefore become invalid when all Vulkan memory objects and Direct3D resources associated with it are destroyed. * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D12_HEAP_BIT_KHR specifies an NT handle returned by code:ID3D12Device::code:CreateSharedHandle referring to a Direct3D 12 heap resource. It owns a reference to the resources used by the Direct3D heap. * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D12_RESOURCE_BIT_KHR specifies an NT handle returned by code:ID3D12Device::code:CreateSharedHandle referring to a Direct3D 12 committed resource. It owns a reference to the memory used by the Direct3D resource. <<< Some external memory handle types can only be shared within the same underlying physical device and/or the same driver version, as defined in the following table: [[external-memory-handle-types-compatibility]] .External memory handle types compatibility |==== | Handle type | sname:VkPhysicalDeviceIDPropertiesKHR::pname:driverUUID | sname:VkPhysicalDeviceIDPropertiesKHR::pname:deviceUUID | ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_FD_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D11_TEXTURE_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D11_TEXTURE_KMT_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D12_HEAP_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D12_RESOURCE_BIT_KHR | Must match | Must match |==== -- [open,refpage='VkExternalImageFormatPropertiesKHR',desc='Structure specifying supported external handle properties',type='structs'] -- The sname:VkExternalImageFormatPropertiesKHR structure is defined as: include::../api/structs/VkExternalImageFormatPropertiesKHR.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:externalMemoryProperties is an instance of the slink:VkExternalMemoryPropertiesKHR structure specifying various capabilities of the external handle type when used with the specified image creation parameters. include::../validity/structs/VkExternalImageFormatPropertiesKHR.txt[] -- [open,refpage='VkExternalMemoryPropertiesKHR',desc='Structure specifying external memory handle type capabilities',type='structs'] -- The sname:VkExternalMemoryPropertiesKHR structure is defined as: include::../api/structs/VkExternalMemoryPropertiesKHR.txt[] * pname:externalMemoryFeatures is a bitmask of elink:VkExternalMemoryFeatureFlagBitsKHR specifying the features of pname:handleType. * pname:exportFromImportedHandleTypes is a bitmask of slink:VkExternalMemoryHandleTypeFlagBitsKHR specifying which types of imported handle pname:handleType can: be exported from. * pname:compatibleHandleTypes is a bitmask of slink:VkExternalMemoryHandleTypeFlagBitsKHR specifying handle types which can: be specified at the same time as pname:handleType when creating an image compatible with external memory. pname:compatibleHandleTypes must: include at least pname:handleType. Inclusion of a handle type in pname:compatibleHandleTypes does not imply the values returned in slink:VkImageFormatProperties2KHR will be the same when slink:VkPhysicalDeviceExternalImageFormatInfoKHR::pname:handleType is set to that type. The application is responsible for querying the capabilities of all handle types intended for concurrent use in a single image and intersecting them to obtain the compatible set of capabilities. include::../validity/structs/VkExternalMemoryPropertiesKHR.txt[] -- [open,refpage='VkExternalMemoryFeatureFlagBitsKHR',desc='Bitmask specifying features of an external memory handle type',type='enums'] -- Bits which may: be set in slink:VkExternalMemoryPropertiesKHR::pname:externalMemoryFeatures, specifying features of an external memory handle type, are: include::../api/enums/VkExternalMemoryFeatureFlagBitsKHR.txt[] * ename:VK_EXTERNAL_MEMORY_FEATURE_DEDICATED_ONLY_BIT_KHR specifies that images or buffers created with the specified parameters and handle type must: use the mechanisms defined in the +VK_NV_dedicated_allocation+ extension to create (or import) a dedicated allocation for the image or buffer. * ename:VK_EXTERNAL_MEMORY_FEATURE_EXPORTABLE_BIT_KHR specifies that handles of this type can: be exported from Vulkan memory objects. * ename:VK_INTERNAL_MEMORY_FEATURE_IMPORTABLE_BIT_KHR specifies that handles of this type can: be imported as Vulkan memory objects. Because their semantics in external APIs roughly align with that of an image or buffer with a dedicated allocation in Vulkan, implementations are required: to report ename:VK_EXTERNAL_MEMORY_FEATURE_DEDICATED_ONLY_BIT_KHR for the following external handle types: * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D11_TEXTURE_BIT_KHR * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D11_TEXTURE_KMT_BIT_KHR * ename:VK_EXTERNAL_MEMORY_HANDLE_TYPE_D3D12_RESOURCE_BIT_KHR -- endif::VK_KHR_external_memory_capabilities[] ifdef::VK_KHR_sampler_ycbcr_conversion[] [open,refpage='VkSamplerYcbcrConversionImageFormatPropertiesKHR',desc='Structure specifying combined image sampler descriptor count for multi-planar images',type='structs'] -- To determine the number of combined image samplers required to support a multi-planar format, add slink:VkSamplerYcbcrConversionImageFormatPropertiesKHR to the pname:pNext chain of the slink:VkImageFormatProperties2KHR structure in a call to fname:vkGetPhysicalDeviceImageFormatProperties2KHR. The sname:VkSamplerYcbcrConversionImageFormatPropertiesKHR structure is defined as: include::../api/structs/VkSamplerYcbcrConversionImageFormatPropertiesKHR.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:combinedImageSamplerDescriptorCount is the number of combined image sampler descriptors that the implementation uses to access the format. include::../validity/structs/VkSamplerYcbcrConversionImageFormatPropertiesKHR.txt[] -- pname:combinedImageSamplerDescriptorCount affects only the count towards the pname:maxDescriptorSetSamplers, pname:maxDescriptorSetSampledImages, pname:maxPerStageDescriptorSamplers, and pname:maxPerStageDescriptorSampledImages limits, and does not affect binding numbers in the slink:VkDescriptorSetLayoutBinding. pname:combinedImageSamplerDescriptorCount is a number between 1 and the number of planes in the format. endif::VK_KHR_sampler_ycbcr_conversion[] endif::VK_KHR_get_physical_device_properties2[] [[features-supported-sample-counts]] === Supported Sample Counts fname:vkGetPhysicalDeviceImageFormatProperties returns a bitmask of elink:VkSampleCountFlagBits in pname:sampleCounts specifying the supported sample counts for the image parameters. pname:sampleCounts will be set to ename:VK_SAMPLE_COUNT_1_BIT if at least one of the following conditions is true: * pname:tiling is ename:VK_IMAGE_TILING_LINEAR * pname:type is not ename:VK_IMAGE_TYPE_2D * pname:flags contains ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT * Neither the ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT flag nor the ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT flag in sname:VkFormatProperties::pname:optimalTilingFeatures returned by flink:vkGetPhysicalDeviceFormatProperties is set Otherwise, the bits set in pname:sampleCounts will be the sample counts supported for the specified values of pname:usage and pname:format. For each bit set in pname:usage, the supported sample counts relate to the limits in sname:VkPhysicalDeviceLimits as follows: * If pname:usage includes ename:VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT and pname:format is a floating- or fixed-point color format, a superset of sname:VkPhysicalDeviceLimits::pname:framebufferColorSampleCounts * If pname:usage includes ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT, and pname:format includes a depth aspect, a superset of sname:VkPhysicalDeviceLimits::pname:framebufferDepthSampleCounts * If pname:usage includes ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT, and pname:format includes a stencil aspect, a superset of sname:VkPhysicalDeviceLimits::pname:framebufferStencilSampleCounts * If pname:usage includes ename:VK_IMAGE_USAGE_SAMPLED_BIT, and pname:format includes a color aspect, a superset of sname:VkPhysicalDeviceLimits::pname:sampledImageColorSampleCounts * If pname:usage includes ename:VK_IMAGE_USAGE_SAMPLED_BIT, and pname:format includes a depth aspect, a superset of sname:VkPhysicalDeviceLimits::pname:sampledImageDepthSampleCounts * If pname:usage includes ename:VK_IMAGE_USAGE_SAMPLED_BIT, and pname:format is an integer format, a superset of sname:VkPhysicalDeviceLimits::pname:sampledImageIntegerSampleCounts * If pname:usage includes ename:VK_IMAGE_USAGE_STORAGE_BIT, a superset of sname:VkPhysicalDeviceLimits::pname:storageImageSampleCounts If multiple bits are set in pname:usage, pname:sampleCounts will be the intersection of the per-usage values described above. If none of the bits described above are set in pname:usage, then there is no corresponding limit in sname:VkPhysicalDeviceLimits. In this case, pname:sampleCounts must: include at least ename:VK_SAMPLE_COUNT_1_BIT. [[features-extentperimagetype]] === Allowed Extent Values Based On Image Type Implementations may: support extent values larger than the <> for certain types of images subject to the constraints below. [NOTE] .Note ==== Implementations must: support images with dimensions up to the <> for all types of images. It follows that the query for additional capabilities must: return extent values that are at least as large as the required values. ==== For ename:VK_IMAGE_TYPE_1D: * [eq]#pname:maxExtent.width {geq} slink:VkPhysicalDeviceLimits.pname:maxImageDimension1D# * [eq]#pname:maxExtent.height = 1# * [eq]#pname:maxExtent.depth = 1# For ename:VK_IMAGE_TYPE_2D when pname:flags does not contain ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT: * [eq]#pname:maxExtent.width {geq} slink:VkPhysicalDeviceLimits.pname:maxImageDimension2D# * [eq]#pname:maxExtent.height {geq} slink:VkPhysicalDeviceLimits.pname:maxImageDimension2D# * [eq]#pname:maxExtent.depth = 1# For ename:VK_IMAGE_TYPE_2D when pname:flags contains ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT: * [eq]#pname:maxExtent.width {geq} slink:VkPhysicalDeviceLimits.pname:maxImageDimensionCube# * [eq]#pname:maxExtent.height {geq} slink:VkPhysicalDeviceLimits.pname:maxImageDimensionCube# * [eq]#pname:maxExtent.depth = 1# For ename:VK_IMAGE_TYPE_3D: * [eq]#pname:maxExtent.width {geq} slink:VkPhysicalDeviceLimits.pname:maxImageDimension3D# * [eq]#pname:maxExtent.height {geq} slink:VkPhysicalDeviceLimits.pname:maxImageDimension3D# * [eq]#pname:maxExtent.depth {geq} slink:VkPhysicalDeviceLimits.pname:maxImageDimension3D# ifdef::VK_KHR_external_memory_capabilities[] == Additional Buffer Capabilities In addition to the capabilities described in the previous sections (<> and <>), implementations may support additional buffer capabilities. [open,refpage='vkGetPhysicalDeviceExternalBufferPropertiesKHR',desc='Query external handle types supported by buffers',type='protos'] -- To query the external handle types supported by buffers, call: include::../api/protos/vkGetPhysicalDeviceExternalBufferPropertiesKHR.txt[] * pname:physicalDevice is the physical device from which to query the buffer capabilities. * pname:pExternalBufferInfo points to an instance of the slink:VkPhysicalDeviceExternalBufferInfoKHR structure, describing the parameters that would be consumed by flink:vkCreateBuffer. * pname:pExternalBufferProperties points to an instance of the slink:VkExternalBufferPropertiesKHR structure in which capabilities are returned. include::../validity/protos/vkGetPhysicalDeviceExternalBufferPropertiesKHR.txt[] -- [open,refpage='VkPhysicalDeviceExternalBufferInfoKHR',desc='Structure specifying buffer creation parameters',type='structs'] -- The sname:VkPhysicalDeviceExternalBufferInfoKHR structure is defined as: include::../api/structs/VkPhysicalDeviceExternalBufferInfoKHR.txt[] * pname:sType is the type of this structure * pname:pNext is NULL or a pointer to an extension-specific structure. * pname:flags is a bitmask of elink:VkBufferCreateFlagBits describing additional parameters of the buffer, corresponding to slink:VkBufferCreateInfo::pname:flags. * pname:usage is a bitmask of elink:VkBufferUsageFlagBits describing the intended usage of the buffer, corresponding to slink:VkBufferCreateInfo::pname:usage. * pname:handleType is a elink:VkExternalMemoryHandleTypeFlagBitsKHR value specifying the memory handle type that will be used with the memory associated with the buffer. include::../validity/structs/VkPhysicalDeviceExternalBufferInfoKHR.txt[] -- [open,refpage='VkExternalBufferPropertiesKHR',desc='Structure specifying supported external handle capabilities',type='structs'] -- The sname:VkExternalBufferPropertiesKHR structure is defined as: include::../api/structs/VkExternalBufferPropertiesKHR.txt[] * pname:sType is the type of this structure * pname:pNext is NULL or a pointer to an extension-specific structure. * pname:externalMemoryProperties is an instance of the slink:VkExternalMemoryPropertiesKHR structure specifying various capabilities of the external handle type when used with the specified buffer creation parameters. include::../validity/structs/VkExternalBufferPropertiesKHR.txt[] -- endif::VK_KHR_external_memory_capabilities[] ifdef::VK_KHR_external_semaphore_capabilities[] == Optional Semaphore Capabilities [open,refpage='vkGetPhysicalDeviceExternalSemaphorePropertiesKHR',desc='Function for querying external semaphore handle capabilities.',type='protos'] -- Semaphores may: support import and export of their <> to external handles. To query the external handle types supported by semaphores, call: include::../api/protos/vkGetPhysicalDeviceExternalSemaphorePropertiesKHR.txt[] * pname:physicalDevice is the physical device from which to query the semaphore capabilities. * pname:pExternalSemaphoreInfo points to an instance of the slink:VkPhysicalDeviceExternalSemaphoreInfoKHR structure, describing the parameters that would be consumed by flink:vkCreateSemaphore. * pname:pExternalSemaphoreProperties points to an instance of the slink:VkExternalSemaphorePropertiesKHR structure in which capabilities are returned. include::../validity/protos/vkGetPhysicalDeviceExternalSemaphorePropertiesKHR.txt[] -- [open,refpage='VkPhysicalDeviceExternalSemaphoreInfoKHR',desc='Structure specifying semaphore creation parameters.',type='structs'] -- The sname:VkPhysicalDeviceExternalSemaphoreInfoKHR structure is defined as: include::../api/structs/VkPhysicalDeviceExternalSemaphoreInfoKHR.txt[] * pname:sType is the type of this structure * pname:pNext is NULL or a pointer to an extension-specific structure. * pname:handleType is a elink:VkExternalSemaphoreHandleTypeFlagBitsKHR value specifying the external semaphore handle type for which capabilities will be returned. include::../validity/structs/VkPhysicalDeviceExternalSemaphoreInfoKHR.txt[] -- [open,refpage='VkExternalSemaphoreHandleTypeFlagBitsKHR',desc='Bitmask of valid external semaphore handle types',type='enums'] -- Bits which may: be set in slink:VkPhysicalDeviceExternalSemaphoreInfoKHR::pname:handleType, specifying an external semaphore handle type, are: include::../api/enums/VkExternalSemaphoreHandleTypeFlagBitsKHR.txt[] * ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_FD_BIT_KHR specifies a POSIX file descriptor handle that has only limited valid usage outside of Vulkan and other compatible APIs. It must: be compatible with the POSIX system calls code:dup, code:dup2, code:close, and the non-standard system call code:dup3. Additionally, it must: be transportable over a socket using an code:SCM_RIGHTS control message. It owns a reference to the underlying synchronization primitive represented by its Vulkan semaphore object. * ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR specifies an NT handle that has only limited valid usage outside of Vulkan and other compatible APIs. It must: be compatible with the functions code:DuplicateHandle, code:CloseHandle, code:CompareObjectHandles, code:GetHandleInformation, and code:SetHandleInformation. It owns a reference to the underlying synchronization primitive represented by its Vulkan semaphore object. * ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT_KHR specifies a global share handle that has only limited valid usage outside of Vulkan and other compatible APIs. It is not compatible with any native APIs. It does not own a reference to the underlying synchronization primitive represented its Vulkan semaphore object, and will therefore become invalid when all Vulkan semaphore objects associated with it are destroyed. * ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_D3D12_FENCE_BIT_KHR specifies an NT handle returned by code:ID3D12Device::code:CreateSharedHandle referring to a Direct3D 12 fence. It owns a reference to the underlying synchronization primitive associated with the Direct3D fence. * ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_SYNC_FD_BIT_KHR specifies a POSIX file descriptor handle to a Linux Sync File or Android Fence object. It can be used with any native API accepting a valid sync file or fence as input. It owns a reference to the underlying synchronization primitive associated with the file descriptor. Implementations which support importing this handle type must: accept any type of sync or fence FD supported by the native system they are running on. [NOTE] .Note ==== Handles of type ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_SYNC_FD_BIT_KHR generated by the implementation may represent either Linux Sync Files or Android Fences at the implementation's discretion. Applications should: only use operations defined for both types of file descriptors, unless they know via means external to Vulkan the type of the file descriptor, or are prepared to deal with the system-defined operation failures resulting from using the wrong type. ==== <<< Some external semaphore handle types can only be shared within the same underlying physical device and/or the same driver version, as defined in the following table: [[external-semaphore-handle-types-compatibility]] .External semaphore handle types compatibility |==== | Handle type | sname:VkPhysicalDeviceIDPropertiesKHR::pname:driverUUID | sname:VkPhysicalDeviceIDPropertiesKHR::pname:deviceUUID | ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_FD_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_D3D12_FENCE_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_FENCE_FD_BIT_KHR | No restriction | No restriction |==== -- [open,refpage='VkExternalSemaphorePropertiesKHR',desc='Structure describing supported external semaphore handle features',type='structs'] -- The sname:VkExternalSemaphorePropertiesKHR structure is defined as: include::../api/structs/VkExternalSemaphorePropertiesKHR.txt[] * pname:exportFromImportedHandleTypes is a bitmask of elink:VkExternalSemaphoreHandleTypeFlagBitsKHR specifying which types of imported handle pname:handleType can: be exported from. * pname:compatibleHandleTypes is a bitmask of elink:VkExternalSemaphoreHandleTypeFlagBitsKHR specifying handle types which can: be specified at the same time as pname:handleType when creating a semaphore. * pname:externalSemaphoreFeatures is a bitmask of elink:VkExternalSemaphoreFeatureFlagBitsKHR describing the features of pname:handleType. If pname:handleType is not supported by the implementation, then slink:VkExternalSemaphorePropertiesKHR::pname:externalSemaphoreFeatures will be set to zero. include::../validity/structs/VkExternalSemaphorePropertiesKHR.txt[] -- [open,refpage='VkExternalSemaphoreFeatureFlagBitsKHR',desc='Bitfield describing features of an external semaphore handle type',type='enums'] -- Possible values of slink:VkExternalSemaphorePropertiesKHR::pname:externalSemaphoreFeatures, specifying the features of an external semaphore handle type, are: include::../api/enums/VkExternalSemaphoreFeatureFlagBitsKHR.txt[] * ename:VK_EXTERNAL_SEMAPHORE_FEATURE_EXPORTABLE_BIT_KHR specifies that handles of this type can: be exported from Vulkan semaphore objects. * ename:VK_EXTERNAL_SEMAPHORE_FEATURE_IMPORTABLE_BIT_KHR specifies that handles of this type can: be imported as Vulkan semaphore objects. -- endif::VK_KHR_external_semaphore_capabilities[] ifdef::VK_KHR_external_fence_capabilities[] == Optional Fence Capabilities [open,refpage='vkGetPhysicalDeviceExternalFencePropertiesKHR',desc='Function for querying external fence handle capabilities.',type='protos'] -- Fences may: support import and export of their <> to external handles. To query the external handle types supported by fences, call: include::../api/protos/vkGetPhysicalDeviceExternalFencePropertiesKHR.txt[] * pname:physicalDevice is the physical device from which to query the fence capabilities. * pname:pExternalFenceInfo points to an instance of the slink:VkPhysicalDeviceExternalFenceInfoKHR structure, describing the parameters that would be consumed by flink:vkCreateFence. * pname:pExternalFenceProperties points to an instance of the slink:VkExternalFencePropertiesKHR structure in which capabilities are returned. include::../validity/protos/vkGetPhysicalDeviceExternalFencePropertiesKHR.txt[] -- [open,refpage='VkPhysicalDeviceExternalFenceInfoKHR',desc='Structure specifying fence creation parameters.',type='structs'] -- The sname:VkPhysicalDeviceExternalFenceInfoKHR structure is defined as: include::../api/structs/VkPhysicalDeviceExternalFenceInfoKHR.txt[] * pname:sType is the type of this structure * pname:pNext is NULL or a pointer to an extension-specific structure. * pname:handleType is a elink:VkExternalFenceHandleTypeFlagBitsKHR value indicating an external fence handle type for which capabilities will be returned. [NOTE] .Note ==== Handles of type ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_SYNC_FD_BIT_KHR generated by the implementation may represent either Linux Sync Files or Android Fences at the implementation's discretion. Applications should: only use operations defined for both types of file descriptors, unless they know via means external to Vulkan the type of the file descriptor, or are prepared to deal with the system-defined operation failures resulting from using the wrong type. ==== include::../validity/structs/VkPhysicalDeviceExternalFenceInfoKHR.txt[] -- [open,refpage='VkExternalFenceHandleTypeFlagBitsKHR',desc='Bitmask of valid external fence handle types',type='enums'] -- Bits which may: be set in slink:VkPhysicalDeviceExternalFenceInfoKHR::pname:handleType, and in the pname:exportFromImportedHandleTypes and pname:compatibleHandleTypes members of slink:VkExternalFencePropertiesKHR, to indicate external fence handle types, are: include::../api/enums/VkExternalFenceHandleTypeFlagBitsKHR.txt[] * ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_FD_BIT_KHR indicates a POSIX file descriptor handle that has only limited valid usage outside of Vulkan and other compatible APIs. It must: be compatible with the POSIX system calls code:dup, code:dup2, code:close, and the non-standard system call code:dup3. Additionally, it must: be transportable over a socket using an code:SCM_RIGHTS control message. It owns a reference to the underlying synchronization primitive represented by its Vulkan fence object. * ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR indicates an NT handle that has only limited valid usage outside of Vulkan and other compatible APIs. It must: be compatible with the functions code:DuplicateHandle, code:CloseHandle, code:CompareObjectHandles, code:GetHandleInformation, and code:SetHandleInformation. It owns a reference to the underlying synchronization primitive represented by its Vulkan fence object. * ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT_KHR indicates a global share handle that has only limited valid usage outside of Vulkan and other compatible APIs. It is not compatible with any native APIs. It does not own a reference to the underlying synchronization primitive represented by its Vulkan fence object, and will therefore become invalid when all Vulkan fence objects associated with it are destroyed. * ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_SYNC_FD_BIT_KHR indicates a POSIX file descriptor handle to a Linux Sync File or Android Fence. It can be used with any native API accepting a valid sync file or fence as input. It owns a reference to the underlying synchronization primitive associated with the file descriptor. Implementations which support importing this handle type must: accept any type of sync or fence FD supported by the native system they are running on. <<< Some external fence handle types can only be shared within the same underlying physical device and/or the same driver version, as defined in the following table: [[external-fence-handle-types-compatibility]] .External fence handle types compatibility |==== | Handle type | sname:VkPhysicalDeviceIDPropertiesKHR::pname:driverUUID | sname:VkPhysicalDeviceIDPropertiesKHR::pname:deviceUUID | ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_FD_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT_KHR | Must match | Must match | ename:VK_EXTERNAL_FENCE_HANDLE_TYPE_SYNC_FD_BIT_KHR | No restriction | No restriction |==== -- [open,refpage='VkExternalFencePropertiesKHR',desc='Structure describing supported external fence handle features',type='structs'] -- The sname:VkExternalFencePropertiesKHR structure is defined as: include::../api/structs/VkExternalFencePropertiesKHR.txt[] * pname:exportFromImportedHandleTypes is a bitmask of elink:VkExternalFenceHandleTypeFlagBitsKHR indicating which types of imported handle pname:handleType can: be exported from. * pname:compatibleHandleTypes is a bitmask of elink:VkExternalFenceHandleTypeFlagBitsKHR specifying handle types which can: be specified at the same time as pname:handleType when creating a fence. * pname:externalFenceFeatures is a bitmask of elink:VkExternalFenceFeatureFlagBitsKHR indicating the features of pname:handleType. If pname:handleType is not supported by the implementation, then slink:VkExternalFencePropertiesKHR::pname:externalFenceFeatures will be set to zero. include::../validity/structs/VkExternalFencePropertiesKHR.txt[] -- [open,refpage='VkExternalFenceFeatureFlagBitsKHR',desc='Bitfield describing features of an external fence handle type',type='enums'] -- Bits which may: be set in slink:VkExternalFencePropertiesKHR::pname:externalFenceFeatures, indicating features of a fence external handle type, are: include::../api/enums/VkExternalFenceFeatureFlagBitsKHR.txt[] * ename:VK_EXTERNAL_FENCE_FEATURE_EXPORTABLE_BIT_KHR indicates handles of this type can: be exported from Vulkan fence objects. * ename:VK_EXTERNAL_FENCE_FEATURE_IMPORTABLE_BIT_KHR indicates handles of this type can: be imported to Vulkan fence objects. -- endif::VK_KHR_external_fence_capabilities[]