* Bump API patch number and header version number to 36 for this update.
Github Issues:
* Fix "recorded with" terminology in the valid usage language for the
flink:vkCmdExecuteCommands::pname:pCommandBuffers parameter (public
issue 390).
* Modify +genvk.py+ to support specifying extensions to remove from output
generators, allowing the extension loader +vulkan_ext.c+ to be created
without WSI extensions which are statically exported by the Vulkan
loader (public issue 412).
* Added validation language for slink:VkSubpassDependency and in the
<<synchronization-access-types-supported,supported access types>>
section to catch access masks that include bits which are not supported
by pipeline stages in the stage masks (partially addresses public issue
1006).
Internal Issues:
* Added validation language for flink:vkCmdWaitEvents,
flink:vkQueueSubmit, flink:VkRenderPassCreateInfo, and in the
<<synchronization-pipeline-stages-supported>> section to prevent
recording stage dependencies that aren't supported on the queue
(internal issue 516).
* Make a few changes that generalize spec language for use with possible
future extensions by adding glossary terms and generalizing ``feature''
to ``feature or extension'' where relevant (internal issues 448, 590).
* Added "pipeline type" attribute to +vk.xml+ for relevant commands and
utilize it in automatic generation of the Command Properties table
(internal issue 517).
* Specify that WSI implementations must provide both UNORM and sRGB
formats in the description of slink:VkColorSpaceKHR (internal issue
529).
* Remove nesting of explicit valid usage statements where it is not
meaningful (internal issue 583).
Other Issues:
* Add validity language requiring that
slink:VkPushConstantRange::pname:offset be a multiple of 4, as stated in
the spec language.
* Bump API patch number and header version number to 35 for this update.
Github Issues:
* Document in the <<memory-device-hostaccess,Host Access>> section that
mapping and unmapping does not invalidate or flush the mapped memory
(public issues 27, 126).
* Redefine the entire <<synchronization>> chapter in terms of consistent
and well defined terminology, that's called out at the start of the
chapter. This terminology is applied equally to all synchronization
types, including subpass dependencies, submissions, and much of the
implicit ordering stuff dotted around the spec. Key terms are laid out
in the <<synchronization-dependencies,Execution and Memory
Dependencies>> section at the top of the rewritten chapter (public
issues 128, 131, 132, 217, 299, 300, 302, 306, 322, 346, 347, 371, 407).
* Specify order of submission for batches in the
<<vkQueueSubmit,vkQueueSubmit>> and
<<vkQueueBindSparse,vkQueueBindSparse>> commands (public issue 371).
* Add valid usage statements to each of the WSI extension sections
indicating that the WSI-specific structure parameters must be valid, and
remove automatically generated valid usage statements now covered by the
manual sections (public issue 383).
* Clarify render pass compatibility for flink:vkCmdExecuteCommands (public
issue 390).
Internal Issues:
* Update +vk.xml+ to make previously explicit valid usage statements for
<<vkDebugReportMessageEXT,vkDebugReportMessageEXT>> implicit instead
(internal issue 553).
* Add valid usage statement for slink:VkCreateImageInfo preventing
creation of 1D sparse images (internal issue 573).
* Fix Python scripts to always read/write files in utf-8 encoding, and a
logic error in reflib.py which could cause a fatal error for
malstructured asciidoc (internal issues 578, 586).
* Bump API patch number and header version number to 31 for this update.
Github Issues:
* Clarifying wording of slink:VkGraphicsPipelineCreateInfo parameters and
adding Valid Usage statements on render pass compatibility to the
<<drawing,drawing commands>> (public issue 375).
* Replace 'texel size' with 'element size', and add a definition to the
glossary (public issue 382).
* Clarify the description of ename:VK_ERROR_NATIVE_WINDOW_IN_USE_KHR to
make it accurate, but still generic (non-exhaustive). Remove two Valid
Usage statements describing error situations that will return
ename:VK_ERROR_NATIVE_WINDOW_IN_USE_KHR (public issue 387).
* Fix refBegin tag for elink:VkDebugReportFlagBitsEXT (public issue 392).
* The <<interfaces-builtin-variables,built-in variable>> code:PrimitiveId
in a fragment shader needs the code:Input storage class (public issue
393).
Internal Issues:
* Unused ({y,z} and {height,depth} for 1D, z and depth for 2D) offsets
must be 0 and unused extents must be 1. Added basic offset and extent
valid usage for slink:VkImageResolve to match that of slink:VkImageCopy
(internal issue 413).
* Describe what flink:vkGetPhysicalDeviceImageFormatProperties returns for
pname:sampleCounts when for pname:usage only includes transfer-related
flags (internal issue 478).
* Remove mention of
slink:VkPhysicalDeviceLimits::pname:maxImageArrayLayers from the valid
usage for slink:VkImageCreateInfo::pname:arrayLayers (internal issue
520).
* Tag usages of ``dynamically uniform'' as glossary terms and add a
glossary entry pointing to the SPIR-V Specification's definition of the
term (internal issue 531).
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
* Bump API patch number and header version number to 24 for this update.
Github Issues:
* Fix type mismatch in swapchain image equivalency table (public issue
289).
* Fix a copy-and-paste error in the description of
flink:vkGetSwapchainImagesKHR::pname:pSwapchainImages, that said it
was an array of ``sname:VkSwapchainImageKHR structures'' instead of
an array of ``sname:VkImage handles'' (public issue 292).
* Specify that ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT is only valid
for ename:VK_IMAGE_TYPE_2D images (public issue 293).
* Add a valid usage statement to flink:vkCmdExecuteCommands saying
that when called outside a render pass instance, the secondary
command buffers must not have been created with the
ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT (public issue
297).
* Fix description of +VK_NO_STDINT_H+ in the
<<boilerplate-platform-macros,platform macros>> section (public
issue 314).
Internal Issues:
* Normalize the language for the remaining built-in variables in the
<<interfaces-builtin-variables,Built-In Variables>> section. Fix
code:FrontFacing and code:HelperInvocation, as they should be of
code:boolean type rather than code:integer (internal issue 323).
* Clarify that when ename:VK_WHOLE_SIZE is used for a buffer
descriptor range, the effective range must still be within the max
buffer range (internal issue 426).
* Clarify that command buffers and descriptor sets are allocated
rather than created. Also clarify when the recording state of a
command buffer is relevant (internal issue 434).
* Bump API patch number and header version number to 23 for this update.
Github Issues:
* Add explicit valid value attributes to pname:sType members in vk.xml
(public issue 34).
* Clarify usage of flink:vkGetInstanceProcAddr and
flink:vkGetDeviceProcAddr (public issue 225).
* Fix a copy-and-paste error in the description of
pname:pSwapchainImageCount saying that it was the count of ``format
pairs'' instead of ``swapchain images'' (public issue 292).
* flink:vkCmdExecuteCommandBuffers requires all command buffers to be
allocated from command pools created for the same queue family (public
issue 296).
* Remove bogus +optional+ attribute for
flink:vkEnumerateDeviceLayerProperties::pname:physicalDevice from vk.xml
(public issue 301).
* Clean up the <<resources-image-views-compatibility,image and image view
compatibility table>> reference and contents. Use full enumerant names.
Refer to pname:layerCount in the ``view parameters'' column instead of
pname:arrayLayers. Require N >= 1 for the cube array subview row, not
just arrayLayers >= 6 N (public issue 304).
* Modify description of <<resources-memory-aliasing,memory aliasing>> to
be consistent with the description of
<<resources-bufferimagegranularity,buffer image granularity>> (public
issue 307).
Internal Issues:
* Describe remaining +vk_platform.h+ macros in the <<boilerplate,API
Boilerplate>> appendix (internal issue 6).
* Clarify
<<features-features-robustBufferAccess,pname:robustBufferAccess>>
feature behavior; what memory can be accessed, how bounds checking is
performed, and allowing for vectorization (internal issue 332).
* Document markup for automatic extraction of reference pages from the
spec sources in the style guide (internal issue 395).
* Allow flink:vkCreateDisplayModeKHR to return
ename:VK_ERROR_INITIALIZAION_FAILED_KHR if the user requests mode
parameters that the specified display does not support (internal issue
411).
* Remove atomic counters (atomic_uint style) from KHR_vulkan_glsl, and
more clearly remove the subroutine keyword alongside it (internal issue
421).
* Clarify behavior of flink:vkCmdBindDescriptorSets for descriptor sets
not contained in the layout (internal issue 427).
Other Commits:
* Change the order in which members of sname:VkAttachmentDescription and
sname:VkPipelineInputAssemblyStateCreateInfo are described to match
their order in the structures.
* Bump API patch number and header version number to 20 for this
update.
Github Issues:
* Replaced existing reference pages by text automatically extracted
from the specification source, or generated from vk.xml in some
cases. This isn't a complete solution for the reference pages, but
puts them in a much better state. The ref pages (only) are now
placed under a CC BY open source license, which is more current than
the obsolete license previously used.
Further improvements to the pages should not edit them directly, but
instead concentrate on the specification source from which the ref
pages are being extracted (public issues 44, 55, 160; internal issue
389).
* Bump API patch number and header version number to 18 for this
update.
Github Issues:
* Added "queue operation" terminology, and modified spec to actually
use this terminology (public issue 155). The act of submitting a
piece of work to a queue now generates "operations" for the queue to
execute, including operations to wait on/signal semaphores and
fences. Synchronization waits on these operations, making execution
dependency chains more obvious for semaphores and fences (though
additional work is still needed here). These changes include:
** Overview of "queue submission" commands in chapter
<<devsandqueues-submission>>.
** Updated descriptions for fence and semaphore waits and signals in
the synchronization chapter <<synchronization-semaphores-waiting>>,
<<synchronization-semaphores-signaling>> and
<<synchronization-fences-waiting>>.
** Clarifications to semaphore and fence operation within queue
submission functions.
** New glossary terms.
** Moved device idle and queue wait idle to synchronization chapter in
order to describe them in terms of other synchronization
primitives.
** Clarifications to semaphore and fence operation allowed removal of
the "implicit ordering guarantees" section, as this information is
now wholly covered where these primitives are described.
*** The "host writes" section of this is still there for now - in its
own section. This could probably be merged into other sections
later.
*** Modified fundamentals chapter on queue ordering to make sense in
context of the new changes, and avoid duplication.
<<fundamentals-queueoperation>>
* Added "aspect" and "component" definitions to the glossary, and made
sure these terms are referenced correctly (public issue 163).
* Update valid usage for ftext:vkGet*ProcAddr to only include
conditions that must be met to get a valid result. In particular,
it's okay to call flink:vkGetDeviceProcAddr with any string and will
get a code:NULL if that string is not a core Vulkan function or an
enabled extension function (addresses but does not fully close
public issue 214).
* Change the WSI extension dependencies to refer to version 1.0 of the
Vulkan API, instead of the pre-1.0-release internal revisions
numbers (public issue 238).
* Specified that <<interfaces-fragmentoutput,undeclared fragment
shader outputs>> result in undefined values input to the blending
unit or color attachment (public issue 240).
Internal Issues:
* Better documented that the registry XML "optional" tag for values
only applies when that value is the size of an array (internal issue
335).
* Add a stronger definition for the valid usages of
VkSpecializationMapEntry.size in the
<<pipelines-specialization-constants,Specialization Constants>>
section (internal issue 345).
* Change code:OpName to code:OpDecorate (along with appropriate
syntax) for vertex shader built-ins (internal issue 368).
* Add missing ref pages (those which are not currently stubs) to
apispec.txt for the single-page version of the ref pages (internal
issue 378).
Other Commits:
* Fix example in the <<descriptorsets,Descriptor Sets>> section to use
M, N, and I, describing set, binding, and index, consistently
throughout the example code.
* Bump API patch number and header version number to 16 for this
update.
Github Issues:
* Clarify that integer border values are meant to be 0/1, and that
integer texture lookups are sign-extended in the
<<textures-format-conversion,Format Conversion>> and
<<textures-texel-replacement,Texel Replacement>> sections (public
issue 52).
* Add logic to generate spec boilerplate without using the 'git'
command-line client, needed when building from a tarball or another
source of the Vulkan tree rather than a cloned git repo. Remove
boilerplate as part of 'clean' target (public issue 195).
* Document that color writes and clears to unused attachments have no
effect for slink:VkClearAttachment and
elink:VkColorComponentFlagBits (public issue 198).
* Fixed flink:vkCmdExecuteCommands validity statement for
sname:VkCommandBufferInheritanceInfo::pname:framebuffer. If used, it
must match the framebuffer in the current renderpass instance
(public issue 226).
* Added valid usage language to require for all functions that set
dynamic state that the currently bound graphics pipeline has the
corresponding dynamic state enabled (public issue 235).
Internal Issues:
* Clarify for flink:vkEnumerateInstanceExtensionProperties, in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section, and in the
<<glossary,Glossary>> section when functionality should be exposed
as an instance extension, as a device extension, or as both
(internal issue 109).
* Place WorkgroupSize in alphabetical order in the
<<interfaces-builtin-variables,Built-in Variables>> section
(internal issue 323).
* Corrects valid usage in vkEndRenderPass to only affect primary
render passes, as secondaries may be entirely within a render pass,
and should be able to be ended (previous language disallowed that)
(internal issue 338).
* Fix relational operator from <= to >= in the
<<features-extentperimagetype,Allowed Extent Values>> section
(internal issue 343).
* Disallow recursion under SPIR-V entry points in the
<<spirvenv-module-validation,Validation Rules within a Module>>
section (internal SPIR-V issue 37).
Other Commits:
* Use standard Python ElementTree package instead of lxml.etree in
header / validation layer / include autogeneration from XML,
reducing platform dependencies.
* Bump API patch number and header version number to 15 for this
update.
Github Issues:
* Fixed the <<glossary,Glossary>> entry for Fragment Input Attachment
Interface to specify code:UniformConstant storage class (public issue
156).
* Disallow lazily allocated memory for buffers in the description of
slink:VkMemoryRequirements::pname:memoryTypeBits (public issue 196).
* Add numbered figure captions (public issue 219).
* Fix output variable names in the <<fundamentals-fpfixedconv,Conversion
from Floating-Point to Normalized Fixed-Point>> section and related
minor normative language and markup cleanup (public issue 220).
Internal Issues:
* Fix reference to nonexistent etext:VK_IMAGE_LAYOUT_TRANSFER_{SRC,DST}BIT
to the actual etext:VK_IMAGE_LAYOUT{SRC,DST}_OPTIMAL (internal issue
296).
* Update the <<sparsememory-sparse-memory-aliasing,Sparse Resource
Implementation Guidelines>> to refer to the correct feature names
(internal issue 305).
* Bump API patch number and header version number to 13 for this
update.
Github Issues:
* Improve the description of ename:VK_PRESENT_MODE_FIFO_RELAXED_KHR in the
VK_KHR_surface extension (public issue 174).
* Clarify use of etext:*_SIMULTANEOUS_USE_BIT for secondary command
buffers (public issue 182).
* Fix typos in VK_KHR_wayland_surface extension where code:wl_device was
used instead of code:wl_display (public issue 193).
* Replaced {apiname} with ``Vulkan'' in XML validity statements (public
issue 199).
* Fix dead links for WSI handle types (public issue 200).
*** N.b. this needs to be done in WSI branches as well ***
* Use "signaled" instead of "signalled" spelling everywhere (public issue
201).
*** N.b. this needs to be done in WSI branches as well ***
* Move readme.pdf target directory for XML schema documentation into the
target generation directory, instead of leaving it checked into the spec
source tree (public issue 203).
*** N.b. need to add generated PDF to registry index/1.0 page
* Fix duplicate 'which which' typo in description of
elink:VkCommandPoolResetFlagBits (public issue 204).
* Move the <<Programmable Primitive Shading>> section up one level, out of
the <<drawing-primitive-topologies,Primitive Topologies>> section
(public issue 209).
Internal Issues:
* Clarify in the <<pipelines-cache,Pipeline Cache>> section that
implementations should not manage the size of pipeline cache (internal
issue 192).
* Deprecate the concept of device layers and associated commands (internal
issue 255).
* Remove ename:VK_INCOMPLETE from the list of possible result codes of
flink:vkGetPhysicalDeviceSurfaceCapabilitiesKHR (internal issue 314).
* Add missing std140/std430 rule: the base alignment of a member following
a structure is a multiple of the structure's base alignment (internal
issue 321).
* Fixes naming of the single elink:VkColorSpaceKHR enum from
ename:VK_COLORSPACE_SRGB_NONLINEAR_KHR to
ename:VK_COLOR_SPACE_SRGB_NONLINEAR_KHR in XML/header and the
VK_KHR_swapchain and VK_KHR_surface extensions to match the style of the
typename (space and color are two words, not one) (internal issue 322).
* Make it clear that code:LocalInvocationID should only be applied to an
input variable and normalize the language describing
code:LocalInvocationID to the language for other compute shader
variables in the <<interfaces-builtin-variables,Built-in Variables>>
section, and add normative language (internal issue 323).
* Clarify in the <<fundamentals-returncodes,Return Codes>> section that
the result pointer may be modified for specific commands, even if a
runtime error is returned (internal issue 324).
* Bump API patch number and header version number to 12 for this
update.
Github Issues:
* Change valid usage statements intended to be "sub-points" to
be actual sub-points (public issue 66).
* Replace double negation in description of
slink:VkRenderPassBeginInfo::pname:pClearValues (based on public
merge 142).
* Cleanup minor typos in spec, ref pages and XML, including those
proposed in public pull requests 144, 150, 151, 167, 168, 181, and
186.
* Use *strict subset* in describing the partial order of memory
property types for slink:VkMemoryType, and update the style guide
accordingly (public issue 190).
* Fix various "a image" -> "an image" typos (public issue 191).
* Note in the <<fundamentals-validusage,Valid Usage>> and
<<extensions-interactions,Extension Interactions>> sections that
structures defined by extensions which may be passed in structure
chains using the ptext:pNext member must: include initial
ptext:sType and ptext:pNext members (public issue 192).
Internal Issues:
* Remove duplicate language from the description of the pname:fence
parameter to flink:vkQueueSubmit and improve validity language
(internal issue 91).
* Added documentation for "optional" attribute to XML readme.tex/pdf
(internal issue 149).
* Clarify the host-side data validity rules and behavior of
flink:vkFlushMappedMemoryRanges and
flink:vkInvalidateMappedMemoryRanges (internal issue 266).
Other Commits:
* Added clarification to flink:vkCmdFillBuffer regarding the use of
ename:VK_WHOLE_SIZE.
* Fixed and documented implementation of "validextensionstructs"
attribute. in XML processing scripts and readme.tex/pdf.
* Add missing validity statements to flink:vkResetEvent and
flink:vkCmdResetEvent.
* Fix validity for the
ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT flag.
Correct all the draw/dispatch commands to mention optimally tiled
images as well as linear tiled images, and say image VIEWS instead
of images. Add validity statement to flink:vkCmdBlitImage
* Replace the {apiname} macro with hardcoded "Vulkan", now that we've
committed to that name.
* Add the VK_AMD_rasterization_order extension to vk.xml.
* Bump API patch number and header version number to 11 for this
update.
Github Issues:
* Clarify the WSI extension language by switching from the fuzzier
"ownership" language to more-consistent "acquire" language (public
issue 117).
* Clarify that memory barriers apply to all commands in the dependency
chains in the flink:vkGetRenderAreaGranularity command and the
<<synchronization-execution-and-memory-dependencies,Execution And
Memory Dependencies>> section (public issue 132).
* Clarify that a queue family is a set of queues in the
<<fundamentals-execmodel,Execution Model>> section (public issue
166).
* Removed requirement from valid usage language that
VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public
issue 171).
* Fix broken internal links, describe structures consistently, use
consistent style for SPIR-V codewords, and tag normative terms that
were missing asciidoc tags (public issue 183 and ancillary
markup/normative language fixes).
* Fix typos for slink:VkPhysicalDeviceLimits member names in
slink:VkImageCreateInfo validity language (public issue 184).
Internal Issues:
* Document that the requested patch version number specified as part
of slink:VkApplicationInfo::pname:apiVersion is ignored when
creating an instance (internal issue 176).
* Clarify handling of extension structs in the
<<fundamentals-validusageValid Usage>> section (internal issue 254).
* Update required slink:VkImageFormatProperties::pname:maxMipLevels to
be limited to the maximum allowed mipmap pyramid size corresponding
to the actual maximum supported size for the format (internal issue
256).
* Modify the <<features-extentperimagetype,Allowed Extent Values Based
On Image Type>> section so the allowed maximum extent is the maximum
image dimension supported for each dimension of the type of texture
being queried (internal issue 257).
* Clarify in the <<spirvenv-module-validation,Validation Rules within
a Module>> section that at least one of the code:LocalSize execution
mode or code:WorkgroupSize decoration is required for each compute
shader entry point in a shader module (internal issue 279).
* Add validity rules for formats in flink:vkCmdClearColorImage and
flink:vkCmdClearDepthStencilImage (internal issue 283).
* Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is
an upper bound, and that it may not be possible to create an image
anywhere near that size (internal issue 284).
Other Commits:
* Fix various minor markup errors reported by validation scripts.
* Change copyright from Khronos Free Use License to Apache 2.0 license
on relevant script/XML/header files. This does not affect the
specification source copyright.
* Bump API patch number and header version number to 10 for this
update.
Github Issues:
* Slightly tweak the <<memory-allocation,Host Memory>> allocator language
so that an application wrapping the standard C alloc/free/realloc
functions is still correct - the previous language was too strong with
regards to freeing memory. Also made certain scenarios clearer - an
implementation may now continue without error if an allocation failed
and it is able to continue correctly (public issue 21).
* Require that etext:VK_*_CREATE_SPARSE_BINDING_BIT is set when the
corresponding etext:VK_*_CREATE_SPARSE_RESIDENCY_BIT is used, in the
<<sparsememory-miptail,Mip Tail Regions>> section and related commands
flink:vkCreateBuffer and flink:vkCreateImage (public issue 84).
* Update the <<features,Features, Limits, and Formats>> chapter to clarify
interactions between optional features and dynamic state for the
pname:depthBiasClamp and pname:wideLines features (public issue 89).
* Describe the code:WorkgroupSize builtin in the
<<interfaces-builtin-variables,Built-In Variables>> section, and update
the <<compute-shaders,Compute Shaders>> section to further clarify how
to set the number of workgroups to execute in a compute shader (public
issue 145).
* Use the term *image subresource* everywhere instead of *subresource*,
except for the special case of *host-accessible subresource*, which may
be either an image subresource or buffer range (public issue 120)
* Add a note to the <<features,Features, Limits, and Formats>> section
about extensibility of structures (Public issue 165).
* Fix return code flink:vkAcquireNextImageKHR when the timeout parameter
is 0 to ename:VK_NOT_READY instead of ename:VK_TIMEOUT (public issue
170).
* Fix typo in slink:VkLayerProperties::pname:apiVersion field (public
issue 172).
Internal Issues:
* Fix a few minor internally-detected typos.
* Minor formatting tweaks to pseudocode in the <<resources,Resource
Creation>> chapter (internal issue 179).
* Fix typo in the definition of point sampling for
elink:VkCullModeFlagBits (internal issue 268).
* Bump API patch number and header version number to 8 for this
update.
Github Issues:
* Specify in the validity language for flink:vkBeginCommandBuffer that
pname:commandBuffer mustnot: currently be pending execution (public
issue 96).
* Describe depth comparison using the correct temporary variable names
in the <<textures-depth-compare-operation,Depth Compare Operation>>
section (public issue 100).
* Clarify the order of descriptor update operations in the
flink:vkUpdateDescriptorSets command (public issue 115).
* Specify in the VK_KHR_swapchain extension that
flink:vkAcquireNextImageKHR's pname:semaphore and pname:fence
parameters cannot both be sname:VK_NULL_HANDLE (partly addresses,
but does not fully close, public issue 117 / internal issue 246).
* Change reference to the "lifetime" of a Vulkan command to
"duration", and define the "duration" term (public issue 135).
* Added valid usage language for slink:VkImageLayout to require both
pname:height and pname:depth to be 1 for 1D images and pname:depth
to be 1 for 2D images (public issue 137).
* Fix SPIR-V example code in the
<<descriptorsets-inputattachment,Input Attachment>> section to
properly decorate the code:InputAttachmentIndex (public issue 139).
* Fix reference to nonexistent pname:imageInfo in the description of
flink:VkWriteDescriptorSet to refer to pname:pImageInfo (public
issue 140).
Internal Issues:
* Link to the fixed-function vertex chapter from the drawing chapter
(internal issue #110)
* Fix typo in slink:VkImageCreateInfo validity language:
ptext:maxExtent.sampleCounts -> pname:sampleCounts (internal issue
249).
* Explain why the non-core token etext:VK_IMAGE_LAYOUT_PRESENT_SRC_KHR
is used in the example in the
<<synchronization-semaphores,Semaphores>> section (internal issue
251).
* Attempt to clarify in the VK_KHR_android_surface extension's
<<platformQuerySupport_android,Android Platform Support>> section
that there is no Android-specific WSI query, and why (internal issue
252).
Other Commits:
* Add missing language about ename:VK_INCOMPLETE being returned from
array queries when the passed array is too short, in the
VK_KHR_display, VK_KHR_swapchain, and VK_KHR_surface extensions.
* Bump API patch number and header version number to 7 for this
update.
Github Issues:
* Fix slink:VkSpecializationMapEntry example to avoid C/C++ strict
aliasing issues (public issue 14).
* Clarify the meaning of "matching" in flink:vkCmdBindDescriptorSets
validity language (public issue 33).
* Add stub reference pages so xrefs to not-yet-written pages don't
generate 404 errors. However, the actual content of these pages
still needs to be filled in as time allows (public issue 44, but
does not close that issue out).
* Remove incorrect validity statement for
flink:vkGetImageSparseMemoryRequirements (public issue 85).
* Reword the
<<features-limits-bufferImageGranularity,bufferImageGranularity>>
feature in terms of "aliasing", and clarify that it applies to
bindings in the same memory object (public issue 90).
* Clarify the relationship of the slink:VkPhysicalDeviceLimits
pname:maxViewportDimensions and pname:viewportBoundsRange limits
(public issue 92).
* Specify sparse unbound texture replacement in the
<<textures-texel-replacement,Texel Replacement>> section
independently of robust buffer access language (public issue 100).
* Add the <<fundamentals-architecture-model,Architecture Model>>
section to explain architecture constraints Vulkan has chosen to
accept in order to enable portable and performant code (public issue
122).
* State that an object must not be destroyed until *all* (not *any*)
uses of that object have completed (public issue 123).
* Minor editorial cleanup (public issues 129, 134, 146, 148).
* Add validity language for layer and extension names to
slink:VkDeviceCreateInfo matching that used for
slink:VkInstanceCreateInfo (public issue 130).
* Clean up terminology for the case when the bits set in one bitmask
are a subset of the bits set in another bitmask (public issue 138).
* Document that input attachments are UniformConstant not Input, in
the <<interfaces-inputattachment,Fragment Input Attachment
Interface>> section (public glslang bug 169).
Internal Issues:
* Add max enum values to "flag bits" enums (internal issue #136).
* Clarify language around the various uses of the term "block" in the
<<appendix-compressedtex-bc,Block Compressed Image Formats>> section
(internal issue #202).
* Removed "expand" dependency from <enums> groups in vk.xml and added
auto-generation code in the scripts to infer it instead, to ensure
consistency. This caused renaming of sname:VkColorSpaceKHR and
sname:VkPresentModeKHR etext:BEGIN_RANGE (etc.) tokens, but those
tokens are metadata, not part of the API, and the Vulkan WG is OK
with this change. This change adds ranges to two additional enums
that were missing them due to not defining the "expand" attribute
(internal issue 217).
* Tweak makefile to generate ref page nroff (.3) files in the right
output directory, working around an a2x limitation (internal issue
223).
Other Commits:
* Add validity requirements for flink:vkCmdCopyQueryPoolResults
pname:dstBuffer parameter.
* Fix ref page build to generate .3 targets in the right output
directory.
* Bump API patch number and header version number to 6 for this
update.
Github Issues:
* Define 'invocation group' for compute and graphics shaders. Cleanup
definition and use of 'workgroup', and add glossary entries (public
issue 1).
* Various minor editorial fixes (public issue 33).
* Clarify locations for block members in the
<<interfaces-iointerfaces-locations,Location Assignment>>
section (public issue 45).
* Editorial fixes for <<commandbuffer-allocation,Command Buffer
Allocation>> section (public issues 54, 59).
* Clarify behavior of depth test in the <<fragops-depth,Depth
Test>> section (public issues 80, 81).
* Remove discussion of return codes from
flink:vkGetPhysicalDeviceSparseImageFormatProperties and
flink:vkGetImageSparseMemoryRequirements, which don't return values
(public issue 82).
* Allow flink:vkCmdDrawIndirect and flink:vkCmdDrawIndexedIndirect
pname:drawCount of 0, as well as 1, when the multiDrawIndirect
feature is not supported (public issue 88).
* Remove confusing wording in the <<features-limits,Limits>>
section describing the slink:VkPhysicalDeviceLimits
pname:minTexelBufferOffsetAlignment,
pname:minUniformBufferOffsetAlignment, and
pname:minStorageBufferOffsetAlignment members as both minimums and
maximums (public issue 91).
* Clarified that only the RGB components should be affected in places
where sRGB is referred to in the spec, such as ASTC formats. Minor
re-wording to avoid "color space" when actively incorrect, now that
we refer to the Data Format Spec which actually makes a distinction
between color space and transfer function (public issue 94).
* Treat pname:pPropertyCount == 0 consistently in
flink:vkEnumerateInstanceLayerProperties and
flink:vkEnumerateDeviceLayerProperties (public issue 99)
* Cleanup minor editorial issues in chapters 14-17 (public issue 100).
* Clarify definition of flink:vkEnumerateInstanceExtensionProperties
and flink:vkEnumerateDeviceExtensionProperties (public issue 101).
* Define the flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties pname:pLayerName
parameter to be a pointer to a null-terminated UTF-8 string (public
issue 101).
* Rearrange "Missing information" references in mandatory format
tables (public issue 101).
* Clarify that the enumerated extensions returned by
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties will only include
extensions provided by the platform or extensions implemented in
implicitly enabled layers (public issue 101).
* Miscellaneous editorial fixes. Include the Vulkan spec patch number
in the PDF title. Fix label on <<fig-non-strict-lines,Non
strict lines>> diagram. Use more easily distinguished symbols in
tables in the <<features-required-format-support,Required
Format Support>> section. Don't require FQDNs used as layer names be
encoded in lower case if not possible, in the
<<extensions-naming-conventions, Extension and Layer Naming
Conventions>> section (public issues 101, 119, 121).
Internal Issues:
* Fixed excessive spacing in tables in XHTML (internal issue 18).
* Clarify that ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT
applies to secondary command buffers. Previously spec only referred
to the members of pname:pCommandBuffers being affected by this bit.
Added a separate slink:VkSubmitInfo Valid Usage restriction
specifying that ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT
also applies to any secondary command buffers that are recorded into
the primary command buffers in pname:pCommandBuffers (internal issue
106).
* Clarify that slink:VkDeviceCreateInfo::pname:pEnabledFeatures can be
NULL (internal issue 117).
* Remove "the value of" where it is redundant (e.g. speaking of an API
parameter, struct member, or SPIR-V variable, but not when speaking
of color components) (internal issue 175).
* Forced patch version to always be 0 in the header. Add a
"VK_API_VERSION_<major>_<minor>" macro for people to use to do the
right thing. Add a VK_HEADER_VERSION which captures the header
release number independent of the spec patch number (internal issue
176).
* Correct description of
slink:VkPipelineShaderStageCreateInfo::pname:pName to "a pointer to
a null-terminated UTF-8 string" (internal issue #197).
Other Commits:
* Updated DataFormat spec reference to the new date for revision 5 of
that spec.
* Fixed KEEP option (to retain LaTeX intermediate files) in the
Makefile to be included when edited there, as well as set on the
command line.
* Reserve and add "VK_IMG_filter_cubic" to the registry, and implement
script functionality to add and remove validity from existing
functions. Includes schema and readme changes.
* Update GL_KHR_vulkan_glsl so push_constants do not have descriptor
sets.
* Bump API patch number to 5 for this update.
Github Issues:
* Correctly describe slink:VkPhysicalDeviceProperties pname:deviceName
member as a string, not a pointer to a string. Also one typo fix for
"hetereogeneous" (public issue 4).
* Replace maynot: macro with may: not, and "may: or maynot:" with
"may:" (public issue 4).
* Clarify that redundantly setting the state of a fence or event has
no effect (public issue 4).
* Minor fixes to ref pages to track descriptions of memory bits that
changed in the core spec. Fix name of a member in the description of
sname:sname:VkPipelineMultisampleStateCreateInfo (public issues 8,
13).
* Remove redundant validity statement for
sname:VkGraphicsPipelineCreateInfo::pname:stageCount (public issue
14).
* Fix typos in chapters 7-9 (public issue 14).
* Clarify the example demonstrating the behavior of
code:OpMemoryBarrier in the
<<shaders-execution-memory-ordering,shader memory acces
ordering>> section (public issue 16).
* Specify that freeing mapped memory implicitly unmaps the memory in
the description of flink:vkFreeMemory (public issue 17).
* Forbid allocation callbacks from calling into the API in the
<<memory-allocation,memory allocation>> section (public issue
20).
* Add missing validity rules about size being greater than 0 and
offset being less than size of object. Fix
flink:VkMappedMemoryRange's misinterpretation of offset (public
issues 27, 31).
* Add validity rule disallowing overlapping source/destination
descriptors in flink:VkCopyDescriptorSet (public issue 32).
* Clarify that array and matrix stride has to be a multiple of the
base alignment of the array or matrix in the
<<interfaces-resources-layout,Offset and Stride Assignment>>
section (public issue 38).
* Correct parenthesis floor nesting error in equation for
<<textures-RGB-sexp,RGB to shared exponent conversion>>.
Clarify case of when exp' is forced to 0, avoiding log2(0) undefined
problem (public issue 40).
* Remove redundant statement from the code:FragDepth description in
the <<interfaces-builtin-variables,Built-In Variables>>
section (public issue 47).
* Define the clamping of the
<<textures-level-of-detail-operation,bias added to the scale
factor>> by linking to the slink:VkPhysicalDevice feature
pname:maxSamplerLodBias (public issue 64).
* Fix typo "optimal linear resources" and clarify the set of resources
<<features-limits-bufferImageGranularity,the
pname:bufferImageGranularity resource>> applies to (public issue
67).
* Replace 'descriptor accessed by a pipeline' language for
sname:VkDescriptorSetAllocateInfo with more precise phrasing about
binding a descriptor set before a command that invokes work using
that set (public issue 69).
* tstripadj.svg contained an Inkscape tag which caused Firefox and IE
11 to fail to render it, and was illegal SVG. Generating Plain SVG
from the Inkscape SVG source fixes this (public issue 70).
* Fix validity for sname:VkVertexInputBindingDescription and
sname:VkVertexInputAttributeDescription numbers (public issue 72).
Internal Issues:
* Clarify the meaning of
ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT in
elink:VkFormatFeatureFlagBits with respect to depth compare
(internal issue 107).
* Added a note explaining that ename:VK_QUEUE_TRANSFER_BIT may or may
not be reported for a queue family that already supports
ename:VK_QUEUE_GRAPHICS_BIT or ename:VK_QUEUE_COMPUTE_BIT as the
former is a strict subset of the latter ones (internal issue 116).
* Add validity language for sname:VkDescriptorSetAllocateInfo about
exceeding the descriptor pool capacity (internal issue 140).
* Add ename:VK_INCOMPLETE success code for
flink:vkEnumeratePhysicalDevices query (internal issue 163).
Other Commits:
* Add the VK_NV_glsl_shader extension definitions to the API.
* Update GL_KHR_vulkan_glsl with 1) origin_upper_left as default 2)
specialization array constant semantics.
* Corrected/updated Data Format Specification date.
Jon Leech