* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
* Bump API patch number and header version number to 35 for this update.
Github Issues:
* Document in the <<memory-device-hostaccess,Host Access>> section that
mapping and unmapping does not invalidate or flush the mapped memory
(public issues 27, 126).
* Redefine the entire <<synchronization>> chapter in terms of consistent
and well defined terminology, that's called out at the start of the
chapter. This terminology is applied equally to all synchronization
types, including subpass dependencies, submissions, and much of the
implicit ordering stuff dotted around the spec. Key terms are laid out
in the <<synchronization-dependencies,Execution and Memory
Dependencies>> section at the top of the rewritten chapter (public
issues 128, 131, 132, 217, 299, 300, 302, 306, 322, 346, 347, 371, 407).
* Specify order of submission for batches in the
<<vkQueueSubmit,vkQueueSubmit>> and
<<vkQueueBindSparse,vkQueueBindSparse>> commands (public issue 371).
* Add valid usage statements to each of the WSI extension sections
indicating that the WSI-specific structure parameters must be valid, and
remove automatically generated valid usage statements now covered by the
manual sections (public issue 383).
* Clarify render pass compatibility for flink:vkCmdExecuteCommands (public
issue 390).
Internal Issues:
* Update +vk.xml+ to make previously explicit valid usage statements for
<<vkDebugReportMessageEXT,vkDebugReportMessageEXT>> implicit instead
(internal issue 553).
* Add valid usage statement for slink:VkCreateImageInfo preventing
creation of 1D sparse images (internal issue 573).
* Fix Python scripts to always read/write files in utf-8 encoding, and a
logic error in reflib.py which could cause a fatal error for
malstructured asciidoc (internal issues 578, 586).
* Bump API patch number and header version number to 34 for this update.
Github Issues:
* Allow vkUpdateDescriptorSets overflow to skip empty bindings. Clarify
that unused bindings have a descriptorCount of zero. Improve some valid
usage for vkUpdateDescriptorSets (public issue 256).
* Require that slink:VkImageSubresourceRange always define a non-empty
range of the resource (public issue 303).
* Added valid usage for slink:VkPresentInfoKHR on the layout of presented
images (public issue 397).
Internal Issues:
* Add dependency in src/spec/Makefile so specversion.txt is regenerated
when needed (internal issue 462).
* Shorten the table of contents in the single-page ref page HTML output.
Still working on the PDF (internal issue 536).
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
* Bump API patch number and header version number to 27 for this update.
Github Issues:
* Weaken flink:vkGetPipelineCacheData invariance conditions; previous
conditions were stronger than agreed and can't be guaranteed (public
issue 280).
* Add link to "Vulkan Loader Specification and Architecture Overview"
document to Normative References section (public issue 359).
Internal Issues:
* Be more clear in the <<interfaces-resources-layout-std140, uniform
buffer layout>> section that block offsets can be out of order
(internal issue 396).
* Document that extension authors should add support for their extensions
to the validation layers (internal issue 398).
* Clarify that the valid range of depth clear values should be limited
to the 0..1 range and that copies to depth aspect must also be in this
range (internal issue 412).
* Specify ``a'' vs. ``an'' use in the style guide (internal issue 432).
* Increase the maximum pname:nonCoherentAtomSize value in the
<<features-limits-required,Required Limits>> section from 128 to 256
(internal issue 435).
* Fix vk_platform.h for compiler errors on some Android platforms
(internal issue 441).
* Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures ==
`NULL` disables all features, including the "required" feature
pname:robustBufferAccess (internal issue 479).
Other Issues:
* Expand style guide and make it more self-consistent.
* Use ISO 8601 date format everywhere.
* Emphasise the correct way of using
slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount.
* Added +VK_EXT_validation_flags+ extension for validation flag mechanism.
* Fix an <<credits,author credit>> to include their current employer.
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
* Bump API patch number and header version number to 20 for this
update.
Github Issues:
* Replaced existing reference pages by text automatically extracted
from the specification source, or generated from vk.xml in some
cases. This isn't a complete solution for the reference pages, but
puts them in a much better state. The ref pages (only) are now
placed under a CC BY open source license, which is more current than
the obsolete license previously used.
Further improvements to the pages should not edit them directly, but
instead concentrate on the specification source from which the ref
pages are being extracted (public issues 44, 55, 160; internal issue
389).
Jon Leech