Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
# Vulkan Asciidoc Configuration Files
|
|
|
|
|
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
## Macros
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
The macros in `vulkan-macros.rb` and `vulkan-macros/extension.rb` are
|
|
|
|
|
described in the "Vulkan Documentation and Extensions: Procedures and
|
|
|
|
|
Conventions" document (see the [styleguide](../styleguide.txt)).
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
|
|
|
|
|
## Support for Math
|
|
|
|
|
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
Asciidoctor is customized to insert KaTeX `<script>` tags from
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
`math.js` for HTML5, and properly pass through math which has
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
`\begin{}\/end{}` delimiters instead of $$\[\]\(\).
|
|
|
|
|
|
|
|
|
|
For PDF builds, asciidoctor-mathematical is used to generate
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
|
|
|
|
|
`math-docbook.conf` is heavily conditionalized depending on whether the
|
|
|
|
|
final output format (which should be described in the a2x-format variable)
|
|
|
|
|
is `pdf` or not, since Docbook passes through math differently to dblatex
|
|
|
|
|
vs. the XHTML stylesheets. This could be simplified now that we're only
|
|
|
|
|
using Docbook for PDFs.
|