Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
// Copyright (c) 2015-2017 The Khronos Group Inc.
|
2016-02-16 09:53:44 +00:00
|
|
|
// Copyright notice at https://www.khronos.org/registry/speccopyright.html
|
|
|
|
|
|
|
|
|
|
[appendix]
|
|
|
|
|
[[spirvenv]]
|
Change log for April 29, 2016 Vulkan 1.0.12 spec update:
* Bump API patch number and header version number to 12 for this
update.
Github Issues:
* Change valid usage statements intended to be "sub-points" to
be actual sub-points (public issue 66).
* Replace double negation in description of
slink:VkRenderPassBeginInfo::pname:pClearValues (based on public
merge 142).
* Cleanup minor typos in spec, ref pages and XML, including those
proposed in public pull requests 144, 150, 151, 167, 168, 181, and
186.
* Use *strict subset* in describing the partial order of memory
property types for slink:VkMemoryType, and update the style guide
accordingly (public issue 190).
* Fix various "a image" -> "an image" typos (public issue 191).
* Note in the <<fundamentals-validusage,Valid Usage>> and
<<extensions-interactions,Extension Interactions>> sections that
structures defined by extensions which may be passed in structure
chains using the ptext:pNext member must: include initial
ptext:sType and ptext:pNext members (public issue 192).
Internal Issues:
* Remove duplicate language from the description of the pname:fence
parameter to flink:vkQueueSubmit and improve validity language
(internal issue 91).
* Added documentation for "optional" attribute to XML readme.tex/pdf
(internal issue 149).
* Clarify the host-side data validity rules and behavior of
flink:vkFlushMappedMemoryRanges and
flink:vkInvalidateMappedMemoryRanges (internal issue 266).
Other Commits:
* Added clarification to flink:vkCmdFillBuffer regarding the use of
ename:VK_WHOLE_SIZE.
* Fixed and documented implementation of "validextensionstructs"
attribute. in XML processing scripts and readme.tex/pdf.
* Add missing validity statements to flink:vkResetEvent and
flink:vkCmdResetEvent.
* Fix validity for the
ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT flag.
Correct all the draw/dispatch commands to mention optimally tiled
images as well as linear tiled images, and say image VIEWS instead
of images. Add validity statement to flink:vkCmdBlitImage
* Replace the {apiname} macro with hardcoded "Vulkan", now that we've
committed to that name.
* Add the VK_AMD_rasterization_order extension to vk.xml.
2016-04-29 12:53:46 +00:00
|
|
|
= Vulkan Environment for SPIR-V
|
2016-02-16 09:53:44 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Shaders for Vulkan are defined by the <<spirv-spec,Khronos SPIR-V
|
|
|
|
|
Specification>> as well as the <<spirv-extended,Khronos SPIR-V Extended
|
|
|
|
|
Instructions for GLSL>> Specification.
|
Change log for April 29, 2016 Vulkan 1.0.12 spec update:
* Bump API patch number and header version number to 12 for this
update.
Github Issues:
* Change valid usage statements intended to be "sub-points" to
be actual sub-points (public issue 66).
* Replace double negation in description of
slink:VkRenderPassBeginInfo::pname:pClearValues (based on public
merge 142).
* Cleanup minor typos in spec, ref pages and XML, including those
proposed in public pull requests 144, 150, 151, 167, 168, 181, and
186.
* Use *strict subset* in describing the partial order of memory
property types for slink:VkMemoryType, and update the style guide
accordingly (public issue 190).
* Fix various "a image" -> "an image" typos (public issue 191).
* Note in the <<fundamentals-validusage,Valid Usage>> and
<<extensions-interactions,Extension Interactions>> sections that
structures defined by extensions which may be passed in structure
chains using the ptext:pNext member must: include initial
ptext:sType and ptext:pNext members (public issue 192).
Internal Issues:
* Remove duplicate language from the description of the pname:fence
parameter to flink:vkQueueSubmit and improve validity language
(internal issue 91).
* Added documentation for "optional" attribute to XML readme.tex/pdf
(internal issue 149).
* Clarify the host-side data validity rules and behavior of
flink:vkFlushMappedMemoryRanges and
flink:vkInvalidateMappedMemoryRanges (internal issue 266).
Other Commits:
* Added clarification to flink:vkCmdFillBuffer regarding the use of
ename:VK_WHOLE_SIZE.
* Fixed and documented implementation of "validextensionstructs"
attribute. in XML processing scripts and readme.tex/pdf.
* Add missing validity statements to flink:vkResetEvent and
flink:vkCmdResetEvent.
* Fix validity for the
ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT flag.
Correct all the draw/dispatch commands to mention optimally tiled
images as well as linear tiled images, and say image VIEWS instead
of images. Add validity statement to flink:vkCmdBlitImage
* Replace the {apiname} macro with hardcoded "Vulkan", now that we've
committed to that name.
* Add the VK_AMD_rasterization_order extension to vk.xml.
2016-04-29 12:53:46 +00:00
|
|
|
This appendix defines additional SPIR-V requirements applying to Vulkan
|
2016-02-16 09:53:44 +00:00
|
|
|
shaders.
|
|
|
|
|
|
|
|
|
|
== Required Versions and Formats
|
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
A Vulkan 1.0 implementation must: support the 1.0 version of SPIR-V and the
|
|
|
|
|
1.0 version of the SPIR-V Extended Instructions for GLSL.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
A SPIR-V module passed into flink:vkCreateShaderModule is interpreted as a
|
|
|
|
|
series of 32-bit words in host endianness, with literal strings packed as
|
|
|
|
|
described in section 2.2 of the SPIR-V Specification.
|
|
|
|
|
The first few words of the SPIR-V module must: be a magic number and a
|
|
|
|
|
SPIR-V version number, as described in section 2.3 of the SPIR-V
|
|
|
|
|
Specification.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
[[spirvenv-capabilities]]
|
|
|
|
|
== Capabilities
|
|
|
|
|
|
|
|
|
|
Implementations must: support the following capability operands declared by
|
2016-04-21 08:08:38 +00:00
|
|
|
code:OpCapability:
|
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
* code:Matrix
|
|
|
|
|
* code:Shader
|
|
|
|
|
* code:InputAttachment
|
|
|
|
|
* code:Sampled1D
|
|
|
|
|
* code:Image1D
|
|
|
|
|
* code:SampledBuffer
|
|
|
|
|
* code:ImageBuffer
|
|
|
|
|
* code:ImageQuery
|
|
|
|
|
* code:DerivativeControl
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
Implementations may: support features that are not required: by the
|
|
|
|
|
Specification, as described in the <<features-features,Features>> chapter.
|
|
|
|
|
If such a feature is supported, then any capability operand(s) corresponding
|
|
|
|
|
to that feature must: also be supported.
|
|
|
|
|
|
|
|
|
|
[[spirvenv-capabilities-table]]
|
2016-12-02 11:32:05 +00:00
|
|
|
.SPIR-V Capabilities which are not required:, and corresponding feature or extension names
|
2016-02-16 09:53:44 +00:00
|
|
|
[options="header"]
|
|
|
|
|
|====
|
2016-12-02 11:32:05 +00:00
|
|
|
| SPIR-V OpCapability | Vulkan feature or extension name
|
2016-04-21 08:08:38 +00:00
|
|
|
| code:Geometry | <<features-features-geometryShader,geometryShader>>
|
|
|
|
|
| code:Tessellation | <<features-features-tessellationShader,tessellationShader>>
|
|
|
|
|
| code:Float64 | <<features-features-shaderFloat64,shaderFloat64>>
|
|
|
|
|
| code:Int64 | <<features-features-shaderInt64,shaderInt64>>
|
|
|
|
|
| code:Int16 | <<features-features-shaderInt16,shaderInt16>>
|
|
|
|
|
| code:TessellationPointSize | <<features-features-shaderTessellationAndGeometryPointSize,shaderTessellationAndGeometryPointSize>>
|
|
|
|
|
| code:GeometryPointSize | <<features-features-shaderTessellationAndGeometryPointSize,shaderTessellationAndGeometryPointSize>>
|
|
|
|
|
| code:ImageGatherExtended | <<features-features-shaderImageGatherExtended,shaderImageGatherExtended>>
|
|
|
|
|
| code:StorageImageMultisample | <<features-features-shaderStorageImageMultisample,shaderStorageImageMultisample>>
|
|
|
|
|
| code:UniformBufferArrayDynamicIndexing | <<features-features-shaderUniformBufferArrayDynamicIndexing,shaderUniformBufferArrayDynamicIndexing>>
|
|
|
|
|
| code:SampledImageArrayDynamicIndexing | <<features-features-shaderSampledImageArrayDynamicIndexing,shaderSampledImageArrayDynamicIndexing>>
|
|
|
|
|
| code:StorageBufferArrayDynamicIndexing | <<features-features-shaderStorageBufferArrayDynamicIndexing,shaderStorageBufferArrayDynamicIndexing>>
|
|
|
|
|
| code:StorageImageArrayDynamicIndexing | <<features-features-shaderStorageImageArrayDynamicIndexing,shaderStorageImageArrayDynamicIndexing>>
|
|
|
|
|
| code:ClipDistance | <<features-features-shaderClipDistance,shaderClipDistance>>
|
|
|
|
|
| code:CullDistance | <<features-features-shaderCullDistance,shaderCullDistance>>
|
|
|
|
|
| code:ImageCubeArray | <<features-features-imageCubeArray,imageCubeArray>>
|
|
|
|
|
| code:SampleRateShading | <<features-features-sampleRateShading,sampleRateShading>>
|
|
|
|
|
| code:SparseResidency | <<features-features-shaderResourceResidency,shaderResourceResidency>>
|
|
|
|
|
| code:MinLod | <<features-features-shaderResourceMinLod,shaderResourceMinLod>>
|
|
|
|
|
| code:SampledCubeArray | <<features-features-imageCubeArray,imageCubeArray>>
|
|
|
|
|
| code:ImageMSArray | <<features-features-shaderStorageImageMultisample,shaderStorageImageMultisample>>
|
|
|
|
|
| code:StorageImageExtendedFormats | <<features-features-shaderStorageImageExtendedFormats,shaderStorageImageExtendedFormats>>
|
|
|
|
|
| code:InterpolationFunction | <<features-features-sampleRateShading,sampleRateShading>>
|
|
|
|
|
| code:StorageImageReadWithoutFormat | <<features-features-shaderStorageImageReadWithoutFormat,shaderStorageImageReadWithoutFormat>>
|
|
|
|
|
| code:StorageImageWriteWithoutFormat | <<features-features-shaderStorageImageWriteWithoutFormat,shaderStorageImageWriteWithoutFormat>>
|
|
|
|
|
| code:MultiViewport | <<features-features-multiViewport,multiViewport>>
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
ifdef::VK_KHR_shader_draw_parameters[]
|
|
|
|
|
[[spirvenv-capabilities-table-drawparameters]]
|
|
|
|
|
| code:DrawParameters | <<VK_KHR_shader_draw_parameters,VK_KHR_shader_draw_parameters>>
|
|
|
|
|
endif::VK_KHR_shader_draw_parameters[]
|
|
|
|
|
ifdef::VK_EXT_shader_subgroup_ballot[]
|
|
|
|
|
[[spirvenv-capabilities-table-subgroupballot]]
|
|
|
|
|
| code:SubgroupBallotKHR | <<VK_EXT_shader_subgroup_ballot,VK_EXT_shader_subgroup_ballot>>
|
|
|
|
|
endif::VK_EXT_shader_subgroup_ballot[]
|
|
|
|
|
ifdef::VK_EXT_shader_subgroup_vote[]
|
|
|
|
|
[[spirvenv-capabilities-table-subgroupvote]]
|
|
|
|
|
| code:SubgroupVoteKHR | <<VK_EXT_shader_subgroup_vote,VK_EXT_shader_subgroup_vote>>
|
|
|
|
|
endif::VK_EXT_shader_subgroup_vote[]
|
2016-02-16 09:53:44 +00:00
|
|
|
|====
|
|
|
|
|
|
2016-08-28 10:47:19 +00:00
|
|
|
ifdef::VK_AMD_shader_explicit_vertex_parameter[]
|
|
|
|
|
The application can: pass a SPIR-V module to flink:vkCreateShaderModule that
|
|
|
|
|
uses the +SPV_AMD_shader_explicit_vertex_parameter+ SPIR-V extension.
|
|
|
|
|
endif::VK_AMD_shader_explicit_vertex_parameter[]
|
|
|
|
|
|
|
|
|
|
ifdef::VK_AMD_gcn_shader[]
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
The application can: pass a SPIR-V module to flink:vkCreateShaderModule that
|
|
|
|
|
uses the +SPV_AMD_gcn_shader+ SPIR-V extension.
|
2016-08-28 10:47:19 +00:00
|
|
|
endif::VK_AMD_gcn_shader[]
|
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
ifdef::VK_AMD_gpu_shader_half_float[]
|
|
|
|
|
The application can: pass a SPIR-V module to flink:vkCreateShaderModule that
|
|
|
|
|
uses the +SPV_AMD_gpu_shader_half_float+ SPIR-V extension.
|
|
|
|
|
endif::VK_AMD_gpu_shader_half_float[]
|
|
|
|
|
|
|
|
|
|
ifdef::VK_AMD_shader_ballot[]
|
|
|
|
|
The application can: pass a SPIR-V module to flink:vkCreateShaderModule that
|
|
|
|
|
uses the +SPV_AMD_shader_ballot+ SPIR-V extension.
|
|
|
|
|
endif::VK_AMD_shader_ballot[]
|
|
|
|
|
|
2016-08-28 10:47:19 +00:00
|
|
|
ifdef::VK_AMD_shader_trinary_minmax[]
|
|
|
|
|
The application can: pass a SPIR-V module to flink:vkCreateShaderModule that
|
|
|
|
|
uses the +SPV_AMD_shader_trinary_minmax+ SPIR-V extension.
|
|
|
|
|
endif::VK_AMD_shader_trinary_minmax[]
|
|
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
ifdef::VK_KHR_shader_draw_parameters[]
|
|
|
|
|
The application can: pass a SPIR-V module to flink:vkCreateShaderModule that
|
|
|
|
|
uses the +SPV_KHR_shader_draw_parameters+ SPIR-V extension.
|
|
|
|
|
endif::VK_KHR_shader_draw_parameters[]
|
|
|
|
|
|
|
|
|
|
ifdef::VK_EXT_shader_subgroup_ballot[]
|
|
|
|
|
The application can: pass a SPIR-V module to flink:vkCreateShaderModule that
|
|
|
|
|
uses the +SPV_KHR_shader_ballot+ SPIR-V extension.
|
|
|
|
|
endif::VK_EXT_shader_subgroup_ballot[]
|
|
|
|
|
|
|
|
|
|
ifdef::VK_EXT_shader_subgroup_vote[]
|
|
|
|
|
The application can: pass a SPIR-V module to flink:vkCreateShaderModule that
|
|
|
|
|
uses the +SPV_KHR_subgroup_vote+ SPIR-V extension.
|
|
|
|
|
endif::VK_EXT_shader_subgroup_vote[]
|
|
|
|
|
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
The application must: not pass a SPIR-V module containing any of the
|
2016-02-16 09:53:44 +00:00
|
|
|
following to flink:vkCreateShaderModule:
|
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
* any OpCapability not listed above,
|
|
|
|
|
* an unsupported capability, or
|
2016-12-02 11:32:05 +00:00
|
|
|
* a capability which corresponds to a Vulkan feature or extension which
|
|
|
|
|
has not been enabled.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
[[spirvenv-module-validation]]
|
|
|
|
|
== Validation Rules within a Module
|
|
|
|
|
|
|
|
|
|
A SPIR-V module passed to flink:vkCreateShaderModule must: conform to the
|
|
|
|
|
following rules:
|
|
|
|
|
|
|
|
|
|
* Every entry point must: have no return value and accept no arguments.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* Recursion: The static function-call graph for an entry point must: not
|
|
|
|
|
contain cycles.
|
2016-02-16 09:53:44 +00:00
|
|
|
* The *Logical* addressing model must: be selected.
|
|
|
|
|
* *Scope* for execution must: be limited to:
|
|
|
|
|
** *Workgroup*
|
|
|
|
|
** *Subgroup*
|
|
|
|
|
* *Scope* for memory must: be limited to:
|
|
|
|
|
** *Device*
|
|
|
|
|
** *Workgroup*
|
|
|
|
|
** *Invocation*
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* The code:OriginLowerLeft execution mode must: not be used; fragment
|
|
|
|
|
entry points must: declare code:OriginUpperLeft.
|
|
|
|
|
* The code:PixelCenterInteger execution mode must: not be used.
|
|
|
|
|
Pixels are always centered at half-integer coordinates.
|
2016-02-16 09:53:44 +00:00
|
|
|
* Images
|
2016-04-21 08:08:38 +00:00
|
|
|
** code:OpTypeImage must: declare a scalar 32-bit float or 32-bit integer
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
type for the "`Sampled Type`".
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
(code:RelaxedPrecision can: be applied to a sampling instruction and to
|
|
|
|
|
the variable holding the result of a sampling instruction.)
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
** code:OpSampledImage must: only consume an "`Image`" operand whose type
|
|
|
|
|
has its "`Sampled`" operand set to 1.
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
** The [eq]#(u,v)# coordinates used for a code:SubpassData must: be the
|
|
|
|
|
<id> of a constant vector [eq]#(0,0)#, or if a layer coordinate is
|
|
|
|
|
used, must: be a vector that was formed with constant 0 for the [eq]#u#
|
|
|
|
|
and [eq]#v# components.
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
** The "`Depth`" operand of code:OpTypeImage is ignored.
|
2016-02-16 09:53:44 +00:00
|
|
|
* Decorations
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
** The code:GLSLShared and code:GLSLPacked decorations must: not be used.
|
2016-02-16 09:53:44 +00:00
|
|
|
** The code:Flat, code:NoPerspective, code:Sample, and code:Centroid
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
decorations must: not be used on variables with storage class other
|
|
|
|
|
than code:Input or on variables used in the interface of non-fragment
|
|
|
|
|
shader entry points.
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
** The code:Patch decoration must: not be used on variables in the
|
2016-02-16 09:53:44 +00:00
|
|
|
interface of a vertex, geometry, or fragment shader stage's entry
|
|
|
|
|
point.
|
2016-04-21 08:08:38 +00:00
|
|
|
* code:OpTypeRuntimeArray must: only be used for the last member of an
|
|
|
|
|
code:OpTypeStruct in the code:Uniform storage class.
|
|
|
|
|
* Linkage: See <<interfaces,Shader Interfaces>> for additional linking and
|
2016-02-16 09:53:44 +00:00
|
|
|
validation rules.
|
2016-04-21 08:08:38 +00:00
|
|
|
* Compute Shaders
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
** For each compute shader entry point, either a code:LocalSize execution
|
|
|
|
|
mode or an object decorated with the code:WorkgroupSize decoration
|
|
|
|
|
must: be specified.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
[[spirvenv-precision-operation]]
|
|
|
|
|
== Precision and Operation of SPIR-V Instructions
|
|
|
|
|
|
|
|
|
|
The following rules apply to both single and double-precision floating point
|
|
|
|
|
instructions:
|
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
* Positive and negative infinities and positive and negative zeros are
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
generated as dictated by <<ieee-754,IEEE 754>>, but subject to the
|
|
|
|
|
precisions allowed in the following table.
|
2016-09-17 04:22:17 +00:00
|
|
|
* Dividing a non-zero by a zero results in the appropriately signed
|
|
|
|
|
<<ieee-754,IEEE 754>> infinity.
|
|
|
|
|
* Any denormalized value input into a shader or potentially generated by
|
2016-02-16 09:53:44 +00:00
|
|
|
any instruction in a shader may: be flushed to 0.
|
2016-09-17 04:22:17 +00:00
|
|
|
* The rounding mode cannot: be set and is undefined.
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
* [eq]##NaN##s may: not be generated.
|
|
|
|
|
Instructions that operate on a [eq]#NaN# may: not result in a [eq]#NaN#.
|
|
|
|
|
* Support for signaling [eq]##NaN##s is optional: and exceptions are never
|
|
|
|
|
raised.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
The precision of double-precision instructions is at least that of single
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
precision.
|
|
|
|
|
For single precision (32 bit) instructions, precisions are required: to be
|
|
|
|
|
at least as follows, unless decorated with RelaxedPrecision:
|
2016-02-16 09:53:44 +00:00
|
|
|
|
2016-02-27 13:20:49 +00:00
|
|
|
.Precision of core SPIR-V Instructions
|
2016-02-16 09:53:44 +00:00
|
|
|
[options="header"]
|
|
|
|
|
|====
|
2016-04-21 08:08:38 +00:00
|
|
|
| Instruction | Precision
|
|
|
|
|
| code:OpFAdd | Correctly rounded.
|
|
|
|
|
| code:OpFSub | Correctly rounded.
|
|
|
|
|
| code:OpFMul | Correctly rounded.
|
|
|
|
|
| code:OpFOrdEqual, code:OpFUnordEqual | Correct result.
|
|
|
|
|
| code:OpFOrdLessThan, code:OpFUnordLessThan | Correct result.
|
|
|
|
|
| code:OpFOrdGreaterThan, code:OpFUnordGreaterThan | Correct result.
|
|
|
|
|
| code:OpFOrdLessThanEqual, code:OpFUnordLessThanEqual | Correct result.
|
|
|
|
|
| code:OpFOrdGreaterThanEqual, code:OpFUnordGreaterThanEqual| Correct result.
|
|
|
|
|
| code:OpFDiv | 2.5 ULP for b in the range [2^-126^, 2^126^].
|
|
|
|
|
| conversions between types | Correctly rounded.
|
2016-02-16 09:53:44 +00:00
|
|
|
|====
|
|
|
|
|
|
Change log for July 15, 2016 Vulkan 1.0.21 spec update:
* Bump API patch number and header version number to 21 for this update.
Github Issues:
* Clarify how <<features-supported-sample-counts,sample count queries>>
relate to the limits in slink:VkPhysicalDeviceLimits. (public issue
185).
* Clarify in the <<interfaces-iointerfaces,Shader Input and Output
Interfaces>> section that shader output variables have undefined values
until the shader writes to them (public issue 240).
* Specify the implicit value of image parameters that cannot be set in
slink:VkSwapchainCreateInfo::pname:flags, pname:imageType,
pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout
(public issue 243).
* Make use of code:NULL and code:VK_NULL_HANDLE consistent in the
VK_KHR_swapchain extension (public issue 276).
Internal Issues:
* Clarify that presenting an image to a display surface swapchain applies
the display surface's mode, and that destroying a display surface
swapchain may reset the display's mode, in the VK_KHR_display_swapchain
extension (internal issue 247).
* Better describe what a slink:VkSurfaceKHR is, and that creating one does
not set a mode, in the VK_KHR_display extension. This is a round-about
way of pointing out that mode setting is not covered by the extension,
but rather is performed as a side effect of presentation (internal issue
247).
* Add more valid usage statements to flink:vkQueuePresentKHR command when
the VK_KHR_display_swapchain extension is present (internal issue
247).
* Add more includes to the VK_KHR_swapchain extension to better document
interactions with VK_KHR_display_swapchain (internal issue 247).
* Clarify restrictions on location aliasing in the
<<fxvertex,Fixed-Function Vertex Processing>> section (internal issue
370).
* Add mathematical description of blitting to flink:vkCmdBlitImage, and
link it to the <<textures,Image Operations>> chapter. Use mathematical
notation for ranges of texel coordinates in the <<textures,Image
Operations>> chapter. Fixed miscellaneous validity statements for
flink:vkCmdBlit and slink:VkImageBlit (internal issue 382).
Other Commits:
* Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the
ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when
tessellation shaders are used.
* Expand the style guide into a formal "Procedures and Conventions"
document. Add a API Naming Conventions section, move most of the API
Specification Appendix C (Layers and Extensions) content into the new
document, and define the resulting procedures as mandatory (where
relevant). This more clearly separates use vs. specification of Vulkan
APIs.
* Update vk_platform.h to handle 32-bit ARMv8 binaries.
* Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
|
|
|
.Precision of GLSL.std.450 Instructions
|
2016-02-16 09:53:44 +00:00
|
|
|
[options="header"]
|
|
|
|
|
|====
|
2016-04-21 08:08:38 +00:00
|
|
|
|Instruction | Precision
|
|
|
|
|
| code:fma() | Inherited from code:OpFMul followed by code:OpFAdd.
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
| code:exp(x), code:exp2(x) | [eq]#3 + 2 {times} {vert}x{vert}# ULP.
|
|
|
|
|
| code:log(), code:log2() | 3 ULP outside the range [eq]#[0.5, 2.0]#. Absolute error < [eq]#2^-21^# inside the range [eq]#[0.5, 2.0]#.
|
|
|
|
|
| code:pow(x, y) | Inherited from code:exp2(y {times} code:log2(x)).
|
2016-04-21 08:08:38 +00:00
|
|
|
| code:sqrt() | Inherited from 1.0 / code:inversesqrt().
|
|
|
|
|
| code:inversesqrt() | 2 ULP.
|
2016-02-16 09:53:44 +00:00
|
|
|
|====
|
|
|
|
|
|
|
|
|
|
GLSL.std.450 extended instructions specifically defined in terms of the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
above instructions inherit the above errors.
|
|
|
|
|
GLSL.std.450 extended instructions not listed above and not defined in terms
|
|
|
|
|
of the above have undefined precision.
|
|
|
|
|
These include, for example, the trigonometric functions and determinant.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
For the code:OpSRem and code:OpSMod instructions, if either operand is
|
|
|
|
|
negative the result is undefined.
|
|
|
|
|
|
|
|
|
|
[NOTE]
|
|
|
|
|
.Note
|
|
|
|
|
====
|
|
|
|
|
While the code:OpSRem and code:OpSMod instructions are supported by the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Vulkan environment, they require non-negative values and thus do not enable
|
|
|
|
|
additional functionality beyond what code:OpUMod provides.
|
2016-02-16 09:53:44 +00:00
|
|
|
====
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[[spirvenv-image-formats]]
|
2016-08-28 10:47:19 +00:00
|
|
|
.Compatibility Between SPIR-V Image Formats And Vulkan Formats
|
|
|
|
|
|
|
|
|
|
Images which are read from or written to by shaders must: have SPIR-V image
|
|
|
|
|
formats compatible with the Vulkan image formats backing the image under the
|
|
|
|
|
circumstances described for <<textures-operation-validation,texture image
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
validation>>.
|
|
|
|
|
The compatibile formats are:
|
2016-02-16 09:53:44 +00:00
|
|
|
|
2016-08-28 10:47:19 +00:00
|
|
|
.SPIR-V and Vulkan Image Format Compatibility
|
2016-02-16 09:53:44 +00:00
|
|
|
[cols="2*", options="header"]
|
2016-09-17 04:22:17 +00:00
|
|
|
|====
|
2016-08-28 10:47:19 +00:00
|
|
|
|SPIR-V Image Format |Compatible Vulkan Format
|
2016-02-16 09:53:44 +00:00
|
|
|
|code:Rgba32f |ename:VK_FORMAT_R32G32B32A32_SFLOAT
|
|
|
|
|
|code:Rgba16f |ename:VK_FORMAT_R16G16B16A16_SFLOAT
|
|
|
|
|
|code:R32f |ename:VK_FORMAT_R32_SFLOAT
|
|
|
|
|
|code:Rgba8 |ename:VK_FORMAT_R8G8B8A8_UNORM
|
|
|
|
|
|code:Rgba8Snorm |ename:VK_FORMAT_R8G8B8A8_SNORM
|
|
|
|
|
|code:Rg32f |ename:VK_FORMAT_R32G32_SFLOAT
|
|
|
|
|
|code:Rg16f |ename:VK_FORMAT_R16G16_SFLOAT
|
|
|
|
|
|code:R11fG11fB10f |ename:VK_FORMAT_B10G11R11_UFLOAT_PACK32
|
|
|
|
|
|code:R16f |ename:VK_FORMAT_R16_SFLOAT
|
|
|
|
|
|code:Rgba16 |ename:VK_FORMAT_R16G16B16A16_UNORM
|
|
|
|
|
|code:Rgb10A2 |ename:VK_FORMAT_A2B10G10R10_UNORM_PACK32
|
|
|
|
|
|code:Rg16 |ename:VK_FORMAT_R16G16_UNORM
|
|
|
|
|
|code:Rg8 |ename:VK_FORMAT_R8G8_UNORM
|
|
|
|
|
|code:R16 |ename:VK_FORMAT_R16_UNORM
|
|
|
|
|
|code:R8 |ename:VK_FORMAT_R8_UNORM
|
|
|
|
|
|code:Rgba16Snorm |ename:VK_FORMAT_R16G16B16A16_SNORM
|
|
|
|
|
|code:Rg16Snorm |ename:VK_FORMAT_R16G16_SNORM
|
|
|
|
|
|code:Rg8Snorm |ename:VK_FORMAT_R8G8_SNORM
|
|
|
|
|
|code:R16Snorm |ename:VK_FORMAT_R16_SNORM
|
|
|
|
|
|code:R8Snorm |ename:VK_FORMAT_R8_SNORM
|
|
|
|
|
|code:Rgba32i |ename:VK_FORMAT_R32G32B32A32_SINT
|
|
|
|
|
|code:Rgba16i |ename:VK_FORMAT_R16G16B16A16_SINT
|
|
|
|
|
|code:Rgba8i |ename:VK_FORMAT_R8G8B8A8_SINT
|
|
|
|
|
|code:R32i |ename:VK_FORMAT_R32_SINT
|
|
|
|
|
|code:Rg32i |ename:VK_FORMAT_R32G32_SINT
|
|
|
|
|
|code:Rg16i |ename:VK_FORMAT_R16G16_SINT
|
|
|
|
|
|code:Rg8i |ename:VK_FORMAT_R8G8_SINT
|
|
|
|
|
|code:R16i |ename:VK_FORMAT_R16_SINT
|
|
|
|
|
|code:R8i |ename:VK_FORMAT_R8_SINT
|
|
|
|
|
|code:Rgba32ui |ename:VK_FORMAT_R32G32B32A32_UINT
|
|
|
|
|
|code:Rgba16ui |ename:VK_FORMAT_R16G16B16A16_UINT
|
|
|
|
|
|code:Rgba8ui |ename:VK_FORMAT_R8G8B8A8_UINT
|
|
|
|
|
|code:R32ui |ename:VK_FORMAT_R32_UINT
|
|
|
|
|
|code:Rgb10a2ui |ename:VK_FORMAT_A2B10G10R10_UINT_PACK32
|
|
|
|
|
|code:Rg32ui |ename:VK_FORMAT_R32G32_UINT
|
|
|
|
|
|code:Rg16ui |ename:VK_FORMAT_R16G16_UINT
|
|
|
|
|
|code:Rg8ui |ename:VK_FORMAT_R8G8_UINT
|
|
|
|
|
|code:R16ui |ename:VK_FORMAT_R16_UINT
|
|
|
|
|
|code:R8ui |ename:VK_FORMAT_R8_UINT
|
2016-09-17 04:22:17 +00:00
|
|
|
|====
|
