Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
// Copyright (c) 2014-2017 The Khronos Group Inc.
|
2016-09-17 04:22:17 +00:00
|
|
|
// Copyright notice at https://www.khronos.org/registry/speccopyright.html
|
|
|
|
|
|
|
|
|
|
[[VK_KHR_display_swapchain]]
|
2016-08-28 10:47:19 +00:00
|
|
|
== VK_KHR_display_swapchain
|
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
*Name String*::
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
+VK_KHR_display_swapchain+
|
2016-09-17 04:22:17 +00:00
|
|
|
*Extension Type*::
|
|
|
|
|
Device extension
|
|
|
|
|
*Registered Extension Number*::
|
|
|
|
|
4
|
|
|
|
|
*Status*::
|
|
|
|
|
Draft.
|
|
|
|
|
*Last Modified Date*::
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
2015-11-10
|
2016-09-17 04:22:17 +00:00
|
|
|
*Revision*::
|
|
|
|
|
9
|
|
|
|
|
*IP Status*::
|
|
|
|
|
No known IP claims.
|
2016-08-28 10:47:19 +00:00
|
|
|
*Dependencies*::
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
- This extension is written against version 1.0 of the Vulkan API.
|
|
|
|
|
- Requires +VK_KHR_swapchain+.
|
|
|
|
|
- Requires +VK_KHR_display+.
|
2016-08-28 10:47:19 +00:00
|
|
|
*Contributors*::
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
- James Jones, NVIDIA
|
|
|
|
|
- Jeff Vigil, Qualcomm
|
|
|
|
|
- Jesse Hall, Google
|
2016-08-28 10:47:19 +00:00
|
|
|
*Contacts*::
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
- James Jones (jajones 'at' nvidia.com)
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
This extension provides an API to create a swapchain directly on a device's
|
|
|
|
|
display without any underlying window system.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
=== New Object Types
|
|
|
|
|
|
|
|
|
|
None
|
|
|
|
|
|
|
|
|
|
=== New Enum Constants
|
|
|
|
|
|
|
|
|
|
* Extending ename:VkStructureType:
|
|
|
|
|
** ename:VK_STRUCTURE_TYPE_DISPLAY_PRESENT_INFO_KHR
|
|
|
|
|
* Extending ename:VkResult:
|
|
|
|
|
** ename:VK_ERROR_INCOMPATIBLE_DISPLAY_KHR
|
|
|
|
|
|
|
|
|
|
=== New Enums
|
|
|
|
|
|
|
|
|
|
None
|
|
|
|
|
|
|
|
|
|
=== New Structures
|
|
|
|
|
|
|
|
|
|
* slink:VkDisplayPresentInfoKHR
|
|
|
|
|
|
|
|
|
|
=== New Functions
|
|
|
|
|
|
|
|
|
|
* flink:vkCreateSharedSwapchainsKHR
|
|
|
|
|
|
|
|
|
|
=== Issues
|
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
1) Should swapchains sharing images each hold a reference to the images, or
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
should it be up to the application to destroy the swapchains and images in
|
|
|
|
|
an order that avoids the need for reference counting?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
*PROPOSED RESOLUTION*: Take a reference.
|
|
|
|
|
The lifetime of presentable images is already complex enough.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
2) Should the srcRect/dstRect parameters be specified as part of the present
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
command, or at swapchain creation time?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
*PROPOSED RESOLUTION*: As part of the presentation command.
|
|
|
|
|
This allows moving and scaling the image on the screen without the need to
|
|
|
|
|
respecify the mode or create a new swapchain presentable images.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
3) Should srcRect/dstRect be specified as rects, or separate offset/extent
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
values?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
*PROPOSED RESOLUTION*: As rects.
|
|
|
|
|
Specifying them separately might make it easier for hardware to expose
|
|
|
|
|
support for one but not the other, but in such cases applications must just
|
|
|
|
|
take care to obey the reported capabilities and not use non-zero offsets or
|
|
|
|
|
extents that require scaling, as appropriate.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
4) How can applications create multiple swapchains that use the same images?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
RESOLUTION: By calling flink:vkCreateSharedSwapchainsKHR.
|
|
|
|
|
|
|
|
|
|
An earlier resolution used flink:vkCreateSwapchainKHR, chaining multiple
|
|
|
|
|
slink:VkSwapchainCreateInfoKHR structures through pname:pNext.
|
|
|
|
|
In order to allow each swapchain to also allow other extension structs, a
|
|
|
|
|
level of indirection was used: slink:VkSwapchainCreateInfoKHR::pname:pNext
|
|
|
|
|
pointed to a different structure, which had both an pname:sType/pname:pNext
|
|
|
|
|
for additional extensions, and also had a pointer to the next
|
|
|
|
|
slink:VkSwapchainCreateInfoKHR structure.
|
|
|
|
|
The number of swapchains to be created could only be found by walking this
|
|
|
|
|
linked list of alternating structures, and the pSwapchains out parameter was
|
|
|
|
|
reinterpreted to be an array of slink:VkSwapchainKHR handles.
|
|
|
|
|
|
|
|
|
|
Another option considered was a method to specify a ``shared'' swapchain
|
|
|
|
|
when creating a new swapchain, such that groups of swapchains using the same
|
|
|
|
|
images could be built up one at a time.
|
|
|
|
|
This was deemed unusable because drivers need to know all of the displays an
|
|
|
|
|
image will be used on when determining which internal formats and layouts to
|
|
|
|
|
use for that image.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
=== Examples
|
|
|
|
|
|
|
|
|
|
**Example 1**
|
|
|
|
|
|
|
|
|
|
Create a swapchain on a display mode and plane
|
|
|
|
|
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
[source,c++]
|
2016-08-28 10:47:19 +00:00
|
|
|
----------------------------------------
|
|
|
|
|
// See VK_KHR_display for an example of how to pick a display,
|
|
|
|
|
// display mode, plane, and how to create a VkSurfaceKHR for
|
|
|
|
|
// that plane.
|
|
|
|
|
extern VkPhysicalDevice physDevice;
|
|
|
|
|
extern VkDisplayModePropertiesKHR myModeProps;
|
|
|
|
|
extern VkSurfaceKHR mySurface;
|
|
|
|
|
extern VkDevice device;
|
|
|
|
|
|
|
|
|
|
uint32_t queueCount, i;
|
|
|
|
|
uint32_t presentQueueFamilyIndex = UINT32_MAX;
|
|
|
|
|
VkBool32 supportsPresent;
|
|
|
|
|
|
|
|
|
|
// Find a queue family that supports presenting to this surface
|
|
|
|
|
uint32_t familyCount;
|
|
|
|
|
vkGetPhysicalDeviceQueueFamilyProperties(physDevice, &familyCount, NULL);
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < familyCount; ++i)
|
|
|
|
|
{
|
|
|
|
|
vkGetPhysicalDeviceSurfaceSupportKHR(physDevice, i, mySurface, &supportsPresent);
|
|
|
|
|
|
|
|
|
|
if (supportsPresent) {
|
|
|
|
|
// Found a queue family that supports present. See
|
|
|
|
|
// VK_KHR_surface for an example of how to find a queue that
|
|
|
|
|
// supports both presentation and graphics
|
|
|
|
|
presentQueueFamilyIndex = i;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Figure out which formats and present modes this surface supports.
|
|
|
|
|
uint32_t formatCount;
|
|
|
|
|
vkGetPhysicalDeviceSurfaceFormatsKHR(physDevice, mySurface, &formatCount, NULL);
|
|
|
|
|
|
|
|
|
|
VkSurfaceFormatKHR* formats = (VkSurfaceFormatKHR*)malloc(sizeof(VkSurfaceFormatKHR) * formatCount);
|
|
|
|
|
vkGetPhysicalDeviceSurfaceFormatsKHR(physDevice, mySurface, &formatCount, formats);
|
|
|
|
|
|
|
|
|
|
const VkSwapchainCreateInfoKHR createInfo =
|
|
|
|
|
{
|
|
|
|
|
VK_STRUCTURE_TYPE_SWAPCHAIN_CREATE_INFO_KHR, // sType
|
|
|
|
|
NULL, // pNext
|
|
|
|
|
0, // flags
|
|
|
|
|
mySurface, // surface
|
|
|
|
|
3, // minImageCount
|
|
|
|
|
formats[0].format, // imageFormat
|
|
|
|
|
formats[0].colorSpace, // imageColorSpace
|
|
|
|
|
myModeProps.parameters.visibleRegion, // imageExtent
|
|
|
|
|
1, // imageArrayLayers
|
|
|
|
|
VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT, // imageUsage
|
|
|
|
|
VK_SHARING_MODE_EXCLUSIVE, // imageSharingMode
|
|
|
|
|
0, // queueFamilyIndexCount
|
|
|
|
|
NULL, // pQueueFamilyIndices
|
|
|
|
|
VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR, // preTransform
|
|
|
|
|
VK_COMPOSITE_ALPHA_OPAQUE_BIT_KHR, // compositeAlpha
|
|
|
|
|
VK_PRESENT_MODE_FIFO_KHR, // presentMode
|
|
|
|
|
VK_TRUE, // clipped
|
|
|
|
|
VK_NULL_HANDLE // oldSwapchain
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
VkSwapchainKHR swapchain;
|
|
|
|
|
// This is equivalent to vkCreateSwapchainKHR.
|
|
|
|
|
vkCreateSharedSwapchainsKHR(device, 1, &createInfo, NULL, &swapchain);
|
|
|
|
|
----------------------------------------
|
|
|
|
|
|
|
|
|
|
=== Version History
|
|
|
|
|
|
|
|
|
|
* Revision 1, 2015-07-29 (James Jones)
|
|
|
|
|
- Initial draft
|
|
|
|
|
|
|
|
|
|
* Revision 2, 2015-08-21 (Ian Elliott)
|
|
|
|
|
- Renamed this extension and all of its enumerations, types, functions,
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
etc.
|
|
|
|
|
This makes it compliant with the proposed standard for Vulkan
|
2016-08-28 10:47:19 +00:00
|
|
|
extensions.
|
|
|
|
|
- Switched from "revision" to "version", including use of the
|
|
|
|
|
VK_MAKE_VERSION macro in the header file.
|
|
|
|
|
|
|
|
|
|
* Revision 3, 2015-09-01 (James Jones)
|
|
|
|
|
- Restore single-field revision number.
|
|
|
|
|
|
|
|
|
|
* Revision 4, 2015-09-08 (James Jones)
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
- Allow creating multiple swap chains that share the same images using a
|
|
|
|
|
single call to vkCreateSwapChainKHR().
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
* Revision 5, 2015-09-10 (Alon Or-bach)
|
|
|
|
|
- Removed underscores from SWAP_CHAIN in two enums.
|
|
|
|
|
|
|
|
|
|
* Revision 6, 2015-10-02 (James Jones)
|
|
|
|
|
- Added support for smart panels/buffered displays.
|
|
|
|
|
|
|
|
|
|
* Revision 7, 2015-10-26 (Ian Elliott)
|
|
|
|
|
- Renamed from VK_EXT_KHR_display_swapchain to VK_KHR_display_swapchain.
|
|
|
|
|
|
|
|
|
|
* Revision 8, 2015-11-03 (Daniel Rakos)
|
|
|
|
|
- Updated sample code based on the changes to VK_KHR_swapchain.
|
|
|
|
|
|
|
|
|
|
* Revision 9, 2015-11-10 (Jesse Hall)
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
- Replaced ftext:VkDisplaySwapchainCreateInfoKHR with
|
|
|
|
|
vkCreateSharedSwapchainsKHR, changing resolution of issue #4.
|