2019-10-06 12:42:12 -07:00
|
|
|
include::{generated}/meta/VK_EXT_shader_subgroup_ballot.txt[]
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-17 20:11:25 -08:00
|
|
|
|
|
|
|
|
*Last Modified Date*::
|
|
|
|
|
2016-11-28
|
|
|
|
|
*IP Status*::
|
|
|
|
|
No known IP claims.
|
Change log for September 5, 2017 Vulkan 1.0.60 spec update:
* Bump API patch number and header version number to 60 for this update.
Github Issues:
* Document that <<queries-timestamps, Timestamp Queries>> can only be
meaningfully compared when they are written from the same queue (public
issue 216).
* Document that the `<extension>` tag `type` attribute is required for
non-disabled extensions (derived from, but does not close public issue
354).
* Clean up registry schema length attribute descriptions to be consistent
and correct (public issue 555).
Internal Issues:
* Replace as much of the hand-written extension appendix metadata as
possible with asciidoc includes generated from corresponding attributes
of +vk.xml+, and enhance the style guide to match. This avoids
inconsistencies between +vk.xml+ and the appendices, and produces a more
uniform style (internal issue 137).
* Remove the generated extDependency.{py,sh} files from the tree and
create them dynamically on demand instead, reducing merge conflicts
(internal issue 713).
* Add a prototype tool for generating in-place difference markup for
sections guarded by asciidoc conditionals, and new syntax for open
blocks to support it (internal issue 833).
* Remove unnecessary restriction of etext:*SYNC_FD_BIT_KHR external handle
types to the same physical device in the
slink:VkPhysicalDeviceIDPropertiesKHR,
flink:VkImportMemoryWin32HandleInfoKHR,
slink:VkImportFenceWin32HandleInfoKHR, slink:VkImportFenceFdInfoKHR,
slink:VkImportSemaphoreWin32HandleInfoKHR,
slink:VkImportSemaphoreFdInfoKHR
<<external-memory-handle-types-compatibility, External memory handle
types compatibility>>, <<external-semaphore-handle-types-compatibility,
External semaphore handle types compatibility>>, and
<<external-fence-handle-types-compatibility, External fence handle types
compatibility>> sections (internal issue 956).
Other Issues:
* Remove dependency of +VK_KHX_device_group+ on +VK_KHR_swapchain+ (there
is an interaction, but not a strict dependency), and add a new
`extension` attribute to the `<require` XML tag to allow classifying a
subset of interfaces of an extension as requiring another extension.
Update the registry schema and documentation accordingly.
New Extensions:
* `VK_AMD_shader_fragment_mask` (and related `GL_AMD_shader_fragment_mask`
GLSL extension)
* `VK_EXT_sample_locations`
* `VK_EXT_validation_cache`
2017-09-04 03:06:55 -07:00
|
|
|
*Interactions and External Dependencies*::
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-17 20:11:25 -08:00
|
|
|
- This extension requires the
|
Change log for August 17, 2019 Vulkan 1.1.120 spec update:
* Update release number to 120.
Github Issues:
* Add slink:VkAccelerationStructureTypeNV explicitly to extension XML for
`<<VK_NV_ray_tracing>>` (public issue 848).
* Add missing valid usage statements for feature flags in
slink:VkCommandBufferInheritanceInfo (public pull request 1017).
Internal Issues:
* Clarify behavior of non-premultiplied destination colors for
`<<VK_EXT_blend_operation_advanced>>` prior to the definition of
slink:VkBlendOverlapEXT (internal issue 1766).
* Fix the confusing phrasing "`no other queue must: be (doing something)`"
for flink:vkQueuePresentKHR, flink:vkQueueSubmit, and
flink:vkQueueBindSparse (internal issue 1774).
* Add `<<VK_EXT_validation_features>>` flag to enable best practices
checks, which will soon be available in the validation layer (internal
issue 1779).
* Specify allowed characters for VUID tag name components in the style
guide (internal issue 1788).
* Update links to SPIR-V extension specifications, and parameterize their
markup in case the URLs change in the future (internal issue 1797).
* Fix an off-by-one error in the valid usage statement for
slink:VkPipelineExecutableInfoKHR (internal merge request 3303).
* Clean up markup indentation not matching the style guide (internal merge
request 3314).
* Minor script updates to allow refpage aliases, generate a dynamic TOC
for refpages, generate Apache rewrite rules for aliases, open external
links from refpages in a new window, and synchronize with the OpenCL
scripts. This will shortly enable a paned navigation setup for refpages,
similar to the OpenCL 2.2 refpages (internal merge request 3322).
* Script updates to add tests to the checker, refactor and reformat code,
generate better text for some valid usage statements, use more Pythonic
idioms, and synchronize with the OpenXR scripts (internal merge request
3239).
* Script updates and minor fixes in spec language to not raise checker
errors for refpage markup of pages not existing in the API, such as
VKAPI_NO_STDINT_H. Remove corresponding suppression of some
check_spec_links.py tests from .gitlab-ci.yml and 'allchecks' target
(internal merge request 3315).
2019-08-17 15:33:21 -07:00
|
|
|
{spirv}/KHR/SPV_KHR_shader_ballot.html[`SPV_KHR_shader_ballot`] SPIR-V
|
|
|
|
|
extension.
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-17 20:11:25 -08:00
|
|
|
- This extension requires the
|
Change log for January 13, 2019 Vulkan 1.1.98 spec update:
* Update release number to 98.
Public Issues:
* Fix missing markup in flink:vkDestroyPipelineLayout valid usage
statement (pull request 882).
* Add missing contributors for `<<VK_EXT_buffer_device_address>>` (public
pull request 891).
Internal Issues:
* Detect nested bullet points in valid usage blocks and warn about them
during VUID assignment (internal issue 1382).
* Update the style guide to document the process for reserving new bits in
bitmask types (internal issue 1411).
* Clarify for slink:VkApplicationInfo::pname:apiVersion and in the
<<fundamentals-validusage-versions, Valid Usage for Newer Core
Versions>> section when it is valid for an application to use a certain
version of Vulkan API functionality (for an instance and for a
device/physical device); and when the validation layers must generate an
error (internal issue 1412).
* Add optional <<memory-model-availability-visibility, transitive
availability/visibility operations to the memory model, including a new
pname:vulkanMemoryModelAvailabilityVisibilityChains feature for
slink:VkPhysicalDeviceVulkanMemoryModelFeaturesKHR (internal issue
1460).
* Add the code:StorageBuffer storage class to those in the
<<interfaces-resources-descset, Descriptor Set Interface>> (internal
issue 1480).
* Add missing `returnedonly` tags for a number of returned extension
structures that can be passed in pname:pNext chains (internal issue
1515).
* Clean up and rearrange some spec language for
slink:VkRenderPassCreateInfo and slink:VkAttachmentReference.txt
(internal issue 1522).
* Correctly round the code:OpVectorTimesScalar and
code:OpMatrixTimesScalar SPIR-V operations in the <<Precision of core
SPIR-V Instructions>> table (internal merge request 2996).
* Work around cases in flink:vkCmdBeginTransformFeedbackEXT,
flink:vkCmdEndTransformFeedbackEXT, and
slink:VkPipelineCoverageModulationStateCreateInfoNV where an array
parameter is `optional` but the length is not in `vk.xml`. This is an
interim fix using `noautovalidity` + handcoded VU replacing those that
should be autogenerated (internal issue 2944 and
https://github.com/KhronosGroup/Vulkan-ValidationLayers/issues/480).
* Remove redundant capability validation of the code:float16 and code:int8
SPIR-V capabilities from the <<spirvenv-capabilities, Capabilities>>
section, since they are already covered in the preceding table.
* Update check_spec_links script, including validation for reference page
open blocks. Fix errors identified by the script.
2019-01-13 05:53:27 -08:00
|
|
|
https://www.khronos.org/registry/OpenGL/extensions/ARB/ARB_shader_ballot.txt[`GL_ARB_shader_ballot`]
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-17 20:11:25 -08:00
|
|
|
extension for GLSL source languages.
|
|
|
|
|
*Contributors*::
|
|
|
|
|
- Jeff Bolz, NVIDIA
|
|
|
|
|
- Neil Henning, Codeplay
|
|
|
|
|
- Daniel Koch, NVIDIA Corporation
|
2017-07-11 17:57:41 -07:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-17 20:11:25 -08:00
|
|
|
This extension adds support for the following SPIR-V extension in Vulkan:
|
|
|
|
|
|
Change log for January 13, 2019 Vulkan 1.1.98 spec update:
* Update release number to 98.
Public Issues:
* Fix missing markup in flink:vkDestroyPipelineLayout valid usage
statement (pull request 882).
* Add missing contributors for `<<VK_EXT_buffer_device_address>>` (public
pull request 891).
Internal Issues:
* Detect nested bullet points in valid usage blocks and warn about them
during VUID assignment (internal issue 1382).
* Update the style guide to document the process for reserving new bits in
bitmask types (internal issue 1411).
* Clarify for slink:VkApplicationInfo::pname:apiVersion and in the
<<fundamentals-validusage-versions, Valid Usage for Newer Core
Versions>> section when it is valid for an application to use a certain
version of Vulkan API functionality (for an instance and for a
device/physical device); and when the validation layers must generate an
error (internal issue 1412).
* Add optional <<memory-model-availability-visibility, transitive
availability/visibility operations to the memory model, including a new
pname:vulkanMemoryModelAvailabilityVisibilityChains feature for
slink:VkPhysicalDeviceVulkanMemoryModelFeaturesKHR (internal issue
1460).
* Add the code:StorageBuffer storage class to those in the
<<interfaces-resources-descset, Descriptor Set Interface>> (internal
issue 1480).
* Add missing `returnedonly` tags for a number of returned extension
structures that can be passed in pname:pNext chains (internal issue
1515).
* Clean up and rearrange some spec language for
slink:VkRenderPassCreateInfo and slink:VkAttachmentReference.txt
(internal issue 1522).
* Correctly round the code:OpVectorTimesScalar and
code:OpMatrixTimesScalar SPIR-V operations in the <<Precision of core
SPIR-V Instructions>> table (internal merge request 2996).
* Work around cases in flink:vkCmdBeginTransformFeedbackEXT,
flink:vkCmdEndTransformFeedbackEXT, and
slink:VkPipelineCoverageModulationStateCreateInfoNV where an array
parameter is `optional` but the length is not in `vk.xml`. This is an
interim fix using `noautovalidity` + handcoded VU replacing those that
should be autogenerated (internal issue 2944 and
https://github.com/KhronosGroup/Vulkan-ValidationLayers/issues/480).
* Remove redundant capability validation of the code:float16 and code:int8
SPIR-V capabilities from the <<spirvenv-capabilities, Capabilities>>
section, since they are already covered in the preceding table.
* Update check_spec_links script, including validation for reference page
open blocks. Fix errors identified by the script.
2019-01-13 05:53:27 -08:00
|
|
|
* `SPV_KHR_shader_ballot`
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-17 20:11:25 -08:00
|
|
|
|
|
|
|
|
This extension provides the ability for a group of invocations, which
|
|
|
|
|
execute in parallel, to do limited forms of cross-invocation communication
|
|
|
|
|
via a group broadcast of a invocation value, or broadcast of a bitarray
|
|
|
|
|
representing a predicate value from each invocation in the group.
|
|
|
|
|
|
|
|
|
|
This extension provides access to a number of additional built-in shader
|
|
|
|
|
variables in Vulkan:
|
|
|
|
|
|
|
|
|
|
* code:SubgroupEqMaskKHR, which contains the subgroup mask of the current
|
|
|
|
|
subgroup invocation,
|
|
|
|
|
* code:SubgroupGeMaskKHR, which contains the subgroup mask of the
|
|
|
|
|
invocations greater than or equal to the current invocation,
|
|
|
|
|
* code:SubgroupGtMaskKHR, which contains the subgroup mask of the
|
|
|
|
|
invocations greater than the current invocation,
|
|
|
|
|
* code:SubgroupLeMaskKHR, which contains the subgroup mask of the
|
|
|
|
|
invocations less than or equal to the current invocation,
|
|
|
|
|
* code:SubgroupLtMaskKHR, which contains the subgroup mask of the
|
|
|
|
|
invocations less than the current invocation,
|
|
|
|
|
* code:SubgroupLocalInvocationId, which contains the index of an
|
|
|
|
|
invocation within a subgroup, and
|
|
|
|
|
* code:SubgroupSize, which contains the maximum number of invocations in a
|
|
|
|
|
subgroup.
|
|
|
|
|
|
|
|
|
|
Additionally, this extension provides access to the new SPIR-V instructions:
|
|
|
|
|
|
|
|
|
|
* code:OpSubgroupBallotKHR,
|
|
|
|
|
* code:OpSubgroupFirstInvocationKHR, and
|
|
|
|
|
* code:OpSubgroupReadInvocationKHR,
|
|
|
|
|
|
|
|
|
|
When using GLSL source-based shader languages, the following variables and
|
|
|
|
|
shader functions from GL_ARB_shader_ballot can map to these SPIR-V built-in
|
|
|
|
|
decorations and instructions:
|
|
|
|
|
|
2017-11-09 00:09:27 +01:00
|
|
|
* `in uint64_t gl_SubGroupEqMaskARB;` -> code:SubgroupEqMaskKHR,
|
|
|
|
|
* `in uint64_t gl_SubGroupGeMaskARB;` -> code:SubgroupGeMaskKHR,
|
|
|
|
|
* `in uint64_t gl_SubGroupGtMaskARB;` -> code:SubgroupGtMaskKHR,
|
|
|
|
|
* `in uint64_t gl_SubGroupLeMaskARB;` -> code:SubgroupLeMaskKHR,
|
|
|
|
|
* `in uint64_t gl_SubGroupLtMaskARB;` -> code:SubgroupLtMaskKHR,
|
|
|
|
|
* `in uint gl_SubGroupInvocationARB;` -> code:SubgroupLocalInvocationId,
|
|
|
|
|
* `uniform uint gl_SubGroupSizeARB;` -> code:SubgroupSize,
|
|
|
|
|
* code:ballotARB() -> code:OpSubgroupBallotKHR,
|
|
|
|
|
* code:readFirstInvocationARB() -> code:OpSubgroupFirstInvocationKHR, and
|
|
|
|
|
* code:readInvocationARB() -> code:OpSubgroupReadInvocationKHR.
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-17 20:11:25 -08:00
|
|
|
|
|
|
|
|
=== New Object Types
|
|
|
|
|
|
|
|
|
|
None.
|
|
|
|
|
|
|
|
|
|
=== New Enum Constants
|
|
|
|
|
|
|
|
|
|
None.
|
|
|
|
|
|
|
|
|
|
=== New Enums
|
|
|
|
|
|
|
|
|
|
None.
|
|
|
|
|
|
|
|
|
|
=== New Structures
|
|
|
|
|
|
|
|
|
|
None.
|
|
|
|
|
|
|
|
|
|
=== New Functions
|
|
|
|
|
|
|
|
|
|
None.
|
|
|
|
|
|
|
|
|
|
=== New Built-In Variables
|
|
|
|
|
|
|
|
|
|
* <<interfaces-builtin-variables-sgeq,code:SubgroupEqMaskKHR>>
|
|
|
|
|
* <<interfaces-builtin-variables-sgge,code:SubgroupGeMaskKHR>>
|
|
|
|
|
* <<interfaces-builtin-variables-sggt,code:SubgroupGtMaskKHR>>
|
|
|
|
|
* <<interfaces-builtin-variables-sgle,code:SubgroupLeMaskKHR>>
|
|
|
|
|
* <<interfaces-builtin-variables-sglt,code:SubgroupLtMaskKHR>>
|
|
|
|
|
* <<interfaces-builtin-variables-sgli,code:SubgroupLocalInvocationId>>
|
|
|
|
|
* <<interfaces-builtin-variables-sgs,code:SubgroupSize>>
|
|
|
|
|
|
|
|
|
|
=== New SPIR-V Capabilities
|
|
|
|
|
|
|
|
|
|
* <<spirvenv-capabilities-table-subgroupballot,SubgroupBallotKHR>>
|
|
|
|
|
|
|
|
|
|
=== Issues
|
|
|
|
|
|
|
|
|
|
None.
|
|
|
|
|
|
|
|
|
|
=== Version History
|
|
|
|
|
|
|
|
|
|
* Revision 1, 2016-11-28 (Daniel Koch)
|
|
|
|
|
- Initial draft
|
