Change log for September 5, 2017 Vulkan 1.0.60 spec update:
* Bump API patch number and header version number to 60 for this update.
Github Issues:
* Document that <<queries-timestamps, Timestamp Queries>> can only be
meaningfully compared when they are written from the same queue (public
issue 216).
* Document that the `<extension>` tag `type` attribute is required for
non-disabled extensions (derived from, but does not close public issue
354).
* Clean up registry schema length attribute descriptions to be consistent
and correct (public issue 555).
Internal Issues:
* Replace as much of the hand-written extension appendix metadata as
possible with asciidoc includes generated from corresponding attributes
of +vk.xml+, and enhance the style guide to match. This avoids
inconsistencies between +vk.xml+ and the appendices, and produces a more
uniform style (internal issue 137).
* Remove the generated extDependency.{py,sh} files from the tree and
create them dynamically on demand instead, reducing merge conflicts
(internal issue 713).
* Add a prototype tool for generating in-place difference markup for
sections guarded by asciidoc conditionals, and new syntax for open
blocks to support it (internal issue 833).
* Remove unnecessary restriction of etext:*SYNC_FD_BIT_KHR external handle
types to the same physical device in the
slink:VkPhysicalDeviceIDPropertiesKHR,
flink:VkImportMemoryWin32HandleInfoKHR,
slink:VkImportFenceWin32HandleInfoKHR, slink:VkImportFenceFdInfoKHR,
slink:VkImportSemaphoreWin32HandleInfoKHR,
slink:VkImportSemaphoreFdInfoKHR
<<external-memory-handle-types-compatibility, External memory handle
types compatibility>>, <<external-semaphore-handle-types-compatibility,
External semaphore handle types compatibility>>, and
<<external-fence-handle-types-compatibility, External fence handle types
compatibility>> sections (internal issue 956).
Other Issues:
* Remove dependency of +VK_KHX_device_group+ on +VK_KHR_swapchain+ (there
is an interaction, but not a strict dependency), and add a new
`extension` attribute to the `<require` XML tag to allow classifying a
subset of interfaces of an extension as requiring another extension.
Update the registry schema and documentation accordingly.
New Extensions:
* `VK_AMD_shader_fragment_mask` (and related `GL_AMD_shader_fragment_mask`
GLSL extension)
* `VK_EXT_sample_locations`
* `VK_EXT_validation_cache`
2017-09-04 10:06:55 +00:00
|
|
|
include::meta/VK_EXT_debug_report.txt[]
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
*Last Modified Date*::
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
2017-04-27
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
*IP Status*::
|
|
|
|
|
No known IP claims.
|
|
|
|
|
*Contributors*::
|
|
|
|
|
- Courtney Goeltzenleuchter, LunarG
|
|
|
|
|
- Dan Ginsburg, Valve
|
|
|
|
|
- Jon Ashburn, LunarG
|
2016-12-11 04:59:58 +00:00
|
|
|
- Mark Lobodzinski, LunarG
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Due to the nature of the Vulkan interface, there is very little error
|
|
|
|
|
information available to the developer and application.
|
2017-12-20 17:00:32 +00:00
|
|
|
By enabling optional validation layers and using the `VK_EXT_debug_report`
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
extension, developers can: obtain much more detailed feedback on the
|
|
|
|
|
application's use of Vulkan.
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
This extension defines a way for layers and the implementation to call back
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
to the application for events of interest to the application.
|
|
|
|
|
|
|
|
|
|
=== New Object Types
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
* slink:VkDebugReportCallbackEXT
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
=== New Enum Constants
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* Extending elink:VkStructureType:
|
|
|
|
|
** ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CALLBACK_CREATE_INFO_EXT
|
|
|
|
|
* Extending elink:VkResult:
|
|
|
|
|
** ename:VK_ERROR_VALIDATION_FAILED_EXT
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
=== New Enums
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* elink:VkDebugReportFlagBitsEXT
|
|
|
|
|
* elink:VkDebugReportObjectTypeEXT
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
=== New Structures
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* slink:VkDebugReportCallbackCreateInfoEXT
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
=== New Functions
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* flink:vkCreateDebugReportCallbackEXT
|
|
|
|
|
* flink:vkDestroyDebugReportCallbackEXT
|
|
|
|
|
* flink:vkDebugReportMessageEXT
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
=== New Function Pointers
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* tlink:PFN_vkDebugReportCallbackEXT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
=== Examples
|
|
|
|
|
|
2017-12-20 17:00:32 +00:00
|
|
|
`VK_EXT_debug_report` allows an application to register multiple callbacks
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
with the validation layers.
|
|
|
|
|
Some callbacks may log the information to a file, others may cause a debug
|
|
|
|
|
break point or other application defined behavior.
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
An application can: register callbacks even when no validation layers are
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
enabled, but they will only be called for loader and, if implemented, driver
|
|
|
|
|
events.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
To capture events that occur while creating or destroying an instance an
|
|
|
|
|
application can: link a slink:VkDebugReportCallbackCreateInfoEXT structure
|
|
|
|
|
to the pname:pNext element of the slink:VkInstanceCreateInfo structure given
|
|
|
|
|
to flink:vkCreateInstance.
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
This callback is only valid for the duration of the flink:vkCreateInstance
|
|
|
|
|
and the flink:vkDestroyInstance call.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Use flink:vkCreateDebugReportCallbackEXT to create persistent callback
|
|
|
|
|
objects.
|
|
|
|
|
|
|
|
|
|
Example uses: Create three callback objects.
|
|
|
|
|
One will log errors and warnings to the debug console using Windows
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
code:OutputDebugString.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
The second will cause the debugger to break at that callback when an error
|
|
|
|
|
happens and the third will log warnings to stdout.
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
[source,c++]
|
2016-08-28 10:47:19 +00:00
|
|
|
------------------------------------------------------------------------------
|
|
|
|
|
VkResult res;
|
|
|
|
|
VkDebugReportCallbackEXT cb1, cb2, cb3;
|
|
|
|
|
|
|
|
|
|
VkDebugReportCallbackCreateInfoEXT callback1 = {
|
|
|
|
|
VK_STRUCTURE_TYPE_DEBUG_REPORT_CALLBACK_CREATE_INFO_EXT, // sType
|
|
|
|
|
NULL, // pNext
|
|
|
|
|
VK_DEBUG_REPORT_ERROR_BIT_EXT | // flags
|
|
|
|
|
VK_DEBUG_REPORT_WARNING_BIT_EXT,
|
|
|
|
|
myOutputDebugString, // pfnCallback
|
|
|
|
|
NULL // pUserData
|
|
|
|
|
};
|
|
|
|
|
res = vkCreateDebugReportCallbackEXT(instance, &callback1, &cb1);
|
|
|
|
|
if (res != VK_SUCCESS)
|
|
|
|
|
/* Do error handling for VK_ERROR_OUT_OF_MEMORY */
|
|
|
|
|
|
|
|
|
|
callback.flags = VK_DEBUG_REPORT_ERROR_BIT_EXT;
|
|
|
|
|
callback.pfnCallback = myDebugBreak;
|
|
|
|
|
callback.pUserData = NULL;
|
|
|
|
|
res = vkCreateDebugReportCallbackEXT(instance, &callback, &cb2);
|
|
|
|
|
if (res != VK_SUCCESS)
|
|
|
|
|
/* Do error handling for VK_ERROR_OUT_OF_MEMORY */
|
|
|
|
|
|
|
|
|
|
VkDebugReportCallbackCreateInfoEXT callback3 = {
|
|
|
|
|
VK_STRUCTURE_TYPE_DEBUG_REPORT_CALLBACK_CREATE_INFO_EXT, // sType
|
|
|
|
|
NULL, // pNext
|
|
|
|
|
VK_DEBUG_REPORT_WARNING_BIT_EXT, // flags
|
|
|
|
|
mystdOutLogger, // pfnCallback
|
|
|
|
|
NULL // pUserData
|
|
|
|
|
};
|
|
|
|
|
res = vkCreateDebugReportCallbackEXT(instance, &callback3, &cb3);
|
|
|
|
|
if (res != VK_SUCCESS)
|
|
|
|
|
/* Do error handling for VK_ERROR_OUT_OF_MEMORY */
|
|
|
|
|
|
|
|
|
|
...
|
|
|
|
|
|
|
|
|
|
/* remove callbacks when cleaning up */
|
|
|
|
|
vkDestroyDebugReportCallbackEXT(instance, cb1);
|
|
|
|
|
vkDestroyDebugReportCallbackEXT(instance, cb2);
|
|
|
|
|
vkDestroyDebugReportCallbackEXT(instance, cb3);
|
|
|
|
|
------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
[NOTE]
|
|
|
|
|
.Note
|
|
|
|
|
====
|
2017-12-20 17:00:32 +00:00
|
|
|
In the initial release of the `VK_EXT_debug_report` extension, the token
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CREATE_INFO_EXT was used.
|
|
|
|
|
Starting in version 2 of the extension branch,
|
2016-08-28 10:47:19 +00:00
|
|
|
ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CALLBACK_CREATE_INFO_EXT is used
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
instead for consistency with Vulkan naming rules.
|
|
|
|
|
The older enum is still available for backwards compatibility.
|
|
|
|
|
====
|
|
|
|
|
|
|
|
|
|
[NOTE]
|
|
|
|
|
.Note
|
|
|
|
|
====
|
2017-12-20 17:00:32 +00:00
|
|
|
In the initial release of the `VK_EXT_debug_report` extension, the token
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
ename:VK_DEBUG_REPORT_OBJECT_TYPE_DEBUG_REPORT_EXT was used.
|
|
|
|
|
Starting in version 8 of the extension branch,
|
|
|
|
|
ename:VK_DEBUG_REPORT_OBJECT_TYPE_DEBUG_REPORT_CALLBACK_EXT_EXT is used
|
|
|
|
|
instead for consistency with Vulkan naming rules.
|
|
|
|
|
The older enum is still available for backwards compatibility.
|
2016-08-28 10:47:19 +00:00
|
|
|
====
|
|
|
|
|
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
|
|
|
|
|
=== Issues
|
|
|
|
|
|
2017-11-08 23:09:27 +00:00
|
|
|
1) What is the hierarchy / seriousness of the message flags? E.g.
|
|
|
|
|
etext:ERROR > etext:WARN > etext:PERF_WARN ...
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
|
2017-07-12 00:57:41 +00:00
|
|
|
*RESOLVED*: There is no specific hierarchy.
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
Each bit is independent and should be checked via bitwise AND.
|
|
|
|
|
For example:
|
|
|
|
|
|
|
|
|
|
[source,c++]
|
|
|
|
|
----------------------------------------
|
|
|
|
|
if (localFlags & VK_DEBUG_REPORT_ERROR_BIT_EXT) {
|
|
|
|
|
process error message
|
|
|
|
|
}
|
|
|
|
|
if (localFlags & VK_DEBUG_REPORT_DEBUG_BIT_EXT) {
|
|
|
|
|
process debug message
|
|
|
|
|
}
|
|
|
|
|
----------------------------------------
|
|
|
|
|
|
2017-11-08 23:09:27 +00:00
|
|
|
The validation layers do use them in a hierarchical way (etext:ERROR >
|
|
|
|
|
etext:WARN > etext:PERF, etext:WARN > etext:DEBUG > etext:INFO) and they (at
|
|
|
|
|
least at the time of this writing) only set one bit at a time.
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
But it is not a requirement of this extension.
|
|
|
|
|
|
|
|
|
|
It is possible that a layer may intercept and change, or augment the flags
|
|
|
|
|
with extension values the application's debug report handler may not be
|
2017-12-15 20:01:02 +00:00
|
|
|
familiar with, so it is important to treat each flag independently.
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
|
|
|
|
|
2) Should there be a VU requiring
|
2017-11-08 23:09:27 +00:00
|
|
|
slink:VkDebugReportCallbackCreateInfoEXT::pname:flags to be non-zero?
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
|
2017-07-12 00:57:41 +00:00
|
|
|
*RESOLVED*: It may not be very useful, but we do not need VU statement
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
requiring the sname:VkDebugReportCallbackCreateInfoEXT::pname:msgFlags at
|
2017-12-15 20:01:02 +00:00
|
|
|
create-time to be non-zero.
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
One can imagine that apps may prefer it as it allows them to set the mask as
|
|
|
|
|
desired - including nothing - at runtime without having to check.
|
|
|
|
|
|
|
|
|
|
3) What is the difference between ename:VK_DEBUG_REPORT_DEBUG_BIT_EXT and
|
2017-07-12 00:57:41 +00:00
|
|
|
ename:VK_DEBUG_REPORT_INFORMATION_BIT_EXT?
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
|
2017-07-12 00:57:41 +00:00
|
|
|
*RESOLVED*: ename:VK_DEBUG_REPORT_DEBUG_BIT_EXT indicates information that
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
could be useful debugging the Vulkan implementation itself.
|
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
=== Version History
|
|
|
|
|
|
2016-12-11 04:59:58 +00:00
|
|
|
* Revision 1, 2015-05-20 (Courtney Goetzenleuchter)
|
|
|
|
|
- Initial draft, based on LunarG KHR spec, other KHR specs
|
|
|
|
|
|
|
|
|
|
* Revision 2, 2016-02-16 (Courtney Goetzenleuchter)
|
|
|
|
|
- Update usage, documentation
|
|
|
|
|
|
|
|
|
|
* Revision 3, 2016-06-14 (Courtney Goetzenleuchter)
|
|
|
|
|
- Update VK_EXT_DEBUG_REPORT_SPEC_VERSION to indicate added support for
|
|
|
|
|
vkCreateInstance and vkDestroyInstance
|
|
|
|
|
|
|
|
|
|
* Revision 4, 2016-12-08 (Mark Lobodzinski)
|
|
|
|
|
- Added Display_KHR, DisplayModeKHR extension objects
|
|
|
|
|
- Added ObjectTable_NVX, IndirectCommandsLayout_NVX extension objects
|
|
|
|
|
- Bumped spec revision
|
|
|
|
|
- Retroactively added version history
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
|
|
|
|
|
* Revision 5, 2017-01-31 (Baldur Karlsson)
|
2017-06-05 03:48:43 +00:00
|
|
|
- Moved definition of elink:VkDebugReportObjectTypeEXT from debug marker
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
chapter
|
2017-03-31 23:06:31 +00:00
|
|
|
|
|
|
|
|
* Revision 6, 2017-01-31 (Baldur Karlsson)
|
|
|
|
|
- Added VK_DEBUG_REPORT_OBJECT_TYPE_DESCRIPTOR_UPDATE_TEMPLATE_KHR_EXT
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
|
|
|
|
|
* Revision 7, 2017-04-20 (Courtney Goeltzenleuchter)
|
|
|
|
|
- Clarify wording and address questions from developers.
|
|
|
|
|
|
|
|
|
|
* Revision 8, 2017-04-21 (Courtney Goeltzenleuchter)
|
|
|
|
|
- Remove unused enum VkDebugReportErrorEXT
|
