Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
# Vulkan Asciidoc Configuration Files
|
|
|
|
|
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
## Macros
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
The macros in `vulkan-macros.rb` and `vulkan-macros/extension.rb` are
|
|
|
|
|
described in the "Vulkan Documentation and Extensions: Procedures and
|
|
|
|
|
Conventions" document (see the [styleguide](../styleguide.txt)).
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
|
|
|
|
|
## Support for Math
|
|
|
|
|
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
Asciidoctor is customized to insert KaTeX `<script>` tags from
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
`math.js` for HTML5, and properly pass through math which has
|
Change log for February 10, 2017 Vulkan 1.0.40 spec update:
* Bump API patch number and header version number to 40 for this update.
* There is a major build change in this release. We are now using the
Ruby-based ``asciidoctor'' implementation, rather than the Python-based
``asciidoc'' implementation, to process the specification. While the
actual specification markup changes were minimal, this requires a new
set of build tools and a very different installation process, especially
because we now use an experimental direct-to-PDF backend for Asciidoctor
instead of Docbook->dblatex->PDF. It is no longer possible to build the
Specification using asciidoc. See doc/specs/vulkan/README.adoc
for some guidance on installing the new toolchain components.
* There are some minor rendering issues in the PDF output due to teething
problems with the asciidoctor toolchain, especially with mathematical
equations. We are aware of these and working on them.
Github Issues:
* Updated sample code for the <<sparsememory-examples-basic,sparse
resource binding example>> (public issue 97).
* Modify line and point clipping behavior in the
<<vertexpostproc-clipping, Primitive Clipping>> section to allow for
pop-free behavior. The ability to check for which behavior is
implemented may be added a future feature or extension (public issue
113).
* Unify the discussions of implicit ordering throughout the spec, in
particular in the new sections <<drawing-primitive-order, Primitive
Order>>, <<primrast-order, Rasterization Order>>, and
<<synchronization-implicit, Implicit Synchronization Guarantees>>; the
discussion of <<synchronization-submission-order, submission order>>;
and references elsewhere to these sections (public issue 133).
* Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>>
language and introduce the term ``identically defined'' (public issue
164).
* Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to
reuse the object type enum from +VK_EXT_debug_report+, and moves the
definition of that enum into +VK_EXT_debug_report+ where it should be
(public issue 409).
* Remove redundant valid usage statement from slink:VkImageBlit (public
issue 421).
* Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a
specialization constant (public issue 424).
* Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue
426).
* Correct typo in New Objects list for <<VK_EXT_debug_report>> (public
issue 447).
Internal Issues:
* Moved to asciidoctor for spec builds (internal issue 121).
* Update style guide to describe where to put new extensions-specific
asciidoc files, and what to name them (internal issue 626).
* Add src/spec/indexExt.py to autogenerate registry index entries linking
into the 1.0-extensions specification, instead of maintaining the index
manually. (internal issue 642).
* Autogenerate extension dependencies and lists of all extensions and all
KHR extensions from the "supported" attributes in +vk.xml+. Execute
+make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported
extension is added to vk.xml, to regenerate the dependency script. The
consequence is that specifying a single extension to the +makeExt+
script will automatically enable all extensions it depends on as well,
and that the +makeAllExts+ and +makeKHR+ scripts do not need to be
updated when a new extension is supported (internal issue 648).
* Put extension appendices all at the same asciidoc section level, so KHR
WSI extensions show up in the HTML index (internal issue 648).
Other Issues:
* Imbed images in the generated HTML specs instead of loading them from
the images/ directory.
* Fix missing EXT in extension name
(ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME).
* Add new +VK_EXT_SMPTE_2086_metadata+ extension.
* In the <<platformCreateSurface_xlib,Xlib Surface>> section of the
+VK_KHR_xlib_surface+ specification, add language warning users that
they always need to call code:XinitThreads.
* Use the term "presentable image" (rather than "swapchain image")
consistently in +VK_KHR_swapchain+ and related extensions, and add a
glossary term defining it.
* Relocate the valid usage for samples of
flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo
to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR
structure.
2017-02-11 04:37:39 +00:00
|
|
|
`\begin{}\/end{}` delimiters instead of $$\[\]\(\).
|
|
|
|
|
|
Change log for March 7, 2018 Vulkan 1.1.70 spec update:
* Vulkan 1.1 initial release. Bump API patch number and header version
number to 70 for this update. The patch number will be used for both
Vulkan 1.1 and Vulkan 1.0 updates, and continues to increment
continuously from the previous Vulkan 1.0.69 update.
NOTE: We are not publishing an updated 1.0.70 specification, or 1.1
reference pages, along with 1.1.70. There are still minor issues to work
out with those build targets. However, we will soon generate all three
types of documents as part of the regular spec update cycle.
NOTE: The GitHub KhronosGroup/Vulkan-Docs repository now maintains the
current specification in the `master` branch. The `1.0` branch is out of
date and will not be maintained, since we will be generating both 1.1
and 1.0 specifications from the `master` branch in the future.
Github Issues:
* Clarify how mapped memory ranges are flushed in
flink:vkFlushMappedMemoryRanges (public issue 127).
* Specify that <<synchronization-pipeline-stages, Pipeline Stages>> are a
list of tasks that each command performs, rather than necessarily being
discrete pieces of hardware that one task flows through. Add a
"`synchronization command`" pipeline type which all synchronization
command execute (it's just TOP + BOTTOM), with an explanatory note
(public issue 554).
Internal Issues:
* Regenerate all images used in the spec in Inkscape with a consistent
look-and-feel, and adjust image size attributes so they're all legible,
and not too large with respect to the spec body text (internal issue
701).
* Document in the <<extensions,extensions>> appendix and in the style
guide that `KHX` extensions are no longer supported or used in the
Vulkan 1.1 timeframe (internal issue 714).
* Remove the leftover equations_temp directory after PDF build completes
(internal issue 925).
* Update the <<credits, Credits (Informative)>> appendix to include
contributors to Vulkan 1.1, and to list them according to the API
version(s) they contributed to (internal issue 987).
* Add a NOTE to the introduction explaining that interfaces defined by
extensions which were promoted to Vulkan 1.1 are now expressed as
aliases of the Vulkan 1.1 type (internal issue 991).
* Instrument spec source conditionals so spec can be built with 1.1
features, extensions promoted to 1.1, or both (internal issues 992,
998).
* Modify the XML schema and tools to support explicit aliasing of types,
structures, and commands, and use this to express the promotion of 1.0
extensions to 1.1 core features, by making the extension interfaces
aliases of the core features they were promoted to. Mark up promoted
interfaces to allow still generating 1.0 + extension specifications
(internal issue 991).
* Platform names, along with corresponding preprocessor symbols to enable
extensions specific to those platforms, are now reserved in vk.xml using
the <platform> tag. Update the registry schema and schema specification
to match (internal issue 1011).
* Updated the <<textures-texel-replacement, Texel Replacement>> section to
clarify that reads from invalid texels for image resources result in
undefined values (internal issue 1014).
* Modify description of patch version so it continues to increment across
minor version changes (internal issue 1033).
* Clarify and unify language describing physical device-level core and
extension functionality in the <<fundamentals-validusage-extensions,
Valid Usage for Extensions>>, <<fundamentals-validusage-versions, Valid
Usage for Newer Core Versions>>, <<initialization-functionpointers
Command Function Pointers>>, <<initialization-phys-dev-extensions,
Extending Physical Device From Device Extensions>>
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> sections and for
flink:vkGetPhysicalDeviceImageFormatProperties2. This documents that
instance-level functionality is tied to the loader, and independent of
the ICD; physical device-level functionality is tied to the ICD, and
associated with device extensions; physical devices are treated more
uniformly between core and extensions; and instance and physical
versions can be different (internal issue 1048).
* Updated the <<commandbuffers-lifecycle, Command Buffer Lifecycle>>
section to clarify the ability for pending command buffers to transition
to the invalid state after submission, and add a command buffer
lifecycle diagram (internal issue 1050).
* Clarify that some flink:VkDescriptorUpdateTemplateCreateInfo parameters
are ignored when push descriptors are not supported (internal issue
1054).
* Specify that flink:vkCreateImage will return an error if the image is
too large, in a NOTE in the slink:VkImageFormatProperties description
(internal issue 1078).
* Remove near-duplicate NOTEs about when to query function pointers
dynamically in the <<initialization, Initialization>> chapter and
replace by extending the NOTE in the <<fundamentals-abi, Application
Binary Interface>> section (internal issue 1085).
* Restore missing references to "`Sparse Resource Features`" in the
flink:VkBufferCreateFlagBits description (internal issue 1086).
* Tidy up definitions of descriptor types in the `GL_KHR_vulkan_glsl`
specification, the <<descriptorsets, Resource Descriptors>> section and
its subsections, and the <<interfaces-resources-descset, Descriptor Set
Interface>> for consistency, reduction of duplicate information, and
removal of GLSL correspondance/examples (internal issue 1090).
* Correctly describe code:PrimitiveId as an Input for tessellation control
and evaluation shaders, not an Output (internal issue 1109).
* Relax the requirements on chroma offsets for nearest filtering in
<<textures-implict-reconstruction, Implicit Reconstruction>> (internal
issue 1116).
Other Issues:
* Clarify the intended relationship between specification language and
certain terms defined in the Khronos Intellectual Property Rights
policy. Specific changes include:
** Rewrote IP/Copyright preamble and introduction to better agree with
normative language both as laid out in the introduction, and the
Khronos IPR policy.
** Added notion of fully informative sections, which are now tagged with
"`(Informative)`" in their titles.
** Removed non-normative uses of the phrase "`not required`"
** Clarified the distinction between terms "`optional`" and "`not
required:`" as they relate to the IPR Policy, and updated specification
text to use terms consistent with the intent.
** Reduced additions to RFC 2119, and ensured the specification agreed
with the leaner language.
** Removed the terms "`hardware`", "`software`", "`CPU`", and "`GPU`" from
normative text.
** Moved several paragraphs that should not have been normative to
informative notes.
** Clarified a number of definitions in the Glossary.
** Updated the document writing guide to match new terminology changes.
* Explicitly state in the <<fundamentals-objectmodel-lifetime-acquire,
application memory lifetime>> language that that for objects other than
descriptor sets, a slink:VkDescriptorSetLayout object used in the
creation of another object (such as slink:VkPipelineLayout or
slink:VkDescriptorUpdateTemplateKHR) is only in use during the creation
of that object and can be safely destroyed afterwards.
* Updated the <<textures-scale-factor, Scale Factor Operation>> section to
use the ratio of anisotropy, rather than the integer sample rate, to
perform the LOD calculation. The spec still allows use of the sample
rate as the value used to calculate the LOD, but no longer requires it.
* Update `vulkan_ext.c` to include all platform-related definitions from
the Vulkan platform headers, following the split of the headers into
platform-specific and non-platform-specific files.
* Fix bogus anchor name in the <<commandbuffers, Command Buffers>> chapter
which accidentally duplicated an anchor in the pipelines chapter. There
were no reference to this anchor, fortunately.
* Add valid usage statement for slink:VkWriteDescriptorSet and
slink:VkCopyDescriptorSet requiring that the slink:VkDescriptorSetLayout
used to allocate the source and destination sets must not have been
destroyed at the time flink:vkUpdateDescriptorSets is called.
* Document mapping of subgroup barrier functions to SPIR-V, and clarify a
place where subgroupBarrier sounds like it's execution-only in the
standalone `GL_KHR_shader_subgroup` specification.
* Use an HTML stylesheet derived from the Asciidoctor `colony` theme, with
the default Arial font family replaced by the sans-serif Noto font
family.
* Numerous minor updates to README.adoc, build scripts, Makefiles, and
registry and style guide specifications to support Vulkan 1.1 outputs,
use them as defaults, and remove mention of `KHX` extensions, which are
no longer supported.
New Extensions:
* `VK_EXT_vertex_attrib_divisor`
2018-03-07 12:18:52 +00:00
|
|
|
For PDF builds, asciidoctor-mathematical is used to generate
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
|
|
|
|
|
`math-docbook.conf` is heavily conditionalized depending on whether the
|
|
|
|
|
final output format (which should be described in the a2x-format variable)
|
|
|
|
|
is `pdf` or not, since Docbook passes through math differently to dblatex
|
|
|
|
|
vs. the XHTML stylesheets. This could be simplified now that we're only
|
|
|
|
|
using Docbook for PDFs.
|
Change log for March 7, 2018 Vulkan 1.1.70 spec update:
* Vulkan 1.1 initial release. Bump API patch number and header version
number to 70 for this update. The patch number will be used for both
Vulkan 1.1 and Vulkan 1.0 updates, and continues to increment
continuously from the previous Vulkan 1.0.69 update.
NOTE: We are not publishing an updated 1.0.70 specification, or 1.1
reference pages, along with 1.1.70. There are still minor issues to work
out with those build targets. However, we will soon generate all three
types of documents as part of the regular spec update cycle.
NOTE: The GitHub KhronosGroup/Vulkan-Docs repository now maintains the
current specification in the `master` branch. The `1.0` branch is out of
date and will not be maintained, since we will be generating both 1.1
and 1.0 specifications from the `master` branch in the future.
Github Issues:
* Clarify how mapped memory ranges are flushed in
flink:vkFlushMappedMemoryRanges (public issue 127).
* Specify that <<synchronization-pipeline-stages, Pipeline Stages>> are a
list of tasks that each command performs, rather than necessarily being
discrete pieces of hardware that one task flows through. Add a
"`synchronization command`" pipeline type which all synchronization
command execute (it's just TOP + BOTTOM), with an explanatory note
(public issue 554).
Internal Issues:
* Regenerate all images used in the spec in Inkscape with a consistent
look-and-feel, and adjust image size attributes so they're all legible,
and not too large with respect to the spec body text (internal issue
701).
* Document in the <<extensions,extensions>> appendix and in the style
guide that `KHX` extensions are no longer supported or used in the
Vulkan 1.1 timeframe (internal issue 714).
* Remove the leftover equations_temp directory after PDF build completes
(internal issue 925).
* Update the <<credits, Credits (Informative)>> appendix to include
contributors to Vulkan 1.1, and to list them according to the API
version(s) they contributed to (internal issue 987).
* Add a NOTE to the introduction explaining that interfaces defined by
extensions which were promoted to Vulkan 1.1 are now expressed as
aliases of the Vulkan 1.1 type (internal issue 991).
* Instrument spec source conditionals so spec can be built with 1.1
features, extensions promoted to 1.1, or both (internal issues 992,
998).
* Modify the XML schema and tools to support explicit aliasing of types,
structures, and commands, and use this to express the promotion of 1.0
extensions to 1.1 core features, by making the extension interfaces
aliases of the core features they were promoted to. Mark up promoted
interfaces to allow still generating 1.0 + extension specifications
(internal issue 991).
* Platform names, along with corresponding preprocessor symbols to enable
extensions specific to those platforms, are now reserved in vk.xml using
the <platform> tag. Update the registry schema and schema specification
to match (internal issue 1011).
* Updated the <<textures-texel-replacement, Texel Replacement>> section to
clarify that reads from invalid texels for image resources result in
undefined values (internal issue 1014).
* Modify description of patch version so it continues to increment across
minor version changes (internal issue 1033).
* Clarify and unify language describing physical device-level core and
extension functionality in the <<fundamentals-validusage-extensions,
Valid Usage for Extensions>>, <<fundamentals-validusage-versions, Valid
Usage for Newer Core Versions>>, <<initialization-functionpointers
Command Function Pointers>>, <<initialization-phys-dev-extensions,
Extending Physical Device From Device Extensions>>
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> sections and for
flink:vkGetPhysicalDeviceImageFormatProperties2. This documents that
instance-level functionality is tied to the loader, and independent of
the ICD; physical device-level functionality is tied to the ICD, and
associated with device extensions; physical devices are treated more
uniformly between core and extensions; and instance and physical
versions can be different (internal issue 1048).
* Updated the <<commandbuffers-lifecycle, Command Buffer Lifecycle>>
section to clarify the ability for pending command buffers to transition
to the invalid state after submission, and add a command buffer
lifecycle diagram (internal issue 1050).
* Clarify that some flink:VkDescriptorUpdateTemplateCreateInfo parameters
are ignored when push descriptors are not supported (internal issue
1054).
* Specify that flink:vkCreateImage will return an error if the image is
too large, in a NOTE in the slink:VkImageFormatProperties description
(internal issue 1078).
* Remove near-duplicate NOTEs about when to query function pointers
dynamically in the <<initialization, Initialization>> chapter and
replace by extending the NOTE in the <<fundamentals-abi, Application
Binary Interface>> section (internal issue 1085).
* Restore missing references to "`Sparse Resource Features`" in the
flink:VkBufferCreateFlagBits description (internal issue 1086).
* Tidy up definitions of descriptor types in the `GL_KHR_vulkan_glsl`
specification, the <<descriptorsets, Resource Descriptors>> section and
its subsections, and the <<interfaces-resources-descset, Descriptor Set
Interface>> for consistency, reduction of duplicate information, and
removal of GLSL correspondance/examples (internal issue 1090).
* Correctly describe code:PrimitiveId as an Input for tessellation control
and evaluation shaders, not an Output (internal issue 1109).
* Relax the requirements on chroma offsets for nearest filtering in
<<textures-implict-reconstruction, Implicit Reconstruction>> (internal
issue 1116).
Other Issues:
* Clarify the intended relationship between specification language and
certain terms defined in the Khronos Intellectual Property Rights
policy. Specific changes include:
** Rewrote IP/Copyright preamble and introduction to better agree with
normative language both as laid out in the introduction, and the
Khronos IPR policy.
** Added notion of fully informative sections, which are now tagged with
"`(Informative)`" in their titles.
** Removed non-normative uses of the phrase "`not required`"
** Clarified the distinction between terms "`optional`" and "`not
required:`" as they relate to the IPR Policy, and updated specification
text to use terms consistent with the intent.
** Reduced additions to RFC 2119, and ensured the specification agreed
with the leaner language.
** Removed the terms "`hardware`", "`software`", "`CPU`", and "`GPU`" from
normative text.
** Moved several paragraphs that should not have been normative to
informative notes.
** Clarified a number of definitions in the Glossary.
** Updated the document writing guide to match new terminology changes.
* Explicitly state in the <<fundamentals-objectmodel-lifetime-acquire,
application memory lifetime>> language that that for objects other than
descriptor sets, a slink:VkDescriptorSetLayout object used in the
creation of another object (such as slink:VkPipelineLayout or
slink:VkDescriptorUpdateTemplateKHR) is only in use during the creation
of that object and can be safely destroyed afterwards.
* Updated the <<textures-scale-factor, Scale Factor Operation>> section to
use the ratio of anisotropy, rather than the integer sample rate, to
perform the LOD calculation. The spec still allows use of the sample
rate as the value used to calculate the LOD, but no longer requires it.
* Update `vulkan_ext.c` to include all platform-related definitions from
the Vulkan platform headers, following the split of the headers into
platform-specific and non-platform-specific files.
* Fix bogus anchor name in the <<commandbuffers, Command Buffers>> chapter
which accidentally duplicated an anchor in the pipelines chapter. There
were no reference to this anchor, fortunately.
* Add valid usage statement for slink:VkWriteDescriptorSet and
slink:VkCopyDescriptorSet requiring that the slink:VkDescriptorSetLayout
used to allocate the source and destination sets must not have been
destroyed at the time flink:vkUpdateDescriptorSets is called.
* Document mapping of subgroup barrier functions to SPIR-V, and clarify a
place where subgroupBarrier sounds like it's execution-only in the
standalone `GL_KHR_shader_subgroup` specification.
* Use an HTML stylesheet derived from the Asciidoctor `colony` theme, with
the default Arial font family replaced by the sans-serif Noto font
family.
* Numerous minor updates to README.adoc, build scripts, Makefiles, and
registry and style guide specifications to support Vulkan 1.1 outputs,
use them as defaults, and remove mention of `KHX` extensions, which are
no longer supported.
New Extensions:
* `VK_EXT_vertex_attrib_divisor`
2018-03-07 12:18:52 +00:00
|
|
|
|
|
|
|
|
## Stylesheets
|
|
|
|
|
|
|
|
|
|
`khronos.css` is the stylesheet used for HTML output.
|