Vulkan-Docs/doc/specs/vulkan/chapters/descriptorsets.txt

// Copyright (c) 2015-2016 The Khronos Group Inc.
// Copyright notice at https://www.khronos.org/registry/speccopyright.html

[[descriptorsets]]
= Resource Descriptors

Shaders access buffer and image resources by using special shader variables
which are indirectly bound to buffer and image views via the API. These
variables are organized into sets, where each set of bindings is represented
by a _descriptor set_ object in the API and a descriptor set is bound all at
once. A _descriptor_ is an opaque data structure representing a shader
resource such as a buffer view, image view, sampler, or combined image
sampler. The content of each set is determined by its _descriptor set
layout_ and the sequence of set layouts that can: be used by resource
variables in shaders within a pipeline is specified in a _pipeline layout_.

Each shader can: use up to pname:maxBoundDescriptorSets (see
<<features-limits, Limits>>) descriptor sets, and each descriptor set can:
include bindings for descriptors of all descriptor types. Each shader
resource variable is assigned a tuple of (set number, binding number, array
element) that defines its location within a descriptor set layout. In GLSL,
the set number and binding number are assigned via layout qualifiers, and
the array element is implicitly assigned consecutively starting with index
equal to zero for the first element of an array (and array element is zero
for non-array variables):

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
// Assign set number = M, binding number = N, array element = 0
layout (set=m, binding=n) uniform sampler2D variableName;

// Assign set number = M, binding number = N for all array elements, and
// array element = i for the i'th member of the array.
layout (set=m, binding=n) uniform sampler2D variableNameArray[L];
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
// Assign set number = M, binding number = N, array element = 0
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %10 "variableName"
               OpDecorate %10 DescriptorSet m
               OpDecorate %10 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 2D 0 0 0 1 Unknown
          %8 = OpTypeSampledImage %7
          %9 = OpTypePointer UniformConstant %8
         %10 = OpVariable %9 UniformConstant
               ...

// Assign set number = M, binding number = N for all array elements, and
// array element = i for the i'th member of the array.
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %13 "variableNameArray"
               OpDecorate %13 DescriptorSet m
               OpDecorate %13 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 2D 0 0 0 1 Unknown
          %8 = OpTypeSampledImage %7
          %9 = OpTypeInt 32 0
         %10 = OpConstant %9 L
         %11 = OpTypeArray %8 %10
         %12 = OpTypePointer UniformConstant %11
         %13 = OpVariable %12 UniformConstant
               ...
---------------------------------------------------


[[descriptorsets-types]]
== Descriptor Types

The following sections outline the various descriptor types supported by
{apiname}. Each section defines a descriptor type, and each descriptor type
has a manifestation in the shading language and SPIR-V as well as in
descriptor sets. There is mostly a one-to-one correspondence between
descriptor types and classes of opaque types in the shading language, where
the opaque types in the shading language must: refer to a descriptor in the
pipeline layout of the corresponding descriptor type. But there is an
exception to this rule as described in
<<descriptorsets-combinedimagesampler,Combined Image Sampler>>.


[[descriptorsets-storageimage]]
=== Storage Image

A _storage image_ (ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE) is a descriptor
type that is used for load, store, and atomic operations on image memory
from within shaders bound to pipelines.

Loads from storage images do not use samplers and are unfiltered and do not
support coordinate wrapping or clamping. Loads are supported in all shader
stages for image formats which report support for the
<<features-formats-properties-storage,ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT>>
feature bit via flink:vkGetPhysicalDeviceFormatProperties.

Stores to storage images are supported in compute shaders for image
formats which report support for the
ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT feature.

Storage images also support atomic operations in compute shaders for
image formats which report support for the
<<features-formats-properties-storageatomic,ename:VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT>>
feature.

Load and store operations on storage images can: only be done on images in
ename:VK_IMAGE_LAYOUT_GENERAL layout.

When the <<features-features-fragmentStoresAndAtomics,
pname:fragmentStoresAndAtomics>>
feature is enabled, stores and atomic operations are also supported
for storage images in fragment shaders with the same set of image
formats as supported in compute shaders. When the
<<features-features-vertexPipelineStoresAndAtomics,
pname:vertexPipelineStoresAndAtomics>> feature is enabled, stores and
atomic operations are also supported in vertex, tessellation, and
geometry shaders with the same set of image formats as supported
in compute shaders.

Storage image declarations must: specify the image format in the
shader if the variable is used for atomic operations.

If the <<features-features-shaderStorageImageReadWithoutFormat,
pname:shaderStorageImageReadWithoutFormat>> feature is not enabled,
storage image declarations must: specify the image format in the
shader if the variable is used for load operations.

If the <<features-features-shaderStorageImageWriteWithoutFormat,
pname:shaderStorageImageWriteWithoutFormat>> feature is not enabled,
storage image declarations must: specify the image format in the
shader if the variable is used for store operations.

Storage images are declared in GLSL shader source using uniform ``image''
variables of the appropriate dimensionality as well as a format layout
qualifier (if necessary):

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (set=m, binding=n, r32f) uniform image2D myStorageImage;
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %9 "myStorageImage"
               OpDecorate %9 DescriptorSet m
               OpDecorate %9 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 2D 0 0 0 2 R32f
          %8 = OpTypePointer UniformConstant %7
          %9 = OpVariable %8 UniformConstant
               ...
---------------------------------------------------


[[descriptorsets-sampler]]
=== Sampler
A _sampler_ (ename:VK_DESCRIPTOR_TYPE_SAMPLER) represents a set of
parameters which control address calculations, filtering behavior, and other
properties, that can: be used to perform filtered loads from _sampled
images_ (see <<descriptorsets-sampledimage, Sampled Image>>).

Samplers are declared in GLSL shader source using uniform ``sampler''
variables, where the sampler type has no associated texture dimensionality:

.GLSL Example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (set=m, binding=n) uniform sampler mySampler;
---------------------------------------------------

.SPIR-V Example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %8 "mySampler"
               OpDecorate %8 DescriptorSet m
               OpDecorate %8 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeSampler
          %7 = OpTypePointer UniformConstant %6
          %8 = OpVariable %7 UniformConstant
               ...
---------------------------------------------------


[[descriptorsets-sampledimage]]
=== Sampled Image

A _sampled image_ (ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE)
can: be used (usually in conjunction with a sampler) to retrieve sampled
image data. Shaders use a sampled image handle and a sampler handle to
sample data, where the image handle generally defines the shape and format
of the memory and the sampler generally defines how coordinate addressing is
performed. The same sampler can: be used to sample from multiple images, and
it is possible to sample from the same sampled image with multiple samplers,
each containing a different set of sampling parameters.

Sampled images are declared in GLSL shader source using uniform ``texture''
variables of the appropriate dimensionality:

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (set=m, binding=n) uniform texture2D mySampledImage;
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %9 "mySampledImage"
               OpDecorate %9 DescriptorSet m
               OpDecorate %9 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 2D 0 0 0 1 Unknown
          %8 = OpTypePointer UniformConstant %7
          %9 = OpVariable %8 UniformConstant
               ...
---------------------------------------------------


[[descriptorsets-combinedimagesampler]]
=== Combined Image Sampler

A _combined image sampler_ (ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER)
represents a sampled image along with a set of sampling parameters. It is
logically considered a sampled image and a sampler bound together.

[NOTE]
.Note
====
On some implementations, it may: be more efficient to sample from an image
using a combination of sampler and sampled image that are stored together in
the descriptor set in a combined descriptor.
====

Combined image samplers are declared in GLSL shader source using uniform
``sampler'' variables of the appropriate dimensionality:

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (set=m, binding=n) uniform sampler2D myCombinedImageSampler;
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %10 "myCombinedImageSampler"
               OpDecorate %10 DescriptorSet m
               OpDecorate %10 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 2D 0 0 0 1 Unknown
          %8 = OpTypeSampledImage %7
          %9 = OpTypePointer UniformConstant %8
         %10 = OpVariable %9 UniformConstant
               ...
---------------------------------------------------

ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER descriptor set entries can:
also be accessed via separate sampler and sampled image shader variables.
Such variables refer exclusively to the corresponding half of the
descriptor, and can: be combined in the shader with samplers or sampled
images that can: come from the same descriptor or from other combined or
separate descriptor types. There are no additional restrictions on how a
separate sampler or sampled image variable is used due to it originating
from a combined descriptor.


[[descriptorsets-uniformtexelbuffer]]
=== Uniform Texel Buffer

A _uniform texel buffer_ (ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER)
represents a tightly packed array of homogeneous
formatted data that is stored in a buffer and is made accessible to shaders.
Uniform texel buffers are read-only.

Uniform texel buffers are declared in GLSL shader source using uniform
``samplerBuffer'' variables:

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (set=m, binding=n) uniform samplerBuffer myUniformTexelBuffer;
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %10 "myUniformTexelBuffer"
               OpDecorate %10 DescriptorSet m
               OpDecorate %10 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 Buffer 0 0 0 1 Unknown
          %8 = OpTypeSampledImage %7
          %9 = OpTypePointer UniformConstant %8
         %10 = OpVariable %9 UniformConstant
               ...
---------------------------------------------------


[[descriptorsets-storagetexelbuffer]]
=== Storage Texel Buffer

A _storage texel buffer_ (ename:VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER)
represents a tightly packed array of homogeneous formatted data that is
stored in a buffer and is made accessible to shaders. Storage texel buffers
differ from uniform texel buffers in that they support stores and atomic
operations in shaders, may: support a different maximum length, and may:
have different performance characteristics.

Storage texel buffers are declared in GLSL shader source using uniform
``imageBuffer'' variables:

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (set=m, binding=n, r32f) uniform imageBuffer myStorageTexelBuffer;
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %9 "myStorageTexelBuffer"
               OpDecorate %9 DescriptorSet m
               OpDecorate %9 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 Buffer 0 0 0 2 R32f
          %8 = OpTypePointer UniformConstant %7
          %9 = OpVariable %8 UniformConstant
               ...
---------------------------------------------------


[[descriptorsets-uniformbuffer]]
=== Uniform Buffer

A _uniform buffer_ (ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER) is a region of
structured storage that is made accessible for read-only access to shaders.
It is typically used to store medium sized arrays of constants such as
shader parameters, matrices and other related data.

Uniform buffers are declared in GLSL shader source using the uniform storage
qualifier and block syntax:

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (set=m, binding=n) uniform myUniformBuffer
{
    vec4 myElement[32];
};
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %11 "myUniformBuffer"
               OpMemberName %11 0 "myElement"
               OpName %13 ""
               OpDecorate %10 ArrayStride 16
               OpMemberDecorate %11 0 Offset 0
               OpDecorate %11 Block
               OpDecorate %13 DescriptorSet m
               OpDecorate %13 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeVector %6 4
          %8 = OpTypeInt 32 0
          %9 = OpConstant %8 32
         %10 = OpTypeArray %7 %9
         %11 = OpTypeStruct %10
         %12 = OpTypePointer Uniform %11
         %13 = OpVariable %12 Uniform
               ...
---------------------------------------------------


[[descriptorsets-storagebuffer]]
=== Storage Buffer

A _storage buffer_ (ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER) is a region of
structured storage that supports both read and write
access for shaders. In addition to general read and write operations, some
members of storage buffers can: be used as the target of atomic operations.
In general, atomic operations are only supported on members that have
unsigned integer formats.

Storage buffers are declared in GLSL shader source using buffer storage
qualifier and block syntax:

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (set=m, binding=n) buffer myStorageBuffer
{
    vec4 myElement[];
};
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %9 "myStorageBuffer"
               OpMemberName %9 0 "myElement"
               OpName %11 ""
               OpDecorate %8 ArrayStride 16
               OpMemberDecorate %9 0 Offset 0
               OpDecorate %9 BufferBlock
               OpDecorate %11 DescriptorSet m
               OpDecorate %11 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeVector %6 4
          %8 = OpTypeRuntimeArray %7
          %9 = OpTypeStruct %8
         %10 = OpTypePointer Uniform %9
         %11 = OpVariable %10 Uniform
               ...
---------------------------------------------------


[[descriptorsets-uniformbufferdynamic]]
=== Dynamic Uniform Buffer

A _dynamic uniform buffer_ (ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC)
differs from a uniform buffer only in how its address and length are
specified. Uniform buffers bind a buffer address and length that is
specified in the descriptor set update by a buffer handle, offset and range
(see <<descriptorsets-updates, Descriptor Set Updates>>). With dynamic
uniform buffers the buffer handle, offset and range specified in the
descriptor set define the base address and length. The dynamic offset which
is relative to this base address is taken from the pname:pDynamicOffsets
parameter to flink:vkCmdBindDescriptorSets (see <<descriptorsets-binding,
Descriptor Set Binding>>). The address used for a dynamic uniform buffer is
the sum of the buffer base address and the relative offset. The length is
unmodified and remains the range as specified in the descriptor update. The
shader syntax is identical for uniform buffers and dynamic uniform buffers.


[[descriptorsets-storagebufferdynamic]]
=== Dynamic Storage Buffer

A _dynamic storage buffer_ (ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC)
differs from a storage buffer only in how its address and length are
specified. The difference is identical to the difference between uniform
buffers and dynamic uniform buffers (see
<<descriptorsets-uniformbufferdynamic, Dynamic Uniform Buffer>>). The shader
syntax is identical for storage buffers and dynamic storage buffers.


[[descriptorsets-inputattachment]]
=== Input Attachment

An _input attachment_ (ename:VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT) is an
image view that can: be used for pixel local load operations from within
fragment shaders bound to pipelines. Loads from input attachments are
unfiltered. All image formats that are supported for color attachments
(ename:VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT) or depth/stencil attachments
(ename:VK_FORMAT_FEATURE_DEPTH_STENCIL_ATTACHMENT_BIT) for a given image
tiling mode are also supported for input attachments.

In the shader, input attachments must: be decorated with their input
attachment index in addition to descriptor set and binding numbers.

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
layout (input_attachment_index=i, set=m, binding=n) uniform subpassInput myInputAttachment;
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %9 "myInputAttachment"
               OpDecorate %9 DescriptorSet m
               OpDecorate %9 Binding n
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 SubpassData 0 0 0 2 Unknown
          %8 = OpTypePointer UniformConstant %7
          %9 = OpVariable %8 UniformConstant
               ...
---------------------------------------------------


[[descriptorsets-sets]]
== Descriptor Sets

Descriptors are grouped together into descriptor set objects. A descriptor
set object is an opaque object that contains storage for a set of
descriptors, where the types and number of descriptors is defined by a
descriptor set layout. The layout object may: be used to define the
association of each descriptor binding with memory or other hardware
resources. The layout is used both for determining the resources that need
to be associated with the descriptor set, and determining the interface
between shader stages and shader resources.


[[descriptorsets-setlayout]]
=== Descriptor Set Layout

A descriptor set layout object is defined by an array of zero or more
descriptor bindings. Each individual descriptor binding is specified by a
descriptor type, a count (array size) of the number of descriptors in the
binding, a set of shader stages that can: access the binding, and (if using
immutable samplers) an array of sampler descriptors.

Descriptor set layouts are represented by sname:VkDescriptorSetLayout
objects which are created by calling:

include::../protos/vkCreateDescriptorSetLayout.txt[]

  * pname:device is the logical device that creates the descriptor set
    layout.
  * pname:pCreateInfo is a pointer to an instance of the
    slink:VkDescriptorSetLayoutCreateInfo structure specifying the state of
    the descriptor set layout object.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.
  * pname:pSetLayout points to a sname:VkDescriptorSetLayout handle in which
    the resulting descriptor set layout object is returned.

include::../validity/protos/vkCreateDescriptorSetLayout.txt[]

Information about the descriptor set layout is passed in an instance of the
sname:VkDescriptorSetLayoutCreateInfo structure:

include::../structs/VkDescriptorSetLayoutCreateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:flags is reserved for future use.
  * pname:bindingCount is the number of elements in pname:pBindings.
  * pname:pBindings is a pointer to an array of
    slink:VkDescriptorSetLayoutBinding structures.

include::../validity/structs/VkDescriptorSetLayoutCreateInfo.txt[]

The definition of the sname:VkDescriptorSetLayoutBinding structure is:

include::../structs/VkDescriptorSetLayoutBinding.txt[]

  * pname:binding is the binding number of this entry and corresponds
    to a resource of the same binding number in the shader stages.
  * pname:descriptorType is an elink:VkDescriptorType specifying which type
    of resource descriptors are used for this binding.
  * pname:descriptorCount is the number of descriptors contained in the
    binding, accessed in a shader as an array. If pname:descriptorCount is
    zero this binding entry is reserved and the resource mustnot: be
    accessed from any stage via this binding within any pipeline using the
    set layout.
  * pname:stageFlags member is a bitfield of elink:VkShaderStageFlagBits
    specifying which pipeline shader stages can: access a resource for this
    binding. ename:VK_SHADER_STAGE_ALL is a shorthand specifying that all
    defined shader stages, including any additional stages defined by
    extensions, can: access the resource.
+
If a shader stage is not included in pname:stageFlags, then a resource
mustnot: be accessed from that stage via this binding within any pipeline
using the set layout. There are no limitations on what combinations of
stages can: be used by a descriptor binding, and in particular a binding
can: be used by both graphics stages and the compute stage.

  * pname:pImmutableSamplers affects initialization of samplers. If
    pname:descriptorType specifies a ename:VK_DESCRIPTOR_TYPE_SAMPLER or
    ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER type descriptor, then
    pname:pImmutableSamplers can: be used to initialize a set of _immutable
    samplers_. Immutable samplers are permanently bound into the set layout;
    later binding a sampler into an immutable sampler slot in a descriptor
    set is not allowed. If pname:pImmutableSamplers is not `NULL`, then it
    is considered to be a pointer to an array of sampler handles that will
    be consumed by the set layout and used for the corresponding binding. If
    pname:pImmutableSamplers is `NULL`, then the sampler slots are dynamic
    and sampler handles must: be bound into descriptor sets using this
    layout. If pname:descriptorType is not one of these descriptor types,
    then pname:pImmutableSamplers is ignored.

The above layout definition allows the descriptor bindings to be specified
sparsely such that not all binding numbers between 0 and the maximum
binding number need to be specified in the pname:pBindings array. However,
all binding numbers between 0 and the maximum binding number may: consume
memory in the descriptor set layout even if not all descriptor bindings are
used, though it shouldnot:
consume additional memory from the descriptor pool.

[NOTE]
.Note
====
The maximum binding number specified should: be as compact as possible to
avoid wasted memory.
====

include::../validity/structs/VkDescriptorSetLayoutBinding.txt[]

The following examples show a shader snippet using two descriptor sets, and
application code that creates corresponding descriptor set layouts.

.GLSL example
[source,{basebackend@docbook:c:glsl}]
---------------------------------------------------
//
// binding to a single sampled image descriptor in set 0
//
layout (set=0, binding=0) uniform texture2D mySampledImage;

//
// binding to an array of sampled image descriptors in set 0
//
layout (set=0, binding=1) uniform texture2D myArrayOfSampledImages[12];

//
// binding to a single uniform buffer descriptor in set 1
//
layout (set=1, binding=0) uniform myUniformBuffer
{
    vec4 myElement[32];
};
---------------------------------------------------

.SPIR-V example
---------------------------------------------------
               ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %9 "mySampledImage"
               OpName %14 "myArrayOfSampledImages"
               OpName %18 "myUniformBuffer"
               OpMemberName %18 0 "myElement"
               OpName %20 ""
               OpDecorate %9 DescriptorSet 0
               OpDecorate %9 Binding 0
               OpDecorate %14 DescriptorSet 0
               OpDecorate %14 Binding 1
               OpDecorate %17 ArrayStride 16
               OpMemberDecorate %18 0 Offset 0
               OpDecorate %18 Block
               OpDecorate %20 DescriptorSet 1
               OpDecorate %20 Binding 0
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeImage %6 2D 0 0 0 1 Unknown
          %8 = OpTypePointer UniformConstant %7
          %9 = OpVariable %8 UniformConstant
         %10 = OpTypeInt 32 0
         %11 = OpConstant %10 12
         %12 = OpTypeArray %7 %11
         %13 = OpTypePointer UniformConstant %12
         %14 = OpVariable %13 UniformConstant
         %15 = OpTypeVector %6 4
         %16 = OpConstant %10 32
         %17 = OpTypeArray %15 %16
         %18 = OpTypeStruct %17
         %19 = OpTypePointer Uniform %18
         %20 = OpVariable %19 Uniform
               ...
---------------------------------------------------

.API example
[source,{basebackend@docbook:c++:cpp}]
-------------------------------------------------------------------------------
VkResult myResult;

const VkDescriptorSetLayoutBinding myDescriptorSetLayoutBinding[] =
{
    // binding to a single image descriptor
    {
        0,                                      // binding
        VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE,       // descriptorType
        1,                                      // descriptorCount
        VK_SHADER_STAGE_FRAGMENT_BIT,           // stageFlags
        NULL                                    // pImmutableSamplers
    },

    // binding to an array of image descriptors
    {
        1,                                      // binding
        VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE,       // descriptorType
        12,                                     // descriptorCount
        VK_SHADER_STAGE_FRAGMENT_BIT,           // stageFlags
        NULL                                    // pImmutableSamplers
    },

    // binding to a single uniform buffer descriptor
    {
        0,                                      // binding
        VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER,      // descriptorType
        1,                                      // descriptorCount
        VK_SHADER_STAGE_FRAGMENT_BIT,           // stageFlags
        NULL                                    // pImmutableSamplers
    }
};

const VkDescriptorSetLayoutCreateInfo myDescriptorSetLayoutCreateInfo[] =
{
    // Create info for first descriptor set with two descriptor bindings
    {
        VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO,    // sType
        NULL,                                                   // pNext
        0,                                                      // flags
        2,                                                      // bindingCount
        &myDescriptorSetLayoutBinding[0]                        // pBindings
    },

    // Create info for second descriptor set with one descriptor binding
    {
        VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO,    // sType
        NULL,                                                   // pNext
        0,                                                      // flags
        1,                                                      // bindingCount
        &myDescriptorSetLayoutBinding[2]                        // pBindings
    }
};

VkDescriptorSetLayout myDescriptorSetLayout[2];

//
// Create first descriptor set layout
//
myResult = vkCreateDescriptorSetLayout(
    myDevice,
    &myDescriptorSetLayoutCreateInfo[0],
    &myDescriptorSetLayout[0]);

//
// Create second descriptor set layout
//
myResult = vkCreateDescriptorSetLayout(
    myDevice,
    &myDescriptorSetLayoutCreateInfo[1],
    &myDescriptorSetLayout[1]);
-------------------------------------------------------------------------------

To destroy a descriptor set layout, call:

include::../protos/vkDestroyDescriptorSetLayout.txt[]

  * pname:device is the logical device that destroys the descriptor set
    layout.
  * pname:descriptorSetLayout is the descriptor set layout to destroy.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.

include::../validity/protos/vkDestroyDescriptorSetLayout.txt[]


[[descriptorsets-pipelinelayout]]
=== Pipeline Layouts

Access to descriptor sets from a pipeline is accomplished through a
_pipeline layout_. Zero or more descriptor set layouts and zero or more push
constant ranges are combined to form a
pipeline layout object which describes the complete set of resources that
can: be accessed by a pipeline. The pipeline layout represents a sequence of
descriptor sets with each having a specific layout. This sequence of layouts
is used to determine the interface between shader stages and shader
resources. Each pipeline is created using a pipeline layout.

A pipeline layout is created by calling:

include::../protos/vkCreatePipelineLayout.txt[]

  * pname:device is the logical device that creates the pipeline layout.
  * pname:pCreateInfo is a pointer to an instance of the
    slink:VkPipelineLayoutCreateInfo structure specifying the state of the
    pipeline layout object.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.
  * pname:pPipelineLayout points to a sname:VkPipelineLayout handle in which
    the resulting pipeline layout object is returned.

include::../validity/protos/vkCreatePipelineLayout.txt[]

The definition of the slink:VkPipelineLayoutCreateInfo structure is:

include::../structs/VkPipelineLayoutCreateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:flags is reserved for future use.
  * pname:setLayoutCount is the number of descriptor sets included in
    the pipeline layout.
  * pname:pSetLayouts is a pointer to an array of
    sname:VkDescriptorSetLayout objects.
  * pname:pushConstantRangeCount is the number of push constant ranges
    included in the pipeline layout.
  * pname:pPushConstantRanges is a pointer to an array of
    sname:VkPushConstantRange structures defining a set of push constant
    ranges for use in a single pipeline layout. In addition to descriptor
    set layouts, a pipeline layout also describes how many push constants
    can: be accessed by each stage of the pipeline.
+
[NOTE]
.Note
====
Push constants represent a high speed path to modify constant data in
pipelines that is expected to outperform memory-backed resource updates.
====

include::../validity/structs/VkPipelineLayoutCreateInfo.txt[]

The definition of sname:VkPushConstantRange is:

include::../structs/VkPushConstantRange.txt[]

  * pname:stageFlags is a set of stage flags describing the shader
    stages that will access a range of push constants. If a particular stage
    is not included in the range, then accessing members of that range of
    push constants from the corresponding shader stage will result in
    undefined data being read.
  * pname:offset and pname:size are the start offset and size,
    respectively, consumed by the range. Both pname:offset and pname:size
    are in units of bytes and must: be a multiple of 4. The layout of
    the push constant variables is specified in the shader.

include::../validity/structs/VkPushConstantRange.txt[]

Once created, pipeline layouts are used as part of pipeline creation (see
<<pipelines, Pipelines>>), as part of binding descriptor sets (see
<<descriptorsets-binding, Descriptor Set Binding>>), and as part of setting
push constants (see <<descriptorsets-push-constants, Push Constant
Updates>>). Pipeline creation accepts a pipeline layout as input, and the
layout may: be used to map (set, binding, arrayElement) tuples to hardware
resources or memory locations within a descriptor set. The assignment of
hardware resources depends only on the bindings defined in the descriptor
sets that comprise the pipeline layout, and not on any shader source.

[[descriptorsets-pipelinelayout-consistency]]
All resource variables <<shaders-staticuse,statically used>> in all shaders
in a pipeline must: be declared with a (set,binding,arrayElement) that
exists in the corresponding descriptor set layout and is of an appropriate
descriptor type and includes the set of shader stages it is used by in
pname:stageFlags. The pipeline layout can: include entries that are not used
by a particular pipeline, or that are dead-code eliminated from any of the
shaders. The pipeline layout allows the application to provide a consistent
set of bindings across multiple pipeline compiles, which enables those
pipelines to be compiled in a way that the implementation may: cheaply
switch pipelines without reprogramming the bindings.

Similarly, the push constant block declared in each shader (if present)
must: only place variables at offsets that are each included in a push
constant range with pname:stageFlags including the bit corresponding to the
shader stage that uses it. The pipeline layout can: include ranges or
portions of ranges that are not used by a particular pipeline, or for which
the variables have been dead-code eliminated from any of the shaders.

There is a limit on the total number of resources of each type that can: be
included in bindings in all descriptor set layouts in a pipeline layout as
shown in <<descriptorsets-pipelinelayout-limits,Pipeline Layout Resource
Limits>>. The ``Total Resources Available'' column gives the limit on the
number of each type of resource that can: be included in bindings in all
descriptor sets in the pipeline layout. Some resource types count against
multiple limits. Additionally, there are limits on the total number of each
type of resource that can: be used in any pipeline stage as described in
<<interfaces-resources-limits,Shader Resource Limits>>.

[[descriptorsets-pipelinelayout-limits]]
.Pipeline Layout Resource Limits
[width="80%",cols="<37,<22",options="header"]
|=============================
| Total Resources Available | Resource Types
.2+<.^| maxDescriptorSetSamplers
            | sampler           | combined image sampler
.3+<.^| maxDescriptorSetSampledImages
            | sampled image     | combined image sampler | uniform texel buffer
.2+<.^| maxDescriptorSetStorageImages
            | storage image     | storage texel buffer
.2+<.^| maxDescriptorSetUniformBuffers
            | uniform buffer    | uniform buffer dynamic
| maxDescriptorSetUniformBuffersDynamic
            | uniform buffer dynamic
.2+<.^| maxDescriptorSetStorageBuffers
            | storage buffer    | storage buffer dynamic
| maxDescriptorSetStorageBuffersDynamic
            | storage buffer dynamic
| maxDescriptorSetInputAttachments
            | input attachment
|=============================


To destroy a pipeline layout, call:

include::../protos/vkDestroyPipelineLayout.txt[]

  * pname:device is the logical device that destroys the pipeline layout.
  * pname:pipelineLayout is the pipeline layout to destroy.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.

include::../validity/protos/vkDestroyPipelineLayout.txt[]


[[descriptorsets-compatibility]]
==== Pipeline Layout Compatibility

Two pipeline layouts are defined to be ``compatible for
<<descriptorsets-push-constants, push constants>>'' if they were created
with identical push constant ranges. Two pipeline layouts are defined to be
``compatible for set N'' if they were created with matching (the same, or
identically defined) descriptor set layouts for sets zero through N, and if
they were created with identical push constant ranges.

When binding a descriptor set (see <<descriptorsets-binding, Descriptor Set
Binding>>) to set number N, if the previously bound descriptor sets for sets
zero through N-1 were all bound using compatible pipeline layouts, then
performing this binding does not disturb any of the lower numbered sets. If,
additionally, the previous bound descriptor set for set N was bound using a
pipeline layout compatible for set N, then the bindings in sets numbered
greater than N are also not disturbed.

Similarly, when binding a pipeline, the pipeline can: correctly access any
previously bound descriptor sets which were bound with compatible pipeline
layouts, as long as all lower numbered sets were also bound with
compatible layouts.

Layout compatibility means that descriptor sets can: be bound to a command
buffer for use by any pipeline created with a compatible pipeline layout,
and without having bound a particular pipeline first. It also means that
descriptor sets can: remain valid across a pipeline change, and the same
resources will be accessible to the newly bound pipeline.

ifdef::implementation-guide[]
.Implementor's Note
****
A consequence of layout compatibility is that when the implementation
compiles a pipeline layout and assigns hardware units to resources, the
mechanism to assign hardware units for set N should: only be a function of
sets [0..N].
****
endif::implementation-guide[]

[NOTE]
.Note
====
Place the least frequently changing descriptor sets near the start of
the pipeline layout, and place the descriptor sets representing the most
frequently changing resources near the end. When pipelines are switched,
only the descriptor set bindings that have been invalidated will need to be
updated and the remainder of the descriptor set bindings will remain in
place.
====

The maximum number of descriptor sets that can: be bound to a pipeline
layout is queried from physical device properties (see
pname:maxBoundDescriptorSets in <<features-limits, Limits>>).

.API example
[source,{basebackend@docbook:c++:cpp}]
---------------------------------------------------
const VkDescriptorSetLayout layouts = { layout1, layout2 };

const VkPushConstantRange ranges[] =
{
    {
        VK_PIPELINE_STAGE_VERTEX_SHADER_BIT,    // stageFlags
        0,                                      // offset
        4                                       // size
    },

    {
        VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT,  // stageFlags
        4,                                      // offset
        4                                       // size
    },
};

const VkPipelineLayoutCreateInfo createInfo =
{
    VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO,  // sType
    NULL,                                           // pNext
    2,                                              // setLayoutCount
    layouts,                                        // pSetLayouts
    2,                                              // pushConstantRangeCount
    ranges                                          // pPushConstantRanges
};

VkPipelineLayout myPipelineLayout;
myResult = vkCreatePipelineLayout(
    myDevice,
    &createInfo,
    &myPipelineLayout);
---------------------------------------------------


[[descriptorsets-allocation]]
=== Allocation of Descriptor Sets

Descriptor sets are allocated from _descriptor pool_ objects. A descriptor
pool maintains a pool of descriptors, from which sets are allocated.
Descriptor pools are externally synchronized, meaning that the application
mustnot: allocate and/or free descriptor sets from the same pool in multiple
threads simultaneously.

To create a descriptor pool object, call:

include::../protos/vkCreateDescriptorPool.txt[]

  * pname:device is the logical device that creates the descriptor pool.
  * pname:pCreateInfo is a pointer to an instance of the
    slink:VkDescriptorPoolCreateInfo structure specifying the state of the
    descriptor pool object.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.
  * pname:pDescriptorPool points to a sname:VkDescriptorPool handle in which
    the resulting descriptor pool object is returned.

pname:pAllocator controls host memory allocation as described in the
<<memory-allocation, Memory Allocation>> chapter.

The created descriptor pool is returned in pname:pDescriptorPool.

include::../validity/protos/vkCreateDescriptorPool.txt[]

Additional information about the pool is passed in an instance of the
sname:VkDescriptorPoolCreateInfo structure:

include::../structs/VkDescriptorPoolCreateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:flags specifies certain supported operations on the pool, with
    possible values defined below.
  * pname:maxSets is the maximum number of descriptor sets that can:
    be allocated from the pool.
  * pname:poolSizeCount is the number of elements in pname:pPoolSizes.
  * pname:pPoolSizes is a pointer to an array of sname:VkDescriptorPoolSize
    structures, each containing a descriptor type and number of descriptors
    of that type to be allocated in the pool.

include::../validity/structs/VkDescriptorPoolCreateInfo.txt[]

If multiple sname:VkDescriptorPoolSize structures appear in the
pname:pPoolSizes array then the pool will be created with enough storage
for the total number of descriptors of each type.

Fragmentation of a descriptor pool is possible and may: lead to descriptor
set allocation failures. A failure due to fragmentation is defined as
failing a descriptor set allocation despite the sum of all outstanding
descriptor set allocations from the pool plus the requested allocation
requiring no more than the total number of descriptors requested at pool
creation. Implementations provide certain guarantees of when fragmentation
mustnot: cause allocation failure, as described below.

If a descriptor pool has not had any descriptor sets freed since it was
created or most recently reset then fragmentation mustnot: cause an
allocation failure (note that this is always the case for a pool created
without the ename:VK_DESCRIPTOR_POOL_CREATE_FREE_DESCRIPTOR_SET_BIT bit
set). Additionally, if all sets allocated from the pool since it was created
or most recently reset use the same number of descriptors (of each type) and
the requested allocation also uses that same number of descriptors (of each
type), then fragmentation mustnot: cause an allocation failure.

If an allocation failure occurs due to fragmentation, an application can:
create an additional descriptor pool to perform further descriptor set
allocations.

The pname:flags member of sname:VkDescriptorPoolCreateInfo can: include the
following values:

include::../enums/VkDescriptorPoolCreateFlagBits.txt[]

If pname:flags includes
ename:VK_DESCRIPTOR_POOL_CREATE_FREE_DESCRIPTOR_SET_BIT, then descriptor
sets can: return their individual allocations to the pool, i.e. all of
fname:vkAllocateDescriptorSets, fname:vkFreeDescriptorSets, and
fname:vkResetDescriptorPool are allowed. Otherwise, descriptor sets
allocated from the pool mustnot: be individually freed back to the pool,
i.e. only fname:vkAllocateDescriptorSets and fname:vkResetDescriptorPool are
allowed.

The definition of the sname:VkDescriptorPoolSize structure is:

include::../structs/VkDescriptorPoolSize.txt[]

  * pname:type is the type of descriptor.
  * pname:descriptorCount is the number of descriptors of that type
    to allocate.

include::../validity/structs/VkDescriptorPoolSize.txt[]

To destroy a descriptor pool, call:

include::../protos/vkDestroyDescriptorPool.txt[]

  * pname:device is the logical device that destroys the descriptor pool.
  * pname:descriptorPool is the descriptor pool to destroy.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.

include::../validity/protos/vkDestroyDescriptorPool.txt[]

When a pool is destroyed, all descriptor sets allocated from the pool are
implicitly freed and become invalid. Descriptor sets allocated from a given
pool do not need to be freed before destroying that descriptor pool.

Descriptor sets are allocated from a descriptor pool by calling:

include::../protos/vkAllocateDescriptorSets.txt[]

  * pname:device is the logical device that owns the descriptor pool.
  * pname:pAllocateInfo is a pointer to an instance of the
    slink:VkDescriptorSetAllocateInfo structure describing parameters of the
    allocation.
  * pname:pDescriptorSets is a pointer to an array of sname:VkDescriptorSet
    handles in which the resulting descriptor set objects are returned. The
    array must be at least the length specified by the
    pname:descriptorSetCount member of pname:pAllocateInfo.

include::../validity/protos/vkAllocateDescriptorSets.txt[]

The sname:VkDescriptorSetAllocateInfo structure is defined as:

include::../structs/VkDescriptorSetAllocateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:descriptorPool is the pool which the sets will be allocated from.
  * pname:descriptorSetCount determines the number descriptor sets to be
    allocated from the pool.
  * pname:pSetLayouts is an array of descriptor set layouts, with each
    member specifying how the corresponding descriptor set is allocated.

The allocated descriptor sets are returned in pname:pDescriptorSets.

include::../validity/structs/VkDescriptorSetAllocateInfo.txt[]

When a descriptor set is allocated, the initial state is largely
uninitialized and all descriptors are undefined. However,
the descriptor set can: be bound
in a command buffer without causing errors or exceptions. Entries must: be
populated before they are accessed by a pipeline, but leaving uninitialized
entries that are not accessed by a pipeline will produce well-defined
results. This means applications need not populate unused entries with dummy
descriptors.

Allocated descriptor sets are freed by calling:

include::../protos/vkFreeDescriptorSets.txt[]

  * pname:device is the logical device that owns the descriptor pool.
  * pname:descriptorPool is the descriptor pool from which the descriptor
    sets were allocated.
  * pname:descriptorSetCount is the number of elements in the
    pname:pDescriptorSets array.
  * pname:pDescriptorSets is an array of handles to slink:VkDescriptorSet
    objects. All elements of pname:pDescriptorSets must: have been allocated
    from pname:descriptorPool.

In order to free individual descriptor sets, pname:descriptorPool must: have
been created with the
ename:VK_DESCRIPTOR_POOL_CREATE_FREE_DESCRIPTOR_SET_BIT flag.

ifdef::editing-notes[]
[NOTE]
.editing-note
====
(Jon) Several comments above seem like they belong in validity XML.
====
endif::editing-notes[]

include::../validity/protos/vkFreeDescriptorSets.txt[]

After a successful call to fname:vkFreeDescriptorSets, all descriptor sets
in pname:pDescriptorSets are invalid.

Rather than freeing individual descriptor sets, all descriptor sets
allocated from a given pool can: be returned to the pool by calling:

include::../protos/vkResetDescriptorPool.txt[]

  * pname:device is the logical device that owns the descriptor pool.
  * pname:descriptorPool is the descriptor pool to be reset.
  * pname:flags is currently unused and must be zero.

include::../validity/protos/vkResetDescriptorPool.txt[]

Resetting a descriptor pool recycles all of the resources from all of the
descriptor sets allocated from the descriptor pool back to the descriptor
pool, and the descriptor sets are implicitly freed.


[[descriptorsets-updates]]
=== Descriptor Set Updates

Once allocated, descriptor sets can: be updated with a combination of write
and copy operations. To update descriptor sets, call:

include::../protos/vkUpdateDescriptorSets.txt[]

  * pname:device is the logical device that updates the descriptor sets.
  * pname:descriptorWriteCount is the number of elements in the
    pname:pDescriptorWrites array.
  * pname:pDescriptorWrites is a pointer to an array of
    slink:VkWriteDescriptorSet structures describing the descriptor sets to
    write to.
  * pname:descriptorCopyCount is the number of elements in the
    pname:pDescriptorCopies array.
  * pname:pDescriptorCopies is a pointer to an array of
    slink:VkCopyDescriptorSet structures describing the descriptor sets to
    copy between.

include::../validity/protos/vkUpdateDescriptorSets.txt[]

Each element in the pname:pDescriptorWrites array describes an operation
updating the descriptor set using descriptors for resources specified in the
structure.

The definition of sname:VkWriteDescriptorSet is:

include::../structs/VkWriteDescriptorSet.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:dstSet is the destination descriptor set to update.
  * pname:dstBinding is the descriptor binding within that set.
  * pname:dstArrayElement is the starting element in that array.
  * pname:descriptorCount is the number of descriptors to update (the
    number of elements in pname:pImageInfo, pname:pBufferInfo, or
    pname:pTexelBufferView).
  * pname:descriptorType is the type of each descriptor in pname:pImageInfo,
    pname:pBufferInfo, or pname:pTexelBufferView, and must: be the same type
    as what was specified in sname:VkDescriptorSetLayoutBinding for
    pname:dstSet at pname:dstBinding. The type of the descriptor also
    controls which array the descriptors are taken from.
    pname:descriptorType can: take on values including:

include::../enums/VkDescriptorType.txt[]

  * pname:pImageInfo points to an array of sname:VkDescriptorImageInfo
    structures or is ignored, as described below.
  * pname:pBufferInfo points to an array of sname:VkDescriptorBufferInfo
    structures or is ignored, as described below.
  * pname:pTexelBufferView points to an array of sname:VkBufferView
    handles or is ignored, as described below.

include::../validity/structs/VkWriteDescriptorSet.txt[]

Only one of pname:pImageInfo, pname:pBufferInfo, or pname:pTexelBufferView
members is used according to the descriptor type specified in the
pname:descriptorType member of the containing sname:VkWriteDescriptorSet
structure, as specified below.

If pname:descriptorType is ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER,
ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER,
ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC, or
ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC, the pname:pBufferInfo array
will be used to update the descriptors, and other arrays will be ignored.
Each entry is of type sname:VkDescriptorBufferInfo and is defined as:

include::../structs/VkDescriptorBufferInfo.txt[]

  * pname:buffer is the buffer resource.
  * pname:offset is the offset in bytes from the start of pname:buffer.
    Access to buffer memory via this descriptor uses addressing that is
    relative to this starting offset.
  * pname:range is the size in bytes that is used for this descriptor
    update, or ename:VK_WHOLE_SIZE to use the range from pname:offset to the
    end of the buffer.

include::../validity/structs/VkDescriptorBufferInfo.txt[]

For ename:VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC and
ename:VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC descriptor types,
pname:offset is the base offset from which the dynamic offset is applied and
pname:range is the static size used for all dynamic offsets.

If pname:descriptorType is ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER or
ename:VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER, the pname:pTexelBufferView
array will be used to update the descriptors, and other arrays will be
ignored.

If pname:descriptorType is ename:VK_DESCRIPTOR_TYPE_SAMPLER,
ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER,
ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE,
ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE, or
ename:VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT, the members in pname:pImageInfo
array will be used to update the descriptors, and other arrays will be
ignored. pname:imageInfo is of type sname:VkDescriptorImageInfo and is
defined as:

include::../structs/VkDescriptorImageInfo.txt[]

  * pname:sampler is a sampler handle, and is used in descriptor updates for
    types ename:VK_DESCRIPTOR_TYPE_SAMPLER and
    ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER if the binding being
    updated does not use immutable samplers.
  * pname:imageView is an image view handle, and is used in descriptor
    updates for types ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE,
    ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE,
    ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER, and
    ename:VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT.
  * pname:imageLayout is the layout that the image will be in at the time
    this descriptor is accessed. pname:imageLayout is used in descriptor
    updates for types ename:VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE,
    ename:VK_DESCRIPTOR_TYPE_STORAGE_IMAGE,
    ename:VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER, and
    ename:VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT.

include::../validity/structs/VkDescriptorImageInfo.txt[]

Members of sname:VkDescriptorImageInfo that are not used in an update (as
described above) are ignored.

[[descriptorsets-updates-consecutive, consecutive binding updates]]
If the pname:dstBinding has fewer than pname:descriptorCount array elements
remaining starting from pname:dstArrayElement, then the remainder will be
used to update the subsequent binding - pname:dstBinding+1 starting at array
element zero. This behavior applies recursively, with the update affecting
consecutive bindings as needed to update all pname:descriptorCount
descriptors. All consecutive bindings updated via a single
sname:VkWriteDescriptorSet structure must: have identical
pname:descriptorType and pname:stageFlags, and must: all either use
immutable samplers or must: all not use immutable samplers.

Each element in the pname:pDescriptorCopies array in a
sname:VkCopyDescriptorSet structure describing an operation copying
descriptors between sets. The definition of sname:VkCopyDescriptorSet is:

include::../structs/VkCopyDescriptorSet.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:srcSet, pname:srcBinding, and pname:srcArrayElement are the
    source set, binding, and array element, respectively.
  * pname:dstSet, pname:dstBinding, and pname:dstArrayElement are the
    destination set, binding, and array element, respectively.
  * pname:descriptorCount is the number of descriptors to copy from
    the source to destination. If pname:descriptorCount is greater than the
    number of remaining array elements in the source or destination binding,
    those affect consecutive bindings in a manner similar to
    slink:VkWriteDescriptorSet above.

include::../validity/structs/VkCopyDescriptorSet.txt[]


[[descriptorsets-binding]]
=== Descriptor Set Binding

Once descriptor sets have been allocated, one or more descriptor sets can:
be bound to the command buffer by calling:

include::../protos/vkCmdBindDescriptorSets.txt[]

  * pname:commandbuffer is the command buffer that the descriptor sets will
    be bound to.
  * pname:pipelineBindPoint is a elink:VkPipelineBindPoint indicating
    whether the descriptors will be used by graphics pipelines or compute
    pipelines. There is a separate set of bind points for each of graphics
    and compute, so binding one does not disturb the other.
  * pname:layout is a sname:VkPipelineLayout object used to program the
    bindings.
  * pname:firstSet is the set number of the first descriptor set to be
    bound.
  * pname:descriptorSetCount is the number of elements in the
    pname:pDescriptorSets array.
  * pname:pDescriptorSets is a pointer to an array of slink:VkDescriptorSet
    structures describing the descriptor sets to write to.
  * pname:dynamicOffsetCount is the number of dynamic offsets
    in the pname:pDynamicOffsets array.
  * pname:pDynamicOffsets is a pointer to an array of basetype:uint32_t
    values specifying dynamic offsets.

If any of the sets being bound include dynamic uniform or storage buffers,
then pname:pDynamicOffsets includes one element for each array element
in each dynamic descriptor type binding in each set. Values are taken from

fname:vkCmdBindDescriptorSets causes the sets numbered [pname:firstSet..
pname:firstSet+pname:descriptorSetCount-1] to use the bindings stored in
pname:pDescriptorSets[0..pname:descriptorSetCount-1] for subsequent
rendering commands (either compute or graphics, according to the
pname:pipelineBindPoint). Any bindings that were previously applied via
these sets are no longer valid.

Once bound, a descriptor set affects rendering of subsequent graphics or
compute commands in the command buffer until a different set is bound to the
same set number, or else until the set is disturbed as described in
<<descriptorsets-compatibility, Pipeline Layout Compatibility>>.

A compatible descriptor set must: be bound for all set numbers that any
shaders in a pipeline access, at the time that a draw or dispatch command is
recorded to execute using that pipeline. However, if none of the shaders in
a pipeline statically use any bindings with a particular set number, then no
descriptor set need be bound for that set number, even if the pipeline
layout includes a non-trivial descriptor set layout for that set number.

If any of the sets being bound include dynamic uniform or storage buffers,
then pname:pDynamicOffsets includes one element for each array element
in each dynamic descriptor type binding in each set. Values are taken from
pname:pDynamicOffsets in an order such that all entries for set N come
before set N+1; within a set, entries are ordered by the binding numbers in
the decriptor set layouts; and within a binding array, elements are in
order. pname:dynamicOffsetCount must: equal the total number of dynamic
descriptors in the sets being bound.

The effective offset used for dynamic uniform and storage buffer bindings is
the sum of the relative offset taken from pname:pDynamicOffsets, and the
base address of the buffer plus base offset in the descriptor set. The
length of the dynamic uniform and storage buffer bindings is the buffer
range as specified in the descriptor set.

Each of the pname:pDescriptorSets must: be compatible with the pipeline
layout specified by pname:layout. The layout used to program the bindings
must: also be compatible with the pipeline used in subsequent graphics or
compute commands, as defined in the <<descriptorsets-compatibility, Pipeline
Layout Compatibility>> section.

The descriptor set contents bound by a call to fname:vkCmdBindDescriptorSets
may: be consumed during host execution of the command, or during
shader execution of the resulting draws, or any time in between. Thus, the
contents mustnot: be altered (overwritten by an update command, or freed)
between when the command is recorded and when the command completes
executing on the queue. The contents of pname:pDynamicOffsets are consumed
immediately during execution of fname:vkCmdBindDescriptorSets. Once all
pending uses have completed, it is legal to update and reuse a descriptor
set.

include::../validity/protos/vkCmdBindDescriptorSets.txt[]


=== Push Constant Updates

[[descriptorsets-push-constants]]

As described above in section <<descriptorsets-pipelinelayout, Pipeline
Layouts>>, the pipeline layout defines shader push constants which are
updated via {apiname} commands rather than via writes to memory or copy
commands.

[NOTE]
.Note
====
Push constants represent a high speed path to modify constant data in
pipelines that is expected to outperform memory-backed resource updates.
====

The contents of the push constants are undefined at the start of a command
buffer. Push constants are updated by calling:

include::../protos/vkCmdPushConstants.txt[]

  * pname:commandbuffer is the command buffer in which the push constant
    update will be recorded.
  * pname:layout is the pipeline layout used to program the push constant
    updates.
  * pname:stageFlags is a bitmask of elink:VkShaderStageFlagBits specifying
    the shader stages that will use the push constants in the updated range.
  * pname:offset is the start offset of the push constant range to update,
    in units of bytes.
  * pname:size is the size of the push constant range to update, in units of
    bytes.
  * pname:pValues is an array of pname:size bytes containing the new push
    constant values.

include::../validity/protos/vkCmdPushConstants.txt[]