Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
// Copyright (c) 2015-2017 The Khronos Group Inc.
|
2016-02-16 09:53:44 +00:00
|
|
|
// Copyright notice at https://www.khronos.org/registry/speccopyright.html
|
|
|
|
|
|
|
|
|
|
[[samplers]]
|
|
|
|
|
= Samplers
|
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
// refBegin VkSampler Opaque handle to a sampler object
|
2016-07-11 01:13:41 +00:00
|
|
|
|
|
|
|
|
sname:VkSampler objects represent the state of an image sampler which is
|
2016-02-16 09:53:44 +00:00
|
|
|
used by the implementation to read image data and apply filtering and other
|
|
|
|
|
transformations for the shader.
|
|
|
|
|
|
2016-07-11 01:13:41 +00:00
|
|
|
Samplers are represented by sname:VkSampler handles:
|
|
|
|
|
|
Change log for July 22, 2016 Vulkan 1.0.22 spec update:
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
2016-07-23 10:15:48 +00:00
|
|
|
include::../api/handles/VkSampler.txt[]
|
2016-07-11 01:13:41 +00:00
|
|
|
|
|
|
|
|
// refEnd VkSampler
|
|
|
|
|
|
|
|
|
|
// refBegin vkCreateSampler Create a new sampler object
|
|
|
|
|
|
2016-02-16 09:53:44 +00:00
|
|
|
To create a sampler object, call:
|
|
|
|
|
|
Change log for July 22, 2016 Vulkan 1.0.22 spec update:
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
2016-07-23 10:15:48 +00:00
|
|
|
include::../api/protos/vkCreateSampler.txt[]
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
* pname:device is the logical device that creates the sampler.
|
|
|
|
|
* pname:pCreateInfo is a pointer to an instance of the
|
|
|
|
|
slink:VkSamplerCreateInfo structure specifying the state of the sampler
|
|
|
|
|
object.
|
|
|
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
|
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
|
|
|
* pname:pSampler points to a sname:VkSampler handle in which the resulting
|
|
|
|
|
sampler object is returned.
|
|
|
|
|
|
|
|
|
|
include::../validity/protos/vkCreateSampler.txt[]
|
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
// refBegin VkSamplerCreateInfo Structure specifying parameters of a newly created sampler
|
2016-07-11 01:13:41 +00:00
|
|
|
|
2016-04-21 08:08:38 +00:00
|
|
|
The sname:VkSamplerCreateInfo structure is defined as:
|
2016-02-16 09:53:44 +00:00
|
|
|
|
Change log for July 22, 2016 Vulkan 1.0.22 spec update:
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
2016-07-23 10:15:48 +00:00
|
|
|
include::../api/structs/VkSamplerCreateInfo.txt[]
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
* pname:sType is the type of this structure.
|
|
|
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
|
|
|
* pname:flags is reserved for future use.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* pname:magFilter is the magnification filter to apply to lookups, and is
|
|
|
|
|
of type:
|
2016-02-16 09:53:44 +00:00
|
|
|
+
|
|
|
|
|
--
|
2016-09-17 04:22:17 +00:00
|
|
|
// refBegin VkFilter Specify filters used for texture lookups
|
Change log for July 22, 2016 Vulkan 1.0.22 spec update:
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
2016-07-23 10:15:48 +00:00
|
|
|
include::../api/enums/VkFilter.txt[]
|
2017-03-25 08:46:58 +00:00
|
|
|
|
|
|
|
|
ifdef::editing-notes[]
|
|
|
|
|
[NOTE]
|
|
|
|
|
.editing-note
|
|
|
|
|
====
|
|
|
|
|
(Jon) Missing a description of the enums here.
|
|
|
|
|
====
|
|
|
|
|
endif::editing-notes[]
|
2016-02-16 09:53:44 +00:00
|
|
|
--
|
|
|
|
|
* pname:minFilter is the minification filter to apply to lookups, and is
|
|
|
|
|
of type elink:VkFilter.
|
|
|
|
|
* pname:mipmapMode is the mipmap filter to apply to lookups as described
|
Change log for February 25, 2015 Vulkan 1.0.4 spec update:
* Bump API patch number from 3 to 4 for the first public update to the
spec. Add patch number to the spec title (this will be done
automatically from XML, later).
* Fixes for numerous editorial issues. Regularize descriptions of
variable-length array queries. Properly tag enumerants so they come
out in the right font (many were mislabeled in usage tags in vk.xml,
or not tagged). Spelling and markup corrections (public issue 4).
* Fix typos and clearly separate description of different types of
memory areas (public issue 5).
* Use standards-compliant preprocessor guard symbols on headers
(public issue 7).
* Note that Github users can't currently set labels on issues, and
recommend a fallback approach (public issue 15).
* Use latexmath prefix on len= attributes (public issue 29).
* Make flink:vkCmdUpdateBuffer pname:dataSize limit consistent (public
issue 65).
* Add VK_KHR_mirror_clamp_to_edge extension to core API branch, as an
optional feature not introducing new commands or enums (internal
issue 104).
* Cleanup invariance language inherited from the GL specification to
not refer to nonexistent (GL-specific) state (internal issue 111).
* Modify the flink:vkCmdDrawIndexed pname:vertexOffset definition to
not be the "base offset within the index buffer" but rather the
"value added to the vertex index before indexing into the vertex
buffer" (internal issue 118).
* Fix drawing chapter in the "Programmable Primitive Shading" section
where it described categories of drawing commands. It referenced
flink:vkCmdDrawIndexed twice. Replace the second reference with
flink:vkCmdDrawIndexedIndirect (internal issue 119).
* Typo fixed in <<sparsememory-examples-advanced,Advanced Sparse
Resources>> sparse memory example (internal issue 122).
* Add flink:VkDisplayPlaneAlphaFlagsKHR to <require> section of
VK_KHR_display extension (internal issue 125)
* Add missing optional="false,true" to
flink:vkGetImageSparseMemoryRequirements
pname:pSparseMemoryRequirementCount parameter (internal issue 132)
* Rename ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CREATE_INFO_EXT to
ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CALLBACK_CREATE_INFO_EXT
(internal issue 133)
* Fix a handful of broken cross-references in the
<<samplers,Samplers>> chapter (internal issue 134).
* Fix "Input Attachement" GLSL example to use correct syntax (internal
issue 135).
* Update XML schema and documentation to accomodate recently added
attributes for validity. Add some introductory material describing
design choices and pointing to the public repository to file issues.
* Put include of validity in the core spec extensions chapter on its
own line, so that asciidoc is happy.
* Fix vertexOffset language to specify that it's the value added to
the vertex index before indexing into the vertex buffer, not the
base offset within the index buffer.
* Fix error in the description of flink:vkCmdNextSubpass.
2016-02-25 06:02:34 +00:00
|
|
|
in the <<textures-texel-filtering, Texel Filtering>> section, and is of
|
2016-02-16 09:53:44 +00:00
|
|
|
type:
|
|
|
|
|
+
|
|
|
|
|
--
|
2016-09-17 04:22:17 +00:00
|
|
|
// refBegin VkSamplerMipmapMode Specify mipmap mode used for texture lookups
|
Change log for July 22, 2016 Vulkan 1.0.22 spec update:
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
2016-07-23 10:15:48 +00:00
|
|
|
include::../api/enums/VkSamplerMipmapMode.txt[]
|
2017-03-25 08:46:58 +00:00
|
|
|
|
|
|
|
|
ifdef::editing-notes[]
|
|
|
|
|
[NOTE]
|
|
|
|
|
.editing-note
|
|
|
|
|
====
|
|
|
|
|
(Jon) Missing a description of the enums here.
|
|
|
|
|
====
|
|
|
|
|
endif::editing-notes[]
|
2016-02-16 09:53:44 +00:00
|
|
|
--
|
|
|
|
|
* pname:addressModeU is the addressing mode for outside [0..1] range for U
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
coordinate.
|
|
|
|
|
See elink:VkSamplerAddressMode.
|
2016-02-16 09:53:44 +00:00
|
|
|
* pname:addressModeV is the addressing mode for outside [0..1] range for V
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
coordinate.
|
|
|
|
|
See elink:VkSamplerAddressMode.
|
2016-02-16 09:53:44 +00:00
|
|
|
* pname:addressModeW is the addressing mode for outside [0..1] range for W
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
coordinate.
|
|
|
|
|
See elink:VkSamplerAddressMode.
|
2016-02-16 09:53:44 +00:00
|
|
|
* [[samplers-mipLodBias]] pname:mipLodBias is the bias to be added to
|
|
|
|
|
mipmap LOD calculation and bias provided by image sampling functions in
|
|
|
|
|
SPIR-V, as described in the <<textures-level-of-detail-operation,
|
|
|
|
|
Level-of-Detail Operation>> section.
|
|
|
|
|
* [[samplers-maxAnisotropy]] pname:anisotropyEnable is ename:VK_TRUE to
|
|
|
|
|
enable anisotropic filtering, as described in the
|
Change log for February 25, 2015 Vulkan 1.0.4 spec update:
* Bump API patch number from 3 to 4 for the first public update to the
spec. Add patch number to the spec title (this will be done
automatically from XML, later).
* Fixes for numerous editorial issues. Regularize descriptions of
variable-length array queries. Properly tag enumerants so they come
out in the right font (many were mislabeled in usage tags in vk.xml,
or not tagged). Spelling and markup corrections (public issue 4).
* Fix typos and clearly separate description of different types of
memory areas (public issue 5).
* Use standards-compliant preprocessor guard symbols on headers
(public issue 7).
* Note that Github users can't currently set labels on issues, and
recommend a fallback approach (public issue 15).
* Use latexmath prefix on len= attributes (public issue 29).
* Make flink:vkCmdUpdateBuffer pname:dataSize limit consistent (public
issue 65).
* Add VK_KHR_mirror_clamp_to_edge extension to core API branch, as an
optional feature not introducing new commands or enums (internal
issue 104).
* Cleanup invariance language inherited from the GL specification to
not refer to nonexistent (GL-specific) state (internal issue 111).
* Modify the flink:vkCmdDrawIndexed pname:vertexOffset definition to
not be the "base offset within the index buffer" but rather the
"value added to the vertex index before indexing into the vertex
buffer" (internal issue 118).
* Fix drawing chapter in the "Programmable Primitive Shading" section
where it described categories of drawing commands. It referenced
flink:vkCmdDrawIndexed twice. Replace the second reference with
flink:vkCmdDrawIndexedIndirect (internal issue 119).
* Typo fixed in <<sparsememory-examples-advanced,Advanced Sparse
Resources>> sparse memory example (internal issue 122).
* Add flink:VkDisplayPlaneAlphaFlagsKHR to <require> section of
VK_KHR_display extension (internal issue 125)
* Add missing optional="false,true" to
flink:vkGetImageSparseMemoryRequirements
pname:pSparseMemoryRequirementCount parameter (internal issue 132)
* Rename ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CREATE_INFO_EXT to
ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CALLBACK_CREATE_INFO_EXT
(internal issue 133)
* Fix a handful of broken cross-references in the
<<samplers,Samplers>> chapter (internal issue 134).
* Fix "Input Attachement" GLSL example to use correct syntax (internal
issue 135).
* Update XML schema and documentation to accomodate recently added
attributes for validity. Add some introductory material describing
design choices and pointing to the public repository to file issues.
* Put include of validity in the core spec extensions chapter on its
own line, so that asciidoc is happy.
* Fix vertexOffset language to specify that it's the value added to
the vertex index before indexing into the vertex buffer, not the
base offset within the index buffer.
* Fix error in the description of flink:vkCmdNextSubpass.
2016-02-25 06:02:34 +00:00
|
|
|
<<textures-texel-anisotropic-filtering, Texel Anisotropic Filtering>>
|
2016-02-16 09:53:44 +00:00
|
|
|
section, or ename:VK_FALSE otherwise.
|
|
|
|
|
* pname:maxAnisotropy is the anisotropy value clamp.
|
|
|
|
|
* pname:compareEnable is ename:VK_TRUE to enable comparison against a
|
|
|
|
|
reference value during lookups, or ename:VK_FALSE otherwise.
|
|
|
|
|
** Note: Some implementations will default to shader state if this member
|
|
|
|
|
does not match.
|
|
|
|
|
* pname:compareOp is the comparison function to apply to fetched data
|
Change log for February 25, 2015 Vulkan 1.0.4 spec update:
* Bump API patch number from 3 to 4 for the first public update to the
spec. Add patch number to the spec title (this will be done
automatically from XML, later).
* Fixes for numerous editorial issues. Regularize descriptions of
variable-length array queries. Properly tag enumerants so they come
out in the right font (many were mislabeled in usage tags in vk.xml,
or not tagged). Spelling and markup corrections (public issue 4).
* Fix typos and clearly separate description of different types of
memory areas (public issue 5).
* Use standards-compliant preprocessor guard symbols on headers
(public issue 7).
* Note that Github users can't currently set labels on issues, and
recommend a fallback approach (public issue 15).
* Use latexmath prefix on len= attributes (public issue 29).
* Make flink:vkCmdUpdateBuffer pname:dataSize limit consistent (public
issue 65).
* Add VK_KHR_mirror_clamp_to_edge extension to core API branch, as an
optional feature not introducing new commands or enums (internal
issue 104).
* Cleanup invariance language inherited from the GL specification to
not refer to nonexistent (GL-specific) state (internal issue 111).
* Modify the flink:vkCmdDrawIndexed pname:vertexOffset definition to
not be the "base offset within the index buffer" but rather the
"value added to the vertex index before indexing into the vertex
buffer" (internal issue 118).
* Fix drawing chapter in the "Programmable Primitive Shading" section
where it described categories of drawing commands. It referenced
flink:vkCmdDrawIndexed twice. Replace the second reference with
flink:vkCmdDrawIndexedIndirect (internal issue 119).
* Typo fixed in <<sparsememory-examples-advanced,Advanced Sparse
Resources>> sparse memory example (internal issue 122).
* Add flink:VkDisplayPlaneAlphaFlagsKHR to <require> section of
VK_KHR_display extension (internal issue 125)
* Add missing optional="false,true" to
flink:vkGetImageSparseMemoryRequirements
pname:pSparseMemoryRequirementCount parameter (internal issue 132)
* Rename ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CREATE_INFO_EXT to
ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CALLBACK_CREATE_INFO_EXT
(internal issue 133)
* Fix a handful of broken cross-references in the
<<samplers,Samplers>> chapter (internal issue 134).
* Fix "Input Attachement" GLSL example to use correct syntax (internal
issue 135).
* Update XML schema and documentation to accomodate recently added
attributes for validity. Add some introductory material describing
design choices and pointing to the public repository to file issues.
* Put include of validity in the core spec extensions chapter on its
own line, so that asciidoc is happy.
* Fix vertexOffset language to specify that it's the value added to
the vertex index before indexing into the vertex buffer, not the
base offset within the index buffer.
* Fix error in the description of flink:vkCmdNextSubpass.
2016-02-25 06:02:34 +00:00
|
|
|
before filtering as described in the <<textures-depth-compare-operation,
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Depth Compare Operation>> section.
|
|
|
|
|
See elink:VkCompareOp.
|
2016-02-16 09:53:44 +00:00
|
|
|
* pname:minLod and pname:maxLod are the values used to clamp the computed
|
|
|
|
|
level-of-detail value, as described in the
|
|
|
|
|
<<textures-level-of-detail-operation, Level-of-Detail Operation>>
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
section.
|
|
|
|
|
pname:maxLod must: be greater than or equal to pname:minLod.
|
|
|
|
|
* pname:borderColor is the predefined border color to use, as described in
|
|
|
|
|
the <<textures-texel-replacement, Texel Replacement>> section, and is of
|
|
|
|
|
type:
|
2016-02-16 09:53:44 +00:00
|
|
|
+
|
|
|
|
|
--
|
2016-09-17 04:22:17 +00:00
|
|
|
// refBegin VkBorderColor Specify border color used for texture lookups
|
Change log for July 22, 2016 Vulkan 1.0.22 spec update:
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
2016-07-23 10:15:48 +00:00
|
|
|
include::../api/enums/VkBorderColor.txt[]
|
2017-03-25 08:46:58 +00:00
|
|
|
|
|
|
|
|
ifdef::editing-notes[]
|
|
|
|
|
[NOTE]
|
|
|
|
|
.editing-note
|
|
|
|
|
====
|
|
|
|
|
(Jon) Missing a description of the enums here.
|
|
|
|
|
====
|
|
|
|
|
endif::editing-notes[]
|
2016-02-16 09:53:44 +00:00
|
|
|
--
|
|
|
|
|
* [[samplers-unnormalizedCoordinates]] pname:unnormalizedCoordinates
|
|
|
|
|
controls whether to use unnormalized or normalized texel coordinates to
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
address texels of the image.
|
|
|
|
|
When set to ename:VK_TRUE, the range of the image coordinates used to
|
|
|
|
|
lookup the texel is in the range of zero to the image dimensions for x,
|
|
|
|
|
y and z.
|
|
|
|
|
When set to ename:VK_FALSE the range of image coordinates is zero to
|
|
|
|
|
one.
|
|
|
|
|
When pname:unnormalizedCoordinates is ename:VK_TRUE, samplers have the
|
2016-02-16 09:53:44 +00:00
|
|
|
following requirements:
|
|
|
|
|
** pname:minFilter and pname:magFilter must: be equal.
|
|
|
|
|
** pname:mipmapMode must: be ename:VK_SAMPLER_MIPMAP_MODE_NEAREST.
|
|
|
|
|
** pname:minLod and pname:maxLod must: be zero.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
** pname:addressModeU and pname:addressModeV must: each be either
|
|
|
|
|
ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE or
|
2016-02-16 09:53:44 +00:00
|
|
|
ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER.
|
|
|
|
|
** pname:anisotropyEnable must: be ename:VK_FALSE.
|
|
|
|
|
** pname:compareEnable must: be ename:VK_FALSE.
|
|
|
|
|
* When pname:unnormalizedCoordinates is ename:VK_TRUE, images the sampler
|
|
|
|
|
is used with in the shader have the following requirements:
|
|
|
|
|
** The pname:viewType must: be either ename:VK_IMAGE_VIEW_TYPE_1D or
|
|
|
|
|
ename:VK_IMAGE_VIEW_TYPE_2D.
|
|
|
|
|
** The image view must: have a single layer and a single mip level.
|
|
|
|
|
* When pname:unnormalizedCoordinates is ename:VK_TRUE, image built-in
|
|
|
|
|
functions in the shader that use the sampler have the following
|
|
|
|
|
requirements:
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
** The functions must: not use projection.
|
|
|
|
|
** The functions must: not use offsets.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
[NOTE]
|
Change log for April 29, 2016 Vulkan 1.0.12 spec update:
* Bump API patch number and header version number to 12 for this
update.
Github Issues:
* Change valid usage statements intended to be "sub-points" to
be actual sub-points (public issue 66).
* Replace double negation in description of
slink:VkRenderPassBeginInfo::pname:pClearValues (based on public
merge 142).
* Cleanup minor typos in spec, ref pages and XML, including those
proposed in public pull requests 144, 150, 151, 167, 168, 181, and
186.
* Use *strict subset* in describing the partial order of memory
property types for slink:VkMemoryType, and update the style guide
accordingly (public issue 190).
* Fix various "a image" -> "an image" typos (public issue 191).
* Note in the <<fundamentals-validusage,Valid Usage>> and
<<extensions-interactions,Extension Interactions>> sections that
structures defined by extensions which may be passed in structure
chains using the ptext:pNext member must: include initial
ptext:sType and ptext:pNext members (public issue 192).
Internal Issues:
* Remove duplicate language from the description of the pname:fence
parameter to flink:vkQueueSubmit and improve validity language
(internal issue 91).
* Added documentation for "optional" attribute to XML readme.tex/pdf
(internal issue 149).
* Clarify the host-side data validity rules and behavior of
flink:vkFlushMappedMemoryRanges and
flink:vkInvalidateMappedMemoryRanges (internal issue 266).
Other Commits:
* Added clarification to flink:vkCmdFillBuffer regarding the use of
ename:VK_WHOLE_SIZE.
* Fixed and documented implementation of "validextensionstructs"
attribute. in XML processing scripts and readme.tex/pdf.
* Add missing validity statements to flink:vkResetEvent and
flink:vkCmdResetEvent.
* Fix validity for the
ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT flag.
Correct all the draw/dispatch commands to mention optimally tiled
images as well as linear tiled images, and say image VIEWS instead
of images. Add validity statement to flink:vkCmdBlitImage
* Replace the {apiname} macro with hardcoded "Vulkan", now that we've
committed to that name.
* Add the VK_AMD_rasterization_order extension to vk.xml.
2016-04-29 12:53:46 +00:00
|
|
|
.Mapping of OpenGL to Vulkan filter modes
|
2016-02-16 09:53:44 +00:00
|
|
|
==================
|
|
|
|
|
pname:magFilter values of ename:VK_FILTER_NEAREST and ename:VK_FILTER_LINEAR
|
|
|
|
|
directly correspond to code:GL_NEAREST and code:GL_LINEAR magnification
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
filters.
|
|
|
|
|
pname:minFilter and pname:mipmapMode combine to correspond to the similarly
|
|
|
|
|
named OpenGL minification filter of code:GL_minFilter_MIPMAP_mipmapMode
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
(e.g. pname:minFilter of ename:VK_FILTER_LINEAR and pname:mipmapMode of
|
2016-02-16 09:53:44 +00:00
|
|
|
ename:VK_SAMPLER_MIPMAP_MODE_NEAREST correspond to
|
|
|
|
|
code:GL_LINEAR_MIPMAP_NEAREST).
|
|
|
|
|
|
Change log for April 29, 2016 Vulkan 1.0.12 spec update:
* Bump API patch number and header version number to 12 for this
update.
Github Issues:
* Change valid usage statements intended to be "sub-points" to
be actual sub-points (public issue 66).
* Replace double negation in description of
slink:VkRenderPassBeginInfo::pname:pClearValues (based on public
merge 142).
* Cleanup minor typos in spec, ref pages and XML, including those
proposed in public pull requests 144, 150, 151, 167, 168, 181, and
186.
* Use *strict subset* in describing the partial order of memory
property types for slink:VkMemoryType, and update the style guide
accordingly (public issue 190).
* Fix various "a image" -> "an image" typos (public issue 191).
* Note in the <<fundamentals-validusage,Valid Usage>> and
<<extensions-interactions,Extension Interactions>> sections that
structures defined by extensions which may be passed in structure
chains using the ptext:pNext member must: include initial
ptext:sType and ptext:pNext members (public issue 192).
Internal Issues:
* Remove duplicate language from the description of the pname:fence
parameter to flink:vkQueueSubmit and improve validity language
(internal issue 91).
* Added documentation for "optional" attribute to XML readme.tex/pdf
(internal issue 149).
* Clarify the host-side data validity rules and behavior of
flink:vkFlushMappedMemoryRanges and
flink:vkInvalidateMappedMemoryRanges (internal issue 266).
Other Commits:
* Added clarification to flink:vkCmdFillBuffer regarding the use of
ename:VK_WHOLE_SIZE.
* Fixed and documented implementation of "validextensionstructs"
attribute. in XML processing scripts and readme.tex/pdf.
* Add missing validity statements to flink:vkResetEvent and
flink:vkCmdResetEvent.
* Fix validity for the
ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT flag.
Correct all the draw/dispatch commands to mention optimally tiled
images as well as linear tiled images, and say image VIEWS instead
of images. Add validity statement to flink:vkCmdBlitImage
* Replace the {apiname} macro with hardcoded "Vulkan", now that we've
committed to that name.
* Add the VK_AMD_rasterization_order extension to vk.xml.
2016-04-29 12:53:46 +00:00
|
|
|
There are no Vulkan filter modes that directly correspond to OpenGL
|
2016-04-21 08:08:38 +00:00
|
|
|
minification filters of code:GL_LINEAR or code:GL_NEAREST, but they can: be
|
2016-02-16 09:53:44 +00:00
|
|
|
emulated using ename:VK_SAMPLER_MIPMAP_MODE_NEAREST, pname:minLod = 0, and
|
|
|
|
|
pname:maxLod = 0.25, and using pname:minFilter = ename:VK_FILTER_LINEAR or
|
|
|
|
|
pname:minFilter = ename:VK_FILTER_NEAREST, respectively.
|
|
|
|
|
|
|
|
|
|
Note that using a pname:maxLod of zero would cause
|
|
|
|
|
<<textures-texel-filtering,magnification>> to always be performed, and the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
pname:magFilter to always be used.
|
|
|
|
|
This is valid, just not an exact match for OpenGL behavior.
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
Clamping the maximum LOD to 0.25 allows the [eq]#{lambda}# value to be
|
|
|
|
|
non-zero and minification to be performed, while still always rounding down
|
|
|
|
|
to the base level.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
If the pname:minFilter and pname:magFilter are equal, then using a
|
|
|
|
|
pname:maxLod of zero also works.
|
2016-02-16 09:53:44 +00:00
|
|
|
==================
|
|
|
|
|
|
|
|
|
|
pname:addressModeU, pname:addressModeV, and pname:addressModeW must: each
|
|
|
|
|
have one of the following values:
|
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
// refBegin VkSamplerAddressMode Specify behavior of sampling with texture coordinates outside an image
|
Change log for July 22, 2016 Vulkan 1.0.22 spec update:
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
2016-07-23 10:15:48 +00:00
|
|
|
include::../api/enums/VkSamplerAddressMode.txt[]
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
These values control the behavior of sampling with coordinates outside the
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
range [eq]#[0,1]# for the respective u, v, or w coordinate as defined in the
|
|
|
|
|
<<textures-wrapping-operation, Wrapping Operation>> section.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
* ename:VK_SAMPLER_ADDRESS_MODE_REPEAT indicates that the repeat wrap mode
|
|
|
|
|
will be used.
|
|
|
|
|
* ename:VK_SAMPLER_ADDRESS_MODE_MIRRORED_REPEAT indicates that the
|
|
|
|
|
mirrored repeat wrap mode will be used.
|
|
|
|
|
* ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE indicates that the clamp to
|
|
|
|
|
edge wrap mode will be used.
|
|
|
|
|
* ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER indicates that the clamp
|
|
|
|
|
to border wrap mode will be used.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* ename:VK_SAMPLER_ADDRESS_MODE_MIRROR_CLAMP_TO_EDGE indicates that the
|
|
|
|
|
mirror clamp to edge wrap mode will be used.
|
|
|
|
|
This is only valid if the +VK_KHR_mirror_clamp_to_edge+ extension is
|
|
|
|
|
enabled.
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
The maximum number of sampler objects which can: be simultaneously created
|
|
|
|
|
on a device is implementation-dependent and specified by the
|
|
|
|
|
<<features-limits-maxSamplerAllocationCount,pname:maxSamplerAllocationCount>>
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
member of the sname:VkPhysicalDeviceLimits structure.
|
|
|
|
|
If pname:maxSamplerAllocationCount is exceeded, fname:vkCreateSampler will
|
2016-02-16 09:53:44 +00:00
|
|
|
return ename:VK_ERROR_TOO_MANY_OBJECTS.
|
|
|
|
|
|
|
|
|
|
Since sname:VkSampler is a non-dispatchable handle type, implementations
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
may: return the same handle for sampler state vectors that are identical.
|
|
|
|
|
In such cases, all such objects would only count once against the
|
2016-02-16 09:53:44 +00:00
|
|
|
pname:maxSamplerAllocationCount limit.
|
|
|
|
|
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
.Valid Usage
|
|
|
|
|
****
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-mipLodBias-01069]]
|
|
|
|
|
The absolute value of pname:mipLodBias must: be less than or equal to
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
sname:VkPhysicalDeviceLimits::pname:maxSamplerLodBias
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-anisotropyEnable-01070]]
|
|
|
|
|
If the <<features-features-samplerAnisotropy,anisotropic sampling>>
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
feature is not enabled, pname:anisotropyEnable must: be ename:VK_FALSE
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-anisotropyEnable-01071]]
|
|
|
|
|
If pname:anisotropyEnable is ename:VK_TRUE, pname:maxAnisotropy must: be
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
between `1.0` and
|
|
|
|
|
sname:VkPhysicalDeviceLimits::pname:maxSamplerAnisotropy, inclusive
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01072]]
|
|
|
|
|
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:minFilter and
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
pname:magFilter must: be equal
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01073]]
|
|
|
|
|
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:mipmapMode
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
must: be ename:VK_SAMPLER_MIPMAP_MODE_NEAREST
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01074]]
|
|
|
|
|
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:minLod and
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
pname:maxLod must: be zero
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01075]]
|
|
|
|
|
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:addressModeU
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
and pname:addressModeV must: each be either
|
|
|
|
|
ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE or
|
|
|
|
|
ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01076]]
|
|
|
|
|
If pname:unnormalizedCoordinates is ename:VK_TRUE,
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
pname:anisotropyEnable must: be ename:VK_FALSE
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01077]]
|
|
|
|
|
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:compareEnable
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
must: be ename:VK_FALSE
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-addressModeU-01078]]
|
|
|
|
|
If any of pname:addressModeU, pname:addressModeV or pname:addressModeW
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
are ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER, pname:borderColor
|
|
|
|
|
must: be a valid elink:VkBorderColor value
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-addressModeU-01079]]
|
|
|
|
|
If the +VK_KHR_sampler_mirror_clamp_to_edge+ extension is not enabled,
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
pname:addressModeU, pname:addressModeV and pname:addressModeW must: not
|
|
|
|
|
be ename:VK_SAMPLER_ADDRESS_MODE_MIRROR_CLAMP_TO_EDGE
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-compareEnable-01080]]
|
|
|
|
|
If pname:compareEnable is ename:VK_TRUE, pname:compareOp must: be a
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
valid elink:VkCompareOp value
|
|
|
|
|
ifdef::VK_IMG_filter_cubic[]
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-VkSamplerCreateInfo-magFilter-01081]]
|
|
|
|
|
If either pname:magFilter or pname:minFilter is
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
ename:VK_FILTER_CUBIC_IMG, pname:anisotropyEnable must: be
|
|
|
|
|
ename:VK_FALSE
|
|
|
|
|
endif::VK_IMG_filter_cubic[]
|
|
|
|
|
****
|
|
|
|
|
|
2016-07-11 01:13:41 +00:00
|
|
|
include::../validity/structs/VkSamplerCreateInfo.txt[]
|
|
|
|
|
|
|
|
|
|
// refBegin vkDestroySampler Destroy a sampler object
|
|
|
|
|
|
2016-02-16 09:53:44 +00:00
|
|
|
To destroy a sampler, call:
|
|
|
|
|
|
Change log for July 22, 2016 Vulkan 1.0.22 spec update:
* Bump API patch number and header version number to 22 for this update.
Github Issues:
* Translate the subpass self-dependency language into concrete
validity statements, and added a validity statement about the
restrictions on layout parameters (public issue 267).
* Add validity requirement that
slink:VkAttachmentDescription::pname:finalLayout and
slink:VkAttachmentReference::pname:layout must not be
ename:VK_IMAGE_LAYOUT_UNDEFINED or
ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268).
* Clarify that slink:VkSubpassDescription::pname:pResolveAttachments
layouts are used. Make language consistent with other attachment
arrays (public issue 270).
* Changed 64-bit definition for
dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in
+vk.xml+ and the resulting +vulkan.h+ (public issue 282).
* Add missing error return code for
flink:vkEnumerateInstanceExtensionProperties and
flink:vkEnumerateDeviceExtensionProperties (public issue 285)
* Fix several cases of stext::VkStructName.memberName markup to
stext::VkStructName::pname:memberName, to match other usage in the
spec, and describe this markup in the style guide (public issue
286).
* Modified validity language generation script to avoid redundant
common ancestor language if covered by generic parent language, and
used `Both' instead of `Each' when appropriate (public issue 288).
Internal Issues:
* Add language about behavior of flink:vkAllocateDescriptorSets when
allocation fails due to fragmentation, a new error
ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation
(internal issue 309).
* For the features of code:PointSize, code:ClipDistance, and
code:CullDistance, the SPIR-V capability is required to be declared
on use (read or write) rather than on decoration (internal issue
359).
* Have desktop versions of GLSL respect precision qualification
(code:mediump and code:lowp) when compiling for Vulkan. These will
get translated to SPIR-V's code:RelaxedPrecision decoration as they
do with OpenGL ES versions of GLSL (ESSL). The default precision of
all types is code:highp when using a desktop version (internal issue
360).
* Add validity statement for slink:VkImageCreateInfo specifying that
multisampled images must be two-dimensional, optimally tiled, and
with a single mipmap level (internal issue 369).
* Add validity statements to slink:VkImageViewCreateInfo disallowing
creation of images or image views with no supported features. Made
some slink:VkImageViewCreateInfo validity statements more precise
and consistent. Added a Note to the <<features,features>> chapter
about formats with no features (internal issue 371).
* Remove +manpages+ from default build targets. Nroff outputs
containing imbedded latexmath will not render properly. Fixing this
is a lot of work for limited use cases (internal issue 401).
Other Commits:
* Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity
statement to be based on attachment indices rather than the number
of cleared attachments
(Vulkan-LoaderAndValidationLayers/issues/601).
* Convert registry documentation from LaTeX to asciidoc source and
rename from +src/spec/readme.tex+ to +src/spec/registry.txt+.
* Fix lack of Oxford commas in validity language.
* Lots of cleanup of generator scripts and Makefiles to move extension
list for generator into the script arguments instead of the body of
genvk.py, and express better dependencies between XML, scripts, and
generated files.
2016-07-23 10:15:48 +00:00
|
|
|
include::../api/protos/vkDestroySampler.txt[]
|
2016-02-16 09:53:44 +00:00
|
|
|
|
|
|
|
|
* pname:device is the logical device that destroys the sampler.
|
|
|
|
|
* pname:sampler is the sampler to destroy.
|
|
|
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
|
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
|
|
|
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
.Valid Usage
|
|
|
|
|
****
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-vkDestroySampler-sampler-01082]]
|
|
|
|
|
All submitted commands that refer to pname:sampler must: have completed
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
execution
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-vkDestroySampler-sampler-01083]]
|
|
|
|
|
If sname:VkAllocationCallbacks were provided when pname:sampler was
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
created, a compatible set of callbacks must: be provided here
|
Change log for May 20, 2017 Vulkan 1.0.50 spec update:
* Bump API patch number and header version number to 50 for this update.
Github Issues:
* Fix numerous minor issues with the VK_EXT_debug_report extension (public
issues 478, 483, 486, 489, 490).
Internal Issues:
* Update flink:vkAllocateDescriptorSets to specify conditions under which
to return ename:VK_ERROR_FRAGMENTED_POOL or
ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of
out-of-host/out-of-device-memory, and improve the
<<fundamentals-errorcodes, description of those errors (internal issue
654).
* Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal
a single semaphore, and how to deal with that when multiple physical
devices in a logical device need to wait on it (internal issue 730).
* Improve description of pname:pNext chains of
slink:VkPhysicalDeviceImageFormatInfo2KHR and
slink:VkImageFormatProperties2KHR (internal issue 814).
* Clean up math markup issues in the <<textures, Image Operations>>
chapter (internal issue 818).
* Update validusage target to use more robust code for preprocessing, by
making direct use of Asciidoctor's preprocessor. Added uniqueItems check
to JSON vu schema and add clean_validusage target (internal issue 826).
* Update style guide to prohibit writing non-self-contained (on a single
bullet point) Valid Usage statements, and modify offending Valid Usage
statements in the Specification to match, to assist with automatic
extraction for the validation layers (internal issue 828).
* Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT
of the `VK_EXT_validation_flags` extension, to selectively disable
shader validation.
* Remove duplicate valid usage statement for slink:VkImageMemoryBarrier.
* Modify reflow.py script to place VUID tag anchors standalone on a line
following their corresponding bullet point, and reflow the spec text
accordingly (this had been pending since the initial tag deployment).
New Extensions:
* `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
|
|
|
* [[VUID-vkDestroySampler-sampler-01084]]
|
|
|
|
|
If no sname:VkAllocationCallbacks were provided when pname:sampler was
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
created, pname:pAllocator must: be `NULL`
|
|
|
|
|
****
|
|
|
|
|
|
2016-02-16 09:53:44 +00:00
|
|
|
include::../validity/protos/vkDestroySampler.txt[]
|