Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
// Copyright (c) 2014-2017 The Khronos Group Inc.
|
2016-09-17 04:22:17 +00:00
|
|
|
// Copyright notice at https://www.khronos.org/registry/speccopyright.html
|
|
|
|
|
|
|
|
|
|
[[VK_KHR_android_surface]]
|
2016-08-28 10:47:19 +00:00
|
|
|
== VK_KHR_android_surface
|
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
*Name String*::
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
+VK_KHR_android_surface+
|
2016-09-17 04:22:17 +00:00
|
|
|
*Extension Type*::
|
|
|
|
|
Instance extension
|
|
|
|
|
*Registered Extension Number*::
|
|
|
|
|
9
|
|
|
|
|
*Last Modified Date*::
|
2016-11-12 11:23:34 +00:00
|
|
|
2016-01-14
|
2016-09-17 04:22:17 +00:00
|
|
|
*Revision*::
|
|
|
|
|
6
|
2016-08-28 10:47:19 +00:00
|
|
|
*IP Status*::
|
2016-09-17 04:22:17 +00:00
|
|
|
No known IP claims.
|
2016-08-28 10:47:19 +00:00
|
|
|
*Dependencies*::
|
2016-09-17 04:22:17 +00:00
|
|
|
- This extension is written against version 1.0 of the Vulkan API.
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
- Requires +VK_KHR_surface+.
|
2016-08-28 10:47:19 +00:00
|
|
|
*Contributors*::
|
|
|
|
|
- Patrick Doane, Blizzard
|
|
|
|
|
- Jason Ekstrand, Intel
|
|
|
|
|
- Ian Elliott, LunarG
|
|
|
|
|
- Courtney Goeltzenleuchter, LunarG
|
|
|
|
|
- Jesse Hall, Google
|
|
|
|
|
- James Jones, NVIDIA
|
|
|
|
|
- Antoine Labour, Google
|
|
|
|
|
- Jon Leech, Khronos
|
|
|
|
|
- David Mao, AMD
|
|
|
|
|
- Norbert Nopper, Freescale
|
|
|
|
|
- Alon Or-bach, Samsung
|
|
|
|
|
- Daniel Rakos, AMD
|
|
|
|
|
- Graham Sellers, AMD
|
|
|
|
|
- Ray Smith, ARM
|
|
|
|
|
- Jeff Vigil, Qualcomm
|
|
|
|
|
- Chia-I Wu, LunarG
|
|
|
|
|
*Contacts*::
|
|
|
|
|
- Jesse Hall, Google
|
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
The +VK_KHR_android_surface+ extension is an instance extension.
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
It provides a mechanism to create a slink:VkSurfaceKHR object (defined by
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
the +VK_KHR_surface+ extension) that refers to an code:ANativeWindow,
|
|
|
|
|
Android's native surface type.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
The code:ANativeWindow represents the producer endpoint of any buffer queue,
|
|
|
|
|
regardless of consumer endpoint.
|
|
|
|
|
Common consumer endpoints for code:ANativeWindows are the system window
|
|
|
|
|
compositor, video encoders, and application-specific compositors importing
|
|
|
|
|
the images through a SurfaceTexture.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
=== New Object Types
|
|
|
|
|
|
|
|
|
|
None
|
|
|
|
|
|
|
|
|
|
=== New Enum Constants
|
|
|
|
|
|
|
|
|
|
* Extending ename:VkStructureType:
|
|
|
|
|
** ename:VK_STRUCTURE_TYPE_ANDROID_SURFACE_CREATE_INFO_KHR
|
|
|
|
|
|
|
|
|
|
=== New Enums
|
|
|
|
|
|
|
|
|
|
None
|
|
|
|
|
|
|
|
|
|
=== New Structures
|
|
|
|
|
|
|
|
|
|
* slink:VkAndroidSurfaceCreateInfoKHR
|
|
|
|
|
|
|
|
|
|
=== New Functions
|
|
|
|
|
|
|
|
|
|
* flink:vkCreateAndroidSurfaceKHR
|
|
|
|
|
|
|
|
|
|
=== Issues
|
|
|
|
|
|
|
|
|
|
1) Does Android need a way to query for compatibility between a particular
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
physical device (and queue family?) and a specific Android display?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
*RESOLVED*: No.
|
|
|
|
|
Currently on Android, any GPU is expected to be able to present to the
|
|
|
|
|
system compositor, and all queue families must support the necessary image
|
|
|
|
|
layout transitions and synchronization operations.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
=== Version History
|
|
|
|
|
|
|
|
|
|
* Revision 1, 2015-09-23 (Jesse Hall)
|
|
|
|
|
- Initial draft.
|
|
|
|
|
|
|
|
|
|
* Revision 2, 2015-10-26 (Ian Elliott)
|
|
|
|
|
- Renamed from VK_EXT_KHR_android_surface to VK_KHR_android_surface.
|
|
|
|
|
|
|
|
|
|
* Revision 3, 2015-11-03 (Daniel Rakos)
|
|
|
|
|
- Added allocation callbacks to surface creation function.
|
|
|
|
|
|
|
|
|
|
* Revision 4, 2015-11-10 (Jesse Hall)
|
|
|
|
|
- Removed VK_ERROR_INVALID_ANDROID_WINDOW_KHR.
|
|
|
|
|
|
|
|
|
|
* Revision 5, 2015-11-28 (Daniel Rakos)
|
|
|
|
|
- Updated the surface create function to take a pCreateInfo structure.
|
|
|
|
|
|
|
|
|
|
* Revision 6, 2016-01-14 (James Jones)
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
- Moved VK_ERROR_NATIVE_WINDOW_IN_USE_KHR from the VK_KHR_android_surface
|
|
|
|
|
to the VK_KHR_surface extension.
|